Section 1 - Design Plastic Systems · Analytical Sensor Tee 1.13 Reducer 1.14 ... (DVS 2207-11)...

Section 1

PROGEF® Standard PP Piping System

Featuring Beta PP

Serviced by GF Tustin

Table of Contents

PROGEF® Standard - Featuring Beta PP

Specifications 1.4

Pipe 1.5

IR Plus®/Butt Fusion Fittings

90˚ Elbow 1.6

45˚ Elbow 1.8

Tee 1.9

Molded Reducing Tee 1.10

Fabricated Reducing Tee 1.11

Analytical Sensor Tee 1.13

Reducer 1.14

Flush Style Reducer 1.15

Restraint Fitting 1.17

Union 1.18 Union Accessories 1.19

Instrument Fittings 1.21

Flange Adapters 1.23

Flange Accessories 1.24

Flange Instrument Adapters 1.25

Transition Fittings 1.27

End Caps 1.31

Inline Valve Ports 1.32

Threaded Components/Nipples 1.33

PROG

EF

Stan

dard

PP

Socket Fusion Fittings

90 Elbow 1.34

45 Elbow 1.35

Tee 1.35

Reducer Bushing 1.36

Coupling 1.36

Flange Adapter 1.37

Cap 1.37

Union 1.38

Union Accessories 1.39

Male NPT Adapter 1.40

Female NPT Adapter 1.40

Barrel Nipple 1.41

Hose Adapter 1.41

Valves

Type 315 Diaphragm Valve 1.42

Type319 Zero-Static Valve 1.44

Type 317 Flanged Diaphragm Valve 1.46

Type 314 Union-End Diaphragm Valve 1.48

Type 546 Ball Valve 1.50

Type 343 L-Port/T-Port 3-Way Ball Valve 1.54

Type 360 Ball Check Valve 1.56

Type 567/568 Wafer/Lug Style Butterfly Valve 1.58

Type 522 Needle Valve 1.60

Line Strainer 1.61

1.4

MaterialColourDensitySurface tensionLinear expansion coefficientE-module (tensile strength)Thermal conductivitySurface resistivity

Beta Polypropylene Homopolymer RAL 7032 pebble grey~0.90 g/cm3 (ISO 1183 / ASTM D 792)30–35 mJ/m2

0.15 mm/mK (DIN 53752)1500 N/mm2 (ISO 527 / ASTM D 790)0.23 W/mK (DIN 52612)› 1016 Ω (DIN IEC 60093)

Dimension d 20 (½”)–d 400 (16”) in accordance to EN ISO 15494

Pressure rating Pipes/fittings: PN 10 (d 20–d 400); 150 psiValves: separate specification

Temperature rating from 0 °C to 80 °C (32 °F–176 °F)

Production Fittings: injection molded Pipes: extrudedValves: injection molded

Surface finish Internal Ra m 1.0 µm (39.4 µin) Ra max for injection molded and extruded components

Marking All components are embossed with a permanent identification during the production process to ensure full traceability. Lot NoMaterialDimensionPressure Rating

Testing and inspection (EN ISO 15494)

Visual inspectionSurface finishDimension tolerancePressure testingLeachout

Approvals/conformance(1) FDA CFR 21 177.1520USP 25 class VI (physiological non-toxic)

Welding technology Socket FusionIR Plus®, infrared fusion (DVS 2207-6)BCF®, butt fusion (DVS 2207-11)

Documentation(2) DIN EN 10204 2.2DIN EN 10204 3.1b

Packing Pipes and fittings bulk bagged

Labeling Brand NameProduct Description Code NumberMaterialDimensionCE-labeling

Main applications Uses include economic delivery of lab grade DI water and process cooling water. Highly resistant to impact, abrasion and most chemicals.

(1) For thermoplastic material only(2) on request

PROGEF® Standard-featuring Beta PP – Product Specification

1.5

^ = 40% Restock Charge* = Non-Cancelable / Non-Returnable

Dimensions are subject to change. Please see online "Price Lists" at http://www.gfpiping.com for up-to-date information.

PROG

EF

Stan

dard

PPPipe (A)

d mm

PN Part Number $/meter emm

SP lbs/meter

Closestinch size

16 10 *167 480 710 2.40 1.8 30 0.176 3/8

20 10 *167 480 711 2.90 1.9 30 0.236 ½

25 10 *167 480 712 4.00 2.3 30 0.362 ¾

32 10 *167 480 713 5.60 3.0 40 0.589 1

40 10 *167 480 714 7.50 3.7 25 0.908 1¼

50 10 *167 480 715 11.00 4.6 15 1.407 1½

63 10 *167 480 716 17.50 5.8 10 2.200 2

75 10 *167 480 717 24.50 6.9 5 3.131 2½

90 10 *167 480 718 35.00 8.2 5 4.475 3

110 10 *167 480 719 52.00 10.0 5 6.636 4

160 10 *167 480 722 110.00 14.6 5 14.087 6

200 10 *167 481 724 190.00 18.2 5 21.936 8

225 10 *167 481 725 245.00 20.5 5 27 .778 9

250 10 *167 481 726 305.00 22.8 5 34.171 10

315 10 *167 481 728 455.00 28.7 5 54.233 12

355 10 *167 481 729 725.00 32.2 5 68.784 14

400 10 *167 481 730 850.00 36.3 5 87 .302 16

Note: Cleaned and bagged PP is available upon request

450 mm and 500 mm available

1.6



90° Elbow (A)

Short Radius

IR Plus®/Butt Fusion

d mm

PN Part Number $ emm

SP lbs /each

Lmm

L1mm

20 10 727 108 506 5.90 1.9 10 0.02 38 25

25 10 727 108 507 6.00 2.3 10 0.03 42 26

32 10 727 108 508 6.00 3.0 10 0.05 46 27

40 10 727 108 509 8.00 3.7 10 0.10 51 22

50 10 727 108 510 10.00 4.6 10 0.17 58 23

63 10 727 108 511 14.50 5.8 1 0.30 66 21

Note: Cleaned and bagged PP is available upon request. d

L

L1

L

e

L1

1.7



PROG

EF

Stan

dard

PP90° Elbow (A)

Sweep Radius

IR Plus®/Butt Fusiond mm


SP lbs/each

Lmm

L1mm

Rmm

20 10 727 018 606 8.90 1.9 1 38 23 15

25 10 727 018 607 9.15 2..3 1 42 23 19

32 10 727 018 608 9.15 2.9 1 46 22 24

40 10 727 018 609 12.75 3.7 1 51 21 30

50 10 727 018 610 13.25 4.6 1 58 21 37

63 10 727 018 611 16.80 5.8 1 66 21 45

75 10 727 018 612 21.50 6.9 1 0.37 100 20 90

90 10 727 018 613 30.50 8.2 1 0.64 100 20 90

110 10 727 018 614 58.00 10.0 1 10.18 141 25 130

160 10 727 018 492 131.00 14.6 1 3.56 175 15 160

200 10 727 018 494 240.00 18.2 1 6.88 215 15 200

225 10 727 018 520 296.00 20.5 1 9.41 245 20 225

250 10 *727 018 521 570.00 22.8 1 15.60 256 48 232

315 10 *727 018 523 1,025.00 28.7 1 31.40 321 48 297

355 10 *727 018 574 1,724.00 32.2 1 42.80 380 15 300

400 10 *727 018 575 2,365.00 36.3 1 62.80 435 25 300

Note: Cleaned and bagged PP is available upon request.


1.8



45° Elbow (A)


d mm


SP lbs/each

Lmm

L1mm

20 10 727 158 506 8.50 1.9 10 0.01 32 24

25 10 727 158 507 9.00 2.3 10 0.02 34 25

32 10 727 158 508 11.00 3.0 10 0.04 36 25

40 10 727 158 509 13.50 3.7 10 0.08 39 25

50 10 727 158 510 15.20 4.6 10 0.12 42 26

63 10 727 158 511 25.50 5.8 10 0.21 47 29

75 10 727 158 512 36.00 6.9 1 0.30 49 29

90 10 727 158 513 45.00 8.2 1 0.49 57 34

110 10 727 158 514 82.00 10.0 1 0.91 70 43

160 10 727 158 517 177.00 14.6 1 2.77 100 60

200 10 727 158 519 274.00 18.2 1 5.41 124 75

225 10 727 158 520 311.00 20.5 1 7 .48 140 85

250 10 *727 158 571 884.00 22.8 1 18.11 256 48

315 10 *727 158 573 960.00 28.7 1 23.35 321 48

355 10 *727 158 574 3,120.00 32.2 1 83.60 380 15

400 10 *727 158 575 3,380.00 36.3 1 96.12 435 25



L L1

d

LL1

45°

e

1.9



PROG

EF

Stan

dard

PPTee (A)


d mm


SP lbs/each

Lmm

L1mm

20 10 727 208 506 4.80 1.9 10 0.02 38 24

25 10 727 208 507 4.90 2.3 10 0.04 42 26

32 10 727 208 508 5.90 3.0 10 0.07 46 26

40 10 727 208 509 10.00 3.7 10 0.13 51 22

50 10 727 208 510 14.00 4.6 10 0.23 58 22

63 10 727 208 511 20.00 5.8 1 0.40 66 21

75 10 727 208 512 41.00 6.9 1 0.66 75 20

90 10 727 208 513 59.00 8.2 1 1.16 90 20

110 10 727 208 514 85.00 10.0 1 2.09 110 20

160 10 727 208 517 280.00 14.6 1 6.38 160 28

200 10 727 208 519 435.00 18.2 1 12.2 200 35

225 10 727 208 520 565.00 20.5 1 17.2 220 35

250 10 *727 208 571 725.00 22.8 1 27.5 276 92

315 10 *727 208 573 1,380.00 28.7 1 53.0 353 118

355 10 *727 208 574 2,000.00 32.2 1 68.6 345 103

400 10 *727 208 575 3,000.00 36.3 1 83.8 360 105



d

LL1

LL1

e

L1L

1.10



Molded Reducing Tee (A)


dmm

d1mm


e1mm

SP lbs/ each

L L1 L2 L3

63 32 10 727 208 351 34.50 5.8 3.0 1 0.35 65 70 25 25

63 50 10 727 208 352 34.50 5.8 4.6 1 0.37 65 70 25 25

75 32 10 ^727 208 353 50.00 6.9 3.0 1 0.53 70 75 25 25

75 50 10 ^727 208 354 50.00 6.9 4.6 1 0.55 70 75 25 25

75 63 10 ^727 208 355 50.00 6.9 5.8 1 0.57 70 75 25 25

90 50 10 727 208 357 62.50 8.2 4.6 1 0.90 80 85 25 25

90 63 10 727 208 358 71.00 8.2 5.8 1 0.93 80 85 25 25

90 75 10 ^727 208 359 71.00 8.2 6.9 1 0.97 80 85 25 25

110 32 10 ^727 208 360 90.00 10.0 3.0 1 1.43 90 95 30 25

110 50 10 ^727 208 361 92.00 10.0 4.6 1 1.48 90 95 30 25

110 63 10 ^727 208 362 100.00 10.0 5.8 1 1.50 90 95 30 25

110 75 10 ^727 208 363 104.00 10.0 6.9 1 1.52 90 95 30 25

110 90 10 ^727 208 364 104.00 10.0 8.2 1 1.54 90 95 30 25

160 63 10 ^727 208 371 265.00 14.6 5.8 1 4.68 142 135 50 30

160 75 10 ^727 208 372 270.00 14.6 6.9 1 4.72 142 135 50 30

160 90 10 ^727 208 373 270.00 14.6 8.2 1 4.76 142 135 50 30

160 110 10 ^727 208 374 270.00 14.6 10.0 1 4.85 142 135 50 30

225 90 10 ^727 208 388 615.00 20.5 8.2 1 9.99 155 165 40 30

225 110 10 ^727 208 389 615.00 20.5 10.0 1 9.96 155 165 40 30

225 160 10 ^727 208 391 620.00 20.5 14.6 1 9.99 155 165 40 30


1.11



PROG

EF

Stan

dard

PP

e

L1

d1

d

L

L

e1

Fabricated Reducing Tee (B)


dmm

d1mm


e1mm

Lmm

L1mm

**25 20 10 *727 992 450 163.00 2.3 1.9 42 87

**32 20 10 *727 992 451 164.00 3.0 1.9 46 91

**32 25 10 *727 992 452 164.00 3.0 2.3 46 91

40 20 10 *727 992 453 173.00 3.7 1.9 51 98

40 25 10 *727 992 454 173.00 3.7 2.3 51 99

40 32 10 *727 992 455 173.00 3.7 3.0 51 99

50 20 10 *727 992 456 185.00 4.6 1.9 58 105

50 25 10 *727 992 457 185.00 4.6 2.3 58 106

50 32 10 *727 992 458 185.00 4.6 3.0 58 106

50 40 10 *727 992 459 185.00 4.6 3.7 58 108

63 20 10 *727 992 460 207.00 5.8 1.9 66 113

63 25 10 *727 992 461 207.00 5.8 2.3 66 113

63 32 10 *727 992 462 207.00 5.8 3.0 66 113

63 40 10 *727 992 463 207.00 5.8 3.7 66 115

63 50 10 *727 992 464 207.00 5.8 4.6 66 115

75 20 10 *727 992 465 283.00 6.9 1.9 75 128

75 25 10 *727 992 466 283.00 6.9 2.3 75 129

75 32 10 *727 992 467 283.00 6.9 3.0 75 130

75 40 10 *727 992 468 283.00 6.9 3.7 75 131

75 50 10 *727 992 469 283.00 6.9 4.6 75 132

75 63 10 *727 992 470 283.00 6.9 5.8 75 135

90 20 10 *727 992 471 334.00 8.2 1.9 90 148

90 25 10 *727 992 472 334.00 8.2 2.3 90 149

90 32 10 *727 992 473 334.00 8.2 3.0 90 150

90 40 10 *727 992 474 334.00 8.2 3.7 90 151

90 50 10 *727 992 475 334.00 8.2 4.6 90 152

90 63 10 *727 992 476 334.00 8.2 5.8 90 155

90 75 10 *727 992 477 334.00 8.2 6.9 90 149

110 20 10 *727 992 478 439.00 10.0 1.9 110 178

110 25 10 *727 992 479 439.00 10.0 2.3 110 179

110 32 10 *727 992 480 439.00 10.0 3.0 110 180

110 40 10 *727 992 481 439.00 10.0 3.7 110 181

110 50 10 *727 992 482 439.00 10.0 4.6 110 182

110 63 10 *727 992 483 439.00 10.0 5.8 110 185

110 75 10 *727 992 484 439.00 10.0 6.9 110 179

110 90 10 *727 992 485 439.00 10.0 8.2 110 179

** Uses Molded ReducerContinued on page 1.12

1.12



e

L1

d1

d

L

L

e1

Fabricated Reducing Tee (B)


dmm

d1mm


e1mm

Lmm

L1mm

160 63 10 *727 992 486 662.00 14.6 5.8 160 250

160 75 10 *727 992 487 662.00 14.6 6.9 160 244

160 90 10 *727 992 488 662.00 14.6 8.2 160 244

160 110 10 *727 992 489 662.00 14.6 10.0 160 243

200 63 10 *727 992 490 839.00 18.2 5.8 200 310

200 75 10 *727 992 491 839.00 18.2 6.9 200 304

200 90 10 *727 992 492 839.00 18.2 8.2 200 304

200 110 10 *727 992 493 839.00 18.2 10.0 200 303

200 160 10 *727 992 494 839.00 18.2 14.6 200 311

225 63 10 *727 992 495 1,012.00 20.5 5.8 220 340

225 75 10 *727 992 496 1,012.00 20.5 6.9 220 334

225 90 10 *727 992 497 1,012.00 20.5 8.2 220 334

225 110 10 *727 992 498 1,012.00 20.5 10.0 220 333

225 160 10 *727 992 499 1,012.00 20.5 14.6 220 341

225 200 10 *727 992 500 1,012.00 20.5 18.2 220 339

250 63 10 *727 992 501 1,287.00 22.8 5.8 276 387

250 75 10 *727 992 502 1,287.00 22.8 6.9 276 383

250 90 10 *727 992 503 1,287.00 22.8 8.2 276 384

250 110 10 *727 992 504 1,287.00 22.8 10.0 276 386

250 160 10 *727 992 505 1,287.00 22.8 14.6 276 386

250 200 10 *727 992 506 1,287.00 22.8 18.2 276 386

250 225 10 *727 992 507 1,287.00 22.8 10.5 276 386

315 63 10 *727 992 508 2,312.00 28.7 5.8 353 499

315 75 10 *727 992 509 2,312.00 28.7 6.9 353 495

315 90 10 *727 992 510 2,312.00 28.7 8.2 353 496

315 110 10 *727 992 511 2,312.00 28.7 10.0 353 493

315 160 10 *727 992 512 2,312.00 28.7 14.6 353 493

315 200 10 *727 992 513 2,312.00 28.7 18.2 353 496

315 225 10 *727 992 514 2,312.00 28.7 20.5 353 498

315 250 10 *727 992 515 2,312.00 28.7 22.8 353 502

Continued from page 1.11

1.13

PROG

EF

Stan

dard

PPAnalytical Sensor Tee (B)

Analytical Sanitary SensorFor use when installation of sanitary instrument fittings into full flow fluid contact is required


dmm

Tubeinch

PN Part Number $Qty 1-2

$Qty 3-6

$Qty 7+

emm

SP Lmm

L1mm

L2mm

50 ¾ 10 *727 991 820 236.00 216.00 198.00 4.6 1 147 58 89

50 1 10 *727 991 821 319.00 292.00 268.00 4.6 1 147 58 89

50 1½ 10 *727 991 822 319.00 292.00 268.00 4.6 1 147 58 89

63 ¾ 10 *727 991 823 256.00 235.00 215.00 5.8 1 161 66 95

63 1 10 *727 991 824 339.00 311.00 285.00 5.8 1 161 66 95

63 1½ 10 *727 991 825 339.00 311.00 285.00 5.8 1 161 66 95

75 ¾ 10 *727 991 826 278.00 255.00 234.00 6.9 1 185 75 110

75 1 10 *727 991 827 361.00 331.00 303.00 6..9 1 185 75 110

75 1½ 10 *727 991 828 361.00 331.00 303.00 6.9 1 185 75 110

90 ¾ 10 *727 991 829 303.00 278.00 255.00 8.2 1 215 90 125

90 1 10 *727 991 830 387.00 355.00 325.00 8.2 1 215 90 125

90 1½ 10 *727 991 831 387.00 355.00 325.00 8.2 1 215 90 125

110 ¾ 10 *727 991 832 360.00 330.00 303.00 10.0 1 253 110 143

110 1 10 *727 991 833 454.00 416.00 381.00 10.0 1 253 110 143

110 1½ 10 *727 991 834 454.00 416.00 381.00 10.0 1 253 110 143

Analytical Threaded SensorFor use when installation of threaded instrument fittings into full flow fluid contact

is required


dmm

FNPTinch


$Qty 3-6

$Qty 7+

emm

SP Lmm

L1mm

L2mm

50 ¼ 10 *727 991 840 193.00 177.00 162.00 4.6 1 132 58 74

50 ½ 10 *727 991 841 193.00 177.00 162.00 4.6 1 132 58 74

50 ¾ 10 *727 991 842 193.00 177.00 162.00 4.6 1 132 58 74

50 1 10 *727 991 843 193.00 177.00 162.00 4.6 1 132 58 74

63 ¼ 10 *727 991 844 221.00 203.00 186.00 5.8 1 146 66 80

63 ½ 10 *727 991 845 221.00 203.00 186.00 5.8 1 146 66 80

63 ¾ 10 *727 991 846 221.00 203.00 186.00 5.8 1 146 66 80

63 1 10 *727 991 847 221.00 203.00 186.00 5.8 1 146 66 80

75 ¼ 10 *727 991 848 246.00 226.00 207.00 6.9 1 170 75 95

75 ½ 10 *727 991 849 246.00 226.00 207.00 6.9 1 170 75 95

75 ¾ 10 *727 991 850 246.00 226.00 207.00 6.9 1 170 75 95

75 1 10 *727 991 851 246.00 226.00 207.00 6.9 1 170 75 95

90 ¼ 10 *727 991 852 278.00 255.00 234.00 8.2 1 200 90 110

90 ½ 10 *727 991 853 278.00 255.00 234.00 8.2 1 200 90 110

90 ¾ 10 *727 991 854 278.00 255.00 234.00 8.2 1 200 90 110

90 1 10 *727 991 855 278.00 255.00 234.00 8.2 1 200 90 110

110 ¼ 10 *727 991 856 341.00 313.00 287.00 10.0 1 238 110 128

110 ½ 10 *727 991 857 341.00 313.00 287.00 10.0 1 238 110 128

110 ¾ 10 *727 991 858 341.00 313.00 287.00 10.0 1 238 110 128

110 1 10 *727 991 859 341.00 313.00 287.00 10.0 1 238 110 128

L2L1L

d

e

TUBE

L1

L2L1L

d

e

FNPT

L1

1.14



Reducer (A)


d1mm

d2mm PN Part Number $

e1mm

e2mm SP

lbs /each

Lmm

L1mm

L2mm

25 20 10 727 908 537 6.50 2.3 1.9 10 0.01 50 20 20

32 25 10 727 908 541 7.80 3.0 2.3 10 0.02 50 20 20

32 20 10 727 908 542 7.80 3.0 1.9 10 0.02 50 20 20

40 32 10 727 908 546 9.70 3.7 3.0 10 0.04 55 20 20

40 25 10 727 908 547 9.70 3.7 2.3 10 0.03 55 20 20

40 20 10 727 908 548 9.70 3.7 1.9 10 0.03 58 20 20

50 40 10 727 908 552 11.50 4.6 3.7 10 0.06 60 20 20

50 32 10 727 908 553 11.50 4.6 3.0 10 0.07 60 20 20

50 25 10 727 908 554 11.50 4.6 2.3 10 0.05 60 20 20

63 50 10 727 908 558 14.00 5.8 4.6 10 0.11 65 20 20

63 40 10 727 908 559 14.00 5.8 3.7 10 0.10 65 20 20

63 32 10 727 908 560 14.00 5.8 3.0 10 0.09 65 20 20

75 63 10 727 908 564 18.50 6.9 5.8 10 0.16 65 20 20

75 50 10 727 908 565 18.50 6.9 4.6 10 0.14 65 20 20

75 40 10 727 908 566 18.50 6.9 3.7 10 0.13 68 20 20

90 75 10 727 908 570 20.00 8.2 6.9 1 0.26 75 22 19

90 63 10 727 908 571 20.00 8.2 5.8 1 0.24 75 22 19

110 90 10 727 908 576 25.00 10.0 8.2 1 0.48 90 28 30

110 75 10 727 908 577 25.00 10.0 6.9 1 0.42 90 28 18

160 110 10 727 908 590 46.00 14.6 10.0 1 1.28 120 40 27

200 160 10 727 908 592 165.00 18.2 14.6 1 2.46 145 50 40

225 110 10 727 908 595 212.00 20.5 10.0 1 2.92 160 55 35

225 160 10 727 908 596 177.00 20.5 14.6 1 3.23 160 50 40

225 200 10 727 908 597 150.00 20.5 18.2 1 3.63 160 55 50

250 225 10 ^727 908 987 190.00 22.8 20.5 1 2.30 182 60 55

250 160 10 ^727 908 990 240.00 22.8 14.6 1 3.27 194 60 55

315 250 10 ^727 908 996 297.00 28.7 22.8 1 4.86 230 95 95

315 225 10 ^727 908 997 292.00 28.7 20.5 1 5.77 230 95 85

355 315 10 ^727 908 961 710.00 32.2 28.7 1 8.16 245 90 80

355 250 10 ^727 908 963 800.00 32.2 22.8 1 9.70 245 90 60

400 355 10 ^727 908 965 1,570.00 36.3 32.2 1 10.58 260 95 90

400 315 10 ^727 908 966 2,200.00 36.3 28.7 1 11.69 260 95 80

d 2

e1e2d 1

L

L2L1

1.15



PROG

EF

Stan

dard

PPFlush Style Reducer (B)

For use as a space saving one-step reduction.


d1mm

d2mm


$Qty 3-6

$Qty 7+

e1 mm

e2 mm

SP Lmm

L1 mm

L2 mm

40 20 10 *727 909 604 103.00 95.00 87.00 3.7 1.9 1 52 24 25

40 25 10 *727 909 605 103.00 95.00 87.00 3.7 2.3 1 53 23 26

40 32 10 *727 909 606 103.00 95.00 87.00 3.7 3.0 1 53 22 26

50 20 10 *727 909 607 111.00 102.00 94.00 4.6 1.9 1 52 24 25

50 25 10 *727 909 608 111.00 102.00 94.00 4.6 2.3 1 53 23 26

50 32 10 *727 909 609 111.00 102.00 94.00 4.6 3.0 1 53 22 26

50 40 10 *727 909 610 111.00 102.00 94.00 4.6 3.7 1 55 21 28

63 20 10 *727 909 611 127.00 117.00 107.00 5.8 1.9 1 52 24 25

63 25 10 *727 909 612 127.00 117.00 107.00 5.8 2.3 1 52 23 26

63 32 10 *727 909 613 127.00 117.00 107.00 5.8 3.0 1 52 22 26

63 40 10 *727 909 614 127.00 117.00 107.00 5.8 3.7 1 54 20 28

63 50 10 *727 909 615 127.00 117.00 107.00 5.8 4.6 1 54 19 28

75 20 10 *727 909 616 182.00 167.00 153.00 6.9 1.9 1 58 27 25

75 25 10 *727 909 617 182.00 167.00 153.00 6.9 2.3 1 59 27 26

75 32 10 *727 909 618 182.00 167.00 153.00 6.9 3.0 1 60 27 26

75 40 10 *727 909 619 182.00 167.00 153.00 6.9 3.7 1 61 27 28

75 50 10 *727 909 620 182.00 167.00 153.00 6.9 4.6 1 62 27 28

75 63 10 *727 909 621 182.00 167.00 153.00 6.9 5.8 1 65 28 28

90 20 10 *727 909 622 215.00 198.00 181.00 8.2 1.9 1 63 32 25

90 25 10 *727 909 623 215.00 198.00 181.00 8.2 2.3 1 64 32 26

90 32 10 *727 909 624 215.00 198.00 181.00 8.2 3.0 1 65 32 26

90 40 10 *727 909 625 215.00 198.00 181.00 8.2 3.7 1 66 32 28

90 50 10 *727 909 626 215.00 198.00 181.00 8.2 4.6 1 67 32 28

90 63 10 *727 909 627 215.00 198.00 181.00 8.2 5.8 1 70 33 28

90 75 10 *727 909 628 215.00 198.00 181.00 8.2 6.9 1 64 31 23

110 20 10 *727 909 629 294.00 270.00 248.00 10.0 1.9 1 73 42 25

110 25 10 *727 909 630 294.00 270.00 248.00 10.0 2.3 1 74 42 26

110 32 10 *727 909 631 294.00 270.00 248.00 10.0 3.0 1 75 42 26

110 40 10 *727 909 632 294.00 270.00 248.00 10.0 3.7 1 76 42 28

110 50 10 *727 909 633 294.00 270.00 248.00 10.0 4.6 1 77 42 28

110 63 10 *727 909 634 294.00 270.00 248.00 10.0 5.8 1 80 43 28

110 75 10 *727 909 635 294.00 270.00 248.00 10.0 6.9 1 74 41 23

110 90 10 *727 909 636 294.00 270.00 248.00 10.0 8.2 1 74 39 23

Continued on page 1.16

1.16



Flush Style Reducer (B)

For use as a space saving one-step reduction.


d1mm

d2mm


$Qty 3-6

$Qty 7+

e1 mm

e2 mm

SP Lmm

L1 mm

L2 mm

160 63 10 *727 909 656 322.00 295.00 271.00 14.6 5.8 1 95 58 28

160 75 10 *727 909 657 322.00 295.00 271.00 14.6 6.9 1 89 56 23

160 90 10 *727 909 658 322.00 295.00 271.00 14.6 8.2 1 89 54 23

160 110 10 *727 909 659 322.00 295.00 271.00 14.6 10.0 1 88 50 23

200 63 10 *727 909 662 344.00 315.00 289.00 18.2 5.8 1 115 78 28

200 75 10 *727 909 663 344.00 315.00 289.00 18.2 6.9 1 109 76 23

200 90 10 *727 909 664 344.00 315.00 289.00 18.2 8.2 1 109 74 23

200 110 10 *727 909 665 344.00 315.00 289.00 18.2 10.0 1 108 70 23

200 160 10 *727 909 668 344.00 315.00 289.00 18.2 14.6 1 116 61 33

225 63 10 *727 909 669 387.00 355.00 325.00 20.5 5.8 1 125 88 28

225 75 10 *727 909 670 387.00 355.00 325.00 20.5 6.9 1 119 86 23

225 90 10 *727 909 671 387.00 355.00 325.00 20.5 8.2 1 119 84 23

225 110 10 *727 909 672 387.00 355.00 325.00 20.5 10.0 1 118 80 23

225 160 10 *727 909 675 387.00 355.00 325.00 20.5 14.6 1 126 71 33

225 200 10 *727 909 676 502.00 460.00 422.00 20.5 18.2 1 124 64 33

250 63 10 *727 909 677 502.00 460.00 422.00 22.8 5.8 1 119 85 28

250 75 10 *727 909 678 502.00 460.00 422.00 22.8 6.9 1 115 80 23

250 90 10 *727 909 679 502.00 460.00 422.00 22.8 8.2 1 116 80 23

250 110 10 *727 909 680 502.00 460.00 422.00 22.8 10.0 1 118 80 28

250 160 10 *727 909 683 502.00 460.00 422.00 22.8 14.6 1 118 70 38

250 200 10 *727 909 684 502.00 460.00 422.00 22.8 18.2 1 118 67 38

250 225 10 *727 909 685 502.00 460.00 422.00 22.8 20.5 1 118 64 38

315 63 10 *727 909 696 872.00 799.00 733.00 28.7 5.8 1 154 100 28

315 75 10 *727 909 697 872.00 799.00 733.00 28.7 6.9 1 150 100 23

315 90 10 *727 909 698 872.00 799.00 733.00 28.7 8.2 1 151 100 23

315 110 10 *727 909 699 872.00 799.00 733.00 28.7 10.0 1 148 100 23

315 160 10 *727 909 702 872.00 799.00 733.00 28.7 14.6 1 148 100 33

315 200 10 *727 909 703 872.00 799.00 733.00 28.7 18.2 1 151 100 33

315 225 10 *727 909 704 872.00 799.00 733.00 28.7 20.5 1 153 99 33

315 250 10 *727 909 705 872.00 799.00 733.00 28.7 22.8 1 157 86 48

Continued from page 1.15

1.17



PROG

EF

Stan

dard

PPRestraint Fitting (A)


d mm

psi Part Number $ emm

SP Dmm

Lmm

L1mm

L2mm

20 10 *727 918 656 93.00 1.9 1 28 100 53 32

25 10 *727 918 657 104.00 2.3 1 33 100 53 32

32 10 *727 918 658 108.00 3.0 1 40 100 53 32

40 10 *727 918 659 121.00 3.7 1 48 100 53 32

50 10 *727 918 660 146.00 4.6 1 58 100 53 32

63 10 *727 918 661 160.00 5.8 1 71 105 53 32

75 10 *727 918 662 234.00 6.9 1 87 125 70 40

90 10 *727 918 663 442.00 8.2 1 105 125 70 40

110 10 *727 918 664 455.00 10.0 1 127 125 70 40

1.18



L2

ed

D

L1L

L1

Union (A)


Supplied with: EPDM O-Ring

dmm

PN Part NumberEPDM

$ emm

SP lbs/each

Dmm

Lmm

L1mm

L2mm

G (Thread)inch

20 10 727 518 506 24.00 1.9 10 0.1 48 107 54.0 53.0 1

25 10 727 518 507 29.50 2.3 10 0.2 58 113 57.0 56.0 1¼

32 10 727 518 508 30.00 3.0 10 0.2 65 119 60.0 59.0 1½

40 10 727 518 509 43.00 3.7 5 0.4 79 126 63.0 63.0 2

50 10 727 518 510 53.50 4.6 5 0.5 91 131 65.5 65.5 2¼

63 10 727 518 511 70.50 5.8 1 0.8 111 137 69.0 68.0 2¾

75 10 *727 518 512 113.00 6.9 1 1.2 135 131 66.0 65.5 S107,5x3,6

90 10 *727 518 513 132.00 8.2 1 1.3 135 131 65.5 65.5 S107,5x3,6

110 10 *727 518 514 171.00 10.0 1 1.8 158 131 65.5 65.5 S127,5x3,6


Supplied with: FPM O-Ring

dmm

PN Part NumberFPM

$ emm

SP lbs/each

Dmm

Lmm

L1mm

L2mm

G (Thread)inch

20 10 727 528 506 26.50 1.9 10 0.1 48 107 54.0 53.0 1

25 10 727 528 507 33.00 2.3 10 0.2 58 113 57.0 56.0 1¼

32 10 727 528 508 34.00 3.0 10 0.2 65 119 60.0 59.0 1½

40 10 727 528 509 50.50 3.7 5 0.4 79 126 63.0 63.0 2

50 10 727 528 510 62.00 4.6 5 0.5 91 131 65.5 65.5 2¼

63 10 727 528 511 80.00 5.8 1 0.8 111 137 69.0 68.0 2¾

75 10 *727 528 512 127.00 6.9 1 1.2 135 131 66.0 65.5 S107,5x3,6

90 10 *727 528 513 151.00 8.2 1 1.3 135 131 65.5 65.5 S107,5x3,6

110 10 *727 528 514 195.00 10.0 1 1.8 158 131 65.5 65.5 S127,5x3,6

1.19



PROG

EF

Stan

dard

PPUnion Accessories (A)

Union Blank — PROGEF® Standarddmm

PN Part Number $ SP Amm

Dmm

20 0 ^727 991 881 27.00 1 30 6

25 0 ^727 991 882 28.00 1 38 6

32 0 ^727 991 883 32.00 1 45 6

40 0 ^727 991 884 34.00 1 56 6

50 0 ^727 991 885 41.00 1 63 6

63 0 ^727 991 886 47.00 1 78 6

Non-pressure rated

Union End

Version:

Suitable for Diaphragm Valve Type 314


dmm

PN Part Number $ SP Dmm

Lmm

L1mm

20 10 *727 608 506 6.30 1 30 54 38

25 10 *727 608 507 8.00 1 39 57 42

32 10 *727 608 508 8.00 1 45 60 41

40 10 *727 608 509 13.20 1 57 63 42

50 10 *727 608 510 13.20 1 63 66 44

63 10 *727 608 511 14.50 1 78 69 45

75 10 *727 608 512 21.50 1 101 66 34

90 10 *727 608 513 26.00 1 101 66 45

110 10 *727 608 514 36.00 1 121 66 40

D

A

1.20



Union Accessories (A)

Union BushingJoining Face with O-ring groove


dmm


SP Lmm

L1mm

G (Thread)inch

20 10 *727 648 506 9.00 1.9 1 54 26 1

25 10 *727 648 507 11.40 2.3 1 57 26 1¼

32 10 *727 648 508 11.40 3.0 1 60 25 1½

40 10 *727 648 509 16.80 3.7 1 63 25 2

50 10 *727 648 510 16.80 4.6 1 66 25 2¼

63 10 *727 648 511 19.50 5.8 1 69 25 2¾

75 10 *727 648 512 35.00 6.9 1 66 24 S107.5x3.6

90 10 *727 648 513 46.00 8.2 1 66 24 S107.5x3.6

110 10 *727 648 514 61.00 10.0 1 66 25 S127.5x3.6

Union NutPP glass-fiber reinforced

Used with Socket and IR Unions

dmm


Lmm

G (Thread)inch

20 10 *727 690 406 11.30 1 54 26 1

25 10 *727 690 407 11.50 1 57 26 1¼

32 10 *727 690 408 14.00 1 60 25 1½

40 10 *727 690 409 19.00 1 63 25 2

50 10 *727 690 410 28.50 1 66 25 2¼

63 10 *727 690 411 46.00 1 69 25 2¾

75 10 *727 690 422 58.00 1 66 24 S107.5x3.6

90 10 *727 690 423 69.00 1 66 24 S107.5x3.6

110 10 *727 690 424 90.00 1 66 25 S127.5x3.6

1.21



PROG

EF

Stan

dard

PP

Instrument Fitting (B)

Small DiameterFor use where instrument insertion in small diameter pipe or multiple weld facings is required


dmm


$Qty 3-6

$Qty 7+

emm

SP Lmm

Dmm

Hmm

L1mm

20 10 *727 918 606 307.00 281.00 258.00 1.9 1 140 71 58 40

25 10 *727 918 607 315.00 289.00 265.00 2.3 1 140 75 63 40

32 10 *727 918 608 329.00 302.00 276.00 3.0 1 140 81 70 40

40 10 *727 918 609 336.00 308.00 282.00 3.7 1 140 88 78 40

50 10 *727 918 610 355.00 325.00 298.00 4.6 1 140 97 88 40

Large Diameter


dmm


$Qty 3-6

$Qty 7+

emm

SP Lmm

Dmm

Hmm

L1mm

63 10 *727 918 611 490.00 449.00 412.00 5.8 1 140 109 101 40

75 10 *727 918 612 630.00 578.00 529.00 6.9 1 140 120 113 40

90 10 *727 918 613 630.00 578.00 529.00 8.2 1 140 134 128 40

110 10 *727 918 614 640.00 587.00 538.00 10.0 1 140 153 148 40

160 10 *727 918 567 690.00 633.00 580.00 14.6 1 140 191 187 40

200 10 *727 918 569 740.00 678.00 622.00 18.2 1 140 223 220 40

225 10 *727 918 570 780.00 715.00 655.00 20.5 1 140 243 240 40

Note: • Hole needs to be milled, HAND HELD DRILLING MUST NOT BE DONE • Specify at time of ordering if factory is to mill hole (max. hole diameter is¾") • Add $60.00 list to mill hole. Add “T” to end of part number.

HL1

D

L1

L

e

d

1.22



Instrument Fitting (B)

½" MNPT Low Profile AdapterFor use as a short dead-leg fitting for Gauge Guard installation or for connection to

instruments requiring a½" MNPT connector


dmm


$Qty 3-6

$Qty 7+

emm

SP Lmm

Dmm

H1mm

H2mm

L1mm

20 10 *727 918 626 369.00 338.00 310.00 1.9 1 140 71 28 29 40

25 10 *727 918 627 379.00 347.00 318.00 2.3 1 140 75 31 32 40

32 10 *727 918 628 395.00 362.00 332.00 3.0 1 140 81 34 35 40

40 10 *727 918 629 406.00 372.00 341.00 3.7 1 140 88 38 39 40

50 10 *727 918 630 418.00 383.00 351.00 4.6 1 140 97 43 44 40

63 10 *727 918 631 435.00 399.00 366.00 5.8 1 140 109 50 51 40

75 10 *727 918 632 445.00 408.00 374.00 6.9 1 140 120 56 57 40

90 10 *727 918 633 495.00 454.00 416.00 8.2 1 140 134 63 64 40

110 10 *727 918 634 510.00 468.00 429.00 10.0 1 140 153 73 74 40

¾" (3A) Sanitary AdapterFor use as a short dead-leg fitting for¾" sanitary instrument connections


dmm


$Qty 3-6

$Qty 7+

emm

SP Lmm

Dmm

H1mm

H2mm

L1mm

20 10 *727 918 646 379.00 347.00 318.00 1.9 1 140 71 28 29 40

25 10 *727 918 647 389.00 357.00 327.00 2.3 1 140 75 31 32 40

32 10 *727 918 648 406.00 372.00 341.00 3.0 1 140 81 34 35 40

40 10 *727 918 649 417.00 382.00 350.00 3.7 1 140 88 38 39 40

50 10 *727 918 650 429.00 393.00 360.00 4.6 1 140 97 43 44 40

63 10 *727 918 651 445.00 408.00 374.00 5.8 1 140 109 50 51 40

75 10 *727 918 652 455.00 417.00 382.00 6.9 1 140 120 56 57 40

90 10 *727 918 653 505.00 463.00 424.00 8.2 1 140 134 63 64 40

110 10 *727 918 654 521.00 478.00 438.00 10.0 1 140 153 73 74 40

d

L

L1

D

H1

H2

3/4" SANITARY

eH

2H

1

1/2"MNPT

L

L1

de

D

1.23



PROG

EF

Stan

dard

PPFlange Adapters - ANSI Serrated (A)

Standard Flange Adapter Dimensions 75 - 400 mm not recommended for connection to Butterfly Valves. See “Special

Flange Adapters” below.


d mm

PN Part Number $ e

mm

SP lbs

/each

D

mm

D1

mm

L

mm

L1

mm

L2

mm

20 10 727 798 506 5.60 1.9 10 0.3 26 44 50 7 29

25 10 727 798 657 6.60 2.3 10 0.6 32 54 50 9 24

32 10 727 798 658 7.80 2.9 10 0.1 40 63 54 10 27

40 10 727 798 659 9.00 3.7 10 0.1 49 73 55 11 24

50 10 727 798 660 11.30 4.6 1 0.2 60 82 62 12 30

63 10 727 798 511 12.50 5.8 1 0.3 75 102 68 14 38

75 10 727 798 512 14.50 6.8 1 0.4 89 122 80 16 43

90 10 727 798 663 22.00 8.2 1 0.8 105 133 80 17 28

110 10 727 798 514 26.00 10.0 1 1.0 125 158 80 18 40

160 10 727 798 517 48.00 14.6 1 2.0 175 212 92 25 42

200 10 727 798 519 79.00 18.2 1 4.0 232 268 100 32 34

225 10 727 798 520 90.00 20.5 1 4.0 235 268 100 32 36

250 10 *727 798 571 140.00 22.7 1 6.2 285 320 100 35 25

315 10 *727 798 573 180.00 28.6 1 7.9 335 370 100 35 25

355 10 *727 798 574 320.00 32.2 1 12.4 373 430 120 40 20

400 10 *727 798 575 660.00 36.3 1 18.3 427 482 120 46 29

Special Flange Adapter Suitable for most Butterfly Valves. No post machining required.


d mm


SP lbs/each

angdeg

d1mm

d2mm

d3mm

zmm

Lmm

L1mm

d4mm

75 10 727 798 812 33.00 6.8 1 0.4 30° 89 122 66 80 43 16 100

90 10 727 798 813 40.00 8.2 1 0.8 30° 105 138 78 80 28 17 118

110 10 727 798 814 43.00 10.0 1 1.0 30° 125 158 100 80 28 18 140

160 10 727 798 817 77.00 14.6 1 2.0 25° 175 212 153 92 41 25 168

200 10 727 798 819 112.00 18.2 1 4.0 25° 232 268 208 100 34 32 258

225 10 727 798 820 121.00 20.5 1 4.0 20° 235 268 204 100 36 32 258

250 10 *727 798 821 171.00 22.7 1 6.2 25° 285 320 254 100 25 35 280

315 10 *727 798 823 212.00 28.6 1 7.9 25° 335 370 309 100 35 35 330

355 10 *727 798 824 1,157.00 32.2 1 16.5 NA 380 430 346 155 40 75 -

400 10 *727 798 825 1,940.00 36.3 1 22.7 NA 427 482 404 176 50 82 -

Note: Please contact butterfly valve manufacturer to assure proper clearance between valve and flange adapter.

Dimensions d 75 mm to d 400 mm are not recommended for connection to butterfly valves. See special flange adaptors below.

75 mm to 315 mm

355 mm to 400 mm

1.24



Flange Accessories

Blind Flange (A)dmm

ANSI Part Number $ SP Amm

Bmm

Cmm

Dmm

Emm

Fmm

Gmm

Hmm

IRad

JRad

20 ½ 727 991 362 96.00 1 26 44 28 22 - 16 7 14 1.0 0.4

25 ¾ 727 991 363 110.00 1 32 54 36 29 - 20 9 16 1.5 0.4

32 1 727 991 364 117.00 1 40 63 43 36 - 26 10 17 1.5 0.4

40 1¼ 727 991 365 123.00 1 49 73 54 47 - 33 11 19 2.0 0.4

50 1½ 727 991 366 130.00 1 60 79 64 56 - 41 12 20 2.0 0.4

63 2 727 991 367 135.00 1 75 99 83 75 69 51 14 24 2.5 0.4

75 2½ 727 991 368 158.00 1 89 119 99 91 83 61 16 26 2.5 0.4

90 3 727 991 369 170.00 1 105 133 115 106 97 74 17 27 3.0 0.4

110 4 727 991 370 178.00 1 125 158 138 128 118 90 18 28 3.0 0.5

160 6 *727 991 372 184.00 1 175 200 191 181 171 131 25 38 4.0 1.0

200/225 8/9 *727 991 373 205.00 1 232 268 250 240 230 164 32 48 4.0 1.0

Full-Face Flange Spacer (B)ANSI Size


$Qty 3-6

$Qty 7+

SP Dmm

D1mm

D2mm

D3mm

# Bolt Holes

4 10 *727 991 340 259.00 237.00 218.00 1 229 190 90 19 8

6 10 *727 991 341 298.00 273.00 250.00 1 280 241 131 22 8

8 10 *727 991 342 364.00 334.00 306.00 1 343 298 164 22 8

9 10 *727 991 343 377.00 346.00 317.00 1 343 298 184 22 8

10 10 *727 991 344 432.00 396.00 363.00 1 406 362 204 25 12

12 10 *727 991 345 469.00 430.00 394.00 1 483 432 258 25 12

AB

H

G

1 x 45

CDEF

Y

X

I

R1.0

1.0

J

AB

H

G

1 x 45

CDEF

Y

X

I

R1.0

1.0

J

AB

H

G

1 x 45

CDEF

Y

X

I

R1.0

1.0

J

DD1D2

2”

ØD3

1.25



PROG

EF

Stan

dard

PPFlange Instrument Adapters (B)

Wafer BlankFor use between two flange adapters as a "Space-saver" for future addition of Butterfly Valves

or future tapping port

dmm


$Qty 3-6

$Qty 7+

SP Lmm

L1mm

Dmm

D1mm

50 10 *727 991 950 174.00 160.00 146.00 1 71 35 40 82

63 10 *727 991 951 181.00 166.00 152.00 1 94 47 51 102

75 10 *727 991 952 197.00 181.00 166.00 1 115 57 61 121

90 10 *727 991 953 201.00 184.00 169.00 1 127 63 73 133

110 10 *727 991 954 204.00 187.00 171.00 1 153 76 90 158

160 10 *727 991 955 215.00 197.00 181.00 1 208 104 130 212

200 10 *727 991 956 319.00 292.00 268.00 1 265 132 163 268

225 10 *727 991 957 319.00 292.00 268.00 1 265 132 184 268

250 10 *727 991 958 366.00 336.00 308.00 1 317 158 204 320

315 10 *727 991 959 429.00 393.00 360.00 1 368 184 257 370

Wafer (Pre-drilled) with ½" FNPTFor use as pre-manufactured instrument ports between two flange adapters

d PSI FNPT Part Number

$Qty 1-2

$Qty 3-6

$Qty 7+

SP Lmm

L1mm

Dmm

D1mm

50 10 *727 992 260 216.00 198.00 182.00 1 71 35 40 82

63 10 *727 992 261 223.00 204.00 187.00 1 94 47 51 102

75 10 *727 992 262 239.00 219.00 201.00 1 115 57 61 121

90 10 *727 992 263 242.00 222.00 203.00 1 127 63 73 133

110 10 *727 992 264 246.00 226.00 207.00 1 153 76 90 158

160 10 *727 992 265 257.00 236.00 216.00 1 208 104 130 212

200 10 *727 992 266 361.00 331.00 303.00 1 265 132 163 268

225 10 *727 992 267 361.00 331.00 303.00 1 265 132 184 268

250 10 *727 992 268 408.00 374.00 343.00 1 317 158 204 320

315 10 *727 992 269 470.00 431.00 395.00 1 368 184 257 370

Wafer (Pre-drilled) with ½" MNPTFor use as pre-manufactured instrument ports between two flange adapters

d PSI MNPT Part Number

$Qty 1-2

$Qty 3-6

$Qty 7+

SP Lmm

L1mm

Dmm

D1mm

50 10 *727 992 270 185.00 170.00 155.00 1 71 35 40 82

63 10 *727 992 271 192.00 176.00 161.00 1 94 47 51 102

75 10 *727 992 272 208.00 191.00 175.00 1 115 57 61 121

90 10 *727 992 273 212.00 194.00 178.00 1 127 63 73 133

110 10 *727 992 274 215.00 197.00 181.00 1 153 76 90 158

160 10 *727 992 275 226.00 207.00 190.00 1 208 104 130 212

200 10 *727 992 276 334.00 306.00 281.00 1 265 132 163 268

225 10 *727 992 277 334.00 306.00 281.00 1 265 132 184 268

250 10 *727 992 278 363.00 333.00 305.00 1 317 158 204 320

315 10 *727 992 279 447.00 410.00 376.00 1 368 184 257 370

40 40

L

ØD1

L1ØD

ØD1

L

40

L1

40

ØD

40 40

L1

ØD1

ØD

L

1.26



Flange Instrument Adapters (B)

Wafer VentFor use between two flange adapters

d mm PN Part Number $Qty 1-2

$Qty 3-6

$Qty 7+

Lmm

50 10 *727 991 960 372.00 341.00 313.00 84

63 10 *727 991 961 379.00 347.00 318.00 95

75 10 *727 991 962 395.00 362.00 332.00 106

90 10 *727 991 963 398.00 365.00 335.00 112

110 10 *727 991 964 402.00 369.00 338.00 125

160 10 *727 991 965 413.00 379.00 347.00 153

200 10 *727 991 966 521.00 477.00 438.00 181

225 10 *727 991 967 521.00 477.00 438.00 181

250 10 *727 991 968 549.00 504.00 462.00 207

315 10 *727 991 969 634.00 581.00 532.00 232

Wafer DrainFor use between two flange adapters

dmm


$Qty 3-6

$Qty 7+

Lmm

50 10 *727 991 970 372.00 341.00 313.00 89

63 10 *727 991 971 379.00 347.00 318.00 100

75 10 *727 991 972 395.00 362.00 332.00 110

90 10 *727 991 973 398.00 365.00 335.00 116

110 10 *727 991 974 402.00 369.00 338.00 129

160 10 *727 991 975 413.00 379.00 347.00 157

200 10 *727 991 976 521.00 477.00 438.00 185

225 10 *727 991 977 521.00 477.00 438.00 185

250 10 *727 991 978 549.00 504.00 462.00 212

315 10 *727 991 979 634.00 581.00 532.00 237

L

40

40

L

1.27



PROG

EF

Stan

dard

PPTransition Fittings (A)

Male AdapterWith butt fusion spigot and NPT male thread

Connection to plastic thread only


dmm

NPTinch


SP Lmm

L1mm

smm

20 ½ 10 727 914 656 10.50 1.9 10 51 23 32

25 ¾ 10 727 914 657 12.50 2.3 10 52 23 36

32 1 10 727 914 658 15.50 3.0 10 55 23 46

40 1¼ 10 727 914 659 19.00 3.7 10 58 24 55

50 1½ 10 727 914 660 31.00 4.6 10 60 23 65

63 2 10 727 914 661 39.00 5.8 5 67 26 80

Female AdapterWith butt fusion spigot and NPT female thread, reinforced

Connection to plastic or metal thread only

Stainless steel reinforcing ring


dmm

NPTinch


SP Lmm

L1mm

smm

20 ½ 10 727 914 356 13.20 1.9 10 49 23 32

25 ¾ 10 727 914 357 15.50 2.3 10 51 23 36

32 1 10 727 914 358 19.50 3.0 10 54 23 46

40 1¼ 10 727 914 359 22.00 3.7 10 56 23 55

50 1½ 10 727 914 360 35.00 4.6 10 50 23 65

63 2 10 727 914 361 40.00 5.8 5 62 23 80

e

NP

T

L

d

s

1.28



Transition Fittings

Flare Tube Adapter (A)For transition between PP-H pipe and SYGEF® Plus Flexible Tubing


dmm

Tubeinch


SP Dmm

Lmm

L1mm

L2mm

20 ¼ 10 ^727 991 430 96.00 1.9 1 19 74 43 31

20 3/8 10 ^727 991 431 96.00 1.9 1 22 77 46 31

20 ½ 10 ^727 991 432 96.00 1.9 1 25 79 48 31

20 ¾ 10 ^727 991 433 96.00 1.9 1 34 83 52 31

25 ¼ 10 ^727 991 435 98.00 2.3 1 19 74 43 31

25 3/8 10 ^727 991 436 98.00 2.3 1 22 77 46 31

25 ½ 10 ^727 991 437 98.00 2.3 1 25 79 48 31

25 ¾ 10 ^727 991 438 98.00 2.3 1 34 83 52 31

25 1 10 ^727 991 439 98.00 2.3 1 37 84 58 31

32 ½ 10 ^727 991 442 113.00 3.0 1 25 79 48 31

32 ¾ 10 ^727 991 443 113.00 3.0 1 34 83 52 31

32 1 10 ^727 991 444 113.00 3.0 1 37 89 58 31

SMC "LQ" Flare Tube Adapter (B)For use where SMC LQ Series tube fitting connections are required


dmm

Tubeinch


$Qty 3-6

$Qty 7+

emm

emm

Lmm

20 ¼ 10 *727 992 430 144.00 132.00 121.00 1.9 1 50

20 3/8 10 *727 992 431 144.00 132.00 121.00 1.9 1 50

20 ½ 10 *727 992 432 144.00 132.00 121.00 1.9 1 53

20 ¾ 10 *727 992 433 147.00 135.00 124.00 1.9 1 64

25 ¼ 10 *727 992 435 147.00 135.00 124.00 2.3 1 50

25 3/8 10 *727 992 436 147.00 135.00 124.00 2.3 1 50

25 ½ 10 *727 992 437 147.00 135.00 124.00 2.3 1 53

25 ¾ 10 *727 992 438 150.00 138.00 126.00 2.3 1 64

25 1 10 *727 992 439 150.00 138.00 126.00 2.3 1 72

32 ½ 10 *727 992 442 153.00 140.00 129.00 3.0 1 53

32 ¾ 10 *727 992 443 153.00 140.00 129.00 3.0 1 64

32 1 10 *727 992 444 153.00 140.00 129.00 3.0 1 72

d

L

Tube

e

1.29



PROG

EF

Stan

dard

PP

Dd1 A

LL1

Fd

e

d

e

A DF

LL1

25 mm–63mm

**20 mm only

Transition Fittings

Sanitary Adapter (A)Compatible with 3A ASME BPE Standards

Supplied with: Stainless Steel Backing Ring

*Model without chamfer and stainless reinforcement


d mm Tube(3A)


SP D mm

d1mm

Amm

Fmm

L mm

L1mm

**20 ¾ 10 157 300 016 71.00 1.9 1 25 — — — 49 —

25 1 10 157 598 707 170.00 2.3 1 50 28 44 22 50 2.6

32 1½ 10 157 598 708 137.00 3.0 1 50 35 44 35 52 2.6

40 1½ 10 157 598 709 141.00 3.7 1 50 43 44 35 54 2.6

50 2 10 157 598 710 142.00 4.6 1 64 53 57 48 61 2.6

63 2½ 10 157 598 711 166.00 5.8 1 77 66 71 60 67 2.6

** Does not use sanitary backing ring

Large Sanitary Adapter (B)


d mm Tube(3A)


$Qty 3-6

$Qty 7+

emm

SP Dmm

Lmm

**75 3 6 *727 598 370 209.00 192.00 176.00 6.9 1 91 67

**90 3 6 *727 598 371 231.00 212.00 194.00 8.2 1 91 76

**110 4 6 *727 598 372 295.00 270.00 248.00 10.0 1 119 76

**Does not use a sanitary backing ring

Dd1 A

LL1

Fd

e

d

e

A DF

LL1

D d

e

L

D d

e

L

90-110mm

75mm

1.30



Transition Fittings (B)

Sanitary Blank For use as a blanking cap in a sanitary system

Tube (3A)


$Qty 3-6

$Qty 7+

SP D d L

**¾ 10 *727 992 390 86.00 79.00 72.00 1 25 20 13

1 & 1½ 10 *727 992 391 111.00 102.00 93.00 1 51 32 19

2 10 *727 992 392 116.00 106.00 97.00 1 64 50 19

2½ 10 *727 992 393 131.00 120.00 110.00 1 78 63 19

**3 10 *727 992 394 269.00 247.00 226.00 1 91 75 19

**4 10 *727 992 395 285.00 261.00 239.00 1 117 103 25


Sanitary Instrument Adapter For use when a threaded connection is required in a sanitary system

Tube(3A)

NPTinch


$Qty 3-6

$Qty 7+

SP Dmm

dmm

Lmm

**¾ ¼” 10 *727 992 400 106.00 97.00 89.00 1 25 20 13

1 ¼” 10 *727 992 401 131.00 120.00 110.00 1 51 40 19

1 3/8” 10 *727 992 402 131.00 120.00 110.00 1 51 40 19

1½ ¼” 10 *727 992 403 131.00 120.00 110.00 1 51 40 19

1½ ½” 10 *727 992 404 131.00 120.00 110.00 1 51 40 19

1½ ¾” 10 *727 992 405 131.00 120.00 110.00 1 51 40 19

2 ¼” 10 *727 992 406 136.00 125.00 114.00 1 64 50 19

2 ½” 10 *727 992 407 136.00 125.00 114.00 1 64 50 19

2 ¾” 10 *727 992 408 136.00 125.00 114.00 1 64 50 19

2 1” 10 *727 992 409 136.00 125.00 114.00 1 64 50 19

2½ ¼” 10 *727 992 420 151.00 138.00 127.00 1 78 63 19

2½ ½” 10 *727 992 421 151.00 138.00 127.00 1 78 63 19

2½ ¾” 10 *727 992 422 151.00 138.00 127.00 1 78 63 19

2½ 1” 10 *727 992 423 151.00 138.00 127.00 1 78 63 19

**3 ¼” 10 *727 992 424 289.00 265.00 243.00 1 91 75 19

**3 ½” 10 *727 992 425 289.00 265.00 243.00 1 91 75 19

**3 ¾” 10 *727 992 426 289.00 265.00 243.00 1 91 75 19

**3 1” 10 *727 992 427 289.00 265.00 243.00 1 91 75 19

**4 ¼” 10 *727 992 428 305.00 280.00 256.00 1 117 103 25

**4 ½” 10 *727 992 429 305.00 280.00 256.00 1 117 103 25

**4 ¾” 10 *727 992 420 305.00 280.00 256.00 1 117 103 25

**4 1” 10 *727 992 421 305.00 280.00 256.00 1 117 103 25


dD

L

D

L

d

FNPT

1.31



PROG

EF

Stan

dard

PPTransition Fittings (A)

Hose ConnectorWith butt fusion spigot and parallel hose connection

d mm d1 Hose ID

PN Part Number $ e

mm

SP lbs

/each

L

mm

L1

mm

20 ¾" 10 *727 968 606 7.00 1.9 10 0.018 64 27

25 1" 10 *727 968 607 9.00 2.3 10 0.026 75 36

32 1¼" 10 *727 968 608 11.00 3.0 10 0.049 82 36

40 1½" 10 *727 968 609 16.00 3.7 10 0.066 84 42

50 2" 10 *727 968 610 27.00 4.6 10 0.132 90 48

63 2½" 10 *727 968 611 31.00 5.8 5 0.209 100 50

End Cap


dmm


SP lbs/each

Lmm

L1mm

20 10 727 968 931 10.00 1.9 10 0.01 42 30

25 10 727 968 932 12.20 2.3 10 0.02 50 35

32 10 727 968 933 15.40 3.0 10 0.03 55 40

40 10 727 968 934 19.10 3.7 8 0.06 65 45

50 10 727 968 935 25.00 4.6 8 0.10 70 50

63 10 727 968 936 32.60 5.8 5 0.18 80 55

75 10 727 968 937 51.00 6.9 1 0.28 90 60

90 10 727 968 938 77.00 8.2 1 0.47 105 70

110 10 727 968 939 94.00 10.0 1 0.82 120 80

GF recommends the use of a Blind Flange for sizes above 110 mm.

d

eL

L1

1.32



Inline Valve Ports (B)

Vent Port AssemblyFor use as a system high-point to vent trapped air. Supplied with ½" valve and PVC plug.


dmm


$Qty 3-6

$Qty 7+

emm

SP Lmm

L1mm

50 10 *727 992 600 406.00 373.00 341.00 4.6 1 140 183

63 10 *727 992 601 417.00 383.00 351.00 5.8 1 140 189

75 10 *727 992 602 425.00 389.00 357.00 6.9 1 140 194

90 10 *727 992 603 457.00 419.00 384.00 8.2 1 140 201

110 10 *727 992 604 468.00 429.00 393.00 10.0 1 140 210

160 10 *727 992 605 705.00 647.00 593.00 14.6 1 140 235

200 10 *727 992 606 786.00 721.00 661.00 18.2 1 140 254

225 10 *727 992 607 841.00 721.00 707.00 20.5 1 140 266

250 10 *727 992 608 886.00 812.00 744.00 22.8 1 301 278

315 10 *727 992 609 949.00 870.00 797.00 28.7 1 301 308

Drain Port AssemblyFor use as a system low-point to drain. Supplied with 1" valve and PVC plug.


d PN Part Number $Qty 1-2

$Qty 3-6

$Qty 7+

emm

SP Lmm

L1mm

50 10 *727 992 610 485.00 445.00 408.00 4.6 1 140 215

63 10 *727 992 611 496.00 455.00 417.00 5.8 1 140 221

75 10 *727 992 612 504.00 462.00 423.00 6.9 1 140 227

90 10 *727 992 613 536.00 492.00 451.00 8.2 1 140 233

110 10 *727 992 614 547.00 502.00 460.00 10.0 1 140 242

160 10 *727 992 615 785.00 719.00 659.00 14.6 1 140 268

200 10 *727 992 616 865.00 793.00 727.00 18.2 1 140 287

225 10 *727 992 617 920.00 843.00 773.00 20.5 1 410 294

250 10 *727 992 618 965.00 884.00 811.00 22.8 1 301 310

315 10 *727 992 619 1,028.00 942.00 864.00 28.7 1 301 340

L1

L

1/2”FNPT

L1

L

1”FNPT

1.33



PROG

EF

Stan

dard

PPThreaded Component (B)

Nipple For use ajoining two threaded parts or as an interconnect between

different materials

NPT inch

L inch PN Part Number $Qty 1-2

$Qty 3-6

$Qty 7+

SP

½ 2 10 *727 992 350 114.00 105.00 96.00 1

½ 3 10 *727 992 351 114.00 105.00 96.00 1

½ 4 10 *727 992 352 114.00 105.00 96.00 1

¾ 2 10 *727 992 353 114.00 105.00 96.00 1

¾ 3 10 *727 992 354 114.00 105.00 96.00 1

¾ 4 10 *727 992 355 117.00 107.00 98.00 1

1 2 10 *727 992 356 117.00 107.00 98.00 1

1 3 10 *727 992 357 118.00 108.00 99.00 1

1 4 10 *727 992 358 120.00 110.00 101.00 1

1¼ 3 10 *727 992 359 121.00 111.00 102.00 1

1¼ 4 10 *727 992 360 122.00 112.00 103.00 1

1½ 3 10 *727 992 361 121.00 111.00 102.00 1

1½ 4 10 *727 992 362 122.00 112.00 103.00 1

2 3 10 *727 992 363 125.00 115.00 105.00 1

2 4 10 *727 992 364 126.00 116.00 106.00 1

NPT

L

1.34



Socket Fusion Fittings (A)

90° Elbowdmm

PN Part Number $ SP lbs/each

Dmm

Lmm

zmm

16 10 *727 100 105 5.00 10 0.03 26 25 12

20 10 727 100 106 5.40 10 0.04 31 28 14

25 10 727 100 107 6.00 10 0.06 36 32 16

32 10 727 100 108 7.00 10 0.11 44 38 20

40 10 727 100 109 9.00 10 0.17 54 44 24

50 10 727 100 110 14.00 10 0.26 66 51 28

63 10 727 100 111 17.50 1 0.53 892 62 35

75 10 727 100 112 38.00 1 0.66 93 76 45

90 10 727 100 113 52.00 1 0.97 110 88 53

110 10 727 100 114 69.00 1 1.76 134 106 65

90° Elbow British Standard Pipe ThreadWith fusion socket and BSP parallel female thread, reinforced.

Connection to plastic or metal thread.

dmm

BSP PN Part Number $ SP lbs/each

Dmm

Lmm

z1mm

z2mm

20 ½ 10 *727 100 206 9.50 10 0.05 30 28 14 14

25 ¾ 10 *727 100 207 11.00 10 0.07 35 32 16 16

32 1 10 *727 100 208 14.00 10 0.13 44 38 20 20

40 1¼ 10 *727 100 209 20.00 10 0.22 54 44 24 24

1.35



PROG

EF

Stan

dard

PPSocket Fusion Fittings (A)

45° Elbowdmm


Dmm

Lmm

zmm

16 10 *727 150 105 7.00 10 0.02 23 20 7

20 10 727 150 106 7.00 10 0.04 31 21 7

25 10 727 150 107 8.00 10 0.06 36 24 8

32 10 727 150 108 9.00 10 0.09 44 28 10

40 10 727 150 109 11.00 5 0.14 53 33 13

50 10 727 150 110 15.00 5 0.2 64 36 13

63 10 727 150 111 19.00 1 0.32 82 43 16

75 10 727 150 112 39.00 1 0.46 93 51 20

90 10 727 150 113 52.00 1 0.97 114 58 23

110 10 727 150 114 72.00 1 1.28 134 68 27

Teedmm


Dmm

Lmm

zmm

16 10 *727 200 105 6.00 10 0.04 26 25 12

20 10 727 200 106 6.00 10 0.06 31 28 14

25 10 727 200 107 6.50 10 0.08 36 32 16

32 10 727 200 108 7.50 10 0.15 44 38 20

40 10 727 200 109 9.00 10 0.23 54 44 24

50 10 727 200 110 16.00 10 0.32 66 51 28

63 10 727 200 111 23.00 1 0.70 82 62 35

75 10 727 200 112 51.00 1 0.84 93 76 45

90 10 727 200 113 83.00 1 1.65 114 88 53

110 10 727 200 114 105.00 1 2.54 134 106 65

Tee British Standard Pipe Threaded BranchWith fusion sockets on run and BSP parallel female thread reinforced on branch.


dmm

BSP PN Part Number $ SP lbs/each

Dmm

Lmm

z1mm

z2mm

20 ½ 10 *727 200 206 14.00 10 0.07 31 28 14 14

25 ¾ 10 *727 200 207 17.00 10 0.09 36 32 16 16

32 1 10 *727 200 208 17.00 10 0.17 44 38 20 20

40 1¼ 10 *727 200 209 24.00 10 0.27 54 44 24 24

1.36




Reducer BushingWith fusion spigot and socket

dmm

d1mm


Lmm

zmm

20 16 10 *727 910 334 4.00 10 0.02 35 22

25 16 10 *727 910 338 5.00 10 0.02 38 25

25 20 10 727 910 337 5.00 10 0.03 37 23

32 20 10 727 910 342 6.00 10 0.04 43 29

32 25 10 727 910 341 6.00 10 0.05 43 27

40 20 10 727 910 348 7.00 10 0.05 48 34

40 25 10 727 910 347 7.00 10 0.06 48 32

40 32 10 727 910 346 7.00 10 0.08 48 30

50 20 10 727 910 355 9.00 10 0.08 54 40

50 25 10 727 910 354 9.00 10 0.08 54 38

50 32 10 727 910 353 9.00 10 0.09 54 36

50 40 10 727 910 352 9.00 10 0.11 54 34

63 25 10 727 910 361 11.00 5 0.13 64 48

63 32 10 727 910 360 11.00 10 0.15 64 46

63 40 10 727 910 359 11.00 5 0.16 64 44

63 50 10 727 910 358 11.00 5 0.17 64 41

75 63 10 727 910 364 18.00 1 0.24 62 35

90 63 10 727 910 371 26.00 1 0.2 88 61

90 75 10 727 910 370 26.00 1 0.29 70 39

110 90 10 727 910 376 35.00 1 0.58 81 46

Couplingdmm


Dmm

Lmm

zmm

16 10 *727 910 105 3.20 10 0.02 26 33 7

20 10 727 910 106 3.40 10 0.03 31 35 7

25 10 727 910 107 3.60 10 0.04 36 39 7

32 10 727 910 108 4.80 10 0.07 44 43 7

40 10 727 910 109 6.00 10 0.11 54 48 8

50 10 727 910 110 10.50 5 0.15 66 54 8

63 10 727 910 111 15.50 5 0.27 82 62 8

75 10 727 910 112 22.00 1 0.33 93 70 8

90 10 727 910 113 31.00 1 0.56 112 81 11

110 10 727 910 114 50.00 1 0.96 134 96 14

dd1

z

L

d

d1

zL

Shaded

Non-Shaded

1.37



PROG

EF

Stan

dard


Flange Adapter - ANSI Serrated Facedmm


Dmm

D1mm

Lmm

L1mm

zmm

20 10 727 790 206 4.20 10 0.02 27 45 19 7 5

25 10 727 790 257 13.00 10 0.04 33 54 21 7 5

32 10 727 790 258 13.00 10 0.06 41 63 23 7 5

40 10 727 790 259 15.50 10 0.09 50 73 25 8 5

50 10 727 790 260 15.50 5 0.12 61 82 28 8 5

63 10 727 790 211 16.00 5 0.2 76 102 32 14 5

75 10 727 790 212 17.50 1 0.36 90 122 36 16 5

90 10 727 790 263 29.00 1 0.57 108 133 36 16 5

110 10 727 790 214 41.00 1 0.7 131 158 48 18 7

End Capdmm


Lmm

16 10 *727 960 105 5.00 10 25 20

20 10 727 960 106 5.00 10 30 27

25 10 727 960 107 5.50 10 36 30

32 10 727 960 108 6.00 10 44 34

40 10 727 960 109 7.00 10 53 38

50 10 727 960 110 10.00 10 65 44

63 10 727 960 111 14.00 5 80 51

75 10 727 960 112 23.00 1 91 65

90 10 727 960 113 29.00 1 111 77

110 10 727 960 114 38.00 1 137 93

D

L

L1

D1

z

d

1.38




Union75, 90, and 110 dimensions utilize buttress thread

Supplied with: EPDM O-Ring

d mm PN EPDM $ SP lbs/each

Dmm

L1mm

L2mm

zmm

z1mm

16 10 *727 510 155 22.50 10 0.04 35 18 24 5 11

20 10 727 510 156 23.50 10 0.08 48 19 26 5 12

25 10 727 510 157 25.00 10 0.12 58 21 28 5 12

32 10 727 510 158 31.00 10 0.15 65 23 30 5 12

40 10 727 510 159 41.00 10 0.25 79 25 34 5 14

50 10 727 510 160 58.00 10 0.34 91 28 39 5 16

63 10 727 510 161 82.00 1 0.66 111 32 47 5 20

75 10 *727 510 172 125.00 1 0.99 135 36 51 5 20

90 10 *727 510 173 165.00 1 1.42 158 42 55 7 20

110 10 *727 510 174 220.00 1 2.25 188 49 54 7 12

Supplied with: FPM O-Ring

d mm PN EPDM $ SP lbs/each

Dmm

L1mm

L2mm

zmm

z1mm

16 10 *727 520 155 26.00 10 0.04 35 18 24 5 11

20 10 *727 520 156 28.00 10 0.08 48 19 26 5 12

25 10 *727 520 157 31.00 10 0.12 58 21 28 5 12

32 10 *727 520 158 37.00 10 0.15 65 23 30 5 12

40 10 *727 520 159 51.00 10 0.25 79 25 34 5 14

50 10 *727 520 160 67.00 10 0.34 91 28 39 5 16

63 10 *727 520 161 95.00 1 0.66 111 32 47 5 20

75 10 *727 520 172 143.00 1 0.99 135 36 51 5 20

90 10 *727 520 173 188.00 1 1.42 158 42 55 7 20

110 10 *727 520 174 253.00 1 2.25 188 49 54 7 12

Metric-To-Inch Adapter Union (Metric Socket x Inch Socket)Supplied with: EPDM O-Ring

dmm

d2inch

PN EPDM $ SP lbs/each

Dmm

L1mm

L2mm

z1mm

z2mm

20 ½ 10 *727 513 006 36.00 10 0.08 48 19 26 5 12

25 ¾ 10 *727 513 007 38.00 10 0.13 58 21 28 5 12

32 1 10 *727 513 008 47.00 10 0.17 65 23 30 5 12

40 1¼ 10 *727 513 009 56.00 10 0.25 79 25 34 5 14

50 1½ 10 *727 513 010 90.00 10 0.4 91 28 39 5 16

63 2 10 *727 513 011 121.00 1 0.69 111 32 47 5 20

1.39


PROG

EF

Stan

dard


Union EndSuitable for unions and diaphragm valves Type 314

dmm


Dmm

D1mm

Lmm

L1mm

zmm

16 10 *727 600 105 2.60 10 0.04 24 22 18 4 5

20 10 *727 600 106 2.80 10 0.08 30 28 19 5 5

25 10 *727 600 107 3.20 10 0.12 39 36 21 5 5

32 10 *727 600 108 3.50 10 0.15 45 42 23 6 5

40 10 *727 600 109 4.60 10 0.25 57 53 25 6 5

50 10 *727 600 110 5.60 10 0.34 63 59 28 7 5

63 10 *727 600 111 5.90 1 0.66 79 74 32 8 5

75 10 *727 600 112 26.00 1 0.99 101 91 36 10 5

90 10 *727 600 113 33.00 1 1.42 121 108 42 11 7

110 10 *727 600 114 41.00 1 2.25 146 131 49 12 7

Union BushingJoining face with O-ring groove

dmm


Lmm

zmm

G (Thread)inch

16 10 *727 640 155 8.00 10 0.04 24 11 ¾

20 10 *727 640 156 9.00 10 0.08 26 12 1

25 10 *727 640 157 9.60 10 0.12 28 12 1¼

32 10 *727 640 158 11.50 10 0.15 30 12 1½

40 10 *727 640 159 16.00 10 0.25 34 14 2

50 10 *727 640 160 22.00 10 0.34 39 16 2¼

63 10 *727 640 161 29.00 1 0.66 47 20 2¾

75 10 *727 640 172 50.00 1 0.99 51 18 S107.5x3.6

90 10 *727 640 173 67.00 1 1.42 55 18 S127.5x3.6

110 10 *727 640 174 89.00 1 2.25 54 22 S152.5x3.6

Union NutPP glass-fiber reinforced

Used with Socket and IR Unions

d mm PN Part Number $ SP lbs/each

Dmm

Lmm

G (Thread)inch

16 10 *727 690 405 10.00 10 0.04 35 21 ¾

20 10 *727 690 406 11.30 10 0.08 48 24 1

25 10 *727 690 407 11.50 10 0.12 58 26 1¼

32 10 *727 690 408 14.00 10 0.15 65 28 1½

40 10 *727 690 409 19.00 10 0.25 79 31 2

50 10 *727 690 410 28.50 10 0.34 91 35 2¼

63 10 *727 690 411 46.00 1 0.66 111 39 2¾

75 10 *727 690 422 58.00 1 0.99 135 40 S107.5x3.6

90 10 *727 690 423 69.00 1 1.42 158 43 S127.5x3.6

110 10 *727 690 424 90.00 1 2.25 188 48 S152.5x3.6

DG

L

1.40



Pipe Thread


Male Threaded AdapterWith fusion spigot and NPT male thread.

Connection to plastic or metal thread only.

NPTinch

dmm


smm

zmm

xmm

3/8 16 10 *727 914 555 9.50 10 0.02 27 37 13

½ 20 10 727 914 556 9.50 10 0.04 32 42 13

¾ 25 10 727 914 557 11.00 10 0.06 36 46 13

1 32 10 727 914 558 15.00 10 0.09 46 52 12

1¼ 40 10 727 914 559 33.00 10 0.14 55 56 14

1½ 50 10 727 914 560 36.00 10 0.22 65 60 15

2 63 10 727 914 561 49.00 5 0.41 80 69 16

Female Threaded AdapterWith fusion socket and NPT female thread, reinforced.


NPTinch

dmm


lmm

smm

zmm

½ 20 10 727 914 266 8.20 10 0.04 40 32 7

¾ 25 10 727 914 267 11.00 10 0.05 42 36 7

1 32 10 727 914 268 13.50 10 0.09 48 46 7

1¼ 40 10 727 914 269 16.50 10 0.14 53 55 7

1½ 50 10 727 914 270 22.00 10 0.2 54 65 9

2 63 10 727 914 271 29.00 5 0.32 62 80 9

s = width of hex

x

1.41



PROG

EF

Stan

dard

PP

d


Barrel Nippledmm


Lmm

20 10 *727 910 906 4.80 10 0.01 37

25 10 *727 910 907 5.00 10 0.02 41

32 10 *727 910 908 6.50 10 0.02 45

40 10 *727 910 909 10.00 10 0.04 50

50 10 *727 910 910 11.50 10 0.07 55

63 10 *727 910 911 18.00 5 0.13 64

75 10 *727 910 912 23.00 2 0.23 76

90 10 *727 910 913 26.00 2 0.33 90

110 10 *727 910 914 35.00 2 0.57 108

Hose ConnectorWith socket fusion spigot and parallel hose connection

dmm

d1Hose ID


Lmm

L1mm

20 ¾ 10 *727 960 406 7.50 10 0.02 78 27

25 1 10 *727 960 407 9.50 10 0.03 91 36

32 1¼ 10 *727 960 408 11.00 10 0.06 100 36

40 1½ 10 *727 960 409 19.00 10 0.09 104 42

50 2 10 *727 960 410 30.00 10 0.13 90 48

63 ½ 10 *727 960 411 33.00 5 0.21 100 50

1.42



Diaphragm Valve - Type 315

Technical Features

• Diaphragm valves are especially suitable for flow

control applications. Also suitable for slurries and abrasive media.

• “Snap-on” handwheel - easy to remove

• Option: lockable handle

• Position indicator, improved robustness

• Can also be used in vacuum applications

General

The Type 315 diaphragm valve is available in EPDM and PTFE seal configurations with IR/butt fusion ends and standard

overall lengths in accordance with DIN 3202. Features include flow in either direction regardless of installation position

and bracketing incorporated in the valve body. Also available pneumatically actuated, see GF DIASTAR (information

available).

IR Plus® Fusion - Dimensions:

d inch PN Cv-valve gal/min (p= Δ1 psi)

D2 H H1 H2 Hx L L2 M

20 ½ 10 5.04 80 90 14 12 8 124 25 M6

25 ¾ 10 9.59 80 102 18 12 11 144 25 M6

32 1 10 14.50 94 119 21 12 13 154 25 M6

40 1¼ 10 24.79 117 126 26 15 16 174 45 M8

50 1½ 10 36.20 117 139 33 15 21 194 45 M8

63 2 10 49.93 152 172 39 15 28 224 45 M8

1.43


PROG

EF

Stan

dard

PPDiaphragm Valve - Type 315 (A)

Model

Ergonomic, easily removable handwheel

Option: lockable handle

Additional diaphragm materials available: (NBR-nitrile; CSM-Hypalon)

Socket Fusion

d mm PN EPDM $ PTFE $ Closest inch size

20 10 167 315 417 79.00 167 315 432 162.00 ½25 10 167 315 418 88.00 167 315 433 170.00 ¾32 10 167 315 419 111.00 167 315 434 204.00 1

40 10 167 315 420 133.00 167 315 435 260.00 11/4

50 10 167 315 421 172.00 167 315 436 328.00 11/2

63 10 167 315 422 217.00 167 315 437 410.00 2

IR Plus® Fusion


20 10 167 315 517 95.00 167 315 532 182.00 ½25 10 167 315 518 106.00 167 315 533 205.00 ¾32 10 167 315 519 133.00 167 315 534 246.00 1

40 10 167 315 520 160.00 167 315 535 314.00 11/4

50 10 167 315 521 207.00 167 315 536 390.00 11/2

63 10 167 315 522 260.00 167 315 537 490.00 2

IR Plus® Fusion - Silicone Free


20 10 *167 315 577 132.00 *167 315 562 227.00 ½25 10 *167 315 578 147.00 *167 315 563 284.00 ¾32 10 *167 315 579 186.00 *167 315 564 341.00 1

40 10 *167 315 580 221.00 *167 315 565 429.00 11/4

50 10 *167 315 581 286.00 *167 315 566 487.00 11/2

63 10 *167 315 582 338.00 *167 315 567 681.00 2

Lockable Handwheel (A)

20 mm 25 mm 32 mm 40 mm 50 mm 63 mm 75 mm

*167 481 943 *167 481 943 *167 481 944 *167 481 945 *167 481 945 *167 481 946 *167 481 946

$31.00 $31.00 $31.50 $33.00 $33.00 $34.00 $34.00

1.44




General

The Type 319 diaphragm valve is available with PTFE Seals and IR Plus® fusion ends have the shortest branch geometry.

Engineered with outstanding internal surface characteristics and compact construction requires the least amount of

space for installation. Bracketing facility incorporated in the valve. Also available pneumatically actuated, see GF DIASTAR

(information available).

IR Plus® Fusion - Dimensions

d-d1 inch PN Cv-valve gal/min (p= Δ1 psi)

D2 H Hx L L1 L2 L3

20 x 20 ½ x ½ 10 3.29 80 87 8 106 96 30 140

25 x 20 ¾ x ½ 10 4.83 80 101 11 121 108 36 150

25 x 25 ¾ x ¾ 10 6.37 80 101 11 121 108 36 150

32 x 20 1 x ½ 10 6.02 94 119 13 137 120 43 160

32 x 25 1 x ¾ 10 8.82 94 119 13 137 120 43 160

32 x 32 1 x 1 10 10.92 94 119 13 137 120 43 160

40 x 20 1¼ x ½ 10 5.88 94 116 12 149 128 51 180

50 x 20 1½ x ½ 10 5.74 94 116 8 159 134 57 180

50 x 25 1½ x ¾ 10 8.68 94 119 13 159 134 57 180

50 x 32 1½ x 1 10 11.13 94 119 13 159 134 57 180

63 x 20 2 x ½ 10 5.67 94 116 13 175 144 67 180

63 x 25 2 x ¾ 10 8.05 94 116 13 175 144 67 180

63 x 32 2 x 1 10 10.92 94 119 13 175 144 67 180

90 x 20 3 x ½ 10 6.16 94 119 13 204 159 82 160

90 x 25 3 x ¾ 10 9.31 94 119 13 204 159 82 160

90 x 32 3 x 1 10 11.34 94 119 13 204 159 82 160

90 x 50 3 x 1½ 10 35.29 152 172 28 252 207 95 220

90 x 63 3 x 2 10 37.11 152 172 28 252 207 95 220

110 x 20 4 x ½ 10 6.23 94 116 13 226 171 94 160

110 x 25 4 x ¾ 10 8.61 94 116 13 226 171 94 160

110 x 32 4 x 1 10 11.13 94 116 13 226 171 94 160

110 x 50 4 x 1½ 10 35.22 152 172 28 274 219 107 220

110 x 63 4 x 2 10 38.03 152 172 28 274 219 107 220

Technical Features

• The Type 319 Zero Static Valve is ideally suited to eliminate

dead legs in ultrapure water systems.

• Ergonomic, “snap-on“ handwheel – easy to remove




1.45



PROG

EF

Stan

dard


Model

Valve body injection molded

Minimized static zone (dead leg)

IR-Plus® compatible

PTFE Diaphragm with EPDM backing

Option: Handwheel with built in locking mechanism

IR Plus® Fusion

d-d1 PN PTFE $ kg Closest inch size

20 x 20 10 167 319 301 480.00 0.329 ½ x ½

25 x 20 10 167 319 303 485.00 0.457 ¾ x ½

25 x 25 10 167 319 304 490.00 0.457 ¾ x ¾

32 x 20 10 167 319 307 495.00 0.619 1 x ½

32 x 25 10 167 319 308 500.00 0.618 1 x ¾

32 x 32 10 167 319 309 504.00 0.618 1 x 1

40 x 20 10 167 319 312 515.00 0.658 1¼ x ½

50 x 20 10 167 319 318 606.00 0.701 1½ x ½

50 x 25 10 167 319 319 655.00 0.701 1½ x ¾

50 x 32 10 167 319 320 680.00 0.700 1½ x 1

63 x 20 10 167 319 325 700.00 0.769 2 x ½

63 x 25 10 167 319 326 710.00 0.771 2 x ¾

63 x 32 10 167 319 327 725.00 0.768 2 x 1

90 x 20 10 167 319 341 810.00 0.871 3 x ½

90 x 25 10 167 319 342 820.00 1.062 3 x ¾

90 x 32 10 167 319 343 840.00 0.907 3 x 1

90 x 50 10 167 319 345 1,030.00 2.285 3 x 1½

90 x 63 10 167 319 346 1,240.00 2.285 3 x 2

110 x 20 10 167 319 351 860.00 0.888 4 x ½

110 x 25 10 167 319 352 890.00 0.887 4 x ¾

110 x 32 10 167 319 353 920.00 0.886 4 x 1

110 x 50 10 167 319 355 1,100.00 2.400 4 x 1½

110 x 63 10 167 319 356 1,400.00 2.426 4 x 2

1.46




Technical Features

• Diaphragm valves are especially suitable for

flow control applications. Also suitable for use with slurries and

abrasive media as well as for flanged requirements in a UPW system.

General

The Type 317 diaphragm valve is available in EPDM and PTFE seal configurations with flanged ends that allow valves to

be connected into pipeline without additional fittings. Features include flow in either direction regardless of installation

position, bracketing incorporated in the valve body allowing and easy replacement of diaphragm without removal of the

body from the pipeline. Also available pneumatically actuated, see GF DIASTAR (information available).

Dimensions


D D1 D2 D3 H H1 H2

20 ½ 10 5.04 95 61 80 14 90 14 12

25 ¾ 10 9.59 105 70 80 14 93 18 12

32 1 10 14.50 115 80 94 14 119 21 12

40 1¼ 10 24.79 140 89 117 18 126 26 15

50 1½ 10 36.20 150 99 117 18 139 33 15

63 2 10 49.93 165 121 152 18 172 39 15

75 2½ 10 69.47 185 145 152 18 210 46 15

90 3 10 119.05 200 152 270 18 265 57 23

110 4 10 189.08 225 191 270 18 302 68 23

160 6 10 422.48 282 241 400 23 437 108 23

Dimensions

d inch Hx L L1 L2 L3 M AL

20 ½ 8 130 - 25 - M6 4

25 ¾ 11 150 - 25 - M6 4

32 1 13 160 - 25 - M6 4

40 1¼ 16 180 - 45 - M8 4

50 1½ 21 200 - 45 - M8 4

63 2 28 230 - 45 - M8 4

75 2½ 35 290 - 70 - M8 4

90 3 40 310 35 120 - M12 8

110 4 50 350 35 120 - M12 8

160 6 70 480 29 100 200 M12 8

3"-6" 90-160 mm

½" - 2" 20-63 mm

1.47



PROG

EF

Stan

dard


Model

ANSI Class 150 Flanges

Easy installation and removal

Option

Handwheel with built-in locking mechanism (standard version is non-lockable)

Flanged

ANSI size inch

PN EPDM $ PTFE $

½ 10 *167 317 242 128.00 *167 317 257 213.00

¾ 10 *167 317 243 131.00 *167 317 258 228.00

1 10 *167 317 244 176.00 *167 317 259 270.00

11/4 10 *167 317 245 204.00 *167 317 260 341.00

11/2 10 *167 317 246 270.00 *167 317 261 428.00

2 10 *167 317 247 343.00 *167 317 262 533.00

21/2 10 ^167 317 523 387.00 ^167 317 538 605.00

3 10 ^167 317 024 574.00 ^167 317 039 845.00

4 10 ^167 317 325 808.00 ^167 317 340 1,125.00

6 10 *167 317 027 2,300.00 *167 317 042 3,424.00

Lockable Handwheel

20 mm 25 mm 32 mm 40 mm 50 mm 63 mm 75 mm

*167 481 943 *167 481 943 *167 481 944 *167 481 945 *167 481 945 *167 481 946 *167 481 946

$31.00 $31.00 $31.50 $33.00 $33.00 $34.00 $34.00

½" - 2"

3"-6"

1.48




Technical Features

• Diaphragm valves are especially suitable for flow control

applications. Also suitable for slurries and abrasive media.

• “Snap-on” handwheel - easy to remove




General

The Type 314 diaphragm valve is available in EPDM and PTFE seal configurations with IR/butt fusion and socket fusion

ends allow valves to be connected into pipeline without additional fittings. Features include flow in either direction

regardless of installation position and bracketing incorporated in the valve body. Also available pneumatically actuated,

see GF DIASTAR (information available).



D2 H H1 H2 Hx L L1 L2 M

20 ½ 10 5.04 80 90 14 12 8 196 90 25 M6

25 ¾ 10 9.59 80 101 18 12 11 220 108 25 M6

32 1 10 14.50 94 117 22 12 13 234 116 25 M6

40 1¼ 10 24.79 117 127 26 15 16 258 134 45 M8

50 1½ 10 36.20 117 139 32 15 21 284 154 45 M8

63 2 10 49.93 152 172 39 15 28 320 184 45 M8

Socket Fusion - Dimensions


D2 H H1 H2 Hx L L1 L2 M

20 ½ 10 5.04 80 90 14 12 8 129 90 25 M6

25 ¾ 10 9.59 80 101 18 12 11 150 108 25 M6

32 1 10 14.50 94 117 22 12 13 162 116 25 M6

40 1¼ 10 24.79 117 127 26 15 16 184 134 45 M8

50 1½ 10 36.20 117 139 32 15 21 210 154 45 M8

63 2 10 49.93 152 172 39 15 28 244 184 45 M8

1.49



PROG

EF

Stan

dard


Ergonomic, easily removable handwheel

Option: lockable handwheel

Radial mounting/dismounting for easy installation and removal

Socket Fusion


20 10 ^167 314 417 105.00 ^167 314 432 216.00 ½25 10 ^167 314 418 113.00 ^167 314 433 219.00 ¾32 10 ^167 314 419 138.00 ^167 314 434 253.00 1

40 10 ^167 314 420 166.00 ^167 314 435 324.00 11/4

50 10 ^167 314 421 216.00 ^167 314 436 411.00 11/2

63 10 ^167 314 422 270.00 ^167 314 437 510.00 2

IR Plus® Fusion


20 10 ^167 314 517 126.00 ^167 314 532 251.00 ½25 10 ^167 314 518 130.00 ^167 314 533 253.00 ¾32 10 ^167 314 519 160.00 ^167 314 534 295.00 1

40 10 ^167 314 520 195.00 ^167 314 535 382.00 11/4

50 10 ^167 314 521 253.00 ^167 314 536 482.00 11/2

63 10 ^167 314 522 316.00 ^167 314 537 600.00 2

Socket Fusion - Silicone Free


20 10 *167 314 477 145.00 *167 314 492 300.00 ½25 10 *167 314 478 157.00 *167 314 493 305.00 ¾32 10 *167 314 479 191.00 *167 314 494 350.00 1

40 10 *167 314 480 230.00 *167 314 495 450.00 11/4

50 10 *167 314 481 300.00 *167 314 496 570.00 11/2

63 10 *167 314 482 375.00 *167 314 497 710.00 2

IR Plus® Fusion - Silicone Free

d mm

PN EPDM $ PTFE $ Closest inch size

20 10 *167 314 577 174.00 *167 314 592 338.00 ½25 10 *167 314 578 181.00 *167 314 593 350.00 ¾32 10 *167 314 579 221.00 *167 314 594 390.00 1

40 10 *167 314 580 270.00 *167 314 595 416.00 11/4

50 10 *167 314 581 350.00 *167 314 596 650.00 11/2

63 10 *167 314 582 440.00 *167 314 597 800.00 2

1.50

General

The Type 546 ball valve available in EPDM and PTFE seal configurations with union ends allow valves to be connected into

pipeline without additional fittings. Flow in either direction regarless of installation position. Bracketing facility incorporated in

the valve. Also available pneumatically and electrically actuated, see "Valve and Actuation" price list (information available).

(Flanged Ends)

Ball Valve - Type 546

IR Fusion Ends

Socket/NPT Ends

Technical Features

• Corrosion resistance

• Ideal flow characteristics

• Shorter installation length enables more compact systems

• Integrated fastening system for direct mounting

• Fully serviceable valve with an ergonomic handle and built in

seat removal

• EPDM and FPM Seals available

Flanged Ends


d PN Cv-valve gal/min (p= Δ1 psi)

D H H1 H2 L L1 L2 L4 L5 L6 M

20 10 12.96 50 57 27 12 120 77 56 25 32 45 M625 10 24.51 58 67 30 12 139 97 65 25 39 58 M632 10 49.02 68 73 36 12 150 97 71 25 39 58 M640 10 70.03 84 90 44 15 170 128 85 45 54 74 M850 10 112.04 97 97 51 15 190 128 89 45 54 74 M863 10 217.09 124 116 64 15 220 152 101 45 66 87 M8



D H H1 H2 L L1 L2 L4 L5 L6 M

16 10 4.97 50 57 27 12 93 77 56 25 32 45 M620 10 12.96 50 57 27 12 95 77 56 25 32 45 M625 10 24.51 58 67 30 12 109 97 65 25 39 58 M632 10 49.02 68 73 36 12 119 97 71 25 39 58 M640 10 70.03 84 90 44 15 135 128 85 45 54 74 M850 10 112.04 97 97 51 15 147 128 89 45 54 74 M863 10 217.09 124 116 64 15 168 152 101 45 66 87 M8

NPT - Dimensions


D H H1 H2 L L1 L2 L4 L5 L6 M

3/8 10 4.97 50 57 27 12 96 77 56 25 32 45 M6½ 10 12.96 50 57 27 12 99 77 56 25 32 45 M6¾ 10 24.51 58 67 30 12 111 97 65 25 39 58 M61 10 49.02 68 73 36 12 127 97 71 25 39 58 M61¼ 10 70.03 84 90 44 15 146 128 85 45 54 74 M81½ 10 112.04 97 97 51 15 157 128 89 45 54 74 M82 10 217.09 124 116 64 15 183 152 101 45 66 87 M8

Flanged - Dimensions


D H H1 H2 L L1 L2 L4 L5 L6 M

½ 10 12.96 93 57 27 12 120 77 56 25 32 45 M6¾ 10 24.51 103 67 30 12 139 97 65 25 39 58 M61 10 49.02 115 73 36 12 150 97 71 25 39 58 M61¼ 10 70.03 137 90 44 15 170 128 85 45 54 74 M81½ 10 112.04 147 97 51 15 190 128 89 45 54 74 M82 10 217.09 162 116 64 15 220 152 101 45 66 87 M8

IR/Socket/NPT/Flanged

1.51



PROG

EF

Stan

dard

PPBall Valve - Type 546 (A)

Socket Fusion

Size mm EPDM $ FPM $

16 *167 546 401 46.00 *167 546 411 56.00

20 167 546 402 48.00 167 546 412 58.00

25 167 546 403 57.00 167 546 413 68.00

32 167 546 404 78.00 167 546 414 85.00

40 167 546 405 87.00 167 546 415 106.00

50 167 546 406 114.00 167 546 416 140.00

63 167 546 407 140.00 167 546 417 179.00

IR Plus® Fusion

Size mm EPDM $ FPM $

20 167 546 442 51.00 167 546 452 61.00

25 167 546 443 60.00 167 546 453 71.00

32 167 546 444 75.00 167 546 454 90.00

40 167 546 445 92.00 167 546 455 110.00

50 167 546 446 120.00 167 546 456 146.00

63 167 546 447 145.00 167 546 457 183.00

Female NPT

Size Inch EPDM $ FPM $3/8 *167 546 321 63.00 *167 546 331 73.00

½ 167 546 322 65.00 167 546 332 76.00

¾ 167 546 323 76.00 167 546 333 86.00

1 167 546 324 91.00 167 546 334 109.00

11/4 167 546 325 117.00 167 546 335 134.00

11/2 167 546 326 146.00 167 546 336 173.00

2 167 546 327 177.00 167 546 337 215.00

ANSI Flanged

Size Inch EPDM $ FPM $

½ *167 546 582 99.00 *167 546 592 110.00

¾ *167 546 583 107.00 *167 546 593 125.00

1 *167 546 584 130.00 *167 546 594 150.00

1¼ *167 546 585 180.00 *167 546 595 190.00

1½ *167 546 586 200.00 *167 546 596 225.00

2 *167 546 587 250.00 *167 546 597 270.00

1.52



Ball Valve - Type 546 (A)

Socket Fusion with PTFE seats - Silicone Free

Size mm EPDM Seals $ FPM Seals $

16 *800 000 720 57.00 *800 000 727 70.00

20 *800 000 721 59.00 *800 000 728 73.00

25 *800 000 722 71.00 *800 000 729 84.00

32 *800 000 723 87.00 *800 000 730 107.00

40 *800 000 724 123.00 *800 000 731 132.00

50 *800 000 725 135.00 *800 000 732 169.00

63 *800 000 726 173.00 *800 000 733 227.00

IR Plus® Fusion with PTFE seats - Silicone Free

Size mm EPDM Seals $ FPM Seals $

20 *800 000 734 67.00 *800 000 740 81.00

25 *800 000 735 83.00 *800 000 741 97.00

32 *800 000 736 100.00 *800 000 742 120.00

40 *800 000 737 136.00 *800 000 743 145.00

50 *800 000 738 152.00 *800 000 744 185.00

63 *800 000 739 188.00 *800 000 745 240.00

1.53

PROG

EF

Stan

dard

PP3-Way Ball Valve - Type 343 L-Port/T-Port

Technical Features



• Light weight


• Long working life, maintenance-free

• EPDM and FPM Seals available

General

The Type 343 3-way ball valve available with EPDM and FPM seal configurations with IR/butt fusion and socket fusion union

ends allow valves to be connected into pipeline without additional fittings. L-port 3-way valves are the perfect solution when

liquid diversion is required. T-port 3-wWay valves are the perfect solution when liquid mixing is required. Features include

bracketing incorporated in the valve body. Also available pneumatically and electrically actuated, see "Valve and Actuation"

price list (information available).



D H H1 H2 L L1 L2 L4 L5 L6 M

16 10 3.43 46 50 27 8 119 78 70 25 36 60 M6

20 10 5.39 46 50 27 8 140 78 70 25 36 70 M6

25 10 10.22 56 60 33 8 156 92 86 25 43 78 M6

32 10 18.21 67 68 36 8 168 100 96 25 48 84 M6

40 10 30.60 82 79 44 9 198 110 114 45 58 99 M8

50 10 46.71 98 90 49 9 233 120 137 45 69 117 M8

63 10 90.55 121 109 61 9 285 146 179 45 90 143 M8



z z1 D H H1 H2 L L1 L2 L4 L5 M

16 10 3.43 78 39 46 50 27 8 108 78 70 25 36 M6

20 10 5.39 79 40 46 50 27 8 111 78 70 25 36 M6

25 10 10.22 95 48 56 60 33 8 131 92 86 25 43 M6

32 10 18.21 108 54 67 68 36 8 148 100 96 25 48 M6

40 10 30.60 133 67 82 79 44 9 177 110 114 45 58 M8

50 10 46.71 155 78 98 90 49 9 205 120 137 45 69 M8

63 10 90.55 203 102 121 109 61 9 261 146 179 45 90 M8

NPT - Dimensions


z z1 D H H1 H2 L L1 L2 L4 L5 M

3/8 10 3.43 76 38 46 50 27 8 108 78 70 25 36 M6

½ 10 5.39 76 38 46 50 27 8 111 78 70 25 36 M6

¾ 10 10.22 90 45 56 60 33 8 131 92 86 25 43 M6

1 10 18.21 100 50 67 68 36 8 148 100 96 25 48 M6

1¼ 10 30.60 122 61 82 79 44 9 177 110 114 45 58 M8

1½ 10 46.71 152 76 98 90 49 9 205 120 137 45 69 M8

2 10 90.55 200 100 116 109 61 9 261 146 179 45 90 M8

1.54



III

II

I

3-Way Ball Valve - Type 343 L-Port/T-Port (A)

Socket Fusion, L-Port

d mm EPDM $ FPM $ Inch size

16 *167 343 001 113.00 *167 343 011 137.00 3/8

20 ^167 343 002 116.00 ^167 343 012 141.00 ½25 ^167 343 003 132.00 ^167 343 013 161.00 ¾32 ^167 343 004 168.00 ^167 343 014 207.00 1

40 ^167 343 005 188.00 ^167 343 015 228.00 11/4

50 ^167 343 006 222.00 ^167 343 016 276.00 11/2

63 ^167 343 007 267.00 ^167 343 017 346.00 2

IR Plus® Fusion, L-Port


20 ^167 343 062 125.00 ^167 343 072 150.00 ½

25 ^167 343 063 141.00 ^167 343 073 172.00 ¾

32 ^167 343 064 178.00 ^167 343 074 218.00 1

40 ^167 343 065 200.00 ^167 343 075 243.00 1¼

50 ^167 343 066 235.00 ^167 343 076 293.00 1½

63 ^167 343 067 290.00 ^167 343 077 373.00 2

Female NPT, L-Port

Inch size

EPDM $ FPM $

3/8 *167 343 161 123.00 *167 343 171 148.00

½ ^167 343 162 125.00 ^167 343 172 151.00

¾ ^167 343 163 141.00 ^167 343 173 172.00

1 ^167 343 164 178.00 ^167 343 174 217.00

1¼ ^167 343 165 200.00 ^167 343 175 243.00

1½ ^167 343 166 235.00 ^167 343 176 293.00

2 ^167 343 167 288.00 ^167 343 177 373.00

Socket Fusion , T-Port


16 *167 343 201 113.00 *167 343 211 137.00 3/8

20 ^167 343 202 116.00 ^167 343 212 141.00 ½

25 ^167 343 203 132.00 ^167 343 213 162.00 ¾

32 ^167 343 204 168.00 ^167 343 214 207.00 1

40 ^167 343 205 188.00 ^167 343 215 228.00 1¼

50 ^167 343 206 222.00 ^167 343 216 275.00 1½

63 ^167 343 207 267.00 ^167 343 217 347.00 2

IR Plus® Fusion, T-Port


20 ^167 343 262 125.00 ^167 343 272 151.00 ½

25 ^167 343 263 141.00 ^167 343 273 172.00 ¾

32 ^167 343 264 178.00 ^167 343 274 217.00 1

40 ^167 343 265 200.00 ^167 343 275 243.00 1¼

50 ^167 343 266 235.00 ^167 343 276 293.00 1½

63 ^167 343 267 289.00 ^167 343 277 373.00 2

IIII

II

1.55



PROG

EF

Stan

dard

PP

IR Plus®/Butt Fusion - Dimensions


D L L2

20 10 10.50 46 130 62

25 10 23.11 56 144 74

32 10 27.31 97 150 78

40 10 49.72 82 171 88

50 10 63.03 98 191 94

63 10 97.34 120 220 113



D L L2 z

16 10 11.90 46 98 62 72

20 10 10.50 46 101 62 73

25 10 23.11 56 119 74 87

32 10 27.31 97 130 78 94

40 10 49.72 82 149 88 109

50 10 63.03 98 162 94 116

63 10 97.34 120 195 113 141

Check Valve - Type 360

Technical Features



• Good sealing properties with low head pressures (3 foot min.

head preferred)

• Ball cage molded into body

• Single elastomeric seal serves as ball seat and seal for

external closure

General

The Type 360 ball check valve available in EPDM and FPM seal configurations with IR/butt fusion and socket fusion union

ends allow valves to be connected into pipeline without additional fittings. Valve automatically stops flow in the back

direction when the fluid in the line reverses. The valve closes by the deadweight of the ball when vertically mounted. We

recommend that the line fluid velocity should not exceed 6.5ft/second (2m/sec).

DN

L2 L

dD

dD

DN

L2 Lz

1.56

Check Valve - Type 360 (A)Model

Union ends for easy installation and removal

Ball is sealing at a minimum water column of 1m

Vibration-free even at high velocity

Socket

d mm PN EPDM $ FPM $ Closest inch size16 10 *167 360 401 45.00 *167 360 411 52.00 3/8

20 10 ^167 360 402 52.00 ^167 360 412 58.00 ½25 10 ^167 360 403 58.00 ^167 360 413 65.00 ¾32 10 ^167 360 404 71.00 ^167 360 414 78.00 1

40 10 ^167 360 405 84.00 ^167 360 415 91.00 1¼50 10 ^167 360 406 101.00 ^167 360 416 117.00 1½63 10 ^167 360 407 148.00 ^167 360 417 182.00 2

IR Plus®

d mm PN EPDM $ FPM $ Closest inch size20 10 ^167 360 482 52.00 ^167 360 492 58.00 ½25 10 ^167 360 483 58.00 ^167 360 493 65.00 ¾32 10 ^167 360 484 71.00 ^167 360 494 78.00 1

40 10 ^167 360 485 84.00 ^167 360 495 91.00 1¼50 10 ^167 360 486 104.00 ^167 360 496 117.00 1½63 10 ^167 360 487 162.00 ^167 360 497 182.00 2

Female NPT

inch size

PN EPDM $ FPM $

3/8 10 *167 360 581 52.00 *167 360 591 58.00

½ 10 ^167 360 582 52.00 ^167 360 592 58.00

¾ 10 ^167 360 583 65.00 ^167 360 593 71.00

1 10 ^167 360 584 78.00 ^167 360 594 84.00

11/4 10 ^167 360 585 84.00 ^167 360 595 91.00

11/2 10 ^167 360 586 114.00 ^167 360 596 130.00

2 10 ^167 360 587 170.00 ^167 360 597 200.00

Socket - Silicone Free

d mm PN EPDM $ FPM $ Closest inch size16 10 *167 360 601 58.00 *167 360 611 65.00 3/8

20 10 *167 360 602 58.00 *167 360 612 65.00 ½

25 10 *167 360 603 78.00 *167 360 613 84.00 ¾

32 10 *167 360 604 91.00 *167 360 614 104.00 1

40 10 *167 360 605 104.00 *167 360 615 117.00 1¼

50 10 *167 360 606 123.00 *167 360 616 136.00 1½

63 10 *167 360 607 200.00 *167 360 617 221.00 2

IR Plus® - Silicone Free

d mm PN EPDM $ FPM $ Closest inch size20 10 *167 360 642 65.00 *167 360 652 71.00 ½25 10 *167 360 643 78.00 *167 360 653 84.00 ¾32 10 *167 360 644 90.00 *167 360 654 104.00 1

40 10 *167 360 645 104.00 *167 360 655 117.00 1¼50 10 *167 360 646 130.00 *167 360 656 143.00 1½63 10 *167 360 647 156.00 *167 360 657 168.00 2

Assembled with silicone-free lubricant

1.57



PROG

EF

Stan

dard

PP

Type 567 - Wafer Style

Lever Handle Gear Operator

Size D D1 min

D1 max

d2 H H1 H2 H3 L L1 L2 Q1 Q2 D3 H3 L1 L2 L3

2 19 120 125 104 264 77 134 54 45 106 205 40 160 68 120 132 236

2½ 19 140 145 115 277 83 140 54 46 106 205 54 35 160 68 120 132 236

3 19 150 160 131 289 89 146 54 49 106 205 67 50 160 68 120 132 236

4 19 175 191 161 325 104 167 55 56 106 255 88 74 160 68 120 132 236

5 23 210 216 187 352 117 181 55 64 106 255 113 97 160 68 120 132 236

6 23 241 241 215 373 130 189 55 72 106 255 139 123 160 68 120 132 236

8 23 290 295 267 435 158 210 67 73 140 408 178 169 160 68 120 132 236

Type 568 - Lug Style

Lever Handle Gear Operator

Size D D1 d2 H H1 H2 H3 L L1 L2 L3 Q1 Q2 D3 H H3 L1 L2 L3 L4

2 M16 125 150 265 77 134 54 45 106 205 150 40 - 160 279 68 120 132 236 150

2½ M16 145 170 277 83 140 54 46 106 205 160 54 35 160 291 68 120 132 236 160

3 M16 160 184 289 89 146 54 49 106 205 205 67 50 160 303 68 120 132 236 205

4 M16 180 216 326 104 167 55 56 106 255 244 88 74 160 339 68 120 132 236 244

5 M16 210 246 353 117 181 55 64 106 255 272 113 97 160 366 68 120 132 236 272

6 M20 240 273 374 130 189 55 72 106 255 297 139 123 160 387 68 120 132 236 297

8 M20 295 334 435 158 210 67 73 140 408 360 178 169 160 436 68 120 132 236 360

Butterfly Valve - Type 567/568

Technical Features



• Shorter installation length enable more compact systems


• Fully serviceable valve with an ergonomic handle and built in

seat removal

• EPDM and FPM seals available

General

Designed for line sizes 2" to 8", the Type 567 and 568 butterfly valves offer lower actuation torque and an ANSI 150# bolt

pattern. Wetted materials are manufactured in the same material as the base piping system and are rated for pressures

up to 150psi. Lug style Type 567 valve is ideal for use as a dead-end service valve, while the wafer style Type 568 valve is

idealy suited as a light weight multipurpose inline valve. Also available pneumatically and electrically actuated, see "Valve

and Instrumentation" price list (information available).

1.58



Butterfly Valve - Type 567/568 (A)

Butterfly Type 567 Wafer StyleLever Operator

Size PN Part Number $ EPDM Seal

Part Number $ FPM Seal

2 10 167 567 002 211.00 167 567 022 267.00

2½ 10 167 567 003 235.00 167 567 023 288.00

3 10 167 567 004 266.00 167 567 024 317.00

4 10 167 567 005 320.00 167 567 025 405.00

5 10 167 567 006 416.00 167 567 026 492.00

6 10 167 567 007 458.00 167 567 027 592.00

8 10 167 567 008 589.00 167 567 028 691.00

Gear Operator



2 10 167 567 042 550.00 167 567 062 585.00

2½ 10 167 567 043 574.00 167 567 063 610.00

3 10 167 567 044 610.00 167 567 064 658.00

4 10 167 567 045 676.00 167 567 065 718.00

5 10 167 567 046 782.00 167 567 066 836.00

6 10 167 567 047 783.00 167 567 067 885.00

8 10 167 567 048 927.00 167 567 068 1,053.00

Butterfly Type 568 Lug StyleLever Operator



2 10 167 568 102 378.00 167 568 122 490.00

2½ 10 167 568 103 403.00 167 568 123 530.00

3 10 167 568 104 456.00 167 568 124 582.00

4 10 167 568 105 548.00 167 568 125 706.00

5 10 167 568 106 714.00 167 568 126 904.00

6 10 167 568 107 786.00 167 568 127 1,086.00

8 10 167 568 108 1,011.00 167 568 128 1,267.00

Gear Operator



2 10 167 568 142 1,086.00 167 568 162 1,303.00

2½ 10 167 568 143 1,110.00 167 568 163 1,352.00

3 10 167 568 144 1,152.00 167 568 164 1,398.00

4 10 167 568 145 1,167.00 167 568 165 1,415.00

5 10 167 568 146 1,311.00 167 568 166 1,571.00

6 10 167 568 147 1,328.00 167 568 167 1,694.00

8 10 167 568 148 1,475.00 167 568 168 1,767.00

1.59



PROG

EF

Stan

dard

PP

Angle Body, Female NPT - Dimensions

Size PN Part Number $ a b

½ 10 157 522 581 80.00 28 31

Globe Body, Female NPT - Dimensions

Size PN Part Number $ c

½ 10 157 522 556 80.00 65

Needle Valve - Type 522

Technical Features



• Shorter installation length enables more compact systems


• Fully serviceable valve with an ergonomic handle

and built in seat removal

• EPDM and FPM seals available

General

The Type 522 needle valve may be used in a wide range of services where Beta PP-H is suitable in the chemical and

general environmental limits of the installation. Specific applications should be evaluated on the basis of pressure,

temperature (see "George Fischer Engineering Handbook") and flow capacity desired. The¼” and 3/8” ports are standard

pipe threads (NPT) and may be adapted to tube fittings, socket adaptors or other piping components.

Angle Body

3.5" max.3.2" min.

c

2.00"

FLOW

2.0"

a

b

FLOW

Panel thickness.50" max..18" min.

3.5" max.3.2" min.

c

2.00"

FLOW

2.0"

a

b

FLOW

Panel thickness.50" max..18" min.

Globe Body

1.60



Line Strainer (B)Features

True Union Design for easy installation and removal

Protects valves, pumps, etc. from becoming soiled

Socket Fusion

d mm PN EPDM $ FPM $ D mm

L mm

L2 mm

H mm

Z mm

20 10 *167 305 000 130.00 *167 305 049 150.00 52 168 130 75 140

25 10 *167 305 050 140.00 *167 305 099 170.00 62 192 150 80 160

32 10 *167 305 100 155.00 *167 305 149 190.00 68 206 160 90 170

40 10 *167 305 150 190.00 *167 305 199 235.00 85 230 180 110 190

50 10 *167 305 200 225.00 *167 305 249 280.00 85 256 200 125 210

63 10 *167 305 250 320.00 *167 305 299 390.00 102 294 230 150 240

IR Plus® Fusion

d mm PN EPDM $ FPM $ D mm L mm L2 mm H mm

20 10 *167 305 300 130.00 *167 305 349 150.00 52 238 130 75

25 10 *167 305 350 140.00 *167 305 399 170.00 62 264 150 80

32 10 *167 305 400 155.00 *167 305 449 190.00 68 280 160 90

40 10 *167 305 450 190.00 *167 305 499 235.00 85 306 180 110

50 10 *167 305 500 225.00 *167 305 549 280.00 85 332 200 125

63 10 *167 305 550 320.00 *167 305 599 390.00 102 368 230 150

Section 1 - Design Plastic Systems · Analytical Sensor Tee 1.13 Reducer 1.14 ... (DVS 2207-11)...

Documents

Transcript of Section 1 - Design Plastic Systems · Analytical Sensor Tee 1.13 Reducer 1.14 ... (DVS 2207-11)...