SECO-LARM 2011 Condensed Catalog Ver.B4B
description
Transcript of SECO-LARM 2011 Condensed Catalog Ver.B4B
2
*
*
*
*
*
*
*
*
*
~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SK-910RBQ
SK-910RA, SK-910RAV
External or internal battery power. External or internal triggering. Use to make almost any security output wireless. Other specifications similar to SK-919TD1S-UP.
SK-919TDWS-BU
SK-910RBQ 11~24 VAC/VDC, 10A@24VDC relay output.SK-910RA Mini size, 11~24 VAC/VDC, 3A relay output.SK-910RAV Mini size, 3~13.8 VDC, 5A transistor ground output.
SK-919TD1S-UP Factory pre-coded.
SK-919TT1S-BU DIP switch coding.
Sample Application:Make push-to-exit plate or keypad wireless.
Leather pouch for SK-919TD1S-UP & SK-919TT1S-BU.
Control garage doors, house lights, etc. Output is programmable for 4sec momentary
(default), 1sec momentary, toggle, or validity. (SK-910RBQ also features a latching mode.)
LED indicates RF reception, learn mode entered, transmitter learned, memory cleared.
Over 68 billion possible codes. LED transmission indicator.
SK-910RAV2SK-910R2Q
SK-910RB2Q 11~24 VAC/VDC, 2 x 10A@24VDC relay outputs.SK-910RAV2 Mini size, 3~13.8 VDC, 2 x 3A transistor ground outputs.
SK-919TD2A-UP Factory pre-coded. Over 68 billion possible codes.SK-919TD2A-U Uncoded. Over 68 billion possible codes.SK-917T2A-U CODEBUMP™ codehopping technology, 18 quintillion codes.
SK-915BA12VDC Battery for all transmitters except handheld.
Each output independently configurable (SK-910RB2Q only).
Outputs are programmable for 4sec momentary (default), 1sec momentary, toggle, latch, or validity. (SK-910RB2Q also features a latching mode.)
Two LEDs indicate RF reception, learn mode entered, transmitter learned, memory cleared.
SK-910R4Q 11~24 VAC/VDC, 4 x 10A@24VDC relay outputs.
SK-919TP4J-NU Factory pre-coded. Over 68 billion possible codes.
SK-917TP4J-NU CODEBUMP™ codehopping technology, 18 quintillion codes.
LED transmission indicator.
Control garage doors, house lights, etc. Outputs are programmable for timed
(1, 2, 3, 4, 5, 10, 30, and 60 seconds), toggle, latching, or validity modes.
Four LEDs indicate RF reception, learn mode entered, transmitter learned, memory cleared.
Extreme durability ¯ Rubber buttons eliminate damage caused by electrostatic discharge. Gold-plated battery clips and contact points extend the life of the transmitter.
Includes two 3VDC lithium batteries and visor clip. Slimline design: 31/2”x23/16”x1/2” (89x56x12 mm).
SK-919TP1H-BU --- 1 Button, 1 ChannelSK-919TP2H-NU --- 2 Buttons, 3 ChannelsSK-919TP4H-NU --- 4 Buttons, 15 Channels
SK-9HBCBelt-clip holster for slimline handheld transmitters.
X-930-0893VDC Lithium battery for handheld transmitters. Belt-Clip Holster
Battery
SK-91ERSD Up to 1,000ft (300m) range max.
Extends the range of SECO-LARM RF receivers. Plugs into the receiver.
SK-915LP
Similar to SK-910RBQ, but 433.92MHz. SK-910R-4Q
SK-939TS1S-B Same as SK-919TT1S-BU,
but 433MHz.
SK-910R2-4Q Similar to SK-910RB2Q, but 433.92MHz.
SK-910R4-4Q Same as SK-910R4Q, but 433.92MHz.
SK-939TS4J-NU Same as SK-919TP4J-NU, but 433.92MHz.
SK-939TS2A-PQ Same as SK-919TD2A-UP, but 433.92MHz.
315MHz
Up to500ft
SK-910RC4Q 5 Relay Outputs Four relays, one per channel, each 10A@24VDC.
Outputs are programmable for timed (1, 2, 3, 4, 5, 10, 30, and 60 seconds), toggle, latching, or validity modes.
Auxiliary 12VDC relay output (wet contact): 1sec~10min adjustable via built-in potentiometer.
Compatible with all SECO-LARM 315MHz transmitters.
Optional central receiver accessories include: Weatherproof transmitter (SK-919TPWFEUQ). Wireless magnetic contacts (SM-93T19Q). Wireless PIR sensor (E-9908-1T19Q).
See Page 3 for additional information regarding the above products.
315MHz
Up to500ft
315MHz
Up to500ft
315MHz
Up to500ft
315MHz
Up to500ft
315MHz
Up to500ft
315MHz
Up to500ft
315MHz
Up to500ft
315MHz
Up to500ft
*Actual range may vary greatly depending on the installation and operating environment.
315MHz
Central Receiver
1-Button Transmitters
Slimline Handheld TransmittersWired 1-Button Transmitter
Extended Range Antenna
2-Button Transmitters
4-Button Transmitters
1-Channel Receivers 2-Channel Receivers 4-Channel Receivers
2011 Condensed Catalog
3
*
*
*
For remote activation of locks, cameras, etc. from a desk or other location.
Use in offices, factories, etc. Portable, attractive, heavy-duty aluminum
case. Includes rechargeable battery and power adapter. Compatible with all SECO-LARM 315MHz receivers.
EVP-1SA4P4UL 4 Outputs, 4A Continuous, PTC Fuses
EVP-1SA4P9UL 9 Outputs, 4A Continuous, PTC FusesEVP-1SA8P16UL 16 Outputs, 8A Continuous, PTC Fuses
EVP-1SD2P4UL 4 Outputs, 2A Continuous, PTC Fuses
EVP-1SD4P9UL 9 Outputs, 4A Continuous, PTC Fuses
EVP-1SD6P16UL 16 Outputs, 6A Continuous, PTC Fuses
EVP-1SD2B4ULQ 4 Outputs, 2A Continuous, Blade-Style Fuses
EVP-1SD4B9ULQ 9 Outputs, 4A Continuous, Blade-Style Fuses
EVP-1SD6BHULQ 16 Outputs, 6A Continuous, Blade-Style Fuses
Individual red status indicator LEDs for each output. Includes enclosure, power cord, and transformer. Output voltage adjustable to compensate for
voltage drop. Output fuses rated 1.1 Amp for PTC, 1 Amp for blade. Main power switch to turn on/off power to outputs. Built-in backup battery charger. Power Distribution Board also available. See pg. 16.
EVP-124M6P16Q 16-Output CCTV Power Supply, 6A Continuous
Individual status LEDs. Individually protected
PTC-type fused outputs.
SK-919TP2D-P2-Button Desktop Transmitter
SK-919TP2D-F2-Button Footswitch Transmitter
Individual red status indicator LEDs for each output. Main power switch with surge protection. Includes enclosure and transformer. Output voltage adjustable to compensate for
voltage drop. Output fuses rated 1.1 Amp. Main power switch to turn on/off power to outputs. Power Distribution Board also available. See pg. 16.
PH-A1612-GUQ16-CH, 12A Continuous, Glass Fuses
PH-A1612-PUQ16-CH, 12A Continuous, PTC FusesPH-A3224-GUQ32-CH, 24A Continuous, Glass Fuses
PH-A3224-PUQ32-CH, 24A Continuous, PTC Fuses
Field-selectable 24 or 28 VAC outputs, or OFF. Output fuses rated at 3 Amp per channel. Glass fuses conveniently accessible from the front
panel (PH-A1612-GUQ and PH-A3224-GUQ). Dual-color LED status indicator for each output
(Blue --- normal, Red --- fault, OFF --- not in use). Removable terminal blocks for easy wiring. Rack, wall or desk (stackable) mountable. Built-in surge protection. Dimensions (excluding bracket):
13/4”x171/2”x113/8” (44x445x289 mm).
Monitors up to two zones per premises or vehicle, plus manual paging.
Connect to burglar or communications panels.
Range: Up to 1 mile (1.6km). Includes belt-clip
vibrating receiver (E-35RV).
SECOPAGE 35EV
E-35RV Spare receiver. Built-in audible & vibrating
function for silent paging.
E-35ANT-A Use as alternative to AM or CB antenna.
Blade-Style or PTC Fuses
Available!
Individual red status LEDs for each output. Output fuses rated 3A@250VAC. Output adjustable to compensate for voltage drop. Main power switch with surge protection. Maximum 9 Amp continuous output current.
PS-D1610-BUQ16 Outputs, 9A Continuous, Blade-Style Fuses
PS-D1610-PUQ16 Outputs, 9A Continuous, PTC-Style Fuses
8 Outputs are 12VDC. 8 Outputs are 24VAC. Extra-large enclosure. For small CCTV
power supply case.
EVP-RMB-AQ
For large CCTV power supply case.EVP-RMB-BQ
315MHz
SK-919TPWFEUQWeatherproof Transmitter
Similar to the SK-919TDWS-BU. With terminal blocks. Weatherproof IP65. Indoor/outdoor use.
E-9908-1T19QWireless PIR Sensor
20ft Sensing range. Pet immunity.
Up to500ft
315MHz
Up to500ft
*Actual range may vary greatly depending on the installation and operating environment.
SM-93T19QWireless Magnetic Contacts
Weatherproof IP66. Indoor/outdoor use.
PS-U0405-PUQ4 Outputs, 5A Continuous, PTC FusePS-U0905-PUQ9 Outputs, 5A Continuous, PTC FusePS-U1806-PUQ18 Outputs, 6A Continuous, PTC Fuse
Switched mode provides greater efficiency. Reduced heat extends the life of your power supply. Lightweight. Ultra-low ripple voltage for improved image quality. Output fuses rated 2.5 Amp for PTC.
27MHz
www.seco-larm.com
RF Wireless Controls
24VAC CCTV Power Supplies
12VDC/24VAC CCTV Power Supply
12VDC CCTV Power Supplies
Rack-Mount CCTV Power Supplies
Central Receiver Accessories
High-Amp DC Power Supplies
Alarm Pager System
Rack-Mount Brackets
Switching CCTV Power Supplies
Power Distribution Boards (See Pg. 16)
4
Series
Series
Series
True Day/Night Operation. 1/3” Sony Super HAD CCD. 600 TV Lines. IR cut filter. 2.8~10.5mm F1.2 Tamron lens. Flush or surface mount. Service monitor port for convenient installation. OSD (On-Screen Display) with remote. Advanced 256x DSS (Digital Slow Shutter). DNR (Digital Noise Reduction).
1/3” Sony Super HAD CCD. 360° Triple-axis rotation. Heavy-duty, vandal-resistant. Cables concealed in bracket
to prevent tampering. Ceiling and wall brackets
available.
Sony 1/3” Super HAD II CCD. 360° Triple-axis rotation. Heavy-duty, vandal-resistant. Cables concealed in bracket
to prevent tampering. Ceiling and wall brackets
available.
EV-122C-DVB3Q 3.6mm Lens, GrayEV-122C-DVH3Q 3.6mm Lens, WhiteEV-122C-DVAVQ 4~9mm Lens, GrayEV-122C-DVHVQ 4~9mm Lens, White
Wide Dynamic Range. 540 TV Lines. 2.8~11mm Varifocal lens. OSD & included remote control.
EV-2625-NKEQ
EV-2636-NKEQ
Ceiling and wall brackets available for the two cameras above.
EV-2706-N3GQ 3.6mm Lens, GrayEV-2706-N3WQ 3.6mm Lens, WhiteEV-2706-NFGQ 4~9mm Lens, GrayEV-2706-NFWQ 4~9mm Lens, White
EV-2646-NKGQ 2.8~12mm Lens EV-2656-NKGQ 2.8~12mm Lens with 3DNR
1/3” Sony Super HAD CCD. 550 TV Lines. DNR (Digital Noise Reduction)
for clear image in low light. 42 IR LEDs. EV-2656-NKGQ incorporates OSD
(On-Screen Display) for easy programming and DWDR (Digital Wide Dynamic Range) for clear images under strong backlighting.
Advanced 256x DSS (Digital Slow Shutter).
360° 3-Axis rotation. Dual voltage: 12VDC or 24VAC. Easy adjustment of zoom and focus.
1/3” Sony Super HAD CCD. 2.8~10.5mm Tamron F1.2 Varifocal lens. 12VDC. Service monitor port.
EV-2660-NKBQ
CDS Auto Switch True Day/Night and IR cut filter.
Dual voltage: 12VDC/24VAC.
EV-2660-NKBAQSame as EV-2660-NKBQ, but with:
36 IR LEDs.
EV-2661-NKBQSame as EV-2660-NKBAQ, but with:
EV-2221-N3BQ 3.6mm Lens, 420TVLEV-2801-N3BQ 3.6mm Lens, 540TVLEV-2221-NKBQ 2.8~11mm Lens, 420TVLEV-2801-NKBQ 2.8~11mm Lens, 540TVL
EV-2125-N3WQ 3.6mm Lens, White
1/3” Sony Super HAD II CCD. 420 TV Lines. Small size:
3” (76mm) diameter. Low current draw: 100mA@12VDC.
1/3” Sony Super HAD CCD. 18 IR LEDs, up to 50ft (15m) range. Tamper-resistant design. Day/Night operation.
EV-2806-NMMQ 1/3” Sony Super HAD CCD. 2.8~12mm Lens. 540TVL. Dual voltage: 12VDC/24VAC. Digital Noise Reduction. OSD (On Screen Display). 360° 3-Axis gimbal. Digital Wide Dynamic Range
for specific light conditions. 33 IR LEDs. Gray base with interchangeable black and
white covers included.
1/3” Sony Super HAD II CCD. Heavy-duty, vandal-resistant
design. Dual voltage: 12VDC/24VAC. Low current draw: 280mA. Size: 51/2”x41/2” (140x115 mm). 18 IR LEDs.
EV-2186-NKEQ 2.8~11mm, 420TVLEV-2786-NKEQ 2.8~11mm, 540TVL
EV-2166-N3WQ 3.6mm, 420TVL, 18 LEDs EV-2766-N3WQ 3.6mm, 540TVL, 18 LEDs EV-2166-NVWQ 4~9mm, 420TVL, 21 LEDs EV-2766-NVWQ 4~9mm, 540TVL, 21 LEDs
1/3” Sony Super HAD II CCD. Heavy-duty, vandal-
resistant design. 12VDC. Low current draw: 200mA. Size: 41/4”x31/2” (108x85 mm).
1/3" Sony CCD. 3.6mm Lens. 420 TV Lines. 24 IR LEDs, 50ft (15m) range.
EV-122C-DXB3Q
EV-2240-N3BQ 3.6mm Lens, 1/3”. Excellent daytime dynamic range. 480 TV Lines provide a crisp, clear
image.
3.7mm Pinhole lens. 1/3” Sony Super HAD CCD. 420 TV Lines. No exposed screws. Small size: 3”x115/16” (77x49 mm). Low-profile design, extends outward only 1”.
EV-122C-FVB3Q
EV-2845-N2EQ Ultra small size. 2.3mm Lens. 580 TV Lines. Housing can be surface
or flush mounted. Built-in DSS and DNR deliver
superior nighttime performance.
Weatherproof
for outdoor useIP66
Weatherproof
for outdoor useIP65
Weatherproof
for outdoor useIP66
Weatherproof
for outdoor useIP67
Weatherproof
for outdoor useIP66
Weatherproof
for outdoor useIP65
Weatherproof
for outdoor useIP65
Weatherproof
for outdoor useIP67
Weatherproof
for outdoor useIP66
Note: Model numbers that end with “Q” or products that have a round green “Q” sticker signify RoHS-compliant products.
Ball-Mount Dome Cameras (420TVL)
Armored Ball Turret Cameras
Ball-Mount Dome Cameras (540TVL)
Indoor 3-Axis Varifocal Domes (550TVL)
Indoor IR Dome Cameras
Mini Vandal Dome Camera
Vandal Varifocal Domes
DNR/DWDR/IR Vandal Dome Camera
Large Vandal IR Dome Cameras
Mid-Size Vandal IR Dome Cameras
Indoor IR Ball-Mount Camera
Indoor Dome Camera
Flush-Mount Ball “UFO” Camera
Wide-Angle Mini Dome Camera
2011 Condensed Catalog
36-LED Day/Night Cameras
5
Series
Series
VB-CF1Q Bracket for connecting IR camera
with IR illuminators.
VI-B1005-SAQ 24-LED IR illuminator. Works with most IR CCTV cameras.
1/3” Sony Super HAD CCD. Split-glass design
eliminates IR reflection. Low current draw
(250mA@12VDC with IRs on).
1/3” Sony Super HAD CCD. Split-glass design
eliminates IR reflection. Low current draw
(280mA@12VDC with IRs on).
EV-1026-N2SQ 2.9mm LensEV-1026-N3SQ 3.6mm LensEV-1026-N6SQ 6mm Lens
EV-1606-N2SQ 2.9mm LensEV-1606-N3SQ 3.6mm LensEV-1606-N6SQ 6mm Lens
1/3” Sony Super HAD CCD. 550 TV Lines. Dual voltage: 12VDC/24VAC. Advanced 256x Digital Slow Shutter. OSD (On-Screen Display) for easy programming. DWDR (Digital Wide Dynamic Range) for clear images
under strong backlighting. DNR (Digital Noise Reduction) for clear images
in low light. Cable concealed in the bracket for extra security. Low current draw (310mA with IR LEDs on). 14 IR LEDs for clear images in total darkness.
EV-1626-NKGQ 2.8~12mm, 14 IR LEDs EV-1626-NWGQ 6~50mm, 14 IR LEDs
50ft Range24 LEDs
1/3” Sony Super HAD II CCD. 36 IR LEDs, 100ft (30m) range. Cable concealed
in bracket for extra security.
EV-1146-N6SQ 6mm Lens, 420TVLEV-1646-N6SQ 6mm Lens, 540TVL
EV-1665-N2BQ 1/3” Sony Super HAD II CCD. 2.2mm Lens (170° viewing angle). 550 TV Lines.
EV-1636-NLGQ 3.5~16mm, 42 IR LEDs
EV-1636-NWGQ6~50mm, 60 IR LEDs
1/3” Sony Super HAD CCD. Third-generation DSP chip. 600 TV Lines. Dual voltage: 12VDC/24VAC. Advanced 256x DSS (Digital Slow Shutter). OSD (On-Screen Display)
for easy programming. DNR (Digital Noise Reduction)
for clear images in low light. Programmable 8-zone privacy settings. Cable concealed in the bracket for extra security. IR LEDs for clear images in total darkness.
EV-7105-NPEQ 500TVL Color, 570TVL B/W
1/4” Sony Super HAD CCD. 3.8~45mm Varifocal lens. 10X Optical zoom & 10X digital zoom. Day and night function. Max. 360° per sec. high-speed pan/tilt motion. Program up to eight sets of repetitive motions
between two preset positions. Program up to four different movement patterns. Advanced 128x DSS (Digital Slow Shutter). 24VAC Operation. 127 Preset viewing positions. For outdoor use, includes wall-mount bracket. White housing.
EV-1125-NVBQ 1/3” Sony CCD. 4~9mm Lens. 420 TV Lines. Low current draw: 160mA.
50ft Range24 LEDs
EV-1324C12 1/4” Sharp CCD. 3.6mm Lens. 380 TV Lines.
EV-5120-N3WQ 3.7mm Pinhole lens
(78° viewing angle). 1/3” Sony Super HAD II CCD. 420 TV Lines. 12VDC. Low current draw: 200mA.
EV-4605-N2SQ 2.3mm LensEV-4606-N2SBQ 2.3mm Lens, 30 LEDs
1/3” Sony Super HAD II CCD. 550 TV Lines. 2.3mm Lens,
160° viewing angle. EV-4606-N2SBQ is similar
to EV-4605-N2SQ, but includes 30 IR LEDs.
EV-5105-N3SQ 1/3” Sony Super HAD CCD. 550 TV Lines. 3.6mm Lens. Rugged, heavy-duty design suitable
for industrial applications.
EV-6100-N2SQ Camera is mounted behind
a one-way observational mirror, combining two forms of visual protection.
1/3” Sony Super HAD CCD. 420 TV Lines. 2.9mm Lens. 12VDC Operation.
Weatherproof
for outdoor useIP66
Weatherproof
for outdoor useIP66
Weatherproof
for outdoor useIP66
Weatherproof
for outdoor useIP66
Weatherproof
for outdoor useIP66
Weatherproof
for outdoor useIP66
Weatherproof
for outdoor useIP66
Weatherproof
for outdoor useIP66
Weatherproof
for outdoor useIP66
www.seco-larm.com
IR Illuminator
24-LED Day/Night Cameras (420TVL)
Mini DNR/DWDR/IR Cameras Wide-Angle Bullet Camera
DNR IR Bullet Cameras Mini PTZ Camera
Varifocal Bullet Camera
Bullet Camera
PIR Camera
Corner-Mount Cameras
Discreet Wall-Plate Camera
Surveillance-Mirror Camera
24-LED Day/Night Cameras (540TVL)
6
Transmits a monochrome video signal up to 2,000ft (610m) or color up to 1,300ft (400m).
Video, power, and data over Cat5e/6.
Built-in multi-color LED indicates AC or DC power and polarity.
Removable terminal blocks.
2,000ft (610m) Video range. Built-in power converter
similar to ST-LA105-TTQ (see page 14).
Built-in dual-color LED indicates power & polarity.
Built-in DC-plug power connector & data wire.
DR-104-250Q --- 4-Channel, 250GB HDDDR-108-250Q --- 8-Channel, 250GB HDDDR-116-500Q --- 16-Channel, 500GB HDD
Operation: Live/Playback, Record, Network. Dual-CODEC for H.264. Two USB 2.0 ports. Motion detection. Video input x 4, 8, or 16 (BNC). Alarm detection: NO/NC, programmable. Motion detection: 16x12 detection grid. Remote access via PC, Mac®, or smartphones such
as iPhone®, Android™, and Windows Mobile. Up to 240PPS recording for DR-108-250Q and
DR-116-500Q. Up to 120PPS recording for DR-104-250Q. Free DDNS server. Includes free CMS software. Dual-stream support for simultaneous remote access
at low bandwidth. Remote live view, PTZ control, configuration,
backup, and playback anywhere in the world via Internet Explorer.
E-mail event notification with optional video attachment. EZ Copy--- Simple one-button video export. Supports internal SATA DVD/RW or hard drive. VGA and BNC video outputs. One audio input per video input channel. Multi-language OSD manual. U.S.-based tech support. 3-Year warranty, including hard drive. Rack mount, wall mount, or stackable.
Optional Accessories:DRA-BAQ – Alarm Input BoardDRA-RBQ – Rack-Mount BracketsDRA-RMQ – Spare IR RemoteDRA-PAQ – Alarm Input Pigtail*DRA-PSQ – Audio Input Pigtail**Note: These pigtails are for use with DR-108-250Q or DR-116-500Q only.
EVT-PC4-VT2Q 4-Port Video Balun Card
The ENFORCER DR-100 series of Network H.264-based DVRs are the perfect units to go with other ENFORCER rack-mount CCTV products or with any CCTV system.
EVT-PC4P-JTQ
Connects up to four CCTV cameras (per PCI card) to a central location using low-cost Cat5e/6 UTP cable.
Range: Up to 2,000ft (610m).
Optional power- distribution card.
Includes a 12VDC, 4 Amp power adapter.
2,000ft (610m) Video range. Built-in voltage booster specs
similar to ST-HB105-TTQ (see page 14).
Compensates for DC voltage drops over long cable runs.
Input voltage: 7~24 VDC. Output voltage: 12 or 24 VDC (jumper selectable).
Vernier adjustment for each voltage. Output current: 500mA@12/24 VDC. Built-in dual-color LED indicates power and polarity. Built-in DC-plug power connector, data wire,
and BNC connector.
EVT-PB1-H05Q
EVT-PB1-31RQ
EVT-PB1-L05Q
EVT-PB1-318Q Same as EVT-PB1-31RQ, but with
RJ-45 jack instead of terminal block.
VC-1BAQ Converts almost any LCD
monitor into a security monitor. NTSC or PAL input. Video input auto-configure. On-screen display (OSD)
functions: color, contrast, tint, and brightness.
Desktop or wall mountable. Compact size, perfect for plug-and-play installation. Input connector: BNC. Output connector: VGA (DB15 VGA connector). 5VDC Power adapter included. Output: NTSC: 640x480, PAL: 768x576.
EVT-PB1-31RGQ Same as EVT-PB1-31RQ, but with a built-in ground
loop isolator.
EVT-PC8P-JTQ Same as EVT-PC4P-JTQ,
but with eight ports and 6 Amp adapter.
EVT-PC8-VTDQ Same as EVT-PC4-VT2Q,
but with eight ports.
Similar to EVT-PB1-L05Q, but with RJ-45 jack instead of terminal block.
EVT-PB1-L05AQ
Similar to EVT-PB1-H05Q, but with RJ-45 jack instead of terminal block.
EVT-PB1-H05AQ
Extend keyboard, mouse, camera or any USB devices over Cat5/ Cat5e/ Cat6. USB 1.1 compliant. Up to 150ft (50m) range,
or further with low-power devices. Small size, only 21/2”x17/16”x7/8” (64x37x22 mm)
excluding 9” (230mm) USB connection.
DE-S101Q
High resolution, up to 1280x1024 NTSC. BNC Pass-through output. Stores settings in case of power loss. Smaller size.
VC-3BAQ
VGA input resolution: Up to 1024x768. (DB15).
Ouput: Composite video (BNC connector), plus VGA pass-through (DB15).
VC-2VAQ Converts a VGA signal to composite video for viewing on any monitor or TV with a composite input.
Similar to VC-1BAQ, but with:
4-Port Power-Distribution Card Extend VGA range to 984ft (300m) over one Cat5e/6 cable.
For our full line of VGA baluns, please see pg. 17.
H.264 Network DVRs BNC to VGA Converters
Passive VPD Baluns w/ Voltage Converter
Passive VPD Baluns w/ Voltage Booster
Passive Video, Power, Data (VPD) Baluns
PCI Balun Hub Cards
USB Over Cat5e/6 (Passive)
VGA Baluns
2011 Condensed Catalog
VGA to BNC Converter
7
VG-1C12AQ
Gold-plated BNC connector. Passive operation --- No external power required. High immunity to interference --- Built-in
impedance-coupled device and noise filter. BNC terminals for easy installation.
EVT-PB1Q
EVT-PBP-V1TQ
EVT-PB1-V1TSQ
EVT-PB1-V1TGQ
Patent pending
Built-in surge protection. Gold-plated BNC connector. Screw terminals for
reliable installation. Transmits up to:
2,000ft (610m) B/W, 1,300ft (400m) color.
Gold-plated BNC connector. Built-in ground loop isolation. Removable terminal block. Built-in surge protection. Transmits color signal up to 984ft (300m).
EVT-PBM-V27Q
EVT-TB1-42TQ
EVT-PBM-V17Q
Active Video Balun Receiver
Active Video Balun Set Includes EVT-TB1-42TQ transmitter
and EVT-RB1-4T2Q receiver.
EVT-AB1Q
Up to 1.5mi (2.4km) with active transmitter. Video, data, and surge protection. Interlockable.
EVT-RB1-4T2Q
Up to 1.5mi (2.4km) with active receiver. Video, data, and surge protection. Interlockable.
Female gold-plated BNC, fits a 9/16"x5/8" hole in a single-gang plate.
Transmits up to 2,000ft (610m). RJ-45 Connection.
Male gold-plated BNC, fits a 9/16"x5/8" hole in a single-gang plate.
Transmits up to 2,000ft (610m). RJ-45 Connection.
Active Video Balun Transmitter
EVA-RS1 Connects up to 32 devices. Range: Up to 3,937ft (1,200m).
EVT-PH4-V2WOQ
Output: Four (4) RS-485 connectors.
Range: Up to 3,937ft (1,200m). Connect up to 64 cameras
or devices via RS-485.
RD-304-D1Q
Gold-plated BNC connector. Screwless terminal block for
easy installation. Transmits up to:
2,000ft (610m) B/W, 1,300ft (400m) color.
6” BNC Pigtail connector. Gold-plated BNC connector. Screw terminals for
reliable installation. Transmits up to:
2,000ft (610m) B/W, 1,300ft (400m) color.
EVT-PH16-4T2Q 16-Port Passive Balun Hub
Connect up to 16 CCTV cameras to a central location using low-cost Cat5e/6 UTP cable.
Works with all SECO-LARM baluns. Compact enclosure, only 1U (13/4”, 44mm) high. Mounts in a standard 19” rack, or stackable. Built-in transient surge protection and interference
technology for existing UTP cables. Gold-plated BNC connectors. Transmits up to: 2,000ft (610m) B/W,
1,300ft (400m) color.
EVT-AH16-VT2Q 16-Port Active Balun Hub
Rack mount or stackable. Compact enclosure, only 1U (13/4”, 44mm) high. Video in: 16 (terminal blocks). Video out: 32 (BNC connectors). Power input: 12~24 VDC/VAC. Current draw: 500mA. Built-in video and data surge protection. Perfect for use with DVRs. Transmits up to: 3,000ft (914m) w/ Passive Balun,
1.5mi (2.4km) w/ Active TX.
Connects up to four CCTV cameras to a central location using low-cost Cat5e/6 UTP cable.
Works with full-motion CCTV cameras up to 2,000ft (610m) away via passive video baluns.
RJ-45 or screwless terminal block output.
VA-1102B-WQ 1 Input, 2 Outputs
VA-1104B-WQ 1 Input, 4 Outputs Distributes single video input to multiple video outputs. Compatible with color or black/white signals. Transmits up to 984ft (300m). NTSC or PAL compatible. Connect to video camera,
multiplexer, VCR, DVR, etc. Voltage: 12VDC or 24VAC. Power adapter included. Power loop-out
(VA-1102B-WQ only). Gold-plated BNC connectors.
VA-2101B-WQ 1 Input, 1 Output
VA-2404B-WQ 4 Inputs, 4 Outputs Video amplifier compensates for video loss. Brightness and sharpness adjustments for each channel. NTSC or PAL compatible. Transmits up to 3,280ft (1,000m). LED to indicate power. 12VDC Power adapter included. Power loop-through to power nearby devices.
RD-304-D1Q
RD-316-R1Q
Output: Sixteen (16) RS-485 connectors. Range: Up to 3,937ft (1,200m). Connect up to 256 cameras or devices via RS-485. 12VDC Power adapter (included). Built-in surge protection and signal isolation. Dual-colored LED:
Red --- RS-485 activity, Blue --- Power ON. Rack or wall mountable. Compact enclosure, only 1U (13/4”, 44mm) high.
RD-316-R1Q
www.seco-larm.com
Passive Video Baluns
4-Port Passive Video Hub
RS-232 to RS-485 Converter
Snap-In Passive Video Baluns
Active Video Baluns
Data Distributors
Rack-Mount Passive Balun Hub
Rack-Mount Active Balun Hub
Ground Loop Isolator
Video Distributors
Video Amplifiers
8
VD-10BNA Dummy Box Camera with flashing LED
VD-10BN Dummy Security Camera with flashing LED
VD-30BS Dummy IR Bullet Camera with flashing LED
VD-10PL Dummy IR Bullet Camera with Real Working IR LEDs
VD-20BNA Dummy Dome Camera with flashing LED
VD-20BN Dummy Ball-Mount Dome with flashing LED
VD-40BN Dummy PTZ Speed Dome with flashing LED
KD-100Q Dummy Keypad
Keypad LEDs flash. Keypad “beeps” when
keys are pressed. Weather-resistant for outdoor use. Uses two or four (AAA) batteries.
CA-1610-3FLQ* DC Male plug, 3ft (0.9m) wire. LED indicates power and polarity.
CA-161T-02SQ DC Plug-to-terminal block, 21/2” (64mm) wire.
EVA-CB0R1Q BNC-to-RCA connector. Gold-plated connectors.
*U.S.A. and international patents pending.
CA-161T-02SLQ* DC Plug-to-terminal block, 21/2” (64mm) wire. LED to indicate power and polarity.
EVA-WB0B1-08Q 6” (15cm) Male-to-female
BNC connector. Gold-plated BNC connector.
CA-171T-02Q RJ-45 Male-to-terminal
block with 2” (5cm) cable.
CA-1616Q DC Plug-to-plug
adapter.
CA-1515Q DC Jack-to-jack
adapter.
CA-1526-1FQ DC Jack-to-double
DC plug, 1ft wires.
Black/Red Wires
CA-151T-02SQ DC Jack-to-terminal block, 21/2” (64mm) wire.
CA-151T-02SLQ* DC Jack-to-terminal block, 21/2” (64mm) wire. LED to indicate power and polarity.
CA-161T DC Plug-to-terminal block.
EVA-F5521-3Q DC Plug, pigtail connector, 3ft.
EVA-M5521-3Q DC Jack, pigtail connector, 3ft.
*Patent pending
Anodized aluminum housing (US 28). 12 or 24VDC (selectable). No residual magnetism. MOV surge protection. Adjustable mounting bracket. Complete mounting hardware for typical installations. “L” bracket and “Z” brackets available for easy
mounting (see pg. 9). Detachable faceplate. Built-in dual-colored status LED and bond sensor to
show locking status (E-941SA-600PQ only).
E-941SA-600 600-lb Holding Force, UL Listed
E-941SA-600PQ 600-lb Holding Force, UL Listed
Anodized aluminum housing (US 28). 12 or 24 VDC (selectable). No residual magnetism. MOV surge protection. Adjustable mounting bracket. Complete mounting hardware for typical installations. “L” bracket and “Z” brackets available for easy
mounting (see pg. 9). Detachable faceplate. Built-in dual-colored status LED and bond sensor to
show locking status (E-941SA-1K2PQ and E-941SA-1K2PD only).
UL Listed (E-941SA-1200 and E-941SA-1K2PQ only).
E-941SA-1200 1,200-lb Holding Force, UL Listed
E-941SA-1K2PQ 1,200-lb Holding Force, Bond Sensor, LED, UL Listed
E-941SA-1K2PD 1,200-lb Holding Force, Bond Sensor, LED, Timer 1~78 sec (not UL Listed).
10 SECO-LARM maglocks now UL listed.
X-714-046-18B Hook-and-loop cable tie. Organize loose cables.
CA-151R DC Jack-to-terminal block.
CA-1510-3FLQ* DC Female jack, 3ft (0.9m) wire. LED indicates power and polarity.
CA-1615-06LQ* DC Jack-to-plug, 6” (152mm) wire. LED indicates power and polarity.
CBA Series Dummy Cameras
Illuminated Power ConnectorsDC Pigtail Connectors
CCTV Accessories
Snap-In DC Connectors
Snap-In DC Connectors with LED
600-lb Single-Door Maglocks
1,200-lb Single-Door Maglocks
2011 Condensed Catalog
9
E-941S-600/ZQ (for 600-lb series locks)
E-941S-1K2/ZQ (for 1,200-lb series locks)
E-941S300R/ZQ (for E-941SA-300RQ)
“L” BracketsE-941S-600/LQ (for 600-lb series locks)
E-941S-1K2/LQ (for 1,200-lb series locks)
E-941S300R/LQ (for E-941SA-300RQ)
“U” (glass door) BracketsE-941S-600/UQ (for 600-lb series locks)
E-941S-1K2/UQ (for 1,200-lb series locks)
E-941S300R/UQ (for E-941SA-300RQ, includes “Z”, “L”, and “U” brackets)
“Z” Brackets
Plate SpacersE-941S-300/PQ (for E-941SA-300)
E-941S-600/PQ (3/16” for 600-lb series)
E-941S-1K2/PQ (1/4” for 1,200-lb series)
E-941D-600/PQ (for 600-lb double-door)
E-941D-1K2/P (for 1,200-lb double-door)
E-941S300R/PQ (for E-941SA-300RQ)
1,200-lb Holding force for each door. 12 or 24 VDC (selectable). Status-sensing relay output and dual-color status LED
(green: locked, red: unlocked). Anodized aluminum (US 28). No residual magnetism. MOV surge protection. Adjustable mounting bracket. Complete mounting hardware for typical installations. “L” bracket and “Z” brackets available for easy
mounting. Detachable faceplate.
E-941DA-1K2QDouble-door, 1,200-lb, UL
E-941DA-600Q
Similar to E-941DA-1K2Q and E-941DA-1K2P, but 600-lb holding force per door.
Double-Door, 600-lb, UL
E-942FC-1K3SQ1,300-lb Holding Force
E-942FC-600SQ600-lb Holding Force
Includes E-942FC-1300 gate lock with brackets for lock and armature.
For outdoor sliding or swinging electric gates. Weld or bolt brackets directly to gate. Corrosion-resistant, zinc-plated brackets. Black finish matches most gates. Lock is water-resistant
and vandal-resistant. Adapter and mounting
hardware included.
Same as E-942FC-1K3SQ, but 600-lb holding force and smaller profile.
(Magnetic lock portion only)
Armature Plate HolderE-941S-600/HQ (for 600-lb series)
E-941S-1K2/HQ (for 1,200-lb series)
Batteries not included
EAP-5D1Q --- 12 or 24 VDC
EAP-5D1MQ Same power-supply board
used in EAP-5D1Q.
E-941DA-1K2PDouble-door 1,200-lb, Bond Sensor, LED, UL
E-941DA-600PQDouble-Door, 600-lb, Bond Sensor, LED, UL
For small, low-security drawers or cabinets.
Holding force: 80-lb (36kg) @ 12VDC 110-lb (51kg) @ 24VDC.
12 or 24 VDC.
E-941SA-80Q
Magnet can be reversed in the housing for right-hand or left-hand swinging doors.
For indoor use, similar to the 600-lb and 1200-lb single-door maglocks.
Anodized aluminum (US 28).
Optional mounting brackets: E-941S300R/ZQ: “Z” and “L” bracket E-941S300R/LQ: “L” bracket E-941S300R/UQ: “U”, “Z”, “L” bracket
E-941SA-300RQ
Ideal for sliding or swinging gates.
Holding force: 1,300-lb (591kg).
E-942FC-1300
Water- and vandal-resistant. Dual-threaded conduit fitting. 61/2 ft Hookup cord. 12 or 24 VDC. "Z" and "L" brackets available.
E-942FC-600 For sliding or
swinging gates. Holding force:
600-lb (272kg). Water- and vandal-resistant. Dual-threaded conduit fitting. 61/2ft Hookup cord. 12 or 24 VDC. "Z" and "L" brackets available.
E-942F1300/ZQ (for E-942FC-1300)
E-942F-600/Z (for E-942FC-600)
“Z” BracketsE-942F-1300/L (for E-942FC-1300)
E-942F-600/L (for E-942FC-600)
“L” Brackets
For indoor and outdoor applications.
Weatherproof. 3ft (0.9m) Hookup wire included. Input voltage — 12VDC.
E-941SA-300
Outdoor
Supply Current: 5A@12VDC / 4.5A@24VDC AC Power failure supervision relay with delay timer:
5 seconds, 5 minutes, 5 hours. LED overload indicator and automatic shutdown for
short-circuit protection. Over-current fuse-protected AC input. Automatically switch to backup battery if AC fails. Individual AC input and DC output LED status
indicators.
PD-5PAQ 5-Output Power
Distribution Board (see pg. 16).
Indoor
Please visit www.seco-larm.com for photos.
www.seco-larm.com
Maglock Mounting Brackets
Double-Door Maglocks Gate Locks with Weldable Brackets
Access Control Power Supply
300-lb Electromagnetic Locks
80-lb Electromagnetic Lock
Electromagnetic Gate Locks
Gate Lock Mounting Brackets
10
SD-995C
UL 1034 Burglary. Field-selectable for fail-safe or fail-secure operation. Field-selectable dual-voltage: 12/24 VDC. Powered by a solenoid. Reversible, non-handed design fits either right-hand
or left-hand doors. Low profile: Strike is only 11/4” (32mm) deep. Includes three faceplates for nearly any type of door.
SD-994C
SK-990AQ Fail Secure
For use in wood doors. Baked painted finish.
Fail-secure operation
Fail-safe operation
For concealed mounting.
5/8” (17mm) Bolt extension. Fail-safe operation. 12VDC Input. Narrow design:
77/8"x15/16" (200x32 mm). Door-position monitoring output (NO/NC/COM).
Similar to SD-997BQ, but fail-secure (locks when power disconnected).
Incorporates manual lock/unlock cylinder to operate the SD-997A-DQ if power is lost.
SD-997BQ
SD-997SMB-AQ*
SD-997A-DQ
Surface-mount bracket set for SD-997BQ.
Manual lock/unlock cylinder
Lockknob
SD-993B-SS1,500-lb Shear Lock
SD-993S-UB“U” Bracket
Bracket for mounting on most glass doors.
SD-993S-SBSurface-mount Bracket
Holding force: 1,500-lb (680kg).
Small size for use with most metal door jambs. Works with sliding, single-action, and
double-action (swing-through) doors and gates. Fail-safe operation. 12 or 24 VDC.
For surface mounting of shear lock (when recessed mounting is not possible).
Surface-type door closer. Non-handed operation. Separate adjustment of
both closing and latch speeds.
Designed to conduct power to electric locks or access control devices mounted in doors.
18” (46cm) Stainless-steel cable. Mounting screws included.
SD-969-S18Die-cast aluminum end caps.
SD-969-A18Plastic end caps.
SD-969-S18
SD-969-A18
For exit doors -- Allows exit from inside while locked from outside.
Reversible non-handed design. For metal or wood doors. Stainless-steel 3/4" (19mm) throw-latch bolt. Deadlocking latch. Can be unlocked for extended periods of time. Fits doors from 30"~48" (0.7~1.2m) wide. Heavy-duty, steel construction.
Rugged, heavy-duty construction. For 36” (0.9m) doors. Actual length is 34.5” (0.88m). Includes two built-in dual-contact switches (5A@125VAC). Includes SECO-LARM SD-969-A18 Armored Door Cord.
SD-961A-36
Redesigned _ Easier to install.
SD-C141S
SD-962AR-36A
Similar to SD-995C, but for use in wood doors.
SD-994C24Same as SD-994C, but 24VDC.
ANSI-sized — 715/16"x17/16"x13/8". Reversible for right-hand
or left-hand doors. Jaw strength — 2,000-lb. Stainless-steel lip (keeper)
for strength and long life. Non-polarized connection.
SD-995C24Same as SD-995C, but 24VDC.
Current draw — 150mA@24VDC.
SD-996C-NUQ
For use in metal doors.Field-programmable in seconds for fail-secure or fail-safe operation.
Includes 3 faceplates
Fail Safe/Fail Secure
12/24 VDC
SD-997UB-AQ* “U” Bracket for SD-997BQ for glass doors.
*Use with SD-997BQ only.
Use with SD-962AR-36A. USD26D Finish. Non-handed.
SD-962HL-4A
(2 Keys included)
Power-off locking. Power unlocking. For entrance doors.SK-990BQ Fail Safe Power locking. Power-off unlocking.
Entry-Type Lever Trim
SD-962AR-36G
Grade 1, through-bolted design. Rigid, non-clutch mechanism. Non-handed design,
easily field-reversible.
SD-962H-6LB
ANSI A156.3, Grade 1 heavy-duty exit device. Conforms to and meets ADA regulations. UL Listed. For use in institutions, schools, and commercial
buildings where heavy-duty, reliable operation is required.
Current draw — 250mA@12VDC.
(2 Keys included)
Electric Shear Lock Universal Door Strike
Electric Deadbolts
Rim-Type Exit Devices
Push-to-Exit Bar
Door Closer
Armored Door Cords
Electric Door Strikes
2011 Condensed Catalog
11
Remotely and securely talk to visitors and unlock doors or gates.
Camera and monitor turn on and off via push button.
Camera and monitor turn off automatically if not in use.
DP-121Q
SD-927PKC-NEQ No Touch --- Just wave a
hand in front of the sensor. Sensing range up to 4" (10cm). Attractive "ring" illuminator turns
from red to green on sensor activation. Reduces risk of cross contamination. Reliable IR technology senses motion.
SD-927PKC-NSQ
DP-121-CQ Additional CameraDP-121-SQ Additional Monitor
PR-K1S1-A
10 Cards included. Sealed and weatherproof (IP67). Mounts easily to interior or
exterior walls. Up to 100 users. Output relay for timed (1~180 sec) or latch mode. Egress input for simple exiting of protected area. Tri-color wave-shaped LED status bar indicates
proximity reader’s mode and status. Blue : On/Valid Card indicator. Green: Programming Mode. Red: Invalid Card.
PR-112S-A
Additional cards sold in packs of 10.
EM-125.
Note: Max. two cameras and two monitors per system.
Same as SD-927PKC-NEQ, but in Spanish.
SD-927PWCQ Same as SD-927PKC-NEQ,
but with white plate and white body. Includes decals in English,
Spanish, and French.
One output: Form C relay output (5A@28VDC).
100 Unique 4~8 digit codes. Stainless-steel faceplate. Easily delete individual codes. Programmable wrong-code lockout. Programmable output relay
activation buzzer. Relay output inhibit control.
SK-1011-SQ
SK-1131-SQSimilar to SK-1011-SQ, but with: 120 user codes, three outputs, backlit keys, mantrap, alarm output, door- forced-open warning, duress output, door auto relock, and other advanced features.
Auto or manual-code entry checking. Egress input. Built-in tamper (N.C.) circuit. EEPROM memory: Prevents data loss. Power: 12~24 VAC/VDC. Backbox included. Limited lifetime warranty.
110 User codes. For solar applications keypad
illumination can be dimmed or turned off during standby.
Tamper switch, security screws, and heavy-duty construction.
Each output can be programmed for momentary (1~999 sec) or toggle.
SK-1123-SQ Surface Mount, 2 Outputs:5A@28VDC (relay), 1A@28VDC (relay)
Three outputs: - Main relay: Form C, 5A@28VDC. - Aux. relay: Form C, 1A@28VDC. - Transistor ground output (100mA@24VDC).
120 Unique 4~8 digit codes. Backlit keyboard is easy to use at night. Three LEDs can be wired as needed. Door-propped-open warning. Alarm output, mantrap, and door auto-relock features,
plus much more. Backbox included. Limited lifetime warranty.
(Keys are backlit)
Each code can be programmed for 4~8 digits. Egress input for exiting the protected premises. 12~24 VAC/VDC. Fits standard single-gang electrical box (SK-1123-FQ).
PR-K1K1-AQ Proximity keyfobs. Sold in packs of 10. EM-125.
SK-2323-SDQMullion-Style Keypad
1,010 Users. 12~15 VDC operation. Two Form C relay outputs. Each relay has programmable output
time from 1~99 seconds or toggle. Rugged, weatherproof (IP65) design. Backlit keys for easy nighttime use. Two egress inputs. Door sensor input. Built-in tamper sensor. All features are programmed from the keypad. Circuitry is potted with epoxy for outdoor use.
SK-2323-SPQMullion-Style Keypad with Built-in Proximity Reader
Similar to SK-2323-SDQ, but with proximity reader. Three programmable access modes --- proximity
card only, proximity card or user code access, or combined proximity card with user code access.
Compatible with all SECO-LARM proximity cards.
SK-1323-SPQSealed-Housing Stand-Alone Keypad with Built-In Proximity Reader
Similar to SK-1323-SDQ, but with proximity reader.
SK-1323-SDQSealed-Housing Stand-Alone Keypad
Features similar to SK-2323-SDQ.
SD-9163-KSVQ Same as SD-9263-KSVQ,
but slimline.
SD-9163-KSQ Same as SD-9263-KSQ,
but slimline.
SD-9263-KSQ Same as SD-9263-KSVQ, but
no mechanical override button.
SD-927PKC-NFQ Same as SD-927PKC-NEQ,
but in French.
SD-9263-KSVQ Single-gang No-Touch sensor. Adjustable sensing range and
delay time. Mechanical override button.
SD-9163-KS2Q Same as SD-9263-KS2Q,
but slimline.
SD-9163-KS1Q Same as SD-9263-KS1Q,
but slimline.
SD-9263-KS1Q Same as SD-9263-KSQ,
but in Spanish.
SD-9263-KS2Q Same as SD-9263-KSQ,
but in French.
PR-K1S1-A and PR-K1K1-AQ are compatible with all SECO-LARM proximity reader products (PR-112S-A, SK-2323-SPQ, and SK-1323-SPQ).
SK-1123-FQFlush Mount, 2 Outputs:5A@28VDC (relay), 100mA@24VDC (transistor)
SK-1123-SDQ Industrial, 2 Outputs:5A@28VDC (relay), 1A@28VDC (relay)
Similar to SK-1123-SQ, but with: Large, rigid steel enclosure. Extra-tamper-resistant faceplate.
Weatherproof
for outdoor useIP67
www.seco-larm.com
Indoor No-Touch Sensors
Video Door Phone
Stand-Alone Proximity Reader
Indoor Access Control Keypads Outdoor Access Control Keypads
Outdoor No-Touch Sensors
Proximity Cards and Keyfobs
12
SD-7103GC-PTQ Similar to SD-7103GC-PEQ,
but with timer. Built-in timer, 1~180 seconds. Buzzer output for audio status.
Similar to SD-7201GC-PEQ, but with “EXIT” and “SALIDA” messages on faceplate.
SD-7201GCPE1Q
2" Square illuminated green push button.
NO/NC contacts rated 10A@125VAC.
Includes switchable English and Spanish messages.
SD-7202GC-PEQ
Similar to SD-7201GCPE1Q, but with DPDT switch.
Two NO and two NC contacts, each rated 5A@125VAC.
SD-7201GFPE1Q
SD-7201RC-PE1 Similar to SD-7201GCPE1Q,
but with red mushroom-cap push button.
Green, 11/2” dia., illuminated, mushroom-cap push button.
NO/NC, DPST contact rated 5A@125VAC.
SD-7251GCEX1Q
SD-7202GC-PTQ Similar to SD-7202GC-PEQ,
but with timer. Built-in timer, 1~180 seconds. Buzzer output for audio status.
SD-7275SGEX1Q Single-gang, vandal-resistant. 1” Diameter, illuminated
red/green push button.
SD-7175SGEX1Q Slimline, vandal-resistant. 1” Diameter, illuminated
red/green push button.
SD-7201GA-PT1 Similar to SD-7201GCPE1Q,
but with timer. Built-in timer, 1~180 seconds. Buzzer output for audio status.
SD-7103GC-PEQ Stainless-steel slimline plate. Small, green, illuminated
push button.Includes switchable English
and Spanish messages.
SD-7204SGEX1Q Single-gang, vandal-resistant. 1” Diameter push button. NO/NC contacts.
SD-72051-V0Shunt switch, shunt ON/momentaryOFF, single-gang plate.
SD-71051-V0Same as SD-72051-V0, but slimline.
SD-72002-V0Shunt switch, maintained ON/OFF, single-gang plate.
SD-71002-V0Same as SD-72002-V0, but slimline.
SD-7101KBPE1Q Slimline, black N.C. push button.
SD-7201KBQ
SD-7101RAEX1Q Slimline, red N.O. push button.
Single-gang plate. Black push button. N.C. switch.
Similar to SD-7202GC-PEQ, but with white plate.
SD-7223GW-LQ
Similar to SD-7201GCPE1Q, but with white plate.
SD-7217GWQ
SD-8202GT-PEQ Green, illuminated 2" square push button.
SD-8103GT-PEQ Slimline, small square illuminated push button.
SD-8201GTPE1Q Green, 1½" diameter, mushroom-cap push button.
Ideal for hard-to-wire installations.
Built-in RF transmitter.
SS-199 Stainless-steel slimline plate
with 3/4” D-hole.
SS-299 Stainless-steel plate
with 3/4” D-hole.
Stainless-steel faceplate. Green mushroom-cap push button. NO/NC contacts rated 5A@125VAC.
SD-7201GC-PEQ
Same as SD-7213-GSP, but slimline.
SD-7113-GSP
Same as SD-7213-GSP, but with stainless-steel push button and guard ring.
SD-7273-SSP
SD-7173-SSP Same as SD-7213-GSP,
but with stainless-steel push button and guard ring.
Same as SD-7213-GSP, but with red push button.
SD-7213-RSP
Green mushroom-cap push button.
NO/NC contacts rated 5A@125VAC.
Built-in pneumatic timer, 1~60 seconds.
No power required.
SD-7213-GSP
SD-6173-SSQ Same as SD-6273-SSQ, but slimline.
SD-6273-SSQ Single-gang, vandal-resistant. Field-programmable color,
red or green. Weather resistant.
SD-7104SGEX1Q Slimline, vandal-resistant. 1” Diameter push button. NO/NC contacts.
Mushroom R-T-E Plates Illuminated R-T-E Plates
Vandal Resistant, Illuminated
R-T-E Plates with Timer
Remote Plates
R-T-E Key Switch Plates
Push Button R-T-E Plates
R-T-E Plates with Pneumatic Timer
RF Wireless R-T-E Plates
Vandal-Resistant RTE Plates
Piezo Electric Push Buttons
2011 Condensed Catalog
13
6-Beam E-9644-6B25 - Black Enclosure
E-9644-6W25 - White Enclosure
4-Beam E-9622-4B25 - Black Enclosure
E-9622-4W25 - White Enclosure
8-Beam E-9660-8B25
Black, 60” (152cm) long. Range: 25ft (7.5m) outdoor, 50ft
(15m) indoor. Similar to the E-9611-2B25, but
eight beams and 60” long. Black enclosure only.
10-Beam E-9680-10B25
Black, 80” (203cm) long. Range: 25ft (7.5m) outdoor, 50ft
(15m) indoor. Similar to the E-9611-2B25, but 10
beams and 80” long. Black enclosure only.
E-932-D33TBQPhotoelectric Through-Beam SensorRange: 33ft (10m)
For indoor or outdoor use. NO or NC alarm output. N.C. tamper circuit included. Interruption time adjustable. Built-in laser beam alignment system makes
for quick, easy installations.
Flush-mount design. Fits single-gang box. For entrances, hallways, offices, etc.
Outdoor range: 90ft (30m)
Outdoor range: 290ft (90m)
Outdoor range: 190ft (60m)
E-960-D90Q
E-960-D290Q
E-960-D190Q
90ft (30m) Sensing distance.
IP66 for indoor and outdoor use.
Mounts flat or at 90o to the wall with no need for extra brackets.
Adjustable lens angle.
E-961-S90WQ Multi-frequency (four channels selectable). Reduces interference between multiple
units installed in close proximity. Weatherproof, sunlight-filtering case for indoor
& outdoor conditions. Anti-frost system with built-in heater. NO/NC alarm output. N.C. tamper circuit. Quick, easy installation with built-in laser beam
& audible alignment system. Built-in alignment-strength indicator.
Outdoor range: 165ft (50m)
Outdoor range: 660ft (200m)
Outdoor range: 330ft (100m)
E-964-Q165Q
E-964-Q330Q
E-964-Q660Q
With laser beam alignment
The E-964-D390Q has all the same features as the E-960-D90Q, D190Q, and D290Q, including laser beam alignment.
Incorporates a 4-frequency function (programmable) to eliminate the possibility of interference when multiple photobeams are located within close proximity.
Outdoor range: 390ft (120m)
E-964-D390Q
4 Frequencies to eliminate interference.
Outdoor range: 495ft (150m)
E-964-Q495Q
441/2” (113cm) Long. Range: 25ft (7.5m) outdoor, 50ft
(15m) indoor. Similar to the E-9611-2B25, but six
beams and 441/2” long.
2-Beam E-9611-2B25 - Black Enclosure
E-9611-2W25 - White Enclosure
Uses 12~240 VDC/24~240 VAC. Pre-wired 6ft (1.8m) cord. Weatherproof (IP66) construction
for indoor/outdoor usage. Brackets (2) and mounting
hardware included.
E-931-S35RRQ
E-931ACC-RCQ3” Round Reflector.
111/4” (29cm) Long. Range: 25ft (7.5m) outdoor, 50ft (15m) indoor. For windows, doorways, skylights, etc. Rugged aluminum construction. LED alignment indicator. No synchronizing wires required. Slimline design: 115/16”x7/8” (34x23 mm). Trigger by breaking two adjacent or any
one single beam (programmable).
221/2” (57cm) Long. Range: 25ft outdoor, 50ft indoor. Similar to the E-9611-2B25, but four
beams and 221/2” long.
E-931ACC-HRQHood for the E-931ACC-RCQ or E-931ACC-R (2” square reflector.)
E-932-S16RRQPhotoelectric Reflective-Beam SensorRange: 16ft (5m)
E-931-S33PRQRange: 33ft (10m)
For assembly-line automation, outdoor gates, garage doors, or overhead doors.
Excellent immunity to shiny objects that could cause false triggering.
Operates on 12~250 VAC/VDC.
The E-931-S33PRQ Polarized Reflective-Beam Sensor provides reliable detection of shiny objects that could be missed by a non-polarized sensor.
Range: 35ft (10m)
With laser beam alignment
With laser beam alignment
www.seco-larm.com
Reflective-Beam Sensor
Flush-Mount Beam Sensors
Twin Photobeam Detectors Curtain/Barrier Sensors
Multi-Frequency Photobeam
Quad Photobeam Detectors
Single Photobeam Detector
Polarized Reflective-Beam Sensor
14
ST-1206-1.5AQST-2406-2AQST-2406-3AQST-2406-5AQST-2406-7AQST-2406-10AQ
ST-2406-7AQST-2406-5AQ
Regulated and filtered output voltage.
Short-circuit protection. Built-in backup battery charger. Switches to backup battery
automatically in case of power loss.
Convert low-voltage AC input power to low-voltage DC output power.
Model #
ST-1206-1.5AQST-2406-2AQST-2406-3AQ
Voltage (DC)
Current Current (peak)
Dual-input voltage: 120/240 VAC, 50/60Hz. Works with the SECO-LARM series of
power supply/chargers. Shielded windings to
reduce electromagnetic interference.
ST-UV16-W100Q 16VAC/100W
ST-UVDA-W100Q 24/28 VAC/100W*ST-UVDA-W180Q 24/28 VAC/180W*
ST-UV24-W50Q 24VAC/50W
ST-2406-10AQ6/12/246/12/24
6/126/12/246/12/24
6/12/247A4A
1.5A1.5A2.5A
9A7.5A5A
2A2A3A
10A
ST-UV28-T350Q 28VAC/350W
Efficiency Level
ST-UV12-S0.5Q 0.5 Amp
ST-UV12-S1.0Q 1 Amp
ST-UV12-S2.0Q 2 Amp
ST-UV12-S3.0Q 3 Amp
ST-UV12-S4.0Q 4 Amp
ST-UV12-S5.0Q 5 Amp LED power indicator. Universal 100~240 VAC input. Regulated 12VDC output. 6ft (1.8m) Cord, 2.1mm plug (+ center). Includes AC power cord (IEC320-C13). Low current draw.
Use in CCTV, access control alarms, etc.
6ft (1.8m) Line cord, 2.1mm positive center coax plug.
Sideways plug for ease of use on power strips. Universal 100~240 VAC input. Regulated 12VDC output. Low current draw. 6ft (1.8m) Cord, 2.1mm plug (positive center).
ST-HB105-TTQ
ST-LA105-TTQ 0.5 Amp
ST-LA110-TTQ 1 Amp
Converts 8~30 VAC/VDC to a regulated selectable and adjustable 5/12/24 VDC output: 8~30 VDC/VAC input for 5 VDC output 15~30 VDC/VAC input for 12 VDC output 24~30 VDC/VAC input for 24 VDC output
Small size for easy installation.
ST-1212-R0.5A500mA, Regulated
ST-2406-2AQ
ST-UV12-S1.0Q Shown
Fits easily on power strip
LED power indicator
Triggered by positive voltage (+DC), closure of dry contact, or opening of dry contact.
Adjust from 1sec to 60min. Form C relay.
SA-026Q
SA-025Q
Miniature: 13/16"x29/32"x5/8". Adjustable from 1~180 sec. Buzzer output. Form C relay.
5 Amp relay, DPDT, Form C.
6/12/24 VDC operation. LED indicates power.
SR-2224-C5Q
SA-027Q
365-Day annual timer. 12~24 VAC/VDC Operation. Two NO or NC Form C relays: 10A@120VAC / 28VDC. Each relay can be programmed for 50 events, total of
100 individual programmable events. 100 Programmable events can be set weekly, daily or
hourly 365 days a year. One egress input per relay (two total). Output can be shunt or momentary, and can be
programmed for 1~99 seconds.
ST-UV16-W50Q 16VAC/50W
ST-2406-10AQ
* Dual-voltage output: 24 or 28 VAC SA-025EQ 12~24 VDC Operation. Lock control relay (SPDT):10A@24VDC. Remote alarm relay: 10A@24VDC. Local alarm, transistor ground output. Three relocking modes via jumper:
—Standard (preset) —BOCA —Timed
SH-532L 128dB Multi-tone siren. Miniature size: 4” long, 3½” diameter. 6~12 VDC, 1.4A current draw.
SA-006DQ Siren driver with dual-power inputs. Two tones, steady and burst. 6~12VDC operating voltage.
ST-UV12-S3.0QShown
Compensates for DC voltage drops over long cable runs: 7~12VDC input for 12VDC output 12~24VDC input for 24VDC output
Output current: 500mA@12/24 VDC.
SA-025E1Q 12/24 VDC Operation. Lock control relay (SPDT):
10A@24VDC. Buzzer output: 85dB.
SA-025EQ Shown
Efficiency Level
Open-Frame Transformers
12VDC Linear Power Supply
Power Supply Chargers
Tabletop Switching Power Supplies
12VDC Plug-in Switching AC Adapters
Voltage Booster
Voltage Converters
Relay Board
Programmable Timers
Programmable Annual Timer
Delayed Egress Timers
Siren Driver
Siren
2011 Condensed Catalog
15
SM-207Q N.C. 3/8” press-fit mount
with leads. 1” Gap.
SM-207-5LQ N.C. mini 3/8” press-fit mount
with leads. 1” Gap.
SM-204Q N.C. mini self-stick surface mount
with flange and center leads. 1” Gap.SM-204M -- Magnet for SM-204Q/205Q.
SM-205Q N.C. self-stick surface mount with
flange and side leads. 1” Gap.SM-204M -- Magnet for SM-204Q and SM-205Q.
SM-206Q N.C. 1/4” recessed
mount with leads. 1” Gap.
SM-207-5Q N.C. mini 3/8” press-fit mount
with leads. 3/8” Gap.
SM-209 N.C. mini self-stick surface
mount for screens, with leads. 3/4” Gap.
SM-266 N.C. super-thin screen mount
with leads. 11/4” Gap.
SM-200Q N.C. surface mount with
screw terminals. 3/4” Gap. Includes cover.SM-823 -- Additional terminal cover.
SM-300Q N.O. surface mount with screw
terminals. 3/4” Gap. Includes cover.
SM-852LQ Aluminum “L” bracket for SM-226LQ.
SM-831 Alnico 5 magnet, 11/4”x1/4” dia.
SM-841 Alnico 5 magnet, 15/8”x3/8” dia.
SM-851 Aluminum “Z” bracket for SM-216Q.
SM-226LQ N.C. overhead door with “L” bracket.
24” Stainless-steel cable. 23/4” Gap.
SM-226L-3Q NO/NC overhead door with
“L” bracket. 23/4” Gap.
SM-226RQ N.C. overhead door with round
bracket. 24” Cable. 23/4” Gap.
SM-216Q N.C. wide-gap surface mount with
screw terminals. 23/4” Gap.SM-216M -- Magnet for SM-216Q.
SM-217Q N.C. wide-gap mini surface
mount with concealed screw terminals. 2” Gap.
SM-431-TQuick Connect Surface Mount For N.C. circuits. External screw terminals. 1" Gap. Available in brown or white.
SM-433-T Concealed Screws Surface Mount For N.C. circuits. Concealed screw terminals. 11/4" Gap. Available in brown or white.
SM-407-5TQuick Connect Recessed Mount For N.C. circuits. External screw terminals. 3/4" Gap. Available in white.
ST-BD01Q
Prevents deep discharge of backup batteries. Selectable input 12/24 VDC. Adjustable voltage cutoff and restore point. Green LED AC indicator & 2-color DC LED indicator.
Two NO/NC triggers. Two independent channels. Stores up to four numbers. Delivers message of up to 16sec to each number. Repeats message for one minute to ensure full delivery. Optional 9VDC internal battery. Use worldwide with Universal Dial Tone.
E-920B
ST-BT03Q12 or 24 VDC Tester, includes buzzer for audible continuity, and LED headlight.
Test for: 1. Voltage 2. Battery load 3. Voltage drop 4. PTC fuse 5. Polarity 6. Continuity
With 2 NO/NC triggers
ST-BL01Q Real-time, latch, and
auto-reset modes for testing N.O. and N.C. circuits. Features LED and
buzzer indicator for remotely testing a connection. Convenient headlight LED for
easy installations.
SM-207-31Q N.C. mini 1/4” press-fit mount.
1” Gap.
SM-207-41Q N.C. mini 3/8” press-fit mount.
13/4” Gap.
ST-BT02Q 6-in-1 12VDC Battery tester with continuity LED.
ST-BT02Q Shown
Indicates the condition of rechargeable gel-type 12VDC batteries.
Equipped with a momentary simulated load. Portable and easy to use.
www.seco-larm.com
Overhead Door ContactsQuick-Connect Magnetic Contacts
Recessed Contacts
Self-Stick Contacts Magnetic Contact Accessories
Screen Contacts
Wide Gap Contacts
Surface-Mount Contacts
Low Battery Cutoff
Voice Dialer
Multi-Purpose Battery Testers
High-Speed Latching Tester
16
SS-038-2CSBO Shadow/eyeball switch.
SS-090KN Extra keys. Specify number
when ordering (1300~1310).
SS-090 Two terminals, shunt SPST. Maintained ON-OFF, key removable
from both ON and OFF positions. Specify key number when ordering.
SS-095 Two terminals, momentary SPST. Maintained OFF, springs back from
ON, key removable from OFF only. Specify key number when ordering.
SS-090-1H0 Similar to SS-090, but key removable
in OFF position only (key #1300).
SS-092-2A0 Two internal SPST switches,
one always ON, one always OFF (key #1300).
SS-078Q N.O. latching panic button.
SS-076Q Toggle switch. Available in gray or white.
SS-074Q N.O. double-button
momentary hold-up switch.
SS-075Q N.O. “EMERGENCY” button.
SS-072Q N.O. tamper switch.
SS-040Q N.C. vibration/shock sensor.
Adjustable sensitivity.
SS-075C-PEQ Emergency & Push-To-Exit
NO or NC (selectable) momentary contact.
Three labels included.
ENFORCER 190 Audio discriminator. Patented design detects
high-frequency sound of glass breaking while filtering out ambient environmental noise.
When ceiling mounted, protects to a 25ft radius. Protects 45ft to the front and 25ft to either side.
Easy 2-wire connection for 6~12 VDC or 6~24 VDC.
SL-126QFor 6~12 VDC use.
SL-126-A24Q For 6~24 VDC use.
Perfect for "informative" household burglar alarm use. Incorrect polarity cannot damage circuit or draw current. Low current consumption with long-operating lifespan
of over 300 continuous hours (2,000,000 flashes). Choice of amber, blue, clear, green, or red lens. Lens is made of high-impact resistant acrylic, case
of high-impact resistant ABS plastic. SL-126LQ -- Extra lens for SL-126Q and SL-126-A24Q.
Choose amber, blue, clear, green, or red.
For entrance monitoring or entrance indicator.
“Ding-dong” or siren sound on beam interruption.
E-931CS22RRCQ Range: 22ft (6.7m)
Plug-in components. No hard wiring needed.
Includes reflector, brackets, 9VDC adapter, mounting hardware, chime.
Optional counter also available.
E-931ACC-CQ Counter for the E-931CS22RRCQ.
E-931ACC-SQ Additional speaker/chime for the
E-931CS22RRCQ.
Available in five colors: amber, blue, clear, green, or red.
LED Strobes feature a longer life with less heat generated.
Adjustable flashing speed. Programmable for flashing
strobe or rotating beacon mode (six different flash patterns).
SS-077Q N.C. latching panic button.
SS-073Q N.C. tamper switch.
SL-1301-BAQ 5 Strips (20 LEDs)
Available in four colors: white, red, blue or yellow (/WAQ, /RAQ, /BAQ, /YAQ).
12-LED strips for informative or decorative installations.
12VDC Operation. Each strip can be cut to
varying lengths depending on the application.
Strips can be connected end-to-end for maximum versatility.
Optional accessories: ● SL-SAS-PC1Q Power Connector ● SL-SAS-EC1Q End Cap ● SL-SAS-SH1Q LED Strip Fastener
SL-S212
4 High-intensity 1W LEDsSL-1311-MA
Available in four colors: amber, clear, blue or red.
10~30 VDC Operation. 19 Programmable flash
patterns. Synchronize up to 15 units.
SL-1302-MA
PD-4PSQ 4-Output, 1.1A each, PTC Fuses, 5 Amp.
Main input power fuse.
Includes circuit board only.
SH-504Q Miniature 85dB electronic buzzer. 5~15 VDC, surface mount or mount
in 3/4" (19mm) hole of alarm panel or remote plate.
Low current draw of 35mA@12VDC.
PD-4BSQ 4-Output, 1A each, Blade-style Fuses, 5 Amp.
PD-9PSQ 9-Output, 1.1A each, PTC Fuses, 5 Amp.
PD-9BSQ 9-Output, 1A each, Blade-style Fuses, 5 Amp.
PD-9PHQ 9-Output, 3A each, PTC Fuses, 10 Amp.
PD-9BHQ 9-Output, 3A each, Blade-style Fuses, 10 Amp.
SL-1301-BBQ 10 Strips (40 LEDs)
PD-5PAQ 5-Output, 1.1A each, PTC Fuses, 5 Amp.
52 High-intensity LEDs
IP66
(SL-126Q)
Detectors and Switches
Key Locks
Glass-Break Detector, Audio
Strobe Lights Entry Alert System
LED Strobe Lights
12-Inch LED Strips
High-Intensity LEDs
Power Distribution Boards
Buzzer
2011 Condensed Catalog
17
MVE-PB010Q Composite Video Balun
MVE-PB020QSnap-in Composite Video Balun
RCA-to-terminal block. Transmits composite video
YPbPr or RGB video signals. With screwless terminal block
connection and passive operation.
Transmits composite video YPbPr or RGB video signals.
Easily snaps in or out of wall plates or patch panels.
RJ-45 Jack. Passive operation. Max. distance:
Color - 2,230ft (680m), B/W - 2,550ft (780m).
MAE-P115-01QAnalog Audio Balun
MAE-P215-01QDigital Audio Balun
MAE-P127-01QSnap-in Analog Audio Balun
MAE-P227-01QSnap-in Digital Audio Balun
MAE-P317-01QStereo Balun
MAE-P337-01QStereo Mini (3.5mm) Plug Balun
RCA-to-terminal block. Transmits audio up to 1,000ft
(300m) over Cat5e/6 UTP cable. Gold-plated connectors.
RCA-to-terminal block. Transmits digital audio 600ft (180m)
over Cat5e/6 UTP cable. Supports Dolby Digital, DTS. Gold-plated connectors.
Easily snaps in or out of wall plates or patch panels.
RCA-to-RJ-45 Jack. Analog audio.
Eases installation of dual mono or single stereo audio over Cat5e/6 cable.
Dual RCA jacks (red/right, white/left) on 6” (15cm) pigtail-to-RJ-45 jack.
Transmits audio up to 2,500ft (760m) over Cat5e/6 UTP cable.
Gold-plated connectors.
Send audio over Cat5e/6 cable from mini-stereo plug.
Stereo mini plug on 6” (15cm) pigtail-to-RJ-45 jack.
Transmits audio up to 2,500ft (760m) over Cat5e/6 UTP cable.
Gold-plated connector.
MVE-PCW15Q
MVE-PC015Q
Transmits YPbPr or RGB video signals. Four RCA connectors to RJ-45 jack. Supports HDTV (480i /480p/720i/720p/1080i/1080p). Maximum distance:
160ft (50m)@1080p, 900ft (300m)@480i.
Passive operation, requires no power.
Stackable or wall mountable.
Programmable digital audio or IR pass-through.
Easily snaps in or out of wall plates or patch panels.
RCA-to-RJ-45 Jack. Digital audio.
Transmits VGA signals over Cat5e/6 cable.
Use with personal computer, DVR, etc. with VGA output to CRT or LED monitors or VGA projectors.
Up to 450ft (137m) range. Passive device. No power required. Sold in pairs.
EVT-SBP-GQ
MVD-V1501-1Q
Transmits VGA signals from a single source to multiple CRT or LCD monitors or VGA projectors.
Extends VGA range to 984ft (300m) over one Cat5e/6 cable.
Supports up to 1920x1200 resolution.
Each set includes one transmitter and one receiver.
Additional receiver (MVD-V1101-1RQ) available.
MVD-V1201-1Q
Transmits VGA signals from a single source to two CRT or LCD monitors or VGA projectors.
Extends VGA range to 984ft (300m) over one Cat5e/6 cable.
Supports up to 1920x1200 resolution. Each set includes one transmitter and one receiver. Additional receiver (MVD-V1101-1RQ) available.
MVD-V1101-1RQ Additional Receiver for the
MVD-V1501-1Q and MVD-V1201-1Q.
VGA Extender 1-In-5-Out
VGA Extender 1-In-2-Out
Similar to MVE-PC015Q, but wall-plate version.
MVA-EH01Q Component Video + Digital Audio to HDMI Converter
Input: Four RCA connectors (three for component video, and one for digital audio). Output: HDMI jack. Supports HDTV resolution up to 1080p. 5VDC Power adapter (included).
MVA-VH01Q VGA input (plus stereo audio) to HDMI signal. Allows display from computer on HDMI monitor.
Input: VGA connector and dual RCA jacks (red/right, white/left). Output: HDMI jack. HDCP Pass-through. 5VDC Power adapter (included).
The Full-Line 120-page 2011 SECO-LARM Catalog is now available. Contact us for a copy.
A/VMulti-Media
A /VMulti-Media
A /VMulti-Media
A /VMulti-Media
A /VMulti-Media
A /VMulti-Media
A /VMulti-Media
www.seco-larm.com
Composite Video Baluns
Audio BalunsComponent Video Baluns Passive VGA Balun
Active VGA Baluns
Component Video & Digital Audio to HDMI VGA & Stereo to HDMI Converter
2011 SECO-LARM Catalog
18
MVS-H4101-0Q
Black chrome cable
MC-1101-09FQ
Easily switch between any of four HDMI sources by remote control or push button.
Easily connects to different digital video sources (DVD, A/V receiver, satellite, game console, etc.).
HDTV: Resolution up to 1080p. 24K Gold-plated connectors. IR Remote control included.
9ft (3m) Length. HDMI Type-A to Type-A. Gold-plated connector. 28AWG OFD: 7.5. 90° Angle cable versions
also available.
MVE-AH010Q
MC-2201Q
MC-2101Q
For joining two HDMI cables together. Gold-plated contacts. Compatible with all 19-pin
HDMI cables, supports HDCP.
The ENFORCER MC-2201Q is used to join two HDMI cables together. It has gold-plated contacts for reliability and longer life.
MC-5501-09FQ 9ft (3m) Single-mode
optical patch cable. 2 x Toslink connectors.
MVR-HH01Q Extends high-definition video
and digital audio up to 115ft (35m). Supports high-definition video
up to 1080p.
Similar to MC-2201Q, but rotates 180°. Use for running HDMI cables
in tight locations.
Transmits an IP signal or any other TCP/IP signals over existing coax cable.
Distance up to 5,900ft (1,800m). 5VDC Adapter included.
IPB-A1200QActive IP Balun over Coax
Identical to IPB-A1200Q, but uses Cat5e/6 cable instead of coax.
Distance: Up to 3,900ft (1,200m). 5VDC Adapter included.
IPB-A1100Q Active IP Balun over Cat5e/6
Connect HDMI equipment using low-cost Cat5e/6 UTP cables. Works with full-motion video
and audio signal up to 195ft (60m). HDMI over Cat5e/6 without any signal loss. Supports 480i/480p/576i/576p/720p/1080i/1080p. Built-in equalization and signal-boost function. Auto-adjusts the equalization and amplification to
eliminate feedback. Compact size. 5VDC Power supply included. Supports DDC, EDID, and hot-plug detection.
IPR-P188QPoE Repeater
Extend power and data 300ft (100m). Use multiple units to extend power and data
range to 1,800ft (600m). Passive device, requires no external power. Compatible IEEE 802.3af PoE standard. Supports 10/100/1000 BASE-T. Built-in LED status indicator. Plug-and-play for easy installation.
MVE-AH020Q
Connect HDMI equipment using low-cost Cat5e/6 UTP cable. Works with full-motion video
and audio signal up to 164ft (50m). HDMI over Cat5e/6 without any signal loss. Supports 480i/480p/576i/576p/720p/1080i/1080p. Built-in equalization and signal-boost function. Auto-adjusts the equalization and amplification to
eliminate feedback. Compact size. 5VDC Power supplies included. Supports DDC, EDID and hot-plug detection.
MVE-AHW1Q
Active. IR Pass-through. Transmits HDMI signal
over dual Cat5e/6 cables. Range to 164ft (50m). Resolution to 1080p.
ENFORCER Active IP Baluns are designed to extend any TPC/IP devices beyond the 300ft (100m) limit of Ethernet. The units extend the range to 3/4mi (1.2km) for Cat5e/6 or 1.1mi (1.8km) for coax. Use existing coax or Cat5e/6 cable for the runs.IP over coax allows installation of an IP camera at the end of a coax run instead of having to pull new Cat5e/6 lines. The units do not filter out any protocols, codes, or applications, ensuring compatibility with any IP camera and its software.
A/VMulti-Media
A /VMulti-Media
A /VMulti-Media
A /VMulti-Media
A /VMulti-Media
A /VMulti-Media
A /VMulti-Media
HDMI/Optical Cable
HDMI over Cat5e/6
HDMI Switcher
HDMI Couplers
HDMI Repeater Active IP Baluns
Power Over Ethernet Repeater
HDMI over Single Cat5e/6
Wall-Plate HDMI over Cat5e/6
2011 Condensed Catalog
19
Two 2-button RF remotes: – Arm/disarm up to 200ft (60m). – Panic protection. Silent arm/disarm. – Defective zone & shock sensor bypass via remote.
Built-in dual-stage shock sensor (patented). 5-function LED shows armed, disarmed, valet,
learn mode, and RF reception. Emergency disarm/valet. Instant triggering. Current-sensing protection. Backup battery capability.
E-100LB Entry-Level AlarmEntry-level alarm system packed with the most wanted features including two slimline 4-button RF remote controls, relay for flashing parking lights, and outputs for door locks and starter disable.
E-300L Full-Featured 3-Channel Alarm
CBA® 33 Self-Contained Vehicle Alarm
SLI® 840 High-End Keyless Entry/AlarmThe perfect alarm for any vehicle security application. Use as a keyless entry system, or as a complete multi-featured alarm.
SLI® 762PP-ISS Passive Proximity ImmobilizerThe Passive Proximity Immobilizer eliminates the hassle of remembering how and when to operate a vehicle security system. Just put the included keyfob on the keychain, and the system arms and disarms automatically.
SLI® 762FP-ISS Touchkey ImmobilizerThe Touchkey Immobilizer combines high security with the convenience of completely passive arming. To arm, turn off the ignition. 30 Seconds later, up to two of the car’s electrical circuits are disabled. To disarm the system, insert the Touchkey momentarily into the Touchkey receptacle. Start the vehicle within 30 seconds or the Immobilizer will rearm.
SLI® 259A Dual-stage Microwave Sensor
SS-052B Dual-stage Electromagnetic Shock Sensor
SS-051ME Dual-stage Glass-break Sensor
SR-5220A /SR-5440A 2 & 4 Window Roll-up Modules
SR-5201R Power Door Lock Interface
Two 4-button RF remotes. Door lock outputs (+/–). Starter-disable output. Flashing parking lights (built-in relay). Dual-stage shock sensor (patented). 128dB Multi-tone siren. 5-Function LED. Multi-function push button. Multiple programming functions.
Two 3-button RF remotes. Dual-stage glass-break sensor with remote microphone. Dual-stage shock sensor. Starter-disable relay built-in.
Two 4-button “Icon” RF remotes. Door lock outputs (+/–). Starter-disable output. Flashing parking lights (built-in relay). Domelight supervision output. Dual-stage shock sensor (patented). 128dB Multi-tone siren and separate horn-honk output. 7-Function LED. Multi-function push button. 13 Programming functions.
Two on-board relays for disabling the starter, ignition, or fuel pump.
Installer test mode helps determine best position for the sensing coil.
Plug-in status LED included. No valet switch needed.
Two Touchkeys supplied with each unit. Handsomely crafted backlit
receptacle. Flashing status LED
indicates immobilizer armed, disarmed, code-learning mode, and valet override.
Ideal for vehicles with cloth or open tops, or open sunroofs.
Dual-stage protection --- Chirps siren if exterior zone violated (someone gets too close to car), triggers alarm if interior zone is violated (break-in or vandalism attempt).
Dual-stage protection --- Chirps siren if car lightly tapped, triggers alarm on break-in or vandalism attempts.
Includes remote microphone with 3ft cable for easy mounting and concealing inside the car.
Dual-stage protection --- Chirps siren on light tap of window, triggers alarm on break-in.
Compatible with most power-window systems. Works off momentary or constant ground trigger.
System override if ignition is turned on, doors unlocked, or any door opened.
Interfaces with all ENFORCER RF alarm systems. SR-5220A --- 2-Window module. SR-5440A --- 4-Window module.
Allows nearly any alarm to control nearly any type power-door lock/unlocks.
Includes two pre-wired, built-in, heavy-duty 30 Amp relays with protecting diodes and spike/noise suppressors.
X-187-037-1SC Relay
SPDT, 12V, 30A/40A heavy-duty automotive relay.
SS-066TL Pin Switch
European-style pin switch.
SS-061LSN Pin Switch
Patented heavy-duty long steel body with nylon fiberglass shaft and stainless steel contact terminal.
www.seco-larm.com
Immobilizers
Vehicle Security Systems Keyless Entry/Alarm Vehicle Accessories