Seams and stitches
-
Upload
kundan-ganvir -
Category
Technology
-
view
116 -
download
7
description
Transcript of Seams and stitches
Seams and Stitches
A seam is defined as a line over which two or
more fabrics are superimposed over each
other. A seam may also contain the row or
rows of stitching threads used to
superimpose the fabrics.
A stitch is how an interlacing threads move
over and between the two or more
superimposed fabrics, joining them. Stitch is
also applied at the edges of the fabric to
avoid unraveling of ends.
Submitted by
Kundan Ganvir
Roll no. M/MFM/12/15
MFM 2nd Semester
Seams and
Stitches -Types and
Classification
Seams- Classification
Super-imposed seams
Page no. 1
Lapped seams
Page no. 2
Bound seams
Page no. 3
Flat seams
Page no. 4
Decorative seams
Page no. 5
Edge neatening seams
Page no. 6
Super-Imposed Seams
Definition:
A category of seams in which two or
more piles of fabric are overlaid, one on
the top of other with raw edges aligned
and sewn together at the designated
distance from the raw edges, with one
or more rows of stitch.
Applications:
Side seams of skirt, in seams of jeans,
dress stacks, finishing belt ends,
attaching elastic to waistline, ends of
waist bands on jeans, collars or cuffs,
seamed and stitched.
1
Super imposed seam on denim sides
Super imposed seam on shirt sides
Lapped Seams
Definition:
A category of seams in which two or
more piles of fabric are overlapped with
raw edges exposed or the seam
allowance is folded under and stitched
with one or more rows of stitching.
Applications:
Main seaming of denim jackets, jeans,
and overalls. Fabrics that will not ravel,
unlined garments, side seams of shirts,
joining lace to another fabric, attaching
patch pockets, decorative finish
2
Lapped seam with single stitch line
Lapped seam with double stitch line
Bound Seam
Definition:
A bound seam class is formed by sewing
one piece of fabric or binding as it
encompasses the edge of one or more
pieces of fabric.
Applications:
Finishing necklines, sleeves hems, inside
waistbands of trousers and pants,
finishing seams on unlined jackets and
coats, adding interest as a design or
decorative detail, finishing raw edges,
continuing the motif design of lace.
3
Bound seam with single stitch line
Bound seam at neck line
Flat Seam
Definition:
A flat seam is constructed by having two
pieces of fabric meet precisely at their
edges. A cover stitch is used to sew the
two pieces of fabric together. This stitch
has multiple needles and creates a stitch
perpendicular to the seam line.
Applications:
Close fitting garments where the seam
allowance may put pressure on the
body, high-stretch fabrics, athletic
apparel, shape wear, undergarments,
and swimwear.
4
Flat seam with single stitch line
Flat seam on baseball ball
Decorative Seam
Definition:
This seam is made using machines with
zigzag capability. The zigzag stitch
length (coverage) must be adjusted to
accommodate and prevent fabric from
raveling. The more the fabric ravels, the
closer together the stitches need to be
(tighter or shorter stitch length).
Applications:
Adding a design detail, cording, piping,
tucking, welting, box or inverted
pleating, decorative stitching, etc.
5
Ornamental seam with beads
between fabrics
Decorative seam on hand bags
Edge Neatening Seam
Definition:
A category of seam constructed with one or two
plies of fabric used to finish the edge of a
garment or item. There are three finishing types
within the classification.
1. Secures a folded edge to the shell fabric by
stitching, either on the face or back.
2. Stitching is used at the edge or to cover the
raw edges, and may or may not be folded.
3. Applies a binding on a single ply of a seam
allowance to finish raw edges.
Applications:
Bottom and side hems of shirts, trousers, raw
edges of apparels, etc.
6
Edge finishing on raw edges of
trousers
Edge neatening seam on
handkerchief
Stitches- Classification
Class 100
Chain Stitches
Page no. 8
Class 200
Hand Stitches
Page no. 9
Class 300
Lock Stitches
Page no. 10
Class 400
Multi Thread Chain Stitches
Page no. 11
Class 500
Over Edge Stitches
Page no. 12
Class 600
Covering Chain Stitches
Page no. 13
7
Class 100- Chain Stitches
Chain stitches are produced by one or more needle
threads and are characterized by interloping.
One needle thread is passed through the fabric, form
needle loop and is secured by the next loop formed by the same thread.
Chain stitch is elastic and thicker than lockstitch and can easily be ravelled,
Particular care is required to prevent runback from the
last stitch,
Used for temporary stitching or for Blind stitching
Applications:
Hemming, Belt Loops, Padding Operations & Felling.
Types of Chain Stitches:
Type 101, 103 and 104
Type 101-
Formed with only one thread introduced from one side of material only.
Type 103-
Formed with one thread and a curved
needle which passes from left to right,
entering and exiting from same side of
material carrying a needle thread which is
intercepted by a blind looper.
8
Class 200- Hand Stitches
This type is originated from hand stitches. It is
produced from a single thread. This thread is
passed through the fabric from one side to
another and the stitch is secured by the single line
of thread passing in and out of the garment.
Applications:
Stitching of costly dresses, jackets, sample
garments, etc
Types of Hand Stitches:
Running Basting: Temporary and decorative purposes.
Back stitch: Used whenever strength is important.
Diagonal Basting: Useful for slippery fabrics.
Buttonhole stitch: Decorative of functional depending on closeness of stitch.
9
Class 300- Lock Stitches
This type of stitches is produced with two or more
groups of threads. Here the two threads are joined by
interlacing. Loops of one group are passed through the
material and are secured by the thread of second
group. One group is referred as needle thread and other
as bobbin thread. This stitch has enough strength and
same appearance on both sides.
Applications:
Underwear, most types of apparels, decorative purposes.
Types of Lock Stitches:
Type 301, 304, 308 and 309
Type 301-
Two threads, one needle and other bobbin
thread. Loop of needle thread passes through material and interlaced with bobbin thread.
Type 304-
The construction is similar to type 301, but the
needle bar moves as the material is fed giving a zigzag stitch.
Type 308-
Double step zigzag lockstitch.
10
Class 400-Multi thread chain stitch
This class is formed with two or more groups of
threads. Loops of one group of thread are passed
through the material and are secured by
interlacing and interloping with loops of another
group. Here on group is called needle thread and
another group looper thread. It has an appearance
of lock stitch on the top but has a double chain
effect formed by a looper thread on the under-side.
Applications:
Used for setting elastic in waist bands, decorative stitching on belts.
Types of Multi thread chain stitches:
Type 401, 404 and 406.
Type 401-
Loops of needle thread are passed through
materials and interlaced with loops of
bobbin thread. These interloping are drawn up against underside of material.
Type 402-
Zigzag chain stitch, construction is same as
type 401, but needle bed moves as material is fed.
Type 406-
Two needle threads interlace with one
bobbin tread, which are then drawn up
underside of material.
11
Class 500-Over-edge chain stitch
The stitch type in this class is formed with one or more
groups of threads. Here at least one group of thread
passes around the edge of material. So no thread from
the fabric can come out. The most frequently used
stitch of this type have one or two needle threads and
one or two looper threads and thus forms a narrow
band of stitching along the edge of the fabric.
Applications:
Edge neatening of knitted fabrics, where extensibility
of stitches in important. Polo tees, sports wear, dance wear garments.
Types of Over Edge chain Stitches:
Type 503, 504, 512.
Type 503-
Two threads, needle thread passes through
material and is brought to edge where it is
interlaced with bobbin threads. Edge of fabric is sealed.
Type 504-
Three threads, one needle and two lower
bobbin threads. Needle thread interloops with
one bobbin thread, then the first bobbin thread loop is interlaced with second bobbin thread.
Type 504-
Four thread over edge chain stitch.
12
Class 600-Over-edge chain stitch
This type of stitches is generally produced with three
groups of threads. Threads of two groups can be seen
from either side. The first group of thread is called
needle thread, second is called top cover thread and the
third is called bottom cover thread. The stitches of this
class are very complex and up to 9 threads can be used
in producing these stitches.
Applications:
Knits, Lingerie, binding elastics, decoration, etc.
Types of Over-Edge Chain Stitches:
Type 602, 605, 607
Type 602-
Formed with four threads, two needle threads,
one bobbin and one cover threads. Needle
threads are passed through loops of covering
threads on material surface and interlace
with bobbin thread at underside of material.
Type 605-
Five threads, three needle, one covering and
one bobbin threads. Construction is same as type 602.
Type 607-
Six threads, four needle threads, one covering
thread and one bobbin thread. Construction is
same as 602 and 605.
13