SDS SFT HRC-80 Jul 16
Click here to load reader
-
Upload
rees-westley -
Category
Documents
-
view
10 -
download
4
Transcript of SDS SFT HRC-80 Jul 16
![Page 1: SDS SFT HRC-80 Jul 16](https://reader038.fdocuments.us/reader038/viewer/2022100723/58f0ed201a28ab5c498b45b9/html5/thumbnails/1.jpg)
SFTSERIES
HRC-80Hydrocarbon & Sediment
Cartridge FilterTransformer Secondary Containment
Water remedial cartridge with smart polymer technologyHydrocarbons captured & encapsulated in the smart polymer media Prevents hydrocarbons/sediment from leaving the containment areaFlow rate from 6 to 80 litre / minuteAutomatic system shut down at oil saturation point Easy clean out & low maintenance
HRC cartridges are designed to remove hydrocarbons & sediment
contaminants from groundwater accumulation in liquid transformer secondary containment systems.
Dielectric fluids are absorbed by the smart filtration technology which bond with the hydrocarbon molecules to efficiently encapsulate and solidify hydrocarbons internally in the cartridge and remove the hydrocarbons from the groundwater, filtered groundwater passes unimpeded through the filter. The discharged water conforms to the EA PPG3 guidelines for discharge to surface drains and water environment, achieving a discharge concentration of <5mg/litre of oil under standard test conditions.
When the HRC filters start to reach their hydrocarbon absorption capacity the flow of groundwater will become increasingly restricted until the cartridge automatically shut-down and therefore prevent any polluted groundwater from leaving the containment area or entering the filter ensuring that no contaminates are introduced in to the environment.
The hydrocarbons and sediment filters are conveniently enclosed within one cartridge body eliminating the need for two individual filters (hydrocarbon & sediment) to be
connected in series. The sediment filter is easily accessed for inspection and cleaned by backflushing the cartridge from the discharge side of the cartridge with clean water.
![Page 2: SDS SFT HRC-80 Jul 16](https://reader038.fdocuments.us/reader038/viewer/2022100723/58f0ed201a28ab5c498b45b9/html5/thumbnails/2.jpg)
SFTSERIES
HRC-80Specification & Technical
Data
The Stables Gattinetts Hadleigh Road East Bergholt Colchester Essex CO7 6QTe: [email protected] t: +44 (0)1206 299388 w: capturegreen.com
Code DescriptionFlow Rate
(litre/min)
Hydrocarbon
Capacity (litre)
Sediment Filter
Size (µm)
Pressure
(bar/psi)
HRC-01 T1.5 T1 HRC Type 1T 6.0* 1.0 150 1 / 14.5
HRC-03 T2.0 T2 HRC Type 2T 15.0* 3.1 150 1 / 14.5
HRC-03 F2.0 T2 HRC Type 2F 15.0* 3.1 150 1 / 14.5
HRF-16 T4.0 T3 HRC Type 3T 80.0** 16.0 150 1 / 14.5
HRF-16 C4.0 T3 HRC Type 3T 80.0** 16.0 150 1 / 14.5
Code Description FittingLength
(mm/inch)
Diameter
(mm/inch)
Weight
(kg/lbs)
HRC-01 T1.5 T1 HRC Type 1T 1½” BSP thread 405 / 15.9 100 / 3.94 1.4 / 3.0
HRC-03 T2.0 T2 HRC Type 2T 2” BSP thread 647 / 25.5 114 / 4.5 3.2 / 7.1
HRC-03 F2.0 T2 HRC Type 2F 228 OD flange 400 / 15.7 228 / 9.0 3.3 / 7.3
HRF-16 T4.0 T3 HRC Type 3T 4” BSP thread 520 / 20.5 255 / 10.0 9.7 / 21.4
HRF-16 C4.0 T3 HRC Type 3T 4” Camlock 593.4 / 23.4 284 / 11.18 9.3 / 20.5
Code Description FittingLength
(mm/inch)
Depth
(mm/inch)
WFA-CF T1.5 T1 1.5” Wall fitting assembly & isolation valve 165 OD flange 432 / 17.0 245 / 9.7
WFA-CF T2.0 T2 2” Wall fitting assembly & isolation valve 165 OD flange 432 / 17.0 245 / 9.7
Notes: * test result at 150mm.
** test result at 50mm.Capture Green reserves the right to change or update, without notice, any technical
information contained in this datasheet. Capture Green also reserves the right, without notice, to change the design or construction of the product and to discontinue
SDS: SFT HRC-80 July 16
Sediment TrapThe filter can be easily
emptied & flushed out during maintenance.
Smart Polymer MediaThe polymer encapsulates & solidifies
the hydrocarbons to prevent their passing.
Filter Discharge PortalHydrocarbon presence <5ppm
Sediment particles ≤150µm
Filter EntryPortal