SDS Hammers and Breakers Try these The fastest 2 kilo for...
2
For all professional blue power tools when registered within 4 weeks of purchase at www.boschpowertools.co.uk SSP = Suggested Selling Price SDS Hammers and Breakers The fastest 2 kilo on the market Fastest on the market. There is no better way to describe the drilling rate of the GBH 2-26. In the under 3kg class it leaves the competition behind whatever the drill bit diameter. Maximum transfer of energy from striker to drill bit, improved guidance of striker, striking pin and drill bit and thus impact transmission with less energy loss. Result: better drilling progress and less wear = longer service life. Striking pin Improved guidance and convex tip Striker Optimised geometry reduces friction and improves alignment Improved Cooling More power efficient fan improves cooling and gives greater power transfer for drilling and chiselling Rotating Brush Plate Offers maximum power in forward and reverse with longer brush life SDS-Plus Toolholder Longer drive spiggots for longer life and better alignment 50mm Collar (Standard 43mm) More rigid Hammer Tube Tougher Drive Train Reinforced armature spindle and more gear teeth – Less wear and longer life New Bosch Sealing System Prevents dust penetration and grease leakage in two important areas: Conical Seal at the striker pin. Movement and temperature tolerant housing gasket Performance index for drilling rate in concrete (B 25,14 mm). Bosch GBH 2-26 DRE 100% Competitor 1 84% Competitor 2 81% Competitor 3 66% By far the best in its class. Tested by SLG Pruf-und Zertifizierungs GmbH, January 2004. 68 | BluePrint Q2 | April – June 2009 ibemo Kazakhstan - 09302 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: [email protected]
Transcript of SDS Hammers and Breakers Try these The fastest 2 kilo for...
SDS Hammers and Breakers
Try these for size10.8 V PowerKit
For all professional blue power tools when registered within 4 weeks of purchase at www.boschpowertools.co.uk
SSP = Suggested Selling Price
SDS Hammers and Breakers
The fastest 2 kilo on the market
Fastest on the market. There is no better way to describe the drilling
rate of the GBH 2-26. In the under 3kg class
it leaves the competition behind whatever
the drill bit diameter. Maximum transfer
of energy from striker to drill bit, improved
guidance of striker, striking pin and drill
bit and thus impact transmission with less
energy loss.
Result: better drilling progress and less wear = longer service life.
Striking pinImproved guidance and convex tip
StrikerOptimised geometry reduces friction and improves alignment
Improved CoolingMore power efficient fan improves cooling and gives greater power transfer for drilling and chiselling
Rotating Brush Plate Offers maximum power in forward and reverse with longer brush life
SDS-Plus ToolholderLonger drive spiggots for longer life and better alignment
50mm Collar(Standard 43mm) More rigid Hammer Tube
Tougher Drive TrainReinforced armature spindle and more gear teeth – Less wear and longer life
New Bosch Sealing SystemPrevents dust penetration and grease leakage in two important areas: Conical Seal at the striker pin. Movement and temperature tolerant housing gasket
Performance index for drilling rate in concrete (B 25,14 mm).
Bosch GBH 2-26 DRE 100%
Competitor 1 84%
Competitor 2 81%
Competitor 3 66%
By far the best in its class. Tested by SLG Pruf-und Zertifizierungs GmbH, January 2004.
68 | BluePrint Q2 | April – June 2009ibemo Kazakhstan - 09302 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: [email protected]
SDS Hammers and Breakers
Try these for size10.8 V PowerKit
For all professional blue power tools when registered within 4 weeks of purchase at
www.boschpowertools.co.uk
SDS Hammers and Breakers
2 kilo SDS-Plus Rotary Hammers
SSP = Suggested Selling Price
GBH 2-18 RE Professional GBH 2-23 RE Professional
GBH 2-26 DRE Professional GBH 2-26 DFR Professional
Specification GBH 2-18 RE GBH 2-23 RE GBH 2-23 REA GBH 2-26 DRE GBH 2-26 DFRPower Input 550W 650W 650W 800W 800WNo Load Speed 0-1550rpm 0-1000rpm 0-1000rpm 0-900rpm 0-900rpmImpact Rate/Force 0-4500/1.7J 0-4400/2.5J 0-4400/2.5J 0-4400/3J 0-4400/3J Weight 2.0kg 2.5kg 2.5kg/3.5kg with dust box 2.7kg 2.9kgDrilling Capacity 4-18mm 4-23mm 4-23mm 4-26mm 4-26mmConcrete – 68mm cores 68mm cores 68mm cores 68mm coresChiselling – – – 3 3Comes with: – – Dust extraction unit – SDS-plus quick change chuck
New! GBH 2-23 REA Professional
Dust Extraction SystemCapacity: e.g. 6 × 30mm holes 100 holesSuction Power 450 litres/minBit Capacity Range 4 to 16mmMax Drilling Depth 100mmPower Source Motor of machineConnection to a vacuum cleaner Yes
The most compact dust extraction hammer available; health & safety innovation from Bosch.
April – June 2009 | BluePrint Q2 | 69
See page 36 for BluePrint Deal
ibemo Kazakhstan - 09302 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: [email protected]
