SD-RE/Remote Fader · The dimmensions of the Remote Fader shall be: 476.8 (w) x 346.4 (d) x 109.5...
Transcript of SD-RE/Remote Fader · The dimmensions of the Remote Fader shall be: 476.8 (w) x 346.4 (d) x 109.5...
OVERVIEWThe DiGiCo SD-RE is a redundant engine for a DiGiCo SD10. It is accompanied by the SD Remote Fader which provides one bank of faders and next and previous snapshot buttons. It provides full engine redundancy like seen in the SD7.
DiGiCo SD-Range
The SD-Range caters for everything audio: be it the biggest rock and roll show on the planet, a crucial global broadcast, the most sizeable House of Worship application, or an intimate theatre performance, there is an SD console that will tick the box. Powerful. Versatile. Smart. Desirable.
DATASHEET
1www.digico.biz DiGiCo SD-RE/Remote Fader Datasheet
SD-RE/Remote FaderRedundant engine for a DiGiCo SD10 console
KEY FEATURES
Redundant engine for an SD10 console
144 Input Channels with full processing
64 Aux/Sub-Group busses with full processing
24 x 24 Matrix with full processing
Redundant PSUs as standard
Theatre software option
Broadcast software option
3U Rackmount unit
Remote Fader for external control over levels and snapshot firing
2 www.digico.biz
WORKSURFACE
1 x USB 2.0 slot
TECHNICAL SPECIFICATIONS
REAR
2 x Redundant PSUs
1 x SD Remote Fader port
1 x PS/2 Keyboard port
1 x PS/2 Mouse port
1 x Waves port (Optional)
1 x GPI DSub37 (16 inputs)
1 x GPO DSub37 (16 outputs)
1 x MIDI In/Thru/Out (5 pin DIN)
1 x Word Clock I/O BNC
2 x Redundant MADI BNC I/O
1 x VGA Port - DB-15 Mini-Female (1024 x 768 Resolution)
1 x Ethernet port
2 x USB 2.0 slots
1 x MultiMode Optocore Interface as standard
1 x XLR AES Sync I/O
SIGNAL PROCESSING
144 Input Channels (Mono) • Main & Alternative input• Analogue Gain• Phase Inversion Control• Gain Tracking• Digital Trim (-40dB to +40dB)• Variable Delay (0ms to 1.3s)• DiGiTube• HPF/LPF (-24dB/Oct)• 4 Band Parametric EQ / Dynamic EQ• DYN 1: Compressor, Multiband Compressor, Desser• DYN 2: Gate, Duck, External Input Compressor• EQ/Dyn Order Control• 2 Insert Points per Channel• Channel Mute & Hard Mute• Channel Direct Outputs
64 Aux/Sub-Group Busses • Phase Inversion Control• Digital Trim (-40dB to +40dB)• Variable Delay (0ms to 1.3s)• DiGiTube• Merge Input• Tone Generator• HPF/LPF (-24dB/Oct)• 8 Band EQ: 4 Band Parametric EQ and 4 Band
Parametric or Dynamic EQ• DYN 1: Compressor, Multiband Compressor, Desser• DYN 2: Gate, Duck, External Input Compressor• EQ/Dyn Order Control• 2 Insert Points per Channel• Channel Mute & Hard Mute
1 LR/LCR/LCRS/5.1 Master Buss (with full processing)
24 input x 24 output Full Processing Matrix
24 Control Groups (CGs)
2 Solo Busses
24 x 32-band GEQs
24 x Internal Stereo FX Processors• Delays • Audio Enhancer• Choruses• Pitch Shifters• Reverbs
DiGiTubes available on every channel and Buss
Dynamic EQs available on every channel and Buss
Multiband Compressors available on every channel & Buss
Virtual Soundcheck
OPTIONS
Waves SoundGrid Interface
Optocore Interface (HMA, OpticalCon, or ST connectivity)
Upgrade to SingleMode Optocore
Theatre Software
Broadcast Software
AUDIO SPECIFICATIONS
Sample Rate: 48kHz or 96kHz
Procesing Delay: 2ms Typical @ 48K (48 Stereo Channels, Stage input Through L-R Buss to Stage Output) 1.1ms @ 96k
Internal Processing: Up to 40-bit, Floating Point
3DiGiCo SD-RE/Remote Fader Datasheet
The DiGiCo SD-RE shall be a redundant engine for mirroring with an SD10. It shall be accompanied by the SD Remote Fader, which shall provide one bank of 12 faders and snapshot next and previous buttons.
Once connected to a DiGiCo SD10 console via a crossover ethernet cable and connected to the audio racks with the desired format, the SD-RE shall provide full engine redundancy like seen in the DiGiCo SD7.
The engine shall be capable of 144 input channels, 64 Aux/Sub-group Busses, a LR/LCR/LCRS/5.1 Master Buss, 24 VCA style or mute group style Control Group channels, 2 Solo Busses, and a 24 input x 24 output full processing Matrix. All processing paths shall have full processing including Tube emulation, Dynamic EQ and Multiband Compression. Tube emulation, Dynamic EQ and Multiband Compression shall be available on every channel and Buss on the console. All processing shall be internal and FPGA-Based. An internal FX rack with 24 stereo slots shall allow users to pick from 34 different FX. An internal set of 24 32-band GEQs shall also be accessible.
The front of the unit shall have a USB port. The rear of the unit shall have two sets of redundant MADI I/O for connections to MADI devices and shall come with MultiMode Optocore as standard, providing 504 additional audio paths at 48kHz and 96kHz. The Optocore connector type shall be chosen from HMA, OpticalCon or ST. It shall also have external Wordclock I/O, 1 DSub37 GPI, 1 DSub37 GPO, MIDI In, Thru and Out, AES sync I/O, 2 USB ports and 2 redundant PSUs. It shall also have a VGA port for connecting an external screen, an ethernet port for connecting to an SD10, a PS/2 port for a keyboard, a PS/2 port for a mouse and a serial connector for connecting to a Remote Fader.
There shall be a Waves SoundGrid option providing 64 inputs and 64 outputs to the SoundGrid Network at 48kHz and 96kHz. There shall also be an option to upgrade the Optocore interface to SingleMode.
There shall be a Theatre Software option that shall provide Auto Update, Aliases, Players, Advanced CG programming tools and Matrix nodal delays.
There shall also be a Broadcast Software option available that shall provide a Monitor Matrix, Backstop PFL and Mix Minus Busses.
The dimensions of the SD-RE shall be: 483 (w) x 462.5 (d) x 132.5 (h) mmThe weight of the SD10 shall be: 10kg
The dimmensions of the Remote Fader shall be: 476.8 (w) x 346.4 (d) x 109.5 (h) mmThe weight of the Remote Fader shall be: 4.9kg
In a world as competitive for engineers as it is for console owners, you want the best tools you can lay your hands on. You also want a console and audio tools as well thought out for every major application as they are designed for the art and science of sound engineering.
A&E SPECIFICATION
PACK INCLUDES
SD-RE Remote Engine
Remote Fader
Keyboard/Mouse
Serial Cable
www.digico.biz
DiGiCo HQUnit 10 Silverglade Business Park Leatherhead Road, Chessington, Surrey, KT9 2QL, United [email protected]
©DiGiCo 2020. All brand and product names are copyright to their respective ownersE&OE
4www.digico.biz DiGiCo SD-RE/Remote Fader Datasheet
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
A A
B B
C C
D D
E E
F F
G G
H H
I I
J J
K K
L L
FRM- SD- RE- HMA/NC/ST 3ddraw
115- 00070.iam
SD- RE RACK
1DRAWING NUMBER:
SHEET
DWG FILE NUMBER:
DIMENSIONTOLERANCES UNLESS STATED
ONE DECIMAL +-0.20
DRAWN BY:
ANGULAR +-30'
HOLESUP TO DIA 6 +0.1-0DIA 6 TO 12 +0.2-0
DIA 12 TO 24 +0.3-0ABOVE DIA 24 AS STATED
© 2017 DiGiCo
UNLESS STATED DIMENSIONS IN MILLIMETERS
DiGiCo STOCK NUMBER:
PRODUCT:
COPYRIGHT. THIS DRAWING IS THE PROPERTY OF DIGICO (UK) LTD. THE INFORMATION IS CONFIDENTIAL & MAY NOT BE USED WITHOUT PRIOR WRITTEN CONSENT OF DIGICO (UK) LTD. THE CONTENTS DETAILED ARE CORRECT AT THE TIME OF PUBLICATION AND AS AN INNOVATIVE DESIGN MANUFACTURER DiGiCo UK Ltd. RESERVES THE RIGHT TO MAKE CHANGES WITHOUT NOTICE IN COLOURS MATERIALS SPECIFICATION AND MODELS.DIGICO AND SOUNDTRACS ARE REGISTERED TRADEMARKS.
TITLE:
SCALE:FIRST USED ON:
CHECKED:
DATE:
DATE:
SIZE SUFFIX
TWO DECIMAL +-0.10
INSPECTIONSTATUS:
IDENT NUMBER ISSUE
NO DECIMAL +-0.50
115- 00070
22/ 05/ 2014
SD- RE
PRODUCTION
OUTLINE DRAWING
1 A0REMOVE ALL BURRS AND SHARP EDGES
PART NUMBER:115- 00070
THE QUEENS AWARDSFOR ENTERPRISE
INTERNATIONAL TRADE2011
DEVELOPMENT CODE:
®
D i G iC o S O L U T I O N SS O U N D T R A C S D i G iG r i d
®®
PART INTERFACES WITH:
EST MASS:
DESIGN STATEReleased
MFG. APP. BY MFG. APP. DATE
N/ A
OL1 : 1
NA
NA
115- 00073
ANGEL FISH
SUBJECTDIGICO ASSY
ENG. APP. BY ENG. APP. DATE
CATEGORY
LIMITS APPLY AFTER FINISHING, UNLESS STATED OTHERWISEMACHINED WHERE MARKED THUS:
IF IN DOUBT ASK!DO NOT SCALE
WEB LINK
®email: [email protected]. web site: www.digiconsoles.biz
3rd
REAR VIEW
REVISION HISTORYZONE REV DESCRIPTION DATE APPROVED
A NEW DRAWING 04/ 11/ 2014 1 UPDATE ASSEMBLY 09/08/ 2016
420m
m (1
6.54
”)
483mm (19.02”)
132.
5mm
(5.2
2”)
42.5
mm
(1.
67”)
LINE DRAWINGAll dimensions in mm
PHYSICAL
SD-RE
Dimensions: 483mm (w) x 462.5mm (d) x 132.5mm (h)
Weight: 10.15kg
Power Requirements: 90-264 VAC, 47-63Hz. 230 VAC max. 0.75A max.
Redundancy: Internal PSU x 2
Remote Fader
Dimensions: 476.8mm (w) x 346.4mm (d) x 109.5mm (h)
Weight: 4.9kg
Power Requirements: 100-240 VAC, 0.8A, 50/60Hz
Product Code: X-SD-RE-OPTO (HMA optics)
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
A A
B B
C C
D D
E E
F F
G G
H H
I I
J J
K K
L L
FRM- SD- RE- HMA/NC/ST 3ddraw
115- 00070.iam
SD- RE RACK
1DRAWING NUMBER:
SHEET
DWG FILE NUMBER:
DIMENSIONTOLERANCES UNLESS STATED
ONE DECIMAL +-0.20
DRAWN BY:
ANGULAR +-30'
HOLESUP TO DIA 6 +0.1-0DIA 6 TO 12 +0.2-0
DIA 12 TO 24 +0.3-0ABOVE DIA 24 AS STATED
© 2017 DiGiCo
UNLESS STATED DIMENSIONS IN MILLIMETERS
DiGiCo STOCK NUMBER:
PRODUCT:
COPYRIGHT. THIS DRAWING IS THE PROPERTY OF DIGICO (UK) LTD. THE INFORMATION IS CONFIDENTIAL & MAY NOT BE USED WITHOUT PRIOR WRITTEN CONSENT OF DIGICO (UK) LTD. THE CONTENTS DETAILED ARE CORRECT AT THE TIME OF PUBLICATION AND AS AN INNOVATIVE DESIGN MANUFACTURER DiGiCo UK Ltd. RESERVES THE RIGHT TO MAKE CHANGES WITHOUT NOTICE IN COLOURS MATERIALS SPECIFICATION AND MODELS.DIGICO AND SOUNDTRACS ARE REGISTERED TRADEMARKS.
TITLE:
SCALE:FIRST USED ON:
CHECKED:
DATE:
DATE:
SIZE SUFFIX
TWO DECIMAL +-0.10
INSPECTIONSTATUS:
IDENT NUMBER ISSUE
NO DECIMAL +-0.50
115- 00070
22/ 05/ 2014
SD- RE
PRODUCTION
OUTLINE DRAWING
1 A0REMOVE ALL BURRS AND SHARP EDGES
PART NUMBER:115- 00070
THE QUEENS AWARDSFOR ENTERPRISE
INTERNATIONAL TRADE2011
DEVELOPMENT CODE:
®
D i G iC o S O L U T I O N SS O U N D T R A C S D i G iG r i d
®®
PART INTERFACES WITH:
EST MASS:
DESIGN STATEReleased
MFG. APP. BY MFG. APP. DATE
N/ A
OL1 : 1
NA
NA
115- 00073
ANGEL FISH
SUBJECTDIGICO ASSY
ENG. APP. BY ENG. APP. DATE
CATEGORY
LIMITS APPLY AFTER FINISHING, UNLESS STATED OTHERWISEMACHINED WHERE MARKED THUS:
IF IN DOUBT ASK!DO NOT SCALE
WEB LINK
®email: [email protected]. web site: www.digiconsoles.biz
3rd
REAR VIEW
REVISION HISTORYZONE REV DESCRIPTION DATE APPROVED
A NEW DRAWING 04/ 11/ 2014 1 UPDATE ASSEMBLY 09/08/ 2016
420m
m (1
6.54
”)
483mm (19.02”)
132.
5mm
(5.2
2”)
42.5
mm
(1.
67”)
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
A A
B B
C C
D D
E E
F F
G G
H H
I I
J J
K K
L L
FRM- SD- FADER 3ddraw
115- 00073.iam
FADER REMOTE MAIN ASSY
1DRAWING NUMBER:
SHEET
DWG FILE NUMBER:
DIMENSIONTOLERANCES UNLESS STATED
ONE DECIMAL +-0.20
DRAWN BY:
ANGULAR +-30'
HOLESUP TO DIA 6 +0.1-0DIA 6 TO 12 +0.2-0
DIA 12 TO 24 +0.3-0ABOVE DIA 24 AS STATED
© 2017 DiGiCo
UNLESS STATED DIMENSIONS IN MILLIMETERS
DiGiCo STOCK NUMBER:
PRODUCT:
COPYRIGHT. THIS DRAWING IS THE PROPERTY OF DIGICO (UK) LTD. THE INFORMATION IS CONFIDENTIAL & MAY NOT BE USED WITHOUT PRIOR WRITTEN CONSENT OF DIGICO (UK) LTD. THE CONTENTS DETAILED ARE CORRECT AT THE TIME OF PUBLICATION AND AS AN INNOVATIVE DESIGN MANUFACTURER DiGiCo UK Ltd. RESERVES THE RIGHT TO MAKE CHANGES WITHOUT NOTICE IN COLOURS MATERIALS SPECIFICATION AND MODELS.DIGICO AND SOUNDTRACS ARE REGISTERED TRADEMARKS.
TITLE:
SCALE:FIRST USED ON:
CHECKED:
DATE:
DATE:
SIZE SUFFIX
TWO DECIMAL +-0.10
INSPECTIONSTATUS:
IDENT NUMBER ISSUE
NO DECIMAL +-0.50
188- 00062
19/ 08/ 2014
SD- RE
PRODUCTION
OUTLINE DRAWING
1 A0REMOVE ALL BURRS AND SHARP EDGES
PART NUMBER:115- 00073
THE QUEENS AWARDSFOR ENTERPRISE
INTERNATIONAL TRADE2011
DEVELOPMENT CODE:
®
D i G iC o S O L U T I O N SS O U N D T R A C S D i G iG r i d
®®
PART INTERFACES WITH:
EST MASS:
DESIGN STATEReleased
MFG. APP. BY MFG. APP. DATE
N/ A
OL1 : 1
NA
NA
115- 00070
ANGEL FISH
SUBJECTMAIN ASSEMBLY
ENG. APP. BY ENG. APP. DATE
CATEGORY
LIMITS APPLY AFTER FINISHING, UNLESS STATED OTHERWISEMACHINED WHERE MARKED THUS:
IF IN DOUBT ASK!DO NOT SCALE
WEB LINK
®email: [email protected]. web site: www.digiconsoles.biz
3rd
OUTLINE DRAWING NOTES1. THIS IS UNCONTROLLED DOCUMENT.2. DIMENSION CORRECT AT TIME OF PUBLICATION.3. GRAPHICAL DETAILS RERESENTIVE ONLY.
REVISION HISTORYZONE REV DESCRIPTION DATE APPROVED
1 NEW DRAWING 04/11/2014
REAR VIEW
309.
1mm
(12.
17”)
37.3
mm
(
1.47
”)
476.8mm (18.77”)
109.5mm
(4.31”)
5mm
(0.2”)
109.
5mm
(4.3
1”)
5mm
(0.2
”)