SD - eworldtrade.com · located at Silicon Valley of China-Zhongguancun Shangdi Information...
Transcript of SD - eworldtrade.com · located at Silicon Valley of China-Zhongguancun Shangdi Information...
SD.ID Add : Office 1111, Block D, Jiahua Plaza, 9 Shangdi 3rd Street, Haidian District, Beijing, China. (100085)
http ://www.sojoline.com Tel:010-62979948 Fax:8610-62988464
Product Catalogue
SD.ID
SD.ID
Tab I e of Contents
-------- Cable Sectionalising Cabinet
---------- Secondary Substation
--------Solid Insulated Switchgear
Ring Main Unit
-- Medium Voltage Switchgear & Switchboard
- Low Voltage Switchgear & Switchboard
---------Pole Mounted Switch
------ Prefabricated Substation
-- Power Distribution Automation Device
----- Medium-voltage Component
---------Fault Indicator
---------VT and CT
SOJO Factory of GIS
SOJO factory of substation & M/L voltage switchgears
Automation production line - the assembly area
Automation production line- the assembly area
SOJO factory of the Solid Insulated Switchgear
Automation production line - the assembly area
Automation production line - the assembly area
The automatic CNC sheetmetal fabrication center
Company Profile: Founded in December 2002, Beijing SOJO Electric Co., Ltd. is a joint-stock high-tech enterprise, whose registered capital is 276 million RMB. Currently there are more than 700 employees. The headquarter is located at Silicon Valley of China-Zhongguancun Shangdi Information Industry Zone, Beijing. SOJO is mainly engaged in the research, production, sales and export of power distribution equipment and automation equipment in the field of 35kV (or lower) power transmission and distribution networks.
In April, 2015, SOJO was officially listed in Shenzhen Stock Exchange (SZSE) (Stock Code: 300444; Stock name: SOJO Electric).
Through more than 12 years, SOJO constantly grows in strength; its products are applied in over 97% of provinces and municipalities of China, wining wide applause from users. In 2009 and 2010, 2-year continuous, SOJO has been named as "Top 12 Best Innovated SMEs in Z-Park" and 3-year continuous named as "Forbes China Best SMEs". SOJO is the first batch of domestic companies which independently research and produce compact switchgear, has nearly hundred products including switching station, ring main unit , sectionalising cabinet, overhead switchgear, medium and low voltage switchboard, intelligent switchgear, power distribution remote monitoring system, fault detection equipment, cable accessories and etc. The products such as switching station, ring main unit, cable distribution cabinet, secondary substation, pole mounted switch and etc. are intensively and stably used in the State Grid, China Southern Power Grid and their sub-companies of province levels or municipal levels, power plant, wind power industry, railway and aviation industry, petroleum and chemical industry, mining industry and other industries.
Since the establishment of SOJO Electric, it commits itself to research and develop green, clean energy and environmentally friendly products. In 2007, SOJO became the first Chinese company introducing solid Insulated metal enclosed switchgear, an exclusive patent possessed product, which broke the monopoly market status of SFs switchgear to realize the clean energy and environment protection of power distribution switches. The product has gained a series of international patents and four domestic patents, has been listed in the National Key New Product, Beijing Independent Innovation Product Category and "Beijing Torch Project" Key Promoting New Product Category, taking leading place of international and domestic markets.
The factory is located at Huairou Yanqi Economic Development Area. The land area of factory is 53360 sqm, the building area is 30800 sqm. SOJO's factories have advanced production equipments and testing equipments, such as Helium leak detector, salt spray chamber, current generator and etc. There are more than 100 technical engineers and relevant technical staffs, which form a young team with strength and potential providing high quality services in the power distribution industry.
SOJO's second phase factory had put into operation on Nov.11th, 2013 After it came into production, SOJO has the largest solid insulated switchgear manufacture base in China and the newly increased production value will be over 1 billion RMB.
In the future 3 to 5 years, SOJO will keep its steps in the production of power transmission and distribution equipments and control systems, focused on the market segment of switchgear which will be the direction of business development. Moreover, the high value-added products will take over 70% of SOJO's revenue. SOJO will try its best to become top 1 brand in domestic switchgear industry, so that to realize the SOJO's scenario "to be the first class equipment supplier in power transmission and distribution industry, lead the progress of domestic equipment industry, be responsible to the society and contribute to the people".
SOJO will keep the pace with the time, steadily step into the future!
Qualifications & Honours
KEMA=f(
ffff.~::::::
.~ ...... ~!::. ~ ... Ji. .. ::.
@ ··~:.·.:::.:.····
,., .... ~ ••11111••t.t••• ............ u .. ···~"
... ~ ~\!__)
a -~-
::.":.::-::.:::::·
.. :.·.~~:.~.
§' ·_·.c~·-4•.:'.:_<$°.• .. • f?0>, Bl ~ ~ - y ·_:~~~y
....... Ll :;:~ · ·~
Forlf~~ 2011 WAili
• l •l~iKJJ 6' ~
"""'" /'
.... ~m .... ~~
..... -~·~':.:- ...
:::::::~,".'\ ····- U \,__;
,-1 ~
il•lltlUUJ'Jlll:lll:k-ftnl e .tJ:U i .JOl~iJ
=~ - ttlB
l ~nl•ft : Jt.O:llld:Et.tl~R:& a.:tt•~lll •iiElf i'I: ;:QQ/\1'.+-11
liltlll ' "'"'
·-----L tJ J
~ ~ ~ *A~ ... ~~:~ ..... ~.~ 4li lit ll! ft ~ ~ m ';!; ~ m ';!;
--·---- .. --··- ~~~f:E::::: ..::::;;:::.,-·"' :::;:;p:;;r.:::
-·-...:::;;:.:....-=-·- --·
""'/"'
····~ ... ~
··-~ ... ~,,, .. ,....._ .. ... ....... -·-·-..... ·-·· .... ·•·
, .... ,, .... ,,.~
I
ll lni~~1~~~fifti1~~ 2 ooa'*' 11••"'-~IT!ll!
"P'~iJU~~-~
~ -~ lit Ill ft
-- -·
-<-•..U..
SD.ID
Research and Development Department
Technology Dep .i*ment
Quality Testing De ment e Chief Technology Officer
Chief Engineer
General Manager
• • Fact&y General Manager
• Chief Sales Supervisor
•
•
e Manager Representative
Marketing
Department
Chief Marketin Supervisor
Financial
Department
Sales Center
Production Department • Administration Department
Electronic Plant
Third Workshop
• • e Sales Department First Workshop
Second Workshop
Organisational Structure
. c ~ .. . 0 u u -~ 1-u w ..J w 0 ., 0 U1 ~ z -., -w m
SD.ID SD.ID
A bout···
Beijing SOJO Electric has always strived to continuous develop and improve our products. We are dedicated to provide our customer with products which are advanced, secured, flexible and easy to use. Beijing SOJO has an experienced and well-educated technical team, it also has advanced production facilities for automatic sheetmetal fabrications, cable accessory processing, automatic assembling in cooperating with storage and logistic systems, with support from our staffs, we can guarantee our outfactory products with reliable quality and on time delivery. Besides, we are also specialized in customizing .
H istory···
2003: Importing and distribution of SFs RMUs for Chinese domestic market 2004: First self-developed RMUs launched into market. 2005: Design and produce Substation, Medium /Low Voltage Switchgear, Pole mounted switch 2007: New factory launched for assembling, producing and testing solid insulated switchgears. 2013: Expanded automatic second-phase factory, introduce the second generation of Solid Insulated Switchgear. 2015: Company listed into stock market.
2003 2004
2005
E xcellent ...
Reliable
2007 2008
Solid Metal Enclosed
Insulated Switchgear Second Generation of
Solid Insulated Switchgear
All products designed and tested in accordance with latest international IEC standards and national GB standards. IS09001 :2008 quality management system. All low-voltage products passed China Compulsory Certification test
Environmentally Friendly When the SFs switchgear comes to the end of its service life, the SFs gas can be recycled The solid insulated switchgear abandoned the Fluorine-containing gas, it completely realizes the eco-friendly switchgear products All packing can be recycled IS014001: 2004 environmental management system certificate
Secured All design takes precedence to follow the principle of safety first. Locking, interlocking mechanisms are produced above or strictly as related standards required
Assurance Every equipment is tested through compression resistance test, leakage test, partial discharging test, and temperature rise test, all together more than 10 inspections Every equipment is kept with design, production and test records.
BEIJING SOJO ELECTRIC CO., LTD.
G reen···
Beijing SOJO has always paid attention to various influences
on our living environment caused by its products. It has been
striving to continuous development of the environmentally
friendly equipments which are high technology, clean and non
toxic.
The design was initially defined as green product which is
completely pollution free. It has been closely paid attention
to every single process of design, production, distribution,
recovery and disposal.
For every sold product, we follow the recovery protocol until its disposal.
Q uality···
Quality Assurance
Every SVI solid insulated switchgear is produced from
professional technical staffs and high precision equipment in
order to assure the product quality.
System Qualification Quality System Certificate: ISO 9001: 2008
Environmental System Certificate: ISO 14001: 2004
Occupation Health Safety Management System: OHSAS
18001:2007
Every department adopts ERP management system; strictly
stick to standard business processes.
All business, marketing, production, logistic and financial
department passed GB/T19001-2000-IS09001 :2000 standard.
All production and logistic testing system passed ISO
14001 :2004 standard.
Systemic Testing Every equipment is being systematic tested during production
and our factory to assure its quality including:
Corrosive salt water spraying test
Opening/Closing test
Power frequency withstand test
High/low temperature test (key components)
Overcurrent test
Partial discharge test (certain components)
Quality testing department is responsible for recording factory
routine test report of every semi-finished and finished product
and release qualification and routine test report
BEIJING SOJO ELECTRIC CO., LTD.
Ii
:t.••ll•'tfll••~'lll
V••Utt•U-U&oHH-·
tll:••·-···~'111 .... ••• u ..... - ........... ....
n•••-•w•t1• .,. ..... u ................ ,.. .....
••&I• .. ..,.._-~""" 'VM· N..,. UH-H•-.>IO&nll•"<H•H••Hoo•OU
··~ · Jt.#.1'
§ ..::~ .....
SD.ID • c ~ .. . 0 u u -~ I-u w ..J w 0 , 0 U1 l!J z -, -w m
Product Introduction
American Type Sectionalising Cabinet
Assembled American Type Sectionoalising Cabinet
630A T Type Cable Connector 630A T II Type Cable Connector
200A Elbow Type Cable Connector 200A Deadbreak Junction
A Sectionalising Cabinet
Sectionalising cabinet is applied at the cables jointing points for power distribution purpose. The connection method is simple, convenient, complete insulated, fully shielded, compact, light-weighted, oil free, maintenancefree, corrosion resistant, easy to be earthed, flexible to earth and nonexposed live parts. It provides solutions for cables' Tee connection and connections of multiple incoming and outgoing cables. It is applied for urban street, skyscraper buildings, construction sites, large enterprises, and other distribution networks, especially suitable for rebuilding of city's power distribution projects.
) ) ) ) ) American Type Sectionalising Cabinet
• Connection method
Deadbreakjunctions are mounted to cabinet and cable connectors connected
to deadbreakjunctions ..
• Model
DF D - D
I I
Current Level
~------ Total Number of Circuits
~. -------- Sectionalising Cabinet
• Technical Data
• Rated voltage
• Rated current
• Rated short-time withstand current
• 1 min power frequency withstand voltage
• Lightning impulse withstand voltage
• 15 min DC withstand voltage
• Degree of protection
• Product Features
• Fully shielded and insulated, safe and reliable.
12kV
630A
40kA
42kV
125kV
78kV
IP67
• Corrosion-resistant, maintenance-free, not affected by harsh ambient conditions.
• Maximum 8 number of incoming and outgoing circuits in one cabinet.
• Live plugging and unplugging under emergency.
• Small size, compact structure, easy to install, convenient to operate.
BEIJING SOJO ELECTRIC CO., LTD.
) ) ) ) ) European Type Sectionalising Cabinet
• Connection method
The cable connectors connected to feedthru junctions at front side and back side of the cabinet. Compared to American type cabinet, it is more compact and ensures a reasonable arrangement for the cable laying orders so as to eliminate the case of the cable frogging.
• Model
DFW-12 D D
I
I L Surge Arrestor
L_ Total number of circuits
~-------- European Type Sectionalising Cabinet
• Technical Data
• Rated Voltage 12kV
• Rated Current 630A
• Rated short-time withstand current 40kA
• 1 min power frequency withstand voltage 42kV
• Lightning impulse withstand voltage 125kV
• 15 min DC withstand voltage 78kV
• Degree of protection IP67
• Product Features
• Fully shielded and insulated.
• Corrosion-resistant, maintenance-free, not affected by
harsh ambient conditions.
• Reasonable layout, compact structure, and easy to install.
• Flexible to connect, convenient to expand.
BEIJING SOJO ELECTRIC CO., LTD.
SO.ID
European Type Sectionalising Cabinet
European Type Sectionalising Cabinet
630 Screened European Type
Cable Connector
Combination 1
200A Screened European Type
Cable Connector
Combination 2
........ Q) c:
..c ca
(.)
C> c: en ca c: 0 ts Q) en
I ~
f.
~
Ill • 9
r~ • . . .
Cable Sectionalising Switch
New Cable Sectionalising Switch
Outgoing Bushing - - -..., -t : • i' ...
~ 1,,
w JI
f ~ f ~ fil: ii! ~
t: t:
~
) ) ) ) ) Cable Sectionalising Switch
• Brief Introduction
The cable sectionalising switch is filled with SFs gas with load switch or circuit breaker in the sealed tank. This switch shares the characteristics of cable sectionalising cabinet as well as RMU. It operates at the front and has incoming and outgoing cables at lateral sides, cooperates with anti-explosion valve at back, which gurantees the safety of staffs and equipments.
• Model
DFK - DD
I '------ Cable Connection Method ~. ----- Switch Model
I European Type Cable Sectionalizing Switch
• Technical Data
• Rated voltage
• Rated current
• Rated short time withstand current
• 1 min power frequency withstand voltage
• Lightning Impulse withstand voltage
• Degree of protection
• Product Features
• Fully shielded and insulated; safe and reliable.
• Multiple connection methods, easy assembling.
• Compact, easy operation.
12kV 630A
20kA,4s 42kV 75kV IP67
• Isolating fault section, reducing power down affection area.
• Convenient to inspect and maintain the network.
BEIJING SOJO ELECTRIC CO., LTD.
Jillt.11m1;1.t.11m1.m1 ) ) ) ) ) LDF - 0.4 Low Voltage Sectionalising Cabinet
• Brief Introduction
LDF - 0.4 series low voltage sectionalising cabinet adopts composite
material for enclosure and busbar insulation material; the cabinet can
be freely configured under customers' requirements. It can be used as
switchboard, sectionaliser, metering box, control box, or power supply
box. The cabinet is compact, easily assembled; and all components are
shielded and insulated. Therefore, it is touchable and no hazardous of
discharging caused fire.
1. Composite material made enclosure,
Board structure, easily assembled, cost effective
The life expectancy of composite material made enclosure is expected to
be 8 to 10 times longer than traditional metal enclosure. The enclosure
is suitable for installation of different electrical components and meters.
The enclosure is no convex edge and be able to endure high impact
resistance. It is suitable for outdoor application.
2. Fuse Isolator
High breaking capacity BOkA, single pole live operation available, secure
and reliable
Modular structure, easy assembly, convenient operation
Except conductive material, all made of environmentally friendly material.
Easy to change the fuse current level(under maximum allowed current
level).
• Technical Data
• Standard
• Fuse in accordance with
• Application Type
• Rated short circuit protection
function (With fuse)
• Rated withstand voltage
• Rated busbar working current
• Rated branch Working current
BEIJING SOJO ELECTRIC CO., LTD.
IEC/EN 60 947 - 3
EN 60 947-3
AC 23B/400V AC 22B/500V
AC 21 B/690V AC 22B/400V
BOkA 400V
6kV
160, 250, 400,630,1250,1600A
100, 125, 160,250,400A
SD.ID
Stripe fuse and busbar system
Stripe fuse inside the SMC enclosure
Low voltage sectionalising cabinet
of the SMC enclosure
..........., Q) c:
..c ca
(...)
Cl c: en ca c: 0 ~ (.) Q)
en
Pad-mounted Secondary Substation -American type
Accessories of Secondary Substation
Operation Example
B Secondary Substation
) ) ) ) ) ZGS Pad-mounted Secondary Substation American Type
• Brief Introduction
For American type pad-mounted secondary substation, the transformer iron, winding, medium voltage load switch and fuse switch are all enclosed in one compartment. The advantage for this type of substation is very compact, simplified structure, easy assembling, flexible operation, which can be applied indoor or outdoor.
• Model
ZGSD D-0/D
•
•
Voltage Level
Rated Capacity
H(Ring Main Type), Z(Terminal Type) ~------ Design Code
~-------- Pad-Mounted Transformer
Technical Data
• Rated voltage 12/0.4 kV
• Rated capacity 100-1000kVA
• 1 min power frequency withstand voltage 35kV
• Lightning impulse withstand voltage 75kV
• Load switch rated current breaking times 200
• Mechanical life of load switch 2000
• Noise level S50dB
• Degree of protection IP43
Product Features
• Completely screened and insulated structure, small volume and compact
structure.
• Suitable for ring main and terminal power distribution networks.
• Double fuses protection.
• D, yn11 connection method, Non-neutral excursion.
BEIJING SOJO ELECTRIC CO., LTD.
) ) ) ) ) YB-12 Prefabricated Secondary Substation
• Brief Introduction
European type secondary substation integrates medium voltage switchgears, secondary transformer and low-voltage switchgears into a prefabricated housing.
• Model
YB 12/0.4 - D
I
I L_ Rated Capacity ~. ----- Rated Voltage Level
~--------- Prefabricated Substation
• Technical Data
• Rated voltage
• Rated capacity
• 1 min power frequency withstand voltage
• Lightning impulse withstand voltage
• Mechanical life of load switch
• Noise level
• Degree of protection
• Product Features
12/0.4 kV
50-1600kVA
Oil Transformer 35kV,
Dry Transformer 28kV
75kV
10000
50dB
IP3X
• Consisted by independent medium voltage compartment, transformer
compartment and low voltage compartment,
• Wide selections of medium voltage switchgears available for medium voltage
compartment, 5 interlocking protections
• Transformer can be oil or dry type
• Wide selections of low-voltage switchgears available for low voltage
compartment
BEIJING SOJO ELECTRIC CO., LTD.
SO.ID
Structure of Housing
Composite Material Housing
Stainless Steel Housing
Calcium Silicate Board
Feature Housing
'--ca Q) C>
..c::: (.) .....
·== en ""C Q) ..... ca ::J en c:
""C
0 en
c Solid Insulated Switchgear
) ) ) ) ) SVI Solid Insulated Metal Enclosed Switchgear
• A New Generation of Switchgear
SOJO commenced the research and development of non-gas MV switchgears in the year of 2005. Through marketing research and electrified analysis, it was discovered that solid insulation has a wider application as compared to the traditional SFs gas insulation, and the solid insulation technology is more stable than gas insulation under extreme circumstances. SOJO also discovered potential substitutes for insulation, such as the vacuum interrupter, and high-quality solid insulation materials. SOJO's first solid insulation application started in the year of 2007, and with the creation of SVI (Solid, Vacuum, Intelligent) Switchgear, it gained astounding performance records over the years, supporting key projects for utility companies, oil industries, railways, mining, and aviation industries. Striving for international markets, SOJO passed KEMA type test in 2012, complete type test certificate granted. The 2nd generation of SVI Switchgear was launched in November 2013, structurally customized and optimized for SOJO's '57' Express automated production line for greater accuracy and production volume. This new production line is able to produce 30,000 panels a year, allows a margin error of only 0.5mm, and has a shorter assembly time of only 7 minutes. The 24kV SVI Switchgear was also introduced in the same year, increasing variety and flexibility for consumers. In the year of 2015, SOJO launched 36kV SVI switchgear further complete the product line of solid insulated switchgears.
• Product Application Advantages
• Suitable for low temperature The design of solid insulated switchgear reduce the dependence on SFs gas which eliminates the potential problem caused by insulation gas being liquefied under low temperature.
• Suitable for coastal and desert application Reinforced protection for long-term application without being easily affected by ambient pollution.
• Suitable for application in vault installation with people working there Eliminates the hazard of leaked SFs being deposited in the vault area which is life threatening for people working there who can be suffocated by gas which is heavier than air.
• Suitable for anti-explosion installation Each phase is embedded in epoxy resin cast separately, there is no harzard of phase to pase discharging which can cause explosion.
• Suitable for frequent switching operations Switch operations for solid dielectric designed switchgear are more than 10,000 times.
• Suitable for environmental protection The green house effect caused by SFs has drawn much attention; solid dielectric designed switchgear eliminate the use of SFs, which further complies with standards for environmental protection.
• Power Distribution automation realisation
Sand Wind
SVI Solid Insulated Metal Enclosed Switchgear
Build-in SOJO electric SJDA2000 power distribution automation series products or select other optional products could realize the automation of power distribution,
' ; tis a retrofit option for updating the unit to be remote monitored and controlled.
-
Voltage Transformer is able to be fitted at the field site
v BEIJING SOJO B.ECTRIC CO, LTD.
Frequently
Operate
• Features
Safety
• Single phase/pole insulated, no potential hazard of phase to phase discharging
• Single inspection window fitted at the front for checking open contacts
• Multiple interlocking functions to prevent fault operations
• Optional configuration for shielded solid insulation
Green Products
• SFs Free
• Clean and environmentally-friendly insulation material
Maintenance Free
• Sealed for life, all live parts enclosed into epoxy resin housing, all sealed parts reach IP67 degree of protection.
• Mechanisms sealed in metal box, prevent from dust, ·moist and pollution.
• Mechanical endurance reaches 10,000 times.
Long Lasting
• Sealed for life, all live parts enclosed into epoxy resin housing, all sealed parts reach IP67 degree of protection.
• Mechanisms sealed in metal box, prevent from dust, moist and pollution.
• Mechanical endurance reaches 10,000 times.
• 30 years lifespan
Cost Performances
• Decreases total expenditure by half, low maintenance cost
• Competitive cost price due to high productivity of the "57" Express production line
BEIJING SOJO ELECTRIC CO., LTD.
Smart Grid for Efficiency
• WIC1 self-powered relay as standard configuration for circuit breaker modular, other relays also available upon request.
• Remote control, monitoring and analyzing available through DTU(Data Transfer Unit) and RTU(Remote Terminal Unit)
Compact and Modular Design
• Dimensions for 12kV standard 3 ways units: 1200mm(Length)x780mm(Width) x1430mm(Height)
• Dimensions for 24kV standard 3 ways units: 1200mm(Length)x800mm(Width) x1430mm(Height)
• Modular design enables field assembling, good for applications at locations with small entrances: mining industry, wind farm, compact secondary substation
Flexible
• Modular structure, as many combinations/panels as possible
• Both left and right sides extensible
• Allows field assembling
• Enables retrofit motorization
• Optional cable testing points on front panel
Incoming cable terminates at the front
• Able to place panels beside walls - saving GFA, reduce the • MV switch room size, and also this panels can be located in
the basement
Operates under Extreme Conditions
• Ambient Temperature: -50 'c to 70 'c • Altitude: s 5500 Meters
• Humidity: Daily Averages 95%; Monthly Averages90%
• 24 hour water resistance at a pressure of 0.3 bar and voltage of 12kV
• Sealed electrified body IP67; Fuse tube IP67; Metal enclosure IP4X
L... ca Q) C>
..c: (.) .........
"3: en "'C s ca
:::::J en c:
"'C -0 en
D Ring Main Unit
) ) ) ) ) XGW-12 SFs Ring Main Unit
• Brief Introduction
Ring Main Units - switches can be freely assembled in a completely sealed tank filled with SFs gas, which could be both manual and motor operation. FTU/ RTU is operational. Up to 6 switches can be assembled in one enclosure. Load break switches, circuit breakers and fuse-switch combination can be freely assembled. Cables exit from front side or rear side of the unit. Switch operation is controlled by spring mechanism; permanent electromagnetic protection is an optional configuration. Circuit breaker can adopt self-powered micro-computing relay or normal micro-computing protection relay.
• Model Ring Main Unit
•
•
X G W - 12 - 20 - D
I I L Design code
~ Rated short time withstand current
Rated voltage ~------- Outdoor
~-------- Fixed Type
~--------- Metal Enclosed
Technical Data
• Rated voltage 12kV
• Rated current 630A
• Rated short time withstand current 20kA,4s
• Rated peak withstand current 50kA
• 1 min power frequency withstand 42kV
• Lightning impulse withstand voltage 110kV
• Gas pressure 0.03MPa
• Mechanical life 5000
• Degree of protection IP67
• Annual leakage rate 0.3%o
Technical Features
• Stainless steel enclosure, filled with SFs gas
• Fully Shield and insulated,
• Maintenance-free
• Compressed-air load switch, high capacity
• long life expectancy
• Visible interrupting gap
• Reliable interlocking
BEIJING SOJO ELECTRIC CO., LTD.
) ) ) ) ) XG\115-12 ModJICI' Air-insulated Ring Main I.hit
• Brief Introduction
XGN15-12 Modular Air-insulated RMU adopts Schneider SFs Load Break Switch as top unit, domestic made SFs LBS is also available. This unit is suitable for application at AC 50 Hz, 12 kV power distribution systems. It is designed for use in following applications: compact secondary substations, small industries, wind power plants, office buildings, hospitals, airport tunnels and underground railways.
• Model
X G N 15 - 12
Rated voltage
Design Code
Indoor Type
'-------- Fixed Type
'--------- Metal Enclosed
• Technical Data
• Rated voltage
• Rated current
• Rated short time withstand current
• Rated peak withstand current
• 1 min power frequency withstand voltage
• Lightning impulse withstand voltage
• Transit current
• Mechanical Life
• Degree of protection
• Structure Features
12kV
630A
20kA, 3s
50kA
42kV
75kV
1700A
5000
IP3X
• Busbar is located at the top of the unit crossing through the whole unit.
Load break switch adopts Schneider top unit.
• Spacious cable compartment, outgoing cable connected by unscreened cable
connector.
• Low voltage compartment has spring operation mechanism and it is
interlocked to ensure safe operation.
BEIJING SOJO ELECTRIC CO., LTD.
XGN15-12 Modular Air-insulated Ring
Main Unit
11111•~' 3130103
D'f!i!Wi*~~ (<l'~l tltl!Hi~~~ Schneider Electric (China) Investment Co., Ltd.
~w_, ~tJlO!ili:t:i~"tmtffHi~~~
~D'f!i!Wi*~"'\
KYN28A-12(GZS1)Air Insulated
Removable Metal Enclosed Switchboard
KYN28A-12(GZS1)Air Insulated Removable
Metal Enclosed Switchboard
E Medium Voltage Switchboard
) ) ) ) ) KYN28A-12(GZS1) Air Insulated Removcble tvletal &closed Switdixad
• Brief Introduction
KYN28A Air insulated metal enclosed switchboard, which is for 3 to 12kV AC, 50 Hz current redistribution, can be fitted with ABB VD4 circuit breaker or domestic made VS1 circuit breaker. It also has the functions of control, protection and monitoring of circuit.
• Model
K Y N 28A-12
~Voltage level Design code
Indoor ~------Removable
~-------Metal enclosed
• Technical Specification
• Rated voltage
• Rated current
• Rated short time withstand current
• Rated peak withstand current
• 1 min Power frequency withstand voltage
• Lightning impulse withstand voltage
• Rated shirt circuit current breaking times
• Mechanical life
• Degree of protection
• Technical Features
12kv
630-3150A
16-50kA, 4s
40-125kA
42kV
75kV
50
2000
IP4X
• Enclosure is made of aluminum coated steel sheet which is light
weighted, high mechanical strength.
• Electrical gap larger than 125mm, composite insulation gap larger
than 30 mm.
• Central-positioned circuit breaker.
• Integrated interlocking mechanism.
• More than 80 circuit schemes.
BEIJING SOJO ELECTRIC CO., LTD.
) ) ) ) ) XGN2 Air Insulated Indoor Fixed Type Medium Voltage Switchboard
• Brief Introduction
XGN2 - 12 Air insulated metal enclosed fixed type switchboard is suitable for application at three phases, 50Hz, 3.6 to 12kV power distribution systems for current redistribution, where the busbar is single and it can be extended to single busbar bypass or double busbars. The main switchboard adopts ZN28A vacuum circuit breaker. Main switch, isolator switch, earth switch, and the covers are mechanically interlocked. The design ensured the easy operation, convenient maintenance, and high reliability.
• Model
XG N 2-12
~ Rat:d voltage Design code
Indoor type
Fixed type
• Technical Data
• Rated voltage
• Rated current
• Rated frequency
• Rated short time withstand current
• Rated peak withstand current
• Rated power frequency withstand voltage
• Rated lightning impulse withstand voltage
• Degree of protection
• Technical Features
12kV
630-3150A
50Hz
16-50kA,4s
40-125kA
42kV
75kV
IP4X
• Metal enclosed structure, independent compartment for busbar, cables and
relays, compartment to compartment are partitioned by metal board.
• Busbar in busbar compartments is not flat positioned, it is bended upward
and downward. The connection through two switchboards is through wall
bushings. Such design is intended to isolate the fault in busbar compartment
being spread.
• Earthing bar is through the whole switchboard to make sure the enclosure
is securely grounded.
• The electrical gaps are all exceed 125mm for phase to phase distance and
distance from phase to ground.
BEIJING SOJO ELECTRIC CO., LTD.
XGN2 Air Insulated Indoor Fixed Type
Medium Voltage Switchboard
' .. -XGN 68 Fixed type metal enclosed
switchgear
) ) ) ) ) XGN 68 Fixed Type Metal Enclosed Switchgear
• Brief Introduction
XGN68-12 is Air Insulated fixed type metal enclosed ring main switchgear. Compared to traditional XGN68-12, its design has been optimized by SOJO in recent years. The size has been reduced by 40%, almost the same size as SFs RMU. The problem as difficult to change the fuse was also solved. It is more practical and with a high level of protection level. This product is suitable for secondary transformer control and protection.
• Model
XG N 68-12
~ Volt~ge level Design code
Indoor
Fixed type
• Technical Data
• Rated voltage
• Rated current
• Rated frequency
• Rated short time withstand current
• Rated peak withstand current
• Rated power frequency withstand voltage
• Rated lightning impulse withstand voltage
• Degree of protection
• Technical Features
12kV
630, 1250A
50Hz
20kA,4s
50kA
42kV
75kV
IP3X
Switchgear is divided as top unit and down unit. Top unit includes main switch compartment, main busbar compartment and metering compartment; Down unit includes primary components compartment, cable compartment, and earth switch. The top unit and down unit are separated by metal board.
The vacuum interrupter and load break switch are protected using embedded pole technology. The epoxy resin casts protect them against contamination and condensation. The insulation ability is also improved as well as the size of the switchgear being reduced.
Isolator switch's position is visible through viewing window at the top unit. Operation security is protected by interlocking devices.
Operation mechanism adopts small spring mechanisms, which is able to be assembled and adjusted in separate the main switch.
BEIJING SOJO ELECTRIC CO., LTD.
F Low Voltage Switchboard
) ) ) ) ) GGD AC Low Voltage Switchboard
• Brief Introduction
GGD low voltage switchboard is suitable for power station, transformer substation
and mining enterprises. The rated working frequency, rated working voltage and
rated working current is 50Hz, 380V and 3150A respectively.
• Technical Data
Rated Rated Short- Rated Short Time Rated Model Voltage Rated Current Circuit Breaking Withstand Withstand
(V) (A) Current (k:A) Current (kA) Current(k:A) (Peak:)
GGDI 380 A B
100 630
15 15 30
c 400
GGD2 380 A 1500 (Ifill)
30 30 63 B 1000 c
GGD3 380 A 3150 50 50 105 B 2500 c 2000
BEIJING SOJO ELECTRIC CO., LTD.
Jl_
·I
GGD AC Low Voltage Switchboard
. ~ . . , ~ 000000,
. · II u .: .:
~I .. . I •
XGN 68 Fixed type metal enclosed
switchgear
• Gl,Gl.Gl,Gl • 09Qgo " go" • . m • B I"I ' . - . .. oc . • ... . .
• . .. . GCK Low Voltage Switchboard
) ) ) ) ) GCS Low Voltage Removable Switchboard
• Brief Introduction
The product is at the leading position of domestic market which can be applied in power distribution network, motor center, control, reactive compensation, etc. under the conditions of three phase alternating current, rated voltage no more than 380V, and rated current up to 4000A .
• Technical Data
• Rated voltage
• Rated current
• Rated short time withstand current
• Rated peak withstand current
• Degree of protection
400,690V
1000 (Vertical Busbar)/
4000(Horizontal Busbar)
50, BOKA, 18
105,176KA
IP3X, IP4X
) ) ) ) ) GCK Low Voltage Switchboard
• Brief Introduction
GCK Low Voltage Modular Switchboard applies in alternative current power distribution systems at a frequency of 50Hz, a rated voltage of 380V and a transformer's rated capacity up to 1000kVA. The product can be used as the equipment for substation, hotel and mining enterprise as power distribution equipment, power source of lighting and motor controls.
• Technical Data
• Rated voltage
• Rated current Horizontal Busbar
Vertical Busbar
• Rated insulation voltage
• Rated short time withstand current
• Rated peak withstand current
• Degree of protection
380,660V
1250, 1600,2500,3150A
400,800, 1200, 1600A
500, 1000V
30,50kA, 1s
63, 105kA
IP2X, IP3X
BEIJING SOJO ELECTRIC CO., LTD.
) ) ) ) ) MNS Indoor Metal Enclosed Withdrawable Switchboard
• Technical Features
It is suitable for all power distribution systems and locations that require a three-phase alternative current with a frequency of 50(60)Hz and a rated voltage from 380V to 660V such as power systems, petrochemical industries, public utilities, residential areas, drilling platform, mining enterprises, etc.
• Technical Data
• Rated voltage
• Rated incoming current
• Rated thermal stable current
• Rated dynamic thermal stable current
• 1 min power frequency withstand voltage
)) )) )GCD117-systems (GCY)
• Brief Introduction
0.38kV
100-5000A
40kA(3s)
100kAPeak
3kV
This equipment is a combination of standard modules which can be assembled into low voltage withdrawable switchboard. This equipment is suitable for power generation, transformation and distribution and other power consumption equipment at a rated alternating current frequency of 50 to 60 Hz and a rated voltage under 660V. Moreover, this equipment is the updated product of GCK and MNS the reliability and safety has been largely improved. The thermal stability and dynamic stability is in accordance with the IEC standards.
• Product Features
• This switchgear is SOJO self-developed product, awarded for GCY patent.
• Compact structure
• Universal parts, flexible installation
• Standard modular
• Easy installation, no need for special tools
• Advanced technology awarded for national patent
• High strength, flame retardant engineering plastic components,
• Reliable and safe
• Technical Data
1. Rated insulation voltage
2. Rated working voltage
3. Maximum main busbar current
4. Main busbar (1s) short time withstand current
5. Main busbar short time peak current
6. Maximum vertical busbar current
BEIJING SOJO ELECTRIC CO., LTD.
660V(1000v)
380V (660v)
4000A
80kA
176 kA
1000A
l = ---MNS Indoor metal enclosed
withdrawable Switchboard
GCD117-system(GCY)
..c: 0 ...... ·:s: en "'C Q) ...... c: ::::l 0 ~ Q)
0 a..
ZW32-12 Outdoor Medium Voltage Vacuum Circuit Breaker
ZW20A-12 Outdoor SFs Insulated Vacuum Circuit Breaker
ZW8-12 Outdoor Medium Voltage Vacuum Circuit Breaker
G Pole Mounted Switch
) ) ) ) ) ZW Series Outdoor Medium
Voltage Vacuum Circuit Breaker
• ZW32-12 Outdoor Medium Voltage Vacuum Circuit Breaker ZW32-12 Outdoor Pole Mounted Medium Voltage Vacuum Circuit Breaker, is an outdoor AC power distribution equipment with rated voltages of 12kV and service frequencies of 50Hz/60Hz. This equipment is designed with embedded pole technology. The vacuum interrupter is embedded within epoxy resin cast, with the fully shield structure which has the advantages of good hermetic character, humidity resistance and condensation resistance. It is used to open/close load current and breaking short circuit current. It also could be used as a control and protection electrical device in substation and the power distribution systems of mining enterprises, especially suitable for the high temperature and high humidity area.
• ZW20A-12 Outdoor SF6 Insulated Vacuum Circuit Breaker
There is a vacuum interrupter inside the circuit breaker. Its characteristics are such as stable and reliable opening/closing functions, safe, maintenancefree, small sized, light weighted and long term usage. The three phases circuit breaker is sealed within a SFs or N2 tank, which is against humidity and condensation. Therefore, the product is good for application at coastal or humidity environment. There are three CTs fitted at the circuit breaker which provide three-phase current for control function. The closing/opening of circuit breaker could be operated manually or motored. The operation mechanism has good interchangeability, and do not impact the original mechanism characteristic and hermetic ability of circuit breaker. This product could be combined with controller to be used as recloser, interrupter, sectionaliser and load switch.
• ZWB-12 Outdoor Medium Voltage Vacuum Circuit Breaker ZWB-12/630-20 is an outdoor medium voltage vacuum circuit breaker which is applied for power distribution network where the rated voltage is 12kV and below and service frequency is 50Hz. It is widely used in the rebuilding project of urban and suburbs power networks, mining enterprises and other public facilities. This equipment could be used to open/close load current and breaking short circuit current. It also could be used as a power supplying unit in ring network and terminal equipments with the functions of power distribution, controlling and protecting electrical devices. It's the ideal equipment to realise the power distribution automation.
BEIJING SOJO ELECTRIC CO., LTD.
• ZW32-15/27/38 Solid Dielectric TlTee-phase VacWTI Recloser
General Description
This recloser adopts pole embedded technology, encapsulated vacuum bottles for the fault interruption, epoxy resin and silicon rubber for the insulation. Magnetic actuated mechanism combined with optional spring mechanism enable both CLOSE and TRIP operations when the battery runs out during dead line. It is rated for three-phase systems up to 38kV maximum, BOOA continuous and 20kA interrupting maximum. Voltage sensors and multiple ratio CTs are encapsulated inside each pole, providing necessary signals and reading for multiple protections and meterings, also ready for future automation realization. Complete with SOJO SJFD2000 microprocessor recloser controller, the recloser is able to perform functions as auto reclosing and sectionalizing. The recloser also has connection interfaces compatible with controller from diverse brands.
Features
Reliability
- 10,000 times mechanical endurance - UV resistant solid insulation material - 100% factory tested for partial discharge - Single molded design ensure longer creepage distance
Maintenance-free
- Solid insulation material enables application under high contamination environment - Magnetic actuated mechanisms with few moving parts
ZW32-15/27/38 Solid Dielectric Three
phase Vacuum Recloser
- Painted Stainless steel enclosure and operation shaft guarantee maximum corrosion protection
Flexibility and Compatibility
- Optional spring assisted magnetic actuator enables CLOSE and TRIP manually - Compatible with controller or relays from other brands - Various selections of cable connection interfaces
Smart Grid and Automation
- Encapsulated 3 multi-ratio current transformers - Encapsulated 6 voltages sensors maximum
Environmentally Friendly
- SFs free - Clean and recyclable material
BEIJING SOJO ELECTRIC CO., LTD.
ZW32-15/27/38 Solid Dielectric Three
phase Vacuum Recloser
...c::: (.) ..........
·== en "'O Q)
.......... c: :::l 0 ~ Q)
0 a_
• Product Dimensions
393.70 393. 70
558.30
• Internal Structure
Vacuum Interrupter
Drive Assembly
Magnetic Actuator
Auxiliary Switch
- Voltage Sensor
- Voltage Sensor
{I 38kV Enhancing
/~
1
Bush;ng
i.-- ----j-- Encapsulated CT
::.-----+- Encapsulated Voltage Sensor
~-~:---- Optional Manual Open Mechanism
BEIJING SOJO ELECTRIC CO., LTD.
ZW32-12 Outdoor Pole Mounted Medium
Voltage Vacuum Recloser
ZCHB-12 Medium Voltage Vacuum
Automatic Recloser
SJZVF Digital Control
System
. , II
L;:::J
SJFD2000 Microprocessor Recloser
Controller
• ZW32-12 Outdoor Pole Mounted Medium Voltage Vacuum Recloser
Outdoor medium voltage vacuum automatic recloser (recloser for short) is a new recloser which combines the vacuum circuit breaker and recloser controlling device. Micro computer protection has the functions of instantaneous tripping, delayed instantaneous tripping and three-section overcurrent protection. Users can set the value of delaying time for protection and the value for stand-by automatic switchover. The product integrated measuring, controlling, monitoring, communication and remote control in one, having the characteristics of high integration, flexible configuration, and friendly human-computer interaction. It is suitable for simple or complex power distribution network with or without background processes to realise the automation of power distribution system.
• ZCHS-12 Medium Voltage Vacuum Automatic Recloser
Outdoor medium voltage vacuum automatic recloser (recloser for short) is a new recloser which combines the vacuum circuit breaker and recloser controlling device together. Micro computer protection has the functions of instantaneous tripping, delayed instantaneous tripping and three-section overcurrent protection. Users can set the value of delaying time for protection and the value for stand-by automatic switchover. The product integrated measuring, controlling, monitoring, communication and remote control in one, having the characteristics of high integration, flexible configuration, and friendly human-computer interaction. It is suitable for simple or complex power distribution network with or without background processes to realise the automation of power distribution system.
• SJZYF Digital Control System
SJZYF series digital control system adopts modem micro computing technology and communication techniques and multiple advanced technologies which is a new type medium voltage alternating current automatic electronic control unit. The unit integrates measurement, controlling, monitoring, communication, remote control, and other functions in one, having the characteristics of high integration, flexible configuration, and friendly human-machine interface. The advantages include compact structure, good exterior design, integrated functions, anti-disturbance, reliable operation and accurate measurement.
• SJFD2000 Microprocessor Recloser Controller
Recloser controller which is used for power distribution systems at rated voltage of 35kV and below for the protection and monitoring of circuitry and equipments, is an optimum product for the protection and control of pole mounted recloser. It is a feeder automation-remote terminal unit (FA-RTU). This control unit has a LCD display, continuous variable parameter setting, overcurrent protection, instant breaking, reclosing as well as other protection methods which can fulfill almost all the requirements from power distribution system. This protection relay has high accurate action, high antiinterference ability, ability to duck transformer magnetizing surge and ability to improve instant breaking accuracy and reliability. It can automatic eliminate the instant fault and can also permanently isolate section of permanent fault. Hence, the power cut area can be reduced and electric quality can be improved. This recloser has four communication protocols which is wired connection, optical cable connection, GPRS communication and GSM communication, which support real time data reading, checking and value setting, as well as switch remote opening and closing.
BEIJING SOJO ELECTRIC CO., LTD.
• ZW7-40.5 Outdoor Medium Voltage Vacuum
Circuit breaker
ZW7-40.5 Outdoor medium voltage vacuum circuit breaker is for alternating current of rated voltage of 40.SkV for outdoor installation, and for service frequency of 50Hz. Spring operation mechanism can be remote controlled or manual controlled for opening/closing. The design is in accordance with GB1984-89 High Voltage Circuit Breaker and IEC-56 High Voltage Circuit Breaker. ZW7-40.5 vacuum circuit breaker is mainly used for control and protection of outdoor power transmission systems of rated voltage of 35kV, as well as used for normal operation and short-circuit protection for users like distribution networks for city, country, and enterprises. The whole structure of this product is divided by two parts, the up porcelain is fitted with vacuum interrupter, and the down unit is supporting porcelain. This product is suitable for frequent operations, having the advantages of good air tightness, resistance to high temperature and pressure, no hazard of explosion and self-ignition, easy installation and maintenance.
• FZW32-12/630-20 Outdoor Medium Voltage
Isolated Vacuum Load Switch
It is applied in the power network where rated voltage is 12kV, rated current is 630A, rated frequency is 50Hz, could break off the current and overhead line, cable line, capacitor current of capacitor bank in certain distance. It has the functions of segmenting, isolation, connection and switching over, could be used in overhead line of the city network, rural network, railway, petroleum and chemical industry. The load switch has the advantages such as good opening ability, safe, reliable, long term usage, high frequency operation and low frequency maintenance.
• P&A PGS SF6 Insulated Pole Mounted Load
Switch
PGS SFs insulated Pole Mounted Switch is applied in the power network where rated voltage is 12kV, rated current is 630A, rated frequency is 50Hz. When there is fault in the circuit, it could timely isolate the fault section, recover the power supply of non-fault section. The product has three operation means: mannul, meter and remote. It could realize the automated function of power distribution network.
BEIJING SOJO ELECTRIC CO., LTD.
I I !.&, . I ~
I I. .. ,._
ZW7-40.5 Outdoor Medium Voltage Vacuum Circuit breaker
FZW32-12/630-20 Outdoor Medium Voltage Isolated Vacuum Load Switch
P&A PGS SFs Insulated Pole Mounted Load Switch
LIEJIE.ll.,,. 11:1111:1111:11
,------,----
ca:J • CD• mi· Cc· Cc· cc · Cc· mi· cm· cZl •
., ..... §··s:-,.,. .... ..... . . * .. •ll•R• . .... «• Jlt111
11!.:h:I.it<l!.:t;\l!:l-.!tlUUt&t.:l:•UWtl.'f'<.o t:l.liN.l'r
'i, .... r•HA,_ •' •• om
.. .,. '"'~"'m-• - un:~·::!""'u
.... . u ............. ~·-: ..
: .. ; - :i : ...... , ~ "': ,. ..,,. . ........... .. .,.,.. U.u•-•• n >•H U >O
HH ..... -- ,,.,_,._. ~ .. HHHH.._0 .. . ..... ,_,_ .... ~~ .............. ,.,, .. ..
H Compact Prefabricated
Modular Substation
) ) ) ) ) Compact Prefabricated Modular Substation
• YKJ-40. 5kV Compact Prefabricated Modular Substation
Brief Introduction: YKJ Compact Prefabricated Modular Substation is mainly consisted by medium voltage switch board, substation comprehensive system, AC/ DC power system and unique kiosk. It combines with main transformer to form the 40.5kV urban and suburbs substation or 12kV switching station. The product realizes the functions of monitoring, protection, remoting communication and capacitance compensation to the whole substation (switching station).
Model:
Y K J-40.5(12)/XXX
I I T ransfurmer rated capacity Transformer rated voltage
Compact
'--------Substation (Switching Station)
~---------Prefabricated
Features: Miniaturization: 12kV primary equipment and secondary equipment are assorted by unit, assembled inside the switch board. 40.5kV protection device can apply the mode of centralized shield sets and be assembled the medium voltage switch board, comprehensive automation device together to place in the same kiosk, become all-in-one power supply and distribution equipment. Construction is not required within the substation, the land area decreases significantly. No watchkeeper necessary, the initial investment is reasonable.
Prefabricated production: The design, production, installation and inside wiring of all the equipments of substation are completed inside the factory. It will be tested qualified before delivery, delivered the wholly set to the site, which shortens the production cycle of substation, delivers rapidly and conveniently.
Modularization: Compact Type Prefabricated Modular Substation mainly consists of medium voltage switch board, substation comprehensive system, 12kV switch module and main transformer module. It pushes to increase the operation level of substation, lifts the technology and stable operation of substation to a higher level, realizes the modularization of product design, factorization of production and simplification of installation. The product satisfies the customer with one-stop service and by its high quality performance to assist the customer to realise a convenient operation environment.
BEIJING SOJO ELECTRIC CO., LTD.
Medium voltage power distribution
Monitoring and Control Centre
Communication Network
IM·frl§i•mtm;m1t.1.ijm(.] •• got.1,111§'i'3§
fjl,/l -101 ~ ... If
DM- 701 Power Distribution Remote Monitoring System
Coodinated with ABB Secondary Substation
) ) ) ) ) DM-701 Power Distribution Remote Monitoring System
• Brief Introduction
DM - 701 power distribution monitoring system adopts GPRS/GSM/SMS/Audio Call as communication protocol. It is suitable for application at power distribution center and load management systems. Clients can use the system for monitoring the electricity consumption status and make necessary plans to ease the tension of overload consumption to ensure the safe running of power distribution network.
• Technical Data
• Working Scope: three phase four cables 3x220/380V 3x1.6 (5)A
• Measurement Accuracy: Impulse power S±1 % Impulse electricity quantity S±1 % AC sampling measurement better than Class 1
• Insulation Ability: High voltage terminal insulation resistance>500MO Power frequency withstand voltage AC 2000V/1 min
• Electromagnetic compatibility: Resistance to surge interference 4000V Resistance to fast transient group of impulse interface 4000V Static Electricity 8000V
• Working environment Nominal working temperature (lndoorterminal)-10°C-+45°C Extreme working temperature (Indoor terminal) -20°C -+55°C Nominal working temperature (Outdoor terminal ) -15°C -+65°C Extreme working temperature (Outdoor terminal) -25°C -+ 75°C Humidity level S95%
e Reliability MTBF~100,000.00H
• System Functions
• Reactive power compensation • Electricity quality monitoring and load control • User side remote meter reading through RS485 communication (able to connect up
to 32 electric meters) • Data saving function • Statistic result for over-voltage time and voltage qualified rate • Support active reporting and measuring at ordered place. • Wireless GPRS communication.
BEi JING SOJO ELECTRIC CO., LTD.
J Medium-voltage Component
) ) ) ) ) VS1 (ZN63) Indoor AC Vacuum Circuit Breaker
• Description
The VS1(ZN63) indoor AC vacuum circuit breaker(hereinafter referred to as VCB) is a three-phase AC 50/60Hz 12kV circuit breaker, is available for the control and protection purposes for electrical installations of industrial and mining enterprises, power plants and substations, and is suitable for the places that require frequent operations. The VCB meets the requirements of GB1984-89, GB 3855-1996 and DL403-91, and complies with the requirements of IEC62271-200. This VCB is able to be used as fixed type or withdrawable type together with a chassis.
• Model Description
VS 1 12 I D D
I I Rated short orcu;1 brea•ng current (kAJ Rated current (kA)
Rated voltage (kV) ·--------Design code
~--------Vacuum circuit breaker
• Environmental Conditions
• Normal Conditions of Use 1. Ambient temperature: -15 'C -40 'C (Allow storage and transport at -30 'C) 2. Altitude: S1 OOOm 3. Relative humidity: Daily average S95%
Monthly average S90% Saturated vapor pressure: Daily average 2.2x10-3 MPa
Monthly average S1.8x10-3 MPa 4. Places without fire, explosion, heavy pollution, chemical corrosion and vibration.
• Special Conditions of Use Under higher altitude and higher humidity level, please consult SOJO for confirmation.
BEIJING SOJO ELECTRIC CO., LTD.
VS1(ZN63) Indoor AC Vacuum Circuit Breaker
Embedded Pole of VS1 Vacuum Circuit Breaker
L...
0 ........ ca (.)
""C c:
........ :::J ca
u..
1m11rm11n.11
Tag-turn fault indicator
Bolt Indicator
Panel Indicator
K Fault indicator
) ) ) ) ) SJ Fault indicator
• Brief Introduction
SJ Fault Indicators - SJ Short-circuit and earth 2 in 1 fault indicator applies in 10 kV power distribution networks which can be used for a quicker identification of a short circuit and an earth fault in high voltage network systems. The application of SJ fault indicator can reduce people's work load and improve the reliability of network .
• Model
Product Name
Power Line Short Circuit Fault Indicator
Power Cable fault indicator
Passive signal overhead earth and short circuit fault indicator
Passive signal cable type earth and short circuit fault indicator
Active signal one phase earth fault indicator (SJ-1PJ)
Active signal earth fault indicator (SJ-1PE)
• Technical Data
• Rated voltage
• Rated current • Conductive cable • Working temperature • Mechanical life
• Product Features
Tag-tum Indication Bolt Indication Tag-tum Indication Bolt Indication Tag-tum Indication Bolt Indication Panel Indication Bolt Indication Tag-tum Indication One-phase earth fault indicator For one-phase earthing control panel Short circuit & earth fault indicator For short circuit & earthino control pane
12kV
630A 35 to 240 mm2
-40 ·c - +65 ·c 5000
• Identify fault circuit and fault position • Precise and reliable, interfere resistance • Operation under load, easy to operate
Model
SJ-1PD-F SJ -1 P D-G SJ-2PD-F SJ-2PD-G SJ-1PE-F SJ -1 P E-G SJ-2PE-M SJ-2PE-G SJ-2PE-F SJ-IPJ.F SJ-1 PJ.K SJ-1PE-F SJ-1PE-K
BEIJING SOJO ELECTRIC CO., LTD.
) ) ) ) ) Current Temperature Fault Indicator
HR - 2PE - TL Current temperature fault indicator is used to monitor the short circuit fault,
earth fault, real time 3 phases current, 3 phases cables' temperature. The remote sensors
transmit packaged data at setting time and setting periods to indicator through DTU/RTU.
The indicator has LCD screen to show the current and temperature readings. Fault alarms
are also showed on the screen.
HR-2PE-TL Current &Temperature LCD panel type fault indicator is consisted by main device
(indicator with LCD screen), 3 pieces of short circuit temperature sensors, 1 piece of earth
fault current temperature sensor and one power adapter (DC 24V or AC220V power supply).
Short circuit current temperature sensor and earth current temperature sensor are connected
to indicator through cables. Data can be transmitted to remote terminal through 485 bus.
• Main Functions Short-circuit alarm indication: short circuit sensor detects the circuit current, when
there is a fault, the sensor will send out the signal when DTU/RTU polling to sensor, the alarm
will be then displayed at the LCD screen.
Earth fault alarm indication: earth fault sensor detects the circuit's zero-sequence
current value; when there is a fault, the earth current reach or exceeds the setting value, sensor
will send out the signal when DTU/RTU pooling to sensor, the alarm will be then displayed at
the LCD screen.
Cable temperature indication: Cable temperature real time showed on the LCD
screen and can be sent to remote terminal by DTU/RTU.
Load current indication: Load current real time showed on the LCD screen and can be
sent to remote terminal by DTU/RTU.
Automatic reset function: when the indicator is alarmed, if it is not reset manually. The
indicator will be automatically reset.
Manual reset function: when the indicator is alarmed, it can be reset by hold the "Reset/
Tesf' button for 1 s to deactivate the alarm.
Remote Reset: the indicator can also be reset by receiving DTU/RTU remote reset signal.
Power Supply Adapter: AC 220V or DC 24V power supply available for selection.
Technical Data:
Working scope: 20kV or below power distribution systems
Short circuit fault alarm: 600A-1 OOOA, continuous adjustable, factory setting: 200A
Short-circuit delay: 20-300 ms adjustable, factory setting:60ms
Earth current fault alarm:5A-60A, continuous adjustable, factory setting:1 OA
Earth delay: 20-300ms adjustable, factory setting:500ms.
Current measuring scope: 0-600A
Temperature measuring scope: -55°C -125·c
Working environment: -25°C+75°C
Operation power: DC24V
Auto-reset: 1 s-48h(factory setting:Bh)
Degree of protection: lndicator:IP40, Sensor: IP65.
Humidity s 95%
Protection: against water, acid, salt fog.
BEIJING SOJO ELECTRIC CO., LTD.
L...
0 ........ ca (.)
"'C c:
L.. Q)
E L..
.p en c: ~ I- L Voltage Transformer
)) ) )) JDZ12A-10R Single phase
Voltage transformer
Type: JDZ12A-10R Specification: 10/0.22kV or 10/0.1/0.22kV
• Usage It is connected with incoming and outgoing cables at lateral sides or connected with busbar through cable accessories for the purpose of power providing or measuring
• Feature poured with epoxy resin, fuse protection at either side, touchable cable accessory connection, completely sealed structure, safe and reliable
) ) ) ) ) JSZV12A-1 OR Three phase
Voltage transformer
Type: JSZV12A-10R Specification: 10/0.1 kV or 10/0.1/0.22kV
• Usage It is connected with incoming and outgoing cables at lateral sides or connected with busbar through cable accessories for the purpose of power providing or measuring
• Feature Poured with epoxy resin, fuse protection at either side, touchable cable accessory connection, completely sealed structure, safe and reliable
BEIJING SOJO ELECTRIC CO., LTD.
SO.ID
1\':1l€Mi16!.Mt.lfot§f m.e111@1\llfi!.Mt.lfot§ II _______________ _ L-Q)
E
L Current Transformer
) )) )) LDZK-10 series open-core
current transformer
Type: LDZK-10 series Precision: class 0.5 or class 1OP10
• Usage It is installed at incoming and outgoing cables, suitable for load breaker protection and current measurement.
• Feature Compact, small sized, light weight, easy-installation, widely applied into compact completely sealed switchgears, directly installed at connected cables, quick and convenient.
))))) LDKW1-10 series bushing
current transformer
Type: LDKW1-10 series Precision: class 0.5 or class 1OP10
• Usage It is installed at incoming and outgoing cables, suitable for breaker protection and current measurement.
• Feature Compact, light weight, fixed at the bushing of ring main units, quick and convenient installation, beautiful exterior
)) )) ) LDZK-10 series through-core
current transformer
Type: LDZK-10 series Precision: class 0.2 or class 0.28
• Usage It is installed at incoming and outgoing cables, suitable for load breaker protection and current measurement.surveying.
• Feature The semicircular ring core and secondary windings are vacuum poured by high quality epoxies resin in the fire resistant plastic casing, which has the characteristic of moisture proof, stable performance and maintenance-free. It is fixed at cable compartment of ring main switchgears. Small, light weight, fixed into cable compartment of ring main units, easy installation .
BEIJING SOJO ELECTRIC CO., LTD.
L-
..E en c: ca L-
I-.__.. c: Q) LL-
~ (_')
'"C c: ca L-Q)
E L-
..E en c: ca L-
IQ) C'> ca .__..
~