Scrubber Nozzle 32

52
B1 FULL CONE NOZZLES Overview Full Cone Spray Nozzles Table of Contents – A quick 1/4 turn of the wrist removes spray tips without tools. – Integral seal that remains attached to the spray tip to prevent accidental misplacement. – Available in metal, ProMax ® (a chemically-coupled, glass- reinforced engineering grade of polypropylene) and Kynar materials. (See Section K, Special Purpose Spray Nozzles). • UniJet ® Nozzles: – Simply unscrew the retainer cap and remove the spray tip by hand. Then install the new spray tip and tighten the retainer cap to secure the spray tip in place. – Available in metal material. Many of our nozzles are available in quick-connect versions. Watch for the QuickJet, Quick FullJet ® and UniJet designations on the following pages. These nozzles are available with a wide variety of body types, mounting options, adapters, plugs, strainers, check valves, plates, fittings and more. See Section L, Accessories, for complete information. Standard Spray FullJet Spray Nozzles ...................................... B3 Quick FullJet Spray Nozzles ............................... B10 ProMax Quick FullJet Spray Nozzles ........................ B10 UniJet Spray Nozzles ..................................... B14 Wide Angle Spray FullJet Spray Nozzles ..................................... B17 Quick FullJet Spray Nozzles ............................... B21 ProMax Quick FullJet Spray Nozzles ........................ B21 UniJet Spray Nozzles ..................................... B24 Narrow Angle Spray 15°/30° FullJet Spray Nozzles ..................................... B27 Quick FullJet Spray Nozzles ............................... B30 Standard and Extra Large Free Passage Spray SpiralJet ® Spray Nozzles .................................. B32 Extra Large Free Passage Spray 50°/65°/80°/95° DistriboJet ® Spray Nozzles ................................ B35 Maximum Free Passage Spray FullJet Spray Nozzles ..................................... B38 Vaneless Spray FullJet Spray Nozzles ..................................... B40 Square Spray FullJet Spray Nozzles ..................................... B42 Quick FullJet Spray Nozzles ............................... B45 UniJet Spray Nozzles ..................................... B47 Oval Spray FullJet Spray Nozzles ..................................... B49 Wide Angle Square Spray FullJet Spray Nozzles ..................................... B51 Section B – Full Cone Spray Nozzles Our full cone nozzles are available in several styles. Standard Nozzles: Traditional threaded nozzles made of metal and, in some cases, Kynar ® or polypropylene. Quick-Connect Nozzles: Consisting of a nozzle body and spray tip, quick-connect nozzles can reduce maintenance time and lower costs. The spray tips can be removed for cleaning and/or replacement while the nozzle body remains on the pipe or spray header. We offer two lines of quick-connect nozzles: • QuickJet ® Nozzles: Spray tip Tip retainer UniJet Spray tip with seal Male body Female body Male body Female body QuickJet Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email: [email protected]

description

Scrubber Nozzle 32

Transcript of Scrubber Nozzle 32

Page 1: Scrubber Nozzle 32

B1

Full

Co

ne

no

zzle

s

Overview Full Cone Spray Nozzles Table of Contents

– A quick 1/4 turn of the wrist removes spray tips without tools.

– Integral seal that remains attached to the spray tip to prevent accidental misplacement.

– Available in metal, ProMax® (a chemically-coupled, glass-reinforced engineering grade of polypropylene) and Kynar materials. (See Section K, Special Purpose Spray Nozzles).

• UniJet® Nozzles:– Simply unscrew the retainer cap and remove the spray tip by

hand. Then install the new spray tip and tighten the retainer cap to secure the spray tip in place.

– Available in metal material.Many of our nozzles are available in quick-connect versions. Watch for the QuickJet, Quick FullJet® and UniJet designations on the following pages. These nozzles are available with a wide variety of body types, mounting options, adapters, plugs, strainers, check valves, plates, fittings and more. See Section L, Accessories, for complete information.

Standard Spray

FullJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3

Quick FullJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10

ProMax Quick FullJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . B10

UniJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14

Wide Angle Spray

FullJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B17

Quick FullJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B21

ProMax Quick FullJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . B21

UniJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B24

Narrow Angle Spray 15°/30°

FullJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B27

Quick FullJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B30

Standard and Extra Large Free Passage Spray

SpiralJet® Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B32

Extra Large Free Passage Spray 50°/65°/80°/95°

DistriboJet® Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B35

Maximum Free Passage Spray

FullJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B38

Vaneless Spray

FullJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B40

Square Spray

FullJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B42

Quick FullJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B45

UniJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B47

Oval Spray

FullJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B49

Wide Angle Square Spray

FullJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B51

Section B – Full Cone Spray Nozzles

Our full cone nozzles are available in several styles.

Standard Nozzles: Traditional threaded nozzles made of metal and, in some cases, Kynar® or polypropylene.

Quick-Connect Nozzles: Consisting of a nozzle body and spray tip, quick-connect nozzles can reduce maintenance time and lower costs. The spray tips can be removed for cleaning and/or replacement while the nozzle body remains on the pipe or spray header. We offer two lines of quick-connect nozzles:

• QuickJet® Nozzles:

Spray tip

Tip retainer

UniJet

Spray tip with seal

Male body

Female body

Male body

Female body

QuickJet

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 2: Scrubber Nozzle 32

B2

Fu

ll

Co

ne

No

zz

le

s

• Reduce operating costs and maintenance downtime by using quick-connect nozzles. Nozzle bodies remain on the header – only spray tips are replaced.

• Use strainers to reduce nozzle clogging and ensure optimum performance.

• Use adjustable ball connections for quick, precise nozzle orientation.

• Evaluate your specific spraying application and implement a regular nozzle maintenance plan.

– Visual inspection of spray pattern. In full cone nozzles, watch for heavy streaks in the center of the spray. As wear occurs, more liquid flows to the center of the spray pattern.

– Monitor flow rate and pressure to detect changes resulting from orifice or vane wear.

• Be sure to use the best type of full cone nozzle for your application.

Optimization Tips

Maintenance essentials include:

Full Cone Spray Nozzles

– Standard full cone nozzles provide a uniform, round and full spray pattern consisting of medium- to large-sized drops.

– Spiral full cone nozzles produce relatively coarse drops in a full cone pattern with minimal flow obstruction.

– Spray coverage is more uniform in standard full cone nozzles while spiral type full cone nozzles produce high flow rates in a compact nozzle size.

• In addition to washing and rinsing, full cone nozzles are often used for drop disbursement in chemical reactions, metal cooling, dust suppression and fire protection. Drop size and coverage can be critical in these applications. Ask for drop size data in addition to general performance data.

Ball Connections

Full cone spray Full cone spiral spray

QPPA nozzle body

Optional external O-ring (CP7717-2/17-VI)

Spray tip

Strainers

Spray Pattern Inspection

ProMax® QuickJet® Nozzles with Replaceable Tips

Adjustable

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 3: Scrubber Nozzle 32

B3

Full

Co

ne

no

zzle

s

Features and Benefits

• Solid cone-shaped spray pattern with round impact area.

• Uniform distribution over a wide range of flow rates and pressures.

• Medium- to large-sized drops.

• Unique vane design with large flow passages provides superior control and uniform distribution.

• Removable caps and vanes for easy inspection and cleaning on most models.

• Removable vane has location marks for proper positioning after cleaning.

• Set screws in some models secure the vane in the nozzle to prevent dislocation caused by vibration.

• Polypropylene material option offers exceptional chemical and corrosion resistance and resists caking and buildup.

• Wall-mounted options for installation on room exterior, vessel or pipeline.

• For installations with space limitations, right-angle mounting options allow for mounting at a 90° angle.

Removable vane/cast body4" to 10" flange connection

H HF HH

One-piece body1/8" to 1" NPT or BSPT (M)

GD

H

Wall-mountedRemovable cap and vane

1/8" to 1/2" NPT or BSPT (F)

G

Removable vane/Polypropylene1-1/2" to 2" NPT or BSPT (F)

Maximum temperature rating is 150°F (66°C)

Spray Nozzles, Standard Spray

Removable vane/cast body1-1/4" to 8" NPT or BSPT (F)

One-piece body3/4" to 1" NPT or BSPT (F)

H

Removable cap and vane1/8" to 1/2" NPT or BSPT (F)

Removable cap and vane1/8" to 1/2" NPT or BSPT (M)

GG

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 4: Scrubber Nozzle 32

B4

Fu

ll

Co

ne

No

zz

le

s

Angle typeRemovable cap and vane

1/8" to 1/2" NPT or BSPT (M)

Wall-mountedOne-piece body

3/4" to 3" NPT or BSPT (F)

Angle typeRemovable cap and vane

1/8" to 1/2" NPT or BSPT (F)

GAHD GGD

Wall-mountedRemovable cap and vane

1/8" to 1/2" NPT or BSPT (M)

GGA

Ordering Info

Spray Nozzles, Standard Spray

• See page B2 for optimization tips.

Optimization Tips

• Cooling coke, primary metals and other materials

• Creation/dispersion of drops in chemical reaction processing

• Dust control

• Fire suppression/prevention

• Foam break-up, aeration, deaeration

• Gas scrubbing, washing, cooling

• Washing/rinsing

Applications

BSPT connections require the addition of a “B” prior to the inlet connection.

Flange ConneCtion

10 HF – SS 1200I I I I

Inlet Conn.

Nozzle Type

Material Code

Capacity Size

Standard Spray nozzle

1/4 g – SS 10I I I I

Inlet Conn.

Nozzle Type

Material Code

Capacity Size

– Adjustable ball fittings

– Check valves

– Pressure gauges

– Pressure regulators

– Pressure relief valves

– Solenoid valves

– Split-eyelet connectors

– Strainers

See Also http://

• FullJet Maximum Free Passage spray nozzles for applications prone to clogging

• SpiralJet® spray nozzles for maximum liquid throughput

• Kynar® FullJet spray nozzles for integrated circuit and PCB manufacturing, washing and rinsing, cooling and more (See Section K, Special Purpose Spray Nozzles)

• Accessories

• Kynar Quick FullJet spray nozzles for strippers, etchers, developers (See Section K, Special Purpose Spray Nozzles)

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 5: Scrubber Nozzle 32

B5

Full

Co

ne

no

zzle

s

Performance Data

Spray Nozzles, Standard Spray

*At the stated pressure in psi.

InletConn.(in.)

Nozzle Type

CapacitySize

OrificeDia.

Nom.(in.)

Max.Free

PassageDia.(in.)

Capacity(gallons per minute)*

SprayAngle

(°)*Standard

TypeWall

Mounted Angle

G GG H HH GD HD GGD GA GGA 5 7 10 20 30 40 60 80 100 150 7 20 80

1/8

l l l l l 1 .031 .025 .07 .08 .10 .14 .17 .19 .23 .26 .29 .35 – 58 53

l l l 1.5 .047 .025 .11 .13 .15 .21 .25 .28 .34 .39 .43 .52 52 65 59

l l l l l l l 2 .047 .040 .15 .17 .20 .28 .33 .38 .46 .52 .58 .70 43 50 46

l l l l l l l 3 .063 .040 .22 .25 .30 .41 .50 .57 .68 .78 .87 1.0 52 65 59

l l l l l l l 3.5 .063 .050 .25 .30 .35 .48 .58 .66 .80 .91 1.0 1.2 43 50 46

l l 3.9 .078 .040 .28 .33 .39 .54 .65 .74 .89 1.0 1.1 1.4 77 84 79

l l l l l l l 5 .078 .050 .36 .42 .50 .69 .83 .95 1.1 1.3 1.4 1.7 52 65 59

l l 6.1 .094 .050 .44 .52 .61 .84 1.0 1.2 1.4 1.6 1.8 2.1 69 74 68

1/4

l l l l l l l 6.5 .094 .063 .47 .55 .65 .89 1.1 1.2 1.5 1.7 1.9 2.3 45 50 46

l l l l l l l 10 .109 .063 .73 .85 1.0 1.4 1.7 1.9 2.3 2.6 2.9 3.5 58 67 61

l l 12.5 .125 .063 .91 1.1 1.3 1.7 2.1 2.4 2.9 3.3 3.6 4.3 69 74 68

3/8

l l l l l l l 9.5 .109 .094 .69 .81 .95 1.3 1.6 1.8 2.2 2.5 2.7 3.3 45 50 46

l l l l l l l 15 .141 .094 1.1 1.3 1.5 2.1 2.5 2.8 3.4 3.9 4.3 5.2 64 67 61

l l 20 .156 .109 1.5 1.7 2.0 2.8 3.3 3.8 4.6 5.2 5.8 7.0 76 80 73

l l l l l 22 .188 .109 1.6 1.9 2.2 3.0 3.6 4.2 5.0 5.7 6.3 7.6 87 90 82

1/2

l l l l l l 16 .141 .125 1.2 1.4 1.6 2.2 2.7 3.0 3.6 4.2 4.6 5.6 48 50 46

l l l l l l l 25 .188 .125 1.8 2.1 2.5 3.4 4.1 4.7 5.7 6.5 7.2 8.7 64 67 61

l l l l 32 .203 .141 2.3 2.7 3.2 4.4 5.3 6.1 7.3 8.3 9.2 11.1 72 75 68

l l l l l 40 .250 .141 2.9 3.4 4.0 5.5 6.6 7.6 9.1 10.4 11.5 13.9 88 91 83

l l 50 .266 .156 3.6 4.2 5.0 6.9 8.3 9.5 11.4 13.0 14.4 17.4 91 94 86

3/4

l l l 2.5 .188 .172 2.1 2.5 2.9 4.1 4.9 5.6 6.7 7.7 8.5 10.2 48 50 46

l l l 4.0 .250 .172 3.4 4.0 4.7 6.5 7.8 8.9 10.7 12.3 13.6 16.4 67 70 63

l l l 7.0 .375 .203 6.0 7.0 8.2 11.3 13.7 15.6 18.8 21 24 29 89 92 84

1

l l l 4.2 .234 .219 3.6 4.2 4.9 6.8 8.2 9.4 11.3 12.9 14.3 17.2 48 50 46

l l l 7.0 .328 .219 6.0 7.0 8.2 11.3 13.7 15.6 18.8 21 24 29 67 68 62

l l 8.0 .375 .219 6.9 8.0 9.4 13.0 15.6 17.8 21 25 27 33 72 81 82

l l 10 .469 .219 8.6 10.0 11.8 16.2 19.5 22 27 31 34 41 78 90 94

l l 12 .469 .250 10.3 12.0 14.1 19.4 23 27 32 37 41 49 89 92 84

Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 6: Scrubber Nozzle 32

B6

Fu

ll

Co

ne

No

zz

le

s Performance Data

Spray Nozzles, Standard Spray

*At the stated pressure in psi.

InletConn.(in.)

Nozzle Type

CapacitySize

OrificeDia.

Nom.(in.)

Max.Free

PassageDia.(in.)

Capacity(gallons per minute)*

SprayAngle

(°)*Standard

TypeWall

Mounted Angle

G GG H HH GD HD GGD GA GGA 5 7 10 20 30 40 60 80 100 150 7 20 80

1-1/4

l 6 .297 .250 5.1 6.0 7.1 9.7 11.7 13.4 16.1 18.4 20 25 48 50 44

l l 10 .375 .250 8.6 10.0 11.8 16.2 19.5 22 27 31 34 41 64 67 58

l l 12 .422 .250 10.3 12.0 14.1 19.4 23 27 32 37 41 49 66 70 60

l 14 .484 .250 12.0 14.0 16.5 23 27 31 38 43 48 57 77 80 70

l 16 .500 .313 13.7 16.0 18.9 26 31 36 43 49 54 66 73 76 66

l 20 .594 .313 17.1 20 24 32 39 45 54 61 68 82 90 93 81

1-1/2

l l 10 .375 .344 8.6 10.0 11.8 16.2 19.5 22 27 31 34 41 48 50 44

l l 16 .500 .344 13.7 16.0 18.9 26 31 36 43 49 54 66 72 74 64

l l 20 .563 .344 17.1 20 24 32 39 45 54 61 68 82 74 76 66

l l 30† .719 .406 26 30 35 49 59 67 81 92 102 123 91 94 82

2

l 17 .500 .438 14.6 17.0 20 28 33 38 46 52 58 70 49 50 44

l l 30 .688 .438 26 30 35 49 59 67 81 92 102 123 72 74 64

l l 35 .750 .438 30 35 41 57 68 78 94 107 119 143 75 77 68

l l 40 .828 .438 34 40 47 65 78 89 107 123 136 164 78 80 70

l l 50† .938 .563 43 50 59 81 98 111 134 153 170 205 83 85 75

l l 60† 1.125 .563 51 60 71 97 117 134 161 184 204 246 98 100 86

2-1/2

l l 25 .594 .563 21 25 29 41 49 56 67 77 85 102 49 50 44

l l 50 .875 .563 43 50 59 81 98 111 134 153 170 205 72 74 64

l l 60 .969 .563 51 60 71 97 117 134 161 184 204 246 76 78 68

l l 70 1.125 .563 60 70 82 113 137 156 188 215 238 287 79 82 72

l 80 1.125 .688 69 80 94 130 156 178 215 245 272 328 86 88 77

l 90 1.250 .688 77 90 106 146 176 201 242 276 306 369 95 97 84

3

l l 42 .750 .688 36 42 49 68 82 94 113 129 143 172 49 50 44

l l 80 1.094 .688 69 80 94 130 156 178 215 245 272 328 81 84 73

l l 90 1.188 .688 77 90 106 146 176 201 242 276 306 369 86 89 77

l l 100 1.281 .688 86 100 118 162 195 223 269 307 340 410 92 95 83

l 110 1.938 .813 93 110 131 186 228 263 322 372 416 509 86 89 77

l l 120 1.375 .813 101 120 143 203 248 287 351 406 454 555 102 105 89

Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.

†These capacity sizes are not available for H in polypropylene.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 7: Scrubber Nozzle 32

B7

Full

Co

ne

no

zzle

s

Performance Data

Spray Nozzles, Standard Spray

*At the stated pressure in psi.

InletConn.(in.)

NozzleType Capacity

Size

OrificeDia.

Nom.(in.)

Max.Free

PassageDia.(in.)

Capacity(gallons per minute)*

SprayAngle

(°)*

G GG H HF HH GD HD GGD GA 5 7 10 20 30 40 60 80 100 150 7 20 80

4

l l 160 1.688 .750 137 160 189 259 313 357 430 491 544 655 87 90 70

l l 180 1.859 .875 154 180 212 292 352 401 484 552 612 737 92 95 83

l l 200 2.0 1.0 171 200 236 324 391 446 537 613 680 819 97 100 87

l l 210 2.156 1.0 180 210 247 340 410 468 564 644 714 860 102 105 91

5

l l 250 1.875 1.125 214 250 295 405 488 557 672 767 850 1024 89 91 80

l l 280 2.078 1.125 240 280 330 454 547 624 752 859 952 1147 93 96 84

l l 320 2.688 1.375 274 320 377 519 625 713 860 981 1087 1310 97 100 87

l l 330 2.844 1.375 283 330 389 535 645 736 887 1012 1121 1351 102 105 91

6

l l 350 2.406 1.625 300 350 412 567 684 780 940 1073 1189 1433 87 90 78

l l 400 2.719 1.625 343 400 471 648 781 892 1075 1227 1359 1638 92 95 83

l l 450 3.031 1.750 385 450 530 729 879 1003 1209 1380 1529 1843 97 100 87

l l 480 3.219 1.750 411 480 566 778 938 1070 1290 1472 1631 1966 102 105 91

8

l l 500 2.750 1.875 428 500 589 810 977 1115 1343 1533 1699 2048 78 80 70

l l 600 3.156 1.875 514 600 707 972 1172 1338 1612 1840 2039 2457 86 88 77

l l 700 3.594 1.875 600 700 825 1135 1367 1561 1881 2147 2379 2867 92 95 83

l l 800 4.031 2.250 685 800 943 1297 1563 1784 2149 2453 2719 3276 102 105 91

l l 900 4.875 2.250 771 900 1060 1459 1758 2007 2418 2760 3058 3686 106 110 96

10

l 800 3.344 2.500 685 800 943 1297 1563 1784 2149 2453 2719 3276 78 80 70

l 1000 3.969 2.500 857 1000 1178 1621 1953 2229 2687 3067 3398 4095 86 89 77

l 1200 4.797 2.625 1028 1200 1414 1945 2344 2675 3224 3680 4078 4914 97 100 87

l 1300 5.313 2.625 1114 1300 1532 2107 2539 2898 3493 3987 4418 5324 103 106 92

Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 8: Scrubber Nozzle 32

B8

Fu

ll

Co

ne

No

zz

le

s

Spray Nozzles, Standard Spray

Dimensions and Weights

Wall-Mounted

NozzleType

InletConn.(in.)

Length(in.)

Dia.(in.)

Hex.(in.)

NetWeight

(oz.)

GD(F)

1/8 1-25/64 – 9/16 1

1/4 1-39/64 – 11/16 1-1/2

3/8 1-13/16 – 13/16 2-1/2

1/2 1-13/64 – 1 4-3/4

GGD(M)

1/8 1-29/64 – 9/16 1

1/4 1-45/64 – 11/16 1-1/2

3/8 1-27/32 – 13/16 2-1/2

1/2 2-11/64 – 1 4-1/2

HD(F)

3/4 2-1/8 1-1/4 – 6

1 2-11/16 1-1/2 – 14

1-1/4 3-3/8 1-7/8 – 24

1-1/2 4-1/16 2-1/4 – 40

2 5-1/16 2-3/4 – 72

2-1/2 6-1/4 3-1/4 – 7 lbs.

3 7-5/16 4 – 12-3/4 lbs.

Based on largest/heaviest version of each type.

Standard NozzleType

InletConn.(in.)

Length(in.)

Dia.(in.)

Hex.(in.)

NetWeight

(oz.)

G(F)

1/8 1-7/32 – 9/16 1

1/4 1-15/32 – 11/16 1-1/2

3/8 1-13/16 – 13/16 2-1/2

1/2 2-1/4 – 1 6

GG(M)

1/8 1-9/32 – 9/16 3/4

1/4 1-9/16 – 11/16 1-1/2

3/8 1-27/32 – 13/16 2-1/2

1/2 2-7/32 – 1 6

HBar Stock

(F)

3/4 2-3/16 1-1/4 – 7-1/4

1 2-3/4 1-1/2 – 13

HCast(F)

1-1/4 3-7/16 2-1/16 – 20

1-1/2 4-1/16 2-5/16 – 28

2 5-7/16 3 – 60

2-1/2 6-7/8 3-7/16 – 76

3 7-23/32 4-1/8 – 96

4 9-7/8 5-7/16 – 18 lbs.

5 12-1/4 6-3/4 oct. – 38 lbs.

6 14-3/8 8 oct. – 53 lbs.

8 18-1/2 9-1/2 oct. – 92 lbs.

HPolypropylene

(F)

1-1/2 4-1/16 2-11/32 – 2-1/4

2 5-9/32 2-13/16 – 3-3/4

HF(Flange)

4 8-1/8 9 – 27 lbs.

5 10-9/16 10 – 36 lbs.

6 12-5/8 11 – 49 lbs.

8 16-5/8 13-1/2 – 106 lbs.

10 20-3/4 16 – 173 lbs.

HH(M)

1/8 7/8 1/2 – 1/2

1/4 29/32 17/32 – 1/2

3/8 9/10 21/32 – 1

1/2 1-2/5 13/16 – 1-1/2

3/4 1-19/32 1-1/16 – 3-1/2

1 2-3/32 1-5/16 – 7

Based on largest/heaviest version of each type.

Based on largest/heaviest version of each type.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 9: Scrubber Nozzle 32

B9

Full

Co

ne

no

zzle

s

Spray Nozzles, Standard Spray

Material MaterialCode

Nozzle Type

G GG H HF HH GD HD GGD GA GGA

Bar Stock:

Brass (none) l l l l l l l l l

Mild Steel I l l l l l l l l l

303 Stainless Steel SS l l l l l l l l l

316 Stainless Steel 316SS l l l l

Polypropylene† PP l

Polyvinyl Chloride PVC l l l l

Cast:

Brass (none) l l

Cast Iron I l l

316 Stainless Steel SS l l

Materials

Based on largest/heaviest version of each type.

AngleType

NozzleType

InletConn.(in.)

A(in.)

B(in.)

C(in. sq.)

D(in.)

L(in.)

NetWeight

(oz.)

GA(F)

1/8 11/16 5/8 9/16 31/32 29/32 1-1/2

1/4 7/8 25/32 11/16 1-7/32 1-5/32 2

3/8 1 7/8 13/16 1-7/16 1-9/32 3-1/4

1/2 1-17/32 1-1/16 1 2-1/32 1-9/16 6-1/4

GGA(M)

1/8 11/16 21/32 9/16 31/32 15/16 1-1/2

1/4 7/8 13/16 11/16 1-1/4 1-5/32 2

3/8 1 29/32 13/16 1-7/16 1-5/16 3-1/4

1/2 1-17/32 1-1/8 1 2-1/32 1-5/8 6-1/4

Dimensions and Weights

†Polypropylene is only available for H with 1-1/2" and 2" inlet connections.

Some models are available in Kynar®. Other materials available upon request.

See Section K, Special Purpose Spray Nozzles for more details or contact your local representative.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 10: Scrubber Nozzle 32

B10

Fu

ll

Co

ne

No

zz

le

s

Quick FullJet nozzles are comprised of two components, a body and a spray tip. QGA, QHA, QLGA and QLHA are the four spray tips available. Each of these four spray tips are compatible with either the male or female bodies.

Features and Benefits

• Solid cone-shaped spray pattern with round impact area.

• Fast and easy installation of spray tips without tools.

• Automatic alignment.

• Lower cost – nozzle body can be reused – only spray tips are replaced.

• Removable caps and vanes for easy inspection and cleaning on some models.

• Non-removable vane contributes to uniform distribution across the impact area.

– Nozzle body, spray tip with integral seal.• ProMax Quick FullJet spray nozzle assemblies:

– Nozzle body, spray tip, optional external O-ring.

• Standard Quick FullJet spray nozzle assemblies:

• ProMax QuickJet® provides increased chemical resistance and less build-up. Additional protection against contaminants in harsh environments is provided by internal O-ring seal and optional external O-ring. See chart for maximum pressures at various temperatures.

• ProMax Quick FullJet spray tips color-coded for easy flow rate identification.

Quick and ProMax® Quick FullJet Spray Nozzles, Standard Spray

Standard connectionRemovable cap and vane

QGA QLGA

Standard connectionNon-removable vane

Large connectionNon-removable vane

QLHAQHA

Large connectionRemovable cap and vane

• QJA female and QJJA male inlet connections

• QJLA female and QJJLA male inlet connections

Standard QuickJet Bodies

QJA and QJLA female bodies or

QJJA and QJJLA male bodies

Spray tip

Quick FullJet Spray Tips

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 11: Scrubber Nozzle 32

B11

Full

Co

ne

no

zzle

s

• See page B2 for optimization tips.

Optimization Tips

• Accessories– ProMax QuickJet nozzle adapters

– QuickJet adjustable ball fitting nozzle bodies. See chart for maximum pressures at various temperatures

– QuickJet nozzle system adapters

– QuickJet nozzle system plugs

– QuickJet nozzle system plugs for ProMax bodies

– QuickJet split-eyelet bodies

– UniJet® nozzle system adapter for QuickJet systems• Kynar® Quick FullJet spray nozzles for strippers, etchers,

developers (See Section K, Special Purpose Spray Nozzles)

See Also http://

40 60 80 100 120 140 160 180 200 °F 4 16 27 38 49 60 71 82 93 °C

bar psi10.0 150

7.0 100

3.5 50

0 0

LIQUID TEMPERATURE

OPERATING REGION

PR

ES

SU

RE

ProMax QuickJet nozzle maximum pressures at various temperatures

Applications

standard Quick FullJet spray nozzles

• Cooling coke, primary metals and other materials

• Dust control

• Fire suppression/prevention

• Foam break-up, aeration, deaeration

• Gas scrubbing, washing, cooling

• Washing/rinsing

ProMax Quick FullJet spray nozzles

• Chemical manufacturing

• Coating

• Cooling

• Food processing

• Metal finishing

• Printed circuit board manufacturing

ProMax Quick FullJet Spray Tips

Quick and ProMax® Quick FullJet Spray Nozzles, Standard Spray

• QPPA male inlet connections ProMax Quick FullJet nozzles are comprised of two components, a body and a spray tip. Available spray tips are shown below. In addition, there is an optional O-ring recommended for harsh environments.

ProMax QuickJet® Bodies

Capacities at 10 psi (0.7 bar)

Red QPHA-151.5 gpm

Blue QPHA-101.0 gpm

Beige QPHA-8.8 gpm

Yellow QPHA-6.5.65 gpm

Green QPHA-5.5 gpm

Orange QPHA-3.5.35 gpm

Black QPHA-3.3 gpm

Gray QPHA-2.2 gpm

White QPHA-1.5.15 gpm

Brown QPHA-1.1 gpm

QPPA nozzle body

Spray tip

Optional external O-ring (CP7717-2/17-VI)

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 12: Scrubber Nozzle 32

B12

Fu

ll

Co

ne

No

zz

le

s Performance Data

and ProMax® Quick FullJet Quick Spray Nozzles, Standard Spray

*At the stated pressure in psi.

Inlet Conn.(in.)

Nozzle Type CapacitySize

OrificeDia.

Nom.(in.)

Max.Free

PassageDia.(in.)

Capacity(gallons per minute)*

SprayAngle

(°)*

QGA QLGA QHA QLHA QPHA 7 10 20 30 40 60 70 80 100 150 7 20 80

1/8, 1/4, 3/8, 1/2(QPHA 1/4, 3/8

only)

l l 1 .031 .025 – .10 .14 .17 .19 .23 .24 .26 .29 .35 – 58 53

l l 1.5 .047 .025 .13 .15 .21 .25 .28 .34 .37 .39 .43 .52 52 65 59

l l 2 .047 .040 .17 .20 .28 .33 .38 .46 .49 .52 .58 .70 43 50 46

l 2.5 .053 .040 .21 .25 .34 .41 .47 .57 .61 .65 .72 .87 43 50 46

l l 3 .063 .040 .25 .30 .41 .50 .57 .68 .73 .78 .87 1.0 52 65 59

l l l 3.5 .063 .050 .30 .35 .48 .58 .66 .80 .86 .91 1.0 1.2 43 50 46

l 4 .067 .050 .34 .40 .55 .66 .76 .91 .98 1.0 1.2 1.4 48 55 50

l l 5 .078 .050 .42 .50 .69 .83 .95 1.1 1.2 1.3 1.4 1.7 52 65 59

1/4, 3/8, 1/2(QPHA 1/4, 3/8

only)

l l l 6.5 .094 .063 .55 .65 .89 1.1 1.2 1.5 1.6 1.7 1.9 2.3 45 50 46

l 8 .096 .063 .68 .80 1.1 1.3 1.5 1.8 2.0 2.1 2.3 2.8 54 65 61

l l l 10 .109 .063 .85 1.0 1.4 1.7 1.9 2.3 2.4 2.6 2.9 3.5 58 67 61

l 15 .141 .063 1.3 1.5 2.1 2.5 2.8 3.4 3.7 3.9 4.3 5.2 80 85 80

3/8, 1/2

l 9.5 .109 .094 .81 .95 1.3 1.6 1.8 2.2 2.3 2.5 2.7 3.3 45 50 46

l l 15 .141 .094 1.3 1.5 2.1 2.5 2.8 3.4 3.7 3.9 4.3 5.2 64 67 61

l 20 .156 .109 1.7 2.0 2.8 3.3 3.8 4.6 4.9 5.2 5.8 7.0 76 80 73

l l 22 .188 .109 1.9 2.2 3.0 3.6 4.2 5.0 5.4 5.7 6.3 7.6 87 90 82

1/2

l 16 .141 .125 1.4 1.6 2.2 2.7 3.0 3.6 3.9 4.2 4.6 5.6 48 50 46

l 20 .161 .125 1.7 2.0 2.8 3.3 3.8 4.6 4.9 5.2 5.8 7.0 62 65 59

l l 25 .188 .125 2.1 2.5 3.4 4.1 4.7 5.7 6.1 6.5 7.2 8.7 64 67 61

l 30 .189 .141 2.5 3.0 4.1 5.0 5.7 6.8 7.3 7.8 8.7 10.4 69 72 66

l 32 .203 .141 2.7 3.2 4.4 5.3 6.1 7.3 7.8 8.3 9.2 11.1 72 75 68

l 40 .250 .141 3.4 4.0 5.5 6.6 7.6 9.1 9.8 10.4 11.5 13.9 88 91 83

l 50 .266 .156 4.2 5.0 6.9 8.3 9.5 11.4 12.2 13.0 14.4 17.4 91 94 86

Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 13: Scrubber Nozzle 32

B13

Full

Co

ne

no

zzle

s

and ProMax® Quick FullJet Quick Spray Nozzles, Standard Spray

Standard NozzleType

Length(in.)

Hex.(in.)

NetWeight

(oz.)

QJA+QGA 2-13/32 1 5

QJJA+QGA 2-5/16 7/8 4-1/2

QJLA+QLGA 2-25/32 1-1/8 8

QJJLA+QLGA 2-27/32 1-1/8 7-1/2

QJA+QHA 1-15/16 1 2-1/2

QJJA+QHA 1-27/32 1 2

QJLA+QLHA 2-7/32 1-1/8 4-1/2

QJJLA+QLHA 2-1/4 1-1/8 4-1/2

QPPA+QPHA 1-3/4 7/8 1/2

Based on largest/heaviest version of each type.

Dimensions and Weights Body Types

InletConn.(in.)

Standard Body

Conn. F Conn. M

QJA QJLA QJJA QJJLA QPPA

1/8 l l l

1/4 l l l

3/8 l l l l l

1/2 l l l l

Materials

Material MaterialCode

Spray Tip

QGA QLGA QHA QLHA

Brass (none) l l l l

303 Stainless Steel SS l l l l

ProMax Quick FullJet coMPlete Nozzle with exterNal o-riNg

Nozzle Body SPray tiP

3/8 QPPa + QPha – 2aI I I I

InletConn.

BodyType

TipType

CapacitySize

ProMax Quick FullJet coMPlete Nozzle without exterNal o-riNg

Nozzle Body SPray tiP

1/4 QPPa + QPha – 3I I I I

InletConn.

BodyType

TipType

CapacitySize

Quick FullJet coMPlete Nozzle

Nozzle Body SPray tiP

1/4 QJa – SS + Qha – SS 10I I I I I I

InletConn.

BodyType

MaterialCode

TipType

MaterialCode

CapacitySize

Standard Quick FullJet nozzles available in either brass with a Buna-N seal or stainless steel with a Viton® seal.

ProMax Quick FullJet nozzles available with a Viton seal.

Other materials available upon request.

Ordering Info

BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 14: Scrubber Nozzle 32

B14

Fu

ll

Co

ne

No

zz

le

s

Standard UniJet Bodies UniJet Spray Tips

Disc and core type303 Stainless Steel and

Hardened Stainless Steel only

One-piece spray tip

D TG

Spray Nozzles, Standard Spray

• Solid cone-shaped spray pattern with round impact area.

• Unique vane design with large flow passages provides superior control and uniform distribution.

• Quick and easy spray tip replacement – remove tips by unscrewing the retainer cap.

• Lower cost – nozzle body can be reused – only spray tips are replaced.

Features and Benefits

– Nozzle body, slotted strainer, core, disc, tip retainer.

– Nozzle body, spray tip, tip retainer.

• Large choice of interchangeable spray tips, body types/sizes, materials, spray patterns, spray angles, accessories.

• UniJet nozzle assemblies:

• T female and TT male inlet connections A typical UniJet assembly will consist of a T female body or TT male body, slotted strainer, core, disc and tip retainer. A typical UniJet assembly with TG tip will consist of a T female body or TT male body, spray tip and tip retainer.

Core

Disc

Slotted strainerSpray tip

T female body or

Tip retainer

TT male body

Tip retainer

T female body or

TT male body

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 15: Scrubber Nozzle 32

B15

Full

Co

ne

no

zzle

s

Spray Nozzles, Standard Spray

Mesh Selection Guide

OrificeDia.

in. (mm)

RecommendedScreenMesh

Up through.018 (.46) 200

.019 (.47)through.031 (.79)

100

.032 (.80)and larger 50

• See page B2 for optimization tips.

Optimization Tips

• Cooling primary metals and other materials

• Creation and dispersion of drops in chemical reaction processing

• Dust control

• Foam break-up, aeration, deaeration

• Gas scrubbing, washing, cooling

• Washing/rinsing

Applications

See Also http://

– Adjustable mounting clamp nozzle bodies

– Ball valve nozzle bodies

– Check valves

– Plates, tip retainers, adapters

– Plug valve nozzle bodies

– Rollover nozzle bodies

– Split-eyelet bodies

– Strainers

– Swivel nozzle bodies

• FullJet® Maximum Free Passage spray nozzles for applications prone to clogging

• SpiralJet® spray nozzles for maximum liquid throughput

• Kynar® Quick FullJet spray nozzles for strippers, etchers, developers (See Section K, Special Purpose Spray Nozzles)

• Accessories

Dimensions and Weights

UniJet Complete nozzle

nozzle Body Spray tip

1/4 t – SS + tG – SS 10l l l l l l

InletConn.

BodyType

MaterialCode

TipType

MaterialCode

CapacitySize

nozzle Body orifiCe diSC and Core

1/4 tt – SS + d4 – 35 HSSl l l l l l

InletConn.

BodyType

MaterialCode

OrificeDisc No.

CoreNo.

MaterialCode

Ordering Info

BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.

Standard NozzleType

Length(in.)

Hex.(in.)

NetWeight

(oz.)

T+D 1-1/2 13/16 2-1/4

TT+D 1-1/2 13/16 2

T+TG 1-31/32 13/16 2-1/2

TT+TG 1-31/32 13/16 2-1/4

Based on largest/heaviest version of each type.

Materials

Material MaterialCode

Spray Tip

D TG

Brass (none) l

303 Stainless Steel SS l l

Hardened Stainless Steel HSS l

Other materials available upon request.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 16: Scrubber Nozzle 32

B16

Fu

ll

Co

ne

No

zz

le

s Performance Data

Spray Nozzles, Standard Spray

D

TG

*At the stated pressure in psi.

BodyInlet

Conn.(in.)

OrificeDisc No. –Core No.

OrificeDia.

Nom.(in.)

Capacity(gallons per minute)*

SprayAngle

(°)*

10 20 30 40 60 80 100 150 200 300 20 40 80

1/4

D1-31 .031 .08 .11 .13 .15 .18 .20 .23 .27 .31 .37 49 47 43D1.5-31 .036 .10 .14 .17 .19 .23 .26 .29 .35 .40 .48 57 65 53D2-31 .041 .12 .16 .19 .22 .26 .30 .33 .40 .45 .55 62 63 61D3-31 .047 .13 .18 .21 .24 .29 .33 .37 .44 .50 .60 63 65 63D1-33 .031 .09 .11 .12 .14 .17 .20 .22 .26 .30 .37 27 32 35

D1.5-33 .036 .12 .15 .17 .19 .23 .26 .30 .36 .41 .50 37 43 45D2-33 .041 .13 .17 .21 .24 .29 .33 .37 .45 .52 .63 45 52 55D3-33 .047 .15 .21 .25 .29 .36 .41 .45 .55 .63 .76 48 54 57D4-33 .063 .20 .28 .34 .39 .47 .54 .60 .73 .83 1.02 50 56 61D1-35 .031 .08 .11 .13 .14 .17 .20 .22 .26 .29 .35 19 23 26

D1.5-35 .036 .10 .14 .17 .19 .23 .26 .29 .34 .39 .46 23 27 29D2-35 .041 .14 .18 .24 .25 .30 .34 .37 .45 .51 .60 40 44 47D3-35 .047 .16 .22 .26 .30 .36 .41 .45 .55 .62 .74 45 50 52D4-35 .063 .27 .37 .44 .50 .60 .70 .79 .93 1.1 1.3 68 70 71D5-35 .078 .34 .48 .58 .66 .80 .92 1.0 1.2 1.4 1.7 67 69 71D2-56 .041 – – .21 .25 .30 .35 .39 .47 .55 .67 – 14 17D3-56 .047 – – .29 .34 .41 .48 .53 .65 .75 .92 – 20 23D4-56 .063 – .39 .48 .55 .67 .78 .87 1.1 1.2 1.5 20 26 29D5-56 .078 .38 .54 .66 .76 .93 1.1 1.2 1.5 1.7 2.1 26 32 34D6-56 .094 .55 .78 .95 1.1 1.4 1.6 1.7 2.1 2.5 3.0 34 39 41D7-56 .109 .76 1.1 1.3 1.5 1.9 2.2 2.4 2.9 3.4 4.2 45 52 54D8-56 .125 .96 1.4 1.7 1.9 2.4 2.7 3.1 3.7 4.3 5.3 52 57 59D10-56 .156 1.4 1.9 2.3 2.7 3.3 3.8 4.3 5.2 6.0 7.4 62 65 67

For nozzles using Orifice Disc Nos. 1, 1.5 and 2 or Core Nos. 31 and 33, Slotted Strainer No. 4514-20 equivalent to 25 mesh screen size is supplied. For all other larger capacity Discs and Cores, Slotted Strainer No. 4514-32 equivalent to 16 mesh screen size is supplied.

Other body types may be available. Contact representative for further information.

For additional information see Data Sheet 4498-1.

*At the stated pressure in psi.

BodyInlet

Conn.(in.)

CapacitySize

OrificeDia.

Nom.(in.)

Max.Free

PassageDia.(in.)

Capacity(gallons per minute)*

SprayAngle

(°)*

5 7 10 20 30 40 60 80 100 150 7 20 80

1/4

.3 .020 .016 – – – .041 .050 .057 .068 .078 .087 .10 – 50 61

.4 .022 .018 – – – .055 .066 .076 .091 .10 .12 .14 – 56 63

.5 .024 .020 – – – .069 .083 .095 .11 .13 .14 .17 – 56 63

.6 .027 .020 – – – .083 .099 .11 .14 .16 .17 .21 – 54 62

.7 .030 .020 – – – .096 .12 .13 .16 .18 .20 .24 – 54 631 .036 .025 – – – .14 .17 .19 .23 .26 .29 .35 – 58 532 .047 .040 – – .20 .28 .33 .38 .46 .52 .58 .70 – 50 463 .062 .040 – – .30 .41 .50 .57 .68 .78 .87 1.0 – 65 59

3.5 .067 .050 – – .35 .48 .58 .66 .80 .91 1.0 1.2 – 50 465 .082 .050 – – .50 .69 .83 .95 1.1 1.3 1.4 1.7 – 65 59

6.5 .094 .063 .47 .55 .65 .89 1.1 1.2 1.5 1.7 1.9 2.3 45 50 4610 .109 .063 .73 .85 1.0 1.4 1.7 1.9 2.3 2.6 2.9 3.5 58 67 61

Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.

Other body types may be available. Contact representative for further information.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 17: Scrubber Nozzle 32

B17

Full

Co

ne

no

zzle

s

Spray Nozzles, Wide Angle Spray

GG-W

Angle typeRemovable cap and vane

1/8" to 1/2" NPT or BSPT (M)

One-piece body3/4" to 1" NPT or BSPT (F)

Removable vane/Polypropylene1-1/2" to 2" NPT or BSPT (F)

Maximum temperature rating is150°F (66°C)

One-piece body1/8" to 1-1/2" NPT or BSPT (M)

Features and Benefits

HH-WH-WH-W

One-piece cast bodyRemovable vane/cast body1-1/4" to 4" NPT or BSPT (F)

H-W

GGA-WGA-W

Angle typeRemovable cap and vane

1/8" to 1/2" NPT or BSPT (F)

Three-piece construction (body/cap/vane)

Removable cap and vane1/8" to 1/2" NPT or BSPT (M)

Three-piece construction (body/cap/vane)

Removable cap and vane1/8" to 1/2" NPT or BSPT (F)

G-W

• Wide-angle solid cone-shaped spray pattern with round impact area and spray angles from 120° to 125° at 10 psi (0.7 bar).

• Unique vane design with large flow passages provides superior control and uniform distribution.

• Removable caps and vanes for easy inspection and cleaning on most models.

• Removable vane has location marks for proper positioning after cleaning.

• Set screw secures vane in the nozzle to ensure it is not dislodged by vibration.

• Polypropylene material option offers exceptional chemical and corrosion resistance and resists caking and buildup.

• For installations with space limitations, right-angle mounting options allow for mounting at a 90° angle.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 18: Scrubber Nozzle 32

B18

Fu

ll

Co

ne

No

zz

le

s

Material MaterialCode

Nozzle Type

G-W GG-W GA-W GGA-W HH-W H-W

Bar Stock:

Brass (none) l l l l l l

Mild Steel l l l l l l l

303 Stainless Steel SS l l l l l l

316 Stainless Steel 316SS l l l l l l

Polypropylene† PP l

Polyvinyl Chloride PVC l l l

Cast:

Brass (none) l

Cast Iron l l

316 Stainless Steel SS l

†Polypropylene is only available for H with 1-1/2" and 2" inlet connections.

Some models are available in Kynar®. Other materials available upon request.

See Section K, Special Purpose Spray Nozzles for more details or contact your local representative.

Materials

Standard Spray nozzle

1/4 G – SS 14WI I I I

InletConn.

NozzleType

MaterialCode

CapacitySize

BSPT connections require the addition of a “B” prior to the inlet connection.

Ordering Info

• Cooling of primary metals and other materials

• Creating and dispersing drops in chemical reaction processing

• Deluging combustible materials and storage tanks for fire suppression/prevention

• Dust control in the processing of bulk ores, coal, limestone, sand, gravel

• Foam break-up, aeration, deaeration

• Gas scrubbing, washing, cooling

• Washing/rinsing

Applications

• See page B2 for optimization tips.

Optimization Tips

Spray Nozzles, Wide Angle Spray

See Also

– Adjustable ball fittings

– Check valves

– Pressure gauges

– Pressure regulators

– Pressure relief valves

– Solenoid valves

– Strainers

http://

• Accessories

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 19: Scrubber Nozzle 32

B19

Full

Co

ne

no

zzle

s

Performance Data

Spray Nozzles, Wide Angle Spray

*At the stated pressure in psi.

InletConn.(in.)

Nozzle TypeCapacity

Size

OrificeDia.

Nom.(in.)

Max.Free

PassageDia.(in.)

Capacity(gallons per minute)*

SprayAngle

(°)*Standard Type Angle

G-W GG-W HH-W H-W GA-W GGA-W 5 7 10 15 20 30 40 60 80 5 10 80

1/8

l l 1.5W .047 .025 – – .15 .18 .21 .25 .28 .34 .39 – 120 86

l l l 2.8W .063 .040 – – .28 .34 .39 .46 .53 .64 .73 – 120 102

l l l l l 4.3W .078 .040 – – .43 .52 .59 .71 .81 .98 1.1 – 120 102

l l 5.6W .094 .040 – .48 .56 .67 .77 .93 1.1 1.3 1.5 – 120 102

l l l l l 8W .094 .050 – .68 .80 .96 1.1 1.3 1.5 1.8 2.1 – 120 103

1/4

l l 10W .109 .050 .73 .85 1.0 1.2 1.4 1.7 1.9 2.3 2.6 112 120 103

l l 12W .125 .050 .87 1.0 1.2 1.4 1.7 2.0 2.3 2.7 3.1 114 120 103

l l l l l 14W .141 .063 1.0 1.2 1.4 1.7 1.9 2.3 2.6 3.2 3.6 114 120 103

3/8

l l l 17W .156 .063 1.2 1.4 1.7 2.0 2.3 2.8 3.2 3.9 4.4 114 120 103

l l l l l 20W .172 .094 1.5 1.7 2.0 2.4 2.8 3.3 3.8 4.6 5.2 114 120 104

l l l 24W .188 .094 1.7 2.0 2.4 2.9 3.3 4.0 4.5 5.5 6.2 114 120 104

l l l 27W .203 .109 2.0 2.3 2.7 3.3 3.7 4.5 5.1 6.2 7.0 114 120 106

1/2

l l l 30W .219 .109 2.2 2.5 3.0 3.6 4.1 5.0 5.7 6.8 7.8 114 120 108

l l l l l 35W .234 .125 2.5 3.0 3.5 4.2 4.8 5.8 6.6 8.0 9.1 114 120 108

l l l 40W .250 .125 2.9 3.4 4.0 4.8 5.5 6.6 7.6 9.1 10.4 114 120 108

l l l 45W .250 .141 3.3 3.8 4.5 5.4 6.2 7.5 8.5 10.3 11.7 114 120 110

l l l l l 50W .266 .156 3.6 4.2 5.0 6.0 6.9 8.3 9.5 11.4 13.0 114 120 112

3/4 l l 6W .391 .172 5.2 6.0 7.0 8.4 9.5 11.4 12.9 15.4 17.5 115 120 112

1 l l 11W .516 .219 9.5 11.0 12.9 15.4 17.5 21 24 28 32 117 120 117

1-1/4 l l 16W .609 .250 13.8 16.0 18.7 22 25 30 34 41 47 118 121 119

1-1/2 l l 24W .719 .406 21 24 28 34 38 46 52 62 70 119 124 119

2 l 47W .984 .438 41 47 55 66 75 89 101 121 137 120 124 119

2-1/2 l 70W 1.3 .563 60 70 82 98 111 133 151 180 204 120 125 119

3 l 95W 1.4 .688 82 95 111 133 151 180 205 244 277 120 125 119

4 l 188W 2.0 .813 162 188 220 263 298 357 405 484 549 120 125 119

Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 20: Scrubber Nozzle 32

B20

Fu

ll

Co

ne

No

zz

le

s

Angle Type NozzleType

InletConn.(in.)

A(in.)

B(in.)

C(in. sq.)

D(in.)

L(in.)

NetWeight

(oz.)

GA-W(F)

1/8 11/16 5/8 9/16 31/32 29/32 1-1/2

1/4 7/8 25/32 11/16 1-7/32 1-5/32 2

3/8 1 7/8 13/16 1-7/16 1-9/32 3-1/4

1/2 1-17/32 1-1/16 1 2-1/32 1-9/16 6-1/4

GGA-W(M)

1/8 11/16 21/32 9/16 31/32 15/16 1-1/2

1/4 7/8 13/16 11/16 1-1/4 1-5/32 2

3/8 1 29/32 13/16 1-7/16 1-5/16 3-1/4

1/2 1-17/32 1-1/8 1 2-1/32 1-5/8 6-1/4

Based on largest/heaviest version of each type.

Spray Nozzles, Wide Angle Spray

Standard NozzleType

InletConn.(in.)

Length(in.)

Dia.(in.)

Hex(in.)

NetWeight

(oz.)

G-W(F)

1/8 1-7/32 – 9/16 1

1/4 1-15/32 – 11/16 1-1/2

3/8 1-13/16 – 13/16 2-1/2

1/2 2-1/4 – 1 6

GG-W(M)

1/8 1-9/32 – 9/16 3/4

1/4 1-9/16 – 11/16 1-1/2

3/8 1-27/32 – 13/16 2-1/2

1/2 2-7/32 – 1 6

HH-W(M)

1/8 11/16 1/2 – 1/21/4 29/32 17/32 – 1/23/8 1-3/16 21/32 – 11/2 1-3/8 13/16 – 1-1/23/4 1-19/32 1-1/16 – 3-1/21 2-3/32 1-5/16 – 7

1-1/4 2-3/4 1-11/16 – 13-1/21-1/2 3-1/4 2 – 20

H-WBar

Stock(F)

3/4 2-3/16 1-1/4 – 7-1/4

1 2-3/4 1-1/2 – 13

H-WCast(F)

1-1/4 3-7/16 2-1/16 – 201-1/2 4-1/16 2-5/16 – 28

2 5-7/16 3 – 602-1/2 6-7/8 3-7/16 – 76

3 7-23/32 4-1/8 – 964 9-7/8 5-7/16 – 18 lbs.

H-WPoly(F)

1-1/2 4-7/32 2-11/32 – 2-1/2

2 5-7/16 2-13/16 – 4

Based on largest/heaviest version of each type.

Dimensions and Weights

Dimensions and Weights

Wide angle FullJet nozzles are mounted under scaffolding to

clean building exteriors.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 21: Scrubber Nozzle 32

B21

Full

Co

ne

no

zzle

s

Quick and ProMax® Quick FullJet Spray Nozzles, Wide Angle Spray

Features and Benefits

• Solid wide cone-shaped spray pattern with round impact area with spray angle of 120° at 10 psi (0.7 bar).

• Fast and easy installation of spray tips without tools.

• Automatic alignment.

• Lower cost – nozzle body can be reused – only spray tips are replaced.

• Removable caps and vanes for easy inspection and cleaning on some models.

• Non-removable vanes that contribute to uniform distribution across the impact area on some models.

– Nozzle body, spray tip with integral seal.• ProMax Quick FullJet spray nozzle assemblies:

– Nozzle body, spray tip and optional external O-ring.

• Standard Quick FullJet spray nozzle assemblies:

• ProMax QuickJet® provides increased chemical resistance and less build-up. Additional protection against contaminants in harsh environments is provided by internal O-ring seal and optional external O-ring. See chart for maximum pressures at various temperatures.

• ProMax Quick FullJet spray tips color-coded for easy flow rate identification.

Quick FullJet nozzles are comprised of two components, a body and a spray tip. QHA-W, QGA-W, QLHA-W and QLGA-W are the four spray tips available. Each of these four spray tips are compatible with either the male or female bodies.

Standard connectionNon-removable vane

Large connectionRemovable cap and vane

Standard connectionRemovable cap and vane

QGA-W QLGA-W

QHA-W

Large connectionNon-removable vane

QLHA-W

• QJA female and QJJA male inlet connections

• QJLA female and QJJLA male inlet connections

40 60 80 100 120 140 160 180 200 °F 4 16 27 38 49 60 71 82 93 °C

bar psi10.0 150

7.0 100

3.5 50

0 0

LIQUID TEMPERATURE

OPERATING REGION

PR

ES

SU

RE

ProMax QuickJet nozzle maximum pressures at various temperatures

Standard QuickJet Bodies

Spray tip

QJJA and QJJLA male bodies

QJA and QJLA female bodies or

Quick FullJet Spray Tips

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 22: Scrubber Nozzle 32

B22

Fu

ll

Co

ne

No

zz

le

s

Quick and ProMax® Quick FullJet Spray Nozzles, Wide Angle Spray

• See page B2 for optimization tips.

Optimization Tips

Quick FullJet complete Nozzle

Nozzle Body Spray tip

1/4 QJJa – SS + QHa – SS 8Wl l l l l l

InletConn.

BodyType

MaterialCode

TipType

MaterialCode

CapacitySize

promax Quick FullJet complete Nozzle WitHout exterNal o-riNg

Nozzle Body Spray tip

1/4 Qppa + QpHa – 14Wl l l l

InletConn.

BodyType

TipType

CapacitySize

promax Quick FullJet complete Nozzle WitH exterNal o-riNg

Nozzle Body Spray tip

3/8 Qppa + QpHa – 2.8Wl l l l

InletConn.

BodyType

TipType

CapacitySize

Ordering Info

BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.

ProMax Quick FullJet Spray Tips

QPHA-W

Applications

Standard Quick FullJet Spray Nozzles

• Cooling and rinsing

• Dust control

• Gas scrubbing, washing, cooling

• Product washing/rinsing

ProMax Quick FullJet Spray Nozzles• Chemical manufacturing

• Coating

• Cooling

• Food processing

• Metal finishing

• Parts washing/rinsing

• Printed circuit board manufacturing

See Also

– ProMax QuickJet nozzle adapters

– QuickJet adjustable ball fitting bodies

– QuickJet nozzle system adapters

– QuickJet nozzle system plugs

– QuickJet nozzle system plugs for ProMax bodies

– QuickJet split-eyelet bodies

– UniJet® nozzle system adapter for QuickJet systems

http://

• Accessories

ProMax QuickJet® Bodies

• QPPA male inlet connections ProMax Quick FullJet nozzles are comprised of two components, a body and a spray tip. Available tips are shown below. In addition, there is an optional 0-ring recommended for harsh environments.

QPPA nozzle body

Spray tipRed

QPHA-14W1.4 gpm

BlueQPHA-12W

1.2 gpm

YellowQPHA-10W

1.0 gpm

GreenQPHA-8W

.80 gpm

OrangeQPHA-5.6W

.56 gpm

BlackQPHA-4.3W

.43 gpm

WhiteQPHA-2.8W

.28 gpm

Capacities at 10 psi (0.7 bar)

O-Ring to be ordered separately.

Optional external O-ring (CP7717-2/17-VI)

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 23: Scrubber Nozzle 32

B23

Full

Co

ne

no

zzle

s

Quick and ProMax® Quick FullJet Spray Nozzles, Wide Angle Spray

*At the stated pressure in psi.

InletConn.(in.)

Quick FullJet Tip Type CapacitySize

OrificeDia.

Nom.(in.)

Max.Free

PassageDia.(in.)

Capacity(gallons per minute)*

SprayAngle

(°)*

QGA-W QLGA-W QHA-W QLHA-W QPHA-W 7 10 15 30 40 60 70 80 5 10 80

1/8, 1/4,3/8, 1/2

(QPHA 1/4,3/8 only)

l l l 2.8W .063 .040 – .28 .33 .45 .52 .62 .66 .70 – 120 102

l l 4.3W .078 .040 – .43 .51 .70 .79 .95 1.0 1.1 – 120 102

l l l 5.6W .094 .040 .48 .56 .67 .91 1.0 1.2 1.3 1.4 – 120 102

l l l 8W .094 .050 .68 .80 .96 1.3 1.5 1.8 1.9 2.0 – 120 103

1/4, 3/8, 1/2(QPHA 1/4,

3/8 only)

l l l 10W .109 .050 .85 1.0 1.2 1.6 1.8 2.2 2.4 2.5 112 120 103

l l l 12W .125 .050 1.0 1.2 1.4 1.9 2.2 2.6 2.8 3.0 114 120 103

l l l 14W .141 .063 1.2 1.4 1.7 2.3 2.6 3.1 3.3 3.5 114 120 103

3/8, 1/2

l 17W .156 .063 1.5 1.7 2.0 2.8 3.1 3.7 4.0 4.2 114 120 103

l l 20W .172 .094 1.7 2.0 2.4 3.2 3.7 4.4 4.7 5.0 114 120 104

l 24W .188 .094 2.1 2.4 2.9 3.9 4.4 5.3 5.7 6.0 114 120 104

l 27W .203 .109 2.3 2.7 3.2 4.4 5.0 5.9 6.4 6.7 114 120 106

1/2

l 30W .219 .109 2.6 3.0 3.6 4.9 5.5 6.6 7.1 7.5 114 120 108

l 35W .234 .125 3.0 3.5 4.2 5.7 6.4 7.7 8.2 8.7 114 120 108

l 40W .250 .125 3.4 4.0 4.8 6.5 7.4 8.8 9.4 10.0 114 120 108

l 45W .250 .141 3.8 4.5 5.4 7.3 8.3 9.9 10.6 11.2 114 120 110

l l 50W .266 .156 4.3 5.0 6.0 8.1 9.2 11.0 11.8 12.5 114 120 112

Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.

Performance Data

Materials

Material MaterialCode

Spray Tip

QGA-W QLGA-W QHA-W QLHA-W

Brass (none) l l l l

303 Stainless Steel SS l l l l

Standard Quick FullJet nozzles available in either brass with a Buna-N seal or stainless steel with a Viton® seal.

ProMax Quick FullJet nozzles available with a Viton seal.

Other materials available upon request.

Dimensions and Weights

Standard NozzleType

Length(in.)

Hex.(in.)

NetWeight

(oz.)

QJA+QGA-W 2-11/16 1 5-1/2

QJJA+QGA-W 2-5/8 7/8 4-1/2

QJLA+QLGA-W 3-5/32 1-1/8 8-1/2

QJJLA+QLGA-W 3-3/16 1-1/8 8-1/2

QJA+QHA-W 2-1/16 1 3-1/2

QJJA+QHA-W 1-31/32 1 3-1/2

QJLA+QLHA-W 2-7/16 1-1/8 5

QJJLA+QLHA-W 2-1/2 1-1/8 5

QPPA+QPHA-W 1-3/4 7/8 1/2

Based on largest/heaviest version of each type.

Body Types

InletConn.(in.)

Standard Body

Conn.F

Conn.M

QJA QJLA QJJA QJJLA QPPA

1/8 l l l

1/4 l l l

3/8 l l l l l

1/2 l l l l

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 24: Scrubber Nozzle 32

B24

Fu

ll

Co

ne

No

zz

le

s

Spray Nozzles, Wide Angle Spray

Features and Benefits

• Solid cone-shaped spray pattern with round impact area.

• Unique vane design with large flow passages provides superior control and uniform distribution.

• Quick and easy spray tip replacement – remove tips by unscrewing the retainer cap.

• Lower cost – nozzle body can be reused – only spray tips are replaced.

– With TG-W tip: nozzle body, screen strainer, tip, tip retainer.

– With TH-W tip: nozzle body, spray tip.

• A large choice of interchangeable spray tips, body types/sizes, materials and accessories.

• UniJet nozzle assemblies:

Standard UniJet Bodies UniJet Spray Tips

A typical UniJet assembly with TG-W tip will consist of a T female body or TT male body, screen strainer, spray tip and tip retainer. A typical UniJet assembly with TH-W tip will consist of a T female body or TT male body, spray tip and retainer. TH-W tips are designed so the spray tip serves as tip and retainer in one.

Spray tip only

TG-W TH-W

Spray tip and tip retainer in one

• T female and TT male inlet connections

Screen strainer

TT male body

T female body or

Spray tip

Tip retainer

Spray tip and retainer

TT male body

T female body or

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 25: Scrubber Nozzle 32

B25

Full

Co

ne

no

zzle

s

Spray Nozzles, Wide Angle Spray

Performance Data

See Also

• Accessories– Adjustable mounting clamp

nozzle bodies

– Ball valve nozzle bodies

– Check valves

– Plates, tip retainers, adapters

– Plug valve nozzle bodies

– Rollover nozzle bodies

– Split-eyelet bodies

– Strainers

– Swivel nozzle bodies

http://Optimization Tips

• See page B2 for optimization tips.

Applications

• Cooling of primary metals and other materials

• Creating and dispersing drops in chemical reaction processing

• Dust control

• Foam break-up, aeration, deaeration

• Gas scrubbing, washing, cooling

• Washing/rinsing

*At the stated pressure in psi.

BodyInlet

Conn.(in.)

UniJetTip Type Capacity

Size

OrificeDia.

Nom.(in.)

Max.Free

PassageDia.(in.)

Capacity(gallons per minute)*

SprayAngle

(°)*

TG-W TH-W 5 7 10 15 20 30 40 60 80 5 10 80

1/8, 1/4

l l 2.8W .063 .040 .20 .24 .28 .34 .39 .46 .53 .64 .73 – 120 102

l l 4.3W .078 .040 .31 .36 .43 .52 .59 .71 .81 .98 1.1 – 120 102

l l 5.6W .094 .040 .41 .48 .56 .67 .77 .93 1.1 1.3 1.5 – 120 102

l l 8W .094 .050 .58 .68 .80 .96 1.1 1.3 1.5 1.8 2.1 – 120 103

1/4

l l 10W .109 .050 .73 .85 1.0 1.2 1.4 1.7 1.9 2.3 2.6 112 120 103

l 12W .125 .050 .87 1.0 1.2 1.4 1.7 2.0 2.3 2.7 3.1 114 120 103

l l 14W .141 .063 1.0 1.2 1.4 1.7 1.9 2.3 2.6 3.2 3.6 114 120 103

3/8

l 17W .156 .063 1.2 1.4 1.7 2.0 2.3 2.8 3.2 3.9 4.4 114 120 103

l 20W .172 .094 1.5 1.7 2.0 2.4 2.8 3.3 3.8 4.6 5.2 114 120 104

l 24W .188 .094 1.7 2.0 2.4 2.9 3.3 4.0 4.5 5.5 6.2 114 120 104

l 27W .203 .109 2.0 2.3 2.7 3.3 3.7 4.5 5.1 6.2 7.0 114 120 106

1/2l 30W .219 .109 2.2 2.5 3.0 3.6 4.1 5.0 5.7 6.8 7.8 114 120 108

l 35W .234 .125 2.5 3.0 3.5 4.2 4.8 5.8 6.6 8.0 9.1 114 120 108

Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.

Other body types may be available. Contact representative for further information.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 26: Scrubber Nozzle 32

B26

Fu

ll

Co

ne

No

zz

le

s

Spray Nozzles, Wide Angle Spray

Dimensions and Weights Materials

Material MaterialCode

Spray Tip

TG-W TH-W

Brass (none) l l

303 Stainless Steel SS l l

Other materials available upon request.

Mesh Selection Guide

OrificeDia.

in. (mm)

RecommendedScreenMesh

Up through.018 (.46) 200

.019 (.47)through.031 (.79)

100

.032 (.80)and larger 50

Ordering Info

UniJet Complete nozzle

nozzle Body Spray tip

1/4 t – SS + tG – SS 14Wl l l l l l

InletConn.

BodyType

MaterialCode

TipType

MaterialCode

CapacitySize

BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.

UniJet spray nozzles used to melt ice and wash condensing coils in instant coffee production.

Standard NozzleType

Length(in.)

Hex.(in.)

NetWeight

(oz.)

T+TG-WTT+TG-W 2-7/32 13/16 3

T+TH-WTT+TH-W 2-7/32 13/16 3

Based on largest/heaviest version of each type.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 27: Scrubber Nozzle 32

B27

Full

Co

ne

no

zzle

s

Removable cap and vane1/8" to 3/4" NPT or BSPT (M)

Removable cap and vane1/8" to 3/4" NPT or BSPT (F)

Removable cap and vane1/8" to 1/2" NPT or BSPT (M)

Removable cap and vane1/8" to 1/2" NPT or BSPT (F)

One-piece bodyRemovable vane

1" to 2-1/2" NPT or BSPT (M)

Two-piece cast bodyRemovable vane

4" to 5" NPT or BSPT (F)

One-piece bodyRemovable vane

3/4" to 3" NPT or BSPT (F)

H-15 H-15 HH-30

G-15 GG-15

See Also http://

G-30 GG-30

Spray Nozzles, Narrow Angle Spray 15°/30°

• See page B2 for optimization tips.

Optimization Tips

• Cleaning and washing that requires deep penetration and/or spray induced turbulence

• Cooling and cleaning the inside of ducts and pipes

• Desuperheating of steam

Applications

• Solid narrow angle cone-shaped spray pattern with round impact area and spray angles of 15° and 30° at 40 psi (2.8 bar).

• Significantly higher impact per unit area than wider angle nozzles at the same flow rate.

• Unique vane design with large flow passages provides superior control and uniform distribution.

• Removable caps and vanes for easy inspection and cleaning on many models.

Features and Benefits

• Accessories– Adjustable ball fittings

– Check valves

– Pressure gauges

– Pressure regulators

– Pressure relief valves

– Solenoid valves

– Split-eyelet connectors

– Strainers

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 28: Scrubber Nozzle 32

B28

Fu

ll

Co

ne

No

zz

le

s

Spray Nozzles, Narrow Angle Spray 15°/30°

Performance Data

*At the stated pressure in psi.

InletConn.(in.)

Nozzle Type CapacitySize

OrificeDia.

Nom.(in.)

Capacity(gallons per minute)*

SprayAngle

(°)*

G-15 GG-15 H-15 10 20 30 40 60 80 100 150 200 300 10 40 100

1/8l l 1507 .063 .35 .49 .61 .70 .86 .99 1.1 1.4 1.6 1.9 13 15 15

l l 1514 .094 .70 .99 1.2 1.4 1.7 2.0 2.2 2.7 3.1 3.8 13 15 15

1/4 l l 1530 .125 1.5 2.1 2.6 3.0 3.7 4.2 4.7 5.8 6.7 8.2 13 15 15

3/8 l l 1550 .172 2.5 3.5 4.3 5.0 6.1 7.1 7.9 9.7 11.2 13.7 13 15 15

1/2 l l 1590 .219 4.5 6.4 7.8 9.0 11.0 12.7 14.2 17.4 20 25 13 15 15

3/4 l 15150 .297 7.5 10.6 13.0 15.0 18.4 21 24 29 34 41 13 15 15

1 l 15280 .391 14.0 19.8 24 28 34 40 44 54 63 77 13 15 15

1-1/4 l 15430 .484 22 30 37 43 53 61 68 83 96 118 14 15 15

1-1/2 l 15630 .594 32 45 55 63 77 89 100 122 141 173 14 15 15

2 l 151150 .797 58 81 100 115 141 163 182 223 257 315 14 15 15

2-1/2 l 151750 .969 88 124 152 175 214 247 277 339 391 479 14 15 15

3 l 152500 1.156 125 177 217 250 306 354 395 484 559 685 14 15 15

4 l 154500 1.141 225 318 390 450 551 636 712 871 1006 1232 14 15 15

5 l 157000 1.922 350 495 606 700 857 990 1107 1356 1565 1917 14 15 15

*At the stated pressure in psi.

InletConn.(in.)

Nozzle Type CapacitySize

OrificeDia.

Nom.(in.)

Capacity(gallons per minute)*

SprayAngle

(°)*

G-30 GG-30 HH-30 15 20 30 40 60 80 100 150 200 300 15 40 100

1/8

l l 3001.4 .031 .086 .099 .12 .14 .17 .20 .22 .27 .31 .38 17 30 31

l l 3002.5 .031 .15 .18 .22 .25 .31 .35 .40 .48 .56 .68 17 30 32

l l 3004 .047 .24 .28 .35 .40 .49 .57 .63 .77 .89 1.1 26 30 32

l l 3007 .063 .43 .49 .61 .70 .86 .99 1.1 1.4 1.6 1.9 23 30 30

1/4 l l 3009 .078 .55 .64 .78 .90 1.1 1.3 1.4 1.7 2.0 2.5 23 30 30

3/8 l l 3014 .094 .86 .99 1.2 1.4 1.7 2.0 2.2 2.7 3.1 3.8 25 30 30

1/2 l l 3030 .125 1.8 2.1 2.6 3.0 3.7 4.2 4.7 5.8 6.7 8.2 26 30 31

3/4 l l 3050 .172 3.1 3.5 4.3 5.0 6.1 7.1 7.9 9.7 11.2 13.7 26 30 31

1l 3070 .203 4.3 4.9 6.1 7.0 8.6 9.9 11.1 13.6 15.7 19.2 27 30 30

l 30100 .250 6.1 7.1 8.7 10.0 12.2 14.1 15.8 19.4 22 27 27 30 30

1-1/4l 30150 .297 9.2 10.6 13.0 15.0 18.4 21 24 29 34 41 27 30 30

l 30200 .344 12.2 14.1 17.3 20 24 28 32 39 45 55 27 30 30

1-1/2l 30250 .375 15.3 17.7 22 25 31 35 40 48 56 68 27 30 30

l 30300 .406 18.4 21 26 30 37 42 47 58 67 82 27 30 30

2

l 30350 .438 21 25 30 35 43 49 55 68 78 96 28 30 30

l 30400 .469 24 28 35 40 49 57 63 77 89 110 28 30 30

l 30500 .531 31 35 43 50 61 71 79 97 112 137 28 30 30

2-1/2

l 30600 .578 37 42 52 60 73 85 95 116 134 164 28 30 30

l 30700 .625 43 49 61 70 86 99 111 136 157 192 28 30 30

l 301000 .750 61 71 87 100 122 141 158 194 224 274 28 30 30

l 301100 .781 67 78 95 110 135 156 174 213 246 301 28 30 30

l 301200 .813 73 85 104 120 147 170 190 232 268 329 28 30 30

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 29: Scrubber Nozzle 32

B29

Full

Co

ne

no

zzle

s

Materials

Material MaterialCode

Nozzle Type

G-15 GG-15 G-30 GG-30 H-15 HH-30

Bar Stock:

Brass (none) l l l l l

303 Stainless Steel SS l l l l l l

Cast:

Brass (none) l l l l

316 Stainless Steel/303 Caps SS l l l l

Other materials available upon request.

Dimensions and Weights

Standard NozzleType

InletConn.(in.)

Length(in.)

Dia.(in.)

Hex.(in.)

NetWeight

(oz.)

G-15(F)

1/8 1-13/32 – 11/16 2

1/4 1-11/16 – 13/16 3

3/8 2-1/8 – 1 6

1/2 2-5/8 – 1-1/4 11

GG-15(M)

1/8 1-17/32 – 11/16 2

1/4 1-25/32 – 13/16 3

3/8 2-3/16 – 1 6

1/2 2-3/4 – 1-1/4 11

G-30(F)

1/8 1-13/32 – 11/16 2

1/4 1-11/16 – 13/16 3

3/8 2-1/8 – 1 6

1/2 2-5/8 – 1-1/4 11

3/4 3-5/16 – 1-1/2 20

GG-30(M)

1/8 1-17/32 – 11/16 2

1/4 1-25/32 – 13/16 3

3/8 2-3/16 – 1 6

1/2 2-3/4 – 1-1/4 11

3/4 3-7/16 – 1-1/2 20

H-15Bar Stock

(F)

3/4 2-27/32 1-1/4 – 15

1 3-5/8 1-1/2 – 20

1-1/4 4-5/8 1-7/8 – 40

H-15Cast(F)

1-1/2 5 2-5/16 – 48

2 7-7/32 3 – 64

2-1/2 9-3/16 3-7/16 – 6-1/2 lbs.

3 10-9/16 4-1/8 – 9-1/2 lbs.

4 13-5/16 5-7/16 – 20 lbs.

5 16-7/8 6-3/4 – 36 lbs.

HH-30(M)

1 3-5/8 1-15/16 – 20

1-1/4 5 1-11/16 – 36

1-1/2 6-3/32 1-7/8 – 52

2 7-7/8 2-3/8 – 7-3/8 lbs.

2-1/2 10-3/8 2-7/8 – 12 lbs.

Based on largest/heaviest version of each type.

Standard Spray nozzle

1/4 G – SS 1530l l l l

InletConn.

NozzleType

MaterialCode

CapacitySize

1/2 GG – SS 3030l l l l

InletConn.

NozzleType

MaterialCode

CapacitySize

BSPT connections require the addition of a “B” prior to the inlet connection.

Ordering Info

Spray Nozzles, Narrow Angle Spray 15°/30°

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 30: Scrubber Nozzle 32

B30

Fu

ll

Co

ne

No

zz

le

s

Quick Spray Nozzles, Narrow Angle Spray 15°/30°

Quick FullJet Spray Tips

Quick FullJet nozzles are comprised of two components, a body and a spray tip. QGA-15, QGA-30, QLGA-15 and QLGA-30 are the four spray tips available. Each of these four spray tips are compatible with either the male or female bodies.

Removable cap and vane

QGA-15 QLGA-15

Removable cap and vaneLarge connection

Removable cap and vane

QGA-30

Removable cap and vaneLarge connection

QLGA-30

See Also

• Accessories– QuickJet adjustable ball fitting bodies

– QuickJet nozzle system adapters

– QuickJet nozzle system plugs

– QuickJet split-eyelet bodies

– UniJet® nozzle system adapter for QuickJet systems

http://Optimization Tips

• See page B2 for optimization tips.

• Cleaning and washing that requires deep penetration and/or spray induced turbulence

• Cooling/cleaning the inside of ducts/pipes

• Desuperheating of steam

Applications

• Solid narrow cone-shaped spray pattern with round impact area and spray angles of 15° and 30° at 40 psi (2.8 bar).

• Fast and easy installation of spray tips without tools.

• Automatic alignment.

• Lower cost – nozzle body can be reused – only spray tips are replaced.

• Removable caps and vanes for easy inspection and cleaning.

Features and Benefits

• QJA female and QJJA male inlet connections

• QJLA female and QJJLA male inlet connections

Standard QuickJet® Bodies

Spray tip

QJJA and QJJLA male bodies

QJA and QJLA female bodies or

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 31: Scrubber Nozzle 32

B31

Full

Co

ne

no

zzle

s

Standard NozzleType

Length(in.)

Hex.(in.)

NetWeight

(oz.)

QJA+QGA 2-3/4 1 5

QJJA+QGA 2-21/32 7/8 4-1/2

QJLA+QLGA 3-5/16 1-1/8 9

QJJLA+QLGA 3-3/8 1-1/8 9

Based on largest/heaviest version of each type.

Quick Spray Nozzles, Narrow Angle Spray 15°/30°

*At the stated pressure in psi.

BodyInlet

Conn.(in.)

QuickFullJet

Tip TypeCapacity

Size

OrificeDia.

Nom.(in.)

Capacity(gallons per minute)*

SprayAngle

(°)*

QGA-30 QLGA-30 15 20 30 40 60 80 100 150 200 300 15 40 100

1/8, 1/4,3/8, 1/2

l 3001.4 .031 .086 .099 .12 .14 .17 .20 .22 .27 .31 .38 17 30 31l 3002.5 .031 .15 .18 .22 .25 .31 .35 .40 .48 .56 .68 17 30 32l 3004 .047 .24 .28 .35 .40 .49 .57 .63 .77 .89 1.1 26 30 32l 3007 .063 .43 .49 .61 .70 .86 .99 1.1 1.4 1.6 1.9 23 30 30

1/4, 3/8, 1/2 l 3009 .078 .55 .64 .78 .90 1.1 1.3 1.4 1.7 2.0 2.5 23 30 303/8, 1/2 l 3014 .094 .86 .99 1.2 1.4 1.7 2.0 2.2 2.7 3.1 3.8 25 30 30

Performance Data

*At the stated pressure in psi.

BodyInlet

Conn.(in.)

QuickFullJet

Tip TypeCapacity

Size

OrificeDia.

Nom.(in.)

Capacity(gallons per minute)*

SprayAngle

(°)*

QGA-15 QLGA-15 10 20 30 40 60 80 100 150 200 300 10 40 100

1/8, 1/4,3/8, 1/2

l 1507 .063 .35 .49 .61 .70 .86 .99 1.1 1.4 1.6 1.9 13 15 15l 1514 .094 .70 .99 1.2 1.4 1.7 2.0 2.2 2.7 3.1 3.8 13 15 15

1/4, 3/8, 1/2 l 1530 .125 1.5 2.1 2.6 3.0 3.7 4.2 4.7 5.8 6.7 8.2 13 15 153/8, 1/2 l 1550 .172 2.5 3.5 4.3 5.0 6.1 7.1 7.9 9.7 11.2 13.7 13 15 15

1/2 l 1590 .219 4.5 6.4 7.8 9.0 11.0 12.7 14.2 17.4 20 25 13 15 15

Quick FullJet complete Nozzle

Nozzle Body Spray tip

1/4 QJa – SS + QGa – SS 1507l l l l l l

InletConn.

BodyType

MaterialCode

TipType

MaterialCode

CapacitySize

Nozzle Body Spray tip

1/2 QJla – SS + QlGa – SS 3014l l l l l l

InletConn.

BodyType

MaterialCode

TipType

MaterialCode

CapacitySize

Ordering Info

BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.

Material MaterialCode

Spray Tip

QGA QLGA

Brass (none) l l

303 Stainless Steel SS l l

Other materials available upon request.

Materials

InletConn.(in.)

Standard Body

Conn. F Conn. M

QJA QJLA QJJA QJJLA

1/8 l l

1/4 l l

3/8 l l l l

1/2 l l l l

Body TypesDimensions and Weights

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 32: Scrubber Nozzle 32

B32

Fu

ll

Co

ne

No

zz

le

s

• See page B2 for optimization tips.

Optimization Tips

HHSJX

Threaded/flatsCast 316 Stainless Steel

3/8" to 2" NPT or BSPT (M)

HHSJX

Threaded/hexBrass

3/8" to 2" NPT or BSPT (M)

HHSJX

Threaded/roundPVC or Polypropylene

3/8" to 2" NPT or BSPT (M)

HHSJ

Threaded/roundPVC or PTFE

1/4" to 4" NPT or BSPT (M)

HHSJ

Threaded/hexBrass or 316 Stainless Steel1/4" to 2" NPT or BSPT (M)

HHSJ

Threaded/flatsCast 316 Stainless Steel

1/4" to 4" NPT or BSPT (M)

• Solid cone-shaped spray pattern with round impact area.

• Maximum liquid throughput for a given pipe size.

• Maximum free passage design minimizes clogging on HHSJX.

• Compact size enables easy installation or retrofit on most pipe systems.

Features and Benefits

• Aerating

• Chemical processing

• Fire suppression/prevention

Applications

• Gas scrubbing, cooling

• Washing/rinsing

See Also http://

• Accessories– Adjustable ball fittings

– Check valves

– Pressure gauges

– Pressure regulators

– Pressure relief valves

– Solenoid valves

– Split-eyelet connectors

– Strainers

Spray Nozzles, Standard and Extra Large Free Passage Spray

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 33: Scrubber Nozzle 32

B33

Full

Co

ne

no

zzle

s

Spray Nozzles, Standard and Extra Large Free Passage Spray

Performance Data

*At the stated pressure in psi.

InletConn.(in.)

Spray Angleat 10 psi

(°)Capacity

Size

OrificeDia.

Nom.(in.)

Max.Free

PassageDia.(in.)

Capacity(gallons per minute)*

60 90 120 150 170 10 20 40 100 400

1/4l l l 07 .094 .094 .70 .99 1.4 2.2 4.4l l l l l 13 .125 .125 1.3 1.8 2.6 4.1 8.2l l l l l 20 .156 .125 2.0 2.8 4.0 6.3 12.6

3/8

l 07 .094 .094 .70 .99 1.4 2.2 4.4l 13 .125 .125 1.3 1.8 2.6 4.1 8.2l 20 .156 .125 2.0 2.8 4.0 6.3 12.6l l l l l 30 .188 .125 3.0 4.2 6.0 9.5 19.0l l l l l 40 .219 .125 4.0 5.7 8.0 12.6 25l l l l l 53 .250 .125 5.3 7.5 10.6 16.8 34l l l l l 82 .313 .125 8.2 11.6 16.4 26 52

1/2l l l l l 120 .375 .188 12.0 17.0 24 38 76l l l l l 164 .438 .188 16.4 23 33 52 104

l 210 .500 .188 21 30 42 66 1333/4 l l l l l 210 .500 .188 21 30 42 66 133

1l l l l l 340 .625 .250 34 48 68 108 215l l l l l 470 .750 .250 47 66 94 149 297

1-1/2l l l l l 640 .875 .313 64 91 128 202 405l l l l l 820 1.000 .313 82 116 164 259 519l l l l l 960 1.125 .313 96 136 192 304 607

2l l l l l 1400 1.375 .438 140 198 280 443 885l l l l l 1780 1.500 .438 178 252 356 563 1126

3l l l 2560 1.750 .563 256 362 512 810 1619l l l 3360 2.000 .563 336 475 672 1063 2125

4 l l l 5250 2.500 .625 525 742 1050 1660 3320

HHSJ

*At the stated pressure in psi.

InletConn.(in.)

Spray Angleat 10 psi

(°)Capacity

Size

OrificeDia.

Nom.(in.)

Max.Free

PassageDia.(in.)

Capacity(gallons per minute)*

90 120 10 20 40 100 400

3/8

l l 30 .188 .188 3.0 4.2 6.0 9.5 19.0l l 40 .219 .219 4.0 5.7 8.0 12.6 25l l 53 .250 .250 5.3 7.5 10.6 16.8 34l l 82 .313 .313 8.2 11.6 16.4 26 52

1/2l l 120 .375 .375 12.0 17.0 24 38 76l l 164 .438 .438 16.4 23 33 52 104

3/4 l l 210 .500 .500 21 30 42 66 133

1l l 340 .625 .625 34 48 68 108 215l l 470 .750 .750 47 66 94 149 297

1-1/2l l 640 .875 .875 64 91 128 202 405l l 820 1.000 1.000 82 116 164 259 519l l 960 1.125 1.125 96 136 192 304 607

2l l 1400 1.375 1.375 140 198 280 443 885l l 1780 1.500 1.500 178 252 356 563 1126

HHSJX

Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 34: Scrubber Nozzle 32

B34

Fu

ll

Co

ne

No

zz

le

s

Standard NozzleType

InletConn.(in.)

Length(in.)

Hex.(in.)

NetWeight

(oz.)

HHSJ(M)

1/4 2-1/8 9/16 1

3/8 2-3/8 11/16 1-3/4

1/2 3-1/8 7/8 3-1/2

3/4 3-7/16 1-1/16 5-3/8

1 4-9/16 1-3/8 10

1-1/2 6-3/4 2 27

2 6-7/8 2-1/2 35

3 11-7/8 3-3/4 92

4 9 4-1/2 10-1/4 lbs.

HHSJX(M)

3/8 2-3/4 7/8 3

1/2 3-3/8 1-1/16 4-1/2

3/4 4-5/8 1-3/8 8

1 5-1/8 1-3/4 18

1-1/2 6-3/4 2 30

2 11 3 88

Based on largest/heaviest version of each type.

Dimensions and Weights

Material MaterialCode

Nozzle Type

HHSJ HHSJX

Bar Stock:

Brass (none) l l

Polypropylene PP l

Polyvinyl Chloride PVC l l

PTFE TEF l

Cast:

316 Stainless Steel SS l l

Other materials available upon request.

Materials

Ordering Info

Standard Spray nozzle

1/4 HHSJ – SS 120 07l l l l l

InletConn.

NozzleType

MaterialCode

SprayAngle

CapacitySize

3/8 HHSJX – SS 120 30l l l l l

InletConn.

NozzleType

MaterialCode

SprayAngle

CapacitySize

BSPT connections require the addition of a “B” prior to the inlet connection.

Spray Nozzles, Standard and Extra Large Free Passage Spray

SpiralJet spray nozzles used to rinse wire coils in pickling line.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 35: Scrubber Nozzle 32

B35

Full

Co

ne

no

zzle

s

RR RFR

2" to 8" NPT or BSPT (F)(80°/95° orifice shown)

4" to 12" sizesFlange connection

2" to 8" NPT or BSPT (M)(50°/65° orifice shown)

Spray Nozzles, Extra Large

• Solid cone-shaped spray pattern with round impact area and spray angles from 50° to 95° at 3 psi (0.2 bar).

• Utilizes an internal vane that is cast as part of the nozzle.

• Extra-large flow passages and a large open orifice to assure non-clogging operation.

• Allows an operating range of 1 to 60 psi (0.1 to 4 bar) with a full cone spray pattern developing at 1 psi (0.1 bar).

• 50° and 65° series have specially designed grooved orifices for accurate flow rates and spray angle control with their narrow sprays. (These grooves are not necessary for the 80° and 95° series, which have smooth orifices with somewhat larger diameters for the same flow rate.)

Features and Benefits

Free Passage Spray 50°/65°/80°/95°

• Chemical processing

• Cooling/quenching

• Deaeration

• Deluging or flooding with large volumes of liquid

• Fire suppression/prevention

Applications

• See page B2 for optimization tips.

Optimization Tips See Also http://

– Pressure gauges

– Strainers

• Accessories

DistriboJet spray nozzles used in wash station to clean fruit prior to processing.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 36: Scrubber Nozzle 32

B36

Fu

ll

Co

ne

No

zz

le

s Performance Data

Spray Nozzles, Extra Large Free Passage Spray 50°/65°/80°/95°

*At the stated pressure in psi.

InletConn.(in.)

Nozzle Type

CapacitySize

InnerOrifice

Dia.Nom.(in.)

OrificeDia.

Nom.(in.)

Capacity(gallons per minute)*R RR RF

Spray Angle

50° 65° 80° 95° 50° 65° 80° 95° 50° 65° 80° 95° 1 3 5 7 10 15 20 30 40 60

2

l l 45 1.0 – 27 45 57 66 78 94 108 130 148 179

l l 45 1.063 – 27 45 57 66 78 94 108 130 148 179

l l 45 – 1.141 27 45 57 66 78 94 108 130 148 179

l l 60 1.266 – 36 60 76 89 104 126 144 173 198 238

l l 60 – 1.422 36 60 76 89 104 126 144 173 198 238

2-1/2

l l 70 1.234 – 42 70 89 103 122 147 168 202 230 278

l l 70 1.344 – 42 70 89 103 122 147 168 202 230 278

l l 70 – 1.438 42 70 89 103 122 147 168 202 230 278

l l 90 1.563 – 54 90 114 133 157 189 215 260 296 357

l l 90 – 1.766 54 90 114 133 157 189 215 260 296 357

3

l l 110 1.547 – 66 110 139 162 191 231 263 317 362 436

l l 110 1.672 – 66 110 139 162 191 231 263 317 362 436

l l 110 – 1.828 66 110 139 162 191 231 263 317 362 436

l l 140 1.969 – 84 140 177 207 244 294 335 404 461 555

l l 140 – 2.250 84 140 177 207 244 294 335 404 461 555

4

l l l 160 1.875 – 97 160 202 236 278 335 383 461 527 635

l l l 160 2.016 – 97 160 202 236 278 335 383 461 527 635

l l l 160 – 2.125 97 160 202 236 278 335 383 461 527 635

l l l 190 2.047 – 115 190 240 281 331 398 455 548 625 754

l l l 190 2.203 – 115 190 240 281 331 398 455 548 625 754

l l l 190 – 2.375 115 190 240 281 331 398 455 548 625 754

l l l 250 2.625 – 151 250 316 369 435 524 598 721 823 992

l l l 250 – 3.016 151 250 316 369 435 524 598 721 823 992

5

l l l 250 2.359 – 151 250 316 369 435 524 598 721 823 992

l l l 250 2.516 – 151 250 316 369 435 524 598 721 823 992

l l l 250 – 2.656 151 250 316 369 435 524 598 721 823 992

l l l 280 2.469 – 169 280 354 413 487 587 670 808 922 1111

l l l 280 2.656 – 169 280 354 413 487 587 670 808 922 1111

l l l 280 – 2.859 169 280 354 413 487 587 670 808 922 1111

l l l 380 3.219 – 229 380 481 561 661 797 909 1096 1251 1508

l l l 380 – 3.656 229 380 481 561 661 797 909 1096 1251 1508

6

l l l 360 2.828 – 217 360 455 532 626 755 862 1038 1185 1428

l l l 360 3.016 – 217 360 455 532 626 755 862 1038 1185 1428

l l l 360 – 3.188 217 360 455 532 626 755 862 1038 1185 1428

l l l 400 2.969 – 241 400 506 591 696 839 957 1154 1317 1587

l l l 400 3.188 – 241 400 506 591 696 839 957 1154 1317 1587

l l l 400 – 3.406 241 400 506 591 696 839 957 1154 1317 1587

l l l 560 3.922 – 338 560 708 827 974 1174 1340 1615 1844 2222

l l l 560 – 5.500 338 560 708 827 974 1174 1340 1615 1844 2222

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 37: Scrubber Nozzle 32

B37

Full

Co

ne

no

zzle

s

Standard NozzleType

InletConn.(in.)

Length(in.)

Dia.(in.)

NetWeight

(oz.)

R(F)

2 4-7/16 2-15/16 482-1/2 5-15/32 3-15/32 88

3 6-1/2 4-1/8 7-1/2 lbs.4 8-1/8 5 13-1/2 lbs.5 10-1/32 6-3/8 33 lbs.6 11-13/16 7-5/8 38-1/2 lbs.8 15-5/16 9-1/2 75 lbs.

RR(M)

2 3-1/4 2-3/8 322-1/2 4 2-7/8 84

3 4-7/8 3-1/2 924 6-1/2 4-1/2 10 lbs.5 8-1/8 5-9/16 25 lbs.6 9-3/4 6-5/8 29 lbs.8 13 8-5/8 56 lbs.

RF(Flange)

4 6-9/16 8-7/8 23 lbs.5 8-13/16 9-7/8 39 lbs.6 9-13/16 10-7/8 45 lbs.8 13 13-3/8 85 lbs.12 19-1/2 19 110 lbs.

Based on largest/heaviest version of each type.

Dimensions and Weights

Spray Nozzles, Extra Large

Performance Data

*At the stated pressure in psi.

InletConn.(in.)

Nozzle Type

CapacitySize

InnerOrifice

Dia.Nom.(in.)

OrificeDia.

Nom.(in.)

Capacity(gallons per minute)*R RR RF

Spray Angle

50° 65° 80° 95° 50° 65° 80° 95° 50° 65° 80° 95° 1 3 5 7 10 15 20 30 40 60

8

l l l 650 3.797 – 392 650 822 960 1131 1363 1556 1875 2140 2579

l l l 650 4.063 – 392 650 822 960 1131 1363 1556 1875 2140 2579

l l l 650 – 4.344 392 650 822 960 1131 1363 1556 1875 2140 2579

l l l 750 4.047 – 452 750 949 1107 1305 1572 1795 2163 2469 2975

l l l 750 4.406 – 452 750 949 1107 1305 1572 1795 2163 2469 2975

l l l 750 – 4.781 452 750 949 1107 1305 1572 1795 2163 2469 2975

l l l 850 4.750 – 513 850 1075 1255 1479 1782 2034 2451 2798 3372

l l l 850 – 5.313 513 850 1075 1255 1479 1782 2034 2451 2798 3372

l l l 1000 – 6.250 603 1000 1265 1477 1740 2097 2393 2884 3292 3967

12

l 1400 – 6.297 845 1400 1771 2067 2436 2935 3351 4038 4609 5554

l 1600 – 6.859 965 1600 2024 2363 2784 3355 3829 4614 5267 6347

l 1700 – 7.188 1026 1700 2150 2510 2958 3564 4069 4903 5597 6744

l 1800 – 7.516 1086 1800 2277 2658 3132 3774 4308 5191 5926 7141

l 2000 – 8.219 1207 2000 2530 2953 3480 4193 4787 5768 6584 7934

l 2200 – 9.047 1327 2200 2783 3249 3828 4613 5265 6345 7243 8728

Material MaterialCode

Nozzle Type

R RR RF

Brass (none) l l l

Cast Iron l l l l

316 Stainless Steel SS l l l

Other materials available upon request.

Materials

Ordering Info

Standard Spray nozzle

2 rr – SS 50 45l l l l l

InletConn.

NozzleType

MaterialCode

SprayAngle

CapacitySize

BSPT connections require the addition of a “B” prior to the inlet connection.

Free Passage Spray 50°/65°/80°/95°

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 38: Scrubber Nozzle 32

B38

Fu

ll

Co

ne

No

zz

le

s

Material Material Code

Nozzle Type

HMFP HHMFP

Brass (none) l l

316 Stainless Steel SS l l

Other materials available upon request.

Materials

3/8" to 1-1/4" NPT or BSPT (F)

HMFP

3/8" to 1-1/4" NPT or BSPT (M)

HHMFP

• See page B2 for optimization tips.

Optimization Tips

Spray Nozzles,

• Solid cone-shaped spray pattern with round impact area.

• Patented vane design provides the largest free passage of any spray nozzle of its type.

• Uniform full cone spray across the entire spray coverage area – no thick edges and light centers.

Features and Benefits

See Also

Ordering Info

http://

– Adjustable ball fittings

– Check valves

– Pressure gauges

– Pressure regulators

– Pressure relief valves

– Solenoid valves

– Split-eyelet connectors

– Strainers• Aerating waste water treatment

• Cooling

• Dust control

Applications

• Fire suppression/prevention

• Gas scrubbing

• Washing coal, sand, gravel

Standard Spray nozzle

3/4 HHMFp – SS 90 70l l l l l

Inlet Conn.

Nozzle Type

Material Code

Spray Angle

Capacity Size

BSPT connections require the addition of a “B” prior to the inlet connection.

Maximum Free Passage Spray

• Accessories

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 39: Scrubber Nozzle 32

B39

Full

Co

ne

no

zzle

s

Spray Nozzles, Maximum Free Passage Spray

Performance Data

*At the stated pressure in psi.

InletConn.(in.)

BodyStyle

A or B

NozzleType Capacity

Size

Max.Free

PassageDia.(in.)

Capacity(gallons per minute)*

SprayAngle (°)*

60° Series 90° Series 115° Series

HMFP HHMFP 10 20 30 40 60 80 20 40 20 40 20 40

3/8

A l l 14 .125 1.4 1.8 2.2 2.4 2.9 3.2 64 62 90 84 112 100

A l l 22 .156 2.2 2.9 3.4 3.8 4.5 5.1 64 62 90 84 112 100

B l l 32 .188 3.2 4.2 5.0 5.6 6.6 7.4 64 62 90 84 112 100

1/2

A l l 32 .188 3.2 4.2 5.0 5.6 6.6 7.4 64 62 90 84 112 100

B l l 51 .219 5.1 6.7 7.9 8.9 10.4 11.7 64 62 90 84 112 100

B l l 57 .250 5.7 7.5 8.8 9.9 11.7 13.1 64 62 90 84 112 100

3/4

A l l 70 .281 7.0 9.2 10.9 12.2 14.3 16.1 64 62 90 84 112 100

B l l 84 .313 8.4 11.1 13.0 14.6 17.2 19.3 64 62 90 84 112 100

B l l 100 .344 10.0 13.2 15.5 17.4 20 23 64 62 90 84 112 100

B l l 120 .375 12.0 15.8 18.6 21 25 28 64 62 90 84 112 100

1

B l l 120 .375 12.0 15.8 18.6 21 25 28 64 62 90 84 112 100

B l l 150 .406 15.0 19.5 23 25 30 33 64 62 90 88 115 105

B l l 170 .437 17.0 22 26 29 34 37 64 62 90 88 115 105

1-1/4

B l l 170 .437 17.0 22 26 29 34 37 64 62 90 88 115 105

B l l 200 .469 20 26 30 34 40 44 64 62 90 88 115 105

B l l 220 .500 22 29 33 37 43 48 64 62 90 88 115 105

B l l 240 .531 24 31 36 41 47 53 64 62 90 88 115 105

B l l 260 .562 26 34 39 44 51 57 64 62 90 88 115 105

Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.

Dimensions and Weights

Standard NozzleType

InletConn.(in.)

BodyStyle

Length(in.)

Hex.(in.)

NetWeight

(oz.)

HHMFP(M)

3/8 A 1 11/16 1-3/8

3/8 B 1-45/64 3/4 2

1/2 A 1-7/32 7/8 2-3/8

1/2 B 2-3/16 1 4-7/8

3/4 A 1-7/32 1-1/8 5

3/4 B 2-45/64 1-3/8 11-1/2

3/4 B 2-31/32 1-3/8 12-1/8

3/4 B 3-1/16 1-3/8 11-1/2

1 B 3-1/4 1-3/4 22-1/2

1 B 3-1/4 1-3/4 19-1/4

1 B 3-1/4 1-3/4 19-1/4

1-1/4 B 3-3/4 2 32

1-1/4 B 3-3/4 2 27-1/4

1-1/4 B 3-3/4 2 27-1/4

1-1/4 B 3-3/4 2 25-5/8

1-1/4 B 3-3/4 2 25-5/8

Standard NozzleType

InletConn.(in.)

BodyStyle

Length(in.)

Hex.(in.)

NetWeight

(oz.)

HMFP(F)

3/8 A 1-15/32 13/16 2-3/8

3/8 B 1-45/64 13/16 2-1/2

1/2 A 1-49/64 1 4-1/2

1/2 B 2-1/8 1 4-5/8

3/4 A 2-13/16 1-1/4 8-7/8

3/4 B 2-5/8 1-3/8 12-5/8

3/4 B 2-7/8 1-3/8 13-1/4

3/4 B 3-1/32 1-3/8 12-7/8

1 B 3-1/4 1-3/4 22-1/2

1 B 3-1/4 1-3/4 20-7/8

1 B 3-1/4 1-3/4 20-7/8

1-1/4 B 3-3/4 2 30-1/2

1-1/4 B 3-3/4 2 28-7/8

1-1/4 B 3-3/4 2 27-1/4

1-1/4 B 3-3/4 2 27-1/4

1-1/4 B 3-3/4 2 27-1/4

Based on largest/heaviest version of each type.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 40: Scrubber Nozzle 32

B40

Fu

ll

Co

ne

No

zz

le

s

• Solid cone-shaped spray pattern with round impact area.

• Completely unrestricted internal flow passages with no vane.

• Coarse spray is projected from the nozzle at an axis 90° from the axis of the nozzle inlet.

Vaneless/removable cap1/4" to 1/2" NPT or BSPT (M)

GGANV

Vaneless/removable cap1/4" to 1/2" NPT or BSPT (F)

GANV

Features and Benefits

• Cooling of primary metals and other materials

• Creating and dispersing drops in chemical reaction processing

• Deluging combustible materials and storage tanks for fire suppression/prevention

• Dust control

• Foam break-up, aeration, deaeration

• Washing/rinsing

Applications

See Also http://

– Adjustable ball fittings

– Check valves

– Pressure gauges

– Pressure regulators

– Pressure relief valves

– Solenoid valves

– Strainers

• Accessories• See page B2 for optimization tips.

Optimization Tips

Spray Nozzles, Vaneless Spray

Filter washing application uses vaneless FullJet spray nozzles to remove waste.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 41: Scrubber Nozzle 32

B41

Full

Co

ne

no

zzle

s

GANV, GGANV *At the stated pressure in psi.

InletConn.(in.)

CapacitySize

OrificeDia.

Nom.(in.)

Max.Free

PassageDia.(in.)

Capacity(gallons per minute)*

SprayAngle

(°)*

5 7 10 15 20 30 40 60 80 100 7 20 80

1/4

5 .109 .078 .35 .42 .50 .61 .71 .87 1.0 1.2 1.4 1.6 68 75 82

7 .125 .094 .49 .59 .70 .86 .99 1.2 1.4 1.7 2.0 2.2 68 75 82

8 .156 .109 .57 .67 .80 .98 1.1 1.4 1.6 2.0 2.3 2.5 75 80 85

10 .156 .125 .71 .84 1.0 1.2 1.4 1.7 2.0 2.4 2.8 3.2 75 80 85

11 .156 .141 .78 .92 1.1 1.3 1.6 1.9 2.2 2.7 3.1 3.5 75 80 85

3/8

11 .172 .125 .78 .92 1.1 1.3 1.6 1.9 2.2 2.7 3.1 3.5 75 85 83

13 .172 .141 .92 1.1 1.3 1.6 1.8 2.3 2.6 3.2 3.7 4.1 75 85 83

16 .172 .156 1.1 1.3 1.6 2.0 2.3 2.8 3.2 3.9 4.5 5.1 75 85 83

20 .219 .172 1.4 1.7 2.0 2.4 2.8 3.5 4.0 4.9 5.7 6.3 75 85 83

23 .219 .188 1.6 1.9 2.3 2.8 3.3 4.0 4.6 5.6 6.5 7.3 75 85 83

26 .234 .203 1.8 2.2 2.6 3.2 3.7 4.5 5.2 6.4 7.4 8.2 75 85 83

29 .234 .219 2.1 2.4 2.9 3.6 4.1 5.0 5.8 7.1 8.2 9.2 75 85 83

33 .297 .234 2.3 2.8 3.3 4.0 4.7 5.7 6.6 8.1 9.3 10.4 75 85 83

1/2

32 .313 .203 2.3 2.7 3.2 3.9 4.5 5.5 6.4 7.8 9.1 10.1 85 90 95

40 .313 .234 2.8 3.3 4.0 4.9 5.7 6.9 8.0 9.8 11.3 12.6 85 90 95

48 .313 .281 3.4 4.0 4.8 5.9 6.8 8.3 9.6 11.8 13.6 15.2 85 90 95

56 .391 .297 4.0 4.7 5.6 6.9 7.9 9.7 11.2 13.7 15.8 17.7 85 90 95

64 .391 .328 4.5 5.4 6.4 7.8 9.1 11.1 12.8 15.7 18.1 20 85 90 95

72 .391 .359 5.1 6.0 7.2 8.8 10.2 12.5 14.4 17.6 20 23 85 90 95

Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.

Performance Data

Dimensions and Weights

AngleType

NozzleType

InletConn.(in.)

A(in.)

B(in.)

C(in. sq.)

D(in.)

L(in.)

NetWeight

(oz.)

GANV(F)

1/4 9/16 7/8 3/4 15/16 1-1/4 2-3/4

3/8 11/16 31/32 7/8 1-1/8 1-13/32 3-3/4

1/2 25/32 1-5/16 1 1-9/32 1-13/16 5-5/8

GGANV(M)

1/4 9/16 7/8 3/4 15/16 1-1/4 2-1/2

3/8 11/16 31/32 7/8 1-1/8 1-13/32 3-1/2

1/2 25/32 1-3/8 1 1-9/32 1-7/8 5-3/8

Based on largest/heaviest version of each type.

Spray Nozzles, Vaneless Spray

Material MaterialCode

Nozzle Type

GANV GGANV

Brass (none) l l

303 Stainless Steel SS l l

Other materials available upon request.

Materials

Standard Spray nozzle

1/4 GanV – SS 10l l l l

InletConn.

NozzleType

MaterialCode

CapacitySize

Ordering Info

BSPT connections require the addition of a “B” prior to the inlet connection.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 42: Scrubber Nozzle 32

B42

Fu

ll

Co

ne

No

zz

le

s

• Solid cone-shaped spray pattern with square impact area and spray angles of 40° to 102° at 7 psi (0.5 bar).

• Unique vane design with large flow passages provides superior spray control over a wide range of pressures and flow rates.

• Uniform spray across their entire spray area.

• Ideal for installations requiring complete coverage of rectangular areas or spray zones.

• Removable caps and vanes for easy inspection and cleaning on many models.

Features and Benefits

Spray Nozzles, Square Spray

G-SQ

Removable cap and vane1/8" to 1/2" NPT or BSPT (F)

Removable cap and vane1/8" to 1/2" NPT or BSPT (M)

GG-SQ

HH-SQ

One-piece body1/8" to 3/4" NPT or BSPT (M)

• See page B2 for optimization tips.

Optimization Tips

Removable vane/cast body1-1/4" to 6" NPT or BSPT (F)

One-piece body1" NPT or BSPT (F)

H-SQ H-SQ

• Air and gas washers

• Cooling/quenching

• Dust control

• Fire suppression/prevention

Applications

• Liquor washers

• Product washing/rinsing

• Scrubbers

See Also http://

– Adjustable ball fittings

– Check valves

– Pressure gauges

– Pressure regulators

– Pressure relief valves

– Solenoid valves

– Split-eyelet connectors

– Strainers

• Accessories

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 43: Scrubber Nozzle 32

B43

Full

Co

ne

no

zzle

s

Performance Data

Spray Nozzles, Square Spray

*At the stated pressure in psi.

InletConn.(in.)

Nozzle Type CapacitySize

OrificeDia.

Nom.(in.)

Max.Free

PassageDia.(in.)

Capacity(gallons per minute)*

SprayAngle

(°)*

G-SQ GG-SQ HH-SQ H-SQ 5 7 10 20 30 40 60 80 100 150 7 20 80

1/8

l l l 3.6SQ .063 .050 .26 .31 .36 .50 .60 .68 .82 .94 1.0 1.3 40 52 47

l l l 4.8SQ .078 .050 .35 .41 .48 .66 .80 .91 1.1 1.2 1.4 1.7 48 63 57

l l l 6SQ .094 .050 .44 .51 .60 .83 .99 1.1 1.4 1.6 1.7 2.1 60 66 60

1/4

l l l 10SQ .109 .063 .73 .85 1.0 1.4 1.7 1.9 2.3 2.6 2.9 3.5 62 67 61

l l l 12SQ .125 .063 .87 1.0 1.2 1.7 2.0 2.3 2.7 3.1 3.5 4.2 70 75 68

l 14.5SQ .154 .063 1.1 1.2 1.5 2.0 2.4 2.7 3.3 3.8 4.2 5.0 78 82 75

3/8 l l l 18SQ .156 .094 1.3 1.5 1.8 2.5 3.0 3.4 4.1 4.7 5.2 6.3 71 75 68

1/2l l l 29SQ .219 .125 2.1 2.5 2.9 4.0 4.8 5.5 6.6 7.5 8.4 10.1 71 75 68

l 36SQ .250 .125 2.6 3.1 3.6 5.0 6.0 6.8 8.2 9.4 10.4 12.5 78 82 75

3/4 l 50SQ .266 .172 3.6 4.2 5.0 6.9 8.3 9.5 11.4 13.0 14.4 17.4 71 75 68

1 l l 106SQ .391 .219 7.7 9.0 10.6 14.6 17.6 20 24 28 31 37 78 80 73

1-1/4 l 177SQ .500 .250 12.9 15.0 17.7 24 29 33 40 46 51 62 78 80 73

1-1/2 l 230SQ .563 .344 16.7 19.5 23 32 38 44 52 60 66 80 73 77 70

2

l 290SQ .609 .438 21 25 29 40 48 55 66 75 84 101 66 70 64

l 360SQ .687 .438 26 31 36 50 60 68 82 94 104 125 70 74 67

l 480SQ .828 .438 35 41 48 66 80 91 109 125 138 167 79 82 74

2-1/2

l 490SQ .781 .563 36 42 49 67 81 93 112 128 141 170 62 67 61

l 590SQ .875 .563 43 50 59 81 98 112 135 154 170 205 75 78 71

l 950SQ 1.125 .688 69 81 95 131 157 180 217 247 274 330 81 84 76

5 l 2980SQ 1.875 1.125 217 253 298 410 494 564 679 776 859 1036 89 91 83

6 l 5690SQ 3.219 1.750 414 483 569 783 943 1077 1297 1481 1641 1977 102 105 95

Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 44: Scrubber Nozzle 32

B44

Fu

ll

Co

ne

No

zz

le

s

Material MaterialCode

Nozzle Type

G-SQ GG-SQ HH-SQ H-SQ

Bar Stock:

Brass (none) l l l l

Mild Steel l l l l l

303 Stainless Steel SS l l l l

316 Stainless Steel 316SS l l l

Polyvinyl Chloride PVC l

Cast:

Brass (none) l

Cast Iron l l

316 Stainless Steel SS l

Other materials available upon request.

Materials

Spray Nozzles, Square Spray

Standard Spray nozzle

1/4 G – SS 12SQl l l l

InletConn.

NozzleType

MaterialCode

CapacitySize

Ordering Info

BSPT connections require the addition of a “B” prior to the inlet connection.

Dimensions and Weights

Extruded aluminum pipe and tubing are cooled with FullJet spray nozzles.

Standard NozzleType

InletConn.(in.)

Length(in.)

Dia.(in.)

NetWeight

(oz.)

G-SQ(F)

1/8 1-7/32 9/16 hex. 1

1/4 1-15/32 11/16 hex. 1-1/2

GG-SQ(M)

1/8 1-9/32 9/16 hex. 3/4

1/4 1-9/16 11/16 hex. 1-1/2

HH-SQ(M)

1/8 7/8 1/2 1/2

1/4 29/32 17/32 1/2

3/8 1-3/16 21/32 1

1/2 1-3/8 13/16 1-1/2

3/4 1-19/32 1-1/16 3-1/2

H-SQBar Stock

(F)1 2-3/4 1-1/2 13

H-SQCast(F)

1-1/4 3-7/16 2-1/16 20

1-1/2 4-1/16 2-5/16 28

2 5-7/16 3 60

2-1/2 6-7/8 3-7/16 76

5 12-1/4 6-3/4 oct. 38 lbs.

6 14-3/8 8 oct. 53 lbs.

Based on largest/heaviest version of each type.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 45: Scrubber Nozzle 32

B45

Full

Co

ne

no

zzle

s

Quick Spray Nozzles, Square Spray

• Rectangular and/or square spray with spray angles from 40° to 78° at 7 psi (0.5 bar).

• Integral cap and non-removable vane.

• Fast and easy installation of spray tips without tools.

• Automatic alignment.

Features and Benefits

– Nozzle body, spray tip with integral seal.

• Lower cost – nozzle body can be reused – only spray tips are replaced.

• Ideal for installations requiring uniform coverage of rectangular and/or square area.

• Standard Quick FullJet nozzle assemblies:

• See page B2 for optimization tips.

Optimization Tips

• Cooling/quenching

• Dust control

• Fire suppression/prevention

• Gas scrubbing, washing, cooling

Applications

• Liquor washers

• Product washing/rinsing

• Scrubbers

http://See Also

– QuickJet adjustable ball fitting bodies

– QuickJet nozzle system adapters

– QuickJet nozzle system plugs

– QuickJet split-eyelet bodies

– UniJet® nozzle system adapter for QuickJet systems

• Accessories

QHA-SQ QLHA-SQ

Large connectionStandard connection

Quick FullJet Spray Tips

Quick FullJet nozzles are comprised of two components, a body and a spray tip. QHA-SQ and QLHA-SQ are the two spray tips available. Each of these spray tips are compatible with either the male or female bodies.

• QJA female and QJJA male inlet connections

• QJLA female and QJJLA male inlet connections

Standard QuickJet® Bodies

QJJA and QJJLA male bodies

Spray tip

QJA and QJLA female bodies or

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 46: Scrubber Nozzle 32

B46

Fu

ll

Co

ne

No

zz

le

s

Quick Spray Nozzles, Square Spray

Performance Data

*At the stated pressure in psi.

BodyInlet

Conn.(in.)

QuickFullJet

Tip TypeCapacity

Size

OrificeDia.

Nom.(in.)

Max.Free

PassageDia.(in.)

Capacity(gallons per minute)*

SprayAngle

(°)*

QHA-SQ QLHA-SQ 5 7 10 20 30 40 60 80 100 150 7 20 80

1/8, 1/4,3/8, 1/2

l 3.6SQ .063 .050 .26 .31 .36 .50 .60 .68 .82 .94 1.0 1.3 40 52 47

l 6SQ .094 .050 .44 .51 .60 .83 .99 1.1 1.4 1.6 1.7 2.1 60 66 60

1/4, 3/8, 1/2

l 10SQ .109 .063 .73 .85 1.0 1.4 1.7 1.9 2.3 2.6 2.9 3.5 62 67 61

l 12SQ .125 .063 .87 1.0 1.2 1.7 2.0 2.3 2.7 3.1 3.5 4.2 70 75 68

l 14.5SQ .156 .063 1.1 1.2 1.5 2.0 2.4 2.7 3.3 3.8 4.2 5.0 78 82 75

3/8, 1/2 l 18SQ .156 .094 1.3 1.5 1.8 2.5 3.0 3.4 4.1 4.7 5.2 6.3 71 75 68

1/2 l 36SQ .250 .125 2.6 3.1 3.6 5.0 6.0 6.8 8.2 9.4 10.4 12.5 78 82 75

Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.

Standard NozzleType

Length(in.)

Hex.(in.)

NetWeight

(oz.)

QJA+QHA-SQ 1-15/16 1 3-1/2

QJJA+QHA-SQ 1-27/32 1 3-1/2

QJLA+QLHA-SQ 2-7/32 1-1/8 5

QJJLA+QLHA-SQ 2-1/4 1-1/8 4-1/2

Based on largest/heaviest version of each type.

Dimensions and Weights Body Types

InletConn.(in.)

Standard Body

Conn. F Conn. M

QJA QJLA QJJA QJJLA

1/8 l l

1/4 l l

3/8 l l l l

1/2 l l l l

Material MaterialCode

Spray Tip

QHA-SQ QLHA-SQ

Brass (none) l l

303 Stainless Steel SS l l

Standard Quick FullJet nozzles available in either brass with a Buna-N seal or stainless steel with a Viton® seal.

Materials Ordering Info

Quick FullJet complete Nozzle

Nozzle Body Spray tip

3/8 QJa – SS + QHa – SS 12SQl l l l l l

InletConn.

BodyType

MaterialCode

TipType

MaterialCode

CapacitySize

BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 47: Scrubber Nozzle 32

B47

Full

Co

ne

no

zzle

s

Spray Nozzles, Square Spray

Features and Benefits

• Solid cone-shaped spray pattern with square impact area.

• Medium- to large-sized drops.

• Quick and easy spray tip replacement – remove tips by unscrewing the retainer cap.

• Lower cost – nozzle body can be reused – only spray tips are replaced.

– Nozzle body, spray tip, tip retainer.

• A large choice of interchangeable spray tips, body types/sizes, materials, spray patterns, spray angles, accessories.

• UniJet nozzle options:

Standard spray tip

TG-SQ

A typical UniJet assembly will consist of a T female body or TT male body, spray tip and tip retainer.

Standard UniJet Bodies UniJet Spray Tip

• T female or TT male inlet connections

• See page B2 for optimization tips.

Optimization Tips

Applications

• Cooling primary metals and other materials

• Creation and dispersion of drops in chemical reaction processing

• Dust control

• Foam break-up, aeration, deaeration

• Gas scrubbing, washing, cooling

• Washing/rinsing

http://See Also

• FullJet® Maximum Free Passage spray nozzles for applications prone to clogging

• SpiralJet® spray nozzles for maximum liquid throughput

• Kynar® Quick FullJet spray nozzles for strippers, etchers, developers (See Section K, Special Purpose Spray Nozzles)

– Adjustable mounting clamp nozzle bodies

– Ball valve nozzle bodies

– Check valves

– Plates, tip retainers, adapters

– Plug valve nozzle bodies

• Accessories

– Rollover nozzle bodies

– Split-eyelet bodies

– Strainers

– Swivel nozzle bodies

TT male body

T female body or

Spray tip

Tip retainer

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 48: Scrubber Nozzle 32

B48

Fu

ll

Co

ne

No

zz

le

s

TG-SQ

Spray Nozzles, Square Spray

Performance Data

*At the stated pressure in psi.

BodyInlet

Conn.(in.)

CapacitySize

OrificeDia.

Nom.(in.)

Max.Free

PassageDia.(in.)

Capacity(gallons per minute)*

SprayAngle

(°)*

5 7 10 20 30 40 60 80 100 150 7 20 80

1/4

6SQ .094 .050 .44 .51 .60 .83 .99 1.1 1.4 1.6 1.7 2.1 60 66 60

8SQ .099 .050 .58 .68 .80 1.1 1.3 1.5 1.8 2.1 2.3 2.8 70 75 68

10SQ .109 .063 .73 .85 1.0 1.4 1.7 1.9 2.3 2.6 2.9 3.5 62 66 60

12SQ .125 .063 .87 1.0 1.2 1.7 2.0 2.3 2.7 3.1 3.5 4.2 70 75 68

3/8 18SQ .156 .094 1.3 1.5 1.8 2.5 3.0 3.4 4.1 4.7 5.2 6.3 71 75 68

Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.

Other body types may be available. Contact representative for further information.

UniJet Complete nozzle

nozzle Body Spray tip

1/4 t – SS + tG – SS 12SQl l l l l l

Inlet Conn.

Body Type

Material Code

Tip Type

Material Code

Capacity Size

Ordering Info

BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.

Standard NozzleType

Length(in.)

Hex.(in.)

NetWeight

(oz.)

T+TG-SQTT+TG-SQ 3 13/16 2-1/2

Based on largest/heaviest version of each type.

Dimensions and Weights

Material Material Code

Spray Tip

TG-SQ

Brass (none) l

303 Stainless Steel SS l

Other materials available upon request.

Materials

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 49: Scrubber Nozzle 32

B49

Full

Co

ne

no

zzle

s

Spray Nozzles, Oval Spray

• Solid cone-shaped spray pattern with oval impact area that has a width approximately one half of its length.

• Removable caps and vanes for easy inspection and cleaning.

• Unique internal vane with large flow passages and superior spray pattern control characteristics.

Features and Benefits

• See page B2 for optimization tips.

Optimization Tips

Removable cap and vane3/8" NPT or BSPT (F)

G-VL

Removable cap and vane3/8" NPT or BSPT (M)

GG-VL

• Air and gas washers

• Cooling/quenching

• Dust control

• Fire suppression/prevention

Applications

• Liquor washers

• Product washing/rinsing

• Scrubbers

See Also http://

– Adjustable ball fittings

– Check valves

– Pressure gauges

– Pressure regulators

– Pressure relief valves

– Solenoid valves

– Strainers

• Accessories

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 50: Scrubber Nozzle 32

B50

Fu

ll

Co

ne

No

zz

le

s

G-VL, GG-VL

Spray Nozzles, Oval Spray

StandardInlet

Conn.(in.)

Length(in.)

Hex.(in.)

NetWeight

(oz.)

3/8 1-1/2 13/16 2

Based on largest/heaviest version.

Material MaterialCode

Nozzle Type

G-VL GG-VL

Brass (none) l l

303 Stainless Steel SS l l

Other materials available upon request.

Standard Spray nozzle

3/8 G – SS 4.9Vll l l l

InletConn.

NozzleType

MaterialCode

CapacitySize

Ordering Info

BSPT connections require the addition of a “B” prior to the inlet connection.

MaterialsDimensions and Weights

Performance Data

*At the stated pressure in psi.

InletConn.(in.)

CapacitySize

Max.Free

PassageDia.(in.)

Capacity(gallons per minute)*

SprayAngle

(°)*

15 30 40 60 80 100 15015 40 100 150

A° B° A° B° A° B° A° B°

3/8

4.9VL .040 .59 .81 .93 1.1 1.3 1.4 1.7 104 66 90 60 86 52 83 47

6.5VL .050 .78 1.1 1.2 1.5 1.7 1.9 2.3 106 64 95 60 85 50 81 45

8.1VL .050 .98 1.3 1.5 1.8 2.1 2.3 2.8 102 64 100 65 84 50 80 45

9.2VL .050 1.1 1.5 1.7 2.1 2.4 2.7 3.2 103 65 100 65 86 51 81 46

Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 51: Scrubber Nozzle 32

B51

Full

Co

ne

no

zzle

s

Spray Nozzles,

• See page B2 for optimization tips.

Optimization Tips

Wide Angle Square Spray

• Solid wide angle cone-shaped spray pattern with square impact area and spray angles from 101° to 115° at 10 psi (0.7 bar).

• Unique vane design provides uniform spray distribution.

• Ideal for installations requiring uniform coverage of rectangular and/or square areas.

• Sizes 1-1/4" and larger are cast-type nozzles with removable vanes.

Features and Benefits

Material MaterialCode

Nozzle Type

H-WSQ HH-WSQ

Bar Stock:

Brass (none) l l

Mild Steel l l l

303 Stainless Steel SS l l

316 Stainless Steel 316SS l l

Polyvinyl Chloride PVC l

Cast:

Brass (none) l

Cast Iron l l

316 Stainless Steel SS l

Other materials available upon request.

Materials

One-piece body1/4" to 1" NPT or BSPT (M)

Removable vane/cast body1-1/4" to 3" NPT or BSPT (F)

One-piece body3/4" to 1" NPT or BSPT (F)

H-WSQ H-WSQ HH-WSQ

Ordering Info

Standard Spray nozzle

1/4 HH – SS 14WSQl l l l

InletConn.

NozzleType

MaterialCode

CapacitySize

BSPT connections require the addition of a “B” prior to the inlet connection.

• Air and gas washers

• Cooling/quenching

• Dust control

• Fire suppression/prevention

Applications

• Liquor washers

• Product washing/rinsing

• Scrubbers

http://See Also http://

• Accessories– Adjustable ball fittings

– Check valves

– Pressure gauges

– Pressure regulators

– Pressure relief valves

– Solenoid valves

– Split-eyelet connectors

– Strainers

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]

Page 52: Scrubber Nozzle 32

B52

Fu

ll

Co

ne

No

zz

le

s

Standard NozzleType

InletConn.(in.)

Length(in.)

Dia.(in.)

NetWeight

(oz.)

H-WSQBar Stock

(F)

3/4 2-3/16 1-1/4 7-3/8

1 2-3/4 1-1/2 13

H-WSQCast(F)

1-1/4 3-7/16 2-1/16 20

1-1/2 4-1/16 2-5/16 28

2 5-7/16 3 60

2-1/2 6-7/8 3-7/16 76

3 7-23/32 4-1/8 96

HH-WSQ(M)

1/4 29/32 17/32 1/2

3/8 1-3/16 21/32 1

1/2 1-3/8 13/16 1-1/2

3/4 1-19/32 1-1/16 3-1/2

1 2-3/32 1-5/16 7

Based on largest/heaviest version of each type.

Dimensions and Weights

Spray Nozzles, Wide Angle Square Spray

Performance Data

*At the stated pressure in psi.

InletConn.(in.)

Nozzle Type CapacitySize

OrificeDia.

Nom.(in.)

Max.Free

PassageDia.(in.)

Capacity(gallons per minute)*

SprayAngle

(°)*

H-WSQ HH-WSQ 5 7 10 15 20 30 40 60 80 5 10 80

1/4 l 14WSQ .141 .063 1.0 1.2 1.4 1.7 1.9 2.3 2.6 3.1 3.5 99 101 93

3/8

l 17WSQ .156 .063 1.3 1.5 1.7 2.0 2.3 2.8 3.1 3.7 4.2 99 101 93

l 20WSQ .172 .094 1.5 1.7 2.0 2.4 2.7 3.2 3.7 4.4 5.0 104 110 94

l 24WSQ .188 .094 1.8 2.1 2.4 2.9 3.3 3.9 4.4 5.3 6.0 104 110 94

l 27WSQ .203 .109 2.0 2.3 2.7 3.2 3.7 4.4 5.0 5.9 6.7 104 110 98

1/2

l 30WSQ .219 .109 2.2 2.6 3.0 3.6 4.1 4.9 5.5 6.6 7.5 104 110 102

l 35WSQ .234 .125 2.6 3.0 3.5 4.2 4.7 5.7 6.4 7.7 8.7 104 110 102

l 40WSQ .250 .125 2.9 3.4 4.0 4.8 5.4 6.5 7.4 8.8 10.0 104 110 102

l 45WSQ .250 .141 3.3 3.8 4.5 5.4 6.1 7.3 8.3 9.9 11.2 104 110 102

l 50WSQ .266 .156 3.7 4.3 5.0 6.0 6.8 8.1 9.2 11.0 12.5 104 110 102

3/4 l l 71WSQ .391 .172 5.2 6.1 7.1 8.5 9.6 11.5 13.1 15.6 17.7 105 110 102

1 l l 130WSQ .516 .219 9.6 11.1 13.0 15.5 17.6 21 24 29 32 107 110 107

1-1/4 l 190WSQ .609 .219 14.0 16.2 19.0 23 26 31 35 42 47 108 111 109

1-1/2 l 290WSQ .719 .313 21 25 29 35 39 47 53 64 72 109 114 109

2 l 560WSQ .984 .438 41 48 56 67 76 91 103 123 140 110 114 109

2-1/2 l 830WSQ 1.250 .563 61 71 83 99 113 135 153 183 207 110 115 109

3 l 1070WSQ 1.375 .688 79 91 107 128 145 174 197 235 267 110 115 109

Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.

Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]