SCREEN PRINTING INKS - toyoink.com.tr · GHOST CLEANER CELLULOSIC THINNER MX-7925 SE-9925 SP-7925...
Transcript of SCREEN PRINTING INKS - toyoink.com.tr · GHOST CLEANER CELLULOSIC THINNER MX-7925 SE-9925 SP-7925...
SCREEN PRINTING INKS
f o r t h e s u s t a i n a b i l i t y o f l i f e . .
ScreenPrinting InksScreen Printing Inks are used in printings made
with serigraphy system. Ink viscosity is adjusted
with thinners according to type of sieve.
There are different series screen inks which are suitable to
different materails such as metal, glass, artificial leather,
textile and paper besides plastic materials and in diversity
that can satisfy all needs of the sector. These inks are used
in printing of many products such as graphics, posters,
advertisement boards, billboards, totems and promotion
materials.
SE Series
Solvent based screen inks seriesMAXIMA is self-dissolving screen ink series which is
designed for printing on hard and soft PVC, self adhesive
PVC papers, enamels, melamine, polycarbonates,
oroglass, perspex and other acrylates, ABS, CAB,
cellulose acetate, polystyrene, polyesters, artificial
leather, plexiglass, paper and cardboard.
Solvent based screen inks seriesSE series screen inks having extra high adhesion
characteristics are suitable for applications that are not
needed high chemical resistance. They can be applicable
to hard plastics, PVC, artificial leather, plexiglass, acetate,
polystyrene, self adhesive PVC papers, enamel, melamine,
cardboard, polycarbonate, oroglass, perspex and other
acrylics, ABS, CAB, cellulose acetate and polyesters.
The plasticizers present in the structure of soft PVC
known as artificial leather have tendency to migrate to the
surface by the time and this leads to blocking problem.
For that reason some print samples should be subjected
to blocking test.
Technical Properties• Excellent gloss (can be produced as matt if desired)
• Very low blocking risk
• Low odour
• Fast drying
• Elastic printing surface with good rub resistance
• High rub resistance and high slipperiness
• Excellent dot sharpness and excellent screen work
• Superb screen stability and self solvency
• Maximum lightfastness and weathering resistance
(sufficient also for normal printing of outdoor
advertising posters)
• High battery acid, alcohol and petrol resistance
MX Series
Technical Properties• Excellent gloss (can be produced as matt if desired)
• Low odour
• Fast drying
• High rub resistance and high slipperiness
• Excellent dot sharpness and excellent screen work
• Superb screen stability and self solvency
• High battery acid and petrol resistance
Remarks:• Printings on glass and metal surfaces should be cured for
15 minutes at 140 °C to obtain maximum hardness and
adhesion.
• Ink should be stored as two packs and should be mixed in
recommended ratios just before using.
• Since the ink mixture will be hardened after 12-10 hours,
just required amount of ink should be prepared.
• Polyethylene surfaces should be treated with fire.
• Even though the inks have high light resistance, epoxy
resins used in formulation can have poor weathering
resistance. Prints might have chalking tendency and loss
of gloss risk. Inks might be not useful for long term
outdoor applications.
Technical Properties• Excellent gloss (can be produced as matt if desired)
• Low odour
• Fast drying
• High rub resistance and high slipperiness
• Excellent dot sharpness and excellent screen work
• Superb screen stability
• High battery acid, alcohol and petrol resistance
Double component solvent based screen inks seriesSF series screen inks are developed for extra high
adhesion and resistance applications. Double
component, epoxy based SF series inks are
designed for printing on HDPE, LDPE, PP, metal and
glass to obtain printings having very high gloss and
resistance. SF series inks dry by chemical reaction
(polymerization). Although surface drying is
completed in 20-30 minutes after printing, the
hardening of the ink film occurs after 12 hours.
Chemical resistance of the printing is very good
after 24 hours and it reaches its best after a few
days.
Mixing Ratio: 2 units ink and 1 unit hardener
(SF0421) by weight. Chemical resistance can be
increased by increasing the ratio of the hardener
up to 1/1 weight-to-weight ratio by keeping in mind
that the elasticity of the ink film will decrease in
the same ratio. The viscosity of the mixture should
be adjusted by SF9900 thinner according to the
mesh number of the screen and no other solvent
should be used.
SF Series
SP SeriesSolvent-based serigraphy ink series
SP series is a screen ink series which have
an excellent adhesion to polypropylene
materilas. SP serie is cured with
evaporation of solvents in the system and
via chemical reaction (polymerization).
Technical Specifications
• Good brightness
• Low odor,
• Rapid curing,
• High frictional resistance and viscosity,
• Perfect tram density and mold work,
• Excellent sieve stability and attribute of self-melting,
• Resistance to battery acid, petroleum
SPESIFICATIONS COLORS
SolventBased
MAXIMASERIE
SE SERIE
SF SERIE
SP SERIE
excellent
excellent
excellent
excellent
MX
SE
SF
SP
high
normal
high
high
fast
normal
fast
fast
low
normal
low
normal
high
normal
high
high
very good
normal
very good
very good
GLOSS ELASTICITIY DRYING ODOUR CHEMICALRESISTANCE
BLOCKINGRESISTANCE
PROCESSCOLORS
SPOTCOLORS
SCREEN THINNERS
FAST THINNER
NORMAL THINNER
RETARDER THINNER
SPRAY THINNER
THINNER
SCREEN CLEANINGSOLVENT
DEVELOPER
GHOST CLEANER
CELLULOSIC THINNER
MX-7925 SE-9925 SP-7925
MX-7935 SE-9935 SP-7935
MX-7945 SE-9945 SP-7945
MX-7955 SE-9955 SP-7955
SF-9900
MX-7909 SE-9909 SP-7909
SE-9903
SE-9904
MX SERIES SE SERIES SF SERIES SP SERIES
SOLVENT BASED
Screen ink series having excellent printing, adhesion and drying properties with a wide range of transparent and opaque color palette. If requested all colors can also be produced as mat inks.
These ink series are suitable to use for screen printing works. For different sieves viscosity is adjusted to the print viscosity by using thinners. There are special series which can be applied on to a very wide range of plastic substrates and also metal, glass, artificial leather, fabric and paper. Some common products from the screen printing industry include posters, labels, signage, billboards, totems and all types promotion materials.
SF series screen inks are developed for extra high adhesion and resistance applications. Double component, epoxy based inks are designed to obtain printings having very high gloss and resistance.
Fast thinner should be used for very fast automatic printers and at cold conditions where drying takes longer time than expected.
For SF series 2 units ink and 1 unit hardener (SF0421) by weight is mixed. The viscosity of the mixture should be adjusted by SF-9900 thinner according to the mesh number of the screen and no other solvent should be used.
10-20% thinner should be used to prepare ink to the print viscosity for No.120 screens. This quantity differs for other type sieves. Thinner that will be used should be select according to ink type and printing conditions.
It is an effective cleaning solvent, used for screen cleaning after print work without damaging the screen. And it is also recommended to use for other cleaning operations. Cellulosic thinners should not be mixed into inks.
This cleaner can be used for cleaning the ink residues on the screen. The print ghosts that are appear during the print or rest after print should be clean with this cleaner. Because this residues can be blocked the screen. Print ghosts are come into begin if the wrong solvent used for screen cleaning or if the emulsion and ink are not compatible.
It is an effective cleaning solvent, used for screen cleaning after print work without damaging the screen.
It is a cleaning solvent to use for cleaning emulsion leftover on screen. After emulsion decomposition process this solvent also be used for cleaning the emulsion residues from the previous work, which can be damage the new image.
At very high temperature Retarder Thinner would be used.
For spray applications Spray Thinner would be used.
Under normal conditions Normal Thinner should be used.
SP series screen inks are developed for extra high adhesion and resistance applications for especially polypropylene materials.
SCREEN INKS
FM-9900
FASTNESS PROPERTIES
Light Fastness Transparency Light Fastness Transparency
MX
SERI
ES
MX
SERI
ES
SE S
ERIE
S
SE S
ERIE
S
SF S
ERIE
S
SF S
ERIE
S
SP S
ERIE
S
SP S
ERIE
S
Light Fastness
Lowest 1
Highest 8
Opaque
Semi-Transparent
Transparent
Transparency
(*)Symbol indicated inks contain heavy metal. They cannot be used for toys
production according to CEE Toys EN71/3 rules.
MX-7200 Process Yellow 7 MX-7606 Red 7-8 MX-7600 Process Magenta 7 MX-7350 Green 7 MX-7100 Process Cyan 8 MX-7305 Green 8 MX-7500 Process Black 8 MX-7351 Green 7 MX-7250 Yellow 7 MX-7125 Blue 8 MX-7220 Yellow 7 MX-7109 Reflex Blue 7-8 MX-7202 Yellow 7 MX-7135 Dark Blue 8 MX-7210* Yellow 7 MX-7402 Violet 8 MX-7233 Orange 7-8 MX-7400 Opaque White 8 MX-7230* Orange 7 MX-7404 Extra Opaque White 8 MX-7235* Orange 7 MX-7411 Silver 8 MX-7024 Warm Red 7 MX-7452 Gold 8 MX-7090* Red 6 MX-7555 Black 8 MX-7017 Rubine Red 6 SE-1225 Process Yellow 5 SE-2305 Green 8 SE-1025 Process Magenta 7 SE-2101 Blue 8 SE-1125 Process Cyan 8 SE-2132 Blue 8 SE-1500 Process Black 8 SE-2110 Blue 8 SE-2250 Yellow 7 SE-2135 Dark Blue 8 SE-2206 Yellow 7 SE-2402 Purple 6 SE-2210* Yellow 8 SE-2400 Opaque White 8 SE-2230* Orange 8 SE-2419 Opaque White 8 SE-1024 Warm Red 5 SE-2411 Silver 8 SE-2024 Warm Red 5 SE-2452 Gold 8 SE-1017 Rubine Red 7 SE-1950 Brown 7 SE-2017 Rubine Red 7 SE-3400 Matt White 8 SE-1305 Green 8 SE-3500 Matt Black 8 SF-1225 Process Yellow 5 SF-0024 Rubine Red 6 SF-1025 Process Magenta 7 SF-0351 Green 8 SF-1125 Process Cyan 8 SF-0115 Blue 8 SF-0501 Process Black 8 SF-0111 Blue 8 SF-0206 Yellow 7 SF-0101 Blue 8 SF-0240* Yellow 8 SF-0411 White 8 SF-0255* Orange 8 SF-0407 Silver 8 SF-0020 Warm Red 6 SF-0410 Gold 8 SP-1200 Process Yellow 7 SP-1606 Red 7-8 SP-1600 Process Magenta 7 SP-1350 Green 7 SP-1100 Process Cyan 8 SP-1305 Green 8 SP-1500 Process Black 8 SP-1351 Green 7 SP-1250 Yellow 7 SP-1125 Blue 8 SP-1220 Yellow 7 SP-1109 Reflex Blue 7-8 SP-1202 Yellow 7 SP-1135 Dark Blue 8 SP-1233 Orange 7-8 SP-1402 Violet 8 SP-1235* Orange 7 SP-1400 Opaque White 8 SP-1024 Warm Red 7 SP-1404 Extra Opaque White 8 SP-1090* Red 6 SP-1411 Silver 8 SP-1017 Rubine Red 6 SP-1452 Gold 8 SP-1555 Black 8
MX SE SF SPBase PVC/PVAc/MMA/BMA Copolymer Resins Epoxy Resins Acrylic ResinsShade Process colours Spot colours (Transparent and opaque) Metalic colours (Gold and silver) Solid Content % 30-50 % 80- 90 % 30- 60 Density 1,0.-.1,7 g/ml, 20°C Drying Mechanism Evaporation (air or IR) Evaporation and Chemical Evaporation and Chemical Reaction (Polymerization) Reaction (Polymerization)
Drying Time At room temperature (25° C) 5-10 minutes Surface Drying 20 – 30 min./25°C At room temperature (25° C) 5-10 minutes
PHYSICAL PROPERTIES
Application Method Screen printing
Ink Efficiency Nr 100 mesh g/m2 m2 /kg White 18-20 50-55 Coloured 15-17 60-65
APPLICATION PROPERTIES
SOLVENT BASED
DEFOAMER
OVERPRINT VARNISH
TRANSPARENT VARNISH
MATT TRANSPARENT
MATTING PASTE
ADHESION PROMOTER
MX-7901
MX-7444
MX-7440
MX-8440
MX-8000
SE-9901
SE-1406
SE-1400 SE-0440
SE-3440
SE-3000
SE-9902
SF-7902
SF-0400
SF-0402
SF-0425
SP-7902
SP-1440
SP-1000
SP-8440
SP-8000
SCREEN INKS PRINTING AIDSMX SERIES SE SERIES SF SERIES SP SERIES
It is a defoaming and levelling additive. Foaming problem is caused by bad levelling on printing. This can be resulted in pinholes sometimes. To prevent this problem print substrate should be cleaned. If smooth level cannot be achieved, small amount of defoamer (max 1%) can be added to the ink externally. By mixing carefully, levelling problem should be solved.
High gloss protective overprint lacquer. It is used to get slip, gloss and protective property on printed materials. If matt effect is desired, suitable matting paste can be added.
Matt and gloss transparent varnishes are compatible with ink system. These are used for to adjust the colour density of inks according to print conditions.
When matt appearance is requested, it is used by mixing into the ink upto desired level. Since it is compatible with ink, it can be mixed easily.
It is a printing aid used to get better adhesion at printing to surfaces that are non-corona treated and/or inadequate treated. Beside it can be used for very thin film materials, which cannot treat with flame. Application: It is applied directly to substrate surface that is clean, dry, without grease and dust with a piece of cotton or fabric. Print can be made just after drying. Efficiency stays for 1-2 days.
PHYSICAL PROPERTIES
THINNERS
Density (g/ml, 20°C)
BoilingRange (°C)
Flash Point (°C)
PhysicalState
Odour
SOLVENT BASED
MX SERIES SE SERIES SF SERIES SP SERIES
Fast
0.874
114-176
>30,5
colourless liquid
Normal
0.913
162-232
>49
colourlessliquid
Retarder
0.954
168-232
>62
colourlessliquid
Spray
0.856
118-142
>23
colourlessliquid
Fast
0.875
162-176
49
colourlessliquid
Normal
0.901
162-232
>49
lightyellowliquid
Retarder
0.954
228-232
105
colourlessliquid
Spray
0,850
118-142
>23
colourlessliquid
Developer
0.946
153-156
43
colourlessliquid
Ghost Cleaner
0.838
56-156
<3
colourlessliquid
Thinner
0.926
168 - 255
> 59
lightyellowliquid
Fast
0,874
114-176
>30,5
colourlessliquid
Normal
0,913
162-232
>49
colourlessliquid
Retarder
0,954
168-232
>62
colourlessliquid
Spray
0,856
118-142
>23
colourlessliquid
Cellulosic Thinner
0.875
155 – 181
38
colourlessliquid
FM SERIESMX-7925 MX-7935 MX-7945 MX-7955 SE-9925 SE-9935 SE-9945 SE-9955 SE-9903 SE-9904 SF-9900 SP-7925 SP-7935 SP-7945 SP-7955 FM-9900
Characteristic
SPECIFICATIONS
Printed with DYOLIFE Sheet-Fed offset ink series.
Head Office & Factory
Manisa Organize Sanayi Bölgesi
5. Kısım Hasan Türek Bulv.
No:6 45030 MANİSA - TÜRKİYE
Phone: +90.236.226 50 00 (pbx)
Fax: +90.236.226 51 10
Marmara Sales Off ice
Oruçreis Mah. Esenler Koza Plaza B Blok
Kat:7 Daire:26 Esenler - İSTANBUL - TÜRKİYE
Phone: +90.212.482 12 17
Fax: +90.212.481 64 54
Anatolian Sales Off ice
Ali Suavi Sokak No: 11
Maltepe ANKARA - TÜRKİYE
Phone: +90.312.294 92 90
Fax: +90.312. 294 92 99
Adana Sales Off ice
Atatürk Cad. Çınarlı Mah. Aziz Naci İş Merkezi
No:11 K: 2 D: 9 Seyhan ADANA - TÜRKİYE
Phone: +90.322.363 23 61
Fax: +90.322.363 29 56
www.dyoinks.com