ScorpionEXM datasheet 10.14
Transcript of ScorpionEXM datasheet 10.14
Elkhart Brass Mfg. Co., Inc. • 1302 W. Beardsley Avenue • Elkhart, Indiana 46514 • 1-574-295-8330 • 1-800-346-0250© 2013 Elkhart Brass Mfg. Co., Inc. • www.elkhartbrass.com
SCORPION® EXMEfficient, high-flow, electric remote controlled water monitor (water cannon) for fire apparatus, ARFF, industrial pumper, and de-icing vehicles.
The Scorpion EXM is a large flow capacity addition to the EXM product family. Developed as the successor to the radio frequency (RF) control series, the EXM operating system is a "plug and play" digital communication and control architecture that simplifies installation while greatly expanding builder and user selectable options.
In addition to the EXM functionality, the Scorpion has been further updated to employ a new ultra high efficient waterway and axially aligned thrust bearings for a 22% increase in flow efficiency, vs. the traditional Scorpion, and 10 times greater durability.
Mechanical Features: • Sealed to NEMA 4 • 2500 GPM flow • Achievable -80° & +120° vertical travel • Axially aligned thrust bearings • Absolute position sensors • Manual travel override • Fully potted electronics • Teflon impregnated, hard anodized aluminum alloy waterway • Extreme torque motors • High efficiency sealed planetary gearboxes
Control Features: • Universal input voltage 11-30VDC • Wired or wireless communication • CAN bus J1939 compatible • Programmable travel speeds • Single speed, two speed, or fully proportional speed control • Programmable 3D travel limits • Programmable block out zones • Programmable stow • Programmable oscillation • Integration water valve control • Position display
SCORPION® EXM Monitor
SCORPION EXM
OEM Interface Module (Optional)
Panel Mount Controller (Optional)
Panel MountProportional
Joystick
Chooseco
t
OEleor
e wired or wmmunicatio
OEM Sourced ectromechanica
Switches
wireless on
al
W
MonitorDis
UnVa
Wireless Hand-Remote and Pa
Mount Charg
r Position splay
CANEnabled
(Op
ibody alve
-held anel er
N J1939 d Controller/PLC ptional)
Elkhart Brass Mfg. Co., Inc. • 1302 W. Beardsley Avenue • Elkhart, Indiana 46514 • 1-574-295-8330 • 1-800-346-0250© 2013 Elkhart Brass Mfg. Co., Inc. • www.elkhartbrass.com
SCORPION® EXMSCORPION® EXM Monitor
Model Inlet Outlet
Voltage Control Control Commun
Weight Max Press
SPECIFIC
3.5
H L11Se
ication CA2.frequency (unlicensed)
sure 50
CATIONS
5” NH , 3.5” BSPPT
L175° to R175-27 VDC
ealed electricAN bus (J1939)4 GHz digital radio
0 psi
°
c motors
74004” ANSI / DN100
52 lbs.
V -45° to +90°
The SM1250E and SM2000E are two electrically actuated master stream nozzles for use with the Scorpion EXM monitor. The X-Stream series nozzles automatically adjust to maintain an effective stream and maximum reach at variable or reduced flows. Electric actuators are completely sealed and allow precise pattern control from straight stream to wide fog.
X-Stream Series Master Stream Nozzles
SM1250ESM2000E
Model Inlet
3.5”
SPECIPressure
75 (5.17) 300-1250 (1136-4732)500-2000 (1893-7571)80 (5.51)
IFICATIONNS PSI(BAR) FFlow Range - GPM (LPM)
SM-1250E
SM-2000E
7400 Scorpion EXM Static Pressure Drop(4.0" Inlet and 3.5" Outlet)
0
10
20
30
40
50
60
70
80
90
100
0 500 1000 1500 2000 2500Flow Rate (GPM)
Pres
sure
(PS
I)
Total Static Pressure Drop Friction Loss
Travel(factory setting)