ISO 9001Quality

ISO 14001Environment

OHSAS 18001Health & Safety

ISO/IEC 27001Information Security

Management

ISO/IEC 20000-1IT Service Management

Supplier: 40447

Score Group plcIntelligent Valve and Gas Turbine Solutions™

w w w. s c o r e - g r o u p . c o m

Intelligent Valve and Gas Turbine Solutions™

Score Group plcw w w. s c o r e - g r o u p . c o m

Glenugie Engineering WorksPeterheadAberdeenshireAB42 0YXSCOTLAND, UK

Tel: + 44 (0) 1779 480 000Fax: + 44 (0) 1779 481 100Email: customersupport@score-group.comWebsite: www.score-group.com

Approvals held within the Score group of companies include:

The information contained within this document is valid and correct at the time of printing, however we reserve the right to modify details without notice. For a copy of our latest literature please contact customersupport@score-group.com or download from www.score-group.com.

© Score Group plc, 2011

Valve Supply, Repair and Overhaul

Valve Automation and Control

Industrial Gas Turbine Services

Engineering and Design Consultancy

Condition Monitoring and Diagnostics

Fuel Systems Overhaul

Surface Treatments

●●●●●●●

Technical and Commercial Training

Valve Leak Detection

Enhanced Testing

Subsea Engineering Technology

Marine and Military Support

Cell Disruption

●●●●●●

ATEX9723EC

Services

Intelligent Valve & Gas Turbine Solutions

The Valve Strategy provides a framework for plant maintenance, ensures compliance with the applicable safety and statutory requirements and ensures best long term value and plant operability. The key is the identification of a valve’s function and hence its criticality.

By identifying a valve’s criticality, in terms of its importance to platform safety and plant operability, the valve can be assigned the following:-

● The Optimum Insurance Spares Holding● Maintenance Routine covering: ○ Inspection Frequency ○ Test Frequency ○ Preventative Maintenance Schedule

Critical StockScore Group plc has the world’s largest independant stock of valves and actuators. With a valve inventory in excess of £280,000,000 a necessary foundation is now in place to support our customers and provide integrated valve solutions.

The holding of key insurance spares is one of the most important aspects of Valve Management. A balance must be found between providing the minimum number of spares and providing sufficient spares to keep the facility operating safely and with maximum availability.This balance is achieved using a cost analysis of the supply chain for the delivery, stocking levels and refurbishment of valves and their spares compared to the risk of plant unavailablity.

Valve Strategy

Valve Criticality

Intelligent Valve Management TM

A suite of Score developed systems that enable significant benefits to be gained in the life cycle management of large valve populations

Revision 0

The Maintenance Routine is a means of providing written Maintenance Work Instructions and monitoring mechanisms to optimise valve, operator and instrumentation performance, increase safety, and minimise the risk of production losses by reducing the risk of potential failures.

These routines include the use of condition monitoring and analysis systems, such as those developed by Score below:-

Midas Meter - Valve leak detection and quantification

V-Scan - Control valve benchmarking and performance anlysis

V-MAP - In-line continuous valve condition monitoring

PSV In-line Testing

PSV Benchmarking

Intelligent Valve Managem

ent

Preventative Maintenance Routines

It has been recognised by the industry that an improved method is required that takes into account the PSV’s previous performance, the service conditions and the consequence of failure to lift or to hold pressure.

Score’s PSV Benchmarking system determines the optimum recertification period for a PSV, commensurate with its service, performance and the consequences of failure to lift or hold pressure. The system is based on RBI (Risked Based Inspection) principles and is an advance on the many prescriptive regimes prevalent in industry.

PSV Benchmarking

● Increase Plant Availability

● Establish Maintenance Routines for Critical Valves

● Focused Valve Condition Monitoring

● Maximise ‘Up Time’

● Optimum Valve Spares Holding

● Agreed and Implemented Stock Profile

● Fully Auditable Process

● Increase Plant Safety

● Identifies High Risk and Problem Valves

● Cost Savings

Benefits of Intelligent Valve Management

● Optimises Recertification, Often Leading to Reduced Cost

● Identifies Poor Performing PSV’s and Required Remedial Action

● Identifies Service or Operator Problems

Revision 01

Score Group plcIntelligent Valve and Gas Turbine Solutions™

w w w. s c o r e - g r o u p . c o m

For more information contact:

Score Group plcGlenugie Engineering WorksPeterheadAberdeenshireUnited KingdomAB42 0YX

Tel: +44 (0) 1779 480000Tel: +44 (0) 1779 481100

Score’s expertise and ambition in ensuring the success of a customer’s project, is the fundamental reason behind our success in providing our customers with solutions to their valve management requirements. This is one of the reasons why Score provide solutions for many of the world’s largest energy companies and engineering contractors on a day to day basis.As principle we work to three project goals:

“As one of Europe’s leading valve suppliers, stockists and contractors, Score offers customers a complete valve management service for any size or complexity of project.”

Objective sourcing of product from competing manufacturers.

Expert knowledge of design manufacturing capabilities.

Proven documentation management system.

Substantial knowledge of supplier track records.

Access to preferential commercial deals.

Established close relationships with manufacturers, with Score bases close to manufacturing locations.

Potential use of Score’s existing $500,000,000 stock.

Thorough valve project management experience, completing projects upwards of £60 million in value.

Capability to provide the quickest of solutions to problem situations.

Engineering solutions to modify and supply from existing stock.

Specialised testing facilities.

Provide CE marking to Score modifications.

Impartial service.

Proven track record.

How Score can add value to your project:

®Score Group companies have employed acoustic emission technology to find leaking valves for oil & gas customers around the globe for the past 15 years. Midas Meter® employs Score developed signal processing & electronics, Score proprietary leakage algorithms and a Score proprietary Acoustic Emission sensor. Midas Meter® was developed and is manufactured by Score Group ISO 9001:2008 certified companies.

Case studies using Acoustic Emission technology:

Detection of erosion damage in the body and trim of a bypass valve avoided the potentially catastrophic loss of containment of hazardous fluid on an offshore platform which would have led to emergency shutdown and consequential loss of production.

A leak detection survey reduced the required scope of an offshore shutdown campaign and saved an estimated $100,000.

Survey of 61 Pressure Safety Valves and Blowdown Valves found that 7 were leaking to flare with an estimated loss of 85 tonnes/year of gas.

●

●

●

Eroded bypass valve

Score Group plcIntelligent Valve and Gas Turbine Solutions™

w w w. s c o r e - g r o u p . c o m

Midas Meter® is a registered Trademark of Score Group plc.© Copyright, Score Training And Multimedia Productions Limited 2012. Revision 03

ATEX II 1G Ex ia IIC T4 GaIECEx Ex ia IIC T4 GaCSA Class I, Division 1, A, B, C, D T4 Class I, Zone 0, Ex ia IIC T4 Class I, Zone 0, AEx ia IIC T4Hazardous Area Certified Zone 0, 1 & 2Intrinsic Safety Classification ‘ia’ R & TTE Directive: EMC Class A (Industrial)RoHSWEEECE

● ● ●

● ● ● ● ● ●

Compliance Certification:

@MIDASMeter Follow us on

For further information or to request a quotation, please contact us at:- midas.meter@score-group.com or go to www.midasmeter.com

European Union

International/Australia

North America (Divisions)

North America (Zones)

Certification acquired for the MIDAS Meter® is as follows:

Approvals

®

Give your Operators and Technicians the

It is known that LEAKING VALVES represent a MAJOR SAFETY RISK and are a MAJOR SOURCE OF LOST PROFITS

Find leaking valves with Midas Meter® long before detection by conventional methods or instrumentation. Avoid product losses to the flare and fugitive emissions, confidently prepare for maintenance outages and avoid excessive valve damage due to prolonged leakage.

Use Midas Meter® to increase your operators’ confidence levels in their valve leakage performance and measurement test programmes and to create evidence to support their site Safety Case and Safety Integrity Level compliance requirements.

Midas Meter® is an excellent tool to use in Hydrocarbon Leak Detection Programmes and can be used as a best available monitoring method (BAMM) for acoustic leak detection and quantification, in compliance with the US EPA's (Environmental Protection Agency) Greenhouse Gas Reporting Mandate 40 CFR 98 Subpart W 98.234(a)(5).

Give Operations and Maintenance personnel the tools they need to quickly and confidently find the leaking valves, target the right valves for maintenance, order spare parts and replacement valves ahead of the outage and avoid extended shutdowns.

Quickly find leaking isolation valves, control valves, PSVs and steam trapsDetect product losses to flare, vents and drainsDetect leaks as low as 0.1 litre per minute Prioritize valves for maintenanceBenchmark valve performance during commissioningProvide leakage quantification in the following fluids: Oil, Gas, Condensate, Water, Steam, Compressed AirProvide data storage and analysis in the field via a PDA

Use Midas Meter® Acoustic Emission Leak Detector for Valves to:

- Don’t let valuable product escape to the flare -

- Improve Safety - - Improve plant efficiency -

- Find damaged valves - - Decrease emissions -

●

● ● ● ● ● ● ●

Completely portable and easy to useNon-intrusive to the processMidas Meter® is certified for use in hazardous areasMidas Meter® Ambient temperature range: -20ºC to +50ºCThe sensor face temperature range is -50ºC to +125ºCWaveguides are supplied for use outwith sensor face temperature rangeIntegral LCD display for use without PDABluetooth communications from handset to PDAPDA for data logging and quantification analysis of leak detection surveyPC based Communicator software provided to enable: Upload of valve information to PDA Generation of standard reports on the valves surveyed Export of survey data Back up of PDA data Control of software licence and calibration

For Hazardous area applications a hazardous area PDA is supplied. For non-hazardous areas a ruggedised PDA is supplied. (Contact us for detailed specifications)

● ● ● ● ● ● ● ● ● ●

●

Midas Meter® PDA

Midas Meter® takes you from reactive to proactive maintenance by engaging in condition based monitoring and “predictive” maintenance activities. Midas Meter® valve leak detection equipment therefore helps focus budget expenditure and actions on valves where maximum benefits can be achieved.

Midas Meter® Windows Mobile PDA Software

Midas Meter® Features:

Approved by Lloyds Register Quality Assurance to the Following Quality Management System Standards ISO 9001 : 2008

Score Group plcSpecialised Independent Valve Research and

Test Centre Cowdenbeath, Scotland

The standard valve tests specified in the international standards are not always sufficient to demonstrate fitness for purpose in certain critical applications. Consequently, valves require

enhanced testing under simulated operating conditions.

Safety Commitment

Safety is the primary consideration in all our work.Score have now completed over 3000 Cryogenic Tests and more than 1500 Fire Type Tests.

Environmental Statement

Score are committed to assisting all parties in global environmental protection.

For further details please contact :

Ian Farrow, General Manager, Score (Europe) Limited.The Paragon Works, Woodend Place, Cowdenbeath, Fife, KY4 8EE, Scotland, U.K.

Tel : +44 (0) 1383 510 510Fax : +44 (0) 1383 514 512

Revision 02

Hydrostatic TestingValves are hydrostatically tested in order to prove the integrity of the valves pressure retention envelope and seat sealing capability.

High Pressure and Fugitive Emission TestingValves and associated products are pressure tested, leakage rates monitored and measured using calibrated Micro manometers. Fugitive emission testing is carried outwith any external leakages measured using our high sensitivity Mass Spectrometer.

Low Temperature / Cryogenic Testing / Elevated TemperatureFor low, Cryogenic and Elevated temperature testing we have purpose built thermally insulated test chambers. Liquid nitrogen is used as the cooling medium.

Gas Testing UnderwaterValves are gas tested and monitored underwater in our specifically designed test facility.

Fire TestingFire testing is carried out to customer and International Standards within our purpose built Fire Test facility.

Valve Repair / ServicingWe have a comprehensive workshop facility providing the capability to repair all valve types including the recertification of Pressure Safety valves.

We welcome and encourage customers to visit and view our facility.

Score Group plc, Glenugie Engineering Works, Peterhead,Aberdeenshire AB42 0YX, Scotland, U.K.

Tel: +44 (0) 1779 480000 Fax: +44 (0) 1779 481100Email: customersupport@score-group.com

Web: www.score-group.com

Registered in Scotland No. 172439

31 Client Assets have saved a total of £5.5 million over the last 6 year period

Score Group plcIntelligent Valve and Gas Turbine Solutions™

w w w. s c o r e - g r o u p . c o m

Score (Europe) LimitedGlenugie Engineering Works PeterheadAberdeenshireAB42 0YXScotland

Tel: +44 (0) 1779 480 000Fax: +44 (0) 1779 481 100Email: customersupport@score-group.com

Pressure Safety Valve Division

Saving you costs for Valve Certification and Maintenance

Benchmarking through RBI Processes

Spares Strategies and Rationalisation

Valve Registers

In-Situ Testing

Complete Repair & Testing Facilities

Qualified and Competent Personnel

Engineering & Design Consultancy

Revision 0

V-Map: Valve Monitoring for Analysis and Performance

V-MAP continuously monitors, alerts and reports on valve and actuator performance. It is a passive, non-intrusive monitoring system that responds to every valve operation, planned or unplanned, partial or full, that:

Issues warning of performance deterioration before unacceptable levels are reached Eliminates the need for personnel at the valve’s location Provides trending, benchmark comparison, reports, and audit records Provides analysis that will identify maintenance requirements and provide reliability data for confirmation of Safety Integrity Levels (SILs) Gives remote access availability for valve expert analysis and support

The NeedThe monitoring of the condition of Emergency Shutdown Valves (ESDVs), on both onshore and offshore Oil and Gas installations, is an essential part of ensuring the safety of personnel, protection of the environment and capital assets. The failure of an ESDV to operate on demand, or fail to provide a shut off will have major impact.

To demonstrate that an ESDV’s performance meets the installation’s safety criteria, it is normally subjected to routines involving inspection, partial closure, full closure, and leakage tests. These routines often require special test equipment and trained personnel, and will involve a planned shutdown thereby interrupting production.

Hence, there is need for a system that automatically reports valve performance and addresses the safety and personnel issues. This need to continuously demonstrate performance is met by Score’s V-MAP development. Data is acquired remotely without the need for personnel to be in attendance. V-MAP will also acquire data for every valve operation, including spurious ESDVs, so building up a history of performance that can be used in-lieu of a planned shutdown test.

The DevelopmentV-MAP has been developed based on Score’s long term experience in valve and actuator design, diagnostics, data acquisition, and system design and construction. The basic monitoring techniques and principles have been well developed in the past. It is the hardware and software developments of recent years that have enabled those techniques and principles to be implemented in a cost effective modular system design. One that can be tailored to the specific monitoring requirements, communications and protocols of the installation’s automation system.

© Copyright Score Training 2010

The SystemV-MAP dedicated sensors are located on the valve and actuator and on the adjacent piping. The sensor types typically selected are:

Acoustic Emission leak detection sensors Strain gauges to measure the torque or force required by the valve Pressure transmitters to monitor the actuator fluid power requirement Position transmitter to measure the valve stroke

The V-MAP sensors are continuously logged by dedicated data acquisition units (DAUs). On detection of a valve operation the V-MAP server downloads the information from the DAUs and typically requests the following input from the installation’s automation databases:

Pipeline pressures and temperatures Actuator limit switch and solenoid status and timestamps ESDV event timestamps

Once the server has collected the raw data from the various sources, it is stored and the following functions performed to transform the data in to information:

Manipulation to obtain derived data The derived data is then analysed by use of proprietary algorithms for: Raising of alerts if performance characteristics exceed preset alarm or notification levels Comparison and trending with previous readings, benchmarks and design calculations Comparison of sensor outputs to detect sensor drift or malfunction Provision of summary reports

The Benefits of Using ScoreOver 25 years experience in valve and actuator technology, design, repair, and problem solvingExtensive experience in valve testing and monitoring techniquesV-MAP has been supplied to two major North Sea Projects, both on and offshore, eachwith over 40 critical ESDVsSpecialist engineers available worldwide with the backing of an over 1,400 employee OrganisationIndependent privately owned company

The Benefits of Using V-MapRemote monitoring of all valve operationsReduces site exposure for personnelAutomatic alerts and warnings of deteriorationMeasures compliance with acceptance criteriaFocuses maintenance activity Thereby maximises plant safety and availability and reduces costs

For Further information contact:

V-Map Team,

Glenugie Engineering Works, Peterhead, AB42 0YX

V-MAPinfo@score-group.com

Tel: +44 (0) 1779 480000

Score Group plcIntelligent Valve and Gas Turbine Solutionswww.score-group.com

Revision 01

TM

© Copyright Score Training 2011

Introduction

The V-Scan Diagnostic Analyser, developed by Score Group plc, is a system that allows for complete independent testing of any air operated control valve irrespective of the manufacturer.

The V-Scan Diagnostic Analyser generates industry specific tests, written by Score’s Diagnostic Engineers, providing an optimum method to collect data on critical trip and control valves. This enables clients to have confidence in the safety system as well as providing optimal maintenance requirements to ensure valve availability. Score’s V-Scan system can also be used in conjunction with the V-Map system providing enhanced performance and reliability of valves.

V-Scan is rapidly becoming the preferred ongoing data analysis tool for Score’s many clients in the (LNG) Oil and Gas and mining industries. It is a vital tool for fault finding within critical control valves and shutdown planning.

© Copyright Score Training 2010

The development of the V-Scan system was carried out by Score Group’s highly experienced instrumentation team and was based on extensive laboratory tests using valves, actuators and instrumentation from many different manufacturers. The team took account of the key demands specified by field technicians. These demands included requiring the system to be both lightweight and also robust with a long battery life. In addition, it was vital that the transducers used in the system had to be accurate and less susceptible to vibration compared to other data analysis units.

Not only were all of these requirements met with the development of Score’s V-Scan but as part of ongoing research and development, the system is constantly being assessed to maintain an easy-to-use setup application and fast, reliable delivery of results.

• An I/O box is used to transfer the information from sensors to the DAQ unit with a computer for analysis and data logging. • The V-Scan laptop is spill resistant and has anti-shock protection. • The whole system is designed to operate with extended battery life. • The system includes calibrated sensors which are assembled and tested in-house, including laser sensor technology.

• World leader in Independent Control Valve engineering. • Extensive experience in Shutdown planning using V-Scan. • More than 28 years experience in valve and actuator technology, design, repair and problem solving. • V-Scan used by major Oil and Gas companies for diagnostic analysis of critical control valves. • Specialist engineers available worldwide with the backing of an employee base of over 1400. • Independent, privately owned company. • Able to provide complete Diagnostic Strategies written specifically for each client.

V-Scan is a system that is easy to use with reliable results. The design is based on utilizing a series of calibrated sensors as well as pressure and displacement transducers which send signals to a portable laptop computer via an I/O box. Within the laptop, data acquisition (DAQ) software interprets the results and generates an engineering report. The final report provides a record of the valve specification for the applicable valve, the measured test parameters and engineering comments. The recommendations are included following an engineering review of the results. As Score is completely independent of any manufacturer, the results and recommendations are completely unbiased.

• Test results (Pass/Fail) are written for specific Valve application rather than generic manufacturer’s specifications. • System fully developed and supported in-house. • System is located in all major Score facilities worldwide. • Independent analysis of any manufacturer’s air operated control valves with the flexibility to enable the testing of any actuator with a single-acting or double-acting, linear or rotary valve, irrespective of manufacturer. • Fast, accurate results and an easy to use set up system.

The Development and Research

The System

System Specifics

The Benefits of Using Score Group plc

The Benefits of Using V-Scan

For Further information contact:

V-Scan Team,

Glenugie Engineering Works, Peterhead, AB42 0YX

customersupport@score-group.com

Tel: +44 (0) 1779 480000

Score Group plcIntelligent Valve and Gas Turbine Solutionswww.score-group.com

TM

© Copyright Score Training 2011

Whilst more than 60 percent of installed control valves have performance problems, many can be resolved without the need for removal from the production line. V-Scan provides a non-intrusive diagnostic tool that can be used as part of a condition based monitoring programme. This can assist in developing a detailed scope for pending shutdowns and will provide clients with an efficient and cost effective way of determining what repairs are actually required.

The V-Scan system was developed to operate independently of all manufacturers in order to provide unbiased and efficient results. It is a system that generates reliable and easy to interpret results, in the form of concise reports, whether it is being used in-house or on site. It is also flexible enough to allow for non generic tests as required for industry critical applications.

Advantages

Revision 01

CriticalityStrategyStock ManagementTrackingSalesPurchase

Valve & Projects Supply Scott Will, Technical Sales Director +44 (0) 1779 482051Valve Maintenance & Repair Trevor Fleming, Works Manager +44 (0) 1779 482049Valve Specialised Testing Services Ian Farrow, General Manager +44 (0) 1383 510510Subsea Valve Supply, Service & Overhaul Bill Urquhart, Managing Director Subsea/Wellhead +44 (0) 1779 482029Technical & Engineering Bruce Buchan, Quality Director +44 (0) 1779 482033Control Valve Diagnostics Geoff Miles, Managing Director Valve Solutions +61 (0) 89441 5999

046284 9771 )0( 44+ troppuS remotsuC ,retxaB nacnuD slortnoC dna noitamotuAValve Monitoring Stan Hale, Marketing Director of Valve Monitoring +1 770 428 4874 Inspection Services- Italy Marco Bertinotti, General Manager +39 (0) 2964 88523Industrial Gas Turbines Andrea Bowie, Customer Support +44 (0) 1779 482360Fuel Systems & Accessories Bruce Buchan, Fuel Systems Operations Director +44 (0) 1779 482370Surface Engineering & Treatments Andrew Bailey, Managing Director +44 (0) 1282 418312Practical Training Services James Duthie, Development Director +44 (0) 1779 482622Media & Promotional David Anderson, Managing Director Score Training +44 (0) 1779 482331

Revision 07

Score (Eastern Canada) Limited

159 McNamara Drive Paradise, NL

A1L 0A7CANADA

Tel: +1 (0) 709 782 6333 Fax: +1 (0) 709 782 6330

Score (Europe) LimitedUnit 8

Alpha Business ParkWhite House Road

IpswichSuffolkIP1 5LT

ENGLAND, UK

Tel: + 44 (0) 1473 242 460 Fax: + 44 (0) 1473 747 644

Score Energy LimitedIan M. Cheyne Building Glen Test Facility

WellbankPeterhead

AberdeenshireAB42 3GL

SCOTLAND, UK

Tel: + 44 (0) 1779 482 300 Fax: + 44 (0) 1779 482 345

Score TransCanada Limited

5135/55- 67th

AvenueEdmonton,

Alberta

T6B 2R8CANADA

Tel: +1 (0) 780 455 5273 Fax: +1 (0) 780 455 5276

Constant Systems LimitedLow MarchDaventryNorthantsNN11 4SD

ENGLAND, UK

Tel: + 44 (0) 1327 314146Fax: + 44 (0) 1327 314147

Score Energy Services (Nigeria) Limited

13 Sumbo Jibowu StreetIkoyi, Lagos 101233

NIGERIA

Tel: +234 (0) 709 876 6970

Score (Europe) LimitedThe Paragon Works

Woodend PlaceCowdenbeath

FifeKY4 8EE

SCOTLAND, UK

Tel: + 44 (0) 1383 510 510 Fax: + 44 (0) 1383 514 512

Score Atlanta Incorporated/Constant Systems

Incorporated975 Cobb Place Blvd.Suite 202, Kennesaw

Georgia 30144USA

Tel: +1 770 428 4874Fax: +1 770 428 4845

Score (Europe) Limitedr

44 Jafar Jabbarli StreetAZ1065 BakuAZERBAIJAN

Tel: +994 412 4372073Mob: +994 50 3373557

Score do BrasilEstrada São José e Imboassica s/n

Imboassica-Macaé -cep 27925-540Rio de Janeiro

BRAZIL

Tel: +55 (22) 2763 3134Tel: + 55 (12) 9740 5758

Fax: +55 (22) 2759 0823Score Danmark A/S

Oddesundvej 246715 Esbjerg N

DENMARK

Tel: +45 75 138283Fax: +45 75 139222

Score (Europe) LimitedSherwood HouseArmytage Road

BrighouseLeeds

HD6 1QFENGLAND, UK

Tel: + 44 (0) 1484 712222 Fax: + 44 (0) 1484 719027

Hycrome (Europe) LimitedWidow Hill Road

Heasandford Industrial EstateBurnley

BB10 2TTENGLAND, UK

Tel: + 44 (0) 1282 418 300Fax: + 44 (0) 1282 418 310

Score (Europe) Limited33-36 Southgates Road

Great YarmouthNorfolk, NR30 3LL

ENGLAND, UK

Tel: +44 (0) 1493 845760Fax: +44 (0) 1493 853003

Score (Europe) LimitedVia Isonzo No 5

22078 Turate COMOITALY

Tel: +39 02964 88523 Fax: +39 02964 87238

Score Asia Sdn Bhd Suite B Level 6, Block D

Manara ParkMegan Avenue 2

50450 Kuala LumpurMALAYSIA

Tel: + 60 3-21616641 Fax: + 60 3-21626640

Score (Europe) LimitedGlenugie Engineering Works

PeterheadAberdeenshire

AB42 0YXSCOTLAND, UK

Tel: + 44 (0) 1779 480 000Fax: + 44 (0) 1779 481 100

Score Valves (Trinidad & Tobago) Limited

87 Bejucal RoadCunupia, Trinidad, West Indies

TRINIDAD & TOBAGO

Tel: +1 868 (0) 693 0059Fax: +1 868 (0) 693 0294

Score Andes C.A.Calle 62 (Universidad) No. 5-32 Centro Comercial Villa Nueva

Local 7, Planta Alta Maracaibo, Estado Zulia

VENEZUELA

Tel: +58 261 7431891Tel: +58 261 7414573

Fax: +58 261 7423909

Score A/SRandabergveien 356

4070 RandabergStavangerNORWAY

Tel: + 47 51412300 Fax: + 47 51412323

Score Marine LimitedWellbankPeterhead

AberdeenshireAB42 3AE

SCOTLAND, UK

Tel: + 44 (0) 1779 485 500Fax: + 44 (0) 1779 482 048

Score Training And Multimedia Productions Limited

VITAL Training & Conference Centre

Wellbank, PeterheadAberdeenshire, AB42 3GL

SCOTLAND, UK

Tel: + 44 (0) 1779 482 333 Fax: + 44 (0) 1779 482 334

Score Energy Incorporated 1900 Tramway Road

SanfordNorth Carolina 27332

USA

Tel: +1 919 7752531 Fax: +1 919 7760654

Score Valve Services Incorporated

Building BHouston

Texas 77092USA

Tel: +1 713 574 9680Fax: +1 713 574 9679

Score (Brisbane) Pty Limited

Level 04,

247 Adelaide Street,Brisbane QLD 4000,

GPO Box 2453, Brisbane QLD 4001

AUSTRALIATel: +61 (7) 3112 5221 Fax: +61 (7) 3112 5101

Score Valve and Turbine Services

Mexico S.A. de C.VCalle 28 No.137 Col.

Centro 24100Cd. del Carmen, Camp

MEXICO

Tel: +52 (938) 1188604Cel: +52 (938) 1002535

Score A/SSandnessjØen

Randabergveien 3564070 Randaberg

StavangerNORWAY

Tel: + 47 51412300 Fax: + 47 51412323

PT. Score Energy Indonesia

Taman Tekno BSD Blok G1 No. 40 Setu,

Tangerang Selatan,Banten 15314,

Indonesia

Tel: + (62) 21 75881910Fax: + (62) 21 75881911

Score Energy

Level 18, Central Park152-158 St Georges Terrace

Perth,West Australia 6000

AUSTRALIATel: +61 (8) 9288 4581Fax: +61 (8) 9288 4589

Limited

Score (Europe) LimitedHorizons House

AberdeenAB11 5DE

SCOTLAND, UK

81-83 Waterloo Quay

Score Middle EastP.O. Box 261906

PBU - ZG7

Jebel

Ali FZENorth JAFZA

Dubai

UNITED ARAB EMIRATES

Tel: + 971 4 8876789 Fax: + 971 4 8876829

No 12 Jalan Yap Kwan Seng

Tel: + 55 (12) 3676 1297

PrototypingFeasibility StudiesExpeditingTechnical SupportProduct EnhancementInvestigation and Failure ReportsTechnical Bid EvaluationsDetailed Product Design Reviews

www.score-group.com

Score Group plc, Glenugie Engineering Works,

Peterhead,Aberdeenshire, UK, AB42 0YX

Tel: +44 (0) 1779 480 000 Fax: +44 (0) 1779 481 100E-mail: customersupport@score-group.com

Web: www.score-group.com

Drawing on a unique knowledge base of performance data, Score’s Engineering and Design Consultancy (EDC) provides clients with independent support at every stage of a project, from Front End Engineering through to commissioning and operation.

Score’s specialist engineering team utilise industry best practice and unique empirical data from continuous operational feedback to assist with selection, design, failure analysis and product enhancement.

This, coupled with involvement in international bodies and leadership in industry initiatives, makes Score’s EDC the only resource of its kind tailored to solve valve and actuator related problems.

Expertise & Facilities Available at Score’s EDC

3D Parametric CAD,from Part and Assemblymodelling to Professional 2D Draughting.

Specialist Services Provided by the EDC

Condition Monitoring & InstrumentationData LoggingSoftware Writing & Programming

The EDC’s control valve and PSV section offer application reviews, troubleshooting and failure analysis support. Their vast experience is enhanced with the use of manufacturers sizing software and independent software (CONVALTM) allowing detailed analysis of control valve problem areas such as cavitation, flashing, noise levels, energy dissipation and vibration and erosion potential.

The EDC has a complete team of specialists, with expertise in valve technologies, 3D modelling and draughting, FEA and CFD, condition monitoring, instrumentation, data logging and software writing. With a combined total experience of over 150 years between them, the EDC specialists are among the very best in the industry.

For further information contact:

Engineering & Design ConsultancyScore (Europe) LtdSherwood HouseArmytage Road

BrighouseHD6 1QF

United Kingdom

leeds.engineering@score-group.com

Tel: + 44 (0) 1484 712 222Fax: +44 (0) 1484 719 027

Engineering & Design Consultancy

Engineering CalculationsMathematical ModellingStandards verification & validation

Score Group plc Intelligent Valve and Gas Turbine Solutions

TM

Revision 0

Score Group plc www.score-group.com Intelligent Valve and Gas Turbine Solutions

TM

Score Group plc, Glenugie Engineering Works,

Peterhead,Aberdeenshire, UK, AB42 0YX

Tel: +44 (0) 1779 480 000 Fax: +44 (0) 1779 481 100E-mail: customersupport@score-group.com

Web: www.score-group.com

The new Computational Fluid Dynamics (CFD)facility is the latest inclusion to the expertise of the Engineering Group. With the CFD package, complex solid and fluid coupling problems can now be simulated and solved.

CFD analysis of a control valve, showing fluid flow paths, velocity, cavitation, and theircorrespondingfluid pressure on the solid parts.

Turbine blade simulation using CFD to determine efficiency, and also to analyse blade stress and deformation.

Coupled with the EDC’s experience in Finite Element Analysis and 3-D Parametric Modelling, the complete physics behind an engineering problem can be tackled.

From 3D modelling to finite-element meshing to solutions: the EDC’s comprehensive array of high-tech software is able to provide accurate engineering answers without the need for prototyping and/or actual lab tests – all done in the virtual environment, thus significantly cutting costs.

The EDC uses leading-edge 3D Parametric Computer-Aided Design (CAD) packages to produce extremely accurate models of parts and assemblies in the virtual environment. Coupled with this is our state-of-the-art Finite Element Analysis (FEA) suite, any 3D model parts and assemblies from CAD can be analysed.

Stress & Deformation AnalysisContact AnalysisHeat Transfer & ThermodynamicsNatural FrequenciesFatigue Life & Safety FactorsShape Optimisation

Cavitation AnalysisErosion AnalysisFlow AnalysisTurbine SimulationFree-Surface AnalysisThermofluid Simulation

Our CFD features include:

Our FEA features include:

ISO 9001Quality

ISO 14001Environment

OHSAS 18001Health & Safety

ISO/IEC 27001Information Security

Management

ISO/IEC 20000-1IT Service Management

Supplier: 40447

Score Group plcIntelligent Valve and Gas Turbine Solutions™

w w w. s c o r e - g r o u p . c o m

Intelligent Valve and Gas Turbine Solutions™

Score Group plcw w w. s c o r e - g r o u p . c o m

Glenugie Engineering WorksPeterheadAberdeenshireAB42 0YXSCOTLAND, UK

Tel: + 44 (0) 1779 480 000Fax: + 44 (0) 1779 481 100Email: customersupport@score-group.comWebsite: www.score-group.com

Approvals held within the Score group of companies include:

The information contained within this document is valid and correct at the time of printing, however we reserve the right to modify details without notice. For a copy of our latest literature please contact customersupport@score-group.com or download from www.score-group.com.

© Score Group plc, 2011

Valve Supply, Repair and Overhaul

Valve Automation and Control

Industrial Gas Turbine Services

Engineering and Design Consultancy

Condition Monitoring and Diagnostics

Fuel Systems Overhaul

Surface Treatments

●●●●●●●

Technical and Commercial Training

Valve Leak Detection

Enhanced Testing

Subsea Engineering Technology

Marine and Military Support

Cell Disruption

●●●●●●

ATEX9723EC

Services

Intelligent Valve & Gas Turbine Solutions