SCOOP - Flux AB · 2018. 1. 11. · SCOOP is available in three levels of functionality. SCOOP has...
Transcript of SCOOP - Flux AB · 2018. 1. 11. · SCOOP is available in three levels of functionality. SCOOP has...
![Page 1: SCOOP - Flux AB · 2018. 1. 11. · SCOOP is available in three levels of functionality. SCOOP has numerous light distributions (symmetric, circular or asymmetric). In the KEA variant,](https://reader036.fdocuments.us/reader036/viewer/2022063012/5fc9712e108d1705637e771d/html5/thumbnails/1.jpg)
The SCOOP luminaire is synonymous with novelty; it combines the fluidity and elegance of refined lines with the efficiency of LED solutions in an association that is resolutely innovative and contemporary.
The sobriety and discretion of SCOOP speaks an innovative and benevolent message, in current language.
SCOOP is available in three levels of functionality. SCOOP has numerous light distributions (symmetric, circular or asymmetric).
In the KEA variant, this luminaire uses the graphical charter of the KEA line, and thus participates in the coherence of this complete family of lighting and urban furniture.
SCOOP Luminaire design: Michel TORTEL
![Page 2: SCOOP - Flux AB · 2018. 1. 11. · SCOOP is available in three levels of functionality. SCOOP has numerous light distributions (symmetric, circular or asymmetric). In the KEA variant,](https://reader036.fdocuments.us/reader036/viewer/2022063012/5fc9712e108d1705637e771d/html5/thumbnails/2.jpg)
71
![Page 3: SCOOP - Flux AB · 2018. 1. 11. · SCOOP is available in three levels of functionality. SCOOP has numerous light distributions (symmetric, circular or asymmetric). In the KEA variant,](https://reader036.fdocuments.us/reader036/viewer/2022063012/5fc9712e108d1705637e771d/html5/thumbnails/3.jpg)
IP 66 IK 10RoHS<1% 0°- 5°
ULR
APPLICATIONS
• Mounting: top
• Carparks, parks and gardens, pedestrian paths, cycle paths.
• Recommended heights : 3,5 to 5 m
DESCRIPTION
• 2 models available - SCOOP: Flat polycarbonate transparent bowl - SCOOP KEA: Structured polycarbonate transparent bowl
• Models available in 3 levels: - 1E: Unique version for standard use - 2EA: Fixed settings for night dimming - 2EB: Fixed current setting at 700mA, without options - 3E: Most efficient and customizable version Injected die cast aluminium bottom and canopy
• Body, cover and base in die-cast aluminium
• Single Aluminium Grey polyester powder coating finish
• IP66
• IK10
• Class I or II
• ORALENS mono lense
• Colour temperature: 4000 K and 3000 K
• Luminaire eligible for Energy Saving Certificates
CITIZEN REFERENCE POINTS
• Materials used: Aluminium 77%, Plastic 17%, Steel 5%, Other 1%,
• Complies with the RoHS directive
• ULR<1%
• High recyclability rate
WATERPROOFING
• IP 66 waterproofing in accordance with the standard EN 60 529
• Extruded pneumatic silicone gasket
• Cable gland with anchoring device
• Breathing system with activated carbon filter
MECHANICAL INTERFACES
• Top cover fixing at the top of the Ø60/62mm pole, locked using 2 screws {1}
• Top cover pass through fixing with specific tip at the top of the Ø60/62mm pole, locked using 2 screws {2}
• Top cover pass through fixing with specific tip (see C tip p244) at the top of the Ø76mm pole, locked using 2 screws {3}
SCOOP KEA
SCOOP
SCOOP Luminaire design: Michel TORTEL
SCOOP:
3,5-5 m
1 2 3
Top cover on Ø 60/62 mm pole
Top pass through cover with specific tip on Ø
60/62 mm pole
Top pass through cover on Ø76 pole
1 2 3
LED LUMINAIRES
![Page 4: SCOOP - Flux AB · 2018. 1. 11. · SCOOP is available in three levels of functionality. SCOOP has numerous light distributions (symmetric, circular or asymmetric). In the KEA variant,](https://reader036.fdocuments.us/reader036/viewer/2022063012/5fc9712e108d1705637e771d/html5/thumbnails/4.jpg)
MAINTENANCE
Lighting equipment maintenance
Direct access to the circuit board
after removing the cover with 4
trapped screws (the cover is held by
a safety line) {1}
Source maintenance
In keeping with the state of the art
(initial assembly in dedicated rooms
for reasons of cleanliness, static
control and waterproofing…) it is
recommended that, in general, you
operate by standard exchange of
luminaires.
PHOTOMETRIC DISTRIBUTIONS
REDUCED FLUX VERSION WITH TWO PCBs
Glossary:
• Standard Option - Not available
E/L/P: Lighting/Luminance/Projection, R/C/T/F/P: Road/Circulation/Path/Beam/Pedestrian walkway, E/S/L/A/D/G: Narrow/Standard/Wide/Asymmetric/Right/Left, POLEDRIVE: preset at the bottom of the pole / night diming calculator with 2 configurable thresholds, set in the bottom of the pole, Dimming 5: night diming calculator with 5 configurable thresholds, Motion: moving sensor, Motion P: Configurable offset presence detector at the foot of the pole, Motion DALI: Detector integrated to the luminaire, adjustable at pole base, Motion 5: Motion sensor and dimming calculator, Motion COM: Wireless detection and communication, DALI: compatible with the DALI protocol, FC: Compensated flux
KEY POINTS
* ANF: Unique program for driver, Fixed Night Dimming: 23h – 5h at 350mA and 700mA for the remaining time
SCOOP / SCOOP KEA
Applications Carparks, parks and gardens, pedestrian paths, cycle paths.
Recommended heights 3,5 to 5 m
Mounting Wrapping or penetrating pole Ø 60/62 mm and Ø 76 mm with adapter. Screw locking
DimensionsØ
height580 mm247 mm
Weight 8 kg
Windage area 0,06 m²
Colour (•RAL to be chosen)grey aluminium
finish R3D3 • •
Specific LED
sources
LED Module 12 or 24 LED 24 LED 24 LED
Very high Efficiency LED - • •High Efficiency
LED • - -
Sources accessDirect access to the plate after removing the cover using
4 screws
Colour temperature
3000 K • • •4000 K • • •
Optics and light distribution options ERS, ERL ERL, ERS, ECL
Power supply current (mA) 700 mA A: ANF* / B: 700 mA 100 to 700 mA
OP
TIO
NS
POLEDRIVE (set in the bottom of the pole) - -
Dimming 5 (preset) - -
Motion (setting on site) - -
Motion 5 (preset) - -
Motion P (set in the bottom of the pole)
- -
Motion DALI (set in the bottom of the pole)
- - -
DALI (preset) - -
FC (preset) - -
Protection Driver
10 kv - - •8 kv - • -
4 kv • - -
ClassClass I - • •Class II • • •
Pre-wired -
Mechanical interfaces
Top cover Ø60/62 mm • • •
Top pass through Ø60/62 mm -
Top pass through Ø76 mm -
1E 2E A / B 3E
580
247
76
75
169
580
247
76
75
169
• Only available for level 1E
1
- 90 ° 90 °
- 45 ° 45 °
0
cd/klm
SCOOP/SCOOP KEA - ERL
Imax = 801 cd/klm
0 °810
C90 - C270C0 - C180C25 - C155 Pole setting
Isolux curve
- 90 ° 90 °
- 45 ° 45 °
0
cd/klm
SCOOP/SCOOP KEA - ERS
Imax = 1279 cd/klm
0 °1280
C90 - C270C0 - C180C15 - C165 Pole setting
Isolux curve
- 90 ° 90 °
- 45 ° 45 °
0
cd/klm
SCOOP/SCOOP KEA - ECL
Imax = 309 cd/klm
0 °310
C90 - C270C0 - C180C45 - C135 Pole setting
Isolux curve
73