SCIENTIFIC COMMITTEE 48thINTERNATIONAL OCTOBER CONFERENCE on Mining and Metallurgy

Prof. dr Dragana Živković (Serbia) – president, Prof. dr Radoje Pantović (Serbia) – v.president, Prof. dr Nada Štrbac (Serbia) – v. president, Prof. dr Svetlana Nestorović (Serbia) †, Dr Walter Valery (Australia), Prof. dr Boyan Boyanov (Bulgaria), Prof. dr Stoyan Groudev (Bulgaria), Prof. dr Jelena Penavin Škundrić (B&H), Prof. dr Sulejman Muhamedagić (B&H), Prof. dr Mirsada Oruc (B&H), Prof. dr Fathi Habashi (Canada), Prof. dr Vladimir Krstić (Canada), Prof. dr Yong Du (China), Prof. dr Faruk Unkić (Croatia), Prof. dr Mirko Gojić (Croatia), Prof. dr Heikki Jalkanen (Finland), Dr Jacques Yvon (France), Prof. dr Aleksandar Dimitrov (FYR Macedonia), Prof. dr Carl Heinz Spitzer (Germany), Dr Srećko Stopić (Germany), Prof. dr Costas Matis (Greece), Prof. dr Dimitris Panias (Greece), Prof. dr György Kaptay (Hungary), Prof. dr Iwao Katayama (Japan), Prof. dr Kemal Delijić (Montenegro), Prof. dr Žarko Radović (Montenegro), Prof. dr Krzystof Fitzner (Poland), Prof. dr Luis Filipe Malheiros (Portugal), Prof. dr Sanda Krausz (Romania), Dr Andrei Rotaru (Romania), Prof. dr Dimitriu Sorin (Romania), Prof. dr Petr M. Solozhenkin (Russia), Dr Slavomir Hredzak (Slovakia), Prof. dr Jakob Lamut (Slovenia), Prof. dr Jožef Medved (Slovenia), Dr Mirjam Jan-Blažić (Slovenia),

Prof. dr Seshadri Seetharaman (Sweden), Dr Magnus Ericsson (Sweden), Prof. dr Guven Onal (Turkey), Prof. dr Onuralp Yucel (Turkey), Prof. dr Batrić Pešić (USA), Prof. dr Velimir Radmilović (USA), Prof. dr Vladislav Kecojević (USA), Dr Ana Kostov (Serbia), Prof. dr Andjelka Mihajlov (Serbia), Prof. dr Branka Jordović (Serbia), Prof. dr Desimir Marković (Serbia), Prof. dr Dragoslav Gusković (Serbia), Prof. dr Duško Minić (Serbia), Prof. dr Endre Romhanji (Serbia), Prof. dr Karlo Raić (Serbia), Dr Mile Bugarin (Serbia), Prof. dr Milan Antonijević (Serbia), Prof. dr Mile Dimitrijević (Serbia), Dr Milenko Ljubojev (Serbia), Prof. dr Mirjana Rajcić Vujasinović (Serbia), Prof. dr Dragan Manasijević (Serbia), Dr Miroslav Sokić (Serbia), Dr Nadežda Talijan (Serbia), Prof. dr Nenad Vušović (Serbia), Prof. dr Nenad Radović (Serbia), Prof. dr Nedeljko Magdalinović ( Serbia), Prof. dr Rodoljub Stanojlović (Serbia), Prof. dr Svetlana Ivanov (Serbia), Prof. dr Tatjana Volkov-Husović (Serbia), Prof. dr Zoran Marković (Serbia), Dr Zvonko Gulišija (Serbia), Prof. dr Vitomir Milić (Serbia), Prof. dr Vlastimir Trujić (Serbia), Dr Vladan Ćosović (Serbia), Prof. dr Željko Kamberović (Serbia), Prof. dr Živan Živković (Serbia)

ORGANIZING COMMITTEE 48th INTERNATIONAL OCTOBER CONFERENCE on Mining and Metallurgy

Prof. dr Nada Štrbac -president Doc. dr Ljubiša Balanović Doc. dr Ivana Marković Prof. dr Svetlana Ivanov Prof. dr Dragoslav Gusković Prof. dr Dragan Manasijević Prof. dr Snežana Urošević Dr Ana Kostov Doc. dr Vesna Grekulović Doc. dr Srba Mladenović

Doc. dr Saša Stojadinović Doc. dr Aleksandra Mitovski Doc. dr Dejan Petrović Doc. dr Milan Gorgievski Doc. dr Milan Radovanović M.Sc. Uroš Stamenković M.Sc. Žaklina Tasić M.Sc. Sandra Vasković, prof. engl. B.Sc. Oliver Marković, eng.

- 1 -

Conference is financially supported by The Ministry of Education, Science and

Technological Development Republic of Serbia

- 3 -

Silver Donors

Friends of the Conference

Media support

Municipality of Bor RTB Bor Group

TIR - Smelter and Refinery RBB - Copper Mines Bor

Pometon TIR d.o.o. Bor

Podrum ILIĆ Rečka

5

F I N A L P R O G R A M

SCHEDULE OF EVENTS Wednesday, September 28, 2016

17:00 – 19:00 – Conference desk opening / Registration of participants Thursday, September 29, 2016

08:00 – 19:00 - Conference desk working hours / Registration of participants 10:00 – 10:30 – Conference opening 10:30 – 12:00 – Plenary lectures

1. Nobuyuki Masuda (Japan) Regal provisions and technologies applied to the environment issues on mining in Japan

2. Iztok Naglič, Albert Martin-Conesa, Luka Kelhar, Barbara Malič, Spomenka Kobe, Boštjan Markoli (Slovenia) Phase transformations and magnetic properties of Ni-Mn-Ga alloy with addition of Cu

3. Dragana Živković, Nada Štrbac, Jakob Lamut, Miroslav Sokić (Serbia) Review of the results and activities in the field of archaeometallurgical findings investigations from different localities in eastern Serbia

12:00 – 12:15 – Sponsor presentations – FUGRO 12:15 – 13:00 –Coffee break 15:00 – 18:00 – Session 1 – Room A

15:00 – 15:20 – Section lectures 1 Milovan Vuković, Snežana Urošević (Serbia)

Studying the corporate socal responsibility practice in extractive industries 15:20 – 18:00 – Oral presentations 1

15:00 – 18:00 – Session 2 – Room B 15:00 – 15:20 – Section lectures 2

Miloš Tanasijević (Serbia) A fuzzy-based decision support model for evaluation of mining machinery

15:20 – 18:00 – Oral presentations 2 18:00 – 19:00 – Poster Section 1 with coffee – Hotel lobby 20:00 – 23:00 – Conference Dinner

Friday, September 30, 2016 08:30 – 19:00 - Conference desk working hours 10:00 – 13:00 – Excursion to RTB Bor 15:00 – 15:30 – Plenary lectures 4 Tomaš Havlik, Andrea Miskufova (Slovakia)

A method of valuable metals recovery from secondary raw materials: Hydrometallurgy 15:30 – 18:00 – Session 3 – Room A

15:30 – 18:00 – Oral presentations 3 18:00 – 19:00 – Poster Section 2 with coffee – Hotel lobby 18:00 – 19:30 – 3rd International Student Conference on Technical Science 19:30 – Closing of the Conference.

Saturday, October 1, 2016 Facultative excursions

3rd International Student Conference on Technical Science – ISC2016, will be held in the frame of IOC 2016.

Oral presentations are limited to 10 min, and after every 5 presentations discussions of presented papers should follow.

During the Conference working days, sponsors exhibition will be organized in the hall of Hotel Albo.

6

LIST OF PRESENTATIONS Thursday, September 29, 2016 at 10:30 – 12:00, Room A

Chairmen: Nada Štrbac, Dragana Živković, Grozdanka Bogdanović, Ana Kostov

Plenary lectures 1. Nobuyuki Masuda (Japan)

Regal provisions and technologies applied to the environment issues on mining in Japan

2. Iztok Naglič, Albert Martin-Conesa, Luka Kelhar, Barbara Malič, Spomenka Kobe, Boštjan Markoli (Slovenia) Phase transformations and magnetic properties of Ni-Mn-Ga alloy with addition of Cu

3. Dragana Živković, Nada Štrbac, Jakob Lamut, Miroslav Sokić (Serbia) Review of the results and activities in the field of archaeometallurgical findings investigations from different localities in eastern Serbia

Session 1 - Oral Lectures Thursday, September 29, 2016 at 15:00 – 18:00, Room A

Chairmen: Nobuyuki Masuda, Boštjan Markoli, Zdenka Zovko-Brodarac, Velizar Stanković

Section lectures 1 1. Milovan Vuković, Snežana Urošević (Serbia)

Studying the corporate socal responsibility practice in extractive industries

Oral presentation 1 1. Daizo Ishiyama, Ljubisa Obradović, Vladan Marinković, Stefan Đorđievski,

Hinako Sato, Vojka Gardić, Jelena Petrović, Hiroshi Kawaraya, Yasumasa Ogawa, Nobuyuki Masuda, Atsushi Shibayama, Zoran Stevanović (Japan) Recent advance of environmental evaluation on mining activity based on combination of different types of geochemical maps: An example in Bor mining area, Serbia

2. Yasushi Takasaki, Shigeru Kawamura, Kazutoshi Haga, Atsushi Shibayama, Ryo Inoue, Kazunari Suzuki (Japan) Effect of interrupted current time on the oxide layer formation onto the Pb-Ag anode for zinc electrowinning

3. Zdenka Zovko-Brodarac, Davor Stanić, Tamara Holjevac-Grgurić (Croatia) Solidification sequence of innovative AlSi7MgCu alloy

4. Irena Nikolić, Smilja Marković, Vuk Radmilović, Velimir Radmilović (Montenegro) Correlation between hydration progress and strength of alkali activated slag: Influence of alkali ion

7

5. Milena Tadić, Ivana Milašević, Dijana Đurović, Irena Nikolić (Montenegro) Simultaneous removal of Cu and Zn from aqueus solution with fly ash and bauxite based geopolymers

6. Vasily Lutsyk, Vera Vorob’eva (Russia) Spatial t-x-y diagrams Bi-Au-Sb & Bi-Au-Ag

7. Marijana Majić-Renjo, Lidija Ćurković, Krešimir Grilec, Zrinka Šokčević (Croatia) Wear performance of slip cast monolithic and composite ceramics

8. Nataša Vukićević, Vesna Cvetković, Jasmina Stevanović, Jovan Jovićević (Serbia) Alloy formation by Al and Nb electrodeposition from chloroaluminate low temperature melt

9. Irena Žmak, Tomislav Filetin, Faruk Unkić (Croatia) Ductile iron microstructure prediction based on melt thermal analysis using artificial neural networks

10. Bagdaulet Kenzhaliyev, Ainur Berkinbayeva, Zamzagul Dosymbaeva, Rustam Sharipov, Marzhan Chukmanova, Essen Suleimenov (Kazakhstan) Using the composite electrode for the organization of aligned electrochemical reactions during the extraction of metals from raw materials

11. Vesna Cvetković, Nataša Vukićević, Jasmina Stevanović, Jovan Jovićević (Serbia Magnesium oxide nanowhiskers electrochemically synthetized from nitrate melts

12. Johannes Rauch, Michael Potesser (Austria) Application and results of OXIPYR® diluted combustion in copper furnaces

13. Ivana Mladenović-Ranisavljević, Ljiljana Takić, Milovan Vuković (Serbia) Water pollution of the Danube according to the content of metals in water

14. Ljiljana Takić, Ivana Mladenović-Ranisavljević (Serbia) Environmental assessment of the Danube river in Serbia in the function of nutrients

Session 2 - Oral Lectures Thursday, September 29, 2016 at 15:00 – 18:00, Room B

Chairmen: Sonja Milićević, Miloš Tanasijević, Radoje Pantović, Saša Stojadinović

Section lectures 1 1. Miloš Tanasijević (Serbia)

A fuzzy-based decision support model for evaluation of mining machinery

Oral presentation 2 1. Saša Stojadinović, Miodrag Žikić, Miodrag Denić (Serbia)

Damage claims – the importance of expert witnesses

2. Sonja Milićević, Vladan Milošević, Dragan Povrenović, Jelena Čarapić, Ana Popović (Serbia) Adsorption in a column system with the recirculation

3. Aca Jovanović, Andreas Jungamann, Mile Bugarin (Serbia) Possibility of lignite enrichment by dry X-ray sensor sorting technology

8

4. Maja Čavić, Marko Penčić, Jelena Đoković, Miodrag Zlokolica (Serbia) Comparative analysis of the loader bucket mechanisms

5. Jelena Đoković, Ružica Nikolić, Jan Bujnak (Serbia) Analysis and prevention of the gravel conveyor's gear shaft fracture

6. Dejan Tanikić, Zoran Stević, Nada Štrbac, Miodrag Žikić, Saša Kalinović (Serbia) Monitoring of the electrical components using the IR camera

7. Nevena Milanović, Vesna Zvekić, Katica Popov (Serbia) Comparative analysis of bucket excavator and hydraulic excavator

8. Ana Popović, Sonja Milićević, Vladan Milošević, Jelena Čarapić, Dragan Povrenović (Serbia) The impact of lime milling from limekiln "Zagrađe" on the pH value of the pulp

9. Dragan Radulović, Ljubiša Andrić, Slavica Mihajlović, Vladimir Jovanović, Milan Petrov (Serbia) Obtaining fillers based on limestone from deposit Možura" – Ulcinj, for applications in various industries

10. Miodrag Žikić, Saša Stojadinović, Dejan Tanikić, Milena Miljković, Milan Živković, Stojan Mitrović, Daniel Kržanović (Serbia) Analysis of operational truck tire life at Veliki Krivelj open pit copper mine

11. Duško Đukanović, Igor Svrkota (Serbia) Analysis of ventilation systems in Serbian underground coal mines

12. Daniel Kržanović, Dejan Stevanović, Radmilo Rajković, Milenko Jovanović, Miodrag Žikić, Saša Stojadinović (Serbia) Optimization the final contour of the open pit North mining district using the software package Whittle

Session 3 - Oral Lectures Friday, October 30, 2016 at 15:00 – 18:00, Room A

Chairmen: Tomaš Havlik, Masahiko Bessho, Shehret Tilvaldyev, Lidija Ćurković

Plenary lectures 4 1. Tomaš Havlik, Andrea Miskufova (Slovakia)

A method of valuable metals recovery from secondary raw materials: Hydrometallurgy

Oral presentation 3 1. Masahiko Bessho (Japan)

Recovery of silica supersaturated in geothermal water by natural organic polymer

2. Shehret Tilvaldyev, Jesús Chavarría-Loya, Michelle Cota, Alejandra Flores-Ortega (Mexico) Analysis of the spaceports locations around the planet earth

3. Lidija Ćurković, Davor Ljubas, Veronika Marinović, Sandra Babić, Mirta Čizmić, Marijana Majić-Renjo (Croatia) Photocatalytic degradation of methyl orange by sol-gel TiO2 films

4. Milena Tadić, Bojana Zejak (Montenegro) Passive system for treating acid mine drainage

9

5. Shehret Tilvaldyev, Obed Molina-Santoyo, Itzel D. Cardenas-Dominguez, Hogla Krystal Sanchez-Olguin, Rene Noriega (Mexico) Advance aerodynamic blades for vertical axis wind turbine

6. Vladimir Topalović, Srđan Matijašević, Jelena Nikolić, Marija Đošić, Snežana Grujić, Sonja Smiljanić (Serbia) 3D bioactive phosphate glass-ceramic scaffolds prepared by the foam replica technique

7. Milan Čekerevac, Ljiljana Nikolić-Bujanović, Mladen Zdravković, Milena Tomić (Serbia) Synthesis of calcium tetraoxoferrate(vi) adduct

8. Nikola Bajić, Darko Veljić, Zoran Radosavljević, Mihailo Mrdak, Jasmina Pekez, Zoran Karastojković (Serbia) Applying brazing for repairing electrical contacts

9. Zoran Slović, Tomislav Bradarić, Nataša Slović (Serbia) The effect of (%Fetot. + %MnO) on final sulfur steel content at the end of Vd ladle treatment

10. Predrag Stolić, Borislav Đorđević (Serbia) Some considerations about development of future big data oriented file systems

11. Dženana Bečirhodžić, Erna Tutić, Adnan Mujkanović, Sadmir Bašić (Bosnia and Herzegovina) The use of waste foundry sand in production of slag concrete blocks

12. Mladen Mirić, Miloš Đorđević, Biljana Arsić, Dragan Đorđević, Saša Marjanović, Svetlana Ivanov (Serbia) Application of principal component analysis in the investigation of Au alloys without Ag

13. Samah Alghoul, Ali Hatab (Libya) Optimizing heating and cooling energy consumption for lightweight concrete buiding wall

14. Ali Hatab, Ahmad Falahati, Anette Danninger (Libya) Effects of multi-stretching and re-aging processes on yield strength of 6061-T6 aluminum alloy

15. Khalid Jaballa, Ghassan Elmasry, Benur Maatug, Mustafa El-Musbahi (Libya) Design the optimal sizing storage tank for domestic hot water system in Tripoli – Libya

16. Dušan Orač, Ivana Kobialkova, Tomaš Havlik, Vieroslava Baksova (Slovakia) Using Cu2+ ion for copper leaching from printed circuit boards

Poster presentations Poster Section 1 Thursday, September 29, 2016 at 18:00 – 19:00 – Hotel lobby

Chairmen: Daizo Ishiyama, Milovan Vuković, Vasily Lutsyk, Rustam Sharipov 1. Vanya Gandova, Kristina Lilova, Georgui Vassilev (Bulgaria)

Experimental investigation of Ni-Sn-Zn phase around the Sn-Zn binary eutectic

10

2. Milan Radovanović, Ana Simonović, Marija Petrović-Mihajlović, Žaklina Tasić, Snežana Milić, Milan Antonijević (Serbia) 4(5)-methylimidazole as brass corrosion inhibitior in 3% NaCl solution

3. Drage Petreski, Elenior Nikolov, Andrej Iliev (Macedonia) The impact of technology on the efficience of engineer support

4. Žarko Radović, Zoran Matijašević, Marina Mrkić (Montenegro) Structure of cast and ESR ingots of tool steels

5. Kornel Bortnyik, Peter Barkoczy, Emese Ivanics (Hungary) Cluster analysis of compound phases in 3003 Al alloy

6. Nebojša Tadić, Mitar Mišović (Montenegro) Plane deformation in process of cold rolling

7. Nataša Tomić, Aleksandar Marinković, Ahmed Allgelai, Vesna Radojević, Radmila Jančić-Heinemann (Serbia) Determination of initiating moieties in random grafted EVA-G-PMMA polymer

8. Farida Kapsalamova, Bagdaulet Kenzhaliyev, Vladimir Mironov (Kazakhstan) Features of structuring iron based coating obtained using gas flame surfacing method

9. Georgi Patronov, Boyan Boyanov (Bulgaria) Exergy assessment of the sustainability of zinc production

10. Boyan Boyanov, Georgi Patronov (Bulgaria) Oxidation of HgS and cinnabar and its environmental impact

11. Mirjana Rajčić-Vujasinović, Vesna Grekulović, Zoran Stević (Serbia) Potentiostatic oxidation of AgCu50 alloy in a chlorine solution with presence of cysteine

12. Kazutoshi Haga, Baisui Han, Yasushi Takasaki, Atsushi Shibayama (Japan) Recovery of copper from mine tailing by pressure oxidation leaching and solvent extraction

13. Sachi Wakasa, Vladan Marinković, Tomomi Takeda, Stefan Đorđievski, Shinsaku Nakamura, Kazuyo Hirose (Japan) Distribution of tailing deposit around Bor mine deduced from satellite images

14. Ljiljana Nikolić-Bujanović, Milan Čekerevac, Milena Tomić, Mladen Zdravković (Serbia) Ferrate(vi) stability in the process of electrochemical synthesis depending on anode material and electrolyte type

15. Marko Pavlović, Marina Dojčinović, Sanja Martinović, Milica Vlahović, Zoran Stević, Tatjana Volkov-Husović (Serbia) Cavitation damage of mullite ceramic: implementation of image analysis

16. Zorica Lopičić, Mirjana Stojanović, Jelena Milojković, Marija Mihailović, Marija Petrović, Tatjana Šoštarić, Mirjana Kijevčanin (Serbia) Effect of temperature on copper sorption by mechanically treated LCW particles

17. Sulejman Muhamedagić, Mirsada Oruč, Azra Halilović, Selvedin Hrustić (Bosnia and Herzegovina) X-ray structural analysis of agglomerates depending on the content of wüstite (FeO)

11

18. Slobodan Radosavljević, Jovica Stojanović, Ana Radosavljević-Mihajlović, Aleksandar Pačevski, Vladimir Stojanović (Serbia) Mıneralogıcal and chemıcal analyses of the polymetallic ore zone ''AZNA'' from the rudnık mine, Serbıa

19. Zoran Janjušević, Zoran Karastojković, Nikola Bajić, Mihailo Mrdak, Milesa Srećković (Serbia) Characteristics of plasma and laser cladding on stainless steel for exhaust motor valves

20. Anja Terzić, Marko Pavlović (Serbia) Kinetics of gibbsite leaching in sodium hydroxide aqueous solution

21. Stoja Rešković, Ivan Jandrlić, Tin Brlić (Croatia) Stress distribution in deformation zone

22. Branka Kaluđerović, Milesa Srećković, Milovan Janićijević, Dragana Vručinić, Aleksander Kovačević, Slobodan Bojanić, Dragan Druzijanić (Serbia) Interaction of laser beams with carbon-based materials

23. Branka Kaluđerović, Vesna Mandušić, Đuro Čokeša, Vladimir Dodevski, Sanja Krstić, Dragana Vručinić (Serbia) Carbonaceous material obtained by hydrothermal carbonization process – antimicrobial effects

24. Branislav Marković, Miroslav Sokić, Ilija Ilić, Vaso Manojlović, Zvonko Gulišija, Dragana Živković, Nada Štrbac (Serbia) Recycling of metals from exergy point of view

25. Marija Mihailović, Zvonko Gulišija, Aleksandra Patarić, Milentije Stefanović (Serbia) Some properties of hot forged Ti-6Al-4V alloy parts aimed for surgical implants

26. Miroslav Sokić, Vladislav Matković, Branislav Marković, Vaso Manojlović, Željko Kamberović, Nada Štrbac, Dragana Živković (Serbia) Reduction of refractory barite-sulphide ores

27. Tamara Holjevac-Grgurić, Dragana Živković, Dragan Manasijević, Ivan Anžel, Stjepan Kožuh, Ivana Ivanić, Mirko Gojić (Croatia) Kinetic analysis of Cu-8.3 wt.%Al-9.4 wt.% Mn shape memory alloy

28. Hasan Avdušinović, Almaida Gigović-Gekić, Ermin Jašarević (Bosnia and Herzegovina) Influence of tempering temperature on microstructure and hardness of ductile iron samples

29. Vesna Grekulović, Mirjana Rajčić-Vujasinović, Zoran Stević, Aleksandra Mitovski (Serbia) Electrochemical behavior of Ag, Cu and AgCu50 alloy in an alkaline solution in presence of 2- mercaptobenzothiazole

30. Srećko Manasijevic, Zdenka Zovko-Brodarac, Natalija Dolić, Radomir Radiša, Novica Davitkov (Serbia) The Al-fin bond between two materials (an aluminum piston alloy and an austenitic cast iron)

31. Milena Premović, Duško Minić, Dragan Manasijević, Ljubiša Balanović, Aleksandar Đorđević, Dušan Milisavljević (Serbia) Electrical conductivity of ternary Al-Cu-Sb and Bi-Ge-Sb alloys

12

32. Duško Minić, Milena Premović, Dragana Živković, Srđan Jović, Aleksandar Marković, Milica Tomović (Serbia) Microstructural investigation of ternary Al-Cu-Sb and Bi-Ge-Sb alloys

33. Radmilo Nikolić, Miodrag Denić, Nenad Vušović, Igor Svrkota, Aleksandra Fedajev, Silvana Ilić (Serbia) Current state and possibilities for further development of Serbian underground coal mining

34. Milan Trumić, Dragana Marilović, Maja Trumić, Grozdanka Bogdanović (Serbia) The influence of particle size distribution and height layer of raw material on screening kinetic

35. Grozdanka Bogdanović, Velizar Stanković, Dejan Antić, Milan Trumić, Darko Milićević, Maja Trumić (Serbia) Acid leaching of low-grade copper ores

Poster Section 2 Friday, September 30, 2016 at 18:00 – 19:00 – Hotel lobby

Chairmen: Miroslav Sokić, Tamara Holjevac Grgurić, Vanya Gandova, Farida Kapsalamova 1. Snežana Ignjatović, Dragana Đurić, Radoje Pantović, Ivana Vasiljević, Ilija

Vasiljević (Serbia) 2D geophysical – geological modeling

2. Slađana Alagić, Mile Dimitrijević, Snežana Tošić, Maja Nujkić, Dragana Medić (Serbia) Copper uptake by the grapevine and peach tree from the Bor region: A comparison

3. Slađana Alagić, Snežana Tošić, Mile Dimitrijević, Maja Nujkić, Tanja Petrović (Serbia) Ratio of copper concentrations between plant parts of the grapevine and peach tree as possible indication of copper pollution

4. Vladan Miljković, Marijana Pavlov-Kagadejev, Aleksandar Radivojević, Viša Tasić, Valentina Miljković (Serbia) Analysis of thermal losses on electrolytic bath joints in electrolytic refinery

5. Viša Tasić, Marijana Pavlov-Kagadejev, Vladan Miljković, Dragan Jovanović, Ljubiša Stamenković (Serbia) Application of thermal imaging for preventive maintenance in the electrolytic refining plant

6. Mira Cocić, Mihovil Logar, Viša Tasić, Snežana Dević, Saša Cocić (Serbia) Phase composition of glass-ceramics obtained by crystallization of basalt glass

7. Aleksandra Ivanović, Biserka Trumić, Saša Marjanović, Svetlana Ivanov, Silvana Dimitrijević, Vesna Marjanović (Serbia) PdNi5 alloy: The effect of homogenization annealing on the microstructure, mechanical and electrical properties

8. Lidija Gomidželović, Jožef Medved, Dragana Živković, Emina Požega, Ana Kostov (Serbia) General solution model: thermodynamic properties of alloys from copper corner of Cu-Al-Mn system

13

9. Ana Kostov (Serbia) Thermodynamic analysis of Al-Mn binary alloys system by FACT-SAGE

10. Ana Kostov, Zdenka Stanojević-Šimšić, Aleksandra Milosavljević, Radiša Todorović, Corneliu Craciunescu, Victor Budau (Serbia) Microstructural analysis of copper-based shape memory alloys

11. Silvana Dimitrijević, Mirjana Rajčić-Vujasinović, Stevan Dimitrijević, Biserka Trumić, Aleksandra Ivanović (Serbia) Stability of gold complex based on mercaptotriazole at pH=2

12. Snežana Šerbula, Jelena Milosavljević, Ana Radojević, Jelena Kalinović, Tanja Kalinović, Ljiljana Lekić (Serbia) Air pollution with As, Pb and Cd in the Bor region from 2009 to 2015

13. Snežana Šerbula, Dragana Živković, Nada Štrbac, Maja Savov, Jelena Kalinović (Serbia) Seasonal monitoring of total suspended particles around the copper smelter in Bor (Serbia)

14. Dragana Ćosić, Snežana Šerbula, Milan Antonijević, Dragana Živković, Nada Štrbac (Serbia) The kinetics of ion exchange of copper (ii) ions on lewatit tp 207

15. Branka Pešovski, Milan Radovanović, Snežana Milić, Danijela Simonović, Vesna Krstić (Serbia) Different kinds of dimensionally stable anodes in the electrolysis processes

16. Marijana Pavlov-Kagadejev, Viša Tasić, Vladimir Despotović, Vladan Miljković, Darko Brodić (Serbia) Distribution of electrical energy costs and its impact on the total costs of the copper production

17. Biserka Trumić, Aleksandra Ivanović, Silvana Dimitrijević, Vesna Krstić, Saša Marjanović, Ljubica Radović, Stevan Dimitrijević (Serbia) Modern industrial alloys based on platinum

18. Emina Požega, Pantelija Nikolić, Slavko Bernik, Lidija Gomidželović, Đorđe Veljović, Stevan Vujatović, Milan Radovanović (Serbia) Part i: Hall measurements of bisbtese single crystal doped with Zr

19. Emina Požega, Pantelija Nikolić, Slavko Bernik, Lidija Gomidželović, Đorđe Veljović, Stevan Vujatović, Milan Radovanović (Serbia) Part ii: Hall measurements of bisbtese single crystal doped with Zr

20. Slavica Miletić, Dejan Bogdanvić, Valentina Valinov (Serbia) Process model for sustainable business of mining companies

21. Radmila Marković, Dragana Božić, Vesna Marjanović, Vojka Gardić, Nobuyuki Masuda, Masahiko Bessho, Branimir Jugović (Serbia) Acid mine drainage treatment through a two-step neutralization process with slaked lime

22. Radmila Marković, Vesna Marjanović, Dragana Božić, Nobuyuki Masuda, Suzana Stanković, Zoran Stevanović, Branimir Jugović (Serbia) Polyacrylamide flocculants for solid particles settling in neutralization process of mine water

23. Vesna Conić, Srđan Stanković, Ivana Morić, Suzana Dragulović, Dragan Milanović, Srđana Magdalinović, Mile Bugarin (Serbia) Adaptation of microorganisms to the polymetallic ore

14

24. Suzana Dragulović, Vesna Conić, Dragan Milanović, Srđana Magdalinović, Mile Bugarin, Vlastimir Trujić (Serbia) Possibility of pure barium sulphate obtaining bioleaching residue of polymetallic ore

25. Milan Gorgievski, Nada Štrbac, Dragana Božić, Velizar Stanković, Dragana Živković (Serbia) Corn silk – A novel adsorbent for the adsorption of copper ions from aqueous solutions

26. Miomir Mikić, Sanja Petrović, Ivana Jovanović, Radmilo Rajković (Serbia) Reclamation the inner landfill of the coal open pit cementara in Pljevlja, Montenegro

27. Ivana Jovanović, Miomir Mikić, Milenko Ljubojev, Dragan Milanović, Zoran Stević (Serbia) ANFIS model for predicting the copper concentrate grade

28. Ivana Jovanović, Miomir Mikić, Srđana Magdalinović (Serbia) Modeling of froth flotation processes by population balance approach – A short review

29. Stefan Đorđievski, Marija Milivojević, Jelena Đorđević, Jelena Petrović, Radojka Jonović, Ljiljana Avramović, Radmila Marković (Serbia) Heavy metals and arsenic in soil, corn and wheat from municipality of Bor, Serbia

30. Uroš Stamenković, Svetlana Ivanov, Ivana Marković (Serbia) Effect of ageing temperature on properties of EN-AW 6060 aluminium alloy

31. Tamara Urošević, Zorica Sovrlić, Nevenka Petrović, Ivan Svrkota, Radmila Marković, Marija Milivojević, Jelena Petrović (Serbia) Citrus fruits peels as biosorbent for sorption heavy metals, copper and zinc

32. Sima Razmjooei, Mahmoud Abdollahy, Mohammad Reza-Khalesi, (Iran) The effect of gas dispersion parameters on entrainment in mechanical flotation cells

33. Zorica Sovrlić, Tamara Urošević, Radmila Marković, Tatjana Apostolovski-Trujić, Renata Kovačević, Kazutoshi Haga, Nobuyuki Masuda (Serbia) Concentrations of anions and cations in the waste water in Bor municipality in different weather conditions

34. Zoran Stević, Mirjana Rajčić-Vujasinović, Ilija Radovanović, Miša Stević (Serbia) Application of IR thermography in fruit growing

35. Ivana Marković, Desimir Marković, Srba Mladenović, Radiša Todorović, Ana Kostov (Serbia) Effect of annealing temperature on the properties of rolled Cu-Pd alloys

36. Ivana Marković, Svetlana Ivanov, Dragoslav Gusković, Desimir Marković, Dragana Živković, Uroš Stamenković (Serbia) Microstructure of thermomechanically treated EPM copper-platinum alloy

37. Sanja Petrović, Grozdanka Bogdanović (Serbia) Chalcopyrite leaching in acid solutions using hydrogen peroxide as oxidizing agent

38. Dragan Manasijević, Duško Minić, Milena Premović, Dragana Živković, Ljubiša Balanović (Serbia) Experimental investigation of the Cu-Ge-Sb phase diagram at 500 °c

39. Dejan Petrović, Vitomir Milić, Igor Svrkota, Saša Stojadinović (Serbia) Costs of norm materials and their percent in the ore excavation expenses

40. Milenko Jovanović, Miroslava Maksimović, Branislav Rajković, Miomir Mikić, Radmilo Rajković (Serbia) Determination of the quality and purpose of bentonite (bentonite clay – from the site Tijovac near the Svrljig)

15

University of Belgrade

Technical Faculty in Bor

3rd International Student Conference on Technical Science

F I N A L P R O G R A M

Friday, September 30, 2016, 18:00 – 19:00

17:00 – 18:00 – Registration of participant

18:00 – Opening note: Prof. dr Dragana Živković - President of the Scientific Committee 3rd ISC2016 Doc. dr Ljubiša Balanović - President of the Organizing Committee 3rd ISC2016

18:10 – 18:50 – Oral presentation

1. PhD Student: Dženana Bečirhodžić; Mentor: Adnan Mujkanović; (Bosnia and Herzegovina) Aerogel – A promising future thermal building insulation material

2. PhD Student: Erna Tutić; Mentor: Adnan Mujkanović; (Bosnia and Herzegovina) Material of the future – Self-healing concrete

3. Students: Dusan Mrđenović, Milica Miletić–Svirčev, Takuya Ishiguro, Shigehiro Uchiya, Kanako Chisaki Shimizu, Keisuke Yoshino, Shingo Ishida, Kenta Echigoya, Hitomi Sato, Kosuke Jin, Dragana Marilović, Milica Bosković; Mentors: Daizo Ishiyama, Grozdanka Bogdanović; (Serbia, Japan) Characterization of water streams in Bor mining area

4. Students: Dragana Marilović, Milica Bosković, Dusan Mrđenović, Milica Miletić–Svirčev, Takuya Ishiguro, Shigehiro Uchiya, Kanako Koizumi, Chisaki Shimizu, Keisuke Yoshino, Shingo Ishida, Kenta Echigoya, Hitomi Sato, Kosuke Jin; Mentors: Daizo Ishiyama, Grozdanka Bogdanović; (Serbia, Japan) The impact of mining activities on the quality of river in Bor mining area

18:50 – 19:30 – Poster Session

5. PhD Student: Uroš Stamenković; Mentor: Svetlana Ivanov; (Serbia) Microstructures and properties of Sn-Zn low temperature lead-free solder alloys

6. Student: Milica Miletić–Svirčev; Mentor: Milan Radovanović; (Serbia) Electrochemical behavior of stainless steel 316l in the simulater body fluids solutions

16

7. Students: Nevena Munćan, Dragana Marilović; Mentor: Zoran Štirbanović; (Serbia) The possibility of improving the technological process parameters of flotation of copper ore from deposit “Južni revir” of copper mine Majdanpek

8. Student: Fabian Garcia Torres; Mentor: Shehret Tilvaldyev; (Mexico) Electro propulsion or ion propulsion learning project

9. Students: Miloš Trajčević, Jovana Marković; Mentor: Miodrag Žikić; (Serbia) Review of accomplished exploitation capacity of primary loading mechanization at the open pit „Veliki Krivelj“

10. Student: Luis Angel Legarreta Magallanes; (Mexico) Analysis of efficiency of solar cells and batteries for energy storage

11. Student: Gerardo Adrián Muñoz Pérez; (Mexico) Application of ecofriendly and energy saving materials and devices on airport infrastructure

12. Student: Luis Guillermo Alvarado Hernández; (Mexico) Environmental impact generated by the pollution of the commercial airplanes

13. Student: Mariia Parfenova; Mentors: Vera Vorob'eva, Vasily Lutsyk; (Russia) 3d computer model of the Au-Ge-Sn T-x-y diagram for lead-free solders

14. Student: Karla Melissa Hidalgo Martinez; Mentor: Shehret Tilvaldyev; (Mexico) Appearance of dynamic pressure in micro-scale of subsonic airflow around symmetric objects

15. Student: Leili Tilvaldyeva; (Canada ) Glaciers and greenhouse gases

16. Student: Dušan Mrđenović; Mentor: Milan Radovanović; (Serbia) Electrochemical behaviour of titanium and titanium alloys in biological solutions

17. Students: S. Stoykov, D. Stoyanov; Mentors: R. Paunova, D. Grigorova; (Bulgaria) Thermodynamics investigation of reduction of fayalite waste product with calcium carbide

18. Student: D. Stoyanov; Mentor: D. Grigorova, R. Paunova; (Bulgaria) Briquetting of fayalite containing material and calcium carbide mixture

19. Student: Dušan Bogdanović; Mentor: Nenad Milijić; (Serbia) Monitoring the impact of impurities in anode copper in the process of electrolytic refining

20. Students: Milan Stajić, Nikola Jovčić, Miloš Stojanović; Mentor: Igor Svrkota; (Serbia) The influence of underground mining to ground surface

21. Students: Amna Hodžić, Almedina Dedić-Vrbanić, Almedina Podojak; Mentor: Diana Ćubela; (Serbia) A metallographic analysis rh950 condition of 17-7pH steel with modified chemical composition

22. Students: Katarina Stefanovic, Marko Nikolic; Mentor: Jelena Malenovic Nikolic; (Serbia) The impact of mullock and ashes from the mining - energy complexes on the environmental quality

17

23. Student: Kristina Božinović; Mentors: Mirjana Rajčić-Vujasinović, Vesna Grekulović, Milan Gorgievski; (Serbia) Extraction of metal ions using ion exchange resins

24. Student: Srđan Živković; Mentors: Milan Gorgievski, Mirjana Rajčić-Vujasinović, Vesna Grekulović; (Serbia) Utilization of corn stalk as an biosorbent for the adsorption of copper ions from synthetic solutions

25. Student: Bojan Zdravković; Mentors: Vesna Grekulović, Mirjana Rajčić-Vujasinović, Milan Gorgievski; (Serbia) Composite coatings of nickel with the addition of TiO2 particles

26. Students: Amra Neslanović, Ramo Abazović; Mentor: Ana Beroš; (Bosnia and Herzegovina) Effects of bentonite mixture input into a flask per layers of different granulometric sand composition on circular mixture cycles and mould condition

27. Student: Mirjana Nikolić; Mentor: Ivana Marković; (Serbia) Influence of thermomechanical treatment on properties of sintered Cu-Pt alloy

28. Student: Marko Banković; Mentor: Ivana Marković; (Serbia) Influence of deformation degree on properties of PM Cu-2Pt alloy

29. Student: Marijana Mladenović; Mentor: Ivana Marković; (Serbia) Isothermal annealing behavior of cold-deformed copper and copper-platinum alloy