Schneider Air Compressor-Katalog 2011 En
-
Upload
virgil-guiman -
Category
Documents
-
view
96 -
download
27
description
Transcript of Schneider Air Compressor-Katalog 2011 En
40
116
66
00
07
67
Your partner for compressed air systems.
Schneider airsystems – Your partner for compressed air systems.Do you know what it feels like to hold a brand new, dynamic and powerful product in your
hands? A product characterised by an above-average service life that thrills you on account of
its enormous power and robustness?
We can help you experience this feeling.
We offer you a diverse selection of premium products designed for the generation, purification,
distribution and use of compressed air.
Schneider Druckluft GmbHFerdinand-Lassalle-Strasse 43D - 72770 Reutlingen, GermanyTelephone +49 (0)7121 959-0Fax +49 (0)7121 959-151
Member of the group TTS Tooltechnic Systems AG & Co. KGWertstrasse 20D - 73240 Wendlingen a.N.
Your local specialist dealer Call us
+49 (0)7121 959-222 Domestic Sales
+49 (0)7121 959-161 Export Sales
+49 (0)7024 804-20300 Service
Or send a fax to
+49 (0)7121 959-151
E-mail us at
[email protected] our website
www.schneider-airsystems.com
Catalogue 2011
3 year warranty on mobile compressors and compressed air tools.
Valid from April 2011
Sch
nei
der
air
syst
ems
Cat
alo
gu
e 20
11
April
201
1 · I
3000
67
Dear customer, taking a brief look back over the achievements of the past year, we have seen numerous new products such as our series of mobile UniMaster compressors or the new RF 6 XG tyre pressure gauge with many unique selling points setting new standards on the market.
If that wasn’t enough, Schneider airsystems has a host of impressive product, service and performance innovations in store for 2011 – in a premium quality that you have come to expect from Schneider airsystems.
Your special wishes, requests and suggestions for improvement have helped us provide you with a series of innovative new products, outstanding services and customer-friendly warranties. Here is a small taste of what you can expect in our latest catalogue:
Discover new products like the powerful stationary piston compressor with state-of-the-art equipment and vertical or horizontal vessel, or be inspired by the new energy-efficient AirMaster screw compressors with Easy Service Concept for quick and easy maintenance.
Enjoy browsing through the new catalogue!
Your Schneider airsystems team
Powerful products
Innovative services
Customer-friendly warranties
Informative website
Index ...........................................................271-273 Overseas branches ........................................... 274
Compressed air tools ................................172-247Systainers ....................................................176-179
Impact screwdrivers ....................................180-185
Ratchet screwdriver ....................................186-187
Rotary screwdrivers ......................................188-189
Drills .............................................................190-191
Grinding machines ......................................192-194
Saws ................................................................... 195
Special cutter ..................................................... 196
Riveting tongs .................................................... 197
Grease guns ....................................................... 198
Oil extracting device ........................................... 199
Needle descaler ...........................................200-201
Chisel hammers ............................................202-204
Staplers and nail guns .................................205-210
Paint spray guns ..........................................211-219
Plaster sprayers ...........................................220-222
Spray guns ..................................................223-224
Special gun ......................................................... 225
Blasting devices ..........................................226-229
Pressure vessels ...........................................230-233
Cartridge guns ..............................................234-236
Blowing guns ................................................237-241
Tyre inflator ...................................................242-247
Accessories ....................................................... 248
Useful informationCompressed air tools ..................................172-173
The right compressor for your tool? .............174-175
Mobile compressors .....................................18-35UniMaster ........................................................20-26
CompactMaster ...............................................27-30
SilentMaster ....................................................31-33
PetrolMaster ....................................................34-35
Mobile compressed air system MAS ...........36-38
Stationary compressors ................................39-61UniMaster ........................................................41-52
Medic-Air compressors ...................................53-54
AirMaster screw compressors .........................55-61
Accessories for compressed air generation .......................................................62-73
Useful informationScrew or piston compressor? ............................... 39
Assessments and tests
for your compressed air station ............................ 40
Compressed air purification .........................76-96Compressed air cold dryer ..............................80-83
Adsorption dryers .............................................84-85
Condensate dischargers ...................................... 86
Oil-water separators ............................................. 87
Maintenance units and filters ..........................88-95
Useful informationCorrect purification of your compressed air .......... 76
Design data for compressed air dryers
and filters ............................................................... 77
Compressed air quality classes ......................78-79
Pipe systems .................................................98-143Plug-in system 15-28 mm ............................104-112
Pipe boxes ....................................................113-132
Brass pipe system 15-28 mm .....................130-132
Brass pipe system 32-63 mm .....................133-137
Plastic pipe system 32-63 mm ....................138-143
Hoses and workshop equipment .............144-150Hoses ..........................................................145-148
Hose rewinder .............................................148-149
Tractions ............................................................. 149
Supply units/power and air supply units ............ 150
Brass parts/screw fittings ........................151-164Screw fitting, A series ...................................165-167
Fox quick plug-in connections ....................168-170
Useful informationPiping material comparison ................................... 99
Design data for compressed air pipelines ....100-101
Determining the pipeline diameter ...................... 102
Pipe system 15-28 mm ....................................... 103
Appendix 249-274
4 | Using compressed air 171-248
1 | Generating compressed air 17-73
2 | Purifying compressed air 75-95
3 | Distributing compressed air 97-170
3
1 1
1
1
The new energy-efficient AirMaster screw compressors with Easy Service Concept (see page 55 for more details)
The new series of the stationary UniMaster piston compressors – maximum efficiency with individual fittings (see page 41 for more details)
Screw compressors Piston compressors
4
2 3 4
2
3
4
The energy-saving ECO cold dryer with super dry technology and other high-quality products for compressed air purification (see page 80 for more details)
A flexible system of innovative products for compressed air distribution (see page 98 for more details)
The right tool for every application (see page 172 for more details)
Compressed air purification Pipe systems Compressed air tools
5
The brand new AirMaster screw compressors
Highlights of 2011 include brand new screw compressors from performance
categories 4.0, 5.5 and 7.5 kW. Setting new standards on the market as
a result of high demands during the development and implementation of
customer requirements. Our new AirMaster screw compressors are available
as a space-saving individual compressor on a mounted vessel or TÜV-free
tandem vessel. The compressors are also available in complete sets with
a mounted cold dryer.
Your gateway to quick and easy maintenance – for significant cost savings:
The new energy-efficient AirMaster screw compressors with impressive
Easy Service Concept. All technical components are clearly arranged
to allow extremely easy access for maintenance work.
A host of other special technical features contribute to the above-average
service life of the compressor, such as the recently developed clear text
display, which is easy to handle and operate, as well as high-quality
compressor blocks and components.
The sound-insulated housing and optimised air guide guarantee silent
compressor operation and protect your health.
More on page 55
View our products online at www.schneider-airsystems.com
What’s new for 2011
at a glance
66
Seven different variants – The RF 6 and RF 12 tyre pressure gauges
Different models of our best-selling tyre pressure gauge are now available
so every user can find the right solution for the application in hand.
Our 6 and 12 bar versions now include a conventional safety valve clip
with a 1.5 or 2.5 metre hose. We offer both products with a double-sided
valve connector for use in petrol stations and on double tyres.
All variants impress with a fully impact-proof and drive-over-proof
pressure gauge, exact readability and easy, flexible one-hand operation.
Outstanding features that allow you to inflate and deflate tyres quickly as
well as supply exactly the right amount of air.
Regulating tyre pressures in the workshop has never been easier or more convenient.
More on page 242
View our products online at www.schneider-airsystems.com
Powerful stationary UniMaster compressors
The new series of stationary UniMaster compressors offers outstanding power
and the best overall equipment package with top-of-the-line equipment as
standard and the choice of an upright or horizontal vessel. Vertical piston
compressors are also available with a cold dryer mounted on the left or right
for improved accessibility and ease of operation as well as greater flexibility in
the use of your compressor. If you require an additional air supply, we offer
high-quality auxiliary compressors as a low-cost standalone solution. All our
vessels come with a 15 year rust guarantee as standard.
The main highlight is an easy to install, retrofittable sound absorbing cover for
all 4 kW compressors. Compressors can be converted into a silent model in
minutes with minimal work required.
More on page 41
View our products online at www.schneider-airsystems.com
77
Schneider airsystems Germany has launched a new website that raises the
bar with regard to functionality and design. Discover the comprehensive
product information, practical application examples and a personal customer
area on our attractively designed site.
Visit us now at www.schneider-airsystems.de
Discover
our new website
88
Online product catalogueRead all about the benefits of our products in our completely new online product catalogue. You can compare individual products directly with one
another on the clearly laid out pages.
Excellent serviceIn our new service area, you can find information about our unique warranty services. Use our contact form to receive a quick reply to your personal
queries.
Dealer and service partner search engineAre you searching for a dealer or service partner in the vicinity? Our new
search engine is the quick and easy way to find what you’re looking for.
About us – Find out everything about the company!Find out current information about the company, read the latest press releases
and check event and trade fair dates.
Personal customer areaIn the “mySchneider” area, you are always the first to know about
promotional offers, new products and attractive competitions. And of
course you can register for free.
Instruction manuals and EKAT spare parts catalogueAre you searching for spare parts or the right instruction manual for your
compressor? A wide variety of services and information are available at
www.schneider-airsystems.com. Here, you can access our electronic
spare parts catalogue (EKAT) to find the find the spare part you need
quickly and easily. Just look for the article number on the type plate and
type it into the web interface to retrieve an easy-to-understand and detailed
exploded drawing with the associated spare parts list and the recommended
selling prices of the spare parts.
Compressed air from A-ZContains technical terms and explanations relating to compressed air.
Our newsletter You don’t want to miss anything in future? Keep up to date with our free
e-mail newsletter.
The advantages
at a glance
99
1+2 warrantyWith our “1+2 warranty”, we provide a 3-year warranty on mobile compressors
and many compressed air tools if the product is registered online within 30 days of
purchase. For you, this means greater cost effectiveness and more assurance for
your work. For warranty terms and conditions and registration, visit:
www.schneider-airsystems.com/warranty
Warranty extensionWe will gladly extend your warranty to 3 years on all stationary systems when
a maintenance contract is concluded with an authorised Schneider airsystems
service centre.
Spare parts delivery guarantee98% of spare parts are delivered within 24 hours from the warehouse for shorter
downtimes. The latest version of our spare parts catalogue is always available online
at www.schneider-airsystems.com/td.
Supply guaranteeAll spare parts remain in stock and are available for years after the date of purchase.
Spare parts for compressed air tools, mobile piston compressors, accessories and
other devices have guaranteed availability for 7 years.
Alongside this, we are offering you a full 12 year supply guarantee for our stationary
piston and screw compressors, cold and absorption dryers, as well as control systems
and star-delta switches.
Anti-rust guaranteeAll vessels with a burnt-in inner coating come with a 15 year rust guarantee,
which extends far beyond the statutory warranty. All other vessels are covered by
a 10 year warranty.
Return and disposal guarantee You can hand over your old disused compressors to your local service partner, who
will dispose of them at an environmental friendly recycling centre free of charge.
You can count on us –
Guaranteed
1010
Are you considering installing a complete new compressed air solution? Do you wish
to retrofit an existing system? Irrespective of where you require support – we will be
glad to help and offer you personal advice at any time.
We also offer the following services:
Complete on-site repair management: Service technicians complete the job
right in your workshop, particularly practical for stationary systems. In a warranty
case, this is free of charge.
Drop-off repair at service partner or specialised dealer’s facility: You drop off
the machine to the service partner. Once the product is repaired, you are notified
immediately and can pick the machine up straightaway.
Compressor rental service: Our service partners give you the option to rent
compressors so that your business continues to operate smoothly, if necessary.
We are glad to help: Spare parts orders, repairs, service queries, etc.
Telephone: +49 (0)7024 804-20300Fax: +49 (0)7024 804-22269E-mail: [email protected]
Product queries, orders, etc.
Telephone: +49 (0)7121 959-222 Domestic Sales +49 (0)7121 959-161 Export SalesFax: +49 (0)7121 959-151E-mail: [email protected]: www.schneider-airsystems.com
A Schneider airsystems specialist dealer near you can be found easily and
conveniently on our website www.schneider-airsystems.com.
Have any questions?
We also provide comprehensive support for our customers
1111
12
Our maintenance contracts –
Added value for you
We accept service at face value and offer you a maintenance contract specifically for your compressed air system. Allow our
authorised service partner to set up, disassemble and repair your system. We would be glad to answer any questions about
our contract proposal: Tel.: +49 (0)7024 / 804-20300 or via e-mail: [email protected]
1. Extended warrantyFor maintenance contracts concluded as part of a new purchase, the warranty period of the respective system is extended to
3 years.
2. Optimal functionality of the systemThe systems are maintained and checked on a regular basis by professionally trained service technicians. The service techni-
cians can draw on the knowledge base of all corporate divisions of Schneider Druckluft GmbH for all service requirements.
3. Operating safetyDowntimes are reduced considerably as trained specialist personnel check and maintain all components and wear parts of
the system on a regular basis for the entire period of the agreement.
4. Professional maintenanceMaintenance work and functional checks are performed using original Schneider Druckluft spare parts by trained service
technicians.
5. Reduction in operating costsEarly detection of wear and technical defects prevents repairs subject to a fee as well as unavoidable downtimes and
guarantees the long-term maintenance value of the system.
6. Costs can be planned to sizeWork time + travel costs are calculated according to agreed flat rates. The calculation of material costs is based on the
actual cost.
7. System optimisationConstant optimisation of the compressed air system through regular competent assessment by our service technicians as part
of the maintenance work increases the efficiency of your system.
8. Reduced administrationThe service partner coordinates and monitors all measures and deadlines required for maintenance and service. The
maintenance and support services offered by our service technicians are automatically guaranteed at fixed intervals.
9. Minimal travel costsThrough the long-term planning of maintenance work, savings can be made in the area of travel costs as rally trips are avoided
and round trips can be sensibly planned. This has a positive impact on flat-rate maintenance fees.
1313
1
2
4
3
Do you know what it feels like to hold a brand new, dynamic and powerful product in your
hands? A product characterised by an above-average service life that thrills you on account of
its enormous power and robustness?
We can help you experience this feeling.
Products from our compressed air generation, purifi cation, distribution and utilisation ranges are
characterised by outstanding quality and impressive power.
We are fully aware of these properties and therefore recommend combining the system power
supply of the four product areas – for effi cient working and perfect results.
Purifying compressed air
Distributing compressed air
Using compressed air
Generating compressed air
14
Consistent top quality
Our claim is that we always deliver top quality products to continuously
improve ourselves and satisfy our customers. All Schneider airsystems
products are therefore subject to stringent quality requirements and regular
inspections.
The certification of our company according to DIN EN ISO 9001 covers all
areas – from development and production to marketing, sales and service –
and underscores this very high standard. We not only focus on our own
design and development and our own testing laboratory, but also on
in-house production and assembly at our headquarters in Wendlingen
(Baden-Württemberg). To have these processes on your own premises also
means that you have complete control of all activities related to added value
and quality.
Quality assurance
However, we do not stop there. Our quality management system continuously
monitors and safeguards the high standard of quality, e.g. with 100 %
testing. If a machine fails in operation despite this, we analyse the failure and
use it as a tool to further improve our products. In the event of complaints,
we guarantee a response time of no more than 5 working days offering fast
assistance without bureaucracy to get you back up and running quickly.
If you have suggestions or concrete questions about quality assurance, just
e-mail us at:
Quality is our
top priority
1515
MEHRWERT
BENEFIT
WARTOŚĆ D
OD
AN
A VALO
R A
ÑAD
IDO
VARIO SPEED
Quiet 1+2 warranty EXTRA product
15 year rust guarantee
10 year rust guarantee
No technical inspection required
Delivered in a caseDelivered in a Systainer
Safety quick-release coupling
With integral electronic elements
With integral electronic elements
Rubber hand grip (soft grip)
7 year spare parts warranty
12 year spare parts warranty
Unoiled compressed air
“Click it” plug-in pipeline system
Oiled compressed air
Oil regularly
An overview of
our pictograms
1616
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
Generating compressed
air
Mobile compressors | 18
Stationary piston compressors | 41
Stationary screw compressors | 55
Accessories | 62
01
With especially quiet noise
insulation, this portable/
mobile compressor series is
ideal for applications where
silence is required – such as
directly at the workplace.
All models are equipped with
technically advanced com-
ponents and also available in
an oil-free version.
SilentMasterThe silent type
The UniMaster compressors are
available in five performance
classes between 1.1 kW and
4.0 kW as well as in a standard-
and EXTRA variant.
The simple handling and high
degree of flexibility of the
UniMaster compressors is
impressive.
With a comprehensive range of
equipment and outstanding
operating comfort, the EXTRA
versions scores highly on
several fronts.
UniMasterAll-round geniuses
The robust, compact and
lightweight construction of the
CompactMaster compressor
is perfect for construction
sites and interior fitting: proven
in practice, they are also
available in an oil-free version.
CompactMasterIdeal companions for the construction site
Mobile compressors
18
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
Manufactured with the
highest quality craftsmanship,
this compressor series works
independently of the mains
power supply – and provides
a reliable supply of power for
work up to 15 bar. Idling and
speed control enable duty
cycles of 100%.
PetrolMasterIndependent from the power supply
The MAS mobile compressed air system
combines all the power of a stationary
unit with the advantages of a mobile
compressor and keeps noise levels
to a minimum. The system ensures
comfortable working conditions and
maximum flexibility – both in mobile
and stationary applications.
MASThe mobile compressed air system
19
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
The main characteristics of mobile UniMaster compressors are simple handling and a
high degree of flexibility. The impressive EXTRA version incorporates a comprehensive
range of equipment and guarantees maximum operating comfort.
UniMasterFlexible and user-friendly
for universal use
20
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
MEHRWERT
BENEFIT
WARTOŚĆ D
OD
AN
A VALO
R A
ÑAD
IDO
Extra long handlefor simple, convenient transport
User-friendly operating panelfor easy reading of the pressure gauges and protection of sensitive parts
High operating comfortdue to condensate drainage at operation level
Mobile usethanks to front guide rolls
15 year rust warranty on the vessel
Easy to manoeuvreand resistant to breaking due to stable soft rubber wheels
Flexible operationthrough separate compressed outlets for unoiled and oiled compressed air, equipped with safety quick-release coupling
using the UNM 410-10-50 WX as an example
EXTRA equipment
Our EXTRA UniMaster compressors are characterised by comprehensive equipment
and a high degree of operating comfort – for easier handling, excellent working results
and your complete satisfaction.
All EXTRA products are identified at a glance by the EXTRA symbol.
In the fast lane –
the EXTRA compressors
21
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
UniMaster Compressors for universal use
Common features Movable piston compressor with horizontal vessel
Standard features include: all safety fittings and electric connection
cable with plug and Condor pressure switch
Compressed air vessel equipped with safety valve, vessel pressure
gauge and condensate outlet valve
The welded-on rear handle facilitates loading and transport
Fully automatic operation due to pressure switch with start-up relief,
motor protection and ON/OFF switch
UNM 210-8-25 W Handy starter compressors
With upgraded equipment for universal use
Directly-flanged 1-cylinder unit and 230-V alternating current motor with integrated motor
protection
Including pressure reducer for optimum control of the working pressure
In addition, with 2 m equipment line with rubber sheathing and air outlet via quick-release
coupling
10-year rust guarantee on all vessels
UNM 210-8-25 WXOF With EXTRA equipment for universal use
Directly-flanged, oil-free 1-cylinder unit and 230-V alternating current motor with integrated motor
protection
Savings on time and cost through less maintenance work due to oil-free operation
Filter pressure reducer for regulated compressed air and compressed air free of condensate,
dirt and oil
In addition, with 2 m equipment line with rubber sheathing and air outlet via quick-release
coupling
Extra long lifetime thanks to new high-performance reeling pistons
10-year rust guarantee on all vessels
UNM 260-10-50 W With upgraded equipment for universal use
Directly-flanged 1-cylinder unit and 230-V alternating current motor with integrated motor
protection
Filter pressure reducer for regulated compressed air and compressed air free of condensate,
dirt and oil
In addition, with 2 m equipment line with rubber sheathing and air outlet via quick-release
coupling
10-year rust guarantee on all vessels
UNM 260-10-50 WX With EXTRA equipment for universal use
Directly-flanged 1-cylinder unit and 230-V alternating current motor with integrated motor
protection
Filter pressure reducer for regulated compressed air and compressed air free of condensate,
dirt and oil
In addition, with 4 m equipment line with rubber sheathing and air outlet via 2 quick-release
couplings
The front guide rolls and the longer handle increase mobility
Vessel with composite inner coating (zinc-phosphate and plastic)
15-year rust guarantee on all vessels
Compressors, mobile
22
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
UNM 410-10-50 W With upgraded equipment for universal use
With V-belt drive, 2 cylinders with in-line configuration for particularly smooth running and
230-V alternating current motor with external motor protection
Low compressor speed, which is gentle on the compressor components and also reduces the
noise level and vibrations
Large ventilator flywheel for optimal cooling
Filter pressure reducer for regulated compressed air and compressed air free of condensate,
dirt and oil
In addition, with 2 m equipment line with rubber sheathing and air outlet via quick-release
coupling
10-year rust guarantee on all vessels
UNM 410-10-50 WX With EXTRA equipment for universal use
Condensate drainage at operating height
With V-belt drive, 2 cylinders with in-line configuration for particularly smooth running and
230-V alternating current motor with external motor protection
Low compressor speed, which is gentle on the compressor components and also reduces the
noise level and vibrations
Fitting unit with filter pressure reducer for regulated compressed air and compressed air free
of condensate, dirt and oil, and a mist oiler for oiled compressed air
Optimised operating panel with user-friendly reading of the pressure gauge and protection for
sensitive parts
In addition, with 4 m equipment line with rubber sheathing and air outlet via 2 safety quick-release
couplings
The front guide rolls and the longer handle increase mobility
The rear wheels are made of soft rubber. This combines the breakdown safety of a synthetic
wheel with the driving comfort of inflated tyres
Large ventilator flywheel for optimal cooling
Vessel with composite inner coating (zinc-phosphate and plastic)
15-year rust guarantee on all vessels
UNM 410-10-50 D With upgraded equipment for universal use
With V-belt drive, 2-stage compressing unit with V-belt drive, 2 cylinders with in-line configuration
and 400-V three-phase current motor with external motor protection
Low compressor speed, which is gentle on the compressor components and also reduces the
noise level and vibrations
Large ventilator flywheel for optimal cooling
Filter pressure reducer for regulated compressed air and compressed air free of condensate,
dirt and oil
In addition, with 2 m equipment line with rubber sheathing and air outlet via quick-release
coupling
10-year rust guarantee on all vessels
Compressors, mobile
23
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
UNM 410-10-50 DX With EXTRA equipment for universal use
Condensate drainage at operating height
With V-belt drive, 2-stage compressing unit with V-belt drive, 2 cylinders with in-line configuration
and 400-V three-phase current motor with external motor protection
Low compressor speed, which is gentle on the compressor components and also reduces the
noise level and vibrations
Fitting unit with filter pressure reducer for regulated compressed air and compressed air free of
condensate, dirt and oil, and a mist oiler for oiled compressed air
Optimised operating panel with user-friendly reading of the pressure gauge and protection for
sensitive parts
In addition, with 4 m equipment line with rubber sheathing and air outlet via 2 safety quick-release
couplings
The front guide rolls and the longer handle increase mobility
The rear wheels are made of soft rubber. This combines the breakdown safety of a synthetic
wheel with the driving comfort of inflated tyres
Large ventilator flywheel for optimal cooling
Vessel with composite inner coating (zinc-phosphate and plastic)
15-year rust guarantee on all vessels
UNM 510-10-90 D With upgraded equipment for universal use
With V-belt drive, 2 cylinders with in-line configuration for particularly smooth running and
400-V three-phase current motor with external motor protection
Low compressor speed, which is gentle on the compressor components and also reduces the
noise level and vibrations
Large ventilator flywheel for optimal cooling
Filter pressure reducer for regulated compressed air and compressed air free of condensate,
dirt and oil
In addition, with 2 m equipment line with rubber sheathing and air outlet via quick-release
coupling
Equipment line with phase alternator
10-year rust guarantee on all vessels
UNM 510-10-90 DX With EXTRA equipment for universal use
Condensate drainage at operating height
With V-belt drive, 2 cylinders with in-line configuration for particularly smooth running and
400-V three-phase current motor with external motor protection
Low compressor speed, which is gentle on the compressor components and also reduces the
noise level and vibrations
Fitting unit with filter pressure reducer for regulated compressed air and compressed air free of
condensate, dirt and oil, and a mist oiler for oiled compressed air
Optimised operating panel with user-friendly reading of the pressure gauge and protection for
sensitive parts
In addition, with 4 m equipment line with rubber sheathing and air outlet via 2 safety quick-release
couplings
Equipment line with phase alternator
The front guide rolls and the longer handle increase mobility
The rear wheels are made of soft rubber. This combines the breakdown safety of a synthetic
wheel with the driving comfort of inflated tyres
Large ventilator flywheel for optimal cooling
Vessel with composite inner coating (zinc-phosphate and plastic)
15-year rust guarantee on all vessels
Compressors, mobile
24
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
UNM 660-10-90 D With upgraded equipment for universal use
With V-belt drive, 2-stage compressing unit with V-belt drive, 2 cylinders with in-line configuration
and 400-V three-phase current motor with external motor protection
Low compressor speed, which is gentle on the compressor components and also reduces the
noise level and vibrations
Large ventilator flywheel for optimal cooling
Filter pressure reducer for regulated compressed air and compressed air free of condensate,
dirt and oil
In addition, with 2 m equipment line with rubber sheathing and air outlet via quick-release
coupling
Equipment line with phase alternator
10-year rust guarantee on all vessels
UNM 660-10-90 DX With EXTRA equipment for universal use
Condensate drainage at operating height
With V-belt drive, 2-stage compressing unit with V-belt drive, 2 cylinders with in-line configuration
and 400-V three-phase current motor with external motor protection
Low compressor speed, which is gentle on the compressor components and also reduces the
noise level and vibrations
Fitting unit with filter pressure reducer for regulated compressed air and compressed air free of
condensate, dirt and oil
Optimised operating panel with user-friendly reading of the pressure gauge and protection for
sensitive parts
In addition, with 4 m equipment line with rubber sheathing and air outlet via 2 safety quick-release
couplings
Equipment line with phase alternator
The front guide rolls and the longer handle increase mobility
The rear wheels are made of soft rubber. This combines the breakdown safety of a synthetic
wheel with the driving comfort of inflated tyres
Large ventilator flywheel for optimal cooling
Vessel with composite inner coating (zinc-phosphate and plastic)
15-year rust guarantee on all vessels
UNM 580-15-90 D With upgraded equipment for universal use
With V-belt drive, 2-stage compressing unit with V-belt drive, 2 cylinders with in-line configuration
and 400-V three-phase current motor with external motor protection
Low compressor speed, which is gentle on the compressor components and also reduces the
noise level and vibrations
Large ventilator flywheel for optimal cooling
Filter pressure reducer for regulated compressed air and compressed air free of condensate,
dirt and oil
In addition, with 2 m equipment line with rubber sheathing and air outlet via quick-release
coupling
Equipment line with phase alternator
10-year rust guarantee on all vessels
Compressors, mobile
25
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
UNM 580-15-90 DX With EXTRA equipment for universal use
Condensate drainage at operating height
With V-belt drive, 2-stage compressing unit with V-belt drive, 2 cylinders with in-line configuration
and 400-V three-phase current motor with external motor protection
Low compressor speed, which is gentle on the compressor components and also reduces the
noise level and vibrations
Fitting unit with filter pressure reducer for regulated compressed air and compressed air free of
condensate, dirt and oil
Optimised operating panel with user-friendly reading of the pressure gauge and protection for
sensitive parts
In addition, with 4 m equipment line with rubber sheathing and air outlet via 2 safety quick-release
couplings
Equipment line with phase alternator
The front guide rolls and the longer handle increase mobility
The rear wheels are made of soft rubber. This combines the breakdown safety of a synthetic
wheel with the driving comfort of inflated tyres
Large ventilator flywheel for optimal cooling
Vessel with composite inner coating (zinc-phosphate and plastic)
15-year rust guarantee on all vessels
Type Art. no.
Pre
ssu
re(b
ar)
Su
ctio
n
cap
aci
ty(l
/min
)
Fillin
g
cap
aci
ty(l
/min
)
Dri
ve p
ow
er(k
W)
Volt
ag
e(V
)
Sp
eed
(min
-1)
Tan
k v
ol.
(l)
Wei
gh
t(k
g)
Nois
e(d
B(A
))1)
Dim
ensi
on
s (W
x D
x H
)
UNM 210-8-25 W A711000 8 200 110 1,1 230 2850 24 25 95 655x365x595
UNM 210-8-25 WXOF A711001 8 210 120 1,1 230 2850 24 24 95 655x365x635
UNM 260-10-50 W A712000 10 260 160 1,5 230 2850 50 32 95 770x425x640
UNM 260-10-50 WX A712001 10 260 160 1,5 230 2850 50 33 95 770x425x640
UNM 410-10-50 W A713000 10 410 295 2,2 230 1210 50 64 96 820x410x810
UNM 410-10-50 WX A713001 10 410 295 2,2 230 1210 50 68 96 885x410x870
UNM 410-10-50 D A713010 10 410 295 2,2 400 1210 50 62 96 820x410x810
UNM 410-10-50 DX A713011 10 410 295 2,2 400 1210 50 67 96 885x410x870
UNM 510-10-90 D A714000 10 510 390 3,0 400 1240 90 80 97 1070x495x895
UNM 510-10-90 DX A714001 10 510 390 3,0 400 1240 90 84 97 1100x505x935
UNM 660-10-90 D A715000 10 660 520 4,0 400 1000 90 102 97 1070x495x1000
UNM 660-10-90 DX A715001 10 660 520 4,0 400 1000 90 106 97 1100x505x1000
UNM 580-15-90 D A715100 15 580 470 4,0 400 915 90 111 94 1070x495x1000
UNM 580-15-90 DX A715101 15 580 470 4,0 400 915 90 116 95 1100x505x1000
1) Sound power level according to DIN EN ISO 3744 (RL 2000/14/EC)
Compressors, mobile
26
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
The robust, compact and lightweight construction of the CompactMaster
compressor is perfect for construction sites and interior fitting:
available as a portable or mobile version with height-adjustable handle
depending on requirements.
CompactMasterLight and handy –
ideal for the construction site
27
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
CompactMaster Compressors for special requirements – Lightweight and compact
Common features Mobile piston compressor
Fully automatic operation due to pressure switch with start-up relief,
motor protection and ON/OFF switch
Compressed air vessel equipped with safety valve, vessel pressure
gauge and condensate outlet valve
Applications: suitable for mobile use on building sites and for interior
fitting
Standard features include: all safety fittings and electric connection
cable with plug and Condor pressure switch
Air outlets with quick release coupling for easy connection of
compressed air devices
All fragile parts, such as pressure switches, pressure gauges, fittings,
etc. are well protected
CPM 300-10-20 W Portable and mobile
1 cylinder
Directly-flanged power unit
Outstanding transportation characteristics due to height-adjustable bracket with special clamping
mechanism for ease of use
Can be transported vertically and horizontally
Easy transportation up stairs due to large, perfectly positioned wheels
User-friendly fittings unit with all-round protection
Fitting unit with filter pressure reducer for regulated compressed air and compressed air free of
condensate, dirt and oil, and a mist oiler for oiled compressed air
High flexibility thanks to a 4 m long equipment line with rubber sheathing
Cable rewinder ensures unobstructed freedom of movement
Two pressure gauges for vessel pressure and working pressure
Vessel with composite inner coating (zinc-phosphate and plastic)
15-year rust guarantee on all vessels
CPM 342-10-20 W Portable and mobile
1 cylinder
Directly-flanged power unit
The low speed of rotation reduces vibrations, preserves the compressor components and reduces
noise levels
Good start-up characteristics
Outstanding transportation characteristics due to height-adjustable bracket with special clamping
mechanism for ease of use
Can be transported vertically and horizontally
Easy transportation up stairs due to large, perfectly positioned wheels
User-friendly fittings unit with all-round protection
Fitting unit with filter pressure reducer for regulated compressed air and compressed air free of
condensate, dirt and oil, and a mist oiler for oiled compressed air
High flexibility thanks to a 4 m long equipment line with rubber sheathing
Cable rewinder ensures unobstructed freedom of movement
Two pressure gauges for vessel pressure and working pressure
Vessel with composite inner coating (zinc-phosphate and plastic)
15-year rust guarantee on all vessels
CPM 160-8-2 W-oilfree Portable, extremely handy and lightweight
1 cylinder
Directly-flanged power unit
Oil-free operation saves on maintenance. No oil changes, no oil in the condensate
Pressure reducer for setting the working pressure
10-year rust guarantee on all vessels
Compressors, mobile
28
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
CPM 160-8-6 W-oilfree Portable, extremely handy and lightweight
1 cylinder
Directly-flanged power unit
Oil-free operation saves on maintenance. No oil changes, no oil in the condensate
Pressure reducer for setting the working pressure
Solid frame with 6 l vessel
10-year rust guarantee on all vessels
CPM 212-10-2 W Portable
1 cylinder
Directly-flanged power unit
Filter pressure reducer for regulated compressed air and compressed air free of condensate,
dirt and oil
The surrounding frame is used both as a vessel and a guard for all sensitive parts
10-year rust guarantee on all vessels
CPM 200-8-12 W-oilfree Portable
1 cylinder
Directly-flanged power unit
Can be transported vertically and horizontally
Service life up to ten times longer than traditional oil-free compressors due to the high quality,
wear-resistant materials used
Oil-free operation saves on maintenance. No oil changes, no oil in the condensate
Inflation performance improved by up to 32% due to high-performance reeling pistons
Filter pressure reducer for regulated compressed air and compressed air free of condensate,
dirt and oil
Vessel with composite inner coating (zinc-phosphate and plastic)
15-year rust guarantee on all vessels
CPM 250-10-12 W Portable and mobile
1 cylinder
Directly-flanged power unit
Can be transported vertically and horizontally
Fitting unit with filter pressure reducer for regulated compressed air and compressed air free of
condensate, dirt and oil, and a mist oiler for oiled compressed air
Guard with non-slip protection
Vessel with composite inner coating (zinc-phosphate and plastic)
15-year rust guarantee on all vessels
CPM 320-10-18 W Mobile
2 cylinders, V layout
Directly-flanged power unit
Vessel with zinc-phosphate and plastic coating
Fitting unit with filter pressure reducer for regulated compressed air and compressed air free of
condensate, dirt and oil, and a mist oiler for oiled compressed air
The low speed of rotation reduces vibrations, preserves the compressor components and reduces
noise levels
Stable steel frame with cover plate
10-year rust guarantee on all vessels
Compressors, mobile
29
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
CPM 400-10-20 W Mobile
2 cylinders, V layout
Vessel with zinc-phosphate and plastic coating
Directly-flanged power unit
The low speed of rotation reduces vibrations, preserves the compressor components and reduces
noise levels
User-friendly fittings unit with all-round protection
Fitting unit with filter pressure reducer for regulated compressed air and compressed air free of
condensate, dirt and oil, and a mist oiler for oiled compressed air
Sturdy steel frame with cover plate and extendable handle
10-year rust guarantee on all vessels
CPM 560-10-20 D Mobile
2 cylinders, V layout
Vessel with zinc-phosphate and plastic coating
Directly-flanged power unit
The low speed of rotation reduces vibrations, preserves the compressor components and reduces
noise levels
User-friendly fittings unit with all-round protection
Fitting unit with filter pressure reducer for regulated compressed air and compressed air free of
condensate, dirt and oil, and a mist oiler for oiled compressed air
Sturdy steel frame with cover plate and extendable handle
10-year rust guarantee on all vessels
400 V: Cekon connector with phase alternator
ZPM 97-15-2 W Portable
Pressure up to 15 bar
1 cylinder
Directly-flanged power unit
Standard features include: all safety fittings and electric connection cable with plug
The low speed of rotation reduces vibrations, preserves the compressor components and reduces
noise levels
One additional air outlet with quick release coupling for maximum pressure
Fitting unit with filter pressure reducer for regulated compressed air and compressed air free of
condensate, dirt and oil
The surrounding frame is used both as a vessel and a guard for all sensitive parts
10-year rust guarantee on all vessels
Type Art. no.
Pre
ssu
re(b
ar)
Su
ctio
n
cap
aci
ty(l
/min
)
Fillin
g
cap
aci
ty(l
/min
)
Dri
ve p
ow
er(k
W)
Volt
ag
e(V
)
Sp
eed
(min
-1)
Tan
k v
ol.
(l)
Wei
gh
t(k
g)
Nois
e(d
B(A
))1)
Dim
ensi
on
s (W
x D
x H
)
CPM 300-10-20 W A222012 10 300 195 2,0 230 2850 20 37,0 97 490x490x830
CPM 342-10-20 W A222011 10 340 265 2,2 230 1465 20 49,0 95 490x490x830
CPM 160-8-2 W-oilfree A222002 8 160 70 1,1 230 2850 2 11,0 94 330x250x420
CPM 160-8-6 W-oilfree A222010 8 160 70 1,1 230 2850 6 13,0 94 340x280x510
CPM 212-10-2 W A222003 10 200 125 1,1 230 2850 2,4 18,5 93 530x300x400
CPM 200-8-12 W-oilfree A222007 8 200 110 1,1 230 2800 12 21,0 94 430x350x660
CPM 250-10-12 W A222006 10 240 155 1,5 230 2850 12 26,0 97 430x350x660
CPM 320-10-18 W A222001 10 310 240 1,9 230 1420 18 48,0 92 610x610x530
CPM 400-10-20 W A222009 10 390 300 2,2 230 1430 20 77,0 91 800x670x640
CPM 560-10-20 D A222008 10 560 450 3,0 400 1440 20 74,0 95 800x670x640
ZPM 97-15-2 W A555004 15 97 55 0,55 230 1420 2,4 21 87 530x300x430
1) Sound power level according to DIN EN ISO 3744 (RL 2000/14/EC)
Compressors, mobile
30
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
The SilentMaster models have special noise insulation and are especially quiet.
This portable/mobile compressor series is therefore ideal for applications where
silence is required – such as directly at the workplace.
SilentMasterWhen quiet operation
is required
31
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
SilentMaster Compressors for special requirements – Quiet due to special sound insulation
Common features Mobile piston compressor
Directly-flanged power unit
1 cylinder
Standard features include: all safety fittings and electric connection
cable with plug
Compressed air vessel equipped with safety valve, vessel pressure
gauge and condensate outlet valve
Quiet due to special sound insulation
SEM 30-8-4 W Portable
Fully automatic operation via pressure switch
Air outlet with quick release coupling for easy connection of compressed air devices
Fitting unit with filter pressure reducer for regulated compressed air and compressed air free of
condensate, dirt and oil
Pressure gauge for working pressure
Virtually silent operation. Specially designed to be used directly at the workplace
Suitable for airbrush work
10-year rust guarantee on all vessels
SEM 50-8-9 W Portable
Fully automatic operation via pressure switch
Air outlet with quick release coupling for easy connection of compressed air devices
Fitting unit with filter pressure reducer for regulated compressed air and compressed air free of
condensate, dirt and oil
Pressure gauge for working pressure
Virtually silent operation. Specially designed to be used directly at the workplace
Suitable for airbrush work
Pressure switch for start-up relief
With special head for lower operating temperatures and therefore particularly small amounts of
residual oil in the compressed air
10-year rust guarantee on all vessels
SEM 100-8-6 W-oilfree Portable
Fully automatic operation with pressure switch and relief valve
Pressure reducer for setting the working pressure
Quiet due to special casing on the power unit
The low speed of rotation reduces vibrations, preserves the compressor components and reduces
noise levels
Extremely long service life compared to traditional oil-free compressors due to the high quality,
wear-resistant materials used
Inflation performance improved by up to 32% due to high-performance reeling pistons
Oil-free operation saves on maintenance. No oil changes, no oil in the condensate
Air outlet with quick release coupling for easy connection of compressed air devices
10-year rust guarantee on all vessels
SEM 200-8-6 W-oilfree Portable and mobile
Compact, flat design – requires little space
Fully automatic operation with pressure switch and relief valve
Pressure reducer for setting the working pressure
Integrated accessory compartment with spiral hose 8 x 1 mm, length 4 m and blowing gun
Quiet due to special casing on the power unit
Extremely long service life compared to traditional oil-free compressors due to the high quality,
wear-resistant materials used
Inflation performance improved by up to 32% due to high-performance reeling pistons
Oil-free operation saves on maintenance. No oil changes, no oil in the condensate
Air outlet with quick release coupling for easy connection of compressed air devices
10-year rust guarantee on all vessels
Compressors, mobile
32
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
SEM 255-10-50 W Mobile
Fully automatic operation due to pressure switch with start-up relief, motor protection and
ON/OFF switch
Large compressed air aftercooler for reduced moisture in the compressed air
Air outlets with quick safety coupling for simple connection and safe disconnection of
compressed air tools
Sound-insulated power unit
Two pressure gauges for vessel pressure and working pressure
Fitting unit with filter pressure reducer for regulated compressed air and compressed air free of
condensate, dirt and oil
10-year rust guarantee on all vessels
SEM 320-10-60 W Vibration-free operation and extended service life due to low rotation speed
Large ventilator flywheel for optimal cooling
Large compressed air aftercooler for reduced moisture in the compressed air
Fully automatic operation with special start-up relief, motor protection and ON/OFF switch
Fitting unit with filter pressure reducer for regulated compressed air and compressed air free of
condensate, dirt and oil, and a mist oiler for oiled compressed air
Air outlets with quick safety coupling for simple connection and safe disconnection of
compressed air tools
Two pressure gauges for vessel pressure and working pressure
Soundproofed power unit with integrated electric extractor fan
2 cylinders, V layout
Vessel with composite inner coating (zinc-phosphate and plastic)
15-year rust guarantee on all vessels
Type Art. no.
Pre
ssu
re(b
ar)
Su
ctio
n
cap
aci
ty(l
/min
)
Fillin
g
cap
aci
ty(l
/min
)
Dri
ve p
ow
er(k
W)
Volt
ag
e(V
)
Sp
eed
(min
-1)
Tan
k v
ol.
(l)
Wei
gh
t(k
g)
Nois
e(d
B(A
))1)
Dim
ensi
on
s (W
x D
x H
)
SEM 30-8-4 W A333005 8 30 19 0,2 230 2900 4 19 311) 410x190x435
SEM 50-8-9 W A333004 8 50 36 0,34 230 2900 9 22 331) 360x360x480
SEM 100-8-6 W-oilfree A333002 8 95 50 0,55 230 1420 6 14 872) 380x210x430
SEM 200-8-6 W-oilfree A333003 8 200 110 1,1 230 2850 6 19 892) 460x220x650
SEM 255-10-50 W A333001 10 255 165 1,5 230 2850 50 56 872) 1000x390x770
SEM 320-10-60 W A333006 10 310 240 1,9 230 1410 60 90 852) 970x480x770
1) Sound pressure level at distance of 4 m according to 79/113 EEC, L(PA4) 2) Sound power level according to DIN EN ISO 3744 (RL 2000/14/EC)
Compressors, mobile
33
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
Manufactured with the highest quality craftsmanship, this compressor series works
independently of the mains power supply – and provides a reliable supply of power
for work up to 15 bar. Idling and speed control enable duty cycles of 100%.
PetrolMasterMobile and independent
from the mains power supply
34
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
PetrolMaster Compressors for special requirements – Independent from the mains power supply due to petrol drive
Common features Mobile piston compressor
Independent from the mains power supply due to petrol drive
Equipped with all the necessary safety fittings
Compressed air vessel equipped with safety valve, vessel pressure
gauge and condensate outlet valve
Fitting unit with filter pressure reducer for regulated compressed air
and compressed air free of condensate, dirt and oil, and a mist oiler
for oiled compressed air
Air outlets with quick release coupling for easy connection of
compressed air devices
Operation in closed rooms not permitted
PEM 240-10-10 B Suitable for use on building sites
Portable and mobile
1 cylinder
Directly-flanged power unit
Idling control
10-year rust guarantee on all vessels
PEM 500-15-50 B Mobile
2 cylinders, layout designed for particularly quiet operation
Two-stage compressing power unit for pressures up to 15 bar
Idling and speed regulation
V-belt drive
Low speed of rotation
Large ventilator flywheel for optimal cooling
Large compressed air aftercooler for reduced moisture in the compressed air
Vessel with composite inner coating (zinc-phosphate and plastic)
15-year rust guarantee on all vessels
Type Art. no.
Pre
ssu
re(b
ar)
Su
ctio
n
cap
aci
ty(l
/min
)
Fillin
g
cap
aci
ty(l
/min
)
Dri
ve p
ow
er(k
W)
Sp
eed
(min
-1)
Tan
k v
ol.
(l)
Wei
gh
t(k
g)
Nois
e(d
B(A
))1)
Oil q
ua
nti
ty(l
)
Dim
ensi
on
s (W
x D
x H
)
PEM 240-10-10 B A444001 10 230 140 3,0 3400 10 31 97 0,6 450x520x730
PEM 500-15-50 B A444002 15 500 400 6,6 1140 50 114 97 1,1 1060x490x960
1) Sound power level according to DIN EN ISO 3744 (RL 2000/14/EC)
Compressors, mobile
35
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
The MAS mobile compressed air system combines all the power of a stationary unit with the
advantages of a mobile compressor and keeps noise levels to a minimum. The system
ensures comfortable working conditions and maximum flexibility – both in practical
mobile and stationary applications.
Mobile Compressed Air System The MAS mobile compressed air system
for professional businesses
36
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
Mobile compressed air system MASCommon features Mobile compressed air system for profes-
sional businesses
Piston compressor with proven V-belt drive
and vertical vessel
Motor with 2 cylinders, layout designed for
particularly quiet operation
4 KW version with two-stage compressing
power unit
The low speed of rotation and spring-
mounted power unit reduce vibrations and
preserve the compressor components
Additional compressed air aftercooler for
reduced moisture in the compressed air
Large ventilator for optimal cooling
Standard features include: all safety fittings
and electric connection cable with Cekon
connector and phase inverter
Fully automatic operation due to pressure
switch with start-up relief, motor protection
and ON/OFF switch
15-year rust guarantee on the vessel. Inner
coating provides effective protection
Frame with 2 large wheels and 2 guide rollers
with parking brakes
Standard features include water separator
with filter (with float valve for automatic
condensate drainage), mist oiler, 2 pressure
gauges for vessel and working pressure,
2 safety quick-action couplings ½˝, operating
hour meter, 2 x 230 V power outlets, 2 cables
(230 and 400 V) each 5 m in length
All tools and materials are stored in the direct
vicinity of the work place close at hand.
No more time wasted searching for what
you need
Operating elements are all within easy reach
and display elements are easy to read, largely
excluding the possibility of operational errors
Users can arrange and extend the machine
according to the layout of their work place
and their personal requirements
Operating the compressed air system in the
workshop is a viable option because of the
low level of noise generated. No additional
soundproofing measures required
Automatic Condensate Extractor (ACE):
Time-consuming condensate drainage is no
longer required due to the automatic conden-
sate drain. Full vessel capacity available at
all times. The automatic evaporator saves on
disposal costs
Silent versions with automatic belt tensioning
function require minimal maintenance
Type Art. no.
Pre
ssu
re(b
ar)
Su
ctio
n
cap
aci
ty(l
/min
)
Fillin
g
cap
aci
ty(l
/min
)
Dri
ve p
ow
er(k
W)
Volt
ag
e(V
)
Sp
eed
(min
-1)
Tan
k v
ol.
(l)
Wei
gh
t(k
g)
Nois
e(d
B(A
))
Dim
ensi
on
s (W
x D
x H
)MAS 650-10-90 D A888008 10 650 520 4,0 400 950 90 175 75 730x935x1260
MAS 575-15-60 D A888009 15 575 460 4,0 400 850 60 172 75 730x935x1260
MAS 650-10-90 D-Silent A888010 10 650 520 4,0 400 950 90 183 69 730x935x1260
Compressors, mobile
37
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
MAS modules Accessories modules for mobile compressed air system MAS
MAS-Panel Perforated rear wall panel for maximum organisation at the work place
With fastening hooks
Time savings, everything is close at hand
Height 350 mm
With mounting hardware
MAS-Store Tool holder with storage space for compressed air tools, accessories and consumable material
for maximum organisation at the work place
Time savings, everything is close at hand
With 3 quick-release couplings and 4 partitions
MAS-Tank Easy to install auxiliary vessel, can be retrofitted if compressed air requirements change
Machines fitted with an additional vessel are exempt from compressed air inspections.
The type test specified in the Ordinance on Industrial Safety and Health § 17 AN stipulates that
an inspection by a qualified person (technical expert) is sufficient
Vessel with inner coating for a long service life
15-year rust guarantee on all vessels
With safety valve and pressure gauge as standard
Including connection material
Volume 60 l
Dimensions (W x D x H): 385 x 410 x 1000 mm
Weight 20 kg
11 bar
MAS-Dryer Compressed air conditioned in line with the application, even on mobile units
Easy to install cold dryer as an immediate expansion level or retrofit for a higher degree
of air quality
Volume flow (at pressure dew point +3°C) 400 l/min
Power input 0.27 kW
Including connection material
Dimensions (W x D x H): 315 x 410 x 745 mm
Weight 34 kg
MAS-Hose rewinder No more dangerous obstacles or tangled hoses on the floor with the additional hose retractor
PUR compressed air hose with woven fabric inlay
Inner dia. 8 mm
Extendable length: 9 + 1 m
Type Art. no.
MAS-Panel B060000
MAS-Store B060001
MAS-Tank H110610
MAS-Dryer H611000
MAS-Hose rewinder B312511
Compressors, mobile
38
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
Screw or piston compressor?
Or both?
Determining the requirements
When analysing the amount of compressed air you need, several parameters must be
considered. Of course, the compressed air consumers are the first variable that represent
a certain basic requirement. Beyond that, however, the pressure level, line losses and buffer
quantities must be taken into account. The required compressed air quality is classified as
another important component of the requirements analysis (including properties such as
moisture, oil content, particle proportion, etc.).
The system components
A wide variety of compressors are available for compressing air. The positive displacement
compressors include two main principles: piston compressors and screw compressors.
One of the most important features of piston compressors is intermittent operation, which
means that their duty cycle should not exceed 70 percent an hour. Screw compressors,
on the other hand, are the marathon runners among compressors. They perform best for
continuous air requirements. Continuous switching cycles diminish their service life because
the necessary operating temperature is either not reached or not maintained and condensate
forms in the oil circuit. Some of the consequences include increased wear and shorter
maintenance intervals, which result in higher costs.
In most cases, the compressed air requirements in trade and industry consist of a base load
and a peak load. Here, both compressor systems can be combined ideally. The screw compressor covers the base load, and the piston compressor covers the peak load.
Project engineering, installation and maintenance of
compressed air systems
A compressed air system is a highly complex system. Factors such as available space, room
temperature, air intake and exhaust, ambient conditions, accessibility for maintenance work
and noise development should also be considered. Equally important is the regular inspection
of the systems. Regular, timely maintenance with original spare parts can minimise failures and
increase the service life of the system.
Schneider airsystems will be glad to help you plan your compressed air system. Our
field service consultants analyse the on-site conditions, determine your current and future
compressed air requirements and create a matching compressed air system. Of course, your
individual wants and needs are taken into account as well. We also provide you with support
in installing and maintaining your compressed air system.
39
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
Assessments and tests –
Your compressed air station according to
Industrial Safety Regulations (BetrsichV.).
Technical safety and risk assessment
The so-called Industrial Safety Regulations (BetrSichV) have been binding for all operators of
pressure vessels that require monitoring since 01.01.2003.
Vessels that require monitoring include all compressed air vessels with a pressure content
product of PS x V > 50 PS = maximum permitted pressure / V = volume
Binding tests and assessments:
Completion of technical safety assessment(by qualified personnel according to the Industrial Safety Regulations (BetrSichV) or
ATS (Approved Test Centre such as TÜV, Dekra, etc.))
Definition of recurring tests and report to the relevant authorities(by qualified personnel according to the Industrial Safety Regulations or ATS)
Completion of recurring testsPS x V < 1,000 qualified personnel
PS x V > 1,000 ATS
Risk assessment of the compressed air station(by qualified personnel according to Industrial Safety Regulations)
Test of compressed air vessel prior to commissioning:PS x V < 200 ►no longer required
PS x V > 200 and < 1,000 for mobile compressors ►can be omitted
PS x V > 200 and < 1,000 for stationary compressors with ZUA approval ►qualified personnel
(both vessels on a tandem vessel must be tested individually – for 2 vessel with
PS x V = 10 bar each x 90 l = 900 each, testing can be performed by qualified personnel)
PS x V > 1,000 ►ATS
In terms of the Industrial Safety Regulations, a qualified person is a person who possesses the
technical knowledge required to test working equipment based on their professional training,
professional experience and recent professional activities.
Test deadlines:
The test deadlines are defined in the technical safety assessment with reference to the vessel
documentation. In the case of recurring tests, 5 years usually applies for the internal test and
10 years for the strength test in Germany. The availability of all vessel documents is essential
for all tests and technical safety assessments.
40
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
The new series of stationary UniMaster compressors combines outstanding power
and robustness, offers top-of-the-range equipment as standard, the choice of an
upright or horizontal vessel and can be used as an auxiliary compressor. The modular
system allows the separate attachment of a cold dryer and sound absorbing cover.
UniMasterAll-rounders
with individual fittings
41
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
UniMastervertical compressor
UniMasterhorizontal compressor
UniMasterauxiliary compressor
4,0 kW
5,5 and 7,5 kW
UniMaster STS4.0kW/5.5kW/7.5kW
10 bar /15 bar90l* /270l /500l vessel
UniMaster STS XDK
UniMaster STS XSDKUniMaster STS XS UniMaster STL XS UniMaster STB XS
UniMaster STL4.0kW/5.5kW/7.5kW
10 bar /15 bar270l /500l vessel
UniMaster STB4.0kW/5.5kW/7.5kW
10 bar /15 bar10l vessel
Assemble your compressor solution individually and select the right equipment from a maximum of
60 different combinations!
Choose a compressor with vertical or horizontal vessel or an auxiliary compressor from one of 3 different
performance categories with different sized vessels designed for a pressure of 10 or 15 bar and an additional
optional cold dryer and/or sound absorbing cover.
Whatever choice you make, you can benefit from a 15 year rust warranty on all vessels.
Make a wish –
The modular system for your compressor
UniMaster STS XDK
Sound absorbing cover (XS)
DK-ECO cold dryer
(XDK)
DK ECO cold dryer
(XDK)
* 90l vessel only available for 10 bar, dryer cannot be attached
42
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
UniMaster STS Vertical UniMaster compressors
Common features V-belt driven 2-cylinder unit with 2-stage
compression for 10 bar increases the output
and guarantees high efficiency
Vessel with burned-in interior coating
15-year rust guarantee on all vessels
Standard features include: all fittings, such
as electromagnetic valve or pressure switch
with relief valve for fully automatic opera-
tion, motor protection, safety valve, pressure
gauge, check valve, condensate drain cock
and stop cock
Standard features include: rubber vibration
elements
Electrical connection 400 V/50 Hz (three-
phase current)
For compressors with a 4 kW motor, observe
the regulations stipulated by the local power
station
It is compulsory for all compressors and
power units above 5.5 kW to be started via
an automatic star-delta switch. This switch is
not included in the scope of delivery but the
start-up relief is
Intermediate cooler and aftercooler quickly
cool the generated compressed air
The low speed of rotation reduces vibrations,
preserves the compressor components and
reduces noise levels
Large ventilator flywheel for optimal cooling
Easily accessible condensate trap under the
vessel. Also suitable for simple connection of
an Ecomat condensate discharger
Option of retrofitting cold dryer with minimum
fuss
Option of retrofitting a sound-absorbing cover
with minimum fuss (available for compressors
with 4 kW motor from spring 2011)
Type Art. no.
Pre
ssu
re(b
ar)
Su
ctio
n
cap
aci
ty(l
/min
)
Eff
. del
iver
y q
ua
nti
ty(l
/min
)2)
Dri
ve p
ow
er(k
W)
Sp
eed
(min
-1)
Tan
k v
ol.
(l)
Wei
gh
t(k
g)
Nois
e(d
B(A
))1)
Air
ou
tlet
Dim
ensi
on
s (W
x D
x H
)
UNM STS 660-10-90 H811000 10 660 520 4 1025 90 123 78 3/4 ̋ i 750x705x1170
UNM STS 660-10-270 H812000 10 660 520 4 1025 270 170 78 3/4 ̋ i 750x705x1800
UNM STS 660-10-500 H813000 10 660 520 4 1025 500 215 78 3/4 ̋ i 850x850x1945
UNM STS 580-15-270 H822000 15 580 470 4 915 270 177 78 3/4 ̋ i 750x705x1800
UNM STS 580-15-500 H823000 15 580 470 4 915 500 230 78 3/4 ̋ i 850x850x1945
UNM STS 1000-10-90 H831000 10 1000 790 5,5 995 90 187 82 3/4 ̋ i 975x705x1245
UNM STS 1000-10-270 H832000 10 1000 790 5,5 995 270 234 82 3/4 ̋ i 975x705x1875
UNM STS 1000-10-500 H833000 10 1000 790 5,5 995 500 279 82 3/4 ̋ i 975x850x2020
UNM STS 780-15-270 H842000 15 780 640 5,5 830 270 241 80 3/4 ̋ i 975x705x1875
UNM STS 780-15-500 H843000 15 780 640 5,5 830 500 294 80 3/4 ̋ i 975x850x2020
UNM STS 1250-10-90 H851000 10 1250 980 7,5 1240 90 199 84 3/4 ̋ i 975x705x1245
UNM STS 1250-10-270 H852000 10 1250 980 7,5 1240 270 246 84 3/4 ̋ i 975x705x1875
UNM STS 1250-10-500 H853000 10 1250 980 7,5 1240 500 291 84 3/4 ̋ i 975x850x2020
UNM STS 1000-15-270 H862000 15 1000 790 7,5 995 270 253 82 3/4 ̋ i 975x705x1875
UNM STS 1000-15-500 H863000 15 1000 790 7,5 995 500 306 82 3/4 ̋ i 975x850x2020
1) LpA1 sound pressure level according to DIN EN ISO 2151 and application of EN ISO 3744 2) Max. volume flow at service pressure in acc. with ISO 1217 (service pressure = pressure specification – 1 bar)
Stationary piston compressorsThe piston compressors with individual fittings
43
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
UniMaster STS Silent Sound-insulated compressors
Common features V-belt driven 2-cylinder unit with 2-stage
compression for 10 bar increases the output
and guarantees high efficiency
With sound absorption hood, extremely quiet
Set up in sensitive areas possible because
the compressor is fitted with a sound
absorption hood
Vessel with burned-in interior coating
15-year rust guarantee on all vessels
Standard features include: all fittings, such
as electromagnetic valve or pressure switch
with relief valve for fully automatic opera-
tion, motor protection, safety valve, pressure
gauge, check valve, condensate drain cock
and stop cock
Standard features include: rubber vibration
elements
Electrical connection 400 V/50 Hz
(three-phase current)
For compressors with a 4 kW motor, observe
the regulations stipulated by the local power
station
It is compulsory for all compressors and
power units above 5.5 kW to be started via
an automatic star-delta switch. This switch is
not included in the scope of delivery but the
start-up relief is
Intermediate cooler and aftercooler quickly
cool the generated compressed air
The low speed of rotation reduces vibrations,
preserves the compressor components and
reduces noise levels
Large ventilator flywheel for optimal cooling
Easily accessible condensate trap under the
vessel. Also suitable for simple connection of
an Ecomat condensate discharger
Option of retrofitting cold dryer with minimum
fuss
Type Art. no.
Pre
ssu
re(b
ar)
Su
ctio
n
cap
aci
ty(l
/min
)
Eff
. del
iver
y q
ua
nti
ty(l
/min
)2)
Dri
ve p
ow
er(k
W)
Sp
eed
(min
-1)
Tan
k v
ol.
(l)
Wei
gh
t(k
g)
Nois
e(d
B(A
))1)
Air
ou
tlet
Dim
ensi
on
s (W
x D
x H
)
UNM STS 660-10-90 XS H811100 10 660 520 4,0 1025 90 162 69 3/4 ̋ i 775x740x1275
UNM STS 660-10-270 XS H812100 10 660 520 4,0 1025 270 209 69 3/4 ̋ i 775x740x1905
UNM STS 660-10-500 XS H813100 10 660 520 4,0 1025 500 254 69 3/4 ̋ i 850x850x2055
UNM STS 580-15-270 XS H822100 15 580 470 4,0 915 270 216 69 3/4 ̋ i 775x740x1905
UNM STS 580-15-500 XS H823100 15 580 470 4,0 915 500 269 69 3/4 ̋ i 850x850x2055
1) LpA1 sound pressure level according to DIN EN ISO 2151 and application of EN ISO 3744 2) Max. volume flow at service pressure in acc. with ISO 1217 (service pressure = pressure specification – 1 bar)
Stationary piston compressorsThe piston compressors with individual fittings
44
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
UniMaster STS with cold dryer
Vertical UniMaster compressors with cold dryer
Common features V-belt driven 2-cylinder unit with 2-stage
compression for 10 bar increases the output
and guarantees high efficiency
Vessel with burned-in interior coating
15-year rust guarantee on all vessels
Standard features include: all fittings, such
as electromagnetic valve or pressure switch
with relief valve for fully automatic opera-
tion, motor protection, safety valve, pressure
gauge, check valve, condensate drain cock
and stop cock
Standard features include: rubber vibration
elements
Electrical connection 400 V/50 Hz
(three-phase current)
For compressors with a 4 kW motor, observe
the regulations stipulated by the local power
station
It is compulsory for all compressors and
power units above 5.5 kW to be started via
an automatic star-delta switch. This switch
is not included in the scope of delivery but
the start-up relief is
Intermediate cooler and aftercooler quickly
cool the generated compressed air
The low speed of rotation reduces vibrations,
preserves the compressor components and
reduces noise levels
Large ventilator flywheel for optimal cooling
Easily accessible condensate trap under the
vessel. Also suitable for simple connection
of an Ecomat condensate discharger
High-performance cold dryer with super dry
technology and ECO switch-off
Improved compressed air quality. The cold
dryer draws the unwanted condensation
water from the compressed air. Standard
features include a bypass line for dryer
maintenance
Option of retrofitting a sound-absorbing cover
with minimum fuss (available for compressors
with 4 kW motor from spring 2011)
Type Art. no.
Pre
ssu
re(b
ar)
Su
ctio
n
cap
aci
ty(l
/min
)
Eff
. del
iver
y q
ua
nti
ty(l
/min
)2)
Dri
ve p
ow
er(k
W)
Sp
eed
(min
-1)
Tan
k v
ol.
(l)
Wei
gh
t(k
g)
Nois
e(d
B(A
))1)
Air
ou
tlet
Dim
ensi
on
s (W
x D
x H
)
UNM STS 660-10-270 XDK H812010 10 660 520 4,0 1025 270 206 78 3/4 ̋ i 945x705x1800
UNM STS 660-10-500 XDK H813010 10 660 520 4,0 1025 500 251 78 3/4 ̋ i 1070x850x1945
UNM STS 580-15-270 XDK H822010 15 580 470 4,0 915 270 213 78 3/4 ̋ i 945x705x1800
UNM STS 580-15-500 XDK H823010 15 580 470 4,0 915 500 266 78 3/4 ̋ i 1070x850x1945
UNM STS 1000-10-270 XDK H832010 10 1000 790 5,5 995 270 271 82 3/4 ̋ i 1070x705x1875
UNM STS 1000-10-500 XDK H833010 10 1000 790 5,5 995 500 316 82 3/4 ̋ i 1145x850x2020
UNM STS 780-15-270 XDK H842010 15 780 640 5,5 830 270 278 80 3/4 ̋ i 1070x705x1875
UNM STS 780-15-500 XDK H843010 15 780 640 5,5 830 500 331 80 3/4 ̋ i 1145x850x2020
UNM STS 1250-10-270 XDK H852010 10 1250 980 7,5 1240 270 283 84 3/4 ̋ i 1070x705x1875
UNM STS 1250-10-500 XDK H853010 10 1250 980 7,5 1240 500 328 84 3/4 ̋ i 1145x850x2020
UNM STS 1000-15-270 XDK H862010 15 1000 790 7,5 995 270 290 82 3/4 ̋ i 1070x705x1875
UNM STS 1000-15-500 XDK H863010 15 1000 790 7,5 995 500 343 82 3/4 ̋ i 1145x850x2020
1) LpA1 sound pressure level according to DIN EN ISO 2151 and application of EN ISO 3744 2) Max. volume flow at service pressure in acc. with ISO 1217 (service pressure = pressure specification – 1 bar)
Stationary piston compressorsThe piston compressors with individual fittings
45
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
UniMaster STS Silent with cold dryer
Sound-insulated compressors
Common features V-belt driven 2-cylinder unit with 2-stage
compression for 10 bar increases the output
and guarantees high efficiency
With sound absorption hood, extremely quiet
Set up in sensitive areas possible because
the compressor is fitted with a sound absorp-
tion hood
Vessel with burned-in interior coating
15-year rust guarantee on all vessels
Standard features include: all fittings, such
as electromagnetic valve or pressure switch
with relief valve for fully automatic operation,
motor protection, safety valve, pressure
gauge, check valve, condensate drain cock
and stop cock
Standard features include: rubber vibration
elements
Electrical connection 400 V/50 Hz
(three-phase current)
For compressors with a 4 kW motor, observe
the regulations stipulated by the local power
station
It is compulsory for all compressors and
power units above 5.5 kW to be started via
an automatic star-delta switch. This switch
is not included in the scope of delivery but
the start-up relief is
Intermediate cooler and aftercooler quickly
cool the generated compressed air
The low speed of rotation reduces vibrations,
preserves the compressor components and
reduces noise levels
Large ventilator flywheel for optimal cooling
Easily accessible condensate trap under the
vessel. Also suitable for simple connection
of an Ecomat condensate discharger
High-performance cold dryer with super dry
technology and ECO switch-off
Improved compressed air quality. The cold
dryer draws the unwanted condensation
water from the compressed air. Standard
features include a bypass line for dryer
maintenance.
Type Art. no.
Pre
ssu
re(b
ar)
Su
ctio
n
cap
aci
ty(l
/min
)
Eff
. del
iver
y q
ua
nti
ty(l
/min
)2)
Dri
ve p
ow
er(k
W)
Sp
eed
(min
-1)
Tan
k v
ol.
(l)
Wei
gh
t(k
g)
Nois
e(d
B(A
))1)
Air
ou
tlet
Dim
ensi
on
s (W
x D
x H
)
UNM STS 660-10-270 XSDK H812110 10 660 520 4,0 1025 270 245 69 3/4 ̋ i 960x740x1905
UNM STS 660-10-500 XSDK H813110 10 660 520 4,0 1025 500 290 69 3/4 ̋ i 1070x850x2055
UNM STS 580-15-270 XSDK H822110 15 580 470 4,0 915 270 252 69 3/4 ̋ i 960x740x1905
UNM STS 580-15-500 XSDK H823110 15 580 470 4,0 915 500 305 69 3/4 ̋ i 1070x850x2055
1) LpA1 sound pressure level according to DIN EN ISO 2151 and application of EN ISO 3744 2) Max. volume flow at service pressure in acc. with ISO 1217 (service pressure = pressure specification – 1 bar)
Stationary piston compressorsThe piston compressors with individual fittings
46
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
UniMaster STL Horizontal UniMaster compressors
Common features V-belt driven 2-cylinder unit with 2-stage
compression for 10 bar increases the output
and guarantees high efficiency
Vessel with burned-in interior coating
15-year rust guarantee on all vessels
Standard features include: all fittings, such
as electromagnetic valve or pressure switch
with relief valve for fully automatic opera-
tion, motor protection, safety valve, pressure
gauge, check valve, condensate drain cock
and stop cock
Standard features include: rubber vibration
elements
Electrical connection 400 V/50 Hz
(three-phase current)
For compressors with a 4 kW motor, observe
the regulations stipulated by the local power
station
It is compulsory for all compressors and
power units above 5.5 kW to be started via
an automatic star-delta switch. This switch
is not included in the scope of delivery but
the start-up relief is
Intermediate cooler and aftercooler quickly
cool the generated compressed air
The low speed of rotation reduces vibrations,
preserves the compressor components and
reduces noise levels
Large ventilator flywheel for optimal cooling
Easily accessible condensate trap under the
vessel. Also suitable for simple connection
of an Ecomat condensate discharger
Option of retrofitting a sound-absorbing cover
with minimum fuss (available for compressors
with 4 kW motor from spring 2011)
Type Art. no.
Pre
ssu
re(b
ar)
Su
ctio
n
cap
aci
ty(l
/min
)
Eff
. del
iver
y q
ua
nti
ty(l
/min
)2)
Dri
ve p
ow
er(k
W)
Sp
eed
(min
-1)
Tan
k v
ol.
(l)
Wei
gh
t(k
g)
Nois
e(d
B(A
))1)
Air
ou
tlet
Dim
ensi
on
s (W
x D
x H
)
UNM STL 660-10-270 H815000 10 660 520 4,0 1025 270 174 78 3/4 ̋ i 1620x515x1205
UNM STL 660-10-500 H816000 10 660 520 4,0 1025 500 228 78 3/4 ̋ i 1950x625x1305
UNM STL 580-15-270 H825000 15 580 470 4,0 915 270 188 78 3/4 ̋ i 1620x515x1205
UNM STL 580-15-500 H826000 15 580 470 4,0 915 500 244 78 3/4 ̋ i 1950x625x1305
UNM STL 1000-10-270 H835000 10 1000 790 5,5 995 270 238 82 3/4 ̋ i 1620x555x1285
UNM STL 1000-10-500 H836000 10 1000 790 5,5 995 500 292 82 3/4 ̋ i 1950x625x1380
UNM STL 780-15-270 H845000 15 780 640 5,5 830 270 252 80 3/4 ̋ i 1620x555x1285
UNM STL 780-15-500 H846000 15 780 640 5,5 830 500 308 80 3/4 ̋ i 1950x625x1380
UNM STL 1250-10-270 H855000 10 1250 980 7,5 1240 270 250 84 3/4 ̋ i 1620x555x1285
UNM STL 1250-10-500 H856000 10 1250 980 7,5 1240 500 304 84 3/4 ̋ i 1950x625x1380
UNM STL 1000-15-270 H865000 15 1000 790 7,5 995 270 264 82 3/4 ̋ i 1620x555x1285
UNM STL 1000-15-500 H866000 15 1000 790 7,5 995 500 320 82 3/4 ̋ i 1950x625x1380
1) LpA1 sound pressure level according to DIN EN ISO 2151 and application of EN ISO 3744 2) Max. volume flow at service pressure in acc. with ISO 1217 (service pressure = pressure specification – 1 bar)
Stationary piston compressorsThe piston compressors with individual fittings
47
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
UniMaster STL Silent Sound-insulated compressors
Common features V-belt driven 2-cylinder unit with 2-stage
compression for 10 bar increases the output
and guarantees high efficiency
With sound absorption hood, extremely
quiet
Set up in sensitive areas possible because
the compressor is fitted with a sound
absorption hood
Vessel with burned-in interior coating
15-year rust guarantee on all vessels
Standard features include: all fittings, such
as electromagnetic valve or pressure switch
with relief valve for fully automatic operation,
motor protection, safety valve, pressure
gauge, check valve, condensate drain cock
and stop cock
Standard features include: rubber vibration
elements
Electrical connection 400 V/50 Hz
(three-phase current)
For compressors with a 4 kW motor, observe
the regulations stipulated by the local power
station
It is compulsory for all compressors and
power units above 5.5 kW to be started via
an automatic star-delta switch. This switch
is not included in the scope of delivery but
the start-up relief is
Intermediate cooler and aftercooler quickly
cool the generated compressed air
The low speed of rotation reduces vibrations,
preserves the compressor components and
reduces noise levels
Large ventilator flywheel for optimal cooling
Easily accessible condensate trap under the
vessel. Also suitable for simple connection
of an Ecomat condensate discharger
Type Art. no.
Pre
ssu
re(b
ar)
Su
ctio
n
cap
aci
ty(l
/min
)
Eff
. del
iver
y q
ua
nti
ty(l
/min
)2)
Dri
ve p
ow
er(k
W)
Sp
eed
(min
-1)
Tan
k v
ol.
(l)
Wei
gh
t(k
g)
Nois
e(d
B(A
))1)
Air
ou
tlet
Dim
ensi
on
s (W
x D
x H
)
UNM STL 660-10-270 XS H815100 10 660 520 4,0 1025 270 213 69 3/4 ̋ i 1620x600x1315
UNM STL 660-10-500 XS H816100 10 660 520 4,0 1025 500 267 69 3/4 ̋ i 1950x670x1415
UNM STL 580-15-270 XS H825100 15 580 470 4,0 915 270 227 69 3/4 ̋ i 1620x600x1315
UNM STL 580-15-500 XS H826100 15 580 470 4,0 915 500 283 69 3/4 ̋ i 1950x670x1415
1) LpA1 sound pressure level according to DIN EN ISO 2151 and application of EN ISO 3744 2) Max. volume flow at service pressure in acc. with ISO 1217 (service pressure = pressure specification – 1 bar)
Stationary piston compressorsThe piston compressors with individual fittings
48
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
UniMaster STB UniMaster auxiliary compressors
Common features V-belt driven 2-cylinder unit with 2-stage
compression for 10 bar increases the output
and guarantees high efficiency
Vessel with burned-in interior coating
15-year rust guarantee on all vessels
Standard features include: all fittings, such
as electromagnetic valve or pressure switch
with relief valve for fully automatic operation,
motor protection, safety valve, pressure
gauge, check valve, condensate drain cock
and ball valve
Standard features include: rubber vibration
elements
Electrical connection 400 V/50 Hz
(three-phase current)
For compressors with a 4 kW motor, observe
the regulations stipulated by the local power
station
It is compulsory for all compressors and
power units above 5.5 kW to be started via
an automatic star-delta switch. This switch is
not included in the scope of delivery but the
start-up relief is
Can be used if the existing air flow rate is
insufficient, to cover peak capacities, to
guarantee 100% reliability and/or if old
machines require expensive repairs
Intermediate cooler and aftercooler quickly
cool the generated compressed air
Series standard with control vessel for
automated operation
A pressure vessel with the appropriate
dimensions must be available to ensure that
the auxiliary compressor functions correctly.
The auxiliary compressor is connected to
this pressure vessel via an elastic connecting
pipe
Option of retrofitting a sound-absorbing cover
with minimum fuss (available for compressors
with 4 kW motor from spring 2011)
Type Art. no.
Pre
ssu
re(b
ar)
Su
ctio
n
cap
aci
ty(l
/min
)
Eff
. del
iver
y q
ua
nti
ty(l
/min
)2)
Dri
ve p
ow
er(k
W)
Sp
eed
(min
-1)
Tan
k v
ol.
(l)
Wei
gh
t(k
g)
Nois
e(d
B(A
))1)
Air
ou
tlet
Dim
ensi
on
s (W
x D
x H
)
UNM STB 660-10-10 H814000 10 660 520 4,0 1025 10 94 78 3/4 ̋ i 945x605x690
UNM STB 580-15-10 H824000 15 580 470 4,0 915 10 94 78 3/4 ̋ i 945x605x690
UNM STB 1000-10-10 H834000 10 1000 790 5,5 995 10 158 82 3/4 ̋ i 1005x650x770
UNM STB 780-15-10 H844000 15 780 640 5,5 830 10 158 80 3/4 ̋ i 1005x650x770
UNM STB 1250-10-10 H854000 10 1250 980 7,5 1240 10 170 84 3/4 ̋ i 1005x650x770
UNM STB 1000-15-10 H864000 15 1000 790 7,5 995 10 170 82 3/4 ̋ i 1005x650x770
1) LpA1 sound pressure level according to DIN EN ISO 2151 and application of EN ISO 3744 2) Max. volume flow at service pressure in acc. with ISO 1217 (service pressure = pressure specification – 1 bar)
Stationary piston compressorsThe piston compressors with individual fittings
49
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
UniMaster STB Silent Sound-insulated compressors
Common features V-belt driven 2-cylinder unit with 2-stage
compression for 10 bar increases the output
and guarantees high efficiency
With sound absorption hood, extremely quiet
Set up in sensitive areas possible because
the compressor is fitted with a sound
absorption hood
Vessel with burned-in interior coating
15-year rust guarantee on all vessels
Standard features include: all fittings, such
as electromagnetic valve or pressure switch
with relief valve for fully automatic operation,
motor protection, safety valve, pressure
gauge, check valve, condensate drain cock
and ball valve
Standard features include: rubber vibration
elements
Electrical connection 400 V/50 Hz
(three-phase current)
For compressors with a 4 kW motor, observe
the regulations stipulated by the local power
station
It is compulsory for all compressors and
power units above 5.5 kW to be started via
an automatic star-delta switch. This switch
is not included in the scope of delivery but
the start-up relief is
Can be used if the existing air flow rate is
insufficient, to cover peak capacities, to
guarantee 100% reliability and/or if old
machines require expensive repairs
Intermediate cooler and aftercooler quickly
cool the generated compressed air
Series standard with control vessel for
automated operation
A pressure vessel with the appropriate
dimensions must be available to ensure
that the auxiliary compressor functions
correctly. The auxiliary compressor is
connected to this pressure vessel via an
elastic connecting pipe
Type Art. no.
Pre
ssu
re(b
ar)
Su
ctio
n
cap
aci
ty(l
/min
)
Eff
. del
iver
y q
ua
nti
ty(l
/min
)2)
Dri
ve p
ow
er(k
W)
Sp
eed
(min
-1)
Tan
k v
ol.
(l)
Wei
gh
t(k
g)
Nois
e(d
B(A
))1)
Air
ou
tlet
Dim
ensi
on
s (W
x D
x H
)
UNM STB 660-10-10 XS H814100 10 660 520 4,0 1025 10 133 69 3/4 ̋ i 920x700x820
UNM STB 580-15-10 XS H824100 15 580 470 4,0 915 10 133 69 3/4 ̋ i 920x700x820
1) LpA1 sound pressure level according to DIN EN ISO 2151 and application of EN ISO 3744 2) Max. volume flow at service pressure in acc. with ISO 1217 (service pressure = pressure specification – 1 bar)
Sound absorbing cover Type Art. no.
SDH UNM ST 4,0 B800100
Set up in sensitive areas possible because
the compressor is fitted with a sound
absorption hood
Option of retrofitting a sound-absorbing
cover with minimum fuss (available for
compressors with 4 kW motor from spring
2011)
Stationary piston compressorsThe piston compressors with individual fittings
50
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
UniMaster STH on tandem vessel
Tandem vessel, no technical inspection required
Common features V-belt driven 2-cylinder unit with 2-stage
compression for 10 bar increases the output
and guarantees high efficiency
Vessel with burned-in interior coating
15-year rust guarantee on all vessels
Standard features include: all fittings, such
as electromagnetic valve or pressure switch
with relief valve for fully automatic operation,
motor protection, safety valve, pressure
gauge, check valve, condensate drain cock
and stop cock
Standard features include: rubber vibration
elements
Electrical connection 400 V/50 Hz
(three-phase current)
For compressors with a 4 kW motor, observe
the regulations stipulated by the local power
station
Easily accessible condensate trap under the
vessel. Also suitable for simple connection
of an Ecomat condensate discharger
Machines are attached to a pallet, which
makes transportation and set-up much
easier
With 2x90-l vessel, TÜV-approved (Technical
Inspection Agency) through type test
according to Ordinance on Industrial Safety
and Health, section 17. No installation check
or recurring checks required by TÜV. Check
by qualified person (specialist) is sufficient
Type Art. no.
Pre
ssu
re(b
ar)
Su
ctio
n
cap
aci
ty(l
/min
)
Eff
. del
iver
y q
ua
nti
ty(l
/min
)2)
Dri
ve p
ow
er(k
W)
Sp
eed
(min
-1)
Tan
k v
ol.
(l)
Wei
gh
t(k
g)
Nois
e(d
B(A
))1)
Air
ou
tlet
Dim
ensi
on
s (W
x D
x H
)
UNM STH 650-10-180 H112017 10 650 520 4,0 950 2x90 175 83 3/4 ̋ i 1200x800x1240
1) LpA1 sound pressure level according to DIN EN ISO 2151 and application of EN ISO 3744 2) Max. volume flow at service pressure in acc. with ISO 1217 (service pressure = pressure specification – 1 bar)
UniMaster STH tandem unit
Compressors for universal use – The solution for maximum reliability
Common features 2 power units, each with 2 cylinders,
two-stage compression
Two power units fitted to one vessel –
maximum reliability (if one power unit should
fail) and sufficient reserves in the event of
a peak in demand
With basic load alternation switch as
standard (control system for distributing
basic and additional air supplies for several
power units)
Vessel with burned-in interior coating
15-year rust guarantee on all vessels
Standard features include: all fittings, such
as electromagnetic valve or pressure switch
with relief valve for fully automatic operation,
motor protection, safety valve, pressure
gauge, check valve, condensate drain cock
and stop cock
Standard features include: rubber vibration
elements
Electrical connection 400 V/50 Hz
(three-phase current)
Easily accessible condensate trap under the
vessel. Also suitable for simple connection
of an Ecomat condensate discharger
Type Art. no.
Pre
ssu
re(b
ar)
Su
ctio
n
cap
aci
ty(l
/min
)
Eff
. del
iver
y q
ua
nti
ty(l
/min
)2)
Dri
ve p
ow
er(k
W)
Sp
eed
(min
-1)
Tan
k v
ol.
(l)
Wei
gh
t(k
g)
No
ise
(dB
(A))
1)
Air
ou
tlet
Dim
ensi
on
s (W
x D
x H
)
UNM STH 650/650-10-500 H112022 10 2x650 2x520 2x4,0 950 500 280 83 1 ̋ i 2320x700x1200
1) LpA1 sound pressure level according to DIN EN ISO 2151 and application of EN ISO 3744 2) Max. volume flow at service pressure in acc. with ISO 1217 (service pressure = pressure specification – 1 bar)
Stationary piston compressorsThe piston compressors with individual fittings
51
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
SilentMaster STS Other sound-insulated compressors
Common features V-belt driven 2-cylinder unit with 2-stage
compression for 10 bar increases the output
and guarantees high efficiency
The electronic oil level monitor and the
operating hours counter make it easier to
observe service and maintenance intervals.
The compressor switches off automatically
if the oil level is insufficient
Electrical connection 400 V/50 Hz
(three-phase current)
Intermediate cooler and aftercooler quickly
cool the generated compressed air
Compact and space-saving due to overall
dimensions
Low-vibration operation
Type Art. no.
Pre
ssu
re(b
ar)
Su
ctio
n
cap
aci
ty(l
/min
)
Eff
. del
iver
y q
ua
nti
ty(l
/min
)2)
Dri
ve p
ow
er(k
W)
Sp
eed
(min
-1)
Wei
gh
t(k
g)
Nois
e(d
B(A
))1)
Air
ou
tlet
Volt
ag
e(V
)
Dim
ensi
on
s (W
x D
x H
)
SEM STS 850-10 H114006 10 850 680 5,5 1240 155 67 3/4 ̋ i 400 790x785x700
ZPM STS 750-15 H113011 15 750 525 5,5 785 140 67 3/4 ̋ i 400 790x785x700
ZPM STS 1050-15 H113012 15 1050 765 7,5 1160 210 69 3/4 ̋ i 400 770x620x1100
1) LpA1 sound pressure level according to DIN EN ISO 2151 and application of EN ISO 3744 2) Max. volume flow at service pressure in acc. with ISO 1217 (service pressure = pressure specification – 1 bar)
Stationary piston compressorsThe piston compressors with individual fittings
52
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
Medic-Air compressors have a high-quality, oil-free power unit with polytetrafluoroethylene-
coated pistons, generate minimal noise and are therefore ideal for use in medical practices.
Medic-Air compressorsSound-insulated, oil-free compressors
for an outstanding air quality
53
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
Medic-Air compressors Sound-insulated oil-free compressors
Common features High-quality oil-free power units with polytetrafluoroethylene-coated
pistons
No oil changes, no oil in the condensate
The low speed of rotation reduces vibrations, preserves the
compressor components and reduces noise levels
Standard features include: all safety fittings and electric connection
cable with plug
Vessel with burned-in interior coating
15-year rust guarantee on all vessels
With sound absorption hood, extremely quiet
Extra fan
MA 150-25 W-Silent Stationary
1 cylinder
With water separator (with filter insert) and condensate collection vessel
MA 300-50 W-Silent Stationary
2 cylinders, V layout
With water separator (with filter insert) and condensate collection vessel
MA 600-90 D-Silent Stationary
2 x 2 cylinders in V layout
Three-phase current model
Air outlet with ball valve 1/2 ̋
With basic load alternation switch as standard (control system for distributing basic and additional
air supplies for several power units)
Type Art. no.
Pre
ssu
re(b
ar)
Su
ctio
n
cap
aci
ty(l
/min
)
Eff
. del
iver
y q
ua
nti
ty(l
/min
)2)
Dri
ve p
ow
er(k
W)
Sp
eed
(min
-1)
Tan
k v
ol.
(l)
Wei
gh
t(k
g)
No
ise
(dB
(A))
1)
Vo
lta
ge
(V)
Dim
ensi
on
s (W
x D
x H
)
MA 150-25 W-Silent H300060 8 150 100 1,1 1420 24 48 56 230 820x400x750
MA 300-50 W-Silent H300062 8 300 200 1,8 1420 50 75 62 230 980x500x800
MA 600-90 D-Silent H300064 8 2x300 2x200 2x1,8 1420 90 115 64 400 1200x580x900
1) Sound pressure level at distance of 1 m according to DIN 45635, T 13 2) In acc. with ISO 1217
Stationary piston compressorsThe piston compressors with individual fittings
54
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
The impressive features of the AirMaster screw compressors include easy access to
the machine housing, sound absorbing mats for reduced operating noise, particularly
easy handling and a clearly laid out, easily accessible operating panel for a high
degree of operating comfort.
AirMasterScrew compressors
with the Easy Service Concept
55
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
Clearly arranged, easily
accessible operating panel
for easy handling and maximum operating comfort
Easy to understand electronic control system thanks to
20-character clear text display in
10 different languages
Maximum safety through
integrated control of rotation
direction as well as effective
control, warning and safety
systems
Saves time and costs in maintenance situations due to clear arrangement of
all components
Simple oil level control through oil inspection glass
Easy Service Concept for the best
access possibilities due to a machine
housing that can be fully opened
Particularly long service life of the compressor also under extreme conditions as the oil temperature is
subject to fewer deviations
Optimal operating temperatures thanks to electronically controlled
fan and new cooling air guide for
optimised air circulation
Maintenance-free electric ventilator
Reduced noise during operation due to the sound-
absorbing mat on the housing,
a special fan and optimised air
guide in the housing
Optimal positioning possibilities due to
compressed air outlet on the rear of the
compressor
Simple set-up as a fork-lift
truck can access the
compressor from all sides
Simple assembly of outlet channel through exhaust air guide directed
upwards
AirMaster –
The new screw compressors
UniqueUsing the AM 4-10 E1 as an example
56
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
AirMaster individual compressors
Space-saving single compressor
Common features Robust, V-belt driven screw-type
compressors with durable, compressor
blocks
Easy service concept: machine housing that
can be opened fully for the best possible
access to all components
The layout of all components (such as the
oil filter, air filter, oil vessel and external
microfilter) saves time and costs during
maintenance work
Simple handling and maximum operating
comfort thanks to easy-to-understand
electronic control system with 20-character
clear text display in 10 different languages
Maximum safety thanks to auxiliary control,
warning and safety systems
Integrated control of rotation direction
prevents expensive damage during operation
Load and operating hours counter for correct
service and maintenance intervals
Quiet due to soundproofed housing and
optimised air flow in the housing
Minimised fluctuations in the oil temperature
in comparison to traditional thermostat
control valves extend the service life of the
compressor
The electronically controlled fan and air
circulation system with new type of cooling
air duct regulate the operating temperatures
Small base that saves space
Simple and uncomplicated set-up as the
compressor can be accessed from all sides
with the lift truck
Optimal positioning options of the screw
compressor thanks to compressed air outlet
on the rear
Simple assembly of outlet channel through
exhaust air guide directed upwards
Large multi-purpose cooler for oil and
compressed air
Simple oil level control through oil inspection
glass
Standard features include: star-delta switch
Type Art. no.
Pre
ssu
re(b
ar)
Volu
me
flow
(l/m
in)2
)
Volt
ag
e(V
)
Dri
ve p
ow
er(k
W)
Tan
k v
ol.
(l)
Nois
e(d
B(A
))1)
Air
ou
tlet
Wei
gh
t(k
g)
Dim
ensi
on
s (W
x D
x H
)
AM4-10 E1 H415460 10 460 400 4,0 - 62 1/2 ̋ 168,50 700x700x900
AM5-8 E1 H415570 8 750 400 5,5 - 65 1/2 ̋ 168,50 700x700x900
AM5-10 E1 H415560 10 630 400 5,5 - 65 1/2 ̋ 168,50 700x700x900
AM5-13 E1 H415580 13 520 400 5,5 - 65 1/2 ̋ 168,50 700x700x900
AM7-10 E1 H415660 10 935 400 7,5 - 67 1/2 ̋ 168,50 700x700x900
1) LpA1 sound pressure level according to DIN EN ISO 2151 and application of EN ISO 3744 2) Max. volume flow at service pressure in acc. with ISO 1217 (service pressure = pressure specification – 1 bar)
Screw compressors, stationaryThe screw compressor with the Easy-Service Concept
57
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
AirMaster compressors on vessel
The traditional solution with horizontal vessel
Common features Robust, V-belt driven screw-type
compressors with durable, compressor
blocks
Easy service concept: machine housing that
can be opened fully for the best possible
access to all components
The layout of all components (such as the
oil filter, air filter, oil vessel and external
microfilter) saves time and costs during
maintenance work
Simple handling and maximum operating
comfort thanks to easy-to-understand
electronic control system with 20-character
clear text display in 10 different languages
Maximum safety thanks to auxiliary control,
warning and safety systems
Integrated control of rotation direction
prevents expensive damage during
operation
Small base that saves space
Simple assembly of outlet channel through
exhaust air guide directed upwards
Vessel with burned-in interior coating
15-year rust guarantee on all vessels
Type Art. no.
Pre
ssu
re(b
ar)
Volu
me
flow
(l/m
in)2
)
Volt
ag
e(V
)
Dri
ve p
ow
er(k
W)
Tan
k v
ol.
(l)
Nois
e(d
B(A
))1)
Air
ou
tlet
Wei
gh
t(k
g)
Dim
ensi
on
s (W
x D
x H
)
AM4-10 E1 270 H415461 10 460 400 4,0 270 62 G 3/4 ̋ 263,50 1000x800x1650
AM5-10 E1 270 H415561 10 630 400 5,5 270 65 G 3/4 ̋ 263,50 1000x800x1650
AM7-10 E1 270 H415661 10 935 400 7,5 270 67 G 3/4 ̋ 263,50 1000x800x1650
1) LpA1 sound pressure level according to DIN EN ISO 2151 and application of EN ISO 3744 2) Max. volume flow at service pressure in acc. with ISO 1217 (service pressure = pressure specification – 1 bar)
Screw compressors, stationaryThe screw compressor with the Easy-Service Concept
AirMaster compressors with cold dryer on vessel
The traditional solution with horizontal vessel
Common features Robust, V-belt driven screw-type
compressors with durable, compressor
blocks
Easy service concept: machine housing that
can be opened fully for the best possible
access to all components
The layout of all components (such as the
oil filter, air filter, oil vessel and external
microfilter) saves time and costs during
maintenance work
Simple handling and maximum operating
comfort thanks to easy-to-understand
electronic control system with 20-character
clear text display in 10 different languages
Maximum safety thanks to auxiliary control,
warning and safety systems
Integrated control of rotation direction
prevents expensive damage during operation
Small base that saves space
Simple assembly of outlet channel through
exhaust air guide directed upwards
Vessel with burned-in interior coating
15-year rust guarantee on all vessels
High-performance cold dryer with super dry
technology and ECO switch-off
Improved compressed air quality. The cold
dryer draws the unwanted condensation
water from the compressed air. Standard
features include a bypass line for dryer
maintenance.
Type Art. no.
Pre
ssu
re(b
ar)
Vo
lum
e fl
ow
(l/m
in)2
)
Vo
lta
ge
(V)
Dri
ve p
ow
er(k
W)
Tan
k v
ol.
(l)
No
ise
(dB
(A))
1)
Air
ou
tlet
Wei
gh
t(k
g)
Dim
ensi
on
s (W
x D
x H
)
AM4-10 E1 270 DK 600 H415462 10 460 400 4,0 270 62 G 3/4 ̋ 288,50 1170x800x1650
AM5-10 E1 270 DK 600 H415562 10 630 400 5,5 270 65 G 3/4 ̋ 288,50 1170x800x1650
AM7-10 E1 270 DK 985 H415662 10 935 400 7,5 270 67 G 3/4 ̋ 288,50 1170x800x1650
1) LpA1 sound pressure level according to DIN EN ISO 2151 and application of EN ISO 3744 2) Max. volume flow at service pressure in acc. with ISO 1217 (service pressure = pressure specification – 1 bar)
58
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
AirMaster compressors on tandem vessel
Tandem vessel, no technical inspection required
Common features Robust, V-belt driven screw-type
compressors with durable, compressor
blocks
Easy service concept: machine housing that
can be opened fully for the best possible
access to all components
The layout of all components (such as the
oil filter, air filter, oil vessel and external
microfilter) saves time and costs during
maintenance work
Simple handling and maximum operating
comfort thanks to easy-to-understand
electronic control system with 20-character
clear text display in 10 different languages
Maximum safety thanks to auxiliary control,
warning and safety systems
Integrated control of rotation direction
prevents expensive damage during operation
Small base that saves space
Simple assembly of outlet channel through
exhaust air guide directed upwards
Vessel with burned-in interior coating
15-year rust guarantee on all vessels
Does not require Technical Inspection
Authority certification because of type
approval test in accordance with Industrial
Safety Regulation § 17. No set-up inspection
or other repeat inspections. Testing by
a qualified expert is sufficient.
Type Art. no.
Pre
ssu
re(b
ar)
Volu
me
flow
(l/m
in)2
)
Volt
ag
e(V
)
Dri
ve p
ow
er(k
W)
Tan
k v
ol.
(l)
Nois
e(d
B(A
))1)
Air
ou
tlet
Wei
gh
t(k
g)
Dim
ensi
on
s (W
x D
x H
)
AM4-10 E1 180 H415463 10 460 400 4,0 180 62 G 3/4 ̋ 298,50 1200x800x1650
AM5-10 E1 180 H415563 10 630 400 5,5 180 65 G 3/4 ̋ 298,50 1200x800x1650
AM7-10 E1 180 H415663 10 935 400 7,5 180 67 G 3/4 ̋ 298,50 1200x800x1650
1) LpA1 sound pressure level according to DIN EN ISO 2151 and application of EN ISO 3744 2) Max. volume flow at service pressure in acc. with ISO 1217 (service pressure = pressure specification – 1 bar)
Screw compressors, stationaryThe screw compressor with the Easy-Service Concept
AirMaster compressors on tandem vessel with cold dryer
Tandem vessel, no technical inspection required
Common features Robust, V-belt driven screw-type
compressors with durable, compressor
blocks
Easy service concept: machine housing that
can be opened fully for the best possible
access to all components
The layout of all components (such as the
oil filter, air filter, oil vessel and external
microfilter) saves time and costs during
maintenance work
Simple handling and maximum operating
comfort thanks to easy-to-understand
electronic control system with 20-character
clear text display in 10 different languages
Maximum safety thanks to auxiliary control,
warning and safety systems
Integrated control of rotation direction
prevents expensive damage during operation
Small base that saves space
Simple assembly of outlet channel through
exhaust air guide directed upwards
Vessel with burned-in interior coating
15-year rust guarantee on all vessels
Does not require Technical Inspection
Authority certification because of type
approval test in accordance with Industrial
Safety Regulation § 17. No set-up inspection
or other repeat inspections. Testing by
a qualified expert is sufficient.
High-performance cold dryer with super dry
technology and ECO switch-off
Improved compressed air quality. The cold
dryer draws the unwanted condensation
water from the compressed air. Standard
features include a bypass line for dryer
maintenance.
Type Art. no.
Pre
ssu
re(b
ar)
Vo
lum
e fl
ow
(l/m
in)2
)
Vo
lta
ge
(V)
Dri
ve p
ow
er(k
W)
Tan
k v
ol.
(l)
No
ise
(dB
(A))
1)
Air
ou
tlet
Wei
gh
t(k
g)
Dim
ensi
on
s (W
x D
x H
)
AM4-10 E1 180 DK 600 H415464 10 460 400 4,0 180 62 G 3/4 ̋ 323,50 1200x800x1650
AM5-10 E1 180 DK 600 H415564 10 630 400 5,5 180 65 G 3/4 ̋ 323,50 1200x800x1650
AM7-10 E1 180 DK 985 H415664 10 935 400 7,5 180 67 G 3/4 ̋ 323,50 1200x800x1650
1) LpA1 sound pressure level according to DIN EN ISO 2151 and application of EN ISO 3744 2) Max. volume flow at service pressure in acc. with ISO 1217 (service pressure = pressure specification – 1 bar)
59
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
AirMaster compressors from 11 kW
Compressors for continuous operation
Common features Robust, V-belt driven screw-type compres-
sors with durable, compressor blocks
New electronic control with important
monitoring and control functions
Small base that saves space
Quiet due to soundproofed housing
Pressure sensor prevents start-up under load
Rotation direction check prevents costly
damage during operation
Adjustable run-on time control for individual
adaptation to the respective operation
conditions
Large multi-purpose cooler for oil and
compressed air
High-quality, robust electropneumatic suction
control
Easy to service and maintain due to remov-
able side panels and external filter cartridges
Load and operating hours counter for correct
service and maintenance intervals
Easy access to belt tensioner
Visual display for clogged suction filter
Visual display and automatic function for
shutting off the motor or the compressor
block if they overheat (oil), prevents costly
damage
High-quality glycerine pressure gauge for
displaying the operating pressure
Transparent rising pipe for easy oil level
checks
Exhaust air outlet directed upwards, wide
range of set-up locations therefore possible
Standard features include: star-delta switch
Type Art. no.
Pre
ssu
re(b
ar)
Volu
me
flow
(l/m
in)2
)
Volt
ag
e(V
)
Dri
ve p
ow
er(k
W)
Wei
gh
t(k
g)
Nois
e(d
B(A
))1)
Air
ou
tlet
Dim
ensi
on
s (W
x D
x H
)
AM11-8 E1 H411808 8 1650 400 11,0 200 64 3/4 ̋ i 960x740x1090
AM11-10 E1 H411810 10 1500 400 11,0 200 64 3/4 ̋ i 960x740x1090
AM11-13 E1 H411813 13 1150 400 11,0 200 64 3/4 ̋ i 960x740x1090
AM15-8 E1 H411908 8 2210 400 15,0 230 65 3/4 ̋ i 960x740x1090
AM15-10 E1 H411910 10 2000 400 15,0 230 65 3/4 ̋ i 960x740x1090
AM15-13 E1 H411913 13 1600 400 15,0 230 65 3/4 ̋ i 960x740x1090
AM 18-8 H417518 8 3000 400 18,5 280 74 1 ̋ i 960x740x1090
AM 18-10 H417520 10 2500 400 18,5 280 67 1 ̋ i 960x740x1090
AM 18-13 H417523 13 1930 400 18,5 340 74 1 ̋ i 960x740x1090
AM 22-8 H417618 8 3270 400 22,0 360 75 1 ̋ i 960x740x1090
AM 22-10 H417620 10 2950 400 22,0 360 75 1 ̋ i 960x740x1090
AM 22-13 H417623 13 2480 400 22,0 360 75 1 ̋ i 960x740x1090
1) LpA1 sound pressure level according to DIN EN ISO 2151 and application of EN ISO 3744 2) Max. volume flow at service pressure in acc. with ISO 1217 (service pressure = pressure specification – 1 bar)
Screw compressors, stationaryThe screw compressor with the Easy-Service Concept
60
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
AirMaster individual compressors
Also for lower air requirements
Common features Can also be set up in noise-sensitive rooms
thanks to extremely quiet running
The screw block with low compressor speeds
is specially developed for 2.2 and 3.0 kW.
This reduces wear and ensures a quiet,
pleasant running noise
Start-stop operation via pressure switch,
which results in substantial energy savings
compared to using star starting current
High operational reliability due to thermal
motor protection, oil temperature monitor
(max. 110°C) and operating hours counter
Perfectly suited for complementing existing
systems, e.g. to cover the compressed air
base load
All elements subject to regular maintenance
are easy to remove and refit
Type Art. no.
Pre
ssu
re(b
ar)
Volu
me
flow
(l/m
in)2
)
Dri
ve p
ow
er(k
W)
Wei
gh
t(k
g)
Nois
e(d
B(A
))1)
Air
ou
tlet
Dim
ensi
on
s (W
x D
x H
)
AM 2-10 H411420 10 290 2,2 93 60 1/2 ̋ i 690x570x890
AM 3-10 H411425 10 385 3 101 61 1/2 ̋ i 690x570x890
1) LpA1 sound pressure level according to DIN EN ISO 2151 and application of EN ISO 3744 2) Max. volume flow at service pressure in acc. with ISO 1217 (service pressure = pressure specification – 1 bar)
AirMaster individual compressors
With Variospeed energy-saving speed control
Common features Speed-controlled screw compressor with
continuously adjustable speeds to adapt
to the actual requirements (resulting from
the compressed air network). This avoids
expensive and inefficient after-run times
and achieves energy savings up to 35%.
The compressed air system attains higher
efficiency
Soft start from zero to full load. No starting
and switch-over peak loads as occur for
machines with star-delta switches. Expensive
current peak loads are avoided and mechan-
ical stress is reduced
An electronic monitoring function prevents
the motor from overloading, reduces wear
and extends the service life of the machine
The integrated emergency stop function
offers maximum safety
Clearly laid out, easily accessible operating
panel for easy handling and maximum
operating comfort. Operating elements are all
within easy reach, display elements easy to
read. Operational errors virtually excluded
The electronic control system (EasyTronic)
can be operated in 17 languages. Messages
appear in clear text (uncoded)
Manual control of the rotation direction of the
motor not required. The EasyTronic control
system selects the direction without starting
the compressor, thus preventing costly
damage during operation
No pressure losses due to compressed air
lines with small cross sections. Air outlet with
¾˝ connection as standard
Operating hour meter that measures load
and run-on times ensures that service and
maintenance is performed at the intervals
specified. An automatic message is displayed
when maintenance is required
The housing is lined with sound absorbing
mats that reduce the operating noise of the
compressor to a minimum. The special fan
and air guide in the housing make a signifi-
cant contribution to reducing noise levels
The electronically controlled fan and air
circulation system with new type of cooling
air duct regulate the operating temperatures
This extends the service life of the screw
compressor, even under extreme conditions,
because the oil temperature does not
fluctuate like with conventional thermostat
controls.
Type Art. no.
Pre
ssu
re(b
ar)
Vo
lum
e fl
ow
(l/m
in)2
)
Dri
ve p
ow
er(k
W)
Wei
gh
t(k
g)
No
ise
(dB
(A))
1)
Air
ou
tlet
Dim
ensi
on
s (W
x D
x H
)
AM 11-10 F2 VS H411410 10 660-1660 11 210 70 3/4 ̋ i 810x690x880
AM 15-10 F2 VS H411415 10 920-2050 15 225 72 3/4 ̋ i 810x690x880
1) LpA1 sound pressure level according to DIN EN ISO 2151 and application of EN ISO 3744 2) Max. volume flow at service pressure in acc. with ISO 1217 (service pressure = pressure specification – 1 bar)
Screw compressors, stationaryThe screw compressor for intensive operation
61
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
You will find all types of compressor accessories here, from basic changeover circuits
to start reliefs, safety valves and condensate drain valves.
Accessories for generating compressed airCompressor accessories
for every requirement
62
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
Compressed air vessel Vertical with fittings
Common features Standard features include: all fittings, such as
pressure gauge, safety valve and 2 ball valves
90 l vessel with plug nipple and quick release
coupling
Vessel with composite inner coating
Special outer coating
15-year rust guarantee on all vessels
Standard features include console for
retrofitting of a dryer (except BH-VZBA 90-11)
Connecting hose
With hand hole or corresponding viewing
window for assisting with maintenance and
technical inspections
We recommend connecting a condensate
discharger
Type Art. no.
Pre
ssu
re(b
ar)
Tan
k v
ol.
(l)
Wei
gh
t(k
g)
Air
ou
tlet
Dim
ensi
on
s (W
x D
x H
)
BH-VZBA 90-11 H110205 11 90 38 G1/2 ̋ 520x400x1230
BH-VZBA 270-11 H110404 11 270 95 R 3/4 ̋ i 780x850x1320
BH-VZBA 500-11 H110199 11 500 130 R 1 ̋ i 850x830x2030
BH-VZBA 270-16 H110407 16 270 125 R 3/4 ̋ i 850x830x1430
BH-VZBA 500-16 H110202 16 500 165 R 1 ̋ i 850x830x2040
Compressed air vessel Vertical without fittings
Common features Vessel with composite inner coating
Special outer coating
Includes all sleeves for attaching fittings,
inlets and outlets
With hand hole or corresponding viewing
window for assisting with maintenance and
technical inspections
We recommend connecting a condensate
discharger
Side connections for ball valve or elastic
connecting hoses
15-year rust guarantee on all vessels
Type Art. no.
Pre
ssu
re(b
ar)
Tan
k v
ol.
(l)
Coa
tin
g
Wei
gh
t(k
g)
Air
ou
tlet
Dim
ensi
on
s (W
x D
x H
)
BH-VZB 270-11 G502455 11 270 coated 88 R 3/4 ̋ 750x630x1300
BH-VZB 500-11 H110600 11 500 coated 120 R 1 ̋ 750x850x2020
BH-VZB 500-16 H110601 16 500 coated 175 R 1 ̋ 750x850x2020
Accessories for compressed air generation
63
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
Compressed air vessel Vertical without fittings
Common features Includes all sleeves for attaching fittings,
inlets and outlets
With hand hole or corresponding viewing
window for assisting with maintenance and
technical inspections
We recommend connecting a condensate
discharger
Side connections for ball valve or elastic
connecting hoses
15-year rust guarantee on all vessels
Type Art. no.
Pre
ssu
re(b
ar)
Tan
k v
ol.
(l)
Coa
tin
g
Wei
gh
t(k
g)
Dim
ensi
on
s (W
x D
x H
)
BH-VZ 750-11 H110333 11 750 galvanised 210 830x860x2060
BH-VZ 750-16 H110365 16 750 galvanised 265 830x860x2060
BH-VZ 1000-11 H110367 11 1000 galvanised 290 880x890x2360
BH-VZ 1000-16 H110369 16 1000 galvanised 330 880x890x2360
BH-VZ 2000-11 H110386 11 2000 galvanised 515 1160x1260x2450
BH-VZ 2000-16 H110388 16 2000 galvanised 600 1160x1260x2450
BH-VZ 3000-11 H110376 11 3000 galvanised 740 1250x1350x2690
BH-VZ 3000-16 H110377 16 3000 galvanised 810 1250x1350x2690
Compressed air vessel Horizontal, without fittings
Common features Vessel with composite inner coating
Special outer coating
Type Art. no.
Pre
ssu
re(b
ar)
Tan
k v
ol.
(l)
Coa
tin
g
Wei
gh
t(k
g)
Dim
ensi
on
s (W
x D
x H
)
BH-HB 20-11 G502145 10 20 coated 10,5 650x210x280
BH-HZB 50-11 G502316 11 50 coated 26,2 925x260x420
BH-HZB 90-11 G502448 10 90 coated 33,14 1030x340x490
BH-HZB 500-11 H110602 11 500 coated 135 1880x660x800
BH-HZB 500-16 H110603 16 500 coated 162,5 1880x660x800
Accessories for compressed air generation
64
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
Compressed air vessel Horizontal, without fittings
Type Art. no.P
ress
ure
(ba
r)
Tan
k v
ol.
(l)
Coa
tin
g
Wei
gh
t(k
g)
Dim
ensi
on
s (W
x D
x H
)
BH-HZ 750-11 H110375 11 750 galvanised 210 1880x750x880
BH-HZ 750-16 H110604 16 750 galvanised 265 1880x750x880
BH-HZ 1000-11 H111310 11 1000 galvanised 280 2150x800x930
BH-HZ 1000-16 H110605 16 1000 galvanised 330 2150x800x930
BH-HZ 2000-11 H110606 11 2000 galvanised 490 2170x1150x1280
BH-HZ 2000-16 H110607 16 2000 galvanised 600 2170x1150x1280
BH-HZ 3000-11 H110608 11 3000 galvanised 740 2490x1480x1380
BH-HZ 3000-16 H110609 16 3000 galvanised 810 2490x1480x1380
Sets of instruments For pressure vessel
Consists of: pressure gauge, safety valve,
test flange, ball valve, condensate discharge
including mini ball valve, various screw
connections and retaining elements
AMS-B-V: for vertical vessels
AMS-B-H: for horizontal vessels
Type Art. no.
Pre
ssu
re(b
ar)
Air
ou
tlet
AMS-B-V 500-11 B110089 11 2 x 1 ̋ i
AMS-B-H 500-11 B110102 11 2 x 1 ̋ i
AMS-B-V 750-11 B110093 11 2 x 1 ̋ i
AMS-B-H 750-11 B110092 11 2 x 1 ̋ i
AMS-B-V 1000-11 B110097 11 2 x 1 ̋ i
AMS-B-H 1000-11 B110096 11 2 x 1 ̋ i
AMS-B-V 2000-11 B110083 11 2 x 1 1/2 ̋ i
AMS-B-V 3000-11 B110100 11 2 x 1 1/2 ̋ i
AMS-B-V 500-16 B110091 16 2 x 1 ̋ i
AMS-B-H 500-16 B110103 16 2 x 1 ̋ i
AMS-B-V 750-16 B110095 16 2 x 1 ̋ i
AMS-B-H 750-16 B110094 16 2 x 1 ̋ i
AMS-B-V 1000-16 B110099 16 2 x 1 ̋ i
AMS-B-V 2000-16 B110081 16 2 x 1 1/2 ̋ i
Lubricants/oil OESYN Silent 1.0: for SilentMaster compressors SEM 30 and SEM 50 only
Type Art. no.
Ba
sis
Co
n-
tain
er
Co
m-
pre
sso
r ty
pe
Sta
rt-u
p
beh
av-
iou
r co
ld
Tem
per
-a
ture
-re
sist
-a
nce
Res
idu
e fo
rma
-ti
on
Lon
g
serv
ice
life
Wa
ter
sep
ara
-ti
on
OEMIN-Kolben-fahr 1,0 B111014 mineral 1,0 Piston + ++ + ++ +
OEMIN-Kolben-stat 3,0 B111002 mineral 3,0 Piston + ++ + ++ +
OEMIN-Schraub-stat 5,0 B111010 mineral 5,0 Screw ++ ++ + ++ +
OETSYN-Schraub-stat 1,0 B111013 partly synthetic 1,0 Screw +++ +++ +++ +++ ++
OETSYN-Schraub-stat 5,0 B111012 partly synthetic 5,0 Screw +++ +++ +++ +++ ++
OESYN-Silent 1,0 B770010 fully synthetic 1,0 Piston ++++ ++++ ++++ ++++ +++
OESYN-Kolben-stat 3,0 B111006 fully synthetic 3,0 Piston ++++ ++++ ++++ ++++ +++
Accessories for compressed air generation
65
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
Star-delta switch Type Art. no.
SDS 5,5 B111150
SDS 7,5 B111152
SDS 11 B111151
Ready to install (wired in full) star-delta or
smooth start-up combination
The integral motor protection prevents
the motor from overloading to avoid
damage
An integral low voltage circuit breaker
prevents the machine from starting
automatically after a power failure
Integrated solenoid-valve activation
makes the switch-off/start relief easier
to connect
Main switch with emergency stop function
Electrical connection 400 V/50 Hz
(three-phase current)
Protection category IP 54
With operating hours counter
The device corresponds to DIN EN 60204
Startup-load relief Type Art. no.
AE 4 B111055
Required for compressors with 4 kW
motor and star-delta switch
Basic load alternation control Type Art. no.
GLW-SGSD 17 B111201
Pressure sensor 0-16 bar
Display with 3 control buttons
Potential-free fault contact
Option of integrating a remote switch
Electrical connection 230 V/50 Hz
(alternating current)
For 2 piston compressors 3 / 4 kW
(without contactors)
Connection for electric ball valve and
energy-saving system
Scope of supply includes operating
hours counter but does not include
motor protection or startup-load relief
(please order AE 4 separately)
Accessories for compressed air generation
66
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
Basic load alternation control Type Art. no.
GLW 4 B111200
Electronic control of up to 4 compressors
for distribution of basic and additional air
requirements
Pressure sensor 0-16 bar
Text display
Display with 3 control buttons
Real-time clock
Time switch function with up to
6 programmes
Potential-free fault contact
Option of integrating a remote switch
Connection for electric ball valve and
energy-saving system
Electrical connection 230 V/50 Hz
(alternating current)
Screw-type and piston compressor can
be combined
For screw compressors/piston
compressors from 3.0 kW with contactors
Harmonisation of operating hours – saves
on maintenance costs
Pressure monitor with delayed activation
of the compressor
Operating hours counter Type Art. no.
BSZ B111073
Electrical connection 230 V/50 Hz
(alternating current)
Energy-saving system manual Type Art. no.
ESAR 3/4 M B111081
ESAR 1 M B111083
ESAR 1 1/4 M B111085
ESAR 1 1/2 M B111087
ESAR 2 M B111089
Shutting off the compressed air pipes
reduces energy costs
Improves operational safety and increases
the service life of components used
in compressed air conditioning by
preventing high flow speeds (e.g. after
depressurised phases)
Open slowly e.g. to fill the pipe without
generating pressure surges
Capable of performing simple control
tasks
Brass nickel-plated ball valve,
hard-chrome plated ball with Teflon
coating
230 V control boxes (switching
compressed air supply on and off)
With manual actuator and control lamp
Accessories for compressed air generation
67
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
Energy-saving system automatic Type Art. no.
ESAR 3/4 A B111082
ESAR 1 A B111084
ESAR 1 1/4 A B111086
ESAR 1 1/2 A B111088
ESAR 2 A B111090
Shutting off the compressed air pipes
reduces energy costs
Improves operational safety and increases
the service life of components used
in compressed air conditioning by
preventing high flow speeds (e.g. after
depressurised phases)
Open slowly e.g. to fill the pipe without
generating pressure surges
Capable of performing simple control
tasks
Brass nickel-plated ball valve, hard-
chrome plated ball with Teflon coating
230 V control boxes (switching
compressed air supply on and off)
For automatic operation via time switch
Connecting hoses Type Art. no.
VSL 1/2-800 B111070
VSL 1/2-1300 B111075
VSL 1/2-1800 B111066
VSL 3/4-800 B111071
VSL 3/4-1300 B111076
VSL 3/4-1800 B111067
VSL 1-800 B111069
VSL 1-1300 B111072
VSL 1-1800 B111068
VSL 1 1/4-1300 B111074
VSL 1 1/2-1300 B111078
Can be used in combination with
compressor vessels
Two connections with external thread
Elastic version
Pressure up to 16 bar
Rubber dampers With thread on one side
Type Art. no.
Dia
met
er(m
m)
Siz
e
GSE 40 L 1/4 B110059 40 M 8
GSE 70 L 1/4 B110060 70 M 12
GSE 100 L 1/4 B110061 100 M 12
GSE 100 S1 /3 B110063 100 M 12
Rubber dampers With thread on both sides
Type Art. no.
Dia
met
er(m
m)
Siz
e
GSE 40 L2 /4 B110064 40 M 8
GSE 75 L2 /4 B110062 75 M 12
GSE 100 L2 /4 B110066 100 M 12
GSE 100 S2 /3 B110067 100 M 12
Accessories for compressed air generation
68
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
Standard pressure gauge, horizontal
Casing made from high-quality ABS Face made from scratch-proof plexiglas
Type Art. no.
Dia
met
er(m
m)
Ma
ins
sup
ply
Mea
suri
ng
ra
ng
e(b
ar)
MM-W 40-6b E670040 40 1/8 ̋ 0-6
MM-W 40-10b E670014 40 1/8 ̋ 0-10
MM-W 40-16b E670017 40 1/8 ̋ 0-16
MM-W 50-6b E670018 50 1/8 ̋ 0-6
MM-W 50-10b E670001 50 1/8 ̋ 0-10
MM-W 50-16 G012038 50 1/8 ̋ 0-16
MM-W 50-6b E670020 50 1/4 ̋ 0-6
MM-W 50-10b E670021 50 1/4 ̋ 0-10
MM-W 50-16b E670002 50 1/4 ̋ 0-16
MM-W 50-25b E670003 50 1/4 ̋ 0-25
MM-W 63-6b E670025 63 1/4 ̋ 0-6
MM-W 63-10b E670026 63 1/4 ̋ 0-10
MM-W 63-16b E670006 63 1/4 ̋ 0-16
MM-W 63-25b E670007 63 1/4 ̋ 0-25
MM-W 80-16b E670010 80 1/4 ̋ 0-16
MM-W 80-25b E670011 80 1/4 ̋ 0-25
Standard pressure gauge, vertical
Casing made from high-quality ABS
Inspection glass made from scratch-proof
Plexiglas with dia. 50 and 63 mm
Steel housing and inspection glass with
dia. 40 and 100 mm
Type Art. no.
Dia
met
er(m
m)
Ma
ins
sup
ply
Mea
suri
ng
ra
ng
e(b
ar)
MM-S 40-6b E670028 40 1/8 ̋ 0-6
MM-S 40-10b G012060 40 1/8 ̋ 0-10
MM-S 40-16b E670029 40 1/8 ̋ 0-16
MM-S 50-6b E670030 50 1/4 ̋ 0-6
MM-S 50-10b E670031 50 1/4 ̋ 0-10
MM-S 50-16b E670004 50 1/4 ̋ 0-16
MM-S 50-25b E670005 50 1/4 ̋ 0-25
MM-S 63-6b E670032 63 1/4 ̋ 0-6
MM-S 63-10b E670033 63 1/4 ̋ 0-10
MM-S 63-16b E670008 63 1/4 ̋ 0-16
MM-S 63-25b E670009 63 1/4 ̋ 0-25
MM-S 80-16b E670012 80 1/4 ̋ 0-16
MM-S 80-25b E670013 80 1/4 ̋ 0-25
MM-S 100-6b E670102 100 1/2 ̋ 0-6
MM-S 100-10b E670103 100 1/2 ̋ 0-10
MM-S 100-16b E670104 100 1/2 ̋ 0-16
MM-S 100-25b E670105 100 1/2 ̋ 0-25
Pressure gauge for vesselType Art. no.
Dia
met
er(m
m)
Ma
ins
sup
ply
Mea
suri
ng
ra
ng
e(b
ar)
MM-S 100-16b E670100 100 1/2 ̋ 0-16
MM-S 100-25b E670101 100 1/2 ̋ 0-25
Accessories for compressed air generation
69
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
Ball valve standardType Art. no.
Nom
ina
l p
ress
ure
(ba
r)
KH-NI-16 G1i E050082 16
KH-NI-16 G1 1/4i E050083 16
KH-NI-16 G1 1/2i E050084 15
Ball valve AD With identification according to statutory
specifications
Type Art. no.
Nom
ina
l p
ress
ure
(ba
r)
KH-NI-40 G3/8i E050086 40
KH-NI-40 G1/2i E050087 40
KH-NI-40 G3/4i E050088 40
KH-NI-40 G1i E050089 30
KH-NI-25 G 1 1/4i G010015 25
KH-NI-40 G1 1/2i E050093 20
KH-NI-40 G2i E050094 20
Ball valve Type Art. no.
KH-NI-16 G1/2a x G1/2i E050110
KH-NI-16 G3/4a x G3/4i E050111
1 external, 1 internal thread
Nominal pressure 16 bar
Mini ball valve Type Art. no.
KH-20 G1/4i x G1/4a G012033
KH-G 3/8ixG 3/8a E043233
KH-G 3/8ixG 3/8i E043133
KH-20 G1/2i x G1/2a G470592
For installation upstream of the conden-
sate discharger. Allows maintenance work
to be performed during operation
Nominal pressure 15 bar
Safety valve Type Art. no.
SV-G1/4 8 bar G207010
SV-G1/4a-11C E700102
SV-G1/4a-16C E700103
SV-G3/8a-11C E700104
SV-G3/8a-16C E700105
SV-G1/2a-11C E700106
SV-G1/2a-16C E700107
CE-version, set at the factory and sealed
Accessories for compressed air generation
70
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
Safety valve Type Art. no.
SV-G1/2a-8 E700050
SV-G1/2a-11 E700051
SV-G1/2a-16 E700052
SV-G3/4a-8 E700053
SV-G3/4a-11 E700054
SV-G3/4a-16 E700055
SV-G1a-11 E700057
SV-G1a-16 E700058
Full stroke model
Condensate drain valve Type Art. no.
KAV-G1/4a E030050
KAV-G3/8a E030051
KAV-G1/2a E030058
Nickel-plated brass
O-ring seal on valve seat
With knurled screw
Check valve Type Art. no.
RV-G1/2i E770092
T-shape
Internal thread on both sides
Viton seal
Pressure up to 16 bar
Opening pressure 0.5 – 0.8 bar
Dirt pan Type Art. no.
SMF 2xG3/8i E072001
SMF 2xG1/2i E072002
Suitable for compressed air, water, non-
toxic gases, non-aggressive materials
Operating pressure 16 bar
2 internal threads
Double strainer insert made from chrome
nickel steel
Accessories Type Art. no.
Filter screen FS-SMF G3/8 B072001
Filter screen FS-SMF G1/2 B072002
Silencer Type Art. no.
SDP-SMK-G1/8a E024611
SDP-SMK-G1/4a E024612
SDP-SMK-G3/8a E024613
SDP-SMK-G1/2a E024614
SDP-SMK-G3/4a E024615
SDP-SMK-G1a E024616
Sintered metal, short
Noise reduction approx. 13 dB (A)
For assembly at air outlet of valves
Silencer Type Art. no.
SDP-SML-M5a E024620
SDP-SML-G1/8a E024621
SDP-SML-G1/4a E024622
SDP-SML-G3/8a E024623
SDP-SML-G1/2a E024624
SDP-SML-G3/4a E024625
SDP-SML-G1a E024626
Sintered metal, long
Noise reduction approx. 16 dB (A)
For assembly at air outlet of valves
Accessories for compressed air generation
71
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
Silencer Type Art. no.
SDP-SPEP-M5a E071110
SDP-SPEP-G1/8a E071111
SDP-SPEP-G1/4a E071112
SDP-SPEP-G3/8a E071113
SDP-SPEP-G1/2a E071114
SDP-SPEP-G3/4a E071115
Porous, sintered PE
Noise reduction approx. 20 – 25 dB (A)
Environmentally friendly, the oil mist
condenses because of the large
surface area
For assembly at air outlet of valves
Silencer Type Art. no.
SDP-SPE-G1/2a E072114
SDP-SPE-G3/4a E072115
SDP-SPE-G1a E072116
Sintered polythene
Noise reduction approx. 28 – 35 dB (A)
For assembly at air outlet of valves
Diaphragm pressure switch without motor protective relay
Differential gap with maximum switch-off
pressure up to specified value in bar
Type Art. no.
Pin
s(p
iece
(s))
Volt
ag
e(V
)
Ma
ins
sup
ply
Pre
ssu
re
ran
ge
on
(ba
r)
Pre
ssu
re
ran
ge
off
(ba
r)
Dif
fere
nti
al
ga
p(b
ar)
MDR 2-11 E270000 2 230 G 1/4 ̋ 2,8-9,2 4-13 3,5
MDR 2/11 SL F4 G004177 2 230 G 1/4 ̋ 2,8-9,2 4-13 3,5
MDR 4-16 E270001 2 230 G 1/4 ̋ 4-13 6-16 8
MDR 3-11 E270110 3 230/400 G 1/2 ̋ 3-9,1 4-11 5
MDR 3-16 E270111 3 230/400 G 1/2 ̋ 4-13 6-16 8
Diaphragm pressure switch with motor protective relay
With motor protection relay (with thermal
overcurrent trip)
With on/off switch, without relief valve,
3 additional connection options R 1/4 ̋
Differential gap with maximum switch-off
pressure up to specified value in bar
Type Art. no.
Nom
ina
l cu
rren
t ra
ng
e(A
)
Pre
ssu
re
ran
ge
on
(ba
r)
Pre
ssu
re
ran
ge
off
(ba
r)
Dif
fere
nti
al
ga
p(b
ar)
MDR 3-11-R 3/4 E270112 2,5-4,0 3-9,1 4-11 5
MDR 3-16-R3/4 E270113 2,5-4,0 4-13 6-16 8
MDR 3-11-R 3/6,3 E270114 4,0-6,3 3-9,1 4-11 5
MDR 3-16-R3/6,3 E270115 4,0-6,3 4-13 6-16 8
MDR 3-11-R3/10 E270116 6,3-10 3-9,1 4-11 5
MDR 3-16-R3/10 E270117 6,3-10 4-13 6-16 8
Relief valve Type Art. no.
ELV 2 E270020
ELV 4 E270019
ELV3W E270021
ELV3WS E270022
ELV 5 E270018
For attaching to pressure switch
Accessories for compressed air generation
72
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
Spare hood Type Art. no.
EH 2 B270019
EH 4 B270020
EH 3 B270031
EH 3 S B270032
EH 5 B270021
EH 5 S B270022
For pressure switch MDR 3
Spare hood Type Art. no.
EH 3SZ B271032
For pressure switch MDR 3
With operating hours counter
Accessories for compressed air generation
73
1 |
Ge
ne
rati
ng
co
mp
resse
d a
ir
1
2
4
3
Do you know what it feels like to hold a brand new, dynamic and powerful product in your
hands? A product characterised by an above-average service life that thrills you on account of
its enormous power and robustness?
We can help you experience this feeling.
Products from our compressed air generation, purifi cation, distribution and utilisation ranges are
characterised by outstanding quality and impressive power.
We are fully aware of these properties and therefore recommend combining the system power
supply of the four product areas – for effi cient working and perfect results.
Purifying compressed air
Distributing compressed air
Using compressed air
Generating compressed air
74
Purifying compressed
air
02
2 |
Pu
rify
ing
co
mp
ress
ed
air
Compressed air cold dryers | 80
Adsorption dryers | 84
Condensate dischargers | 86
Oil-water separators | 87
Maintenance units and filters | 88
Compressed air
of the highest quality
Benefit from the correct purification of compressed air
Proper purification ensures high quality of the compressed air, which extends the service life of
your compressed air tools and machines, saves high maintenance costs, preserves the health of
your staff and protects the environment.
On the following pages, we have presented a wide range of powerful and effective machines
for purifying compressed air. You can integrate these into your compressed air system
individually or in a combination.
Save money by investing in the correct equipment for purifying compressed air:
Extend the service life of compressed air tools
Prevent expensive damage to high-quality compressed air machines
Effective separation reduces costs for the disposal of condensate
Automatic discharge of condensate reduces the amount of maintenance required
on your compressed air system
High degree of availability of your compressed air system
Perfect working results minimise costs incurred for rework and keep your customers
satisfied
2 |
Pu
rify
ing
co
mp
ress
ed
air
76
p1 [bar] 3 4 5 6 7 8 9 10 11 12 14 16
(f1) 0,75 0,85 0,90 0,95 1,00 1,04 1,07 1,10 1,12 1,14 1,18 1,20
t1 [°C] 30 35 40 45 50
(f2) 1,25 1,00 0,85 0,75 0,60
tc [°C] 25 30 35 40 45
(f3) 1,00 0,96 0,92 0,88 0,80
p1 [bar] 1 2 3 4 5 6 7 8 9 10 12 16
(f) 0,138 0,53 0,65 0,76 0,84 0,92 1,00 1,07 1,13 1,19 1,31 2,13
tdp [°C] 3 5 7 9 10
(f4) ECO 1 1,2 1,35 1,45
(f4) VIA /PT 1 1,12 1,24 1,35
Design data for compressed air cold dryers
The performance specifications of our compressed air cold dryers are based on an operating pressure of 7 bar, an air inlet
temperature of 35 °C and an ambient temperature of 25 °C. For other pressures or temperatures, please refer to the factors (f) that
correspond to your values in the tables below.
With other operating pressures p1, multiply the flow volume by factor (f1):
With other compressed air inlet temperatures t1, multiply the flow volume by factor (f2):
With other cooling medium temperatures tc, multiply the flow volume by factor (f3):
For other pressure dew points tpd, multiply the flow volume by factor (f4):
Correction factors for compressed air filters
With other operating pressures (p1), multiply the flow volume of the filter by factor f:
Conversion factor for operating pressure/compressed air inlet temperature for adsorption dryers
Operating pressure 35 °C 40 °C 45 °C 50 °C
5 bar 0,75 0,64 0,61 0,59
6 bar 0,89 0,78 0,73 0,67
7 bar 1,00 0,91 0,82 0,79
8 bar 1,08 1,00 0,94 0,86
9 bar 1,26 1,08 1,03 0,99
10 bar 1,31 1,16 1,07 1,03
11 bar 1,36 1,24 1,10 1,07
12 bar 1,49 1,36 1,23 1,18
13 bar 1,62 1,47 1,35 1,29
14 bar 1,71 1,57 1,46 1,38
15 bar 1,79 1,67 1,57 1,46
16 bar 1,90 1,77 1,66 1,55
Design data for
compressed air dryers and filters
2 |
Pu
rify
ing
co
mp
ress
ed
air
77
Compressed air quality classes as per DIN ISO 8573
Compressed air qualitiesContamination of the
compressed air by
Conforms to the following quality classes in accordance
with DIN ISO 8573-1
Coarse
dirt
Fine
dirtOil Condensate Particles Water Oil
Not purified 5 7 5
Purified of coarse dirt
Conditionally recommended4 7 4
Purified of fine dirt
Conditionally recommended1 7 2
Purified of fine dirt and oil
Not recommended1 7 1
Purified of coarse dirt and condensate
For using tools
For machines with their own filtration
4 4 4
Purified of fine dirt and condensate
For using tools
For painting
For machines that require these quality classes
1 4 2
Purification of fine dirt, condensate and oil
For high-quality paints
For machines that require these quality classes
1 4 1
Purification of fine dirt and condensate
For outdoor lines
For machines that require these quality classes
1 2 2
Purification of fine dirt, condensate and oil
For machines that require these quality classes1 2 1
ClassParticles (dirt) Water (condensate) Oil
Particle size in μm (max.)
Particle density in mg/m³ (max.)
Pressure dew point in °C
Water content in g/m³
Residual oil contentin mg/m³
0 <0.1 <0.1 < -70°C <0.003 <0.01
1 0.1 0.1 -70°C 0.003 0.01
2 1 1 -40°C 0.11 0.1
3 5 5 -20°C 0.88 1
4 15 8 +3°C 6 5
5 40 10 +7°C 7.8 25
6 >40 >10 +10°C 9.4 > 25
7 – – > +10°C > 9.4 –
Compressed air purification
made to measure
2 |
Pu
rify
ing
co
mp
ress
ed
air
78
Notes about compressed air qualityRequired Schneider airsystems products
to attain the compressed air quality
Compressor
Cyclone
separator
(1)
Vessel PrefilterCompressed
air cold dryer
Adsorption
dryerMicrofilter
Activated
carbon
filters
Aggressive condensate (environmentally harmful)
Short service life of connected consumers
Aggressive condensate (environmentally harmful)
Short service life of connected consumers
Aggressive condensate (environmentally harmful)
Very short service life of the filter element
Short service life of connected consumers
Aggressive condensate (environmentally harmful)
Very short service life of the filter element
Short service life of connected consumers
Short service life of machine filters
Pipeline and connected consumers are
contaminated by fine dirt and oil
Compressed air only used as a
direct working medium to a limited extent
Optimal protection of connected
consumers
Compressed air used as direct working
medium
No freezing of outdoor lines
Compressed air used as direct working
medium
(1) Recommendation for protecting the vessel, prefilter and compressed air cold dryer
2 |
Pu
rify
ing
co
mp
ress
ed
air
79
Compressed air cold dryers supply dry and clean compressed air for standard and
complex requirements. The dryers are exceptionally powerful and reliable due to the
high-quality components and keep pressure losses to a minimum.
Compressed air cold dryersRobust compressed air cold dryers
for durable compressed air systems and tools
2 |
Pu
rify
ing
co
mp
ress
ed
air
80
Energy-savingeven when used sporadically
due to ECO switch-off function
Super dry technology for best operating safety of production systems through continuous
operation with stable dew point
Ideal protection of compressed air line against corrosion through
reheating of dried compressed air
Reliable continuous operation also for demanding
applications in accordance with
ISO 8573 Class 4
Technical features:
Adherence to strict requirements of tool and
CNC machines or for high-quality paint work
ECO switch-off function saves on operating co-
sts – significant savings can be made depending
on the size of the dryer and the nature of the ap-
plication
Maximum function stability for varied operating
conditions – also for temporary overload
Maintenance-friendly and energy-efficient thanks to the best available condensate discharge
technology
Cost savingsin standard applications according
to ISO 8573 Class 5 through gene-
rous component design and ECO
control system
Extremely low maintenanceself-cleaning vertical
arrangement of rust-free heat
transfer areas reduces dirt
quantities
Space-saving installationoptional wall or vessel
mounting
Consistently reliable condensate dischargedue to electronic discharger
Energy-saving, efficient, reliable –
the ECO cold dryer
2 |
Pu
rify
ing
co
mp
ress
ed
air
81
2 |
Pu
rify
ing
co
mp
ress
ed
air
Compressed air cold dryer ECO Super-dry technology for maximum operational reliability
Common features Suitable for continuous applications for
dependable protection of valuable machines
and control systems, designed for a 3 °C
pressure dew point (Class 4 according to
ISO 8573)
Suitable for energy-saving, sporadic and
continuous applications for protecting air
consumers (e.g. tools), designed for a 7 °C
pressure dew point (Class 5 according to
DIN ISO 8573)
Energy-saving function ECO: Fan and cold
compressor switch off if air is not drawn
from the unit for a certain time. Makes
energy-saving dryer operation possible
Heat exchangers with large flow cross-
sections ensure consistently high air quality
and constantly low pressure losses over
the entire operating time
Efficient heat transfer
– Precooled by cold air flow
– Excellent coolant distribution for efficient
cooling
– Large surfaces
Benefits:
– Energy savings
Vertical attachment of heat exchanger
– Direct air guide
– Cleaned automatically by discharged
condensate
– Optimal condensate discharge
Benefits:
– Minimal pressure losses, low operating
costs
– No contamination, no increase in pressure
loss
– Condensate collected at lowest point
Condensate separator
– optimised flow rate for easy droplet
formation
– droplet forming heat exchanger surface
– condensate collection in cold area of dryer
Benefits:
– optimum degree of filtration
– prevention of re-evaporation of the
condensate into the compressed air
Efficient, economical discharge without no
pressure losses due to automatic condensate
discharger
Generous connection dimensions adapted
to the flow rate
Indicator for monitoring the pressure dew
point
Extremely simple assembly of wall-hung units
DK 5000/7100/10000 ECO: upright unit
Type Art. no.
Volu
me
flow
1) a
t p
ress
ure
d
ew p
oin
t +
3 °
C(l
/min
)
Volu
me
flow
1) a
t p
ress
ure
d
ew p
oin
t +
7 °
C(l
/min
)
Pow
er in
pu
t(k
W)
Pre
ssu
re
loss
(ba
r)
Wei
gh
t(k
g)
Air
ou
tlet
Dim
ensi
on
s (W
x D
x H
)
DK 600 ECO H612075 600 810 0,15 0,2 24 G 3/4 ̋ i 325x263x745
DK 985 ECO H612114 985 1330 0,23 0,25 25 G 3/4 ̋ i 325x263x745
DK 1500 ECO H612162 1500 2025 0,26 0,25 27 G 3/4 ̋ i 325x263x745
DK 2200 ECO H612222 2200 2970 0,26 0,16 34 G 1 1/2 ̋ i 410x415x845
DK 3500 ECO H612360 3500 4725 0,45 0,28 38 G 1 1/2 ̋ i 410x415x845
DK 5000 ECO H612540 5000 6750 1,00 0,21 111 G 1 1/2 ̋ i 670x550x844
DK 7100 ECO H612720 7100 9585 1,30 0,22 170 G 2 ̋ i 670x550x844
DK 10000 ECO H612105 10000 13500 1,80 0,23 195 G 2 ̋ i 752x695x1100
1) Flow rate in acc. with ISO 7183, compressed air temperature 35 °C, ambient temperature 25 °C, inlet pressure at cold dryer 7 bar (high pressure). Compressed air inlet temperature max. 50 °C, operating pressure max. 16 bar (high pressure).
Accessories Type Art. no.
Bypass line UGL 3/4 B110172
Bypass line UGL 1 1/2 B110175
Bypass line UGL 2 B110178
Mounting kit Type Art. no.
ABZ-DK ECO 1 B612000
Can be retrofitted to stationary piston
compressors (UniMaster STS) on 270 or
500 l vessel
Compressed air cold dryer ECOHigh-performance cold dryer with super dry technology and ECO switch-off
82
2 |
Pu
rify
ing
co
mp
ress
ed
air
Compressed air cold dryer “Vertical” PT series
Common features ESA control system
– Incorporates precision sensors that
guarantee optimised, dynamic adjustment
to the relevant performance requirements,
fan and compressor activated independ-
ently of one another
– Allows energy-saving operation and
consistent, high-qual
Stainless steel heat exchanger
– No corrosion
– Permanently smooth surfaces
Benefits:
– Long service life
– Consistently high air quality
– No future increase in pressure loss
Efficient heat transfer
– Precooled by cold air flow
– Excellent coolant distribution for efficient
cooling
– Large surfaces
Benefits:
– Energy savings
Vertical attachment of heat exchanger
– Direct air guide
– Cleaned automatically by discharged
condensate
– Optimal condensate discharge
Benefits:
– Minimal pressure losses, low operating
costs
– No contamination, no increase in pressure
loss
– Condensate collected at lowest point
Condensate separation
– Optimal flow speed for easy droplet
formation
– Plate profile encourages bead formation
Benefits:
– Maximum degree of separation guaranteed
Efficient, economical discharge without no
pressure losses due to automatic condensate
discharger
Heating compressed air
– Outgoing air flow cools the incoming air
Benefits:
– Energy-saving
Clear layout, easy to operate, ergonomic and
user-friendly
Generous connection dimensions adapted to
the flow rate
Floor-mounted machine with compact overall
dimensions
Electrical connection 230 V/50 Hz (alternating
current)
For continuous use and protecting high-
quality machines and control systems
Available while stocks last
Type Art. no.
Vo
lum
e fl
ow
1) a
t p
ress
ure
d
ew p
oin
t +
3 °
C(l
/min
)
Vo
lum
e fl
ow
1) a
t p
ress
ure
d
ew p
oin
t +
7 °
C(l
/min
)
Po
wer
in
pu
t(k
W)
Pre
ssu
re
loss
(ba
r)
Wei
gh
t(k
g)
Air
ou
tlet
Dim
ensi
on
s (W
x D
x H
)
DK 14700 PT H607147 14700 18230 2,1 0,12 288 G 2 ̋ i 800x670x1350
1) Flow rate in acc. with ISO 7183, compressed air temperature 35 °C, ambient temperature 25 °C, inlet pressure at cold dryer 7 bar (high pressure). Compressed air inlet temperature max. 50 °C, operating pressure max. 16 bar (high pressure).
Accessories Type Art. no.
Bypass line UGL 3/4 B110172
Bypass line UGL 1 1/2 B110175
Bypass line UGL 2 B110178
Compressed air cold dryerDry and clean compressed air for normal requirements
83
The adsorption dryers satisfy even the most demanding requirements for air quality,
are therefore suitable for high-quality machines and systems, and make sure that your
production processes are both reliable and economical.
Adsorption dryersDryers for
demanding requirements
2 |
Pu
rify
ing
co
mp
ress
ed
air
84
2 |
Pu
rify
ing
co
mp
ress
ed
air
Adsorption dryer “Vertical” DAT series
Common features 10 years continuous operation: Vessel with
drawn aluminium profile as per PEDMinimum
load cycle 1,000,000 at ºp 15 bar
5.6 % energy saved:
Pressure changes only 12 times an hour for
max. regeneration air requirements of 14.3 %
Longer service life: Collecting chamber within
the moist zone protects the drying agent from
concentrated moisture
High degree of process security: Highly active
molecular screen ensures stable pressure
dew point of -40°C
Stability in all operating situations:
Valve bank with directly controlled main and
blow valves. Clear defined valve positions
Regeneration unit:
Passive presetting of regeneration air
Pressure dew point can be preset:
Microprocessor control system in clearly laid
out,easily accessible housing
All elements within view at all times: LED
function displays on the front of the switch
cabinet for: power, adsorption, regeneration
and economy cycle
Operating costs reduced in direct proportion
to the partial load:
Dew point-dependent control system with
digital display and floating output
Drying agent with extended useful life:
Prefilter at intake point for filtering solids and
aerosols up to 0.01 mg/m³ incl. automatic
discharger
Compressed air free of particles:
Downstream filter at the outlet for filtering
particles in the drying agent incl. manual
drain valve
Standard features include prefilter and
downstream filter
Type Art. no.
Volu
me
flow
1)
(l/m
in)
Wei
gh
t(k
g)
Air
ou
tlet
Dim
ensi
on
s (W
x D
x H
)
DRY-DAT 120 H604012 133 9 1/4 ̋ i 312x210x390
DRY-DAT 230 H604023 250 13 1/4 ̋ i 312x210x565
DRY-DAT 350 H604035 416 17 1/4 ̋ i 359x210x815
DRY-DAT 580 H604058 583 24 1/4 ̋ i 359x210x1085
DRY-DAT 850 H604085 933 52 3/8 ̋ i 436x300x1160
DRY-DAT 1200 H604120 1200 65 3/8 ̋ i 436x300x1410
DRY-DAT 1400 H604140 1433 77 1/2 ̋ i 436x300x1610
1) Compressed air inlet temperature 35°C, ambient temperature 20°C, operating pressure 7 bar. Compressed air inlet temperature max. 50°C/min. 5°C, operating pressure max. 16 bar/ min. 5 bar
“Cooling” adsorption dryerDry and clean compressed air for special requirements
85
Condensate dischargersEnergy saving
and reliable
Condensate dischargers automatically drain the condensate from vessels, filters and
compressed air dryers while maintaining even the highest pressures at a constant level
(up to 16 bar). The dischargers are extremely low-maintenance due to the electronic
level measurement function.2 |
Pu
rify
ing
co
mp
ress
ed
air
Condensate collection pipe Condensate collection pipe discharges the
compressed air condensate to the oil-water
separator
Compressed air devices (such as
compressed air vessels, cold dryers or filters)
can be connected
Type Art. no.
Co
nd
en-
sate
in
lets
(pie
ce(s
))
KSL 2 B605062 2
KSL 3 B605063 3
KSL 4 B605061 4
Ecomat Automatic condensate drainage
Electrical connection 230 V/50 Hz (alternating
current)
Ready to install with 2.5 m connection cable
and plug
Simple installation
For operating pressures up to 16 bar
No compressed air loss
Compact design
Type Art. no.
For
suct
ion
ca
pa
city
(l/m
in)
Wei
gh
t(k
g)
Com
-p
ress
ed-
air
su
pp
ly
Dim
en-
sion
s
(W x
D x
H)
KAL-Ecomat 3100 D605023 2500 0,80 G1/2 ̋ i 149x65x118
KAL-Ecomat 4500 D605025 6300 0,85 G 1/2 ̋ i 150x65x141
KAL-Ecomat 20000 D605030 28000 2,0 G 1/2 ̋ i 212x93x162
Mounting kit For Ecomat condensate discharger on
pressure vessels, cold dryers and filters
Type Art. no.
Ad
ap
ted
fo
r
ABZ-Eco 3000 B B605082 Pressure vessel 90 l horizontal manufactured from 1997
ABZ-Eco 3000 BST B605086 UniMaster STA, 10+Master STA
ABZ-Eco 3000 AM B605085 AirMaster compressors on vessel
ABZ-Eco 3000 F B605084 Filter DFP 6 to DFP 160 and DVP 6 to DVP 160
ABZ-Eco 4500 B B605080 all pressure vessels (except 90 l horizontal) and all pressure vessels vertikal without pressure line
86
Oil-water separatorsFor the environmentally friendly
purification of condensate
Oil-water separators use an automatic separation process and multiple-stage cleaning process
to purify condensate containing oil. These environmentally friendly, cost-saving machines
separate water from the condensate, which can then be discharged into the sewage system as
specified in §7a of the Water Resources Act. 2 |
Pu
rify
ing
co
mp
ress
ed
air
Oil-water separator, ÖwamatType Art. no.
For
suct
ion
ca
pa
city
(l/m
in)1
)
Wei
gh
t(k
g)
Dim
ensi
on
s (W
x D
x H
)
OWS-ÖWAMAT 10 H601001 2400/1700 3,5 290x222x528
OWS-ÖWAMAT 11 H601002 4900/3400 5,8 387x260x595
1) Screw/piston compressors
Oil-water separator, ÖwamatType Art. no.
For
suct
ion
ca
pa
city
(l/m
in)1
)
Wei
gh
t(k
g)
Dim
ensi
on
s (W
x D
x H
)
OWS-ÖWAMAT 12 H601003 7300/5100 12,0 350x397x719
OWS-ÖWAMAT 14 H601004 14600/10100 16,0 410x461x892
1) Screw/piston compressors
Activated carbon refill pack for Öwamat Type Art. no.
FE-Öwamat 10 B201023
FE-Öwamat 11 B201024
FE-Öwamat 12 B201025
FE-Öwamat 14 B201026
Incl. prefilter
According to the law, a spare filter must
be kept in reserve if an Öwamat is used
Accessories Type Art. no.
Activated carbon refill pack AKP 10/40 Öwatec B201013
Activated carbon refill pack AKP 130 Öwatec B201014
Activated carbon refill pack AKP 175 Öwatec B201019
87
Our filters and maintenance devices achieve the highest quality compressed air –
prefilters, microfilters and activated carbon filters produce purified compressed air
that is especially suitable for spraying applications.
Maintenance units, filtersPerfect air quality
for your applications
2 |
Pu
rify
ing
co
mp
ress
ed
air
88
2 |
Pu
rify
ing
co
mp
ress
ed
air
Preliminary filter For separating condensate and solid con-
taminants with particles up to 15 μm when
used upstream of a compressed air dryer.
Compressed air quality as per ISO 8573.1
Standard features include: VP filter element
and automatic condensate discharger with
float valve
Used upstream of a compressed air dryer
Particle size, class 4: ≤15 μm
Particle density, class 3: ≤5 mg/m³
Residual oil content, class 4: ≤5 mg/m³
Type Art. no.
Volu
me
flow
(l/m
in)1
)
Com
pre
ssed
-a
ir s
up
ply
Wei
gh
t(k
g)
Dim
ensi
on
s(m
m)
VF-DVP 6 D640700 700 R 3/8 ̋ i 0,6 200x70
VF-DVP 10 D640701 1300 R 1/2 ̋ i 1,1 240x105
VF-DVP 15 D640702 1900 R 1/2 ̋ i 1,2 295x105
VF-DVP 30 D640703 3000 R 3/4 ̋ i 2 300x125
VF-DVP 45 D640704 5200 R 1 ̋ i 2,4 420x125
VF-DVP 80 D640706 8500 R 1 1/2 ̋ i 3,2 452x125
1) Air volume flow in acc. with ISO 7183 (7 bar input pressure), 35 °C air inlet temperature)
Accessories for prefilters Type Art. no.
F-VP 6 B640700
F-VP 10 B640701
F-VP 15 B640702
F-VP 30 B640703
F-VP 45 B640704
F-VP 80 B640706
Replacement filter element
Micro filter For separating extremely fine oil and water
aerosols and solid contaminants with
particles up to 0.01 μm
Standard features include: FP filter element
and automatic condensate discharger with
float valve
Compressed air quality in combination with
a prefilter and compressed air dryer only
Particle size, class 1: ≤0.1 μm
Particle density, class 1: ≤0.1 mg/m³
Residual oil content, class 1: ≤0.01 mg/m³
Type Art. no.
Volu
me
flow
(l/m
in)1
)
Com
pre
ssed
-a
ir s
up
ply
Wei
gh
t(k
g)
Dim
ensi
on
s(m
m)
FF-DFP 6 D640710 700 R 3/8 ̋ i 0,6 200x70
FF-DFP 10 D640711 1300 R 1/2 ̋ i 1,1 240x105
FF-DFP 15 D640712 1900 R 1/2 ̋ i 1,2 295x105
FF-DFP 30 D640713 3000 R 3/4 ̋ i 2,0 300x125
FF-DFP 45 D640714 5200 R 1 ̋ i 2,4 420x125
FF-DFP 80 D640716 8500 R 1 1/2 ̋ i 3,2 452x125
1) Air volume flow in acc. with ISO 7183 (7 bar input pressure), 35 °C air inlet temperature)
Accessories for microfilters Type Art. no.
F-FP 6 B640710
F-FP 10 B640711
F-FP 15 B640712
F-FP 30 B640713
F-FP 45 B640714
F-FP 80 B640716
Replacement filter element
Filter
89
2 |
Pu
rify
ing
co
mp
ress
ed
air
Differential pressure gauge Type Art. no.
MM-DDM-F B640503
Differential pressure manometer for the
prefilter and microfilter (6-45) available
as an optional extra. Provides information
on whether the filter element is fully
functional or needs replacing
Activated carbon filters With FP filter element
For separating oil vapours, aroma and
flavouring additives
Compressed air quality and use in combina-
tion with a series-connected microfilter only
Residual oil content, class 1: ≤0.008 mg/m³
Type Art. no.
Volu
me
flow
(l/m
in)1
)
Com
pre
ssed
-a
ir s
up
ply
Wei
gh
t(k
g)
Dim
ensi
on
s(m
m)
AF-DAP 6 D640720 700 R 3/8 ̋ i 0,6 200x70
AF-DAP 10 D640721 1300 R 1/2 ̋ i 1,1 240x105
AF-DAP 15 D640722 1900 R 1/2 ̋ i 1,2 295x105
AF-DAP 30 D640723 3000 R 3/4 ̋ i 2,0 300x125
AF-DAP 45 D640724 5200 R 1 ̋ i 2,4 420x125
AF-DAP 80 D640726 8500 R 1 1/2 ̋ i 3,2 452x125
1) Air volume flow in acc. with ISO 7183 (7 bar input pressure, 35 °C air inlet temperature)
Accessories for activated carbon filters Type Art. no.
F-AP 6 B640720
F-AP 10 B640721
F-AP 15 B640722
F-AP 30 B640723
F-AP 45 B640724
F-AP 80 B640726
Replacement filter element
Cyclone separator Including condensate discharger with
integrated float valve
For discharging condensate between the
compressor and vessel
Type Art. no.
Volu
me
flow
(l/m
in)1
)
Dim
ensi
on
s(m
m)
Wei
gh
t(k
g)
Air
ou
tlet
ZA 5500 D640055 5500 367 x 109 2,2 R 1 ̋ i
1) Air volume flow in acc. with ISO 7183 (7 bar input pressure, 35 °C air inlet temperature)
Angular bracket Type Art. no.
WKB-F-G3/8 B640399
WKB-F-G1/2 B640400
WKB-F-G3/4 B640401
WKB-F-G1 B640402
WKB-F-G1 1/2 B640404
For mounting the complete filter DVP, DFP,
DAP and filter combinations to the wall.
Filter
Double nipple Type Art. no.
DNL-MS-R3/8a x R3/8a E030054
DNL-MS-R1/2a x R1/2a E030055
DNL-MS-R3/4a x R3/4a E030056
DNL-MS-R1a x R1a E030057
DNL-R1 1/2a x R1 1/2a G004123
For connecting several complete filters to
create a combination of filters
90
2 |
Pu
rify
ing
co
mp
ress
ed
air
Maintenance units Robust maintenance units with metal housing for an air-flow volume of up to 3000 l/min.
Common features High flow volumes with low pressure drop reduce the energy costs
Flexible installation thanks to modular principle; assembly possible
on right or left
High control accuracy
Maintenance-free operation
Admission pressure max. 18 bar
Free of silicone
Lockable adjusting button for pressure reducer and filter pressure
reducer
Pressure reducer
Pressure reducer 1/4˝
Bleed function for quick, precise regulation
Pressure regulator with piston for high
operational reliability
High secondary pressure stability (adjusting
pressure), even if the input pressure or the
flow rate changes
Locking control knob
Installation independent of flow direction
because pressure gauge can be connected
on both sides
Regulation range 0-12 bar
Standard features include: pressure gauge
For installation in machines or mounting on
walls. Can be integrated in control panels
Flow charts: Measurement carried out at
admission pressure of 8 bar. The set pressure
can be read at the far left (2, 4 and 6 bar).
Example: pressure reducer 1/4˝: set value 6 bar.
At 700 l/min., 5 bar is available after the pressure
reducer.
Pressure reducer 3/8 ̋ – 1/2 ̋ Pressure reducer 3/4 ̋ – 1 ̋
Type Art. no.
Con
-n
ecti
ng
th
rea
d
Dim
en-
sion
A(m
m)
Dim
en-
sion
B(m
m)
Dim
en-
sion
C(m
m)
Dim
en-
sion
D(m
m)
Dim
en-
sion
E(m
m)
Con
nec
-ti
on
for
pre
ssu
re
ga
ug
e
DM 1/4 W D202002 G 1/4 ̋ i 42 94 42 42 32 G 1/8 ̋ i
DM 3/8 W D302002 G 3/8 ̋ i 60 130 60 60 46 G 1/8 ̋ i
DM 1/2 W D402002 G 1/2 ̋ i 60 130 60 60 46 G 1/8 ̋ i
DM 3/4 W D502002 G 3/4 ̋ i 80 184 80 80 66 G 1/4 ̋ i
DM 1 W D602002 G 1 ̋ i 80 184 80 80 66 G 1/4 ̋ i
Maintenance units
91
2 |
Pu
rify
ing
co
mp
ress
ed
air
Filter pressure reducer
Filter pressure reducer 1/4 ̋
Combines the technical benefits of the
pressure reducer and the water separator
in one compact unit
Semi-automatic drainage
Pressure gauge connector G 1/8 ̋i
Regulation range 0-12 bar
Standard features include: pressure gauge
and 20 μm filter element
For installation in machines or mounting on
walls
Flow charts: Measurement carried out at
admission pressure of 8 bar. The set pressure
can be read at the far left (2, 4 and 6 bar).
Example: filter pressure reducer 1/4 ̋: set value
6 bar. At 700 l/min., 5 bar is available after the
controller.
Filter pressure reducer 3/8 ̋ – 1/2 ̋ Filter pressure reducer 3/4 ̋ – 1 ̋
Type Art. no.
Con
-n
ecti
ng
th
rea
d
Dim
en-
sion
A(m
m)
Dim
en-
sion
B(m
m)
Dim
en-
sion
C(m
m)
Dim
en-
sion
D(m
m)
Dim
en-
sion
E(m
m)
Con
d.
vess
el
volu
me
(cm
³)
FDM 1/4 W D225026 G 1/4 ̋ i 42 190 42 42 36 10
FDM 3/8 W D325026 G 3/8 ̋ i 60 245 60 60 52 45
FDM 1/2 W D425026 G 1/2 ̋ i 60 245 60 60 52 45
FDM 3/4 W D458305 G 3/4 ̋ i 80 332 80 80 66 170
FDM 1 W D468305 G 1 ̋ i 80 332 80 80 66 170
Water separator with filter
Filter 1/4 ̋
Centrifugal acceleration of compressed air
for efficient separation of dirt particles and
condensate
Two-stage mechanical filter with 20 μm
Filtering function upstream of the pressure
reducer
Low pressure losses
Semi-automatic drainage
Flow charts: Measurement carried out at different
admission pressures: A = 2 bar; B = 4 bar;
C = 6 bar, D = 8 bar; E = 10 bar. The pressure
drop is shown in bar. Example: filter 1/4 ̋: at an
admission pressure of 8 bar (=D) and a pressure
drop of 0.35 bar, the maximum flow rate is
1250 l/min.
Filter 3/8 ̋ – 1/2 ̋ Filter 3/4 ̋ – 1 ̋
Type Art. no.
Co
n-
nec
tin
g
thre
ad
Dim
en-
sio
n A
(mm
)
Dim
en-
sio
n B
(mm
)
Dim
en-
sio
n C
(mm
)
Dim
en-
sio
n D
(mm
)
Dim
en-
sio
n E
(mm
)
Co
nd
. ve
ssel
vo
lum
e(c
m³)
FWA 1/4 W D221002 G 1/4 ̋ i 42 142 42 42 32 10
FWA 3/8 W D321002 G 3/8 ̋ i 60 180 60 60 46 45
FWA 1/2 W D421002 G 1/2 ̋ i 60 180 60 60 46 45
FWA 3/4 W D521002 G 3/4 ̋ i 80 235 80 80 66 170
FWA 1 W D621002 G 1 ̋ i 80 235 80 80 66 170
Maintenance units
92
2 |
Pu
rify
ing
co
mp
ress
ed
air
Mist oiler
Lubricator 1/4 ̋
Fine adjustment for a regular oil supply
Proportional adjustment of the oil supply to
the air flow rate for optimal lubrication, even
at low pressures and low air flow rates
Oil purification downstream of the filter
pressure reducer
Can be integrated anywhere due to compact
dimensions
Flow charts: Measurement carried out at different
admission pressures: A = 2 bar; B = 4 bar;
C = 6 bar, D = 8 bar; E = 10 bar. The pressure
drop is shown in bar. Example: mist oiler 1/4 ̋:
at an admission pressure of 8 bar (=D) and
a pressure drop of 0.4 bar, the maximum flow
rate is 800 l/min.
Lubricator 3/8 ̋ – 1/2 ̋ Lubricator 3/4 ̋ – 1 ̋
Type Art. no.
Con
-n
ecti
ng
th
rea
d
Dim
en-
sion
A(m
m)
Dim
en-
sion
B(m
m)
Dim
en-
sion
C(m
m)
Dim
en-
sion
D(m
m)
Dim
en-
sion
E(m
m)
Oil
rese
rvoir
vo
lum
e(c
m³)
N 1/4 W D223001 G 1/4 ̋ i 42 156 42 42 32 50
N 3/8 W D323001 G 3/8 ̋ i 60 195 60 60 46 150
N 1/2 W D423001 G 1/2 ̋ i 60 195 60 60 46 150
N 3/4 W D523001 G 3/4 ̋ i 80 260 80 80 66 379
N 1 W D623001 G 1 ̋ i 80 260 80 80 66 379
2-way filter unit Consists of filter pressure reducer and
mist oiler
Fully assembled
Regulation range 0-12 bar
Semi-automatic drainage
Standard features include: pressure gauge
and 20 μm filter element
For installation in machines or mounting on walls
The technical data corresponds to that of the
individual components
Type Art. no.
Con
nec
t-in
g t
hre
ad
WE 2-fach 1/4 W D226026 G 1/4 ̋ i
WE 2-fach 3/8 W D326026 G 3/8 ̋ i
WE 2-fach 1/2 W D426026 G 1/2 ̋ i
WE 2-fach 3/4 W D458405 G 3/4 ̋ i
WE 2-fach 1 W D468405 G 1 ̋ i
Maintenance units
93
2 |
Pu
rify
ing
co
mp
ress
ed
air
3-way filter unit Consists of a water separator with filter,
pressure reducer and mist oiler
Fully assembled
Regulation range 0-12 bar
Semi-automatic drainage
Standard features include: pressure gauge
and 20 μm filter element
For installation in machines or mounting on walls
The technical data corresponds to that of the
individual components
Type Art. no.
Con
nec
t-in
g t
hre
ad
WE 3-fach 1/4 W D224026 G 1/4 ̋ i
WE 3-fach 3/8 W D324026 G 3/8 ̋ i
WE 3-fach 1/2 W D424026 G 1/2 ̋ i
WE 3-fach 3/4 W D524026 G 3/4 ̋ i
WE 3-fach 1 W D624026 G 1 ̋ i
Accessories for maintenance units Type Art. no.
FE-FDM 1/4 W G405012
FE-FDM 3/8-1/2 W G405013
FE-FDM 3/4-1 W G405014
Filter cartridge 20 μm, complete
Angular bracket Type Art. no.
WKB-WE 1/4 B200701
WKB-WE3/8-1/2 B400701
WKB-WE3/4-1 B400703
For simple and fast wall mounting
Disassembly spanner Type Art. no.
DSL-WE B400707
For condensate vessel
Maintenance units
94
2 |
Pu
rify
ing
co
mp
ress
ed
air
Series in modular designCommon features Filter unit with either 2 or 3 elements for compressed air
conditioning
The modular design permits quick expansion or replacement of
individual filters
Robust metal casing
2-way filter unit No unnecessary work thanks to automatic
drainage via float valves on filter pressure
reducer
Highest possible control accuracy thanks to
lockable fine adjustment
Standard features include 40 μm filter
element
With microfilter for separating extremely fine
oil and water aerosols and solid contaminants
with particles up to 0.01 μm
Residual oil content 0.01 mg/m³
Connection option for two pneumatic tools
using a second air outlet ( 1x G 1/4 ̋, 1 x G 1/2 ̋)
Simple draining of the sludge container
through quick-bleed valve
Colour indicator for quick check of
operational readiness
Permitted temperature range: +1,5°C to
+65°C
Working pressure: 1.5 to 12 bar
Type Art. no.
Air
in
let
Wei
gh
t(k
g)
Dim
en-
sion
s
(W x
D x
H)
FDM/FF 1/2 D426030 G 1/2 ̋ 2,5 183x124x290
3-way filter unit No unnecessary work thanks to automatic
drainage via float valves on filter pressure
reducer
Highest possible control accuracy thanks to
lockable fine adjustment
Standard features include 40 μm filter
element
With microfilter for separating extremely fine
oil and water aerosols and solid contaminants
with particles up to 0.01 μm
Residual oil content 0.005 mg/m³
Connection option for two pneumatic tools
using a second air outlet ( 1x G 1/4 ̋, 1 x G 1/2 ̋ )
Simple draining of the sludge container
through quick-bleed valve
Activated charcoal filter for perfectly condi-
tioned compressed air, suitable for spraying
applications
Permitted temperature range: +5°C to +40°C
Working pressure: 1.5 to 12 bar
Type Art. no.
Air
in
let
Wei
gh
t(k
g)
Dim
en-
sion
s
(W x
D x
H)
FDM/FF/AF 1/2 D424030 G 1/2 ̋ 3,5 264x124x290
Activated carbon filters Activated charcoal filter for perfectly
conditioned compressed air, suitable for
spraying applications
For separating oil vapours, aroma and
flavouring additives
Residual oil content 0.005 mg/m³
Permitted temperature range: +5°C to +40°C
Working pressure: 1.5 to 12 bar
For retrofitting the 2-way filter unit
Type Art. no.
Air
in
let
Wei
gh
t(k
g)
Dim
en-
sio
ns
(W x
D
x H
)
AF 1/2 D640760 G 1/2 ̋ 1,0 70x63x245
Accessories Type Art. no.
Filter F-FF 1/2 B640360
Filter F-AF 1/2 B640760
Filter units
95
1
1
2 3
4
Are you considering installing a complete new compressed air solution? Do you wish to retrofit an
existing system? Or are you planning on purchasing another product?
Irrespective of where you require support – we will be glad to help at any time and offer you personal
advice eared specifically towards your individual company requirements. Our nationwide team of experts
will support you on the telephone and with the planning of your compressed air system on site.
We will take close and thorough consideration of the available space and your specific compressed
air requirements. and then create the perfect compressed air solution to match your application.
We will be glad to assist you further:
Telephone: +49 (0)7121 959-222 Domestic Sales+49 (0)7121 959-161 Export Sales
Fax: +49 (0)7121 959-151E-mail: [email protected]
Screw compressors
1Pistoncompressors
1Compressed air purification
2Pipe systems
3Compressed air tools
4
We would also be glad to help you
design your compressed air system
2 |
Pu
rify
ing
co
mp
ress
ed
air
96
03
3 |
Dis
trib
uti
ng
co
mp
ress
ed
air
Distributing compressed
air
Pipe systems | 98
Hoses and workshop equipment | 144
Connecting and joining technology | 151
Pipe systems in various sizes and designs:
tested and certified, stable, robust and flexible
Efficient conveying of compressed air from the compressor to the workplace with
robust, quickly installed pipe systems.
With a variety of connection systems and pipelines made of different materials, we
always have the right solution for your requirements – whether for indoor, outdoor,
underground or clean room routing.
All pipe systems from Schneider Druckluft are variable and can be extended or
combined with one another as required – without any welding, soldering or adhesive.
All components are tested and certified by the TÜV (German Technical Inspection Agency). A unique claim. Furthermore, the certificate confirms the compatibility of the systems.
The perfect pipe system –
for plugging, fastening or clamping
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
98
The reasons for our material selection are easy to explain: pipes made of the materials we use
are smooth on the inside and as a result, the compressed air flows with less friction so that the
pressure drop remains very low. This saves costs, as the compressor has to work less. In
addition, the pipes do not rust, which ensures a long service life and prevents maintenance.
Moreover, each of the materials offers its own special advantages and properties. The
pipelines can also be combined with one another.
Features of our compressed air pipes made of polyamide and
polyethylene netting:
Available in various lengths and diameters, by the roll or by the length
Weigh approx. 75 % less than conventional steel pipes and are therefore easy
to mount on walls and ceilings without requiring expensive retaining clips
Also available in UV resistant version for outdoor installations (black pipes)
Features of our pipes made of a special aluminium alloy:
Calibrated, rigid, powder-coated, 6 m long and recommended for indoor and
outdoor installations
Lightweight, stable and easy to lay using few pipe clips, ideal when used
as a main pipe (can be used in combination with flexible PA pipes)
Ideal in visible areas
Our stainless steel pipes:
Particularly hygienic and therefore ideal for clean room technology
(e.g. chip production) as well as food production and pharmaceutical industries
Also ideally suited for indoor and outdoor installations
Lightweight, stable and easy to lay using few pipe clips, ideal when used as a main pipe
Ideal for visible areas thanks to high-quality, attractive appearance
Whether plastic, aluminium or stainless steel:
our pipelines are robust and resistant to corrosion
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
99
Design data for
compressed air pipelines
When dimensioning a compressed air pipeline, the following items are
particularly important:
A pressure decrease from 6 to 5 bar reduces the power of your machines
and tools by up to 27%
If the final compression pressure is increased by 1 bar to compensate for
decreases in pressure, costs for operating power increase by 10%
Maintaining the compressed air flow speed at 5-10 m/s is a main priority
Apart from the straight pipeline sections, any pipeline fittings may be
responsible for the pressure loss. Substitute pipeline lengths are specified
for these pipeline fittings
For a closed circular pipeline, take half of the nominal length of the total
closed circular pipeline and the entire compressed air requirement into
consideration
For a stub line, take half of the total length of the stub line and the entire
compressed air requirement into consideration
For working overpressures higher than 7 bar, the pressure drop in the
compressed air pipeline decreases. Ask your Schneider airsystems
partner, who will determine the optimum size of the compressed air
pipeline for you
The design tables refer to a working overpressure of 7 bar,
Δ p (max.) 0.2 bar, flow speed (max.) 10 m/s3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
100
Fittings Comparable with 3/8“ 1/2“ 3/4“ 1“ 1 1/4“ 1 1/4“ 1 1/2“ 2“ 2 1/2“
Dia. internal 12 14 18 24 28 32 38 50 63
Dia. external 15 18 22 28 32 40 50 63 80
Ball valve 0,1 0,2 0,3 0,4 0,5 0,5 0,6 0,7 0,8
Angle 0,7 1,0 1,3 1,5 2,0 2,0 2,5 3,5 4,0
Pipe elbowr=d
0,1 0,2 0,3 0,3 0,4 0,4 0,5 0,6 0,9
Pipe elbowr=2d
0,1 0,1 0,1 0,2 0,2 0,2 0,3 0,3 0,4
T-piece 0,8 1,0 1,5 2,0 2,5 2,5 3,0 4,0 5,0
Reduction fitting 2d to d
0,4 0,5 0,5 0,6 0,7 0,7 0,8 1,0 1,5
A
D
C
F
B
E
Substitute pipeline lengths for fittingsWorking overpressure 7 bar, Δ p (max.) 0.2 bar, flow speed (max.) 10 m/s
Determining the pipeline diameterFirst of all, calculate the replacement pipe length for the fittings. The following fittings were included:
Replacement pipe length Nominal length1 Ball valve dia. 28 0.4 m 0.4 m
2 Angle pieces 90°, dia. 28 1.5 m 3.0 m
5 T-pieces, dia. 28 2.0 m 10.0 m
Total 13.4 m
The compressed air pipe length corrected by the replacement pipe length is: Lcorrected
= Lstraight
+ Lreplacement
Lcorrected
= 250 m + 13.4 m = 263.4 m
You can deduce from the tables that an aluminium pipe 32 mm in diameter or a VPE pipe 40 mm in diameter is large enough
for a compressed air flow rate of 2000 l/min. and a halved compressed air pipe length of 250 m (Lcorrected
= 263.4m).
Compressed air requirement: 2000 l/min
Working overpressure: 7 bar
Half closed circular pipeline length: 250 m
For dimensioning the circular pipeline, take halfof the nominal length of the total circular pipeline
and the entire compressed air requirement into
consideration.
Length A B C = 250m
Length D E F = 250m2000 l/min
Compressed air distribution with closed circular pipeline
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
101
Determine the diameter
of your pipeline
Closed circular pipeline, aluminiumWorking overpressure 7 bar, Δ p (max.) 0.2 bar, flow speed (max.) 10 m/s
Co
mp
ress
ed
air
de
live
ry q
ua
nti
ty
Length of the line25 m 50 m 75 m 100 m 150 m 200 m 250 m 300 m 400 m 500 m 750 m 1000 m
100 l/min 15 15 15 15 15 15 15 15 18 18 18 18200 l/min 15 15 15 15 15 18 18 18 18 18 22 22300 l/min 15 15 15 18 18 18 18 18 22 22 22 22400 l/min 15 15 18 18 18 18 22 22 22 28 28 28500 l/min 15 18 18 18 22 22 22 28 28 28 28 28
1000 l/min 18 18 22 22 22 22 28 28 28 28 32 321500 l/min 22 22 22 22 28 28 28 32 32 32 32 322000 l/min 22 22 28 28 28 28 32 32 32 32 40 403000 l/min 28 28 28 28 32 32 32 32 40 40 40 404000 l/min 28 28 32 32 32 32 32 40 40 40 50 505000 l/min 28 32 32 32 32 40 40 40 40 50 50 506000 l/min 32 32 32 40 40 40 40 50 50 50 50 638000 l/min 32 32 40 40 40 40 50 50 50 63 63 63
10000 l/min 40 40 40 40 50 50 50 63 63 63 63 6312000 l/min 40 40 50 50 50 50 63 63 63 63 63 6315000 l/min 40 50 50 50 63 63 63 63 63 63 63 >6320000 l/min 50 50 63 63 63 63 63 63 63 >63 >63 >63
Closed circular pipeline, polyamide (PA)/ cross-linked polyethylene (PeX)Working overpressure 7 bar, Δ p (max.) 0.2 bar, flow speed (max.) 10 m/s
Length of the line20 m 40 m 80 m 100 m 120 m 140 m 160 m 180 m 200 m 220 m 240 m 260 m 280 m 300 m 350 m 400 m 500 m
100 l/min 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 18 18200 l/min 15 15 15 15 18 18 18 18 18 18 22 22 22 22 22 22 22300 l/min 15 15 18 18 22 22 22 22 22 22 22 22 22 22 22 28 28400 l/min 15 15 18 18 22 22 22 22 22 22 22 22 28 28 28 28 28500 l/min 15 18 22 22 22 22 22 22 28 28 28 28 28 28 28 28 32
1000 l/min 22 22 28 28 28 28 28 28 28 32 32 32 32 32 32 32 321500 l/min 22 28 28 28 32 32 40 40 40 40 40 40 40 40 40 40 402000 l/min 28 28 32 32 40 40 40 40 40 40 40 40 40 50 50 50 503000 l/min 32 32 40 40 40 40 50 50 50 50 50 50 50 50 50 50 504000 l/min 40 40 40 40 50 50 50 50 50 50 50 50 63 63 63 63 635000 l/min 40 40 50 50 50 50 50 50 50 63 63 63 63 63 63 63 636000 l/min 40 40 50 50 50 63 63 63 63 63 63 63 63 63 63 63 638000 l/min 50 50 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63
10000 l/min 50 63 63 63 63 63 >63 >63 >63 >63 >63 >63 >63 >63 >63 >63 >63Co
mp
ress
ed a
ir d
eliv
ery
qu
anti
ty
Stub line, aluminium / polyamide (PA)/ cross-linked polyethylene (PeX)Working overpressure 7 bar, Δ p (max.) 0.2 bar, flow speed (max.) 10 m/s
Length of the line10 m 20 m 40 m 60 m 80 m 100 m 120 m 140 m 160 m 180 m 200 m 220 m 240 m 260 m 280 m 300 m 350 m 400 m
100 l/min 15 15 15 15 15 15 15 15 15 15 18 18 18 18 18 18 18 22200 l/min 15 15 15 15 18 18 22 22 22 22 22 22 22 22 22 22 22 28300 l/min 15 15 18 22 22 22 22 22 22 22 22 28 28 28 28 28 28 28400 l/min 15 15 18 22 22 22 22 22 28 28 28 28 28 28 32 32 32 32500 l/min 15 18 22 22 22 28 28 28 28 28 28 28 32 32 32 32 32 32
1000 l/min 22 22 28 28 28 28 32 32 32 40 40 40 40 40 40 40 40 401500 l/min 22 28 28 32 40 40 40 40 40 40 40 40 40 40 50 50 50 502000 l/min 28 28 32 40 40 40 40 40 50 50 50 50 50 50 50 50 50 503000 l/min 32 32 40 40 50 50 50 50 50 50 50 50 50 50 50 50 63 634000 l/min 32 40 40 50 50 50 50 63 63 63 63 63 63 63 63 63 63 635000 l/min 40 40 50 50 50 63 63 63 63 63 63 63 63 63 63 63 63 636000 l/min 40 40 50 50 63 63 63 63 63 63 63 63 63 63 63 63 63 638000 l/min 50 50 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63
10000 l/min 50 63 63 63 >63 >63 >63 >63 >63 >63 >63 >63 >63 >63 >63 >63 >63 >63Co
mp
ress
ed a
ir d
eliv
ery
qu
anti
ty
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
102
Summarised:Low installation costs
Low operating costs
Low maintenance costs
Patented “Click it” plug-in system from Schneider airsystems
Conventionalscrew-fit pipe system
Our pipe system
15-28 mm
The pipe system for air requirements up to 4000 l/min
In line with our philosophy as a complete system provider that offers you the right solution
down to the last detail, you can assemble the perfect pipeline for your needs from our pipe
systems with diameters from 15-28 mm: All of the pipes, connectors and dead-end
distribution blocks guarantee long-lasting reliability and impermeability.
Of course, they also include the added extra of consultation, if you should have any questions
or special requests. Our 15-28 mm pipe system offers you the following advantages:
Materials to suit your wants and needs – all pipelines are available in aluminium,
stainless steel and polyamide
Quick pipeline routing due to easy installation in “Click it” plug-in system – without
soldering, adhesive or screws
Easy use of compressed air at the workplace with pipeline sockets as the perfect
complement
For very high temperatures, the brass clamping ring system in sizes up to 28 mm offers a
reliable, long-lasting leakproof connection between pipelines
A cost comparison:
Maintenance costs
Operating costs
Installation costs
Material costs
Operating costs
Installation costs
Material costs
Maintenance costs
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
103
Lay pipelines quickly and easily with a few hand movements with the practical
“Click it” system and extend or modify existing pipelines – the flexible plug-in system
offers a wide selection of different connectors.
Socket system 15-28 mm“Click it” –
a flexible system
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
104
No other pipe system is modified as often as a compressed air network. No problem with the “Click it” system:
The connection can be detached easily with only a few hand movements and without causing damage to the
pipe or connector. All parts can be reused as a result.
1 | The stainless steel retaining claw provides a force lock
for retaining the pipe securely
2 | Oil-resistant O-ring for complete impermeability, even
with oil containing compressed air
3 | Pipe stop makes a “click” when the pipe is attached
4 | Spacer for centring the pipe in the fitting exactly – protects
the O-ring
5 | Support sleeve for securing all components in the correct
position
6 | Disassembly ring for easy separation of the plug
connection. Impossible for the connection to accidentally
come loose
7 | Compact metal body for maximum resistance to
breakage
1 2
3
45
6
7
Click it –
the innovative pipe system
3. Join the pipes using plug connectors
When inserted as far as it will go, the pipe is completely airtight and ease
of installation saves an enormous amount of time.
2. Deburr and chamfer
So that everything runs smoothly and fits together, visually
and otherwise.
1. Cut the pipe to the right size
Accurate to the millimetre using the
Schneider airsystems pipe shears.
4. Disassembly with just a few hand movements
Press clip against connector – pull pipe out of connector – and you're done.
Cutting to length
Deburring
Disassembling
Assembling
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
105
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Polyamide pipes Polyamide (PA)
Colour: grey
Rolled pipe (DLR-R)
Lengths of pipe (DLR-S)
UV-resistant
Free of silicone
15 18 22 28
Type Art. no.
DLR-R-PA-G 15x12mm/10m E815108
DLR-R-PA-G 15x12mm/25m E815109
DLR-R-PA-G 18x14mm/10m E818108
DLR-R-PA-G 18x14mm/25m E818109
DLR-R-PA-G 22x18mm/25m E822109
DLR-R-PA-G 28x23mm/25m E828109
DLR-S-PA-G 15x12mm/6m E815107
DLR-S-PA-G 18x14mm/6m E818107
DLR-S-PA-G 22x18mm/6m E822107
DLR-S-PA-G 28x23mm/6m E828107
System/Ø
Polyamide pipes Polyamide (PA)
Colour: black
Rolled pipe (DLR-R)
Lengths of pipe (DLR-S)
UV-resistant
Free of silicone
15 18 22
Type Art. no.
DLR-R-PA-S 15x12mm/25m E815100
DLR-R-PA-S 18x14mm/25m E818100
DLR-R-PA-S 22x18mm/25m E822100
DLR-S-PA-S 22x18mm/6m E822106
System/Ø
Special aluminium alloy pipes Inflexible
Calibrated
Colour: grey
Powder-coated
For interior and exterior installation
Ideal as a main pipe as lightweight, stable
and easy to lay using few pipe clips
Compatible with flexible PA pipe
UV-resistant
Free of silicone
15 18 22 28
Type Art. no.
DLR-ALU-G 15x12mm/6m E815205
DLR-ALU-G 18x15mm/6m E818205
DLR-ALU-G 22x18mm/6m E822205
DLR-ALU-G 28x24mm/6m E828205
System/Ø
Straight screw-in click connector Brass
NBR seal
Free of silicone
15 18 22 28
Type Art. no.
STV-GES15-G1/2a E815335
STV-GES18-G3/4a E818334
STV-GES18-G 1/2a E818335
STV-GES22-G3/4a E822334
STV-GES22-G1/2a E822335
STV-GES28-G1a E828335
System/Ø
Straight screw-on click connector Brass
NBR seal
Free of silicone
15 18 22 28
Type Art. no.
STV-GES15-G1/2i E815333
STV-GES18-G1/2i E818332
STV-GES18-G3/4i E818333
STV-GES22-G1/2i E822332
STV-GES22-G3/4i E822333
STV-GES28-G1i E828333
System/Ø
Socket system 15-28 mmMaximum operating pressure 15 bar at 20°C. With technical inspection certificate.
Straight plug-in connector Brass
NBR seal
Free of silicone
15 18 22 28
Type Art. no.
STV-GS15 E815337
STV-GS18 E818337
STV-GS22 E822337
STV-GS28 E828337
System/Ø
106
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Angular connector 90° Brass
NBR seal
Free of silicone
15 18 22 28
Type Art. no.
STV-W90-15 E815338
STV-W90-18 E818338
STV-W90-22 E822338
STV-W90-28 E828338
System/Ø
Angular connector 45° Brass
NBR seal
Free of silicone
15 18 22 28
Type Art. no.
STV-W45-15 E815355
STV-W45-18 E818355
STV-W45-22 E822355
STV-W45-28 E828355
System/Ø
Angular male plug-in connector Brass
NBR seal
Free of silicone
15 18 22 28
Type Art. no.
WV15-G1/2a E815336
WV18-G1/2a E818336
WV22-G 3/4a E822336
WV28-G1a E828336
System/Ø
T-plug-in connector Brass
NBR seal
Free of silicone
15 18 22 28
Type Art. no.
STV-TS15 E815339
STV-TS18 E818339
STV-TS22 E822339
STV-TS28 E828339
STV-TS22-15-22 E822330
STV-TS22-18-22 E822331
STV-TS28-18-18 E828328
STV-TS28-22-22 E828329
STV-TS28-18-28 E828330
STV-TS28-22-28 E828331
System/Ø
Reducing plug-in connector With slot for retaining claw
Brass
NBR seal
Free of silicone
18 22 28
Type Art. no.
STV-GRS 22a x 18i E822351
STV-GRS 28a x 18i E828340
STV-GRS 28a x 22i E828341
System/Ø
Socket system 15-28 mmMaximum operating pressure 15 bar at 20°C. With technical inspection certificate.
Sliding sleeve For repairing pipelines
For closing ring lines
Brass
NBR seal
Free of silicone
15 18 22 28
Type Art. no.
STV-SM 15 E815352
STV-SM 18 E818352
STV-SM 22 E822352
STV-SM 28 E828352
System/Ø
107
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Blind cap Brass
NBR seal
Free of silicone
15 18 22 28
Type Art. no.
STV-BK 15 E815314
STV-BK 18 E818314
STV-BK 22 E822314
STV-BK 28 E828314
System/Ø
Connecting adapter Brass
Free of silicone
15 18 22 28
Type Art. no.
VST15xG1/2a E815360
VST18xG1/2a E818360
VST18xG3/4a E818361
VST22xG1/2a E822360
VST22xG3/4a E822361
VST28xG1a E828361
System/Ø
Air shut-off cock For shutting off compressed air pipes or
individual sections of stub, ring or outlet
pipes
Shutting off the compressed air pipes
reduces energy costs
NBR seal
15 18 22 28
Type Art. no.
STS-LAH 15-2GES 15 E815350
STS-LAH 18-2GES 18 E818350
STS-LAH 22-2GES 22 E822350
STS-LAH 28-2GES 28 E828350
System/Ø
Energy-saving system Shutting off the compressed air pipes
reduces energy costs
Open slowly e.g. to fill the pipe without
generating pressure surges
Capable of performing simple control
tasks
Brass nickel-plated ball valve, hard-
chrome plated ball with Teflon coating
230 V control boxes (switching
compressed air supply on and off)
Control lamp
NBR seal
22 28
Type Art. no.
STS-ESAT 22 S E822365
STS-ESAT 28 S E828365
System/Ø
Water collector For manual operation
For installation at the end of a pipe or
incline
With ball valve as standard
Wit male connector
NBR seal
15 18 22
Type Art. no.
STS-WSM 15 E815414
STS-WSM 18 E818414
STS-WSM 22 E822414
System/Ø
Socket system 15-28 mmMaximum operating pressure 15 bar at 20°C. With technical inspection certificate.
Water collector For automatic operation
With automatic condensate discharger
and float valve
For installation at the end of a pipe or
incline
With ball valve as standard
Wit male connector
NBR seal
15 18 22
Type Art. no.
STS-WSA 15 E815345
STS-WSA 18 E818345
STS-WSA 22 E822345
System/Ø
108
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
V4A stainless steel pipes Stainless steel V4A
Inflexible
For interior and exterior installation
Ideal as a main pipe as lightweight, stable
and easy to lay using few pipe clips
Compatible with flexible PA pipe
15 22
Type Art. no.
DLR-V4A 15x13mm/6m E815400
DLR-V4A 22x19,6mm/6m E822400
System/Ø
Straight screw-in click connector Stainless steel V4A
EPDM seal
15 22
Type Art. no.
STV-GES15-G1/2a V4A E815381
STV-GES22-G1/2a-V4A E822381
STV-GES22-G3/4a-V4A E822382
System/Ø
Straight screw-on click connector Stainless steel V4A
EPDM seal
15 22
Type Art. no.
STV-GES15-G1/2i V4A E815383
STV-GES22-G1/2i-V4A E822383
STV-GES22-G3/4i-V4A E822384
System/Ø
Straight plug-in connector Stainless steel V4A
EPDM seal
15 22
Type Art. no.
STV-GS15 V4A E815385
STV-GS22 V4A E822385
System/Ø
Angular connector 90° Stainless steel V4A
EPDM seal
15 22
Type Art. no.
STV-W90/15 V4A E815386
STV-W90/22 V4A E822386
System/Ø
Angular connector 45° Stainless steel V4A
EPDM seal
15 22
Type Art. no.
STV-W45/15 V4A E815387
STV-W45/22 V4A E822387
System/Ø
Angular male plug-in connector Stainless steel V4A
EPDM seal
15 22
Type Art. no.
WV15-G1/2a-V4A E815392
WV22-G3/4a-V4A E822392
System/Ø
T-plug-in connector Stainless steel V4A
EPDM seal
15 22
Type Art. no.
STV-T15 V4A E815388
STV-T22 V4A E822388
STV-T22-15-22 V4A E822389
System/Ø
V4A socket system 15-28 mmMaximum operating pressure 15 bar at 20°C. With technical inspection certificate.
109
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Sliding sleeve Stainless steel V4A
EPDM seal
15 22
Type Art. no.
STV-SM 15 V4A E815390
STV-SM 22 V4A E822390
System/Ø
Blind cap Stainless steel V4A
EPDM seal
15 22
Type Art. no.
STV-BK 15 V4A E815391
STV-BK 22 V4A E822391
System/Ø
V4A socket system 15-28 mmMaximum operating pressure 15 bar at 20°C. With technical inspection certificate.
110
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Pipe clips For mounting using dowels
Compressed air pipe inserted with
minimal effort
With elongated hole for attachment with
screw and centring point on base for
accurate alignment
Screw head countersunk in the base
Resistant to cold
Colour: grey and black
Quantity in pack: 25
15 18 22 28
Type Art. no.
RK15grau/25 E815425
RK18grau/25 E818425
RK22grau/25 E822425
RK28grau/25 E828425
RK15schwarz/25 E815125
RK18schwarz/25 E818125
RK22schwarz/25 E822125
RK28schwarz/25 E828125
System/Ø
Fixing set Set including screws and dowels
For pipe clips
Screws 4x35 galvanised, dowel S 6
Quantity in pack: 100
Type Art. no.
BEFG 4x35,0-S6/100 B030203
Assembly clips MKL 1-4mm: For steel girders, thickness
1-4 mm
MKL 4-7mm: For steel girders, thickness
4-7 mm
MKL 8-12mm: For steel girders, thickness
8-12 mm
HA-13-20mm: For assembly clips (thick-
ness 1-4 mm) for thickness 13-20 mm
Quantity in pack: 50
15 18 22 28
Type Art. no.
MKL 1-4mm/18/50 E815028
MKL 1-4mm/22/50 E822028
MKL 4-7mm/18/50 E815026
MKL 4-7mm/22/50 E822026
MKL 4-7mm/32/50 E832026
MKL 8-12mm/18/50 E815027
MKL 8-12mm/22/50 E822027
MKL 8-12mm/32/50 E832027
HA-13-20mm/50 E800100
System/Ø
Pipe clamp Quantity in pack: 25 15 18 22 28
Type Art. no.
RSL 15-19mm/25 E818448
RSL 21-23mm/25 E822448
RSL 26-28mm/25 E828448
System/Ø
Hanger bolt M8 x 80
Type Art. no.
SS-M 8 x 80 B030204
Disassembly pliers For detaching the plug-in system 15 18 22 28
Type Art. no.
STS-DZ 15 B322670
STS-DZ 18 B322671
STS-DZ 22 B322672
STS-DZ 28 B322673
System/Ø
Socket system 15-28 mmAssembly aids
Disassembly clip For detaching the plug-in system 15 18 22 28
Type Art. no.
STS-DMC 15 B322674
STS-DMC 18 B322675
STS-DMC 22 B322676
STS-DMC 28 B322677
System/Ø
111
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Universal tool For chamfering and deburring aluminium
pipes, marking insertion depths and
notching indentations on hard surfaces
(e.g. V4A pipelines)
For all diameters, 15-28 mm system
Type Art. no.
STS-EG 12-28 B322678
Pipe shears For cutting PA piping, max. dia. 28 mm
(with revolving blade)
With impact function
Type Art. no.
RS 28 PA D200602
Spare knife for pipe shears 2 units
Type Art. no.
MR-RS 28 PA / 2 B322687
Tubing cutter For aluminium and stainless steel piping,
dia. 15-32 mm
Type Art. no.
ROS 32 Alu D200108
Spare knife for tubing cutter 1 unit
Type Art. no.
MR-RS 32 Alu B322291
Deburring tool For deburring plastic, aluminium and
stainless steel pipes
For inner and outer diameters up to
35 mm
Type Art. no.
EG 35 PA-Alu-V4A B800552
Deburring blade For deburring the inside of aluminium
pipes
Type Art. no.
EG-Alu D200603
Anti-friction agent For easy installation of compressed air
pipes
Free of silicone
Type Art. no.
GMI 65 B111015
Socket system 15-28 mmAssembly aids
Sticker For labelling pipelines according to VBG 1,
DIN 2403
Type Art. no.
Co
nte
nts
Dim
en-
sio
ns
(mm
)
AK-Compressed air small RL-Sy B800600 Sheet with 10 stickers 75x16
AK-Condensate B800602 Sheet with 10 stickers 75x16
112
Innovative, flexible and economical – versatile pipe boxes are fully compatible with the
Schneider airsystems pipe system and various attachment parts and can be extended by
fitting additional outlet components.
Pipe sockets 15-28 mmGrowing with your requirements –
for greater economic efficiency
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
113
Model overview:
A flexible system with
unimagined possibilities
Uncomplicated assemblyThe screens of the basis sockets serve
additionally as drilling templates and spirit
level supports.
Flexible use as an air inlet,
air passage and air junction box –
some even with rear outlet
Long-lasting and permanently tight thanks to metal thread inserts
Simple assembly by removing the screens
from the basis sockets and
screwing on the top sockets
Economical Continued use of existing
basic sockets for extensions
Extra versatilityThe top sockets are available in
three different models
Protection of linesThe air outlet is directed downwards
to avoid bending hoses
Model Art. no. Outlets Thread
Basis socket
RLD-B 2x1/2i E 800 230 2 1/2"
RLD-B 3x1/2i E 800 231 3 1/2"
RLD-B 4x1/2i E 800 232 4 1/2"
RLD-B 6x1/2i E 800 233 6 1/2"
RLD-B 4x1i-1/2i E 800 234 4 /1 1" /1/2"
Top socket
RLD-T 2x1/2i E 800 240 2 1/2"
RLD-T 3x1/2i E 800 241 3 1/2"
RLD-T 4x1/2i E 800 242 4 1/2"
INDUSTRY PRIZE 2010
NOMINATED
Five basis sockets with two to six air outlets
can be combined with three top sockets with
two to four outlets.
If one basis socket is initially sufficient, the
screen included in the delivery is clipped
onto it. If your socket requirements increase,
the system can be extended at any time by
adding a top socket without having to
disassemble the basis socket.
Further pipe sockets can be connected
without any problem at the side via a short
pipeline or a double nipple. If an outlet is no
longer needed, simply lock it with a locking
screw.
Example designation: RLD-BT 15-KH-3SSK
= basis + top pipe box
for pipe system Ø 15 mm
with ball valve
and 3 safety quick-release couplings
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
114
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Midi dead-end distribution box EVM For air distribution to the end of outlet
pipes
End distribution adapter, extremely
compact for cramped spaces W x D x H:
60 x 43 x 49 mm
Wall or ceiling mounting
1-way or 2-way air distribution
Max. operating pressure 15 bar at 20°C
Type Art. no.
EVM 3/8-1/2 E800212
EVM 2 x 3/8-1/2 E800213
STS-LDDM 3/8-2x1/2 E800214
Midi air inlet box LEM Wall mounting
With quick-action coupling and 1/2 ̋
internal thread for connecting hose to
compressor.
Max. operating pressure 15 bar at 20°C
15 18
Type Art. no.
STS-LEM15-G1/2i-SK-GES15 E815365
STS-LEM18-G1/2i-SK-GES18 E818365
System/Ø
Midi air connection block LDDM with quick-action coupling
Wall or ceiling mounting
Max. operating pressure 15 bar at 20°C
15 18
Type Art. no.
STS-LDDM15-SK-2GES15 E815367
STS-LDDM18-SK-2GES18 E818367
System/Ø
Midi dead-end distribution box EVM with quick-action coupling One-way air distribution
Wall or ceiling mounting
Max. operating pressure 15 bar at 20°C
15 18
Type Art. no.
EVM15-SK-GES15 E815369
EVM18-SK-GES18 E818369
System/Ø
Midi dead-end distribution box EVM with quick-action coupling 2-way air distribution
Wall or ceiling mounting
Max. operating pressure 15 bar at 20°C
15 18
Type Art. no.
EVM15-2SK-GES15 E815371
EVM18-2SK-GES18 E818371
System/Ø
Midi dead-end distribution box EVM with quick-action coupling and stop cock
One-way air distribution
Wall or ceiling mounting
Max. operating pressure 15 bar at 20°C
15 18
Type Art. no.
EVM15-SK-GES15 E815379
EVM18-SK-GES18 E818379
System/Ø
Midi dead-end distribution box EVM with quick-action coupling and stop cock
2-way air distribution
Wall or ceiling mounting
Max. operating pressure 15 bar at 20°C
15 18
Type Art. no.
EVM15-2SK-GES15 E815380
EVM18-2SK-GES18 E818380
System/Ø
Midi pipe blocks for plug-in system 15-18 mmMidi system for applications with limited space. With technical inspection certificate.
115
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Midi dead-end distribution box EVM with maintenance device and stop cock
Standard features include: pressure
reducer, pressure gauge and 2 quick
release couplings
Wall or ceiling mounting
Max. operating pressure 13 bar at 20°C
15 18
Type Art. no.
EVM15-DM-SK-GES15 E815374
EVM18-DM-SK-GES18 E818374
System/Ø
Midi dead-end distribution box EVM with maintenance device and stop cock
Complete with filter pressure reducer with
manual condensate discharge, pressure
gauge with quick-release coupling and
1 quick-release coupling for unregulated
pressure
Wall mounting
Max. operating pressure 13 bar at 20°C
15 18
Type Art. no.
EVM15-FDM-SK-GES15 E815373
EVM18-FDM-SK-GES18 E818373
System/Ø
Midi dead-end distribution box EVM with maintenance device and stop cock
Complete with filter pressure reducer with
manual condensate discharge, pressure
gauge, mist oiler and quick-release
coupling and 1 quick-release coupling for
unregulated pressure
Wall mounting
Max. operating pressure 13 bar at 20°C
15 18
Type Art. no.
EVM15-FDM/N-SK-GES15 E815376
EVM18-FDM/N-SK-GES18 E818376
System/Ø
Midi pipe blocks for plug-in system 15-18 mmMidi system for applications with limited space. With technical inspection certificate.
116
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Air inlet box Wall or ceiling mounting
Basis socket with integrated plug
connector for simple connection of the
pipeline
Can be extended by Top socket
2x G1/2 ̋i threaded connection, 1x for
connection of the compressor, 1x for
extraction
Including removable screen, which can
be used as a drilling template
15 18 22
Type Art. no.
RLD-B 15-2x1/2i E815276
RLD-B 18-2x1/2i E818276
RLD-B 22-2x1/2i E822276
System/Ø
Air inlet box with quick-release coupling Wall or ceiling mounting
Basis socket with integrated plug connector
for simple connection of the pipeline
With quick-release coupling for direct air
extraction
Can be extended by Top socket
1x G1/2 ̋i threaded connection for
connection of the compressor
Including removable screen, which can
be used as a drilling template
15 18 22
Type Art. no.
RLD-B 15-1/2i-SK E815286
RLD-B 18-1/2i-SK E818286
RLD-B 22-1/2i-SK E822286
System/Ø
Air inlet box with safety quick-release coupling Wall or ceiling mounting
Basis socket with integrated plug connector
for simple connection of the pipeline
With safety quick-release coupling for
direct air extraction
Can be extended by Top socket
1x G1/2 ̋i threaded connection for
connection of the compressor
Including removable screen, which can
be used as a drilling template
15 18 22
Type Art. no.
RLD-B 15-1/2i-SSK E815296
RLD-B 18-1/2i-SSK E818296
RLD-B 22-1/2i-SSK E822296
System/Ø
Air connection block with quick-release coupling Wall or ceiling mounting
Basis socket with integrated plug
connector for simple connection of the
pipeline
Can be extended by Top socket
1x G1/2 ̋i threaded connection for
connection of the compressor
Including removable screen, which can
be used as a drilling template
15 18 22
Type Art. no.
RLD-B 2x15-SK E815283
RLD-B 2x18-SK E818283
RLD-B 2x22-SK E822283
System/Ø
Air distribution box Wall or ceiling mounting
Basis socket with integrated plug
connector for simple connection of the
pipeline
Can be extended by Top socket
1x G1/2 ̋i threaded connection for air
extraction
Including removable screen, which can
be used as a drilling template
15 18 22
Type Art. no.
RLD-B 3x15-1/2i E815274
RLD-B 3x18-1/2i E818274
RLD-B 3x22-1/2i E822274
System/Ø
Pipe blocks for plug-in system 15-22 mmMaximum operating pressure 15 bar at 20°C. With technical inspection certificate.
117
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Air junction box with quick-release coupling Wall or ceiling mounting
Basis socket with integrated plug
connector for simple connection of the
pipeline
Can be extended by Top socket
With quick-release coupling for direct air
extraction
Including removable screen, which can
be used as a drilling template
15 18 22
Type Art. no.
RLD-B 3x15-SK E815284
RLD-B 3x18-SK E818284
RLD-B 3x22-SK E822284
System/Ø
Transverse distributor Wall or ceiling mounting
Basis socket with integrated plug
connector for simple connection of the
pipeline
Can be extended by Top socket
2x G1/2 ̋i threaded connection for
extraction, both sealed with blind plugs
Including removable screen, which can
be used as a drilling template
15 18 22
Type Art. no.
RLD-B 4x15-2x1/2i E815275
RLD-B 4x18-2x1/2i E818275
RLD-B 4x22-2x1/2i E822275
System/Ø
Dead-end distribution box Wall or ceiling mounting
Basis socket with integrated plug
connector for simple connection of the
pipeline
Can be extended by Top socket
1x G1/2 ̋i threaded connection for air
extraction
Including removable screen, which can
be used as a drilling template
15 18 22
Type Art. no.
RLD-B 15-1/2i E815270
RLD-B 18-1/2i E818270
RLD-B 22-1/2i E822270
System/Ø
Dead-end distribution box with quick-release coupling Wall or ceiling mounting
Basis socket with integrated plug
connector for simple connection of the
pipeline
Can be extended by Top socket
With quick-release coupling for direct
air extraction
Including removable screen, which can
be used as a drilling template
15 18 22
Type Art. no.
RLD-B 15-SK E815280
RLD-B 18-SK E818280
RLD-B 22-SK E822280
System/Ø
Pipe blocks for plug-in system 15-22 mmMaximum operating pressure 15 bar at 20°C. With technical inspection certificate.
118
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Dead-end distribution box with ball valve Wall or ceiling mounting
Basis socket with integrated plug
connector for simple connection of the
pipeline
Ball valve for shutting off the air – ideal for
assembly of the Top socket
Can be extended by Top socket
1x G1/2 ̋i threaded connection for air
extraction
Including removable screen, which can
be used as a drilling template
15 18 22
Type Art. no.
RLD-B 15-KH-1/2i E815271
RLD-B 18-KH-1/2i E818271
RLD-B 22-KH-1/2i E822271
System/Ø
Dead-end distribution box with ball valve and quick-action coupling
Wall or ceiling mounting
Basis socket with integrated plug
connector for simple connection of the
pipeline
Ball valve for shutting off the air – ideal for
assembly of the Top socket
Can be extended by Top socket
With quick-release coupling for direct air
extraction
Including removable screen, which can
be used as a drilling template
15 18 22
Type Art. no.
RLD-B 15-KH-SK E815281
RLD-B 18-KH-SK E818281
RLD-B 22-KH-SK E822281
System/Ø
Dead-end distribution box with ball valve and quick-action safety coupling
Wall or ceiling mounting
Basis socket with integrated plug
connector for simple connection of the
pipeline
Ball valve for shutting off the air – ideal for
assembly of the Top socket
Can be extended by Top socket
With safety quick-release coupling for
direct air extraction
Including removable screen, which can
be used as a drilling template
15 18 22
Type Art. no.
RLD-B 15-KH-SSK E815291
RLD-B 18-KH-SSK E818291
RLD-B 22-KH-SSK E822291
System/Ø
Top socket with quick-release couplings For assembly on a Basis socket
Top socket including fastening material
and sealing
With quick-release couplings made of
brass for direct air extraction
2-way air distribution
Type Art. no.
RLD-T 2xSK E800245
Pipe blocks for plug-in system 15-22 mmMaximum operating pressure 15 bar at 20°C. With technical inspection certificate.
119
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Top socket with quick-release couplings For assembly on a Basis socket
Top socket including fastening material
and sealing
With quick-release couplings made of
brass for direct air extraction
3-way air distribution
Type Art. no.
RLD-T 3xSK E800246
Top socket with quick-release couplings For assembly on a Basis socket
Top socket including fastening material
and sealing
With quick-release couplings made of
brass for direct air extraction
4-way air distribution
Type Art. no.
RLD-T 4xSK E800247
Top socket with safety quick-release coupling For assembly on a Basis socket
Top socket including fastening material
and sealing
With safety quick-release couplings made
of hardened steel for direct air extraction
With 2 safety quick-release couplings with
a specially high flow capacity
Type Art. no.
RLD-T 2xSSK E800255
Top socket with safety quick-release coupling For assembly on a Basis socket
Top socket including fastening material
and sealing
With safety quick-release couplings made
of hardened steel for direct air extraction
With 3 safety quick-release couplings with
a specially high flow capacity
Type Art. no.
RLD-T 3xSSK E800256
Top socket with safety quick-release coupling For assembly on a Basis socket
Top socket including fastening material
and sealing
With safety quick-release couplings made
of hardened steel for direct air extraction
With 4 safety quick-release couplings with
a specially high flow capacity
Type Art. no.
RLD-T 4xSSK E800257
Pipe blocks for plug-in system 15-22 mmMaximum operating pressure 15 bar at 20°C. With technical inspection certificate.
120
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Top socket with steel quick-release couplings For assembly on a Basis socket
Top socket including fastening material
and sealing
With quick-release couplings made of
hardened steel for direct air extraction
With 2 steel quick-release couplings with
a specially high flow capacity
Type Art. no.
RLD-T 2xSK-FE E800265
Top socket with steel quick-release couplings For assembly on a Basis socket
Top socket including fastening material
and sealing
With quick-release couplings made of
hardened steel for direct air extraction
With 3 steel quick-release couplings with
a specially high flow capacity
Type Art. no.
RLD-T 3xSK-FE E800266
Top socket with steel quick-release couplings For assembly on a Basis socket
Top socket including fastening material
and sealing
With quick-release couplings made of
hardened steel for direct air extraction
With 4 steel quick-release couplings with
a specially high flow capacity
Type Art. no.
RLD-T 4xSK-FE E800267
Top socket with pressure reducer For assembly on a Basis socket
Top socket including fastening material
and sealing
With 2 quick-release couplings, 1 of which
with pressure reducer
Including pressure gauge
Regulation range 0-12 bar
Type Art. no.
RLD-T 2xSK-DM E800248
Top socket with filter pressure reducer For assembly on a Basis socket
Top socket including fastening material
and sealing
With 2 quick-release couplings, 1 of which
with filter pressure reducer
Including pressure gauge
Regulation range 0-12 bar
Filter cartridge 20 μm, complete
Semi-automatic drainage
Type Art. no.
RLD-T 2xSK-FDM E800260
Pipe blocks for plug-in system 15-22 mmMaximum operating pressure 15 bar at 20°C. With technical inspection certificate.
121
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Pipeline socket Basis G1/2 ̋ i
Common features Universal use for air distribution in the pipe system
Can be used as an air inlet box, distribution box and dead-end
distribution box
Ideal for combining with the plug-in system 15-22 mm and the
corresponding pipe clamps because the wall clearance is perfectly
matched
Air inlets and outlets in G1/2 ̋i, with brass thread
Front air outlet with integrated interface for simple assembly
of a Top socket
Body made of impact-resistant, glass-fibre reinforced polyamide
(PA6 GF30)
Including removable screen, which can be used as a drilling
template
Dimensions without screen LxWxH: 85x85x45 mm, with screen:
48 mm height
Pipeline socket Basis G1/2 ̋ i Type Art. no.
RLD-B 2x1/2i E800230
With 2 air inlets and outlets G1/2 ̋i, with
brass thread
Pipeline socket Basis G1/2 ̋ i Type Art. no.
RLD-B 3x1/2i E800231
With 3 air inlets and outlets G1/2 ̋i, with
brass thread
Pipeline socket Basis G1/2 ̋ i Type Art. no.
RLD-B 4x1/2i E800232
With 4 air inlets and outlets G1/2 ̋i, with
brass thread
Pipeline socket Basis G1/2 ̋ i Type Art. no.
RLD-B 6x1/2i E800233
With 6 air inlets and outlets G1/2 ̋i, with
brass thread
Accessories Type Art. no.
Reducing nipple RDN-G1/2a x G3/4i E770275
Pipe blocks for plug-in system 15-22 mmMaximum operating pressure 15 bar at 20°C. With technical inspection certificate.
122
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Pipeline socket Basis G1˝ Universal use for air distribution in the pipe
system
Can be used as an air inlet box, transverse
distributor and dead-end distribution box
Ideal for combining with the plug-in system
28 mm and the corresponding pipe clamps
because the wall clearance is perfectly
matched
4 air inlets in G1˝i, 1 air outlet G1/2˝i with
interface for Top socket
Body made of black, hard-anodised
aluminium, lasered logo
Dimensions LxWxH: 90x90x53 mm
Type Art. no.
RLD-B 4x1i-1/2i E800234
Accessories Type Art. no.
Reduction fitting RDS-G1 x G3/4i E770079
Pipeline socket Top G1/2 ̋ The perfect extension of the Basis
sockets G1/2 ̋ and G1 ̋
For creating additional air outlets
Easy to assemble: simply screwed onto
the Basis socket
Including assembly material, sealing and
transport protective cap – to prevent loss
of equipment
Body made of impact-resistant, glass-
fibre reinforced polyamide (PA6 GF30)
Dimensions including screen LxWxH:
83x83x45 mm
With 2 air outlets G1/2 ̋i, with brass thread
Type Art. no.
RLD-T 2x1/2i E800240
Pipeline socket Top G1/2 ̋ The perfect extension of the Basis
sockets G1/2 ̋ and G1 ̋
For creating additional air outlets
Easy to assemble: simply screwed onto
the Basis socket
Including assembly material, sealing and
transport protective cap – to prevent loss
of equipment
Body made of impact-resistant, glass-
fibre reinforced polyamide (PA6 GF30)
Dimensions including screen LxWxH:
83x83x45 mm
With 3 air outlets G1/2 ̋i, with brass thread
Type Art. no.
RLD-T 3x1/2i E800241
Pipe blocks for plug-in system 15-22 mmMaximum operating pressure 15 bar at 20°C. With technical inspection certificate.
123
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Pipeline socket Top G1/2 ̋ The perfect extension of the Basis
sockets G1/2 ̋ and G1 ̋
For creating additional air outlets
Easy to assemble: simply screwed onto
the Basis socket
Including assembly material, sealing and
transport protective cap – to prevent loss
of equipment
Body made of impact-resistant,
glass-fibre reinforced polyamide
(PA6 GF30)
Dimensions including screen
LxWxH: 83x83x45 mm
With 4 air outlets G1/2 ̋i, with brass thread
Type Art. no.
RLD-T 4x1/2i E800242
Dead-end distribution box Basis+Top G1/2 ̋ Universal use for air distribution in the
pipe system
Ideal for combining with the plug-in
system 15-22 mm and the corresponding
pipe clamps because the wall clearance is
perfectly matched
Set consisting of Basis and Top socket
Air inlets and outlets in G1/2 ̋i, with brass
thread
Body made of impact-resistant, glass-
fibre reinforced polyamide (PA6 GF30)
Including removable screen, which can
be used as a drilling template
Top socket including fastening material
and sealing
Easy to assemble: first secure the Basis
socket on the wall and then screw the Top
socket onto the Basis socket
RLD-BT 2+2x1/2i: Basis socket with
2xG1/2 ̋i, Top socket 2xG1/2 ̋i
RLD-BT 2+3x1/2i: Basis socket with
2xG1/2 ̋i, Top socket 3xG1/2 ̋i
Type Art. no.
RLD-BT 2+2x1/2i E800243
RLD-BT 2+3x1/2i E800244
Dead-end distribution box Basis+Top with quick-release couplings Wall or ceiling mounting
Basis socket with integrated plug connector
for simple connection of the pipeline
Top socket with 2 quick-release couplings
made of brass for direct air extraction
Including removable screen, which can
be used as a drilling template
Top socket including fastening material
and sealing
15 18 22
Type Art. no.
RLD-BT 15-2xSK E815245
RLD-BT 18-2xSK E818245
RLD-BT 22-2xSK E822245
System/Ø
Pipe blocks for plug-in system 15-22 mmMaximum operating pressure 15 bar at 20°C. With technical inspection certificate.
124
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Dead-end distribution box Basis+Top with quick-release couplings Wall or ceiling mounting
Basis socket with integrated plug
connector for simple connection of the
pipeline
Top socket with 3 quick-release couplings
made of brass for direct air extraction
Including removable screen, which can be
used as a drilling template
Top socket including fastening material
and sealing
15 18 22
Type Art. no.
RLD-BT 15-3xSK E815246
RLD-BT 18-3xSK E818246
RLD-BT 22-3xSK E822246
System/Ø
Dead-end distribution box Basis+Top with ball valve and quick-release couplings
Wall or ceiling mounting
Basis socket with integrated plug
connector for simple connection of the
pipeline
Top socket with 2 quick-release couplings
made of brass for direct air extraction
Ball valve for shutting off the air – ideal for
assembly of the Top socket
Including removable screen, which can be
used as a drilling template
Top socket including fastening material
and sealing
15 18 22
Type Art. no.
RLD-BT 15-KH-2xSK E815445
RLD-BT 18-KH-2xSK E818445
RLD-BT 22-KH-2xSK E822445
System/Ø
Dead-end distribution box Basis+Top with ball valve and quick-release couplings
Wall or ceiling mounting
Basis socket with integrated plug
connector for simple connection of the
pipeline
Top socket with 3 quick-release couplings
made of brass for direct air extraction
Ball valve for shutting off the air – ideal for
assembly of the Top socket
Including removable screen, which can be
used as a drilling template
Top socket including fastening material
and sealing
15 18 22
Type Art. no.
RLD-BT 15-KH-3xSK E815446
RLD-BT 18-KH-3xSK E818446
RLD-BT 22-KH-3xSK E822446
System/Ø
Pipe blocks for plug-in system 15-22 mmMaximum operating pressure 15 bar at 20°C. With technical inspection certificate.
125
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Dead-end distribution box Basis+Top with ball valve and safety quick-release couplings
Wall or ceiling mounting
Basis socket with integrated plug
connector for simple connection of the
pipeline
Top socket with 2 safety quick-release
couplings for direct air extraction
Ball valve for shutting off the air – ideal for
assembly of the Top socket
Including removable screen, which can be
used as a drilling template
Top socket including fastening material
and sealing
15 18 22
Type Art. no.
RLD-BT 15-KH-2xSSK E815255
RLD-BT 18-KH-2xSSK E818255
RLD-BT 22-KH-2xSSK E822255
System/Ø
Dead-end distribution box Basis+Top with ball valve and safety quick-release couplings
Wall or ceiling mounting
Basis socket with integrated plug
connector for simple connection of the
pipeline
Top socket with 3 safety quick-release
couplings for direct air extraction
Ball valve for shutting off the air – ideal for
assembly of the Top socket
Including removable screen, which can
be used as a drilling template
Top socket including fastening material
and sealing
15 18 22
Type Art. no.
RLD-BT 15-KH-3xSSK E815256
RLD-BT 18-KH-3xSSK E818256
RLD-BT 22-KH-3xSSK E822256
System/Ø
Dead-end distribution box Basis+Top with ball valve and steel quick-release couplings
Wall or ceiling mounting
Basis socket with integrated plug
connector for simple connection of the
pipeline
Top socket with 2 steel quick-release
couplings for direct air extraction
Ball valve for shutting off the air – ideal for
assembly of the Top socket
Including removable screen, which can be
used as a drilling template
Top socket including fastening material
and sealing
15 18 22
Type Art. no.
RLD-BT 15-KH-2xSK-FE E815265
RLD-BT 18-KH-2xSK-FE E818265
RLD-BT 22-KH-2xSK-FE E822265
System/Ø
Pipe blocks for plug-in system 15-22 mmMaximum operating pressure 15 bar at 20°C. With technical inspection certificate.
126
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Dead-end distribution box Basis+Top with ball valve and steel quick-release couplings
Wall or ceiling mounting
Basis socket with integrated plug
connector for simple connection of the
pipeline
Top socket with 3 steel quick-release
couplings for direct air extraction
Ball valve for shutting off the air – ideal for
assembly of the Top socket
Including removable screen, which can be
used as a drilling template
Top socket including fastening material
and sealing
15 18 22
Type Art. no.
RLD-BT 15-KH-3xSK-FE E815266
RLD-BT 18-KH-3xSK-FE E818266
RLD-BT 22-KH-3xSK-FE E822266
System/Ø
Dead-end distribution box Basis+Top with ball valve, pressure reducer and quick-release couplings
Wall or ceiling mounting
Basis socket with integrated plug connector
for simple connection of the pipeline
Top socket with 2 quick-release couplings made
of brass, 1 of which with pressure reducer
Ball valve for shutting off the air – ideal for
assembly of the Top socket
Including pressure gauge
Regulation range 0-12 bar
Including removable screen, which can be
used as a drilling template
Top socket including fastening material
and sealing
15 18 22
Type Art. no.
RLD-BT 15-KH-2xSK-DM E815248
RLD-BT 18-KH-2xSK-DM E818248
RLD-BT 22-KH-2xSK-DM E822248
System/Ø
Dead-end distribution box Basis+Top with ball valve, filter pressure reducer and quick-release couplings
Wall or ceiling mounting
Basis socket with integrated plug connector
for simple connection of the pipeline
Top socket with 2 quick-release couplings
made of brass, 1 of which with filter
pressure reducer
Ball valve for shutting off the air – ideal for
assembly of the Top socket
Including pressure gauge
Regulation range 0-12 bar
Filter cartridge 20 μm, complete
Semi-automatic drainage
Including removable screen, which can be
used as a drilling template
Top socket including fastening material and
sealing
15 18 22
Type Art. no.
RLD-BT 15-KH-2xSK-FDM E815260
RLD-BT 18-KH-2xSK-FDM E818260
RLD-BT 22-KH-2xSK-FDM E822260
System/Ø
Pipe blocks for plug-in system 15-22 mmMaximum operating pressure 15 bar at 20°C. With technical inspection certificate.
127
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Plug-in connector Brass
NBR seal
15 18 22 28
Type Art. no.
STV-GES15-G1/2a E815335
STV-GES18-G 1/2a E818335
STV-GES22-G1/2a E822335
STV-GES28-G1a E828335
System/Ø
Ball valve Hot-pressed brass casing, nickel-plated,
hard-chrome plated brass ball, Teflon ball
seal, cast aluminium painted lever
Type Art. no.
KH-NI-40 G1/2i E050087
Double nipple For assembly of the ball valve
Type Art. no.
DN-MS-G1/2a x G1/2a E030144
Condensate drain valve Nickel-plated brass
Type Art. no.
KAV-G1/2a E030058
Quick-release coupling Brass
Type Art. no.
SK-NW7,2-G1/2a E700003
Safety quick-release coupling Hardened and galvanised steel
Type Art. no.
SSK-NW7,6-EURO-G1/2a E036913
Steel quick-release coupling Hardened and galvanised steel
Type Art. no.
SK-FE-NW7,6-EURO-G1/2a E033403
Fixing set Set including screws and dowels
For distribution adapters
Screws 5x45 galvanised, dowel S 6
Quantity in pack: 50
Type Art. no.
BEFG 5x45,0-S6/50 B030205
Pipe blocks for plug-in system 15-22 mmAssembly aids
128
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Thread-locking liquid Screw locking device SSI: for sealing and
securing metal screw connections under
medium load
Type Art. no.
SSI 10ml E771142
SSI 50ml E771140
Sealant Polytetrafluoroethylene sealing tape BND:
12 mm wide, 0.1 mm thick (10 reels in
pack)
Type Art. no.
BND-12mx12mm/10 E770125
Leak search spray For locating minute leaks in compressed-
air systems
Type Art. no.
LKSS 300 ml E770126
Pipe blocks for plug-in system 15-22 mmAssembly aids
129
The brass 15-28 mm pipe system is extremely robust and resistant to weathering.
Furthermore, the pipes are temperature-resistant, insensitive to UV radiation and suitable
for operating pressures of 15 bar at 20°C.
Brass pipe system 15-28 mmThe robust pipe system
for small to medium air requirements
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
130
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Polyamide pipes Polyamide (PA)
Colour: grey
Rolled pipe (DLR-R)
Lengths of pipe (DLR-S)
UV-resistant
Free of silicone
15 18 22 28
Type Art. no.
DLR-R-PA-G 15x12mm/10m E815108
DLR-R-PA-G 15x12mm/25m E815109
DLR-R-PA-G 18x14mm/10m E818108
DLR-R-PA-G 18x14mm/25m E818109
DLR-R-PA-G 22x18mm/25m E822109
DLR-R-PA-G 28x23mm/25m E828109
DLR-S-PA-G 15x12mm/6m E815107
DLR-S-PA-G 18x14mm/6m E818107
DLR-S-PA-G 22x18mm/6m E822107
DLR-S-PA-G 28x23mm/6m E828107
System/Ø
Polyamide pipes Polyamide (PA)
Colour: black
Rolled pipe (DLR-R)
Lengths of pipe (DLR-S)
UV-resistant
Free of silicone
15 18 22
Type Art. no.
DLR-R-PA-S 15x12mm/25m E815100
DLR-R-PA-S 18x14mm/25m E818100
DLR-R-PA-S 22x18mm/25m E822100
DLR-S-PA-S 22x18mm/6m E822106
System/Ø
Special aluminium alloy pipes Inflexible
Calibrated
Colour: grey
Powder-coated
For interior and exterior installation
Ideal as a main pipe as lightweight, stable
and easy to lay using few pipe clips
Compatible with flexible PA pipe
UV-resistant
Free of silicone
15 18 22 28
Type Art. no.
DLR-ALU-G 15x12mm/6m E815205
DLR-ALU-G 18x15mm/6m E818205
DLR-ALU-G 22x18mm/6m E822205
DLR-ALU-G 28x24mm/6m E828205
System/Ø
Straight screwed coupling Clamping ring connections
Brass
Used in combination with plastic pipes
the required support sleeves should
be ordered with the compression ring
connections
15 18 22 28
Type Art. no.
KSY-GE15-R1/2a E815035
KSY-GE18-R1/2a E818035
KSY-GE22-R1/2a E822032
KSY-GE22-R3/4a E822035
KSY-GE28-R3/4a E828036
KSY-GE28-R1a E828035
System/Ø
Straight pipe fitting Clamping ring connections
Brass
Used in combination with plastic pipes
the required support sleeves should
be ordered with the compression ring
connections
15 18 22 28
Type Art. no.
KSY-G15 E815037
KSY-G18 E818037
KSY-G22 E822037
KSY-G28 E828037
System/Ø
Conduit system 15-28 mmMaximum operating pressure 15 bar at 20°C. With technical inspection certificate.
131
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Threaded pipe angle Clamping ring connections
Brass
Used in combination with plastic pipes
the required support sleeves should
be ordered with the compression ring
connections
15 18 22 28
Type Art. no.
KSY-WV90-15 E815038
KSY-WV90-18 E818038
KSY-WV90-22 E822038
KSY-WV90-28 E828038
System/Ø
Screwed bend fitting Clamping ring connections
Brass
Used in combination with plastic pipes the
required support sleeves should be ordered
with the compression ring connections
28
Type Art. no.
KSY-BV28 E828031
System/Ø
Angular male connector Clamping ring connections
Brass
Used in combination with plastic pipes
the required support sleeves should
be ordered with the compression ring
connections
15 18 22
Type Art. no.
KSY-WEV15-R1/2a E815036
KSY-WEV18-R1/2a E818036
KSY-WEV22-R1/2a E822031
KSY-WEV22-R3/4a E822036
System/Ø
T-union Clamping ring connections
Brass
Used in combination with plastic pipes
the required support sleeves should
be ordered with the compression ring
connections
15 18 22 28
Type Art. no.
KSY-TVS15 E815039
KSY-TVS18 E818039
KSY-TVS18-15-18 E818033
KSY-TVS22 E822039
KSY-TVS22-15-22 E822033
KSY-TVS22-18-22 E822034
KSY-TVS28 E828039
KSY-TVS28-15-28 E828033
KSY-TVS28-18-28 E828034
System/Ø
Support sleeve Used in combination with plastic pipes
the required support sleeves should
be ordered with the compression ring
connections
15 18 22 28
Type Art. no.
KSY-SH15 E815030
KSY-SH18 E818030
KSY-SH22 E822030
KSY-SH28 E828030
System/Ø
Clamping ring15 18 22 28
Type Art. no.
KSY-SRI 15 G025004
KSY-SRI18 G025005
KSY-SRI22 G025006
KSY-SRI28 G028000
System/Ø
Conduit system 15-28 mmMaximum operating pressure 15 bar at 20°C. With technical inspection certificate.
132
The brass 32-63 mm pipe system is particularly robust and resistant to harsh weather
conditions. The pipes are extremely temperature-resistant, insensitive to UV radiation and
suitable for operating pressures of 15 bar at 20°C.
Brass pipe system 32-63 mmThe robust pipe system
for high air requirements
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
133
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Special aluminium alloy pipes Inflexible
Calibrated
Colour: grey
Powder-coated
For interior and exterior installation
Ideal as a main pipe as lightweight, stable
and easy to lay using few pipe clips
Compatible with flexible PA pipe
UV-resistant
Free of silicone
32 40 50 63
Type Art. no.
DLR-ALU-G 32x28mm/6m E832205
DLR-ALU-G 40x36mm/6m E840205
DLR-ALU-G 50x46mm/6m E850305
DLR-ALU-G 63x58mm/6m E863205
System/Ø
Connection screw fitting with female thread As an air inlet for compressed air pipes
or for connecting compressed air pipes
with fittings
Brass
32 40 50 63
Type Art. no.
MKS-AVI 32xG1i E832436
MKS-AVI 40xG1 1/4i E840436
MKS-AVI 50xG1 1/2i E850436
MKS-AVI 63xG2i E863436
System/Ø
Connection screw fitting with male thread For connecting compressed air pipes
with fittings
Brass
32 40 50 63
Type Art. no.
MKS-AVA 32xR1a E832435
MKS-AVA 40xR1 1/4a E840435
MKS-AVA 50xR1 1/2a E850435
MKS-AVA 63xR2a E863435
System/Ø
Screw fitting Screw connector/binder
Brass
32 40 50 63
Type Art. no.
MKS-SBV 32x32 E832437
MKS-SBV 40x40 E840437
MKS-SBV 50x50 E850437
MKS-SBV 63x63 E863437
System/Ø
Angle 90° Screw connector/binder
Brass
32 40 50 63
Type Art. no.
MKS-WV90-32x32mm E832438
MKS-WV90-40x40mm E840438
MKS-WV90-50x50mm E850438
MKS-WV90-63x63mm E863438
MKS-WV90-32mmxR1a E832442
MKS-WV90-40mmxR1 1/4a E840442
MKS-WV90-50mmxR1 1/2a E850442
MKS-WV90-63mmxR2a E863442
MKS-WV90-32mmxG1i E832443
MKS-WV90-40mmxG1 1/4i E840443
MKS-WV90-50mmxG1 1/2i E850443
MKS-WV90-63mmxG2i E863443
System/Ø
Conduit system 32-63 mmMaximum operating pressure 15 bar at 20°C. With technical inspection certificate.
134
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Angle 45° Screw connector/binder
Brass
32 40 50 63
Type Art. no.
MKS-WV45-32x32mm E832355
MKS-WV45-40x40mm E840355
MKS-WV 50x50mm/45 E850355
MKS-WV 63x63mm/45 E863355
System/Ø
T-union 90° Screw connector/binder
Brass
32 40 50 63
Type Art. no.
MKS-TVS32x32x32mm E832439
MKS-TVS40x40x40mm E840439
MKS-TVS50x50x50mm E850439
MKS-TVS63x63x63mm E863439
System/Ø
T-union 90° with female thread on middle adapter
Screw connector/binder
Brass
32 40 50 63
Type Art. no.
MKS-TVS32mmxG1ix32mm E832440
MKS-TVS40xG1 1/4ix40mm E840440
MKS-TVS50xG1 1/2ix50mm E850440
MKS-TVS63xG2ix63mm E863440
System/Ø
Air outlet clamp For additional air outlets on existing
pipes or if a gooseneck or direct air outlet
cannot be installed because of a lack of
space
Wall and ceiling installation
Max. operating pressure 10 bar at 20°C
A hole is drilled in the pipe. The size of the
hole matches the diameter of the hole on
the air outlet clip
Only for use with PE-Xa pipes
Type Art. no.
LAS 32 x G1/2i E832612
LAS 32 x G3/4i E832634
LAS 40 x G1/2i E840612
LAS 40 x G3/4i E840634
LAS 50 x G1/2i E850612
LAS 50 x G3/4i E850634
LAS 63 x G1/2i E863612
LAS 63 x G3/4i E863634
Sliding sleeve For repairing pipelines
For closing ring lines
Screw connector/binder
Brass
32 40 50 63
Type Art. no.
MKS-SM 32 E832352
MKS-SM 40 E840352
MKS-SM 50 E850352
MKS-SM 63 E863352
System/Ø
Reduction fitting With external and internal thread
For connecting a T-union to the plug-in
system
Brass
Type Art. no.
RDS-G1a x G1/2i E770078
RDS-G1 x G3/4i E770079
RDS-G1 1/4a x G1/2i E770095
RDS-G1 1/4a x G3/4i E770096
RDS-G1 1/2a x G1i E770093
RDS-G2a x G1i E770094
Conduit system 32-63 mmMaximum operating pressure 15 bar at 20°C. With technical inspection certificate.
135
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Air shut-off cock For shutting off pipes or individual
sections of stub, ring or outlet pipes,
e.g. for inspection and upgrade work
Shutting off the compressed air pipes
reduces energy costs
32 40 50 63
Type Art. no.
MKS-LAH 32-2AVA 32 E832350
MKS-LAH 40-2AVA 40 E840350
MKS-LAH 50-2AVA 50 E850350
MKS-LAH 63-2AVA 63 E863350
System/Ø
Energy-saving system Shutting off the compressed air pipes
reduces energy costs
Open slowly e.g. to fill the pipe without
generating pressure surges
Capable of performing simple control
tasks
Brass nickel-plated ball valve, hard-
chrome plated ball with Teflon coating
230 V control boxes (switching
compressed air supply on and off)
With manual actuator and control lamp
32 40 50 63
Type Art. no.
MKS-ESAT 32 MK E832365
MKS-ESAT 40 MK E840365
MKS-ESAT 50 MK E850365
MKS-ESAT 63 MK E863365
System/Ø
O-ring32 40 50 63
Type Art. no.
MKS-OR 32x3mm E832445
MKS-OR 40x3,5mm E840445
MKS-OR 50x3,5mm E850445
MKS-OR 63x5mm E863445
System/Ø
Intermediate ring32 40 50 63
Type Art. no.
MKS-ZR 37,5x33mm E832446
MKS-ZR 46,9x41mm E840446
MKS-ZR 50x56,9mm E850446
MKS-ZR 64x72,5mm E863446
System/Ø
Clamping ring32 40 50 63
Type Art. no.
MKS-KLR 38,5x33mm E832447
MKS-KLR 48x40,75mm E840447
MKS-KLR 50x58mm E850447
MKS-KLR 66,5x73mm E863447
System/Ø
Conduit system 32-63 mmMaximum operating pressure 15 bar at 20°C. With technical inspection certificate.
136
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Assembly spanner For tightening union nuts in the brass
clamping ring system
32 40 50 63
Type Art. no.
MKS-KMS 32 B800536
MKS-KMS 40 B800537
MKS-KMS 50 B800538
MKS-KMS 63 B800539
System/Ø
Tubing cutter For cutting aluminium piping
max. dia. 63 mm
Type Art. no.
RS 63 Alu D200109
Spare knife for tubing cutter 1 unit
Type Art. no.
MR-RS 63 Alu B322295
Deburring tool For deburring plastic, aluminium and
stainless steel pipes
dia. 10-54 mm
Type Art. no.
EG 54 Alu B800551
Deburring blade For deburring the inside of aluminium
pipes
Type Art. no.
EG-Alu D200603
Anti-friction agent For easy installation of compressed air
pipes
Free of silicone
Type Art. no.
GMI 65 B111015
Sticker For labelling pipelines according to VBG 1,
DIN 2403
Type Art. no.
Co
nte
nts
Dim
en-
sio
ns
(mm
)
AK-Compressed air small RL-Sy B800600 Sheet with 10 stickers 75x16
AK-Condensate B800602 Sheet with 10 stickers 75x16
Conduit system 32-63 mmAssembly aids
137
The plastic pipe system is ideal for quick, low-cost installation in applications with high air
requirements. The pipe is supplied on 50 m rolls and is therefore ideal for covering longer
distances.
Plastic pipe system 32-63 mmFlexible use
with low weight
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
138
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Polyethylene pipes Rolled pipe
50 m
Polyethylene (PE-Xb)
Colour: grey
32 40 50 63
Type Art. no.
DLR-R-PE-G 32x26,2mm/50m E832111
DLR-R-PE-G 40x32,6mm/50m E840111
DLR-R-PE-G 50x40,8mm/50m E850111
DLR-R-PE-G 63x51,4mm/50m E863111
System/Ø
Polyethylene pipes Lengths of pipe
6 m
Polyethylene (PE-Xb)
Colour: grey
32 40 50 63
Type Art. no.
DLR-S-PE-G 32x26,2mm/6m E832110
DLR-S-PE-G 40x32,6mm/6m E840110
DLR-S-PE-G 50x40,8mm/6m E850110
DLR-S-PE-G 63x51,4mm/6m E863110
System/Ø
Connection screw fitting with female thread As an air inlet for compressed air pipes
or for connecting compressed air pipes
with fittings
Screw connector/binder
Polypropylene (PP)
For compressed air pipes made of polythene
32 40 50 63
Type Art. no.
SKS-AVI 32mm x G1i E832536
SKS-AVI 40mm x G1 1/4i E840536
SKS-AVI 50mm x G1 1/2i E850537
SKS-AVI 63mm x G2i E863536
System/Ø
Connection screw fitting with male thread For connecting compressed air pipes
with fittings
Screw connector/binder
Polypropylene (PP)
For compressed air pipes made of
polythene
32 40 50 63
Type Art. no.
SKS-AVA 32mm x R1a E832535
SKS-AVA 40mm x R1 1/4a E840535
SKS-AVA 50mm x R1 1/2a E850535
SKS-AVA 50mm x R2a E850536
SKS-AVA 63mm x R2a E863535
System/Ø
Screw fitting Screw connector/binder
Polypropylene (PP)
For compressed air pipes made of
polythene
32 40 50 63
Type Art. no.
SKS-SBV 32x32 E832537
SKS-SBV 40x40 E840537
SKS-SBV 50x50 E850540
SKS-SBV 63x63 E863537
System/Ø
Angle 45° Screw connector/binder
Polypropylene (PP)
For compressed air pipes made of
polythene
32 40 50 63
Type Art. no.
SKS-W45 32x32mm E832555
SKS-W45 40x40mm E840555
SKS-W45 50x50mm E850555
SKS-W45 63x63mm E863555
System/Ø
Conduit system 32-63 mmMaximum operating pressure 13 bar at 20°C. With technical inspection certificate.
139
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Angle 90° Screw connector/binder
Polypropylene (PP)
For compressed air pipes made of
polythene
32 40 50 63
Type Art. no.
SKS-W90 32x32mm E832538
SKS-W90 40x40mm E840538
SKS-W90 50x50mm E850538
SKS-W90 63x63mm E863538
System/Ø
T-union 90° Screw connector/binder
Polypropylene (PP)
For compressed air pipes made of
polythene
32 40 50 63
Type Art. no.
SKS-TVS32x32x32mm E832539
SKS-TVS40x40x40mm E840539
SKS-TVS50x50x50mm E850539
SKS-TVS63x63x63mm E863539
System/Ø
T-union 90° with female thread on middle adapter
Screw connector/binder
Polypropylene (PP)
For compressed air pipes made of
polythene
32 40 50 63
Type Art. no.
SKS-TVS32xR3/4ix32mm E832541
SKS-TVS32xR1ix32mm E832540
SKS-TVS40xR1ix40mm E840540
SKS-TVS40xR2ix40mm E840541
SKS-TVS50xR1 1/2ix50mm E850541
SKS-TVS63xR1 1/4ix63mm E863540
SKS-TVS63xR2x63mm E863541
System/Ø
Air outlet Air outlet to compressed air consumers
Screw connector/binder
Polypropylene (PP)
For compressed air pipes made of
polythene
32 40 50 63
Type Art. no.
SKS-LAD 32-1 GES 15 E832510
SKS-LAD 32-1 GES 18 E832511
SKS-LAD 32-1 GES 22 E832509
SKS-LAD 40-1 GES 15 E840510
SKS-LAD 40-1 GES 18 E840511
SKS-LAD 40-1 GES 22 E840512
SKS-LAD 50-1 GES 15 E850510
SKS-LAD 50-1 GES 18 E850511
SKS-LAD 50-1 GES 22 E850512
SKS-LAD 63-1 GES 15 E863510
SKS-LAD 63-1 GES 18 E863511
SKS-LAD 63-1 GES 22 E863512
System/Ø
Air outlet clamp For additional air outlets on existing
pipes or if a gooseneck or direct air outlet
cannot be installed because of a lack of
space
Wall and ceiling installation
Max. operating pressure 10 bar at 20°C
A hole is drilled in the pipe. The size of the
hole matches the diameter of the hole on
the air outlet clip
Only for use with PE-Xa pipes
Type Art. no.
LAS 32 x G1/2i E832612
LAS 32 x G3/4i E832634
LAS 40 x G1/2i E840612
LAS 40 x G3/4i E840634
LAS 50 x G1/2i E850612
LAS 50 x G3/4i E850634
LAS 63 x G1/2i E863612
LAS 63 x G3/4i E863634
Conduit system 32-63 mmMaximum operating pressure 13 bar at 20°C. With technical inspection certificate.
140
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Transition screw fitting Screw connector/binder
Polypropylene (PP)
32 40 50 63
Type Art. no.
SKS-UEV32xR1/2a E832547
SKS-UEV32 x R3/4a E832548
SKS-UEV40 x R1a E840546
SKS-UEV50 x R1a E850547
SKS-UEV63 x R1a E863547
System/Ø
Dummy plug For closing off screw/clamp connectors
at end points in the pipe
32 40 50 63
Type Art. no.
SKS-BK 32 E832542
SKS-BK 40 E840542
SKS-BK 50 E850543
SKS-BK 63 E863542
System/Ø
Double nipple With external thread
Type Art. no.
SKS-DN-R1a x R1/2a G004108
SKS-DN-R1a x R3/4a G004109
SKS-DN-R1 1/4a x R3/4a G004111
Reduction fitting With external and internal thread
Type Art. no.
SKS-RDS-R3/4a x R1/2i E832546
SKS-RDS-R1a x R1/2i E840545
SKS-RDS-R1a x R3/4i E832545
SKS-RDS-R1 1/4a x R1/2i E863545
SKS-RDS-R1 1/4a x R3/4i E863546
SKS-RDS-R1 1/2a x R1/2i E850545
SKS-RDS-R1 1/2a x R3/4i E850546
Air shut-off cock For shutting off pipes or individual
sections of stub, ring or outlet pipes,
e.g. for inspection and upgrade work
Shutting off the compressed air pipes
reduces energy costs
32 40 50 63
Type Art. no.
SKS-LAH 32-2 AVI 32 E832550
SKS-LAH 40-2AVI 40 E840550
SKS-LAH 50-2AVI 50 E850550
SKS-LAH 63-2AVI 63 E863550
System/Ø
Energy-saving system Shutting off the compressed air pipes
reduces energy costs
Open slowly e.g. to fill the pipe without
generating pressure surges
Capable of performing simple control
tasks
Brass nickel-plated ball valve, hard-
chrome plated ball with Teflon coating
230 V control boxes (switching
compressed air supply on and off)
With manual actuator and control lamp
32 40 50 63
Type Art. no.
SKS-ESAT 32 SK E832565
SKS-ESAT 40 SK E840565
SKS-ESAT 50 SK E850565
SKS-ESAT 63 SK E863565
System/Ø
Conduit system 32-63 mmMaximum operating pressure 13 bar at 20°C. With technical inspection certificate.
141
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
C-spanner For tightening union nuts on plastic clamp
screw connections
32 40 63
Type Art. no.
HSL 32 K B800541
HSL 40 K B800542
HSL 50-63 K B800543
System/Ø
Pipe shears For cutting PE-Xa pipes
max. dia. 63 mm
Type Art. no.
RS 63 PE D200106
Spare knife for pipe shears 1 unit
Type Art. no.
MR-RS 63 PE B322293
Deburring tool For chamfering PE-Xa pipes
For all diameters up to 63 mm
Type Art. no.
EG 63 PE B800550
Spare cutter for deburring tool 2 units
Type Art. no.
MR-EG 63 PE B322285
Anti-friction agent For easy installation of compressed air
pipes
Free of silicone
Type Art. no.
GMI 65 B111015
Sealant Polytetrafluoroethylene sealing tape BND:
12 mm wide, 0.1 mm thick (10 reels in
pack)
Type Art. no.
BND-12mx12mm/10 E770125
Sticker For labelling pipelines according to VBG 1,
DIN 2403
Type Art. no.
Co
nte
nts
Dim
en-
sio
ns
(mm
)
AK-Compressed air small RL-Sy B800600 Sheet with 10 stickers 75x16
AK-Condensate B800602 Sheet with 10 stickers 75x16
Conduit system 32-63 mmAssembly aids
142
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Pipe clips For mounting PE-Xa pipes to walls or
suspending PE-Xa pipes from ceilings
using dowels
Quantity in pack: 25 or 10
32 40 50 63
Type Art. no.
RK32grau/25 E832425
RK40weiß/25 E840025
RK50schwarz/10 E850025
RK63grau/10 E863024
System/Ø
Fixing set Set including screws and dowels
For pipe clips
Screws 4x35 galvanised, dowel S 6
Quantity in pack: 100
Type Art. no.
BEFG 4x35,0-S6/100 B030203
Pipe clamp With M 8 thread 32 40 50 63
Type Art. no.
RSL 32-35mm E835448
RSL 40-43mm E842448
RSL 48-52mm E850448
RSL 60-64mm E863448
System/Ø
Hanger bolt With M 8 thread
Type Art. no.
SS-M 8 x 80 B030204
Conduit system 32-63 mmAssembly aids
143
Whether extremely robust braided hoses, flexible Super-Flex hoses or hard-wearing
polyurethane hoses – you are sure to find the right product for your application.
Practical accessories such as hose rewinders, power and air supply units for supplying
power and compressed air to the workplace and tractions ensure greater comfort at the
workplace and ergonomic working progress.
Hoses and workshop equipmentFor greater ergonomics
at the workplace
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
144
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Hose with fabric ply For normal conditions when using
compressed air
Colour: blue
Max. operating pressure 15 bar at 20°C
With woven fabric inlay
Quick release coupling with large air passage
Type Art. no.
Pre
ssu
re
ma
x.(b
ar)
Ext
erio
r Ø
(mm
)
Inte
rior
Ø(m
m)
Len
gth
(m)
Wit
h q
uic
k
rele
ase
cou
plin
g a
nd
p
lug
-in
nip
ple
DLS-SK 11-6/5m D740003 15 11 6 5 x
DLS-SK 11-6/10m D740004 15 11 6 10 x
DLS 11-6/25m E740003 15 11 6 25
DLS 11-6/50m E740002 15 11 6 50
DLS-SK 15-9/5m D740012 15 15 9 5 x
DLS-SK 15-9/10m D740013 15 15 9 10 x
DLS 15-9/25m E740012 15 15 9 25
DLS 15-9/50m E740011 15 15 9 50
DLS-SK 18,5-12,5/10m D750021 15 18,5 12,5 10 x
DLS 18,5-12,5/25m E740022 15 18,5 12,5 25
DLS 18,5-12,5/50m E740021 15 18,5 12,5 50
Oil-air hose with fabric ply
Extremely resistant to compressed air
containing oil
Colour: orange
Max. operating pressure 15 bar at 20°C
With woven fabric inlay
Quick release coupling with large air passage
Type Art. no.
Pre
ssu
re
ma
x.(b
ar)
Ext
erio
r Ø
(mm
)
Inte
rior
Ø(m
m)
Len
gth
(m)
Wit
h q
uic
k
rele
ase
cou
plin
g a
nd
p
lug
-in
nip
ple
DLS-SK-OA 15-9/10m D740040 15 15 9 10 x
DLS-OA 15-9/25m E740042 15 15 9 25
Superflex hose Reinforced external material with woven
fabric inlay for greater resistance to ageing
and protection against compressed air
containing oil
Extremely flexible, even at low temperatures
Colour: grey
Max. operating pressure 15 bar at 20°C
Quick release coupling with large air passage
DLS-SSK: with quick-action safety coupling
DLS-SK-ARO: with quick-action coupling
with ARO profile NW 5.5
Type Art. no.
Pre
ssu
re
ma
x.(b
ar)
Ext
erio
r Ø
(mm
)
Inte
rior
Ø(m
m)
Len
gth
(m)
Wit
h q
uic
k
rele
ase
cou
plin
g a
nd
p
lug
-in
nip
ple
DLS-SK-SF 11-6,3/5m D730030 15 11 6,3 5 x
DLS-SK-SF 11-6,3/10m D730033 15 11 6,3 10 x
DLS-SF 11-6,3/25m E730037 15 11 6,3 25
DLS-SF 11-6,3/50m E730031 15 11 6,3 50
DLS-SK-SF 15,5-10/5m D730032 15 15,5 10 5 x
DLS-SK-SF 15,5-10/10m D730031 15 15,5 10 10 x
DLS-SK-ARO-SF15,5-10-10m D732031 15 15,5 10 10 x (ARO)
DLS-SF 15,5-10/25m E730036 15 15,5 10 25
DLS-SF 15,5-10/50m E730033 15 15,5 10 50
DLS-SSK-SF 15,5-10/10m D735031 15 15,5 10 10 x (SSK)
DLS-SF 19-12,7/25m E730024 15 19 12,7 25
DLS-SF 19-12,7/50m E730023 15 19 12,7 50
DLS-SF 27-19/25m E730040 10 27 19 25
DLS-SF 27-19/50m E730041 10 27 19 50
Air hoses
145
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Hose high-pressure version
Extremely flexible, even at low
temperatures
Particularly suitable for connecting
compressed air tools
For temperature range from -15 °C to +60 °C
With reinforced polyester threads, smooth
hose core and UV-resistant outer lining
Colour: blue
High-pressure version 40 bar
With woven fabric inlay
Type Art. no.
Pre
ssu
re
ma
x.(b
ar)
Ext
erio
r Ø
(mm
)
Inte
rior
Ø(m
m)
Len
gth
(m)
DLS 40 16-9/50m E171112 40 16 9 50
DLS 40 21-13/50m E171113 40 21 13 50
Hose failure safety device Type Art. no.
SLBS 3/8 E700231
SLBS 1/2 E700232
Cuts off the compressed air supply when
a hose bursts so that the hose will not
thrash around
No risk of injury or damage to material
One condition is that dryers and filters are
installed to purify the air
Fitted between pipeline and dead-end
distribution box
Wall hose holder Type Art. no.
WH-WSH E104002
Creates a tidy working area and eliminates
the hazard of hoses lying around
Robust plastic version. Also suitable for
heavy-duty hoses
Additional hook for hanging tools, small
parts, etc.
Polyamide hose Largely resistant to oil, grease, acid,
salt and leach
Applications: measuring and control
technology, laboratories, welding technology
and for smaller compressed air tools and
spray guns
Narrow wall thickness yet extremely
pressure-resistant
For temperature range from -40 °C to +80 °C
Corresponds to DIN 73378
Colour: blue
Polyamide (PA)
Type Art. no.
Pre
ssu
re
ma
x.(b
ar)
Ext
erio
r Ø
(mm
)
Inte
rior
Ø(m
m)
Len
gth
(m)
DLS-PA 6-4/50m E111131 27 6 4 50
DLS-PA 8-6/50m E111141 19 8 6 50
DLS-PA 10-8/50m E111151 15 10 8 50
Polythene hose Ideal for all pneumatic control systems
Flexible and impact-resistant, low weight
For temperature range from -10 °C to +60 °C
Colour: blue
Suitable for screw connection series
A / Fox
Polythene (PE-Xb)
Type Art. no.
Pre
ssu
re
ma
x.(b
ar)
Ext
erio
r Ø
(mm
)
Inte
rio
r Ø
(mm
)
Len
gth
(m)
DLS-PE 6-4/50m E094131 12 6 4 50
DLS-PE 8-6/50m E094141 8 8 6 50
DLS-PE 10-8/50m E094151 6 10 8 50
Air hoses
146
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Polyurethane hose Ideal pneumatic hose within normal
temperature range
Ability to return to original size, even after
sustained periods of pressure
Extremely resistant to wear, flexible at low
temperatures, resistant to ruptures
Operating pressure at 20 °C
Colour: blue
Suitable for screw connection series
A / Fox
Polyurethane (PUR)
Type Art. no.
Pre
ssu
re
ma
x.(b
ar)
Ext
erio
r Ø
(mm
)
Inte
rior
Ø(m
m)
Len
gth
(m)
DLS-PUR 6-4/50m E095131 12 6 4 50
DLS-PUR 8-6/50m E095141 9,5 8 6 50
DLS-PUR 10-8/50m E095151 7 10 8 50
Hose/Pipe cutter Type Art. no.
ROS 14 PA D200100
Ideal for cutting hoses with a maximum
external dia. of 14 mm
Polyamide spiral hose With quick release coupling and plug-in nozzle
Colour: blue
Max. operating pressure 8 bar at 20 °C
Polyamide (PA)
Connections with swivel joints (excluding
D770133)
Type Art. no.P
ress
ure
m
ax.
(ba
r)
Ext
erio
r Ø
(mm
)
Inte
rior
Ø(m
m)
Work
ing
le
ng
th(m
)
Dev
elop
ed
len
gth
(m)
SSL-SK-PA 8-6/5m D770133 8 8 6 2,5 5
SSL-SK-PA 8-6/7,5m D770131 8 8 6 4 7,5
SSL-SK-PA 10-8/10m D770132 8 10 8 6 10
Polyurethane spiral hose Highly resistant to abrasion and elastic
No scratches on painted parts
No restricted hose sections caused by
kinking
Small winding diameter
With straight hose connection
Connections with swivel joints
Max. operating pressure 8 bar at 20 °C
Temperature range –40 °C to +85 °C
Polyurethane (PUR)
With quick release coupling and plug-in
nozzle (rotating)
Type Art. no.
Pre
ssu
re
ma
x.(b
ar)
Ext
erio
r Ø
(mm
)
Inte
rior
Ø(m
m)
Work
ing
le
ng
th(m
)
Dev
elop
ed
len
gth
(m)
Ma
ins
sup
ply
SSL-SK-PUR 10-6,5/6m D770136 8 10 6,5 4,8 6 R 1/4 ̋
SSL-SK-PUR 10-6,5/7,5m D770137 8 10 6,5 6 7,5 R 1/4 ̋
SSL-SK-PUR 12-8/6m D770138 8 12 8 4,8 6 R 3/8 ̋
SSL-SK-PUR 12-8/7,5m D770139 8 12 8 6 7,5 R 3/8 ̋
Air hoses
147
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Polyurethane spiral hose Highly resistant to abrasion and elastic
No scratches on painted parts
No restricted hose sections caused by
kinking
Small winding diameter
With straight hose connection
Connections with swivel joints
Max. operating pressure 8 bar at 20 °C
Temperature range –40 °C to +85 °C
Polyurethane (PUR)
With threaded screw connections
(rotating)
Type Art. no.
Pre
ssu
re
ma
x.(b
ar)
Ext
erio
r Ø
(mm
)
Inte
rior
Ø(m
m)
Work
ing
le
ng
th(m
)
Dev
elop
ed
len
gth
(m)
Ma
ins
sup
ply
SSL-PUR 10-6,5/6m E038704 8 10 6,5 4,8 6 R 1/4 ̋
SSL-PUR 10-6,5/7,5m E038705 8 10 6,5 6 7,5 R 1/4 ̋
SSL-PUR 12-8/6m E038105 8 12 8 4,8 6 R 3/8 ̋
SSL-PUR 12-8/7,5m E038106 8 12 8 6 7,5 R 3/8 ̋
Hose rewinder, manual With plug nipple
Super Flex hose: extremely flexible, even at
low temperatures
Double distributor with 2 quick release couplings
Can be unrolled in a vertical or horizontal position
With guide and hose holder
Unrolling stop
Max. operating pressure 15 bar at 20°C
Type Art. no.
Pre
ssu
re
ma
x.(b
ar)
Ext
erio
r Ø
(mm
)
Inte
rior
Ø(m
m)
Len
gth
(m)
Wei
gh
t(k
g)
SLA 9 D312530 15 15,5 10 20 4,3
Hose rewinder, manual Large internal dia. of 10 mm for a high air flow
rate. Virtually no pressure losses
The 360° rotary base prevents the roller from
tipping over when unrolling
Swivel joint on the air inlet hose
Steel pipe holder provides all-round protection
Polyurethane compressed air hose
Retractable crank handle
With quick release coupling and plug-in nozzle
Max. operating pressure 15 bar at 20°C
Type Art. no.
Pre
ssu
re
ma
x.(b
ar)
Ext
erio
r Ø
(mm
)
Inte
rior
Ø(m
m)
Len
gth
(m)
Wei
gh
t(k
g)
SLA 10 D312540 15 14,5 10 20 7,2
Hose rewinder, automatic
Automatic
With PU (SLA 8 A) or PVC (SLA 9 A + 10 A)
air hose with woven fabric inlay
Standard features include: quick release coup-
ling and connecting hose with plug nipple
Standard features include: swivelling
U-bracket and hose locking device
For wall mounting
Plastic housing
Max. operating pressure 15 bar at 20°C
Type Art. no.
Pre
ssu
re
ma
x.(b
ar)
Ext
erio
r Ø
(mm
)
Inte
rio
r Ø
(mm
)
Ext
end
ab
le
len
gth
Wei
gh
t(k
g)
SLA 8 A D312511 15 13 8 10+1 4,3
SLA 9 A D312514 15 13 8 15+1 7,3
SLA 10 A D312503 15 15,5 10 12+1 8,8
Air hoses
148
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Hose rewinder, automatic
Automatic
Special flexible soft hose with quick release
coupling for convenient working
Hose locking device
Air inlet via hose nozzle with swivel joint
Suitable for wall mounting and ceiling
suspension
With robust metal casing
Type Art. no.
Pre
ssu
re
ma
x.(b
ar)
Ext
erio
r Ø
(mm
)
Inte
rior
Ø(m
m)
Ext
end
ab
le
len
gth
Wei
gh
t(k
g)
SLA 1212 A D312537 15 19,5 12,7 15 10,8
Spring balancer with hose For all types of portable device and tool up to
2.5 kg in weight
With PUR hose 6 x 1 mm
Robust aluminium casing
Max. operating pressure 8 bar at 50 °C
Air flow 370 l/min., pressure difference
0.5 bar
Rubber stop at the end
Connecting hose approx. 0.4 m, R 1/4 ̋a
on both sides
Type Art. no.
Ca
rryi
ng
p
ow
er(k
g)
Str
ok
e le
ng
th(m
)
Wei
gh
t(k
g)
FZS 1 D070012 0,4 – 0,8 1,4 1,25
FZS 2 D070013 0,8 – 1,5 1,4 1,30
FZS 3 D070014 1,2 – 2,5 1,4 1,35
Spring balancer For all types of portable device and tool
Compact, with robust aluminium
housing
Easy to adjust
Cable exits from below
Rubber stop at the end
Type Art. no.
Ca
rryi
ng
p
ow
er(k
g)
Str
ok
e le
ng
th(m
)
Wei
gh
t(k
g)
FZ 0,4-1 D070015 0,4 – 1,0 1,6 0,63
FZ 1-2 D070016 1,0 – 2,0 1,6 0,67
FZ 2-3 D070017 2,0 – 3,0 1,6 0,79
Spring balancer For all types of portable device and tool
Compact, with robust aluminium
housing
Easy to adjust
Cable exits from below
Rubber stop at the end
Type Art. no.
Ca
rryi
ng
p
ow
er(k
g)
Str
ok
e le
ng
th(m
)
Wei
gh
t(k
g)
FZ 2-4 D070018 2,0 – 4,0 2,5 2,85
FZ 4-6 D070019 4,0 – 6,0 2,5 3,00
FZ 6-8 D070020 6,0 – 8,0 2,5 3,10
Air hoses
149
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Power and air supply unit
Common features Ideal for workplaces where compressed air
and electricity are both used regularly
Dust and splash water protection in
accordance with IP 44 (approved for wood
processing applications)
Preassembled electric cable (H 07 RN), length
5 m for easy connection to the power supply
Suspension spring for convenient use
Air connected via 13 mm hose nozzle
Working pressure up to 15 bar
Compressed air connections with safety
couplings. No risk of accident because the
couplings prevent the hose from sliding out
when disconnected
Type Art. no.
Sch
uk
o
pow
er
ou
tlet
s 16A
/230V
(pie
ce(s
))
Cek
on
p
ow
er
ou
tlet
s 16A
/400V
(pie
ce(s
))
Pre
ssu
re
red
uce
r(p
iece
(s))
Filt
er
pre
ssu
re
red
uce
r &
m
ist
oiler
(pie
ce(s
))
Com
-p
ress
ed a
ir
con
nec
tion
s
Wei
gh
t(k
g)
EA 4 D100028 4 - - - 2 2,9
EA 4/ DM D100029 4 - 1 - 2 3,7
EA 3/1 D100030 3 1 - - 2 3,4
EA 3/1 WE D100031 3 1 - 1 2+1 5,5
Air hoses
150
Select compatible connection and joining products from our diverse selection of different
quick-release couplings, plug nipples, screw fittings and hose nozzles manufactured from a
range of materials.
Connecting and joining technologyFor all types of
connection
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
151
Safety and a high degree of operating comfort –
high-quality steel couplings
Full power at high flow rate
(1900 l/min)
Full power at very high flow rate
(2100 l/min)
Flange prevents coupling
from opening
Simple operation same coupling
movement as current
standard couplings
Low coupling force64.0 N
Low coupling force70.7 N
Extended service life because steel body and
sleeve are tempered and
galvanised
Safety quick-release coupling Steel quick-release coupling
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Quick release safety couplingsCommon features European standard profile
Nominal width 7.6 for high air flow rate
Flow capacity 1900 l/min
Highly abrasion-proof, extremely robust
Long service life
Very simple to operate – coupling movement is the same as
conventional standard couplings
Low coupling force: 64.0 N
Body and sleeve made of hardened, galvanised steel
Max. operating pressure 16 bar, temperature range -20 °C to +80 °C
Corresponds to standard DIN EN ISO 4414 and DIN EN 983
Free of silicone
Safety quick-release couplings with male thread Type Art. no.
SSK-NW7,6-EURO-G1/4a E036911
SSK-NW7,6-EURO-G3/8a E036912
SSK-NW7,6-EURO-G1/2a E036913
Hardened and galvanised steel
NW 7.6
Such a function can only be guaranteed
in conjunction with hardened steel plug
nipples
Safety quick-release couplings with female thread Type Art. no.
SSK-NW7,6-EURO-G1/4i E036914
SSK-NW7,6-EURO-G3/8i E036915
SSK-NW7,6-EURO-G1/2i E036916
Hardened and galvanised steel
NW 7.6
Such a function can only be guaranteed
in conjunction with hardened steel plug
nipples
Safety quick-release couplings hose nozzle Type Art. no.
SSK-NW7,6-EURO-6mm E036917
SSK-NW7,6-EURO-9mm E036918
SSK-NW7,6-EURO-13mm E036919
Hardened and galvanised steel
NW 7.6
Such a function can only be guaranteed
in conjunction with hardened steel plug
nipples
152
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Quick-release couplings made of hardened steelCommon features European standard profile
Nominal width 7.6 for high air flow rate
Flow capacity 2100 l/min
Highly abrasion-proof, extremely robust
Long service life
Flanging prevents unintended opening of the coupling when,
for example, it is pulled across the floor
Low coupling force: 70.7 N
Body and sleeve made of hardened, galvanised steel
Max. operating pressure 16 bar, temperature range -20 °C to +100 °C
Free of silicone
Quick-release couplings with male thread Type Art. no.
SK-FE-NW7,6-EURO-G1/4a E033401
SK-FE-NW7,6-EURO-G3/8a E033402
SK-FE-NW7,6-EURO-G1/2a E033403
Hardened and galvanised steel
NW 7.6
Such a function can only be guaranteed
in conjunction with hardened steel plug
nipples
Quick-release couplings with female thread Type Art. no.
SK-FE-NW7,6-EURO-G1/4i E033404
SK-FE-NW7,6-EURO-G3/8i E033405
SK-FE-NW7,6-EURO-G1/2i E033406
Hardened and galvanised steel
NW 7.6
Such a function can only be guaranteed
in conjunction with hardened steel plug
nipples
Quick-release couplings with hose nozzle Type Art. no.
SK-FE-NW7,6-EURO-6mm E033407
SK-FE-NW7,6-EURO-9mm E033408
SK-FE-NW7,6-EURO-13mm E033409
Hardened and galvanised steel
NW 7.6
Such a function can only be guaranteed
in conjunction with hardened steel plug
nipples
Steel plug nipple with external thread Type Art. no.
STNP-FE-NW7,6-EURO-G1/4a E033241
STNP-FE-NW7,6-EURO-G3/8a E033242
STNP-FE-NW7,6-EURO-G1/2a E033243
European standard profile
Nominal width 7.6 for high air flow rate
Highly abrasion-proof, extremely robust
Long service life
Hardened and galvanised steel
Max. operating pressure 16 bar,
temperature range -20 °C to +100 °C
Steel plug nipple with internal thread Type Art. no.
STNP-FE-NW7,6-EURO-G1/4i E033244
STNP-FE-NW7,6-EURO-G3/8i E033245
STNP-FE-NW7,6-EURO-G1/2i E033246
European standard profile
Nominal width 7.6 for high air flow rate
Highly abrasion-proof, extremely robust
Long service life
Hardened and galvanised steel
Max. operating pressure 16 bar,
temperature range -20 °C to +100 °C
Steel plug nipple with hose nozzle Type Art. no.
STNP-FE-NW7,6-EURO-6mm E033247
STNP-FE-NW7,6-EURO-9mm E033248
STNP-FE-NW7,6-EURO-13mm E033249
European standard profile
Nominal width 7.6 for high air flow rate
Highly abrasion-proof, extremely robust
Long service life
Hardened and galvanised steel
Max. operating pressure 16 bar,
temperature range -20 °C to +100 °C
Screw fittings and brass parts
153
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Quick-release couplings with male thread Brass
NW 7.2
Type Art. no.
SK-NW7,2-G1/4a E700001
SK-NW7,2-G3/8a E700002
SK-NW7,2-G1/2a E700003
Quick-release couplings with female thread Brass
NW 7.2
Type Art. no.
SK-NW7,2-G1/4i E700004
SK-NW7,2-G3/8i E700005
SK-NW7,2-G1/2i E700006
Quick-release couplings with hose nozzle Brass
NW 7.2
With nozzle for hose dia.
Type Art. no.
SK-NW7,2-6mm E700007
SK-NW7,2-9mm E700008
SK-NW7,2-13mm E700209
Quick-release coupling for plastic hose Brass
NW 7.2
Type Art. no.
SK-NW7,2-8x6mm E031143
SK-NW7,2-12x9mm E031145
Quick-release coupling for plastic hose Brass
NW 7.2
With antikink spring
Type Art. no.
SK-NW7,2-8x6mm-KF E031153
SK-NW7,2-12x9mm-KF E031155
Distributor with quick-release couplings Quick-release brass couplings
NW 7.2 for air flow rate up to 1100 l/min.
at 6 bar, pressure difference 0.5 bar
With 2 connections (VT 2)
With 3 connections (VT 3)
Type Art. no.
VT 2 G3/8i-2xSK E700120
VT 2 G3/8i-3xSK E700121
Distributor without quick-release couplings Large version
Brass
With internal thread
With 2 connections (VT 2)
With 3 connections (VT 3)
Type Art. no.
VT 2 3xG3/8i E035833
VT 2 3xG1/2i E035834
VT 3 4xG3/8i E035733
VT 3 4xG1/2i E035734
Screw fittings and brass parts
154
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Plug nipple with male thread Brass
NW 7.2
Type Art. no.
STNP-MS-NW7,2-G1/8a E031201
STNP-MS-NW7,2-G1/4a E700213
STNP-MS-NW7,2-G3/8a E700214
STNP-MS-NW7,2-G1/2a E700215
Plug nipple with female thread Brass
NW 7.2
Type Art. no.
STNP-MS-NW7,2-G1/8i E031231
STNP-MS-NW7,2-G1/4i E700216
STNP-MS-NW7,2-G3/8i E700217
STNP-MS-NW7,2-G1/2i E700218
Plug nipple with hose nozzle Brass
NW 7.2
With nozzle for hose dia.
Type Art. no.
STTL 4mm E031360
STNP-MS-NW7,2-6mm E700010
STNP-MS-NW7,2-9mm E700011
STNP-MS-NW7,2-13mm E700212
Plug nipple with hose nozzle Brass
NW 7.2
For plastic hose
Type Art. no.
STTL-K 4mm E031342
STTL-K 6mm E031343
STTL-K 9mm E031345
Plug nipple with hose nozzle NW 7.2
Brass
For plastic hose
With antikink spring
Type Art. no.
STTL-KF 6mm E031353
STTL-KF 9mm E031355
Screw fittings and brass parts
155
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Mini quick-action coupling with external thread With external thread
Brass
NW 5
Type Art. no.
SK-NW5-G1/8a-mini E032101
SK-NW5-G1/4a-mini E032102
Mini quick-action coupling with internal thread With internal thread
Brass
NW 5
Type Art. no.
SK-NW5-G1/8i-mini E032131
SK-NW5-G1/4i-mini E032132
Mini quick-action coupling with hose nozzle With nozzle for hose dia.
Brass
NW 5
Type Art. no.
SK-NW5-4mm-mini E032160
SK-NW5-6mm-mini E032161
SK-NW5-9mm-mini E032162
Mini quick-action coupling for plastic hose For plastic hose
Brass
NW 5
Type Art. no.
SK-NW5-6x4mm-mini E032142
SK-NW5-8x6mm-mini E032143
Mini plug nipple with external thread With external thread
Type Art. no.
STNP-MS-NW5-G1/8a-mini E032201
STNP-MS-NW5-G1/4a-mini E032202
Mini plug nipple with internal thread With internal thread
Type Art. no.
STNP-MS-NW5-G1/8i-mini E032231
STNP-MS-NW5-G1/4i-mini E032232
Mini plug nipple with hose nozzle With nozzle for hose dia.
Type Art. no.
STTL-4mm-mini E032360
STTL-6mm-mini E032361
STTL-9mm-mini E032362
Mini plug nipple with hose nozzle For plastic hose
Type Art. no.
STTL-6x4mm-mini E032342
STTL-8x6mm-mini E032343
Screw fittings and brass partsCoupling system Mini
156
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Quick-release couplings with male thread With external thread
Brass
NW 5,5
Profile ARO/Orion
Type Art. no.
SK-NW5,5-ARO-G1/4a E032701
SK-NW5,5-ARO-G3/8a E032702
SK-NW5,5-ARO-G1/2a E032703
Quick-release couplings with female thread With internal thread
Brass
NW 5,5
Profile ARO/Orion
Type Art. no.
SK-NW5,5-ARO-G1/4i E032704
SK-NW5,5-ARO-G3/8i E032705
SK-NW5,5-ARO-G1/2i E032706
Quick-release couplings with hose nozzle With nozzle for hose dia.
Brass
NW 5,5
Profile ARO/Orion
Type Art. no.
SK-NW5,5-ARO-6mm E032707
SK-NW5,5-ARO-9mm E032708
SK-NW5,5-ARO-13mm E032709
Plug nipple with male thread With external thread
NW 5,5
Profile ARO/Orion
Type Art. no.
STNP-NW5,5-ARO-G1/4a E032721
STNP-NW5,5-ARO-G3/8a E032722
STNP-NW5,5-ARO-G1/2a E032723
Plug nipple with female thread With internal thread
NW 5,5
Profile ARO/Orion
Type Art. no.
STNP-NW5,5-ARO-G1/4i E032724
STNP-NW5,5-ARO-G3/8i E032725
STNP-NW5,5-ARO-G1/2i E032726
Plug nipple with hose nozzle With nozzle for hose dia.
NW 5,5
Profile ARO/Orion
Type Art. no.
STNP-NW5,5-ARO-6mm E032727
STNP-NW5,5-ARO-9mm E032728
STNP-NW5,5-ARO-13mm E032729
Screw fittings and brass partsProfile ARO/Orion
157
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Quick-release couplings with male thread With external thread
Brass
NW 5,5
ISO profile
Type Art. no.
SK-NW5,5-ISO-G1/4a E032811
SK-NW5,5-ISO-G3/8a E032812
SK-NW5,5-ISO-G1/2a E032813
Quick-release couplings with female thread With internal thread
Brass
NW 5,5
ISO profile
Type Art. no.
SK-NW5,5-ISO-G1/4i E032814
SK-NW5,5-ISO-G3/8i E032815
SK-NW5,5-ISO-G1/2i E032816
Quick-release couplings with hose nozzle With nozzle for hose dia.
Brass
NW 5,5
ISO profile
Type Art. no.
SK-NW5,5-ISO-6mm E032817
SK-NW5,5-ISO-9mm E032818
SK-NW5,5-ISO-13mm E032819
Plug nipple with male thread With external thread
NW 5,5
ISO profile
Type Art. no.
STNP-NW5,5-ISO-R1/4a E032821
STNP-NW5,5-ISO-R3/8a E032822
STNP-NW5,5-ISO-R1/2a E032823
Plug nipple with female thread With internal thread
NW 5,5
ISO profile
Type Art. no.
STNP-NW5,5-ISO-G1/4i E032824
STNP-NW5,5-ISO-G3/8i E032825
STNP-NW5,5-ISO-G1/2i E032826
Plug nipple with hose nozzle With nozzle for hose dia.
NW 5,5
ISO profile
Type Art. no.
STNP-NW5,5-ISO-6mm E032827
STNP-NW5,5-ISO-9mm E032828
STNP-NW5,5-ISO-13mm E032829
Screw fittings and brass partsISO profile
158
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Hose nozzle with male thread Brass
Type Art. no.
STL-G1/8a x 4mm E770022
STL-G1/8a x 6mm E770023
STL-G1/4a x 4mm E770024
STL-G1/4a x 6mm E770225
STL-G1/4a x 9mm E770226
STL-G3/8a x 6mm E770227
STL-G3/8a x 9mm E770228
STL-G3/8a x 13mm E770229
STL-G1/2a x 6mm E770230
STL-G1/2a x 9mm E770231
STL-G1/2a x 13mm E770232
STL-G3/4a x 13mm E770033
STL-G3/4a x 19mm E770034
Hose nozzle with female thread Brass
Type Art. no.
STL-G1/4i x 6mm E770235
STL-G1/4i x 9mm E770236
STL-G3/8i x 6mm E770237
STL-G3/8i x 9mm E770238
STL-G1/2i x 9mm E770241
STL-G1/2i x 13mm E770242
Hose nozzle Hose connecting tube
Brass
Type Art. no.
SLVR 4mm E770049
SLVR 6mm E770250
SLVR 9mm E770251
SLVR 13mm E770052
Hose clamp Steel
Galvanised and polished with 2 profiled
lugs, no sharp, protruding parts
Range 7 mm
Type Art. no.
SLK 11-13mm E770210
SLK 13-15mm E770211
SLK 15-18mm E770212
Terminal screw Steel
Galvanised and polished
Worm thread for cross-head screw, 7 mm
Range 9 mm
Type Art. no.
SRK 8-12mm E131012
SRK 10-16mm E770215
SRK 12-20mm E770216
SRK 16-25mm E770217
SRK 20-32mm E770218
SRK 25-40mm E131040
SRK 32-50mm E131050
Screw fittings and brass parts
159
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Double nipple Galvanised steel
With internal cone
Type Art. no.
DN-St-G1/4a x G1/4a E770256
DN-St-G3/8a x G3/8a E770258
DN-St-G1/2a x G1/2a E770260
DN-St-G1/4a x G1/8a E770255
DN-St-G3/8a x G1/4a E770257
DN-St-G1/2a x G1/4a E770288
DN-St-G1/2a x G3/8a E770259
Double nipple Brass
With internal cone
Type Art. no.
DN-MS-G1/8a x G1/8a E030111
DN-MS-G1/4a x G1/4a E030122
DN-MS-G3/8a x G3/8a E030133
DN-MS-G1/2a x G1/2a E030144
DN-MS-G3/4a x G3/4a E030155
DN-MS-G1a x G1a E030166
DN-MS-G1/8a x G1/4a E030112
DN-MS-G1/8a x G3/8a E030113
DN-MS-G1/4a x G3/8a E030123
DN-MS-G1/4a x G1/2a E030124
DN-MS-G3/8a x G1/2a E030134
DN-MS-G3/8a x G3/4a E030135
DN-MS-G1/2a x G3/4a E030145
DN-MS-G1/2a x G1a E030146
DN-MS-G3/4a x G1a E030156
Double nipple Brass
With conical thread
Type Art. no.
DN-MS-R1/8a x R1/8a E030011
DN-MS-R1/4a x R1/4a E030022
DN-MS-R3/8a x R3/8a E030033
DN-MS-R1/2a x R1/2a E030044
DN-MS-R3/4a x R3/4a E030045
Double nipple Brass
Detachable
Conical seal
Type Art. no.
DNL-MS-R1/8a x R1/8a E030048
DNL-MS-R1/8a x R1/4a E030049
DNL-MS-R1/4a x R1/4a E030052
DNL-MS-R1/4a x R3/8a E030053
DNL-MS-R3/8a x R3/8a E030054
DNL-MS-R1/2a x R1/2a E030055
DNL-MS-R3/4a x R3/4a E030056
DNL-MS-R1a x R1a E030057
Screw fittings and brass parts
160
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Double nipple Nickel-plated
With cylindrical external thread
Type Art. no.
DN-NI-G1/8a x G1/8a E041111
DN-NI-G1/4a x G1/4a E041122
DN-NI-G3/8a x G3/8a E041133
DN-NI-G1/2a x G1/2a E041144
DN-NI-G3/4a x G3/4a E041155
DN-NI-G1/8a x G1/4a E041112
DN-NI-G1/8a x G3/8a E041113
DN-NI-G1/4a x G3/8a E041123
DN-NI-G1/4a x G1/2a E041124
DN-NI-G3/8a x G1/2a E041134
DN-NI-G1/2a x G3/4a E041145
Reduction fitting Brass
With external and internal thread
Type Art. no.
RDS-G1/4a x G1/8i E770265
RDS-G3/8a x G1/8i E770061
RDS-G3/8a x G1/4i E770266
RDS-G1/2a x G1/8i E770062
RDS-G1/2a x G1/4i E770063
RDS-G1/2a x G3/8i E770267
RDS-G3/4a x G3/8i E770064
RDS-G3/4a x G1/2i E770077
RDS-G1a x G1/2i E770078
RDS-G1 x G3/4i E770079
RDS-G1 1/4a x G1/2i E770095
RDS-G1 1/4a x G3/4i E770096
RDS-G1 1/2a x G1i E770093
RDS-G2a x G1i E770094
Reduction fitting Nickel-plated
Conical external thread
Cylindrical internal thread
Type Art. no.
RDS-R1/4a x G1/8i E041221
RDS-R3/8a x G1/4i E041232
RDS-R1/2a x G3/8i E041243
RDS-R3/4a x G1/2i E041254
Reducing nipple Brass
With external and internal thread
Type Art. no.
RDN-G1/8a x G1/8i E770080
RDN-G1/8a x G1/4i E770081
RDN-G1/4a x G1/8i E770082
RDN-G1/4a x G1/4i E770083
RDN-G1/4a x G3/8i E770268
RDN-G3/8a x G1/4i E770084
RDN-G3/8a x G3/8i E770085
RDN-G3/8a x G1/2i E770269
RDN-G1/2a x G3/8i E770086
RDN-G1/2a x G1/2i E770087
RDN-G1/2a x G3/4i E770275
Screw fittings and brass parts
161
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Reducing nipple Nickel-plated
With external and internal thread
Cylindrical external thread
Type Art. no.
RDN-G1/4a x G1/8i E041312
RDN-G1/4a x G3/8i E041323
RDN-G1/2a x G3/8i E041334
Reducing nipple Malleable cast iron
2 internal threads
Type Art. no.
RDN-TG-G1i x G1/2i G017010
RDN-TG-G1i x G1/2a G017088
RDN-TG-G1 1/4i x G3/4i G017011
Reducing nipple Nickel-plated
Rotary
With external and internal thread
Type Art. no.
DRN-G1/8a x G1/8i E023411
DRN-G1/4a x G1/4i E023422
DRN-G3/8a x G3/8i E023433
Sleeves Brass
Type Art. no.
MU-MS-G1/8i E770076
MU-MS-G1/4i E770270
MU-MS-G3/8i E770271
MU-MS-G1/2i E770272
MU-MS-G3/4i E770073
MU-MS-G1i E770074
Sleeves Nickel-plated
Type Art. no.
MU-NI-G1/8i E041411
MU-NI-G1/4i E041422
MU-NI-G3/8i E041433
MU-NI-G1/2i E041444
Locking screw Brass
With internal hexagonal bolt
Cylindrical external thread
Type Art. no.
VSS-MS-I-B-G1/8a E030510
VSS-MS-I-B-G1/4a E030520
VSS-MS-I-B-G3/8a E030530
VSS-MS-I-B-G1/2a E030540
VSS-MS-I-B-G3/4a E030550
VSS-G1/2a G432011
Locking screw Brass
With internal hexagonal bolt
Conical external thread
Knurled thread
Type Art. no.
VSS-MS-I-R1/8a E030501
VSS-MS-I-R1/4a E030502
VSS-MS-I-R3/8a E030503
Screw fittings and brass parts
162
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Locking screw Steel
With internal hexagonal bolt
Conical external thread
Knurled thread
Type Art. no.
VSS-ST-I-R1/2a G205208
VSS-ST-I-R3/4a G205216
Locking screw Nickel-plated
Hexagonal bolt
Type Art. no.
VSS-NI-AS-G1/8a E041510
VSS-NI-AS-G3/8a E041530
VSS-NI-AS-G1/2a E041540
Bracket Brass
2 external threads
With internal cone
Type Art. no.
WKS-MS 90-2xR1/8a E030611
WKS-MS 90-2xR1/4a E030622
WKS-MS 90-2xR3/8a E030633
WKS-MS 90-2xR1/2a E030644
Bracket Nickel-plated brass
1 external, 1 internal thread
Type Art. no.
WKS-W90-R1/8axG1/8i E041611
WKS-W90-R1/4axG1/4i E041622
WKS-W90-G3/8axR3/8i E041633
WKS-W90-R1/2axG1/2i E041644
WKS-W90-R3/4axG3/4i E041655
Bracket Nickel-plated brass
2 internal threads
Type Art. no.
WKS-W90-NI 2xG1/8i E041711
WKS-W90-NI 2xG1/4i E041722
WKS-W90-NI 2xG3/8i E041733
WKS-W90-NI 2xG1/2i E041744
Bracket Brass
2 internal threads
Large version
Type Art. no.
WKS-W90 2x G 1/4i MS E039137
WKS-W90 2x G 3/8i MS E039139
WKS-W90 2x G 1/2i MS E039141
WKS-W90 2x G 3/4i MS E039143
WKS-W90 2x G1i MS E039145
T-piece Brass
3 internal threads
Large version
Type Art. no.
TSK-MS 90-3xG1/8i E039008
TSK-MS 90-3xG1/4i E039010
TSK-MS 90-3xG3/8i E039012
TSK-MS 90-3xG1/2i E039014
TSK-MS 90-3xG3/4i E039016
TSK-MS 90-3xG1i E039018
Screw fittings and brass parts
163
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
T-piece Nickel-plated brass
3 internal threads
Type Art. no.
TSK-NI 3xG1/8i E042111
TSK-NI 3xG1/4i E042122
TSK-NI 3xG3/8i E042133
TSK-NI 3xG1/2i E042144
T-piece Nickel-plated brass
1 external, 2 internal threads
Type Art. no.
TSK-MS 1xR1/8a-2xG1/8i E041911
TSK-MS 1xR1/4a-2xG1/4i E041922
TSK-MS 1xR3/8a-2xG3/8i E041933
TSK-MS 1xR1/2a-2xG1/2i E041944
T-piece Brass
3 external threads
With internal cone
Type Art. no.
TSK-MS 90-3xR1/8a E030811
TSK-MS 90-3xR1/4a E030822
TSK-MS 90-3xR3/8a E030833
TSK-MS 90-3xR1/2a E030844
T-piece Nickel-plated brass
3 external threads
Type Art. no.
TSK-NI 90-3xR1/8a E041811
TSK-NI 90-3xR1/4a E041822
TSK-NI 90-3xR3/8a E041833
TSK-NI 90-3xR1/2a E041844
Y-piece Nickel-plated brass
1 external, 2 internal threads
Type Art. no.
YS-NI 1xR1/4a-2xG1/4i E042222
YS-NI 1xR3/8a-2xG3/8i E042233
YS-NI 1xR1/2a-2xG1/2i E042244
Y-piece Nickel-plated brass
3 internal threads
Type Art. no.
YS-NI 3xG1/4i E042592
YS-NI 3xG3/8i E042593
YS-NI 3xG1/2i E042594
Crossjoint Aluminium
4 internal threads
Type Art. no.
KZS-Alu 4 x G1/8i E023311
KZS-Alu 4 x G1/4i E023322
VRB-Alu 4 x G3/8i E023333
KZS-Alu 4 x G1/2i E023344
Screw fittings and brass parts
164
The screw fittings from the A series are particularly quick and easy to fit – the hoses or pipes
are retained in position on the guide cone and can be tightened with one twist of the hand,
saving you time and money.
Screw fittings series AParticularly robust
and temperature-resistant
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
165
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
Straight screwed coupling A 11
With cylindrical external thread
Type Art. no.
Hose
D/d
G NW
D1
L L1 SW
SW
1
GESV-NI 6-4xG1/8a E021131 6/4 1/8 ̋ 3,3 11,5 18,5 6,0 13 10
GESV-NI 6-4xG1/4a E021132 6/4 1/4 ̋ 3,3 11,5 19,0 8,0 17 10
GESV-NI 6-4xG3/8a E021133 6/4 3/8 ̋ 3,3 11,5 19,0 9,0 19 15
GESV-NI 8-6xG1/8a E021141 8/6 1/8 ̋ 5,3 13,5 18,5 6,0 13 12
GESV-NI 8-6xG1/4a E021142 8/6 1/4 ̋ 5,3 13,5 19,0 8,0 17 12
GESV-NI 8-6xG3/8a E021143 8/6 3/8 ̋ 5,3 13,5 19,0 9,0 19 12
GESV-NI 8-6xG1/2a E021144 8/6 1/2 ̋ 5,3 13,5 19,5 10,0 24 12
GESV-NI 10-8xG1/4a E021152 10/8 1/4 ̋ 7,0 15,5 20,5 8,0 17 13
GESV-NI 10-8xG3/8a E021153 10/8 3/8 ̋ 7,0 15,5 20,5 9,0 19 13
GESV-NI 10-8xG1/2a E021154 10/8 1/2 ̋ 7,0 15,5 21,0 10,0 24 13
Straight female stud coupling A 13
With internal thread
Type Art. no.
Hose
D/d
G NW
D D1
L L1 SW
GAVS-NI 6-4xG1/8i E021331 6/4 1/8 ̋ 3,3 5,5 11,5 24,0 8,0 13
GAVS-NI 6-4xG1/4i E021332 6/4 1/4 ̋ 3,3 5,5 11,5 26,5 10,5 17
GAVS-NI 8-6xG1/8i E021341 8/6 1/8 ̋ 5,3 5,5 13,5 24,0 8,0 13
GAVS-NI 8-6xG1/4i E021342 8/6 1/4 ̋ 5,3 5,5 13,5 26,5 10,5 17
GAVS-NI 8-6xG3/8i E021343 8/6 3/8 ̋ 5,3 6,5 13,5 27,5 11,5 19
GAVS-NI 10-8xG1/4i E021352 10/8 1/4 ̋ 7,0 7,0 15,5 28,0 10,5 17
GAVS-NI 10-8xG3/8i E021353 10/8 3/8 ̋ 7,0 7,0 15,5 29,0 11,5 19
GAVS-NI 10-8xG1/2i E021354 10/8 1/2 ̋ 7,0 7,0 15,5 33,0 15,0 24
Angular male connector A 14
With conical external thread
Type Art. no.
Hose
D/d
G NW
D L L1 L2 (mm
)
SW
WEV-NI 6-4xR1/8a E021431 6/4 1/8 ̋ 3,3 11,5 21,5 17,0 7,5 8
WEV-NI 6-4xR1/4a E021432 6/4 1/4 ̋ 3,3 11,5 22,5 21,0 11,0 10
WEV-NI 8-6xR1/8a E021433 8/6 1/8 ̋ 4,6 13,5 21,5 17,0 7,5 8
WEV-NI 8-6xR1/4a E021442 8/6 1/4 ̋ 5,3 13,5 22,5 21,0 11,0 10
WEV-NI 8-6xR3/8a E021443 8/6 3/8 ̋ 5,3 13,5 28,5 25,0 11,5 13
WEV-NI 10-8xR1/4a E021452 10/8 1/4 ̋ 7,0 15,5 24,0 21,0 11,0 10
WEV-NI 10-8xR3/8a E021453 10/8 3/8 ̋ 7,0 15,5 29,0 25,0 11,5 13
T-male connector A 18 With cylindrical external thread
Rotary
Max. operating pressure 12 bar at 20°C
Type Art. no.
Ho
se D
/d
G NW
D1
D3
L L1 L2 (mm
)
TVS-DR 6-4xG1/8ax6-4 E021831 6/4 1/8 ̋ 3,3 10,0 11,5 22,5 16,5 6,0
TVS-DR 6-4xG1/4ax6-4 E021832 6/4 1/4 ̋ 3,3 10,0 11,5 22,5 16,5 8,0
TVS-DR 8-6xG1/8ax8-6 E021841 8/6 1/8 ̋ 4,1 12,0 13,5 22,5 16,5 6,0
TVS-DR 8-6xG1/4ax8-6 E021842 8/6 1/4 ̋ 4,1 12,0 13,5 22,5 16,5 8,0
TVS-DR 10-8xG1/4ax10-8 E021852 10/8 1/4 ̋ 4,1 13,0 15,5 24,0 16,5 8,0
Screw fittings, series AMaximum operating pressure 16 bar at 20°C
166
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Straight union A 21 For hose connection on both sides
Type Art. no.
Hose
A D
/d
Hose
B D
/d
NW
D1
D2
L SW
SW
1
GVS-NI 6-4x6-4 E022133 6/4 6/4 3,3 11,5 11,5 31,0 12 10
GVS-NI 8-6x6-4 E022143 8/6 6/4 3,3 13,5 11,5 31,0 12 12
GVS-NI 8-6x8-6 E022144 8/6 8/6 5,3 13,5 13,5 31,0 12 12
GVS-NI 10-8x10-8 E022155 10/8 10/8 7,0 15,5 15,5 34,5 14 13
Threaded pipe angle A 22 For hose connection on both sides
Type Art. no.
Hose
A D
/d
Hose
B D
/d
NW
D1
D2
L L1 SW
WV-NI 6-4x6-4 E022233 6/4 6/4 3,3 11,6 11,5 19,5 19,5 8
WV-NI 8-6x8-6 E022244 8/6 8/6 5,3 13,5 13,5 22,5 22,5 10
WV-NI 10-8x10-8 E022255 10/8 10/8 7,0 15,5 15,5 24,0 24,0 10
T-union A 23 For hose connection on three sides
Type Art. no.
Hose
A D
/d
Hose
B D
/d
NW
D1
D2
L L1 SW
TVS-NI 3x6-4 E022333 6/4 6/4 3,3 11,5 11,5 21,5 21,5 8
TVS-NI 3x8-6 E022344 8/6 8/6 5,3 13,5 11,5 21,5 21,5 8
TVS-NI 3x10-8 E022355 10/8 10/8 7,0 15,5 15,5 24,0 24,0 10
Screw fittings, series AMaximum operating pressure 16 bar at 20°C
167
These wear-resistant plug connectors are especially suited to connecting hoses and
cylinders. The established push-in screw fittings make these connectors extremely easy
to use - the hose is simply inserted into the connector.
Plug connector Fox seriesQuick and easy
handling
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
168
3 |
Co
mp
resse
d a
ir d
istr
ibu
tio
n3
| D
istr
ibu
tin
g c
om
pre
sse
d a
ir
Straight screw-in connection R 1
With cylindrical external thread
Type Art. no.
Dia
.(m
m)
F E D L P CH
CH
1
SVG-R1-6xG1/8a E014133 6 1/8 ̋ 14,0 4,1 20,6 6,0 12 4
SVG-R1-6xG1/4a E014134 6 1/4 ̋ 18,0 4,1 19,3 8,0 12 4
SVG-R1-8xG1/8a E014144 8 1/8 ̋ 14,0 5,2 24,5 6,0 13 5
SVG-R1-8xG1/4a E014145 8 1/4 ̋ 18,0 6,2 24,4 8,0 14 6
SVG-R1-8xG3/8a E014146 8 3/8 ̋ 22,0 6,2 21,9 9,0 14 6
SVG-R1-10xG1/4a E014154 10 1/4 ̋ 18,0 7,2 28,5 8,0 16 7
SVG-R1-10xG3/8a E014155 10 3/8 ̋ 22,0 8,2 25,8 9,0 16 8
Straight screw-on connection R 2
With internal thread
Type Art. no.
Dia
.(m
m)
F E D L P CH
SVG-R2-6xG1/8i E014233 6 1/8 ̋ 14,0 5,0 26,1 7,0 12
SVG-R2-6xG1/4i E014234 6 1/4 ̋ 17,0 5,0 28,3 8,0 12
SVG-R2-8xG1/8i E014243 8 1/8 ̋ 14,0 7,0 27,3 7,0 13
SVG-R2-8xG1/4i E014244 8 1/4 ̋ 17,0 7,0 29,1 8,0 14
Straight connection R 3 2 hose connections
Type Art. no.
Dia
.(m
m)
F D L
SVG-R3-6x6 E014334 6 M13 4,5 31,2
SVG-R3-8x8 E014345 8 M15 6,5 33,9
SVG-R3-10x10 E014356 10 M17 8,0 37,8
Angle connection R 4 2 hose connections
Type Art. no.
Dia
.(m
m)
E D L
SVG-R4-6x6 L E014434 6 11,5 4,5 18,3
SVG-R4-8x8 L E014445 8 13,5 6,5 20,7
SVG-R4-10x10 L E014456 10 15,5 8,0 23,0
Fox quick plug-in connectionsMaximum operating pressure 16 bar at 20°C
169
3 |
Dis
trib
uti
ng
co
mp
resse
d a
ir
T-connection R 5 3 hose connections
Type Art. no.
Dia
.(m
m)
E D L L1
SVG-R5-6x6x6 T E014534 6 11,5 4,5 18,3 36,6
SVG-R5-8x8x8 T E014545 8 13,5 6,5 20,7 41,4
SVG-R5-10x10x10 T E014556 10 15,5 8,0 23,0 46,0
Angular male connector R 15
Rotary
Type Art. no.
Dia
.(m
m)
F E E1
L L1 P CH
SVG-R15-6xG1/8a L E015732 6 1/8 ̋ 14,0 11,3 22,5 24,9 6,0 3
SVG-R15-8xG1/4a L E015743 8 1/4 ̋ 18,0 13,8 26,1 29,4 8,0 4
SVG-R15-10xG1/4a L E015753 10 1/4 ̋ 18,0 16,5 31,3 29,4 8,0 4
Y-hose connector R 23 Made from technopolymer Max. operating pressure 12 bar at 20°C
Type Art. no.
Ø1
(mm
)
Ø2
(mm
)
F I E1
ØE
2
L L1
SVG-R23-6x6x6 Y E015834 6 6 3,3 15,0 11,3 11,3 35,5 5,8
SVG-R23-8x8x8 Y E015845 8 8 3,3 15,8 13,8 13,8 39,5 7,2
Fox quick plug-in connectionsMaximum operating pressure 16 bar at 20°C
170
Using compressed
air
Systainers | 176
Impact screwdrivers | 180
Ratchet screwdriver | 186
Rotary screwdrivers | 188
Drills | 190
Grinding machines | 192
Saws | 195
Special cutters | 196
Riveting tongs | 197
Grease guns | 198
Oil extracting device | 199
Needle descaler | 200
Chisel hammers | 202
Staplers and nail guns | 205
Paint spray guns | 211
Plaster sprayers | 220
Spray guns | 223
Special gun | 225
Blasting devices | 226
Pressure vessels | 230
Cartridge guns | 234
Blowing guns | 237
Tyre pressure gauges | 242
Accessories | 248
04
4 |
Usin
g c
om
pre
sse
d a
ir
Compressed air tools
in premium quality
Compressed air tools – lightweight, handy, safe
Compressed air tools from Schneider Druckluft are particularly light,
particularly handy, particularly robust and particularly safe. We are not the
only ones who believe that ease of handling forms the basis for perfect
working results – and fortunately our compressed air tools have proven
themselves many times before in practical applications working under
professional conditions.
Compressed air tools have critical advantages
Tools powered by compressed air offer the best prerequisites for making
your work as effective and comfortable as possible. Compared to electric
tools, compressed air tools simply have more going for them – including
greater staying power:
More robust and less prone to breakdowns – even in continuous
operation
Safer and can be used in potentially explosive areas, as possibility of
sparks is eliminated
Lighter and handier
Cannot overheat
172
4 |
Usin
g c
om
pre
sse
d a
ir
Compressed air tools
in action
An important detail: the air requirements of the tool
The inflation performance of the compressor must be compatible with the air
requirements of the tool. So that this value matches up, we specify the
inflation performance in addition to the displacement flow or suction capacity
for each compressor. The inflation performance is the air flow rate generated
by the compressor. Only the inflation performance gives you a reliable
indication of how much compressed air is actually available for operating
your machines or tools.
This is the most important attribute of a compressor
Operating durationHow often will the tool be used – only occasionally or for continuous
operation?
Application areaWhat work do you intend to use the tool for?
How much space is available at the site of use?
EquipmentWhat functions should the tool have?
What kind of material do you wish to process?
Transport or construction site packaging?
If you have any questions, please do not hesitate to contact us
173
4 |
Usin
g c
om
pre
sse
d a
ir
The right compressor*
for your tool?
Minimum power [kW] Air quality
Brief operation Continuous use Oiled Oil-free
Impact screwdrivers
D327347 SGS 345 - 1/2" 1.8 2.2D327400 SGS 141 - 1/2" 1.8 2.2D322800 SGS 340 - 3/8" 1.5 2.2D322811 SGS 405 - 1/2" 1.5 2.2D322812 SGS 600 - 1/2" 2.2 4.0D322813 SGS 815 - 1/2" 2.2 3.0D322814 SGS 1000 - 1/2" 2.2 4.0D322830 SGS 1625 - 3/4" 2.2 4.0D322840 SGS 1900 - 1" 2.2 4.0D322623 SGS 315 - 1" 2.2 3.0Ratchet screwdriversD322590 RAS 760-1/4'' 1.5 1.8D322602 RAS 176-1/2'' 1.5 1.5D322603 RAS 134-1/2'' 1.5 1.8Rotary screwdriversD322672 DRS 800 1.8 2.2D322673 DRS 810 2.2 2.2D322676 DRS 1800 1.8 1.8D322677 DRS 1000 1.8 1.8D322678 DRS 140 SYS 2.2 3.0DrillsD322642 BM 525-3/8'' 2.2 4.0D322643 BM-W 510 3.0 4.0D322647 BM 753 3.0 4.0Grinding machinesD322295 WSL 125 SYS 4.0 4.0D322314 BDS 330 SYS 4.0 4.0D322653 SBS-W 522 4.0 4.0D322659 SBS 700 SYS 1.8 2.2D322661 SBS 1031 SYS 3.0 4.0D322301 SBS set 3.0 4.0SawsD322320 KS 9A-SYS 1.8 2.2D322321 KS 9A 1.8 2.2Special cutterD322669 SPA-SYS 1.8 1.8Riveting tongsD322311 NZ-SYS 0.55 0.55Grease gunsD040025 FP-M 0.55 0.55D040026 FP-A 0.55 0.55Oil extracting deviceD040152 OBG 1.8 1.8Needle descalersD322414 NP-AT 28 SYS 3.0 4.0D322415 NP-AT 12 SYS 2.2 2.2Chisel hammersD322254 MLH-MHM 1.5 2.2D322297 MLH-KFZ 1.8 2.2D323003 MLH-SMH 19 SYS 4.0 4.0D323004 MLH-MMH 10 SYS 2.2 3.0D323017 MLH-P 880 2.2 3.0Staplers/nail gunsD200091 KLG 80-16 0.55 0.55D200094 KLG 114-65 0.55 1.1D200098 KLG 90-40 SYS 0.55 0.55D300067 SNG-SK 50 SYS 0.55 0.55D300068 PNG-PN 25 SYS 0.55 0.55
174
4 |
Usin
g c
om
pre
sse
d a
ir
Minimum power [kW] Air quality
Brief operation Continuous use Oiled Oil-free
Paint spray guns
D030305 FSP-FP-HTE2 WB 3.0 3.0D030310 FSP-FP-HTE2-1.5 3.0 3.0D030311 FSP-FP-HTE2-1.3 3.0 3.0D030312 FSP-FP-HTE2-1.8 3.0 3.0D030290 FSP-MINI-VARIO 2 1.8 2.2D030059 FSP-OPTIMAL 2001-1.5 2.2 3.0D030206 FSP-AZ 2 2.2 2.2D030202 FSP-FP-HTE-S 3.0 3.0D030203 FSP-FP-HTE-MA 3.0 3.0D030400 FSP-W 400-1.3 3.0 4.0D030401 FSP-W 400-1.8 3.0 4.0D030405 FSP-W 200-1.2 3.0 4.0D030194 FSP-FP 2001 M-MA 2.2 3.0Plaster sprayersD030063 TSP 3.0 3.0D900514 SPR 330-6.5 4.0 4.0D900521 SPR 215-6.5 4.0 4.0D900529 SPR 215-8.5 4.0 4.0D900621 SPR-SET 215 SYS 4.0 4.0Spray gunsD040006 SPP-SE 1.1 1.8D040008 SPP-SM 1.5 2.2D900512 SPL 750 1.5 2.2Special gun D040052 UHW 2000 1.5 1.8Blasting devicesD030025 SSP-SAV 3.0 4.0D030030 SSP-STRAHLFIX 2.2 2.2D030034 SSP-DSP 3.0 4.0D030262 SSP-SAW 4 SYS 4.0 4.0Cartridge gunsD040118 KTP 310 DR 0.55 1.1D040130 SIP 600 1.1 1.5D040137 KTP 310 1.1 1.5D040138 KTP 310 ALU 1.1 1.5Blowing gunsD740015 AP-BM-SN 0.55 1.1D740017 AP-BM-T9 0.55 1.1D740035 AP-SOFT 1.1 1.5D740115 AP-BM-SNV100 1.1 1.5D740140 AP-VARIO-S 1.1 1.5D740141 AP-VARIO-L 1.1 1.8D740148 AP-VARIO-L-500 1.1 1.8D740142 AP-VARIO-F 1.8 2.2D740143 AP-VARIO-V 1.1 1.8D740144 AP-VARIO-P 1.1 1.8D740145 AP-BM-S 1.5 1.8Tyre inflatorsD004009 RF-RMG 0.55 1.5D004011 RF-RMG-K 0.55 1.5D040011 RF-RM 0.55 1.5D004020 RF 6 (all) 0.55 1.5D004021 RF 12 (all) 0.55 1.5
* The overview does not include the simultaneous use of tools.
175
4 |
Usin
g c
om
pre
sse
d a
ir
Systainers from the latest generation are opened, closed and locked in the blink of an eye.
The sturdy, robust containers provide a clearly laid out storage system and make sure that
the workshop is organised tidily.
SystainersThe intelligent, mobile
storage system
176
4 |
Usin
g c
om
pre
sse
d a
ir
Foam inserts For perfect protection of
your products
SystainersThe right solution for every need –
with a high degree of flexibility
Robust and stablethanks to durable, temperature-resistant ABS material
Easy to stack and connect several Systainers for simple, combined transportation
T-LOC the flexible, intelligent locking mechanism allows you to open, close and lock Systainers with a single turn
Compatibilityof Systainers from old and new generations
Inlays and protective function for product-adapted storage of tools and accessories
Clearly laid out, sophisticated system creates a professional appearance for customers
Permanent organisation, perfect overview –
the new T-LOC Systainer
177
4 |
Usin
g c
om
pre
sse
d a
ir
Systainer Systainer without inlays
Type Art. no.
Wei
gh
t(k
g)
Inte
rna
l d
imen
sion
s
(H x
W x
D)
(mm
)
Dim
ensi
on
s (W
x D
x H
)
SYS 1 TL D322500 1,3 75x273x383 296x396x105
Systainer Systainer without inlays
Type Art. no.
Wei
gh
t(k
g)
Inte
rna
l d
imen
sion
s
(H x
W x
D)
(mm
)
Dim
ensi
on
s (W
x D
x H
)
SYS 2 TL D322501 1,5 127,5x267x383 296x396x157,5
Mini Systainer Can be combined with Mini Systainers only
Systainer without inlays
Type Art. no.
Wei
gh
t(k
g)
Inte
rna
l d
imen
sion
s
(H x
W x
D)
(mm
)
Dim
ensi
on
s (W
x D
x H
)
SYS-Mini 1 B323414 0,4 50x248x158 268x171x70
Mini Systainer Can be combined with Mini Systainers only
Systainer without inlays
Type Art. no.
Wei
gh
t(k
g)
Inte
rna
l d
imen
sion
s
(H x
W x
D)
(mm
)
Dim
ensi
on
s (W
x D
x H
)
SYS-Mini 2 B323417 0,45 67x248x158 268x171x87
SystainerThe intelligent transport and arrangement system
178
4 |
Usin
g c
om
pre
sse
d a
ir
Inserts and inlaysCommon features The various inlays and inserts allow Systainers to be adapted
individually to different requirements and applications
For protection as well as systematic storage of tools and
materials
Bottom cushion Type Art. no.
EIL-BP SYS 1-5 – 50mm B323483
With pre-perforated cubes for individual
adaptation to tools and contents of any
form
Cover cushion Type Art. no.
EIL-DP SYS 1-5 B323481
All contents protected by the burl padding
in the cover
SystainerThe intelligent transport and arrangement system
179
4 |
Usin
g c
om
pre
sse
d a
ir
The impact screwdrivers are characterised by extremely high torques and a low weight.
A balanced design, perfect centre of gravity and ergonomic handle mean they rest snugly
in the hand.
Impact screwdriversPowerful tools
for all applications
180
4 |
Usin
g c
om
pre
sse
d a
ir
SGS 3403/8"
SGS 4051/2"
SGS 6001/2"
SGS 8151/2"
SGS 10001/2"
SGS 16253/4"
SGS 19001"
Pass. car wheels ++ ++ ++Pass. car axles ++ ++ ++Pass. car engines ++ ++ ++Pass. car body ++ ++ ++Comm. veh. wheels ++ ++ ++Comm. veh. axles ++ ++ ++ ++Comm. veh. engines ++ ++ ++Comm. veh. body ++ ++ ++ ++ ++Lorry wheels ++ ++Lorry axles ++ ++ ++Lorry engines ++ ++ ++Lorry body ++ ++ ++ ++Metal structures ++ ++ ++ ++ ++ ++Machinery ++ ++ ++ ++ ++ ++
++ very well suited
Overview of our
impact screwdrivers
181
4 |
Usin
g c
om
pre
sse
d a
ir
Impact screwdriverCommon features Powerful, lightweight impact screwdriver
The compact isolated non-slip plastic housing, low weight, balanced
design, perfect centre of gravity
Ergonomic handle and operating elements within easy reach
guarantee comfortable handling and effortless work
Adjustable air supply for 3-stage adjusting the torque
The smooth switch (smooth starting) guarantees the safe insertion
of screws and sensitive working
Low operating noise
Twin-hammer impact mechanism
Impact screwdriver 3/8 ̋ Handy impact wrench for lightweight screw
connections
For vehicle, repair, metalworking and
assembly workshops. For smaller, lightweight
screw connections on motors, attachment
parts, machinery and metal constructions
Type Art. no.
Tool re
cep
tion
(Sq
ua
re b
olt
)
Air
req
uir
e-m
ents
(l/s
)
Work
ing
p
ress
ure
(ba
r)
Rel
ease
to
rqu
e(N
m)
Wei
gh
t(k
g)
SGS 340-3/8 ̋ D322800 3/8 ̋ 5 6,3 340 1,2
Impact screwdriver 1/2 ̋ Powerful impact wrench for medium-sized
screw connections
For tyre service, vehicle, repair, metalworking
and assembly workshops. For small to
medium-sized screw connections on wheels,
engines and bodyshells of passenger vehicles
and transporters, machinery and metal
constructions
Type Art. no.
Tool re
cep
tion
(Sq
ua
re b
olt
)
Air
req
uir
e-m
ents
(l/s
)
Work
ing
p
ress
ure
(ba
r)
Rel
ease
to
rqu
e(N
m)
Wei
gh
t(k
g)
SGS 405-1/2 ̋ D322811 1/2 ̋ 5 6,3 405 1,2
Impact screwdriver 1/2 ̋ Lightweight impact wrench for large screw
connections
Extremely powerful, lightweight, compact
impact screwdriver for vehicle workshops.
For medium-sized to large screw connections
on wheels, engines, axles and bodies of
passenger vehicles and transporters
Extremely compact housing
Non-slip rubber handle reduces vibrations
and prevents cold hands
Type Art. no.
Too
l re
cep
tio
n(S
qu
are
bo
lt)
Air
req
uir
e-m
ents
(l/s
)
Wo
rkin
g
pre
ssu
re(b
ar)
Rel
ease
to
rqu
e(N
m)
Wei
gh
t(k
g)
SGS 600-1/2 ̋ D322812 1/2 ̋ 8,5 6,0 600 1,5
Impact screwdriver
182
4 |
Usin
g c
om
pre
sse
d a
ir
Impact screwdriver 1/2 ̋ Powerful impact wrench for large screw
connections
For tyre service, vehicle, repair, metalwor-
king and assembly workshops. For large,
heavy-duty screw connections on wheels and
axles of passenger vehicles and transporters,
machinery and metal constructions
Type Art. no.
Tool re
cep
tion
(Sq
ua
re b
olt
)
Air
req
uir
e-m
ents
(l/s
)
Work
ing
p
ress
ure
(ba
r)
Rel
ease
to
rqu
e(N
m)
Wei
gh
t(k
g)
SGS 815-1/2 ̋ D322813 1/2 ̋ 8,2 6,3 815 1,8
Impact screwdriver 1/2 ̋ Powerful impact wrench for heavy-duty screw
connections
For passenger and commercial vehicle
workshops. For large, extremely heavy-duty
screw connections on axles of passenger
vehicles as well as wheels, axles and
bodyshells of transporters and trucks
Extremely compact housing
Non-slip rubber handle reduces vibrations
and prevents cold hands
Type Art. no.
Tool re
cep
tion
(Sq
ua
re b
olt
)
Air
req
uir
e-m
ents
(l/s
)
Work
ing
p
ress
ure
(ba
r)
Rel
ease
to
rqu
e(N
m)
Wei
gh
t(k
g)
SGS 1000-1/2 ̋ D322814 1/2 ̋ 10 6,3 1000 1,9
Impact screwdriver 1/2 ̋ Powerful impact wrench for all applications
Change rotation direction using one hand
Hammer impact mechanism
Scope of delivery: In plastic case with 10 box
spanners (10 to 13, 15, 17, 19, 22, 24, 27 mm)
Type Art. no.
Tool re
cep
tion
(Sq
ua
re b
olt
)
Air
req
uir
e-m
ents
(l/s
)
Work
ing
p
ress
ure
(ba
r)
Rel
ease
to
rqu
e(N
m)
Wei
gh
t(k
g)
SGS 345-1/2 ̋ D327347 1/2 ̋ 6 6 345 2,2
Impact screwdriver 1/2 ̋ Handy impact wrench with roller impact
mechanism for lightweight screw connections
Robust impact wrench with roller impact
mechanism
Higher torque in anticlockwise direction
Change rotation direction using one hand
Type Art. no.
Too
l re
cep
tio
n(S
qu
are
bo
lt)
Air
req
uir
e-m
ents
(l/s
)
Wo
rkin
g
pre
ssu
re(b
ar)
Rel
ease
to
rqu
e(N
m)
Wei
gh
t(k
g)
SGS 141-1/2 ̋ D327400 1/2 ̋ 6 6,3 400 2,3
Impact screwdriver
183
4 |
Usin
g c
om
pre
sse
d a
ir
Wall bracket for impact screwdriver 1/2 ̋ Type Art. no.
WH-SGS B322610
Impact wrench always close at hand to
save time
With 4 retaining pins for socket wrenches
and storage trays for small parts
2 strong magnetic holders for simple
attachment to all vertical metal surfaces
Compatible with impact wrenches
up to 1/2 ̋
Impact screwdriver 3/4 ̋ Lightweight impact wrench for heavy-duty screw
connections in the commercial vehicle trade
For commercial vehicle workshops. For extremely
large, heavy-duty screw connections on wheels,
axles and bodyshells of transporters and trucks
as well as machinery and metal constructions
Type Art. no.
Tool re
cep
tion
(Sq
ua
re b
olt
)
Air
req
uir
e-m
ents
(l/s
)
Work
ing
p
ress
ure
(ba
r)
Rel
ease
to
rqu
e(N
m)
Wei
gh
t(k
g)
SGS 1625-3/4 ̋ D322830 3/4 ̋ 9,1 6,3 1625 3,4
Impact screwdriver 1 ̋ Powerful impact wrench for the commercial
vehicle trade
For commercial vehicle workshops. For extremely
large, heavy-duty screw connections on wheels,
axles and bodyshells of trucks and buses as well
as machinery and metal constructions
Type Art. no.
Tool re
cep
tion
(Sq
ua
re b
olt
)
Air
req
uir
e-m
ents
(l/s
)
Work
ing
p
ress
ure
(ba
r)
Rel
ease
to
rqu
e(N
m)
Wei
gh
t(k
g)
SGS 1900-1 ̋ D322840 1 ̋ 9,1 6,3 1900 3,4
Impact screwdriver 1 ̋ Robust impact wrench for all commercial
vehicles
Extremely powerful impact screwdriver with
dual-ring hammer impact mechanism for the
most demanding applications in commercial
vehicle and bus workshops, haulage
companies, agricultural and industrial sectors
Only one adjusting wheel for changing the
rotation direction and adjusting the torque.
Easy handling as a result
No dispersion of brake dust because exhaust
air is discharged from below
Long working spindle (200 mm) for easy
work, even on double tyres
Rubber protection prevents damage to wheel
rims, etc.
Standard features include: additional handle
Type Art. no.
Too
l re
cep
tio
n(S
qu
are
bo
lt)
Air
req
uir
e-m
ents
(l/s
)
Wo
rkin
g
pre
ssu
re(b
ar)
Rel
ease
to
rqu
e(N
m)
Wei
gh
t(k
g)
SGS 315-1 ̋ D322623 1 ̋ 11 8,0 3000 10,6
Impact screwdriver
184
4 |
Usin
g c
om
pre
sse
d a
ir
Set of sockets for impact wrench Type Art. no.
Nu
mb
er o
f b
ox
spa
nn
ers
(pie
ce(s
))
Sock
et s
izes
SKSL-Set 3/8 ̋ -8 D322275 8 8, 10, 11, 12, 13, 14, 17, 19
SKSL-Set 1/2 ̋ -10 D322268 10 11, 12, 13, 14, 15, 17, 19, 21, 22, 24
SKSL-Set 1/2 ̋ -2 long D322292 2 17, 19 – extended version, 78 mm long
SKSL-Set 1/2 ̋ -3 Alu D322294 3 17, 19, 21 – plastic bonded, for aluminium wheels
SKSL-Set 3/4 ̋ -8 D322298 8 24, 27, 29, 30, 32, 35, 36, 38
SKSL-Set 1 ̋ -7 D322278 7 24, 27, 30, 32, 35, 36, 38
SKSL-Set 1/2 ̋ -3 B322303 3 17, 19, 21
Lubricants/oil Type Art. no.
OEMIN-DLW 0,1 E771130
OEMIN-DLW 1,0 B770000
Tool oil for daily use
Impact tools, in particular, should be oiled
every day via the plug nipple
Impact screwdriver
185
4 |
Usin
g c
om
pre
sse
d a
ir
The handy design and low weight of the ratchet screwdriver allow you to work effortlessly
for long periods of time.
Ratchet screwdriverCan also reach locations
with limited access
186
4 |
Usin
g c
om
pre
sse
d a
ir
Ratchet screwdriver 1/4 ̋ Handy, lightweight ratchet screwdriver
Clockwise/Anticlockwise direction adjustment
in the ratchet head
Rubber protection prevents damage
Quiet because exhaust air is discharged from
the rear
Type Art. no.
Tool re
cep
tion
(Sq
ua
re b
olt
)
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Sp
eed
(min
-1)
Wei
gh
t(k
g)
Rel
ease
to
rqu
e(N
m)
RAS 760-1/4 ̋ D322590 1/4 ̋ 210 6,3 310 0,5 33
Ratchet screwdriver 1/2 ̋ Clockwise/Anticlockwise direction adjustment
in the ratchet head
Rubber ratchet head for protection against
scratches
Quiet because exhaust air is discharged
from the rear
Type Art. no.
Tool re
cep
tion
(Sq
ua
re b
olt
)
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Sp
eed
(min
-1)
Wei
gh
t(k
g)
Rel
ease
to
rqu
e(N
m)
RAS 134-1/2 ̋ D322603 1/2 ̋ 235 6,3 170 1,2 70
Ratchet screwdriver 1/2 ̋ Very powerful
With roller impact mechanism for loosening
and tightening stiff screws
Clockwise/Anticlockwise direction adjustment
in the ratchet head
Lever for adjusting the tightening torque
Air inlet with dirt strainer extends the service
life of the machine
Type Art. no.
Tool re
cep
tion
(Sq
ua
re b
olt
)
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Sp
eed
(min
-1)
Wei
gh
t(k
g)
Rel
ease
to
rqu
e(N
m)
RAS 176-1/2 ̋ D322602 1/2 ̋ 200 6,3 280 1,5 100
Set of sockets for ratchet screwdriver Type Art. no.
Nu
mb
er o
f b
ox
spa
nn
ers
(pie
ce(s
))
So
cket
siz
es
SKSL-Set 1/2 ̋ -10 D322268 10 11, 12, 13, 14, 15, 17, 19, 21, 22, 24
Ratchet screwdriver
187
4 |
Usin
g c
om
pre
sse
d a
ir
The powerful rotary screwdriver with 1/4" hexagon adapter is suitable for all kinds of
different application. Available with straight design, bar grip and hanger bracket or
gun design.
Rotary screwdriversFor all types of
screw fitting
188
4 |
Usin
g c
om
pre
sse
d a
ir
Straight rotary screwdriver Straight design with bar grip and hanging
bracket
Light weight for effortless work
Hexagon adapter 1/4 ̋ (6.35 mm)
Simple tool change thanks to quick-change
chuck
Extremely low noise due to exhaust air silencer
Forward/reverse switch for rapid changes in
direction
Stepless adaptation of the torque on different
application through external guide ring with
scale
Non-slip rubber handle reduces vibrations
and prevents cold hands
High safety thanks to cut-out clutch. The
screwdriver switches off automatically when
the set torque is reached
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Torq
ue
ma
x.(N
m)
Sp
eed
(min
-1)
Wei
gh
t(k
g)
DRS 1000 D322677 276 6 3,0 1000 0,5
DRS 1800 D322676 276 6 1,6 1800 0,5
Straight rotary screwdriver Forward/reverse switch for rapid changes in
direction
Straight design with bar grip and hanging
bracket
Hexagon adapter 1/4 ̋ (6.35 mm)
With keyless chuck
Torque adjusted via external adjusting ring
High torque for screws up to 6.5 mm
Quiet due to exhaust air hose
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Torq
ue
ma
x.(N
m)
Sp
eed
(min
-1)
Wei
gh
t(k
g)
DRS 800 D322672 300 7 10,0 1800 1,0
Gun rotary screwdriver Forward/reverse switch for rapid changes in
direction
Hexagon adapter 1/4 ̋ (6.35 mm)
With keyless chuck
Non-slip rubber handle reduces vibrations
and prevents cold hands
Torque adjusted via external adjusting ring
Quiet due to exhaust air hose
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Wo
rkin
g
pre
ssu
re(b
ar)
Torq
ue
ma
x.(N
m)
Sp
eed
(min
-1)
Wei
gh
t(k
g)
DRS 810 D322673 360 7 8,0 1650 1,2
Gun rotary screwdriver Very powerful machine with dual impact
mechanism
Well suited for screw fittings in joiner’s and
carpenter’s workshop
Hexagon adapter 1/4 ̋ (6.35 mm)
Forward/reverse switch for rapid changes in
direction
Scope of delivery: Mini-Systainer; Magnetic bit
holder, 4 bits
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Wo
rkin
g
pre
ssu
re(b
ar)
Torq
ue
ma
x.(N
m)
Sp
eed
(min
-1)
Wei
gh
t(k
g)
DRS 140 SYS D322678 420 6,3 100 11500 1
Rotary screwdrivers
189
4 |
Usin
g c
om
pre
sse
d a
ir
The drills not only have an impressive ergonomic design, but also a practical exhaust air
guide directed to the rear to prevent the dispersion of dust and drilling chips into the air.
DrillsLight
and powerful
190
4 |
Usin
g c
om
pre
sse
d a
ir
Gun drill Very powerful
Forward/reverse switch for rapid changes in
direction
With quick clamp chuck 3/8 ̋
No dust dispersion due to exhaust air hose
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Dri
llin
g
cap
acit
y, s
teel
(mm
)
Dri
llin
g
cap
acit
y, w
ood
(mm
)
Dri
ll c
hu
ck(m
m)
Sp
eed
(min
-1)
BM 525-3/8 ̋ D322642 360 6,3 10 20 10 1800
Gun drill Clockwise rotation
With 3/8 ̋ keyless chuck and additional
handle
Non-slip rubber handle reduces vibrations
and prevents cold hands
No dust dispersion due to exhaust air hose
Powerful model with slow rotating motor.
Therefore also suitable for tools with a larger
diameter (e.g. stirring rods)
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Dri
llin
g
cap
acit
y, s
teel
(mm
)
Dri
llin
g
cap
acit
y, w
ood
(mm
)
Dri
ll c
hu
ck(m
m)
Sp
eed
(min
-1)
BM 753 D322647 480 6,3 13 25 13 500
Angle drill Forward/reverse switch for rapid changes in
direction
With quick clamp chuck 3/8 ̋
Compact design, suitable for tight spaces
Air inlet with dirt strainer extends the service
life of the machine
No dispersion of drilling chips because
exhaust air is discharged from the rear
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Dri
llin
g
cap
acit
y, s
teel
(mm
)
Dri
llin
g
cap
acit
y, w
ood
(mm
)
Dri
ll c
hu
ck(m
m)
Sp
eed
(min
-1)
BM-W 510 D322643 420 6,3 10 20 10 1800
Keyless chuckType Art. no.
Cla
mp
ing
w
idth
(mm
)
Ad
ap
ted
fo
r
SSBF 3/8 ̋ – 10 mm B322230 10 BM 3/8 ̋ HW 525-L, BM-W-HW 510 AH-L
SSBF 3/8 ̋ – 13 mm B322231 13 BM-HW 753 L
Drills
191
4 |
Usin
g c
om
pre
sse
d a
ir
The low weight and compact size of the grinding machines ensure effortless operation
throughout your working day. The machines are also relatively quiet and are fitted with an
exhaust air hose that prevents the dispersion of dust.
Grinding machinesVersatile grinding machines
for optimised work results
192
4 |
Usin
g c
om
pre
sse
d a
ir
Axial grinder Safety lever prevents unintentional start-up
Non-slip rubber handle reduces vibrations
and prevents cold hands
No dust dispersion due to exhaust air hose
Scope of delivery: in Systainer; Standard features
include: 3 mm and 6 mm clamping collet
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Sp
eed
(min
-1)
Wei
gh
t(k
g)
SBS 1031 SYS D322661 300 7 22000 0,6
Axial grinder Safety lever prevents unintentional start-up Scope of delivery: Standard features include:
3 mm and 6 mm clamping collet; 5 grinding
points respectively with 6 mm and 3 mm shaft,
grit P60 or P80; In plastic case
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Sp
eed
(min
-1)
Wei
gh
t(k
g)
SBS-Set-Standard D322301 250-340 6,3 22000 0,6
Precision axial grinder Mini axial grinder
Effortless work thanks to small size, light
weight and perfect manageability
Non-slip rubber handle reduces vibrations
and prevents cold hands
Infinitely variable speed adjustment for
different working conditions
No dust dispersion due to exhaust air
hose
Scope of delivery: Mini-Systainer; One 2,3 mm
and one 3,0 mm collet chuck
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Sp
eed
(min
-1)
Wei
gh
t(k
g)
Len
gth
(cm
)
SBS 700 SYS D322659 170 6,3 70000 0,23 13,0
Angle grinder Suitable for grinding discs and points up to
dia. 45 mm
Effortless work thanks to small size, light
weight and perfect manageability
No dust dispersion due to exhaust air hose
Safety lever prevents unintentional start-up
Scope of delivery: Standard features include:
6 mm clamping collet
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Wo
rkin
g
pre
ssu
re(b
ar)
Sp
eed
(min
-1)
Wei
gh
t(k
g)
Len
gth
(cm
)
SBS-W 522 D322653 330 7 22000 0,45 15,5
Grinding machines
193
4 |
Usin
g c
om
pre
sse
d a
ir
Grinding points
Type Art. no.
Gri
t
Sh
an
k
dia
met
er(m
m)
SFI-Standard B322525 P60 / P80 6 / 3
Grinding drum 4 grinding drums made of rubber, plus
sanding paper
Grinding drums 9/12 mm diameter with 3 mm
shaft, 18/25 mm with 6 mm shaft
Type Art. no.
Sh
an
k
dia
met
er(m
m)
SLW-Set 9/12/18/25 B322500 3 / 6
Abrasive sleeveType Art. no.
Con
ten
ts
Gri
t
Sh
an
k
dia
met
er(m
m)
SFH 18/10 B322533 10 P100 6
SFH 25/10 B322534 10 P100 6
SFH 9/10 B322531 10 P100 3
SFH 12/10 B322532 10 P100 3
Angle grinder For standard grinding wheels up to
dia. 125 mm
M 14 threaded spindle for standard grinding
discs
Handy, robust model
Safety lever prevents unintentional start-up
Standard features include: additional handle
Scope of delivery: in Systainer
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Sp
eed
(min
-1)
Wei
gh
t(k
g)
WSL 125 SYS D322295 380 6,3 11000 1,8
Abrasive belt Automatic belt tensioner
360° rotary sanding arm (width 10 mm)
Scope of delivery: in Systainer; 5 Abrasive belts
K80
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Wo
rkin
g
pre
ssu
re(b
ar)
Sp
eed
(min
-1)
Wei
gh
t(k
g)
BDS 330 SYS D322314 400 6,3 16000 0,75
Grinding machines
Accessories Type Art. no.
Abrasive belt SFB 330x10 K80/5 B322502
Abrasive belt SFB 330x10 K120/5 B322503
Abrasive belt SFB 330x10 K180/5 B322504
194
4 |
Usin
g c
om
pre
sse
d a
ir
SawsHigh safety
and long service life
The saws are extremely pleasant to work with because the rubber-coated handle
reduces vibrations and protects your hands from the cold. Furthermore, the stop
bracket makes sure that your working results turn out perfectly.
Body saw Safety lever prevents unintentional start-up
Stop bracket ensures reliable saw guidance
and extends the useful life of saw blades
Non-slip rubber handle reduces vibrations
and prevents cold hands
No dust dispersion due to exhaust air
hose
Scope of delivery: D322321: 1 saw blade;
D322320: in Systainer with 2x5 saw blades
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Str
ok
e ra
te(m
in-1
)
Str
ok
e le
ng
th(m
m)
Cu
ttin
g
thic
kn
ess
(mm
)
Wei
gh
t(k
g)
KS 9A-SYS D322320 200 6,3 9300 9 1,2 0,9
KS 9A D322321 200 6,3 9300 9 1,2 0,9
Saw blades Bi-metal version Quantity in pack: 5
Type Art. no.
For
met
al p
late
th
ick
nes
s(m
m)
Len
gth
of
cutt
ing
b
lad
e(m
m)
Pit
ch(m
m)
SGB-Bimet 0,3-0,8/5 B322520 0,3 – 0,8 50 0,8
SGB-Bimet 0,8-1,2/5 B322521 0,8 – 1,2 50 1,0
195
4 |
Usin
g c
om
pre
sse
d a
ir
Special cutterThe special cutter
for flexible operation
This special cutter is particularly handy and user-friendly, primarily due to the low
weight and compact design of the machine. The safety lever prevents the user from
switching on the machine unintentionally and reduces the risk of injury as a result.
Special cutter Handy, lightweight tool
Oscillating drive with 20,000 oscillations
Suitable for continuous use
19 mm hexagon tool holder
No dust dispersion due to exhaust air hose
Safety lever prevents unintentional start-up
Compatible with standard grinding discs,
diamond wheels, scrapers and cutters
Scope of delivery: in Systainer; One straight, one
straight-stepped and one curved-stepped knife
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Wo
rkin
g
pre
ssu
re(b
ar)
Vib
rati
on
s(m
in-1
)
Wei
gh
t(k
g)
SPA-SYS D322669 280 6,3 20.000 1,0
Accessories for special cutter Type Art. no.
MR-Set-HW-SPA B322284
Knife set (1 straight-flat, straight-offset,
bent-offset knife respectively)
196
4 |
Usin
g c
om
pre
sse
d a
ir
Riveting tongsTidies up even
during work
These riveting tongs have a special storage container that catches the rivets while
you are working. A selection of various rivet guides makes them suitable for different
rivets – the air requirements of the tool are low as well.
Blind rivet gun Different rivet guides allow the use of all
standard rivet types
Rivet pins collect in container, reducing your
workload
Can be used on building sites in combination
with small compressors because of low air
requirement
For rivet sizes 2.4 – 4.8 mm
Scope of delivery: in Systainer; Various rivet
holders, 4 x 10 riveting bolts
Type Art. no.
Air
req
uir
e-m
ents
(l/s
trok
e)
Wo
rkin
g
pre
ssu
re(b
ar)
Riv
etin
g(Ø
mm
)
Wei
gh
t(k
g)
NZ-SYS D322311 1,1 6,3 2,4 – 4,8 1,7
197
4 |
Usin
g c
om
pre
sse
d a
ir
Grease gunsFast working progress
without great effort
The long hose on these grease guns can reach into the most difficult areas with ease –
the extremely versatile guns can take 400 g cartridges or loose grease and are the
only guns available with two venting valves for easier ventilation.
Grease gunCommon features With 1:40 pressure ratio. 6 bar input pressure corresponds to 240 bar
pressure at the hydraulic nipple
Quick and easy working progress with two convenient venting valves
For standard 400 g cartridges or poured grease
4-claw retainer system for perfect grip of the grease nipple
With robust metal casing
FP-M Manual grease gun
A shot of grease is produced every time the trigger is pressed
With 200 mm connection hose
FP-A Automatic grease gun
Grease is delivered when the trigger lever is pressed and stops when the trigger is released
The 800 mm long connecting hose enables you to reach awkward spots
Can be used with grease NLGI, stages 1-3
Type Art. no.
Air
req
uir
e-m
ents
(l/s
tro
ke)
Wo
rkin
g
pre
ssu
re(b
ar)
Wei
gh
t(k
g)
FP-M D040025 0,6 2-10 1,5
FP-A D040026 0,6 2-10 1,5
198
4 |
Usin
g c
om
pre
sse
d a
ir
Oil extracting deviceQuiet
and durable
This oil extracting device has two suction probes that enable you to work more
quickly and an extra-large nozzle that allows you to empty the vessel without using
tools. Suitable for all kinds of application.
Oil extraction device The plug adapter for the suction probes
ensure rapid probe changes without requiring
tools
2 suction probes attached via connector
sleeves for rapid working
Impact-resistant plastic casing for a long
service life
Quiet due to exhaust air silencer
The large 20 cm nozzle allows for rapid vessel
drainage without requiring tools
Wide base for extra stability
Locking lever for smooth continuous
operation
Scope of delivery: With 3 probes (7 and 10 mm
in dia., length 1 m)
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Wo
rkin
g
pre
ssu
re(b
ar)
Tan
k v
ol.
(l)
Wei
gh
t(k
g)
OBG D040152 160 6,3 5,5 1,7
199
4 |
Usin
g c
om
pre
sse
d a
ir
The needle descalers in a solid metal housing have an impressively long service life and are
fitted with extremely durable needles made from special steel.
Needle descalersSpecially robust
all-metal enclosure
200
4 |
Usin
g c
om
pre
sse
d a
ir
Straight needle descaler Robust metal casing for a long service life
Special steel needles with an extended useful
life, needle length 145 mm, dia. 3 mm
Guide bush easy to remove for rapid needle
replacement, no tools required
Scope of delivery: in Systainer
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Sta
mp
ing
n
um
ber
(min
-1)
Nu
mb
er o
f n
eed
les
Wei
gh
t(k
g)
NP-AT 12 SYS D322415 120 6,3 4000 12 1,2
Gun needle descaler Robust metal casing for a long service life
Special steel needles with an extended useful
life, needle length 145 mm, dia. 3 mm
Depth adjustment of needle guide bush
for perfect adaptation to changing working
conditions
Gun grip for ergonomic handling
Scope of delivery: in Systainer
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Sta
mp
ing
n
um
ber
(min
-1)
Nu
mb
er o
f n
eed
les
Wei
gh
t(k
g)
NP-AT 28 SYS D322414 220 6,3 4500 28 3,5
Spare needlesType Art. no.
Con
ten
ts
AT 12 B322279 Set with 12 pieces for AT 12
AT 28 B322281 Set with 28 pieces for AT 28
Needle descaler
201
4 |
Usin
g c
om
pre
sse
d a
ir
The chisel hammers are characterised by an extremely high impact power and a relatively
low weight. Whether pointed chisels, flat chisels, boasting chisel, sheet metal cutting chisels
or grooving chisels – you are sure to find the right chisel hammer and accessories for every
application.
Chisel hammersEnormous impact power
and low weight
202
4 |
Usin
g c
om
pre
sse
d a
ir
Overview of our
chisel types
Chisel type Application
Pointed chiselFor general chiselling and demolition work in masonry, concrete and stone,
e.g. for installing electric cables
Flat chisel For general chiselling and demolition work in masonry, concrete and stone
Boasting chisel, straight Removal of material from large surfaces, e.g. tiles or plaster
Boasting chisel, curved Removal of tiles or plaster, for example, ergonomic curve for effortless work
Sheet metal cutting chisel Cutting of body parts or cutting sheet metal to size
Grooving chiselChiselling slots and channels in masonry, stone and concrete, ergonomic
curve for effortless work
Chisel hammer 10 mm With cross-slot holding cap Scope of delivery: Pointed chisel 185 mm, flat
chisel 175 mm, metal slitting chisel 175 mm;
Metal slitting chisel 180 mm, bolt removal chisel
175 mm; Plastic case
Type Art. no.
Tool re
cep
tion
(Hex
ag
on
al
bolt
)
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Sta
mp
ing
n
um
ber
(min
-1)
Str
ok
e le
ng
th(m
m)
Wei
gh
t(k
g)
MLH-MHM D322254 10 150-240 4 – 6 3000 65 1,5
Chisel hammer 10 mm Thanks to the high impact frequency,
particularly well suited to sheet metal cutting
work, e.g. in the automotive trade
With cross-slot holding cap
Scope of delivery: metal slitting chisel 125 mm,
metal cutting chisel 130 mm; Hole cutting chisel
125 mm, flat chisel, bent, 180 mm; Plastic case
Type Art. no.
Too
l re
cep
tion
(Hex
ag
on
al
bo
lt)
Air
req
uir
e-m
ents
(l/m
in)
Wo
rkin
g
pre
ssu
re(b
ar)
Sta
mp
ing
n
um
ber
(min
-1)
Str
ok
e le
ng
th(m
m)
Wei
gh
t(k
g)
MLH-Kfz D322297 10 220 4-6 4500 41 1,2
Chisel hammer 10 mm Robust chisel hammer with high impact
power and low weight
With cross-slot holding cap
Scope of delivery: in Systainer; pointed chisel
180 mm, flat chisel 180 mm, boasting chisel –
curved
Type Art. no.
Too
l re
cep
tio
n(H
exa
go
na
l b
olt
)
Air
req
uir
e-m
ents
(l/m
in)
Wo
rkin
g
pre
ssu
re(b
ar)
Sta
mp
ing
n
um
ber
(min
-1)
Str
ok
e le
ng
th(m
m)
Wei
gh
t(k
g)
MLH-MMH 10 SYS D323004 10 280 6,3 3000 45 1,5
203
4 |
Usin
g c
om
pre
sse
d a
ir
Accessories Type Art. no.
Retaining cap HK-K-MHM/Kfz B323029
Retaining cap HK-K-MMH 10 G408579
Tension spring SSF-SM/Kfz B322249
Chisel hammer 12 mm Lightweight chisel hammer with enormous
impact power
Extremely wear-resistant, even after
continuous operation
Scope of delivery: in Systainer; pointed chisel
195 mm, flat chisel 250 mm
Type Art. no.
Tool re
cep
tion
(Hex
ag
on
al
bolt
)
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Sta
mp
ing
n
um
ber
(min
-1)
Str
ok
e le
ng
th(m
m)
Wei
gh
t(k
g)
MLH-SMH 19 SYS D323003 12 320 7 2400 60 3,2
Chisel with hexagon 12 mm Made of high-alloy tool steel
Compatible with chisel hammer with 12 mm
holder
HSS: extra hard, wear-resistant
Type Art. no.
Dim
en-
sio
ns
(mm
)
Ver
sio
n
ML12-S 190x20 HSS B323004 190x20 Pointed chisel
ML12-S 270x20 HSS B323005 270x20 Pointed chisel
ML12-F 190x20 HSS B323001 190x20 Flat chisel
ML12-F 270x20 HSS B323002 270x20 Flat chisel
ML12-BG 255x50 HSS B323010 255x50 Boasting chisel
ML12-BG 265x95 HSS B323011 265x95 Boasting chisel
Accessories Type Art. no.
Retaining cap HK-K-SMH 19 B323018
Retaining cap HK-K-SMH 55 B323019
Chisel hammers
Chisel 10 mm Compatible with chisel hammers with 10 mm
holder
HSS: extra hard, wear-resistant
Type Art. no.
Dim
en-
sion
s(m
m)
Ver
sion
ML10-S 200x12 B322255 200x12 Pointed chisel
ML10-F 180x20 B322256 180x20 Flat chisel
ML10-F 250x20 B322253 250x20 Flat chisel
ML10-BG 180x50 B322258 180x50 Boasting chisel, straight
ML10-BK 180x50 B322260 180x50 Boasting chisel, bent
ML10-BK215x100 B323012 215x100 Boasting chisel, bent
ML10-BS 135x18 B322363 135x18 Sheet metal cutting chisel
ML10-N 210x23 B322259 210x23 Grooving chisel
ML10-S 180x12 HSS B322372 180x12 Pointed chisel
ML10-S 250x12 HSS B322374 250x12 Pointed chisel
ML10-F 250x12 HSS B322370 250x12 Flat chisel
204
4 |
Usin
g c
om
pre
sse
d a
ir
Our extensive range of staplers and nail guns offers the perfect machine for every
application and includes a wide selection of compatible nails and staples.
Staplers and nail gunsFor strong
joints
205
4 |
Usin
g c
om
pre
sse
d a
ir
KLG 80-16 KLG 90-40 KLG 114-65 SNG-SK 50 PNG-PN 25
Sheeting, insulation material ++Fabrics, leather ++Furniture rear panels ++ +Skirting boards ++ +Wooden decks ++ +Groove and tongue boards/panels ++ +Plaster fibre boards/OSBs ++Crates, pallets + ++ +Trim strips, decorative elements + ++Window beads + ++
++ very well suited + well suited
Overview of our
staplers and nail guns
Stapler For attaching interior panelling, furniture
back boards, plastic sheets, fabrics, leather,
insulating material, carpets, upholstery and
fur/hides
Extremely compact design, effortless work
for long periods due to low weight
Long tip suitable for reaching areas that are
difficult to access
Non-slip rubber handle reduces vibrations
and prevents cold hands
Two-stage trigger prevents injuries caused
by tool triggering accidentally
Quiet because exhaust air is discharged from
the rear
For type 80 staples, length 4-16 mm
Type Art. no.
Air
req
uir
e-m
ents
(l/i
mp
act
)
Wo
rkin
g
pre
ssu
re(b
ar)
Ma
ga
zin
e ca
pa
city
Wei
gh
t(k
g)
KLG 80-16 D200091 0,3 4 – 7 157 0,87
Staples, type 80 C = chisel point
NK = galvanised
Price for bulk quantities on request
Type Art. no.
Ba
ck
wid
th(m
m)
Wir
e g
au
ge
(mm
)
Len
gth
(mm
)
Pa
cka
gin
g
un
it(p
iece
(s))
Bu
lk
bu
yin
g(p
iece
(s))
KL 80/06 CNK/3000 C420003 12,8 0,9x0,7 6 3000 30000
KL 80/08 CNK/3000 C420004 12,8 0,9x0,7 8 3000 30000
KL 80/10 CNK/3000 C420005 12,8 0,9x0,7 10 3000 30000
KL 80/12 CNK/3000 C420006 12,8 0,9x0,7 12 3000 30000
KL 80/14 CNK/3000 C420007 12,8 0,9x0,7 14 3000 30000
KL 80/16 CNK/3000 C420008 12,8 0,9x0,7 16 3000 30000
206
4 |
Usin
g c
om
pre
sse
d a
ir
Stapler For attaching wall panelling, tongue and
groove boards, profiled boards and furniture
back boards as well as manufacturing boxes
and fences, suitable for exhibition construc-
tion and interior fittings
Compact design, effortless work for long
periods due to low weight
Contact release for rapid working progress
With depth regulator for adjusting the inser-
tion depth
Non-slip rubber handle reduces vibrations
and prevents cold hands
Rotatable exhaust air guide
For type 90 staples, length 13-40 mm
Scope of delivery: in Systainer; Protective
goggles; 2000 type 90 staples, length 30 mm
Type Art. no.
Air
req
uir
e-m
ents
(l/i
mp
act
)
Work
ing
p
ress
ure
(ba
r)
Ma
ga
zin
e ca
pa
city
Wei
gh
t(k
g)
KLG 90-40 SYS D200098 0,8 5 – 8 100 1,1
Staples, type 90 C = chisel point
NK = galvanised
H = resinated
V2A: stainless steel
Price for bulk quantities on request
Type Art. no.B
ack
w
idth
(mm
)
Wir
e g
au
ge
(mm
)
Len
gth
(mm
)
Pa
cka
gin
g
un
it(p
iece
(s))
Bu
lk
bu
yin
g(p
iece
(s))
KL 90/15 CNKH/2000 C420022 5,7 1,25x1,0 15 2000 20000
KL 90/20 CNKH/2000 C420024 5,7 1,25x1,0 20 2000 20000
KL 90/25 CNKH/2000 C420027 5,7 1,25x1,0 25 2000 20000
KL 90/28 CNKH/5000 C420029 5,7 1,25x1,0 28 5000 25000
KL 90/30 CNKH/2000 C420030 5,7 1,25x1,0 30 2000 20000
KL 90/30 CV2AH/5000 C421030 5,7 1,25x1,0 30 5000 25000
KL 90/35 CNKH/2000 C420034 5,7 1,25x1,0 35 2000 20000
KL 90/40 CNKH/2000 C420035 5,7 1,25x1,0 40 2000 20000
Stapler For attaching plasterboard, OSBs and chip
board as well as manufacturing pallets,
boxes, crates, shuttering, etc.
With depth regulator for adjusting the
insertion depth
Selection between single release and contact
release for rapid working progress
Front panel easy to open without tools in the
event of problems
Non-slip rubber handle reduces vibrations
and prevents cold hands
Rotatable exhaust air guide
For type 114 staples, up to 64 mm
TIP: Set the working pressure or insertion
depth so that the staple only sinks in slightly
to prevent tearing away when working with
plasterboards
Scope of delivery: Protective goggles
Type Art. no.
Air
req
uir
e-m
ents
(l/i
mp
act
)
Wo
rkin
g
pre
ssu
re(b
ar)
Ma
ga
zin
e ca
pa
city
Wei
gh
t(k
g)
KLG 114-65 D200094 1,3 5 – 8 130 2,5
Tackers, staplers and nail guns
207
4 |
Usin
g c
om
pre
sse
d a
ir
Staples, type 114 Corresponds to standard DIN 18182-D40-D63
C = chisel point
NK = galvanised
H = resinated
Type Art. no.
Ba
ck
wid
th(m
m)
Wir
e g
au
ge
(mm
)
Len
gth
(mm
)
Pa
cka
gin
g
un
it(p
iece
(s))
KL 114/30 CNKH/20000 C430021 10,8 1,6x1,4 30 20000
KL 114/35 CNKH/10000 C430022 10,8 1,6x1,4 35 10000
KL 114/40 CNKH/10000 C430023 10,8 1,6x1,4 40 10000
KL 114/45 CNKH/10000 C430024 10,8 1,6x1,4 45 10000
KL 114/50 CNKH/10000 C430025 10,8 1,6x1,4 50 10000
KL 114/65 CNKH/10000 C430026 10,8 1,6x1,4 65 10000
Combination nailer For staples (invisible joins in the jaws of the
groove on tongue and groove boards) and
pan-head nails (edges of wood panelling,
decorative or profiled strips and skirting
board)
With depth regulator for adjusting the
insertion depth
Safe to use with contact fuse
Non-slip rubber handle reduces vibrations
and prevents cold hands
Rubber cap for the contact safety catch
prevents damage to sensitive wood
The rubber contact points with anti-slip
function protect sensitive surfaces
Front panel easy to open without tools in the
event of problems
For type SN pan-head nails (16-40 mm) and
type 90 staples (15-40 mm)
Scope of delivery: in Systainer; 1000 type SN pan-
head nails, length 40mm; 2000 type 90 staples,
length 30 mm
Type Art. no.
Air
req
uir
e-m
ents
(l/i
mp
act
)
Work
ing
p
ress
ure
(ba
r)
Ma
ga
zin
e ca
pa
city
Wei
gh
t(k
g)
KNG 40 SYS D300044 0,7 4 – 7 125 1,4
Upsetting nail driver For securing wooden ceilings, panels, skirting
board, decorative strips and manufacturing
fences
Compact design, effortless work for long
periods due to low weight
Contact release for rapid working progress
With depth regulator for adjusting the
insertion depth
Front panel easy to open without tools in the
event of problems
Non-slip rubber handle reduces vibrations
and prevents cold hands
Rotatable exhaust air guide
For brad nails type SN, length 16-50 mm
Scope of delivery: in Systainer; Protective
goggles; 5000 type SN pan-head nails,
length 30mm
Type Art. no.
Air
req
uir
e-m
ents
(l/i
mp
act
)
Wo
rkin
g
pre
ssu
re(b
ar)
Ma
ga
zin
e ca
pa
city
Wei
gh
t(k
g)
SNG-SK 50 SYS D300067 1,1 5 – 8 100 1,26
Tackers, staplers and nail guns
208
4 |
Usin
g c
om
pre
sse
d a
ir
Type SN pan-head nails NK = galvanised V2A: stainless steel
Type Art. no.
Wir
e g
au
ge
(mm
)
Len
gth
(mm
)
Pa
cka
gin
g
un
it(p
iece
(s))
SN 113 NK/1000 C520011 0,9x1,2 13 1000
SN 116 NK/1000 C520012 0,9x1,2 16 1000
SN 116 NK/5000 C520002 0,9x1,2 16 5000
SN 120 NK/5000 C520003 0,9x1,2 20 5000
SN 125 NK/1000 C520014 0,9x1,2 25 1000
SN 125 NK/5000 C520004 0,9x1,2 25 5000
SN 130 NK/1000 C520015 0,9x1,2 30 1000
SN 130 NK/5000 C520005 0,9x1,2 30 5000
SN 130 V2A/5000 C521005 0,9x1,2 30 5000
SN 135 NK/5000 C520006 0,9x1,2 35 5000
SN 140 NK/5000 C520008 0,9x1,2 40 5000
SN 150 NK/5000 C520010 0,9x1,2 50 5000
Pin nailer For securing decorative profiles, window
beads and ornamentation
Pin ensures virtually invisible join, subsequent
expansion of holes not necessary
Extremely compact design, effortless work
for long periods due to low weight
Non-slip rubber handle reduces vibrations
and prevents cold hands
Two-stage trigger prevents injuries caused by
tool triggering accidentally
For pin nails type PN, length 15-25 mm
Scope of delivery: in Systainer; Protective goggles
Type Art. no.
Air
req
uir
e-m
ents
(l/i
mp
act
)
Work
ing
p
ress
ure
(ba
r)
Ma
ga
zin
e ca
pa
city
Wei
gh
t(k
g)
PNG-PN 25 SYS D300068 0,3 4 – 7 102 0,95
Push pin NK = galvanised
Type Art. no.
Wir
e g
au
ge
(mm
)
Len
gth
(mm
)
Pa
cka
gin
g
un
it(p
iece
(s))
PN 15-0,6 NK/10000 F440130 0,64 15 10000
PN 18-0,6 NK/10000 F440131 0,64 18 10000
PN 22-0,6 NK/10000 F440132 0,64 22 10000
PN 25-0,6 NK/10000 F440133 0,64 25 10000
Staples, type 347 C = chisel point
NK = galvanised
H = resinated
Type Art. no.
Ba
ck
wid
th(m
m)
Wir
e g
au
ge
(mm
)
Len
gth
(mm
)
Pa
cka
gin
g
un
it(p
iece
(s))
Bu
lk
bu
yin
g(p
iece
(s))
KL 347/10 CNK/2500 C430003 4,55 0,9x0,7 10 2500 25000
KL 347/16 CNK/2500 C430006 4,55 0,9x0,7 16 2500 25000
KL 347/20 CNK/2500 C430008 4,55 0,9x0,7 20 2500 25000
KL 347/25 CNKH/2500 C430010 4,55 0,9x0,7 25 2500 25000
Tackers, staplers and nail guns
209
4 |
Usin
g c
om
pre
sse
d a
ir
T-nail type TN NK = galvanised
Type Art. no.
Wir
e g
au
ge
(mm
)
Len
gth
(mm
)
Pa
cka
gin
g
un
it(p
iece
(s))
TN 22/50 NK/10000 F440014 2,18 50 10000
TN 22/60 NK/10000 F440016 2,18 60 10000
TN 22/63 NK/10000 F440017 2,18 64 10000
Nail strip type RN Round-head nail
In plastic-bound strips
BK = bright
H = resinated
Type Art. no.
Na
il a
ng
le(°
)
Wir
e g
au
ge
(mm
)
Len
gth
(mm
)
Pa
cka
gin
g
un
it(p
iece
(s))
RN 29/65 BKH/3000 F440021 21 2,9 65 3000
RN 31/70 BKH/3000 F440027 21 3,1 70 3000
RN 31/80 BKH/3000 F440024 21 3,1 80 3000
RN 31/90 BKH/3000 F440025 21 3,1 90 3000
RN 34/100 BKH/2000 F440120 21 3,4 100 2000
Tackers, staplers and nail guns
210
4 |
Usin
g c
om
pre
sse
d a
ir
The right gun and compatible accessories for every application.
Our paint spray guns produce an even spray pattern and achieve a high
transfer rate – the foundation for efficient working and cost savings.
Paint spray gunsFlexibility
in every application
211
4 |
Usin
g c
om
pre
sse
d a
ir
Sector: woodworking/painting
Paint spray guns with flow cups or replaceable cups
Paint spray guns with material connection
Paint spray gun with suction cup
D030290 D030206 D030059
D030310; D030011; D030312; D030305
D030400; D030401
D030203 D030194 D030202
Materials Mini-Vario 2 FSP-AZ 2FSP-Optimal
2001FSP-FP-HTE2
FSP-FP-HTE2-WBFSP-W 400
FSP-FP-HTE-MA
FSP-FP 2001 M-MA
FSP-FP-HTE-S
Staining 1.0 / 1.2 1.0 / 1.2 1.3 / 1.5 1.3 / 1.5 / 1.81.3 / 1.4 /
1.6 / 1.8
1.3 / 1.5 /
1.8— 1.3 / 1.5 / 1.8
Glazes 1.0 / 1.2 1.0 / 1.2 1.3 / 1.5 1.0 / 1.3 1.3 / 1.4 1.0 / 1.3 — 1.0 / 1.3
Putty — — 2.2 / 2.5 2.0 / 2.5 / 3.0 / 3.5 — 2.0 / 2.5 — 2.0 / 2.5 / 3.0
Filler — — 1.7 / 1.9 1.3 / 1.5 / 1.81.3 / 1.4 /
1.6
1.3 / 1.5 /
1.8— 1.3 / 1.5 / 1.8
Primer — 1.0 / 1.2 1.3 / 1.5 1.3 / 1.5 / 1.81.3 / 1.4 /
1.6
1.3 / 1.5 /
1.8— 1.3 / 1.5 / 1.8
1-C top coat 1.0 / 1.2 1.0 / 1.2 1.3 / 1.5 1.3 / 1.5 / 1.8 / 2.01.3 / 1.4 /
1.6
1.3 / 1.5 /
1.8 / 2.0— 1.3 / 1.5 / 1.8 / 2.0
2-C top coat 1.0 / 1.2 1.0 / 1.2 1.3 / 1.5 1.3 / 1.5 / 1.8 / 2.01.3 / 1.4 /
1.6
1.3 / 1.5 /
1.8 / 2.0— 1.3 / 1.5 / 1.8 / 2.0
Clear varnishes 1.0 / 1.2 1.0 / 1.2 1.3 / 1.5 1.0 / 1.3 / 1.5 1.3 / 1.41.0 / 1.3 /
1.5— 1.0 / 1.3 / 1.5
Textured paint — —1.9 / 2.2 /
2.51.8 / 2.0 / 2.5 —
1.8 / 2.0 /
2.5— 1.8 / 2.0 / 2.5
Latex paint — — — — — 2.0 / 2.5 2.0 / 2.5 / 3.0 —
Branch: automotive
Paint spray guns with flow cups or replaceable cups
Paint spray guns with material connection
Paint spray gun with suction cup
D030290 D030206 D030059
D030310; D030011; D030312; D030305
D030400; D030401
D030203 D030194 D030202
Materials Mini-Vario 2 FSP-AZ 2FSP-Optimal
2001FSP-FP-HTE2
FSP-FP-HTE2-WBFSP-W 400
FSP-FP-HTE-MA
FSP-FP 2001 M-MA
FSP-FP-HTE-S
Putty — — — 2.0 / 2.5 / 3.0 -- 2.0 / 2.5 — 2.0 / 2.5 / 3.0
Primer — — — 1.3 / 1.5 / 1.81.3 / 1.4 /
1.6
1.3 / 1.5 /
1.8— 1.3 / 1.5 / 1.8
Filler — — — 1.3 / 1.5 / 1.81.3 / 1.4 /
1.6
1.3 / 1.5 /
1.8— 1.3 / 1.5 / 1.8
1-C top coat/ base coat
— — — —1.3 / 1.4 /
1.6— — —
2-C top coat/ base coat
— — — —1.3 / 1.4 /
1.6— — —
Clear varnish — — — — 1.3 / 1.4 — — —
Please ALWAYS consult the paint data sheet of the manufacturer – it contains exact specifications of the nozzle size you need to use
Overview of our
paint spray guns
212
4 |
Usin
g c
om
pre
sse
d a
ir
D030290 D030206 D030059
D030310; D030011; D030312; D030305
D030400; D030401
D030203 D030194 D030202
Mini-Vario 2
FSP-AZ 2
FSP-Optimal
2001
FSP-FP-HTE2,
FSP-FP-HTE2-WB
FSP-W 400
FSP-FP-HTE-MA
FSP-FP 2001
M-MA
FSP-FP-HTE-S
Application
Small surfaces ++ ++ + + + + +Large surfaces + + ++ ++ ++ ++ ++ ++Water-based lacquers ++ + ++ ++ ++ ++ ++Lacquer solvents ++ ++ ++ ++ ++ ++ ++ ++
Features
Stepless round/wide jet regulation
Material flow regulation
Air quantity regulation
VOC-compliant transmission transfer rate (>65%)
Compatible with replaceable cups for fast paint change and storage of residual paint
Nozzle and needle made of high-grade steel or stainless steel/brass – suitable for use with water-based lacquers
Wide range of nozzle sizes
Easy to clean thanks to polished surface
Slotted nozzle for efficient processing and atomisation of latex paints
Compact design for tireless work
Overhead work possible
With material connection for use with material pressure vessel
With flow cup
With suction cup
++ very well suited + well suited available
Overview of our
paint spray guns
213
4 |
Usin
g c
om
pre
sse
d a
ir
Paint guns Versatile spray gun for smaller surfaces
With material quantity adjuster for infinitely
variable adjustment of the material quantity
Infinitely variable spray pattern adjustment
from a narrow to a wide jet
Scope of delivery: With flow cup and 2 suction
cups with adapter
Type Art. no.
Nozz
le Ø
(mm
)
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Wei
gh
t(k
g)
FSP-Mini-Vario 2 D030290 0,7 80-210 1-4 0,4
AccessoriesType Art. no.
Con
ten
ts
Nozz
le Ø
(mm
)
Siz
e
DSZ 0,5 Mini-Vario 2 B030390 Nozzle set 0,5
DSZ 1,0 Mini-Vario 2 B030392 Nozzle set 1,0
DSZ 1,2 Mini-Vario 2 B030393 Nozzle set 1,2
FB 0,25 l-AZ 2 B030365 Flowing cup 0,25 l
Paint guns Suitable for processing water-soluble and
solvent-based materials due to stainless steel
paint nozzle and needle
Infinitely variable spray pattern adjustment
from a narrow to a wide jet
With material quantity adjuster for infinitely
variable adjustment of the material quantity
With air quantity regulator for direct air
quantity regulation on the gun
Low weight and well balanced gun for
effortless work over long periods
Suitable for processing different materials,
assortment of nozzles from dia. 0.5 to 1.2 mm
Gun is quick and easy to clean due to anti-
stick coating
Scope of delivery: nozzle 0.5 mm dia. and flowing
cup 0.25 l
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Wei
gh
t(k
g)
FSP-AZ 2 D030206 130-200 2-4 0,27
AccessoriesType Art. no.
Co
nte
nts
Siz
e
No
zzle
Ø(m
m)
DSZ 0,5 AZ 2 B030361 Nozzle set 0,5
DSZ 0,8 AZ 2 B030362 Nozzle set 0,8
DSZ 1,0 AZ 2 B030363 Nozzle set 1,0
DSZ 1,2 AZ 2 B030364 Nozzle set 1,2
FB 0,25 l-AZ 2 B030365 Flowing cup 0,25 l
Paint spray gunsPainting with flowing cup
214
4 |
Usin
g c
om
pre
sse
d a
ir
Paint guns With stainless steel nozzle and flowing cup
0.5 l with drop stop
With air micrometer for air pressure regulation
directly on the gun
Infinitely variable spray pattern adjustment
from a narrow to a wide jet
With material quantity adjuster for infinitely
variable adjustment of the material quantity
Type Art. no.
Nozz
le Ø
(mm
)
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Wei
gh
t(k
g)
FSP-Optimal 2001-1,5 D030059 1,5 120-150 2-4 0,72
AccessoriesType Art. no.
Con
ten
ts
Nozz
le Ø
(mm
)
Siz
e
DSZ 1,3 Optimal 2001 B030310 Nozzle set 1,3
DSZ 1,5 Optimal 2001 B030311 Nozzle set 1,5
DSZ 1,7 Optimal 2001 B030312 Nozzle set 1,7
DSZ 1,9 Optimal 2001 B030313 Nozzle set 1,9
DSZ 2,2 Optimal 2001 B030314 Nozzle set 2,2
DSZ 2,5 Optimal 2001 B030315 Nozzle set 2,5
FB 0,5 l-Optimal 2001 B030267 Flowing cup 0,5 l
Paint spray gunsPainting with flowing cup
215
4 |
Usin
g c
om
pre
sse
d a
ir
Paint guns HTE2Common features Suitable for processing water-soluble and solvent-based materials
due to stainless steel paint nozzle and needle
Suitable for large surfaces
Extra-fine spray, even with high-viscosity materials
Infinitely variable spray pattern adjustment from a narrow to
a wide jet
Effortless work for long periods due to low weight
The new polished surface of the gun is extremely easy to clean
With material quantity adjuster for infinitely variable adjustment
of the material quantity
VOC-compliant transfer rate
Paint guns Flow cup version Scope of delivery: Flowing cup 0.6 l
Type Art. no.
Nozz
le Ø
(mm
)
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Wei
gh
t(k
g)
FSP-FP-HTE2-1,3 D030311 1,3 200-300 2-3 0,52
FSP-FP-HTE2-1,5 D030310 1,5 200-300 2-3 0,52
FSP-FP-HTE2-1,8 D030312 1,8 200-300 2-3 0,52
Paint guns Compatible with replaceable cup system and
flow cups
Scope of delivery: 3 Replaceable cups 0.6 l;
3 Covers; 3 Plugs
Type Art. no.
Nozz
le Ø
(mm
)
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Wei
gh
t(k
g)
FSP-FP-HTE2 WB D030305 1,5 200-300 2-3 0,54
Changing cup system Suitable for FP-HTE2 and W 400
The paint container can be replaced quickly
without being emptied. This means that
different paints or cleaning agents can be
used with little effort
A simple retainer ring guarantees quick
changing of the vessels
The support adapters (for FP-HTE or W 400)
fit on paint spray guns already on the market,
thus permitting retrofitting
If a paint container is used for storage, it is
sealed with the plug included in the delivery
The mixing scale at the paint container
facilitates exact mixing of paints and lacquers
without a mixing gauge
Cup capacity: 0.6 l
Type Art. no.
Co
nte
nts
WB-Set 5 B030413 5 Cups, 5 Covers, 5 Plugs, 5 Filter 250 μm
WB-Set 50 B030414 50 Cups, 50 Covers, 50 Plugs, 50 Filter 250 μm
AD-FP-HTE B030412 Support adapter
AD-W 400 B030411 Support adapter
F-WB 250 μm /5 B030416 5 Filter 250 μm (standard)
F-WB 125 μm /5 B030415 5 Filter 125 μm (especially for water-based clear varnish)
Paint spray gunsPainting with flowing cup
216
4 |
Usin
g c
om
pre
sse
d a
ir
AccessoriesType Art. no.
Con
ten
ts
Nozz
le Ø
(mm
)
Siz
e
DSZ 1,3 FP-HTE B030012 Nozzle set 1,3
DSZ 1,5 FP-HTE B030013 Nozzle set 1,5
DSZ 1,8 FP-HTE B030014 Nozzle set 1,8
DSZ 2,0 FP-HTE B030015 Nozzle set 2,0
DSZ 2,5 FP-HTE B030016 Nozzle set 2,5
DSZ 3,0 FP-HTE B030017 Nozzle set 3,0
FB 0,6 l-FP-HTE B030018 Flowing cup 0,6 l
Paint guns Suction cup version
Suitable for large surfaces
Suitable for processing water-soluble and
solvent-based materials due to stainless steel
paint nozzle and needle
Extra-fine spray, even with high-viscosity
materials
Infinitely variable spray pattern adjustment
from a narrow to a wide jet
With material quantity adjuster for infinitely
variable adjustment of the material quantity
Scope of delivery: Suction cup 1.0 l
Type Art. no.N
ozz
le Ø
(mm
)
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Wei
gh
t(k
g)
FSP-FP-HTE-S D030202 1,5 80-290 2 0,82
AccessoriesType Art. no.
Con
ten
ts
Nozz
le Ø
(mm
)
DSZ 1,3 FP-HTE-S B030144 Nozzle set 1,3
DSZ 1,5 FP-HTE-S B030145 Nozzle set 1,5
DSZ 1,8 FP-HTE-S B030146 Nozzle set 1,8
DSZ 2,0 FP-HTE-S B030147 Nozzle set 2,0
DSZ 2,5 FP-HTE-S B030148 Nozzle set 2,5
DSZ 3,0 FP-HTE-S B030149 Nozzle set 3,0
Paint spray gunsPainting with flowing cup
217
4 |
Usin
g c
om
pre
sse
d a
ir
Paint guns Suitable for large surfaces
Extra-fine spray and even coating
With material quantity adjuster for infinitely
variable adjustment of the material quantity
Suitable for processing water-soluble and
solvent-based materials because all metal
components are made from stainless steel
Excellent handling due to ergonomic handle
and favourable weight distribution
No excessive strain due to low weight and
minimal trigger force required
Infinitely variable spray pattern adjustment
from a narrow to a wide jet
Chrome-plated gun that is easy to clean and
maintain
With air micrometer for air pressure regulation
directly on the gun
Low noise level of only 79.7 dB(A)
corresponds to European standards
VOC-compliant transfer rate
Type Art. no.
Nozz
le Ø
(mm
)
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Wei
gh
t(k
g)
FSP-W 400-1,3 D030400 1,3 270 2 0,44
FSP-W 400-1,8 D030401 1,8 270 2 0,44
AccessoriesType Art. no.
Con
ten
ts
Nozz
le Ø
(mm
)
Fitt
ed a
ir
cap
Com
pa
t-ib
le w
ith
n
ozz
le d
ia.
(mm
)
Siz
e
DSZ 1,3 W 400/200 B030400 Nozzle set 1,3 B030406/B030407
DSZ 1,4 W 400/200 B030401 Nozzle set 1,4 B030406/B030407
DSZ 1,6 W 400/200 B030402 Nozzle set 1,6 B030406/B030407
DSZ 1,8 W 400/200 B030403 Nozzle set 1,8 B030405/B030407
LK 16 W 400 B030406 Air cap 1,3; 1,4; 1,6
LK 18 W 400 B030405 Air cap 1,8
F-Set-W 400 B030408 Filter
FB 0,6 l-W 400 B030409 Flowing cup 0,6 l
Paint spray gunsPainting with flowing cup
Paint guns Including 3/8 ̋a material connection for use
with material pressure vessels
Suitable for large surfaces
Suitable for processing water-soluble and
solvent-based materials due to stainless steel
paint nozzle and needle
Extra-fine spray, even with high-viscosity
materials
Infinitely variable spray pattern adjustment
from a narrow to a wide jet
Effortless work for long periods due to low
weight
With paint regulation valve and drop stop
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Wo
rkin
g
pre
ssu
re(b
ar)
Wei
gh
t(k
g)
No
zzle
Ø(m
m)
FSP-FP-HTE-MA D030203 100-250 2 0,48 1,5
218
4 |
Usin
g c
om
pre
sse
d a
ir
AccessoriesType Art. no.
Con
ten
ts
Nozz
le Ø
(mm
)
DSZ 1,0 FP-HTE-MA B030420 Nozzle set 1,0
DSZ 1,3 FP-HTE-MA B030421 Nozzle set 1,3
DSZ 1,5 FP-HTE-MA B030422 Nozzle set 1,5
DSZ 1,8 FP-HTE-MA B030423 Nozzle set 1,8
DSZ 2,0 FP-HTE-MA B030424 Nozzle set 2,0
DSZ 2,5 FP-HTE-MA B030425 Nozzle set 2,5
Paint spray gun With 3/8 ̋a material connection for use over
large surfaces in combination with material
pressure vessels
Suitable for colour effect and emulsion
paints
With air quantity regulator for direct air
quantity regulation on the gun
With material quantity adjuster for infinitely
variable adjustment of the material quantity
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Wei
gh
t(k
g)
Nozz
le Ø
(mm
)
Ma
teri
al
con
nec
tion
( ̋)
FSP-FP 2001 M-MA D030194 200 2-4 0,7 2,5 3/8a
AccessoriesType Art. no.
Con
ten
ts
Nozz
le Ø
(mm
)DSZ 2,0 FP 2001 M-MA B030340 Nozzle set 2,0
DSZ 2,5 FP 2001 M-MA B030341 Nozzle set 2,5
DSZ 3,0 FP 2001 M-MA B030342 Nozzle set 3,0
Paint spray gunsPainting with material connection
Viscosity measuring cup Type Art. no.
B-Ford 4 B030079
For determining lacquer viscosity in acc.
with Ford-4 / DIN EN ISO 2431
Measurement of time until the paint
filament tears for the first time
Comparison of viscosity with
manufacturer’s paint specifications
Easy to clean because made completely
of plastic
With 4 mm opening
Breathing mask With 2 replaceable activated carbon filters A1
as per DIN EN 14387 for organic gases and
vapours
With retaining ring and 2 prefilters
Type Art. no.
Co
nte
nts
ATM-A1 D770128 Breathing mask
F-ATM B030157 Spare filter
VF-ATM / 10 B030153 Preliminary filter
219
4 |
Usin
g c
om
pre
sse
d a
ir
Our plaster sprayers are extremely versatile and can be used to spray different materials. We
also offer spray pipes for viscous materials such as emulsion paint, mineral/synthetic plaster
as well as funnel spray guns for processing rough plaster, fibre plaster, chips, etc.
Plaster sprayersVersatile
for different materials
220
4 |
Usin
g c
om
pre
sse
d a
ir
Funnel spray gun For spraying rough plaster, fibre plaster,
chips, etc.
Air flow regulation valve allows perfect
adjustment of air flow rate for the material
being processed. Additional pressure reducer
not required
Suitable for spraying walls and ceilings
(45° adapter included)
Material flow regulation valve for processing
plaster with max. grit size of 3 mm
Large filling hopper for use on large surfaces.
Easy guidance of the gun due to additional
handle on the filling hopper
Locking trigger clip makes work easier
Flowing cup capacity 5 l
Scope of delivery: Standard features include:
nozzle dia. 4, 6 and 8 mm for plaster and nozzle
dia. 15 and 18 mm for chips, etc.
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Wei
gh
t(k
g)
TSP D030063 225 5 1,26
AccessoriesType Art. no.
Con
ten
ts
Nozz
le Ø
(mm
)
Siz
e
ED 4,5 HW-TSP B030350 Nozzle 4,5
ED 6,0 HW-TSP B030351 Nozzle 6,0
ED 8,0 HW-TSP B030352 Nozzle 8,0
ED 15,0 HW-TSP B030353 Nozzle 15,0
ED 17,5 HW-TSP B030354 Nozzle 17,5
FB 5,0 l-HW-TSP B030355 Flowing cup 5,0 l
Spray pipe For viscous materials, such as emulsion
paint, mineral and plastic plaster
Material connector with claw coupling
V2A steel nozzles with 2 mm air holes
Material and air stop cock
Type Art. no.
Len
gth
(mm
)
Air
req
uir
e-m
ents
(l/m
in)
Wei
gh
t(k
g)
Nozz
le Ø
(mm
)
SPR 330-6,5 D900514 330 300 1,2 6,5
Spray pipe For viscous materials, such as emulsion
paint, mineral and plastic plaster
Material connector with claw coupling
V2A steel nozzles with 2 mm air holes
Material and air stop cock
Scope of delivery: Systainer set including nozzles
4.5/6.5/8.5/10.5 mm and cleaning brush
Type Art. no.
Len
gth
(mm
)
Air
req
uir
e-m
ents
(l/m
in)
Wei
gh
t(k
g)
No
zzle
Ø(m
m)
SPR 215-6,5 D900521 215 300 0,9 6,5
SPR 215-8,5 D900529 215 300 0,9 8,5
SPR-Set 215 SYS D900621 215 300 0,9 4,5-10,5
Plaster spraying devices
221
4 |
Usin
g c
om
pre
sse
d a
ir
AccessoriesType Art. no.
Con
ten
ts
Len
gth
(mm
)
Nozz
le Ø
(mm
)
SRV-V800 D900525 Spray pipe extension, for spraying walls and ceiling up to 3 m height
800
SPW 70° D900527 Spraying angle 70°, for easy work in corners and tight spaces
ED 4,5-2 SPR B030175 Nozzle 4,5
ED 6,5-2 SPR B030176 Nozzle 6,5
ED 8,5-2 SPR B030177 Nozzle 8,5
ED 10,5-2 SPR B030178 Nozzle 10,5
ED 2,0 SPR B030179 Nozzle 2,0
ED 4,5-1 SPR B030189 Nozzle 4,5
ED 6,5-1 SPR B030186 Nozzle 6,5
ED 8,5-1 SPR B030187 Nozzle 8,5
ED 10,5-1 SPR B030188 Nozzle 10,5
Plaster spraying devices
222
4 |
Usin
g c
om
pre
sse
d a
ir
Due to the low air requirements, these spray guns can be used with small compressors and
are therefore particularly economical.
Spray gunsSimple handling
thanks to compact design
223
4 |
Usin
g c
om
pre
sse
d a
ir
Spray gun Handy aluminium spray gun
With material and air flow regulation
Suction cup with large filler opening.
Easy to clean
Type Art. no.
Work
ing
p
ress
ure
(ba
r)
Air
req
uir
e-m
ents
(l/m
in)
Wei
gh
t(k
g)
Tan
k v
ol.
(l)
SPP-SM D040008 3-6 120-220 0,64 1,0
Accessories Type Art. no.
Suction cup SB 1,0 l-SM B040007
Spray gun Swivelling nozzle head sprays in all directions
without the user having to tilt the gun – all
material sprayed out without leaving residues
Effective, low-mist material atomisation
High-quality spray gun with 0.7 l Hostalen
vessel
Robust cup with light weight
Filling level visible from outside thanks to
transparent cup
Type Art. no.W
ork
ing
p
ress
ure
(ba
r)
Air
req
uir
e-m
ents
(l/m
in)
Wei
gh
t(k
g)
Tan
k v
ol.
(l)
SPP-SE D040006 1-10 50-150 0,86 0,7
Spraying lance Including 3/8 ̋a material connection for use
with material pressure vessels
Spraying, disinfecting, impregnating, cleaning
For liquids that have to be atomised, such
as wood preservatives, wallpaper stripping
agents, for disinfecting and impregnating
With universal nozzle, hand valve and locking
device for trigger
Type Art. no.
Ma
teri
al
con
nec
tion
( ̋)
Len
gth
(mm
)
SPL 750 D900512 3/8a 750
Spray guns
224
4 |
Usin
g c
om
pre
sse
d a
ir
Special gunEasy to use
even in areas that are difficult to access
An impressive special gun that not only has an ergonomic, compact design, but
is also extremely lightweight. The 900 mm spray hose can reach even the most
awkward areas with limited access.
Combination gun For standard adapters with 40 mm cord
thread
Scope of delivery: Standard features include:
90 cm spray hose
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Wei
gh
t(k
g)
UHW 2000 D040052 120 – 180 4 – 6 0,53
225
4 |
Usin
g c
om
pre
sse
d a
ir
Our blasting devices can be used for blasting, derusting, roughening up, removing
surface layers, matting, hardening, etc. You are sure to find the right product for your
application here.
Blasting devicesFlexible use
with different blasting abrasives
226
4 |
Usin
g c
om
pre
sse
d a
ir
D030030 D030025 D030262
SSP- Strahlfix SSP-SAV SSP-SAW 4 SYS
Application frequency Occasional use Occasional to frequent use Frequent use
Application
Blasting with metallic blasting abrasives ++Blasting with mineral blasting abrasives ++ ++Blasting with organic blasting abrasives ++ ++ ++Blasting with glass/ceramic beads ++ ++ ++Derusting ++ ++ ++Roughing/matting ++ ++ ++Hardening ++
Features
Fast and simple nozzle change because no tools are needed ++ ++ ++
Fast and simple refilling of the blasting abrasive through cups with bayonet coupling ++ ++ ++
Additional suction hose for direct extraction of the blasting abrasive from buckets or sacks
130 cm
Nozzle of hardened steel guarantees longer ser-vice life, less wear and fewer nozzle changes ++
Nozzle of tungsten carbide guarantees very long service life, minimal wear and fewer nozzle changes
++
Systainer packaging offers good protection and transport option ++
Nozzle size 5 mm 5 mm 6 mm
++ very well suited
Overview of our
blasting devices
227
4 |
Usin
g c
om
pre
sse
d a
ir
Spray gun For blasting abrasive with grit up to 0.8 mm
Suction cup (1 l) with bayonet coupling for
rapid filling
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Gri
t
Nozz
le Ø
(mm
)
Wei
gh
t(k
g)
SSP-Strahlfix D030030 150 6,0 max. 0,8 5 0,64
Accessories Type Art. no.
Nozzle ED-Strahlfix B030030
Nozzle ED-Set-Strahlfix B030029
Spray gun With hardened jet nozzle
Suction cup (1 l) with bayonet coupling
for rapid filling
For blasting abrasive with grit up to 0.8 mm
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Gri
t
Nozz
le Ø
(mm
)
Wei
gh
t(k
g)
SSP-SAV D030025 280 7 max. 0,8 5 0,8
Accessories Type Art. no.
Nozzle ED 5,0 SAV B030026
Spray gun For blasting abrasive with grit up to 0.8 mm
Suction cup (1 l) with bayonet coupling for
rapid filling
Nozzle made of carbide
Scope of delivery: in Systainer; Standard features
include: hose 130 cm for direct removal from
containers or sacks
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Wo
rkin
g
pre
ssu
re(b
ar)
Gri
t
No
zzle
Ø(m
m)
Wei
gh
t(k
g)
SSP-SAW 4 SYS D030262 320-400 7 max. 0,8 6 0,88
Accessories Type Art. no.
Nozzle ED-SAW 4 B030399
Blasting devices
228
4 |
Usin
g c
om
pre
sse
d a
ir
Pressure spray gun For use with pressure blasting device DSG
10, material pressure vessel MDB 24 ZN and
MDB 40 V4A
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Wei
gh
t(k
g)
Nozz
le Ø
(mm
)
SSP-DSP D030034 300 0,66 5
Pressure blasting device Galvanised 24 l vessel with all the necessary
safety fittings
Water separator at the air inlet and pressure
reducer for adjusting the material pressure
For blasting abrasive with grit up to 0.8 mm
Scope of delivery: Pressure vessel, blasting hose
unit 10 m, pressure spray gun
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Ma
teri
al
pre
ssu
re(b
ar)
Wei
gh
t(k
g)
Tan
k v
ol.
(l)
Gri
t
DSG 10 D040096 250-300 5 – 8 0,5-2,0 27 24 0,2-0,8
Accessories Type Art. no.
Nozzle ED-DSG B030028
Material hose SL-Set-M12,7-D6/5m D740009
Material hose SL-Set-M12,7-D6/10m D740010
Spray protective hood Type Art. no.
STSH D770121
Robust plastic housing
Large, replaceable glass observation
window
Neck protection
Accessories for sand blasting, general Type Art. no.
SBE-Acetat 90x110 STSH G526002
SBE-Min-glas 90x110 STSH G526003
Blasting abrasive Type Art. no.
STM-HOS 7,0 B030031
Ground blast furnace slag
Grain 0.2 – 0.8 mm
Does not cause silicosis
Suitable for all listed spray guns and
devices
Contents 7.0 kg
Blasting devices
229
4 |
Usin
g c
om
pre
sse
d a
ir
Our extremely versatile material pressure vessels are suitable for processing paint, lacquers
and varnishes, priming, sandblasting and staining, for cleaning agent, wallpaper stripper or
spraying plaster and numerous other application areas.
Material pressure vesselsParticularly suitable for
large surfaces
230
4 |
Usin
g c
om
pre
sse
d a
ir
MDB-FDB 2 MDB 10 MDB 24 MDB 24 ZN MDB 40 V4A
D040056 D040055 D040061 D040063 D040086
Application
Latex paint ++ ++ ++ ++ ++Colour or multiple
effect paints ++ ++ ++ ++ ++Wallpaper solvent ++ ++ ++ ++ ++Impregnation ++ ++ ++ ++ ++Penetrating stopper material ++ ++ ++ ++ ++Glazes ++ ++ ++ ++ ++Cleaning agent ++ ++ ++ ++ ++Primer ++ ++ ++ ++ ++Top coat ++ ++ ++ ++ ++Spraying plaster ++ ++Liquid woodchip ++ ++Concrete primer ++ ++Sand blasting ++ ++Cotton, textile fibre and
cellulose plaster ++++ very well suited
Overview of our
material pressure vessels
231
4 |
Usin
g c
om
pre
sse
d a
ir
Paint pressure vessel For spraying paint, lacquers and varnishes
using paint spray guns or a spray lance
Pressure reducer allows perfect adjustment
of material pressure for the material being
processed
Stainless aluminium vessel for a long
service life
Base strengthened by metal ring
Handle for carrying the vessel during the
spraying process
Safety valve on the screw cap provides
additional protection for the user
Large screw cap makes the vessel easy to fill
and clean
Compressed air supply interrupted at the air
inlet valve. The hose can remain connected
Scope of delivery: Standard features include:
multi-purpose material hose, length 1.5 m
Type Art. no.
Work
ing
p
ress
ure
(ba
r)
Tan
k v
ol.
(l)
Wei
gh
t(k
g)
MDB-FDB 2 D040056 0-4 2 1,4
Material pressure vessels Material connector 3/8 ̋a with internal cone
Standard features include: pressure reducer
for material pressure adjustment, vessel
bleed valve
Scope of delivery: Vessel bleed valve
Type Art. no.
Work
ing
p
ress
ure
(ba
r)
Tan
k v
ol.
(l)
Wei
gh
t(k
g)
Pre
ssu
re
red
uce
r
MDB 10 D040055 6 10 3,4
Farbboy Robust frame for extra stability
Large wheels for easy transportation
Material connector 3/8 ̋a
Scope of delivery: Standard features include:
pressure reducer and pressure gauge for
material pressure adjustment
Type Art. no.
Wo
rkin
g
pre
ssu
re(b
ar)
Tan
k v
ol.
(l)
Inte
rio
r ta
nk
vo
l.(l
)
Wei
gh
t(k
g)
MDB 24 D040061 8 24 16 18,6
Material pressure vessels
232
4 |
Usin
g c
om
pre
sse
d a
ir
Spritzboy Robust frame for extra stability
Large wheels for easy transportation
2 pressure reducers with pressure gauges for
adjusting the material and working pressure
Water separator at air inlet
2 material connectors (1 large claw coupling,
1 x connecting thread 3/8 ̋a)
Spritzboy 40: with V4A vessel
Spritzboy 24: with galvanised vessel
Type Art. no.
Work
ing
p
ress
ure
(ba
r)
Tan
k v
ol.
(l)
Inte
rior
tan
k
vol.
(l)
Wei
gh
t(k
g)
MDB 24 ZN D040063 8 24 16 25,5
MDB 40 V4A D040086 8 40 - 27
Combination material hose For material pressure vessels Resistant against diluting agents
Type Art. no.
Ma
teri
al
con
nec
tion
( ̋)
Len
gth
(m)
Ma
teri
al
hose
(mm
)
Air
hose
(mm
)
SL-Set-M13-D10-10m D740008 3/8i 10 13x4 10x2,7
DLS-Set-M9-D10-5m D740002 3/8i 5 9x3,5 10x2,7
SL-Set-M19-D9-8m D740052 3/8i 8 19x4 9x3
Material pressure hose For material pressure vessels Resistant against diluting agents
Type Art. no.
Ma
teri
al
con
nec
tion
( ̋)
Len
gth
(m)
Ma
teri
al
hose
(mm
)
SL 15x9/10m D740006 3/8i 10 9x3
Material pressure plate Type Art. no.
MDP-V2A B012087
Self-sealing pressure plate made
of V2A steel guarantees even pressure
distribution in the spray boy
With ball for automatic sealing of the
empty vessel to prevent inleaked air
entering the material hose
Material pressure vessels
233
4 |
Usin
g c
om
pre
sse
d a
ir
The cartridge guns can be adjusted individually to suit the relevant application – the infinitely
variable speed control regulates the quantity of material delivered with precision.
In addition, the material stop function prevents the material from dripping and therefore
helps keep your workplace clean.
Cartridge gunsSimple metering –
tidy work
234
4 |
Usin
g c
om
pre
sse
d a
ir
D040118 D040138 D040137 D040130
KTP 310 DR KTP 310 ALU KTP 310 SIP 600
Application
Grouting ++ ++ ++ ++Jointing ++ ++ ++ ++
Material container
310 ml plastic cartridges ++ ++ ++310 ml aluminium cartridges ++310 ml bag ++600 ml bag ++
Material type
Silicone ++ ++ ++ ++Acrylic ++ ++ ++ ++Window adhesive ++ ++ ++ ++Sealant ++ ++ ++ ++Grease ++ ++ ++ ++
Features
Maximum diameter of the cartridges/bags 50 mm 50 mm 50 mm 50 mm
Quick-vent valve prevents material from
dripping
Precision regulation of material quantity and
speed
Union nut with rubber coating prevents surface
damage
Smooth surface for quick and easy cleaning
Compact design for tireless work
Central handle
Rotary grip for flexible handling and simple
change of direction
Safety chain on piston prevents injury through
sudden ejection of the piston
++ very well suited available
Overview of our
cartridge guns
235
4 |
Usin
g c
om
pre
sse
d a
ir
Cartridge gun For standard 310 ml plastic cartridges
Infinitely variable speed regulation for dosing
the material correctly
With quick bleed valve to prevent the material
from dripping
Rotary cartridge holder for easier working
With large high-quality thread for quick and
easy cartridge changes
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Wei
gh
t(k
g)
KTP 310 DR D040118 60 10 0,46
Cartridge gun For aluminium and plastic cartridges as well
as pouches up to 310 ml
Telescope piston
Infinitely variable speed regulation for dosing
the material correctly
With quick bleed valve to prevent the material
from dripping
Rotary cartridge holder for easier working
With large high-quality thread for quick and
easy cartridge changes
Type Art. no.A
ir r
equ
ire-
men
ts(l
/min
)
Work
ing
p
ress
ure
(ba
r)
Wei
gh
t(k
g)
KTP 310 ALU D040138 100 8 0,98
Cartridge gun For standard 310 ml plastic cartridges
Central handle design and perfect balance
With quick bleed valve to prevent the material
from dripping
Infinitely variable speed regulation for dosing
the material correctly
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Wei
gh
t(k
g)
KTP 310 D040137 100 8 1,04
Pouch gun For standard silicone pouches up to 600 ml
Infinitely variable speed regulation for dosing
the material correctly
Central handle design and perfect balance
With quick bleed valve to prevent the material
from dripping
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Wo
rkin
g
pre
ssu
re(b
ar)
Wei
gh
t(k
g)
SIP 600 D040130 100 8 1,32
Cartridge guns
236
4 |
Usin
g c
om
pre
sse
d a
ir
Our diverse portfolio of different blowing guns offers the right solution for every
requirement – from the classic version with a lightweight metal or solid plastic housing
to the variant with silent nozzle or fan jet nozzle and the blow gun with 500 mm blast
pipe for reaching places with limited access.
Blowing gunsVersatile
and ergonomic
237
4 |
Usin
g c
om
pre
sse
d a
ir
D740015 D740145 D740115 D740017 D740144 D740142D740141D740148
D740140 D740143 D740035
AP-BM-SN AP-BM-SAP-BM-SNV100
BM-T9 AP-Vario-P AP-Vario-FAP-Vario-L,AP-Vario-
L-500AP-Vario-S AP-Vario-V AP-Soft
Application options
General blowing out work ++ ++ ++ ++ +Small openings/recesses ++ ++ +Reduced noise ++ ++Delicatesurfaces ++ ++Locations with limited access ++ ++ ++ + + ++Large surfaces + + ++ ++Drying – wide spray jet ++ +Increased air volume thanks to venturi nozzle ++
Equipment features
Connection with hose nozzle directly at the hose
Meterable
Anti-block nozzle –air flow free of blockages even when nozzle is applied
++ very well suited + well suited available
Overview of our
blowing guns
238
4 |
Usin
g c
om
pre
sse
d a
ir
Blowing gun Light alloy model
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Wei
gh
t(k
g)
AP-BM-SN D740015 78 4-6 0,26
Blowing gun Light alloy model
With safety and noise reduction nozzle
Extremely quiet for drastically improved
working conditions. The deeper recessed air
hole does not block
Extremely effective concentric blowing effect.
The blowing force produced is up to 2.5 times
greater than the force generated by a classic
single-hole blowing nozzle
Type certificate for noise reduction according
to OSHA regulations and the Swiss Accident
Insurance Fund (SUVA)
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Wei
gh
t(k
g)
AP-BM-S D740145 234 4-6 0,28
Blowing gun Light alloy model With extension 100 mm
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Wei
gh
t(k
g)
AP-BM-SNV100 D740115 180 4-6 0,31
Blowing gun Light alloy model With nozzle for hose dia. 9 mm
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Wo
rkin
g
pre
ssu
re(b
ar)
Wei
gh
t(k
g)
AP-BM-T9 D740017 78 4-6 0,26
Blowing guns
239
4 |
Usin
g c
om
pre
sse
d a
ir
Blowing gun Nozzle with anti-block function. Air flow
cannot be blocked when the nozzle is applied
Stepless trigger for accurate dosage of
compressed air
Solid plastic casing prevents cold hands
Extremely quiet due to silent nozzle
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Wei
gh
t(k
g)
AP-Vario-S D740140 162 4-6 0,14
Blowing gun Suitable for farming applications
500 mm pipe allows for convenient use in
places with limited access e.g. blowing out
coolers on combine harvesters, clearing
loading areas, etc.
Stepless trigger for accurate dosage of
compressed air
Solid plastic casing prevents cold hands
Lower risk of whipped up dirt particles
entering the eyes
Convenient operation in standing position
Type Art. no.A
ir r
equ
ire-
men
ts(l
/min
)
Work
ing
p
ress
ure
(ba
r)
Wei
gh
t(k
g)
AP-Vario-L-500 D740148 380 8 0,16
Blowing gun 300 mm blast pipe can also reach into
awkward spots
Stepless trigger for accurate dosage of
compressed air
Solid plastic casing prevents cold hands
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Wei
gh
t(k
g)
AP-Vario-L D740141 222 4-6 0,16
Blowing gun Fan jet nozzle suitable for large surfaces
Stepless trigger for accurate dosage of
compressed air
Solid plastic casing prevents cold hands
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Wo
rkin
g
pre
ssu
re(b
ar)
Wei
gh
t(k
g)
AP-Vario-F D740142 348 4-6 0,10
Blowing guns
240
4 |
Usin
g c
om
pre
sse
d a
ir
Blowing gun Venturi nozzle increases the air flow rate by 100 %
Stepless trigger for accurate dosage of
compressed air
Solid plastic casing prevents cold
hands
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Wei
gh
t(k
g)
AP-Vario-V D740143 222 4-6 0,14
Blowing gun Suitable for sensitive surfaces
Nozzle tip with removable rubber casing
prevents scratches
Stepless trigger for accurate dosage of
compressed air
Solid plastic casing prevents cold hands
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Wei
gh
t(k
g)
AP-Vario-P D740144 222 4-6 0,12
Blowing gun Handy blasting device for minor blasting
tasks
3 m spiral hose for extra flexibility
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Work
ing
p
ress
ure
(ba
r)
Wei
gh
t(k
g)
AP-Soft D740035 192 4-6 0,18
Blowing gun Light alloy model With blast pipe extension, 100 mm
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Wo
rkin
g
pre
ssu
re(b
ar)
Wei
gh
t(k
g)
AP-RSV 100 D740021 324 4-6 0,14
Blowing gun Light alloy model
Type Art. no.
Air
req
uir
e-m
ents
(l/m
in)
Wo
rkin
g
pre
ssu
re(b
ar)
Wei
gh
t(k
g)
AP-RS D740020 180 4-6 0,10
Blowing guns
241
4 |
Usin
g c
om
pre
sse
d a
ir
Choose between our standard or professional tyre inflators with or without calibration function
and select any version of calibrated tyre inflator between 6 and 12 bar with safety valve clip,
self-retaining valve connector or filling station plug (double-sided valve connector) and different
available hose lengths.
Tyre pressure gaugesFor precise
and simple work
242
4 |
Usin
g c
om
pre
sse
d a
ir
Tyre pressure gauge 6 bar Tyre pressure gauge 12 bar
MEHRWERT
BENEFIT
WARTOŚĆ D
OD
AN
A VALO
R A
ÑAD
IDO
MEHRWERT
BENEFIT
WARTOŚĆ D
OD
AN
A VALO
R A
ÑAD
IDO
Benefit from our innovative modular tyre inflator system and configure your own model based on our two
tyre pressure gauges RF 6 and RF 12 and different hoses. Both tyre pressure gauges are extremely robust,
resistant to impacts and drive-over-proof. The innovative operating concept allows for high-precision
metering.
The RF 6 XG tyre pressure gauge is one of our EXTRA products – an innovative valve
connector allows for simple inflation and deflation of the tyre with one hand and prevents
the tyre from losing pressure when the connector is detached.
Tyre pressure gaugeRF 6
Tyre pressure gaugeRF 6 XG (D004020)
0.6 m hose with patented valve connector
1.5 m hose with safety valve clip
(hose SL-1.5m-kpl-M)
2.5 m hose with safety valve clip
(hose SL-2.5m-kpl-M)
0.8 m hose with filling station plug (hose SL-0.8m-DV)
Tyre pressure gaugeRF 6 MG 1.5 (D004023)
Tyre pressure gaugeRF 6 MG 2.5 (D004024)
Tyre pressure gaugeRF 6 DVG 0.8 (D004025)
Tyre pressure gaugeRF 12
Tyre pressure gaugeRF 12 MG (D004021)
Tyre pressure gaugeRF 12 MG 2.5 (D004026)
Tyre pressure gaugeRF 12 DVG 0.8 (D004027)
G = calibrated
M = safety valve clip
Seven different variants –
The modular tyre inflator system
243
4 |
Usin
g c
om
pre
sse
d a
ir
D040011 D004011 D004009 D004020 D004021
RF-RM RF-RMG-K RF-RMG RF 6 XG RF 12 MG
Safety valve clipRocker arm connector
Filling station plugSchneider
valve connectors (patented)
Safety valve clip
Application
Pass. car / agricultural machinery ++ ++
Lorries ++
Motorcycle/scooter + ++
Pass. car, private use ++ ++ ++ ++ ++
Bicycle ++ ++ ++ ++ ++Equipment features
Calibrated pressure gauge
No pressure loss when valve connector is removed
Precise metering with two separate buttons
Impact-resistant pressure gauge
High air flow rate
One-hand operation - self-retaining valve connector
Kink-proof hose
Pressure gauge scale 0.7 - 6 bar for easy precision readings
Pressure gauge scale 0.7 - 12 bar
Pressure gauge diameter 60 mm 80 mm 80 mm 80 mm 80 mm
Hose length 38 cm 40 cm 50 cm 60 cm 150 cm
Hose rotating adapter prevents twisting and kinking
++ very well suited + well suited available
Overview of our
tyre pressure gauges
244
4 |
Usin
g c
om
pre
sse
d a
ir
Tyre pressure gauge “calibrated” For rapid working progress without pressure loss
Common features Robust tyre inflator with first-class pressure gauge technology
Completely shockproof and impact-resistant for a long service life
Simple inflation and deflation and precise metering thanks to the
innovative operating concept
Optimised, exact reading via pressure gauge display 0.7-6.0 bar
Precise and efficient tyre inflation procedure
Rotary hose connection
Kink-proof, flexible hoses
Calibrated
RF 6 XG Suitable for inflating tyres on passenger vehicles and vans up to a pressure of 6 bar
Avoids pressure loss thanks to innovative, patent-registered valve connector – subsequent
checking of tyre pressure no longer required
Fast and simple work thanks to one-hand operation and valve connector that holds on its own
Simple handling: attach – fill – disconnect
0.6 m long hose for comfortable, flexible work
REMARK: max. system pressure 7,5 bar
RF 6 MG 1,5 Suitable for inflating tyres on passenger vehicles and vans up to a pressure of 6 bar
Simple operation thanks to straight plug-in valve
1.5 m hose for efficient working progress
RF 6 MG 2,5 Ideal for inflating tyres on passenger cars, motorcycles, vans, etc. up to a tyre pressure of 6 bar
Simple operation thanks to straight plug-in valve
2.5 m long hose for increased safety distance
RF 6 DVG 0,8 Ideal for filling stations and inflating motorcycle tyres up to a pressure of 6 bar
With valve connector on both sides for ease of use
0.8 m long hose for comfortable, flexible work
Tyre pressure gauges
Type Art. no.
Wo
rkin
g
pre
ssu
re(b
ar)
Ma
x. w
ork
ing
p
ress
ure
(ba
r)
Tem
per
atu
re-
resi
sta
nt
up
to
(°C
)
Ho
se l
eng
th(c
m)
Wei
gh
t(k
g)
RF 6 XG D004020 0,7-6 7,5 -20 – +60 60 0,8
RF 6 MG 1,5 D004023 0,7-6 7,5 -20 – +60 150 0,8
RF 6 MG 2,5 D004024 0,7-6 7,5 -20 – +60 250 0,8
RF 6 DVG 0,8 D004025 0,7-6 7,5 -20 – +60 80 0,8
245
4 |
Usin
g c
om
pre
sse
d a
ir
Tyre pressure gauge “calibrated” For the precision inflation of tyres on lorries and commercial vehicles
Common features Robust tyre inflator with first-class pressure gauge technology
Completely shockproof and impact-resistant for a long service life
Simple inflation and deflation and precise metering thanks to the
innovative operating concept
Precise and efficient tyre inflation procedure
With pressure gauge display 0.7-12 bar
Rotary hose connection
Kink-proof, flexible hoses
Calibrated
RF 12 MG Ideal for lorries and other commercial vehicles up to a maximum tyre pressure of 12 bar
1.5 m long hose for increased safety distance when inflating lorry tyres
Simple operation thanks to straight plug-in valve
RF 12 MG 2,5 Ideal for lorries and other commercial vehicles up to a maximum tyre pressure of 12 bar
2.5 m long hose for increased safety distance
Simple operation thanks to straight plug-in valve
RF 12 DVG 0,8 Suitable for inflating twin tyres or use at filling stations
0.8 m long hose for comfortable, flexible work
With valve connector on both sides for ease of use
Type Art. no.
Wo
rkin
g
pre
ssu
re(b
ar)
Ma
x. w
ork
ing
p
ress
ure
(ba
r)
Tem
per
atu
re-
resi
sta
nt
up
to
(°C
)
Ho
se len
gth
(cm
)
Wei
gh
t(k
g)
RF 12 MG D004021 0,7-12 15 -20 – +60 150 0,8
RF 12 MG 2,5 D004026 0,7-12 15 -20 – +60 250 0,8
RF 12 DVG 0,8 D004027 0,7-12 15 -20 – +60 80 0,8
Tyre pressure gauges
246
4 |
Usin
g c
om
pre
sse
d a
ir
Accessories Type Art. no.
Nozzle ED-Set-RM B040160
Hose SL-1,5m-kpl-M B004020
Hose SL-2,5m-kpl-M B004021
Hose SL-0,8m-DV B004022
Valve VTL-G1/4a x G1/4i-6bar B004023
Tyre pressure gauge Ideal for home use
Pressure gauge dia. 60 mm with rubber protection
Safety valve clip
Scope of delivery: Standard features include
3 replaceable nozzle attachments
Type Art. no.
Work
ing
p
ress
ure
(ba
r)
Hose
len
gth
(cm
)
Wei
gh
t(k
g)
Pre
ssu
re
ga
ug
e d
ia.
(mm
)
RF-RM D040011 7 41 0,40 63
Tyre pressure gauge For precise and simple work
Robust model in aluminium
Pressure gauge 80 mm dia. with rubber
protection
Connecting hose with rotating adapter
RF-RMG-K features: rocker arm connector
RF-RMG features: double-sided valve
connector
Type Art. no.
Work
ing
p
ress
ure
(ba
r)
Hose
len
gth
(cm
)
Wei
gh
t(k
g)
Pre
ssu
re
ga
ug
e d
ia.
(mm
)
RF-RMG D004009 0-12 46 + 30 0,90 80
RF-RMG-K D004011 0-12 45 0,70 80
Tyre pressure gauges
247
4 |
Usin
g c
om
pre
sse
d a
ir
Air lubricator Precision air lubricator
Adjustable via needle valve
Cannot be used with impacting compressed
air tools
Type Art. no.
Nom
ina
l p
ress
ure
(ba
r)
Dim
en-
sion
s(m
m)
LOE-P 3/8 D640072 16 71,5 x 47
Plug nipple Prevents twisting of the air hose during work
Type Art. no.
Ma
ins
sup
ply
STNP-R1/4a E700220 R 1/4 ̋a R 1/4 ̋a
Breathing mask With 2 replaceable activated carbon filters A1
as per DIN EN 14387 for organic gases and
vapours
With retaining ring and 2 prefilters
Type Art. no.
Con
ten
tsATM-A1 D770128 Breathing mask
F-ATM B030157 Spare filter
VF-ATM / 10 B030153 Preliminary filter
Pressure controller With pressure gauge and plug nipple
For all paint spray guns, for regulating
the input pressure
Type Art. no.
Work
ing
p
ress
ure
(ba
r)
Ma
ins
sup
ply
DM-FSP 1/4i D202105 10 R 1/4 ̋ i
Lubricants/oil Type Art. no.
OEMIN-DLW 0,1 E771130
OEMIN-DLW 1,0 B770000
Tool oil for daily use
Impact tools, in particular, should be
oiled every day via the plug nipple
Using compressed air accessories
248
4 |
Usin
g c
om
pre
sse
d a
ir
1
1
2 3
4
Are you considering installing a complete new compressed air solution? Do you wish to retrofit an
existing system? Or are you planning on purchasing another product?
Irrespective of where you require support – we will be glad to help at any time and offer you personal
advice eared specifically towards your individual company requirements. Our nationwide team of experts
will support you on the telephone and with the planning of your compressed air system on site.
We will take close and thorough consideration of the available space and your specific compressed
air requirements. and then create the perfect compressed air solution to match your application.
We will be glad to assist you further:
Telephone: +49 (0)7121 959-222 Domestic Sales+49 (0)7121 959-161 Export Sales
Fax: +49 (0)7121 959-151E-mail: [email protected]
Screw compressors
1Pistoncompressors
1Compressed air purification
2Pipe systems
3Compressed air tools
4
We would also be glad to help you
design your compressed air system
249 Ap
pe
nd
ix
A222001 4011666900258 Compressor CPM 320-10-18 W 150102A222002 4011666900265 Compressor CPM 160-8-2 W-oilfree 150102A222003 4011666900272 Compressor CPM 212-10-2 W 150102A222006 4011666900555 Compressor CPM 250-10-12 W 150102A222007 4011666900562 Compressor CPM 200-8-12 W-oilfree 150102A222008 4011666900579 Compressor CPM 560-10-20 D 150102A222009 4011666900586 Compressor CPM 400-10-20 W 150102A222010 4011666901415 Compressor CPM 160-8-6 W-oilfree 150102A222011 4011666912817 Compressor CPM 342-10-20 W 150102A222012 4011666912824 Compressor CPM 300-10-20 W 150102A333001 4011666900289 Compressor SEM 255-10-50 W 150103A333002 4011666900296 Compressor SEM 100-8-6 W-oilfree 150103A333003 4011666900302 Compressor SEM 200-8-6 W-oilfree 150103A333004 4011666900609 Compressor SEM 50-8-9 W 150103A333005 4011666900616 Compressor SEM 30-8-4 W 150103A333006 4011666900623 Compressor SEM 320-10-60 W 150103A444001 4011666900319 Compressor PEM 240-10-10 B 150104A444002 4011666900593 Compressor PEM 500-15-50 B 150104A555004 4011666912503 Compressor ZPM 97-15-2 W 150105A711000 4011666922199 Compressor UNM 210-8-25 W 150108A711001 4011666922205 Compressor UNM 210-8-25 WXOF 150109A712000 4011666922212 Compressor UNM 260-10-50 W 150108A712001 4011666922229 Compressor UNM 260-10-50 WX 150109A713000 4011666922236 Compressor UNM 410-10-50 W 150108A713001 4011666922243 Compressor UNM 410-10-50 WX 150109A713010 4011666929655 Compressor UNM 410-10-50 D 150108A713011 4011666929662 Compressor UNM 410-10-50 DX 150109A714000 4011666922250 Compressor UNM 510-10-90 D 150108A714001 4011666922267 Compressor UNM 510-10-90 DX 150109A715000 4011666922274 Compressor UNM 660-10-90 D 150108A715001 4011666922281 Compressor UNM 660-10-90 DX 150109A715100 4011666929679 Compressor UNM 580-15-90 D 150108A715101 4011666929693 Compressor UNM 580-15-90 DX 150109A888008 4011666907332 Mobile Compressed Air System MAS 650-10-90 D 153101A888009 4011666907998 Mobile Compressed Air System MAS 575-15-60 D 153101A888010 4011666907349 Mobile Compressed Air System MAS 650-10-90 D-Silent 153101B004020 4011666923189 Hose SL-1,5m-kpl-M 278401B004021 4011666923196 Hose SL-2,5m-kpl-M 278401B004022 4011666928955 Hose SL-0,8m-DV 278401B004023 4011666924704 Valve VTL-G1/4a x G1/4i-6bar 397401B012087 4011666200969 Material pressure plate MDP-V2A 275408B030012 4011666200983 Nozzle set DSZ 1,3 FP-HTE 275403B030013 4011666200679 Nozzle set DSZ 1,5 FP-HTE 275403B030014 4011666200686 Nozzle set DSZ 1,8 FP-HTE 275403B030015 4011666200990 Nozzle set DSZ 2,0 FP-HTE 275403B030016 4011666201003 Nozzle set DSZ 2,5 FP-HTE 275403B030017 4011666201010 Nozzle set DSZ 3,0 FP-HTE 275403B030018 4011666200693 Flowing cup FB 0,6 l-FP-HTE 275403B030026 4011666200242 Nozzle ED 5,0 SAV 276401B030028 4011666201058 Nozzle ED-DSG 276402B030029 4011666200112 Nozzle ED-Set-Strahlfix 276401B030030 4011666200259 Nozzle ED-Strahlfix 276401B030031 4011666200327 Blasting abrasive STM-HOS 7,0 576401B030079 4011666201133 Viscosity measuring cup B-Ford 4 375403B030144 4011666246486 Nozzle set DSZ 1,3 FP-HTE-S 275403B030145 4011666246493 Nozzle set DSZ 1,5 FP-HTE-S 275403B030146 4011666246509 Nozzle set DSZ 1,8 FP-HTE-S 275403B030147 4011666246516 Nozzle set DSZ 2,0 FP-HTE-S 275403B030148 4011666246523 Nozzle set DSZ 2,5 FP-HTE-S 275403B030149 4011666246530 Nozzle set DSZ 3,0 FP-HTE-S 275403B030153 4011666200891 Preliminary filter VF-ATM / 10 375403B030157 4011666204998 Filter F-ATM 375403B030175 4011666201416 Nozzle ED 4,5-2 SPR 275408B030176 4011666201423 Nozzle ED 6,5-2 SPR 275408B030177 4011666201430 Nozzle ED 8,5-2 SPR 275408B030178 4011666201447 Nozzle ED 10,5-2 SPR 275408B030179 4011666201454 Nozzle ED 2,0 SPR 275408B030186 4011666201492 Nozzle ED 6,5-1 SPR 275408B030187 4011666201508 Nozzle ED 8,5-1 SPR 275408B030188 4011666201515 Nozzle ED 10,5-1 SPR 275408B030189 4011666201522 Nozzle ED 4,5-1 SPR 275408B030203 4011666203656 Fixing set BEFG 4x35,0-S6/100 258301B030204 4011666246295 Hanger bolt SS-M 8 x 80 258301B030205 4011666201553 Fixing set BEFG 5x45,0-S6/50 258301B030267 4011666203731 Flowing cup FB 0,5 l-Optimal 2001 275403B030310 4011666245816 Nozzle set DSZ 1,3 Optimal 2001 275403
Product informationArt. no. EAN code Type Product group
250Ap
pe
nd
ix
B030311 4011666245823 Nozzle set DSZ 1,5 Optimal 2001 275403B030312 4011666245830 Nozzle set DSZ 1,7 Optimal 2001 275403B030313 4011666245847 Nozzle set DSZ 1,9 Optimal 2001 275403B030314 4011666245854 Nozzle set DSZ 2,2 Optimal 2001 275403B030315 4011666245861 Nozzle set DSZ 2,5 Optimal 2001 275403B030340 4011666246097 Nozzle set DSZ 2,0 FP 2001 M-MA 275404B030341 4011666246103 Nozzle set DSZ 2,5 FP 2001 M-MA 275404B030342 4011666246837 Nozzle set DSZ 3,0 FP 2001 M-MA 275404B030350 4011666246851 Nozzle ED 4,5 HW-TSP 275405B030351 4011666246868 Nozzle ED 6,0 HW-TSP 275405B030352 4011666246875 Nozzle ED 8,0 HW-TSP 275405B030353 4011666246882 Nozzle ED 15,0 HW-TSP 275405B030354 4011666246899 Nozzle ED 17,5 HW-TSP 275405B030355 4011666246905 Flowing cup FB 5,0 l-HW-TSP 275405B030361 4011666247452 Nozzle set DSZ 0,5 AZ 2 275403B030362 4011666247469 Nozzle set DSZ 0,8 AZ 2 275403B030363 4011666247476 Nozzle set DSZ 1,0 AZ 2 275403B030364 4011666247483 Nozzle set DSZ 1,2 AZ 2 275403B030365 4011666247490 Flowing cup FB 0,25 l-AZ 2 275403B030390 4011666906458 Nozzle set DSZ 0,5 Mini-Vario 2 275403B030392 4011666906472 Nozzle set DSZ 1,0 Mini-Vario 2 275403B030393 4011666906489 Nozzle set DSZ 1,2 Mini-Vario 2 275403B030399 4011666246615 Nozzle ED-SAW 4 276401B030400 4011666246943 Nozzle set DSZ 1,3 W 400/200 275403B030401 4011666246950 Nozzle set DSZ 1,4 W 400/200 275403B030402 4011666246967 Nozzle set DSZ 1,6 W 400/200 275403B030403 4011666246974 Nozzle set DSZ 1,8 W 400/200 275403B030405 4011666246998 Air cap LK 18 W 400 275403B030406 4011666247001 Air cap LK 16 W 400 275403B030408 4011666247025 Filter F-Set-W 400 275403B030409 4011666247032 Flowing cup FB 0,6 l-W 400 275403B030411 4011666247360 Support adapter AD-W 400 275403B030412 4011666247353 Support adapter AD-FP-HTE 275403B030413 4011666247346 Changing cup system WB-Set 5 275403B030414 4011666247599 Replaceable cup set WB-Set 50 275403B030415 4011666901088 Filter F-WB 125 μm /5 275403B030416 4011666903167 Filter F-WB 250 μm /5 275403B030420 4011666901019 Nozzle set DSZ 1,0 FP-HTE-MA 275403B030421 4011666901026 Nozzle set DSZ 1,3 FP-HTE-MA 275403B030422 4011666901033 Nozzle set DSZ 1,5 FP-HTE-MA 275403B030423 4011666901040 Nozzle set DSZ 1,8 FP-HTE-MA 275403B030424 4011666901057 Nozzle set DSZ 2,0 FP-HTE-MA 275403B030425 4011666901064 Nozzle set DSZ 2,5 FP-HTE-MA 275403B040007 4011666201782 Suction cup SB 1,0 l-SM 275406B040160 4011666244963 Nozzle ED-Set-RM 378401B060000 4011666906793 Module MAS-Panel 253101B060001 4011666906809 Module MAS-Store 253101B072001 4011666246738 Filter screen FS-SMF G3/8 351108B072002 4011666246745 Filter screen FS-SMF G1/2 351108B110059 4011666201874 Rubber damper GSE 40 L 1/4 351109B110060 4011666201881 Rubber damper GSE 70 L 1/4 351109B110061 4011666201898 Rubber damper GSE 100 L 1/4 351109B110062 4011666201904 Rubber damper GSE 75 L2 /4 351109B110063 4011666201911 Rubber damper GSE 100 S1 /3 351109B110064 4011666245120 Rubber damper GSE 40 L2 /4 351109B110066 4011666245137 Rubber damper GSE 100 L2 /4 351109B110067 4011666245144 Rubber damper GSE 100 S2 /3 351109B110081 4011666203793 Fittings set AMS-B-V 2000-16 251102B110083 4011666203809 Fittings set AMS-B-V 2000-11 251102B110089 4011666201973 Fittings set AMS-B-V 500-11 251102B110091 4011666201997 Fittings set AMS-B-V 500-16 251102B110092 4011666202000 Fittings set AMS-B-H 750-11 251102B110093 4011666202017 Fittings set AMS-B-V 750-11 251102B110094 4011666202024 Fittings set AMS-B-H 750-16 251102B110095 4011666202031 Fittings set AMS-B-V 750-16 251102B110096 4011666245151 Fittings set AMS-B-H 1000-11 251102B110097 4011666202048 Fittings set AMS-B-V 1000-11 251102B110099 4011666202055 Fittings set AMS-B-V 1000-16 251102B110100 4011666203830 Fittings set AMS-B-V 3000-11 251102B110102 4011666201966 Fittings set AMS-B-H 500-11 251102B110103 4011666201980 Fittings set AMS-B-H 500-16 251102B110172 4011666247063 Bypass line UGL 3/4 254201B110175 4011666247087 Bypass line UGL 1 1/2 254201B110178 4011666900999 Bypass line UGL 2 254201B111002 4011666202086 Oil OEMIN-Kolben-stat 3,0 551101B111006 4011666202093 Oil OESYN-Kolben-stat 3,0 551101
Product informationArt. no. EAN code Type Product group
251 Ap
pe
nd
ix
B111010 4011666202116 Oil OEMIN-Schraub-stat 5,0 552101B111012 4011666247520 Oil OETSYN-Schraub-stat 5,0 552101B111013 4011666247537 Oil OETSYN-Schraub-stat 1,0 552101B111014 4011666901712 Oil OEMIN-Kolben-fahr 1,0 550101B111015 4011666203878 Anti-friction agent GMI 65 258301B111055 4011666202147 Startup-load relief AE 4 351104B111066 4011666246561 Connecting hose VSL 1/2-1800 351107B111067 4011666246585 Connecting hose VSL 3/4-1800 351107B111068 4011666246547 Connecting hose VSL 1-1800 351107B111069 4011666246554 Connecting hose VSL 1-800 351107B111070 4011666246578 Connecting hose VSL 1/2-800 351107B111071 4011666246592 Connecting hose VSL 3/4-800 351107B111072 4011666202154 Connecting hose VSL 1-1300 351107B111073 4011666202161 Operating hours counter BSZ 351106B111074 4011666202178 Connecting hose VSL 1 1/4-1300 351107B111075 4011666202185 Connecting hose VSL 1/2-1300 351107B111076 4011666202192 Connecting hose VSL 3/4-1300 351107B111078 4011666245168 Connecting hose VSL 1 1/2-1300 351107B111081 4011666246110 Energy-saving cut-out system ESAR 3/4 M 358301B111082 4011666246127 Energy-saving cut-out system ESAR 3/4 A 358301B111083 4011666246134 Energy-saving cut-out system ESAR 1 M 358301B111084 4011666246141 Energy-saving cut-out system ESAR 1 A 358301B111085 4011666246158 Energy-saving cut-out system ESAR 1 1/4 M 358301B111086 4011666246165 Energy-saving cut-out system ESAR 1 1/4 A 358301B111087 4011666246172 Energy-saving cut-out system ESAR 1 1/2 M 358301B111088 4011666246189 Energy-saving cut-out system ESAR 1 1/2 A 358301B111089 4011666246196 Energy-saving cut-out system ESAR 2 M 358301B111090 4011666246202 Energy-saving cut-out system ESAR 2 A 358301B111150 4011666203939 Star-delta switch SDS 5,5 351104B111151 4011666203946 Star-delta switch SDS 11 351104B111152 4011666245175 Star-delta switch SDS 7,5 351104B111200 4011666247315 Basic load alternation control GLW 4 351105B111201 4011666247322 Basic load alternation control GLW-SGSD 17 351105B200701 4011666202215 Angular bracket WKB-WE 1/4 898501B201013 4011666203366 Activated carbon refill pack AKP 10/40 Öwatec 555201B201014 4011666203373 Activated carbon refill pack AKP 130 Öwatec 555201B201019 4011666245472 Activated carbon refill pack AKP 175 Öwatec 555201B201023 4011666914224 Filter element FE-Öwamat 10 555201B201024 4011666914231 Filter element FE-Öwamat 11 555201B201025 4011666914248 Filter element FE-Öwamat 12 555201B201026 4011666914255 Filter element FE-Öwamat 14 555201B270019 4011666202253 Spare hood EH 2 351114B270020 4011666202260 Spare hood EH 4 351114B270021 4011666202277 Spare hood EH 5 351114B270022 4011666202284 Spare hood EH 5 S 351114B270031 4011666203991 Spare hood EH 3 351114B270032 4011666204004 Spare hood EH 3 S 351114B271032 4011666247261 Spare hood EH 3SZ 351114B312511 4011666907172 Module MAS-Schlauchaufroller 253101B322230 4011666245182 Keyless chuck SSBF 3/8“ - 10 mm 273401B322231 4011666246608 Keyless chuck SSBF 3/8“ - 13 mm 273401B322249 4011666203526 Tension spring SSF-SM/Kfz 265401B322253 4011666200068 Flat chisel ML10-F 250x20 565401B322255 4011666200099 Pointed chisel ML10-S 200x12 565401B322256 4011666200075 Flat chisel ML10-F 180x20 565401B322258 4011666200037 Boasting chisel, straight ML10-BG 180x50 565401B322259 4011666200051 Grooving chisel ML10-N 210x23 565401B322260 4011666200082 Boasting chisel, bent ML10-BK 180x50 565401B322279 4011666246622 Spare needles AT 12 471401B322281 4011666246646 Spare needles AT 28 471401B322284 4011666246721 Knife MR-Set-HW-SPA 568401B322285 4011666204011 Spare knife MR-EG 63 PE 258301B322291 4011666204066 Knife MR-RS 32 Alu 258301B322293 4011666246776 Spare knife MR-RS 63 PE 258301B322295 4011666246714 Spare knife MR-RS 63 Alu 258301B322300 4011666406927 Blasting abrasive STM-25,0 576401B322303 4011666933447 Socket spanner SKSL-Set 1/2“-3 364402B322363 4011666200297 Sheet metal cutting chisel ML10-BS 135x18 565401B322370 4011666200372 Flat chisel ML10-F 250x12 HSS 565401B322372 4011666202369 Pointed chisel ML10-S 180x12 HSS 565401B322374 4011666200419 Pointed chisel ML10-S 250x12 HSS 565401B322500 4011666200143 Grinding drum SLW-Set 9/12/18/25 566401B322502 4011666200174 Abrasive belt SFB 330x10 K80/5 566403B322503 4011666200181 Abrasive belt SFB 330x10 K120/5 566403B322504 4011666200198 Abrasive belt SFB 330x10 K180/5 566403B322520 4011666200211 Saw blade SGB-Bimet 0,3-0,8/5 567401
Product informationArt. no. EAN code Type Product group
252Ap
pe
nd
ix
B322521 4011666200228 Saw blade SGB-Bimet 0,8-1,2/5 567401B322525 4011666200020 Grinding points SFI-Standard 566401B322531 4011666245212 Abrasive sleeve SFH 9/10 566401B322532 4011666245229 Abrasive sleeve SFH 12/10 566401B322533 4011666245236 Abrasive sleeve SFH 18/10 566401B322534 4011666245243 Abrasive sleeve SFH 25/10 566401B322610 4011666247414 Wall bracket for impact screwdriver 1/2“ WH-SGS 364401B322670 4011666246301 Disassembly pliers STS-DZ 15 258302B322671 4011666246318 Disassembly pliers STS-DZ 18 258302B322672 4011666246325 Disassembly pliers STS-DZ 22 258302B322673 4011666246332 Disassembly pliers STS-DZ 28 258302B322674 4011666246349 Disassembly clip STS-DMC 15 258302B322675 4011666246356 Disassembly clip STS-DMC 18 258302B322676 4011666246363 Disassembly clip STS-DMC 22 258302B322677 4011666246370 Disassembly clip STS-DMC 28 258302B322678 4011666246387 Deburring tool STS-EG 12-28 258302B322687 4011666245977 Spare revolving blade MR-RS 28 PA / 2 258301B323001 4011666200457 Flat chisel ML12-F 190x20 HSS 565401B323002 4011666200464 Flat chisel ML12-F 270x20 HSS 565401B323004 4011666200471 Pointed chisel ML12-S 190x20 HSS 565401B323005 4011666200488 Pointed chisel ML12-S 270x20 HSS 565401B323010 4011666200525 Boasting chisel, straight ML12-BG 255x50 HSS 565401B323011 4011666200532 Boasting chisel, straight ML12-BG 265x95 HSS 565401B323012 4011666247377 Boasting chisel, bent ML10-BK215x100 565401B323018 4011666200570 Retaining cap HK-K-SMH 19 265401B323019 4011666246219 Retaining cap HK-K-SMH 55 898501B323029 4011666246226 Retaining cap HK-K-MHM/Kfz 265401B323414 4011666900708 Systainer SYS-Mini 1 163401B323417 4011666900166 Systainer SYS-Mini 2 163401B323481 4011666908216 Cover cushion EIL-DP SYS 1-5 363401B323483 4011666908230 Bottom cushion EIL-BP SYS 1-5 - 50mm 363401B400701 4011666202925 Angular bracket WKB-WE3/8-1/2 357212B400703 4011666204264 Angular bracket WKB-WE3/4-1 357212B400707 4011666204981 Disassembly spanner DSL-WE 357212B605061 4011666245281 Condensate collection pipe KSL 4 156221B605062 4011666245458 Condensate collection pipe KSL 2 156221B605063 4011666245465 Condensate collection pipe KSL 3 156221B605080 4011666204318 Mounting kit ABZ-Eco 4500 B 256201B605082 4011666246066 Mounting kit ABZ-Eco 3000 B 256201B605084 4011666246264 Mounting kit ABZ-Eco 3000 F 256201B605085 4011666246783 Mounting kit ABZ-Eco 3000 AM 256201B605086 4011666246790 Mounting kit ABZ-Eco 3000 BST 256201B612000 4011666933171 Mounting kit ABZ-DK ECO 1 254201B640360 4011666247230 Filter F-FF 1/2 557211B640399 4011666204394 Angular bracket WKB-F-G3/8 357201B640400 4011666203175 Angular bracket WKB-F-G1/2 357201B640401 4011666203182 Angular bracket WKB-F-G3/4 357201B640402 4011666203199 Angular bracket WKB-F-G1 357201B640404 4011666203212 Angular bracket WKB-F-G1 1/2 357201B640503 4011666245502 Pressure gauge MM-DDM-F 257201B640700 4011666245519 Filter F-VP 6 557201B640701 4011666245526 Filter F-VP 10 557201B640702 4011666245533 Filter F-VP 15 557201B640703 4011666245540 Filter F-VP 30 557201B640704 4011666245557 Filter F-VP 45 557201B640706 4011666245571 Filter F-VP 80 557201B640710 4011666245595 Filter F-FP 6 557202B640711 4011666245601 Filter F-FP 10 557202B640712 4011666245618 Filter F-FP 15 557202B640713 4011666245625 Filter F-FP 30 557202B640714 4011666245632 Filter F-FP 45 557202B640716 4011666245656 Filter F-FP 80 557202B640720 4011666245670 Filter F-AP 6 557203B640721 4011666245687 Filter F-AP 10 557203B640722 4011666245694 Filter F-AP 15 557203B640723 4011666245700 Filter F-AP 30 557203B640724 4011666245717 Filter F-AP 45 557203B640726 4011666245731 Filter F-AP 80 557203B640760 4011666247421 Filter F-AF 1/2 557211B770000 4011666200341 Oil OEMIN-DLW 1,0 597401B770010 4011666203236 Oil OESYN-Silent 1,0 551101B800100 4011666000446 Sound absorbing cover SDH UNM ST 4,0 251104B800536 4011666247278 Pronged combination spanner MKS-KMS 32 258301B800537 4011666247285 Pronged combination spanner MKS-KMS 40 258301B800538 4011666247292 Pronged combination spanner MKS-KMS 50 258301B800539 4011666247308 Pronged combination spanner MKS-KMS 63 258301
Product informationArt. no. EAN code Type Product group
253 Ap
pe
nd
ix
B800541 4011666912145 C-spanner HSL 32 K 258301B800542 4011666204424 C-spanner HSL 40 K 258301B800543 4011666244307 C-spanner HSL 50-63 K 258301B800550 4011666204448 Deburring tool EG 63 PE 258301B800551 4011666246806 Deburring tool EG 54 Alu 258301B800552 4011666911797 Deburring tool EG 35 PA-Alu-V4A 258301B800600 4011666246455 Sticker AK-Druckluft klein RL-Sy 258301B800602 4011666246462 Sticker AK-Kondensat 258301C420003 4011666300294 Staple KL 80/06 CNK/3000 574401C420004 4011666300300 Staple KL 80/08 CNK/3000 574401C420005 4011666300317 Staple KL 80/10 CNK/3000 574401C420006 4011666300324 Staple KL 80/12 CNK/3000 574401C420007 4011666300386 Staple KL 80/14 CNK/3000 574401C420008 4011666300331 Staple KL 80/16 CNK/3000 574401C420022 4011666300447 Staple KL 90/15 CNKH/2000 574401C420024 4011666300027 Staple KL 90/20 CNKH/2000 574401C420027 4011666300041 Staple KL 90/25 CNKH/2000 574401C420029 4011666300270 Staple KL 90/28 CNKH/5000 574401C420030 4011666300034 Staple KL 90/30 CNKH/2000 574401C420034 4011666300140 Staple KL 90/35 CNKH/2000 574401C420035 4011666300164 Staple KL 90/40 CNKH/2000 574401C421030 4011666301031 Staple KL 90/30 CV2AH/5000 574401C430003 4011666300058 Staple KL 347/10 CNK/2500 574401C430006 4011666300072 Staple KL 347/16 CNK/2500 574401C430008 4011666300065 Staple KL 347/20 CNK/2500 574401C430010 4011666300010 Staple KL 347/25 CNKH/2500 574401C430021 4011666300713 Staple KL 114/30 CNKH/20000 574401C430022 4011666300225 Staple KL 114/35 CNKH/10000 574401C430023 4011666300232 Staple KL 114/40 CNKH/10000 574401C430024 4011666300249 Staple KL 114/45 CNKH/10000 574401C430025 4011666300256 Staple KL 114/50 CNKH/10000 574401C430026 4011666300904 Staple KL 114/65 CNKH/10000 574401C520002 4011666300737 Brad nail SN 116 NK/5000 574403C520003 4011666300348 Brad nail SN 120 NK/5000 574403C520004 4011666300355 Brad nail SN 125 NK/5000 574403C520005 4011666300362 Brad nail SN 130 NK/5000 574403C520006 4011666300744 Brad nail SN 135 NK/5000 574403C520008 4011666300379 Brad nail SN 140 NK/5000 574403C520010 4011666301017 Brad nail SN 150 NK/5000 574403C520011 4011666300881 Brad nail SN 113 NK/1000 574403C520012 4011666300898 Brad nail SN 116 NK/1000 574403C520014 4011666300850 Brad nail SN 125 NK/1000 574403C520015 4011666300867 Brad nail SN 130 NK/1000 574403C521005 4011666301048 Brad nail SN 130 V2A/5000 574403D004009 4011666400666 Tyre pressure gauge RF-RMG 178401D004011 4011666400901 Tyre pressure gauge RF-RMG-K 178401D004020 4011666920973 Tyre pressure gauge „calibrated“ RF 6 XG 178402D004021 4011666920980 Tyre pressure gauge RF 12 MG 178402D004023 4011666933102 Tyre pressure gauge RF 6 MG 1,5 178402D004024 4011666933119 Tyre pressure gauge RF 6 MG 2,5 178402D004025 4011666933096 Tyre pressure gauge RF 6 DVG 0,8 178402D004026 4011666933133 Tyre pressure gauge RF 12 MG 2,5 178402D004027 4011666933126 Tyre pressure gauge RF 12 DVG 0,8 178402D030025 4011666400130 Sand blasting gun SSP-SAV 176401D030030 4011666400710 Sand blasting gun SSP-Strahlfix 176401D030034 4011666501684 Sand blasting gun SSP-DSP 176401D030059 4011666405364 Paint spray gun FSP-Optimal 2001-1,5 175403D030063 4011666405869 Funnel spray gun TSP 175405D030194 4011666405647 Paint spray gun FSP-FP 2001 M-MA 175404D030202 4011666405739 Paint spray gun FSP-FP-HTE-S 175403D030203 4011666405722 Paint spray gun FSP-FP-HTE-MA 175403D030206 4011666406583 Paint spray gun FSP-AZ 2 175403D030262 4011666406729 Sand blasting gun SSP-SAW 4 SYS 176401D030290 4011666906441 Paint spray gun FSP-Mini-Vario 2 175403D030305 4011666911780 Paint spray gun FSP-FP-HTE2 WB 175403D030310 4011666911759 Paint spray gun FSP-FP-HTE2-1,5 175403D030311 4011666911766 Paint spray gun FSP-FP-HTE2-1,3 175403D030312 4011666911773 Paint spray gun FSP-FP-HTE2-1,8 175403D030400 4011666406101 Paint spray gun FSP-W 400-1,3 175403D030401 4011666406118 Paint spray gun FSP-W 400-1,8 175403D040006 4011666400215 Spray gun SPP-SE 175406D040008 4011666400123 Spray gun SPP-SM 175406D040011 4011666400239 Tyre pressure gauge RF-RM 178401D040025 4011666400284 Grease gun FP-M 170401D040026 4011666405487 Grease gun FP-A 170401D040052 4011666405296 Combination gun UHW 2000 175401
Product informationArt. no. EAN code Type Product group
254Ap
pe
nd
ix
D040055 4011666204653 Material pressure vessels MDB 10 175407D040056 4011666405715 Material pressure vessels MDB-FDB 2 175407D040061 4011666402431 Farbboy MDB 24 175407D040063 4011666402448 Spritzboy MDB 24 ZN 175407D040086 4011666402462 Spritzboy MDB 40 V4A 175407D040096 4011666405319 Pressure blasting device DSG 10 176402D040118 4011666405753 Cartridge gun KTP 310 DR 177401D040130 4011666403834 Pouch gun SIP 600 177401D040137 4011666404008 Cartridge gun KTP 310 177401D040138 4011666406019 Cartridge gun KTP 310 ALU 177401D040152 4011666405807 Oil extraction device OBG 169401D070012 4011666402530 Spring balancer FZS 1 160311D070013 4011666402547 Spring balancer FZS 2 160311D070014 4011666402554 Spring balancer FZS 3 160311D070015 4011666908346 Spring balancer FZ 0,4-1 160312D070016 4011666908353 Spring balancer FZ 1-2 160312D070017 4011666908360 Spring balancer FZ 2-3 160312D070018 4011666908377 Spring balancer FZ 2-4 160312D070019 4011666908384 Spring balancer FZ 4-6 160312D070020 4011666908391 Spring balancer FZ 6-8 160312D100028 4011666406330 Power and air supply unit EA 4 160321D100029 4011666406347 Power and air supply unit EA 4/ DM 160321D100030 4011666406354 Power and air supply unit EA 3/1 160321D100031 4011666406361 Power and air supply unit EA 3/1 WE 160321D200091 4011666914446 Stapler KLG 80-16 174401D200094 4011666914460 Stapler KLG 114-65 174401D200098 4011666914453 Stapler KLG 90-40 SYS 174401D200100 4011666402608 Tubing cutter ROS 14 PA 258301D200106 4011666405876 Pipe shears RS 63 PE 258301D200108 4011666204707 Tubing cutter ROS 32 Alu 258301D200109 4011666405890 Pipe shears RS 63 Alu 258301D200602 4011666405227 Pipe shears RS 28 PA 258301D200603 4011666405883 Deburring tool EG-Alu 258301D202002 4011666400604 Pressure reducer DM 1/4 W 157212D202105 4011666404299 Pressure controller DM-FSP 1/4i 375403D221002 4011666400611 Water separator with filter FWA 1/4 W 157212D223001 4011666400659 Mist oiler N 1/4 W 157212D224026 4011666400734 3-way filter unit WE 3-fach 1/4 W 157212D225026 4011666400369 Filter pressure reducer FDM 1/4 W 157212D226026 4011666400727 2-way filter unit WE 2-fach 1/4 W 157212D300044 4011666406750 Combination nailer KNG 40 SYS 174402D300067 4011666914477 Upsetting nail driver SNG-SK 50 SYS 174403D300068 4011666914484 Pin nailer PNG-PN 25 SYS 174405D302002 4011666400550 Pressure reducer DM 3/8 W 157212D312503 4011666905932 Hose rewinder SLA 10 A 160302D312511 4011666901095 Hose rewinder SLA 8 A 160302D312514 4011666404701 Hose rewinder SLA 9 A 160302D312530 4011666404114 Hose rewinder SLA 9 160301D312537 4011666406378 Hose rewinder SLA 1212 A 160302D312540 4011666405661 Hose rewinder SLA 10 160301D321002 4011666400536 Water separator with filter FWA 3/8 W 157212D322254 4011666400307 Chisel hammer MLH-MHM 165401D322268 4011666400383 Socket spanner SKSL-Set 1/2“-10 364401D322275 4011666204776 Socket spanner SKSL-Set 3/8“-8 364401D322278 4011666402745 Socket spanner SKSL-Set 1“-7 364401D322292 4011666405913 Socket spanner SKSL-Set 1/2“-2 long 364401D322294 4011666406415 Socket spanner SKSL-Set 1/2“-3 Alu 364401D322295 4011666406774 Angle grinder WSL 125 SYS 166402D322297 4011666901132 Chisel hammer MLH-Kfz 165401D322298 4011666900487 Set of sockets SKSL-Set 3/4“-8 364401D322301 4011666400222 Axial grinder SBS-Set-Standard 166401D322311 4011666406804 Riveting tongs set NZ-SYS 172401D322314 4011666406798 Abrasive belt BDS 330 SYS 166403D322320 4011666406811 Body saw KS 9A-SYS 167401D322321 4011666903549 Body saw KS 9A 167401D322414 4011666406828 Needle descaler NP-AT 28 SYS 171401D322415 4011666406910 Needle descaler NP-AT 12 SYS 171401D322500 4011666933157 Systainer SYS 1 TL 163401D322501 4011666933140 Systainer SYS 2 TL 163401D322590 4011666402790 Ratchet screwdriver 1/4“ RAS 760-1/4‘‘ 164402D322602 4011666404329 Ratchet screwdriver 1/2“ RAS 176-1/2‘‘ 164402D322603 4011666404732 Ratchet screwdriver 1/2“ RAS 134-1/2‘‘ 164402D322623 4011666406224 Impact screwdriver 1“ SGS 315-1“ 164401D322642 4011666400017 Drill BM 525-3/8‘‘ 173401D322643 4011666401229 Drill BM-W 510 173401D322647 4011666405562 Drill BM 753 173401
Product informationArt. no. EAN code Type Product group
255 Ap
pe
nd
ix
D322653 4011666405586 Axial grinder SBS-W 522 166401D322659 4011666406835 Axial grinder SBS 700 SYS 166401D322661 4011666406842 Axial grinder SBS 1031 SYS 166401D322669 4011666406859 Special cutter SPA-SYS 168401D322672 4011666404374 Rotary screwdrivers DRS 800 164403D322673 4011666404381 Rotary screwdrivers DRS 810 164403D322676 4011666406637 Rotary screwdrivers DRS 1800 164403D322677 4011666406675 Rotary screwdrivers DRS 1000 164403D322678 4011666406866 Rotary screwdrivers DRS 140 SYS 164403D322800 4011666912688 Impact screwdriver SGS 340-3/8“ 164401D322811 4011666912701 Impact screwdriver SGS 405-1/2“ 164401D322812 4011666912718 Impact screwdriver SGS 600-1/2“ 164401D322813 4011666912725 Impact screwdriver SGS 815-1/2“ 164401D322814 4011666912732 Impact screwdriver SGS 1000-1/2“ 164401D322830 4011666912749 Impact screwdriver SGS 1625-3/4“ 164401D322840 4011666912756 Impact screwdriver SGS 1900-1“ 164401D323001 4011666400512 Mist oiler N 3/8 W 157212D323003 4011666406873 Chisel hammer MLH-SMH 19 SYS 165401D323004 4011666406880 Chisel hammer MLH-MMH 10 SYS 165401D324026 4011666400475 3-way filter unit WE 3-fach 3/8 W 157212D325026 4011666400499 Filter pressure reducer FDM 3/8 W 157212D326026 4011666400451 2-way filter unit WE 2-fach 3/8 W 157212D327347 4011666400079 Impact screwdriver 1/2“ SGS 345-1/2“ 164401D327400 4011666403865 Impact screwdriver 1/2“ SGS 141-1/2“ 164401D402002 4011666400543 Pressure reducer DM 1/2 W 157212D421002 4011666400529 Water separator with filter FWA 1/2 W 157212D423001 4011666400505 Mist oiler N 1/2 W 157212D424026 4011666400468 3-way filter unit WE 3-fach 1/2 W 157212D424030 4011666406606 Maintenance unit FDM/FF/AF 1/2 157221D425026 4011666400482 Filter pressure reducer FDM 1/2 W 157212D426026 4011666400444 2-way filter unit WE 2-fach 1/2 W 157212D426030 4011666406590 Maintenance unit FDM/FF 1/2 157221D458305 4011666401441 Filter pressure reducer FDM 3/4 W 157212D458405 4011666404527 2-way filter unit WE 2-fach 3/4 W 157212D468305 4011666404473 Filter pressure reducer FDM 1 W 157212D468405 4011666404893 2-way filter unit WE 2-fach 1 W 157212D502002 4011666402981 Pressure reducer DM 3/4 W 157212D521002 4011666402998 Water separator with filter FWA 3/4 W 157212D523001 4011666403001 Mist oiler N 3/4 W 157212D524026 4011666404077 3-way filter unit WE 3-fach 3/4 W 157212D602002 4011666403025 Pressure reducer DM 1 W 157212D605023 4011666903594 Ecomat KAL-Ecomat 3100 156201D605025 4011666403797 Ecomat KAL-Ecomat 4500 156201D605030 4011666403803 Ecomat KAL-Ecomat 20000 156201D621002 4011666403032 Water separator with filter FWA 1 W 157212D623001 4011666403049 Mist oiler N 1 W 157212D624026 4011666204837 3-way filter unit WE 3-fach 1 W 157212D640055 4011666405609 Cyclone separator ZA 5500 156211D640072 4011666204844 Air lubricator LOE-P 3/8 397401D640700 4011666404985 Preliminary filter VF-DVP 6 157201D640701 4011666404992 Preliminary filter VF-DVP 10 157201D640702 4011666405005 Preliminary filter VF-DVP 15 157201D640703 4011666405012 Preliminary filter VF-DVP 30 157201D640704 4011666405029 Preliminary filter VF-DVP 45 157201D640706 4011666405043 Preliminary filter VF-DVP 80 157201D640710 4011666405067 Micro filter FF-DFP 6 157202D640711 4011666405074 Micro filter FF-DFP 10 157202D640712 4011666405081 Micro filter FF-DFP 15 157202D640713 4011666405098 Micro filter FF-DFP 30 157202D640714 4011666405104 Micro filter FF-DFP 45 157202D640716 4011666405128 Micro filter FF-DFP 80 157202D640720 4011666405142 Activated carbon filters AF-DAP 6 157203D640721 4011666405159 Activated carbon filters AF-DAP 10 157203D640722 4011666405166 Activated carbon filters AF-DAP 15 157203D640723 4011666405173 Activated carbon filters AF-DAP 30 157203D640724 4011666405180 Activated carbon filters AF-DAP 45 157203D640726 4011666405203 Activated carbon filters AF-DAP 80 157203D640760 4011666406613 Activated carbon filters AF 1/2 157221D730030 4011666402226 Air hose DLS-SK-SF 11-6,3/5m 159303D730031 4011666402257 Air hose DLS-SK-SF 15,5-10/10m 159303D730032 4011666402240 Air hose DLS-SK-SF 15,5-10/5m 159303D730033 4011666402233 Air hose DLS-SK-SF 11-6,3/10m 159303D732031 4011666932778 Air hose DLS-SK-ARO-SF15,5-10-10m 159303D735031 4011666406668 Air hose DLS-SSK-SF 15,5-10/10m 159303D740002 4011666204950 Combination material hose DLS-Set-M9-D10-5m 275407D740003 4011666400598 Air hose DLS-SK 11-6/5m 159301
Product informationArt. no. EAN code Type Product group
256Ap
pe
nd
ix
D740004 4011666400208 Air hose DLS-SK 11-6/10m 159301D740006 4011666403247 Material pressure hose SL 15x9/10m 275407D740008 4011666403261 Combination material hose SL-Set-M13-D10-10m 275407D740009 4011666403278 Material hose SL-Set-M12,7-D6/5m 276402D740010 4011666403285 Material hose SL-Set-M12,7-D6/10m 276402D740012 4011666400857 Air hose DLS-SK 15-9/5m 159301D740013 4011666400192 Air hose DLS-SK 15-9/10m 159301D740015 4011666400406 Blowing gun AP-BM-SN 179401D740017 4011666400826 Blowing gun AP-BM-T9 179401D740020 4011666403995 Blowing gun AP-RS 179401D740021 4011666400390 Blowing gun AP-RSV 100 179401D740035 4011666403322 Blowing gun AP-Soft 179401D740040 4011666400864 Air hose DLS-SK-OA 15-9/10m 159302D740052 4011666403353 Material hose SL-Set-M19-D9-8m 275408D740115 4011666403766 Blowing gun AP-BM-SNV100 179401D740140 4011666404800 Blowing gun AP-Vario-S 179401D740141 4011666404817 Blowing gun AP-Vario-L 179401D740142 4011666404824 Blowing gun AP-Vario-F 179401D740143 4011666404831 Blowing gun AP-Vario-V 179401D740144 4011666404848 Blowing gun AP-Vario-P 179401D740145 4011666405685 Blowing gun AP-BM-S 179401D740148 4011666934000 Blowing gun AP-Vario-L-500 179401D750021 4011666204967 Air hose DLS-SK 18,5-12,5/10m 159301D770121 4011666401496 Spray protective hood STSH 376401D770128 4011666404091 Breathing mask ATM-A1 375403D770131 4011666400185 Spiral hose SSL-SK-PA 8-6/7,5m 159321D770132 4011666400758 Spiral hose SSL-SK-PA 10-8/10m 159321D770133 4011666401922 Spiral hose SSL-SK-PA 8-6/5m 159321D770136 4011666406149 Spiral hose SSL-SK-PUR 10-6,5/6m 159322D770137 4011666406156 Spiral hose SSL-SK-PUR 10-6,5/7,5m 159322D770138 4011666406163 Spiral hose SSL-SK-PUR 12-8/6m 159322D770139 4011666406170 Spiral hose SSL-SK-PUR 12-8/7,5m 159322D900512 4011666403407 Spraying lance SPL 750 175409D900514 4011666403414 Spray pipe SPR 330-6,5 175408D900521 4011666405623 Spray pipe SPR 215-6,5 175408D900525 4011666403445 Spray pipe extension SRV-V800 275408D900527 4011666403452 Spraying angle SPW 70° 275408D900529 4011666903556 Spray pipe SPR 215-8,5 175408D900621 4011666405968 Spray pipe SPR-Set 215 SYS 175408E014133 4011666905680 Plug connection SVG-R1-6xG1/8a 162311E014134 4011666905697 Plug connection SVG-R1-6xG1/4a 162311E014144 4011666905703 Plug connection SVG-R1-8xG1/8a 162311E014145 4011666905710 Plug connection SVG-R1-8xG1/4a 162311E014146 4011666905727 Plug connection SVG-R1-8xG3/8a 162311E014154 4011666905734 Plug connection SVG-R1-10xG1/4a 162311E014155 4011666905741 Plug connection SVG-R1-10xG3/8a 162311E014233 4011666905758 Plug connection SVG-R2-6xG1/8i 162311E014234 4011666905765 Plug connection SVG-R2-6xG1/4i 162311E014243 4011666905772 Plug connection SVG-R2-8xG1/8i 162311E014244 4011666905789 Plug connection SVG-R2-8xG1/4i 162311E014334 4011666905796 Plug connection SVG-R3-6x6 162311E014345 4011666905802 Plug connection SVG-R3-8x8 162311E014356 4011666905819 Plug connection SVG-R3-10x10 162311E014434 4011666905826 Plug connection SVG-R4-6x6 L 162311E014445 4011666905833 Plug connection SVG-R4-8x8 L 162311E014456 4011666905840 Plug connection SVG-R4-10x10 L 162311E014534 4011666905857 Plug connection SVG-R5-6x6x6 T 162311E014545 4011666905864 Plug connection SVG-R5-8x8x8 T 162311E014556 4011666905871 Plug connection SVG-R5-10x10x10 T 162311E015732 4011666905888 Plug connection SVG-R15-6xG1/8a L 162311E015743 4011666905895 Plug connection SVG-R15-8xG1/4a L 162311E015753 4011666905901 Plug connection SVG-R15-10xG1/4a L 162311E015834 4011666905918 Plug connection SVG-R23-6x6x6 Y 162311E015845 4011666905925 Plug connection SVG-R23-8x8x8 Y 162311E021131 4011666514110 Male stud coupling GESV-NI 6-4xG1/8a 162301E021132 4011666514127 Male stud coupling GESV-NI 6-4xG1/4a 162301E021133 4011666514134 Male stud coupling GESV-NI 6-4xG3/8a 162301E021141 4011666514141 Male stud coupling GESV-NI 8-6xG1/8a 162301E021142 4011666514158 Male stud coupling GESV-NI 8-6xG1/4a 162301E021143 4011666514165 Male stud coupling GESV-NI 8-6xG3/8a 162301E021144 4011666514172 Male stud coupling GESV-NI 8-6xG1/2a 162301E021152 4011666514189 Male stud coupling GESV-NI 10-8xG1/4a 162301E021153 4011666514196 Male stud coupling GESV-NI 10-8xG3/8a 162301E021154 4011666514202 Male stud coupling GESV-NI 10-8xG1/2a 162301E021331 4011666514325 Straight female stud coupling GAVS-NI 6-4xG1/8i 162301E021332 4011666514332 Straight female stud coupling GAVS-NI 6-4xG1/4i 162301
Product informationArt. no. EAN code Type Product group
257 Ap
pe
nd
ix
E021341 4011666514349 Straight female stud coupling GAVS-NI 8-6xG1/8i 162301E021342 4011666514356 Straight female stud coupling GAVS-NI 8-6xG1/4i 162301E021343 4011666514363 Straight female stud coupling GAVS-NI 8-6xG3/8i 162301E021352 4011666514370 Straight female stud coupling GAVS-NI 10-8xG1/4i 162301E021353 4011666514387 Straight female stud coupling GAVS-NI 10-8xG3/8i 162301E021354 4011666514394 Straight female stud coupling GAVS-NI 10-8xG1/2i 162301E021431 4011666514431 Angular male connector WEV-NI 6-4xR1/8a 162301E021432 4011666514448 Angular male connector WEV-NI 6-4xR1/4a 162301E021433 4011666514455 Angular male connector WEV-NI 8-6xR1/8a 162301E021442 4011666514462 Angular male connector WEV-NI 8-6xR1/4a 162301E021443 4011666514479 Angular male connector WEV-NI 8-6xR3/8a 162301E021452 4011666514486 Angular male connector WEV-NI 10-8xR1/4a 162301E021453 4011666514493 Angular male connector WEV-NI 10-8xR3/8a 162301E021831 4011666514721 T-union TVS-DR 6-4xG1/8ax6-4 162301E021832 4011666514738 T-union TVS-DR 6-4xG1/4ax6-4 162301E021841 4011666514745 T-union TVS-DR 8-6xG1/8ax8-6 162301E021842 4011666514752 T-union TVS-DR 8-6xG1/4ax8-6 162301E021852 4011666514769 T-union TVS-DR 10-8xG1/4ax10-8 162301E022133 4011666514899 Straight coupling GVS-NI 6-4x6-4 162301E022143 4011666514905 Straight coupling GVS-NI 8-6x6-4 162301E022144 4011666514912 Straight coupling GVS-NI 8-6x8-6 162301E022155 4011666514929 Straight coupling GVS-NI 10-8x10-8 162301E022233 4011666514967 Thr.pipe angle WV-NI 6-4x6-4 162301E022244 4011666514974 Thr.pipe angle WV-NI 8-6x8-6 162301E022255 4011666514981 Thr.pipe angle WV-NI 10-8x10-8 162301E022333 4011666515025 T-union TVS-NI 3x6-4 162301E022344 4011666515032 T-union TVS-NI 3x8-6 162301E022355 4011666515049 T-union TVS-NI 3x10-8 162301E023311 4011666515254 Crossjoint KZS-Alu 4 x G1/8i 161351E023322 4011666515261 Crossjoint KZS-Alu 4 x G1/4i 161351E023333 4011666515278 Crossjoint VRB-Alu 4 x G3/8i 161351E023344 4011666515285 Crossjoint KZS-Alu 4 x G1/2i 161351E023411 4011666515292 Rotary nipple DRN-G1/8a x G1/8i 161342E023422 4011666515308 Rotary nipple DRN-G1/4a x G1/4i 161342E023433 4011666515315 Rotary nipple DRN-G3/8a x G3/8i 161342E024611 4011666515322 Silencer SDP-SMK-G1/8a 351113E024612 4011666515339 Silencer SDP-SMK-G1/4a 351113E024613 4011666515346 Silencer SDP-SMK-G3/8a 351113E024614 4011666515353 Silencer SDP-SMK-G1/2a 351113E024615 4011666515360 Silencer SDP-SMK-G3/4a 351113E024616 4011666515377 Silencer SDP-SMK-G1a 351113E024620 4011666515384 Silencer SDP-SML-M5a 351113E024621 4011666515391 Silencer SDP-SML-G1/8a 351113E024622 4011666515407 Silencer SDP-SML-G1/4a 351113E024623 4011666515414 Silencer SDP-SML-G3/8a 351113E024624 4011666515421 Silencer SDP-SML-G1/2a 351113E024625 4011666515438 Silencer SDP-SML-G3/4a 351113E024626 4011666515445 Silencer SDP-SML-G1a 351113E030011 4011666515551 Double nipple DN-MS-R1/8a x R1/8a 161341E030022 4011666515568 Double nipple DN-MS-R1/4a x R1/4a 161341E030033 4011666515575 Double nipple DN-MS-R3/8a x R3/8a 161341E030044 4011666515582 Double nipple DN-MS-R1/2a x R1/2a 161341E030045 4011666928184 Double nipple DN-MS-R3/4a x R3/4a 161341E030048 4011666512802 Double nipple DNL-MS-R1/8a x R1/8a 161341E030049 4011666512819 Double nipple DNL-MS-R1/8a x R1/4a 161341E030050 4011666501714 Condensate drain valve KAV-G1/4a 351112E030051 4011666501899 Condensate drain valve KAV-G3/8a 351112E030052 4011666512826 Double nipple DNL-MS-R1/4a x R1/4a 161341E030053 4011666512833 Double nipple DNL-MS-R1/4a x R3/8a 161341E030054 4011666505354 Double nipple DNL-MS-R3/8a x R3/8a 161341E030055 4011666512413 Double nipple DNL-MS-R1/2a x R1/2a 357201E030056 4011666512840 Double nipple DNL-MS-R3/4a x R3/4a 161341E030057 4011666512857 Double nipple DNL-MS-R1a x R1a 161341E030058 4011666919854 Condensate drain valve KAV-G1/2a 351112E030111 4011666515599 Double nipple DN-MS-G1/8a x G1/8a 161341E030112 4011666515605 Double nipple DN-MS-G1/8a x G1/4a 161341E030113 4011666515612 Double nipple DN-MS-G1/8a x G3/8a 161341E030122 4011666515629 Double nipple DN-MS-G1/4a x G1/4a 161341E030123 4011666515636 Double nipple DN-MS-G1/4a x G3/8a 161341E030124 4011666515643 Double nipple DN-MS-G1/4a x G1/2a 161341E030133 4011666515650 Double nipple DN-MS-G3/8a x G3/8a 161341E030134 4011666515667 Double nipple DN-MS-G3/8a x G1/2a 161341E030135 4011666515674 Double nipple DN-MS-G3/8a x G3/4a 161341E030144 4011666515681 Double nipple DN-MS-G1/2a x G1/2a 161341E030145 4011666515698 Double nipple DN-MS-G1/2a x G3/4a 161341E030146 4011666515704 Double nipple DN-MS-G1/2a x G1a 161341
Product informationArt. no. EAN code Type Product group
258Ap
pe
nd
ix
E030155 4011666515711 Double nipple DN-MS-G3/4a x G3/4a 161341E030156 4011666515728 Double nipple DN-MS-G3/4a x G1a 161341E030166 4011666515735 Double nipple DN-MS-G1a x G1a 161341E030501 4011666515742 Locking screw VSS-MS-I-R1/8a 161344E030502 4011666515759 Locking screw VSS-MS-I-R1/4a 161344E030503 4011666515766 Locking screw VSS-MS-I-R3/8a 161344E030510 4011666515773 Locking screw VSS-MS-I-B-G1/8a 161344E030520 4011666509475 Locking screw VSS-MS-I-B-G1/4a 161344E030530 4011666509482 Locking screw VSS-MS-I-B-G3/8a 161344E030540 4011666509499 Locking screw VSS-MS-I-B-G1/2a 161344E030550 4011666512796 Locking screw VSS-MS-I-B-G3/4a 161344E030611 4011666515780 Bracket WKS-MS 90-2xR1/8a 161351E030622 4011666515797 Bracket WKS-MS 90-2xR1/4a 161351E030633 4011666515803 Bracket WKS-MS 90-2xR3/8a 161351E030644 4011666515810 Bracket WKS-MS 90-2xR1/2a 161351E030811 4011666515827 T-piece TSK-MS 90-3xR1/8a 161351E030822 4011666515834 T-piece TSK-MS 90-3xR1/4a 161351E030833 4011666515841 T-piece TSK-MS 90-3xR3/8a 161351E030844 4011666515858 T-piece TSK-MS 90-3xR1/2a 161351E031143 4011666515865 Quick-release coupling SK-NW7,2-8x6mm 161311E031145 4011666515872 Quick-release coupling SK-NW7,2-12x9mm 161311E031153 4011666515889 Quick-release coupling SK-NW7,2-8x6mm-KF 161311E031155 4011666515896 Quick-release coupling SK-NW7,2-12x9mm-KF 161311E031201 4011666512864 Plug nipple STNP-MS-NW7,2-G1/8a 161312E031231 4011666512871 Plug nipple STNP-MS-NW7,2-G1/8i 161312E031342 4011666515902 Plug-in socket STTL-K 4mm 161312E031343 4011666515919 Plug-in socket STTL-K 6mm 161312E031345 4011666515926 Plug-in socket STTL-K 9mm 161312E031353 4011666515933 Plug-in socket STTL-KF 6mm 161312E031355 4011666515940 Plug-in socket STTL-KF 9mm 161312E031360 4011666515957 Plug-in socket STTL 4mm 161312E032101 4011666515964 Quick-release coupling SK-NW5-G1/8a-mini 161331E032102 4011666515971 Quick-release coupling SK-NW5-G1/4a-mini 161331E032131 4011666515988 Quick-release coupling SK-NW5-G1/8i-mini 161331E032132 4011666515995 Quick-release coupling SK-NW5-G1/4i-mini 161331E032142 4011666516008 Quick-release coupling SK-NW5-6x4mm-mini 161331E032143 4011666516015 Quick-release coupling SK-NW5-8x6mm-mini 161331E032160 4011666516022 Quick-release coupling SK-NW5-4mm-mini 161331E032161 4011666516039 Quick-release coupling SK-NW5-6mm-mini 161331E032162 4011666516046 Quick-release coupling SK-NW5-9mm-mini 161331E032201 4011666516053 Plug nipple STNP-MS-NW5-G1/8a-mini 161331E032202 4011666516060 Plug nipple STNP-MS-NW5-G1/4a-mini 161331E032231 4011666516077 Plug nipple STNP-MS-NW5-G1/8i-mini 161331E032232 4011666516084 Plug nipple STNP-MS-NW5-G1/4i-mini 161331E032342 4011666516091 Plug-in socket STTL-6x4mm-mini 161331E032343 4011666516107 Plug-in socket STTL-8x6mm-mini 161331E032360 4011666516114 Plug-in socket STTL-4mm-mini 161331E032361 4011666516121 Plug-in socket STTL-6mm-mini 161331E032362 4011666516138 Plug-in socket STTL-9mm-mini 161331E032701 4011666913029 Quick-release coupling SK-NW5,5-ARO-G1/4a 161332E032702 4011666913036 Quick-release coupling SK-NW5,5-ARO-G3/8a 161332E032703 4011666913043 Quick-release coupling SK-NW5,5-ARO-G1/2a 161332E032704 4011666913050 Quick-release coupling SK-NW5,5-ARO-G1/4i 161332E032705 4011666913067 Quick-release coupling SK-NW5,5-ARO-G3/8i 161332E032706 4011666913074 Quick-release coupling SK-NW5,5-ARO-G1/2i 161332E032707 4011666913081 Quick-release coupling SK-NW5,5-ARO-6mm 161332E032708 4011666913098 Quick-release coupling SK-NW5,5-ARO-9mm 161332E032709 4011666913104 Quick-release coupling SK-NW5,5-ARO-13mm 161332E032721 4011666913111 Plug nipple STNP-NW5,5-ARO-G1/4a 161332E032722 4011666913128 Plug nipple STNP-NW5,5-ARO-G3/8a 161332E032723 4011666913135 Plug nipple STNP-NW5,5-ARO-G1/2a 161332E032724 4011666913142 Plug nipple STNP-NW5,5-ARO-G1/4i 161332E032725 4011666913159 Plug nipple STNP-NW5,5-ARO-G3/8i 161332E032726 4011666913166 Plug nipple STNP-NW5,5-ARO-G1/2i 161332E032727 4011666913173 Plug nipple STNP-NW5,5-ARO-6mm 161332E032728 4011666913180 Plug nipple STNP-NW5,5-ARO-9mm 161332E032729 4011666913197 Plug nipple STNP-NW5,5-ARO-13mm 161332E032811 4011666924506 Quick-release coupling SK-NW5,5-ISO-G1/4a 161333E032812 4011666924513 Quick-release coupling SK-NW5,5-ISO-G3/8a 161333E032813 4011666924520 Quick-release coupling SK-NW5,5-ISO-G1/2a 161333E032814 4011666924537 Quick-release coupling SK-NW5,5-ISO-G1/4i 161333E032815 4011666924544 Quick-release coupling SK-NW5,5-ISO-G3/8i 161333E032816 4011666924551 Quick-release coupling SK-NW5,5-ISO-G1/2i 161333E032817 4011666924568 Quick-release coupling SK-NW5,5-ISO-6mm 161333E032818 4011666924575 Quick-release coupling SK-NW5,5-ISO-9mm 161333E032819 4011666924582 Quick-release coupling SK-NW5,5-ISO-13mm 161333
Product informationArt. no. EAN code Type Product group
259 Ap
pe
nd
ix
E032821 4011666924414 Plug nipple STNP-NW5,5-ISO-R1/4a 161333E032822 4011666924421 Plug nipple STNP-NW5,5-ISO-R3/8a 161333E032823 4011666924438 Plug nipple STNP-NW5,5-ISO-R1/2a 161333E032824 4011666924445 Plug nipple STNP-NW5,5-ISO-G1/4i 161333E032825 4011666924452 Plug nipple STNP-NW5,5-ISO-G3/8i 161333E032826 4011666924469 Plug nipple STNP-NW5,5-ISO-G1/2i 161333E032827 4011666924476 Plug nipple STNP-NW5,5-ISO-6mm 161333E032828 4011666924483 Plug nipple STNP-NW5,5-ISO-9mm 161333E032829 4011666924490 Plug nipple STNP-NW5,5-ISO-13mm 161333E033241 4011666915054 Plug nipple STNP-FE-NW7,6-EURO-G1/4a 161302E033242 4011666915061 Plug nipple STNP-FE-NW7,6-EURO-G3/8a 161302E033243 4011666915078 Plug nipple STNP-FE-NW7,6-EURO-G1/2a 161302E033244 4011666915085 Plug nipple STNP-FE-NW7,6-EURO-G1/4i 161302E033245 4011666915092 Plug nipple STNP-FE-NW7,6-EURO-G3/8i 161302E033246 4011666915108 Plug nipple STNP-FE-NW7,6-EURO-G1/2i 161302E033247 4011666915115 Plug nipple STNP-FE-NW7,6-EURO-6mm 161302E033248 4011666915122 Plug nipple STNP-FE-NW7,6-EURO-9mm 161302E033249 4011666915139 Plug nipple STNP-FE-NW7,6-EURO-13mm 161302E033401 4011666916099 Quick-release coupling SK-FE-NW7,6-EURO-G1/4a 161303E033402 4011666916105 Quick-release coupling SK-FE-NW7,6-EURO-G3/8a 161303E033403 4011666916112 Quick-release coupling SK-FE-NW7,6-EURO-G1/2a 161303E033404 4011666916129 Quick-release coupling SK-FE-NW7,6-EURO-G1/4i 161303E033405 4011666916136 Quick-release coupling SK-FE-NW7,6-EURO-G3/8i 161303E033406 4011666916143 Quick-release coupling SK-FE-NW7,6-EURO-G1/2i 161303E033407 4011666916150 Quick-release coupling SK-FE-NW7,6-EURO-6mm 161303E033408 4011666916167 Quick-release coupling SK-FE-NW7,6-EURO-9mm 161303E033409 4011666916174 Quick-release coupling SK-FE-NW7,6-EURO-13mm 161303E035733 4011666509239 Distributors VT 3 4xG3/8i 161351E035734 4011666509246 Distributors VT 3 4xG1/2i 161351E035833 4011666509215 Distributors VT 2 3xG3/8i 161351E035834 4011666509222 Distributors VT 2 3xG1/2i 161351E036911 4011666915146 Safety coupling SSK-NW7,6-EURO-G1/4a 161301E036912 4011666915177 Safety coupling SSK-NW7,6-EURO-G3/8a 161301E036913 4011666915184 Safety coupling SSK-NW7,6-EURO-G1/2a 161301E036914 4011666915191 Safety coupling SSK-NW7,6-EURO-G1/4i 161301E036915 4011666915207 Safety coupling SSK-NW7,6-EURO-G3/8i 161301E036916 4011666915214 Safety coupling SSK-NW7,6-EURO-G1/2i 161301E036917 4011666915221 Safety coupling SSK-NW7,6-EURO-6mm 161301E036918 4011666915238 Safety coupling SSK-NW7,6-EURO-9mm 161301E036919 4011666915245 Safety coupling SSK-NW7,6-EURO-13mm 161301E038105 4011666509192 Spiral hose SSL-PUR 12-8/6m 159322E038106 4011666509208 Spiral hose SSL-PUR 12-8/7,5m 159322E038704 4011666509178 Spiral hose SSL-PUR 10-6,5/6m 159322E038705 4011666509185 Spiral hose SSL-PUR 10-6,5/7,5m 159322E039008 4011666516145 T-piece TSK-MS 90-3xG1/8i 161351E039010 4011666516152 T-piece TSK-MS 90-3xG1/4i 161351E039012 4011666516169 T-piece TSK-MS 90-3xG3/8i 161351E039014 4011666516176 T-piece TSK-MS 90-3xG1/2i 161351E039016 4011666516183 T-piece TSK-MS 90-3xG3/4i 161351E039018 4011666516190 T-piece TSK-MS 90-3xG1i 161351E039137 4011666516244 Bracket WKS-W90 2x G 1/4i MS 161351E039139 4011666516251 Bracket WKS-W90 2x G 3/8i MS 161351E039141 4011666516268 Bracket WKS-W90 2x G 1/2i MS 161351E039143 4011666516275 Bracket WKS-W90 2x G 3/4i MS 161351E039145 4011666516282 Bracket WKS-W90 2x G1i MS 161351E041111 4011666516329 Double nipple DN-NI-G1/8a x G1/8a 161341E041112 4011666516336 Double nipple DN-NI-G1/8a x G1/4a 161341E041113 4011666516343 Double nipple DN-NI-G1/8a x G3/8a 161341E041122 4011666516350 Double nipple DN-NI-G1/4a x G1/4a 161341E041123 4011666516367 Double nipple DN-NI-G1/4a x G3/8a 161341E041124 4011666516374 Double nipple DN-NI-G1/4a x G1/2a 161341E041133 4011666516381 Double nipple DN-NI-G3/8a x G3/8a 161341E041134 4011666516398 Double nipple DN-NI-G3/8a x G1/2a 161341E041144 4011666516404 Double nipple DN-NI-G1/2a x G1/2a 161341E041145 4011666516411 Double nipple DN-NI-G1/2a x G3/4a 161341E041155 4011666516428 Double nipple DN-NI-G3/4a x G3/4a 161341E041221 4011666516435 Reduction fitting RDS-R1/4a x G1/8i 161342E041232 4011666516442 Reduction fitting RDS-R3/8a x G1/4i 161342E041243 4011666516459 Reduction fitting RDS-R1/2a x G3/8i 161342E041254 4011666516466 Reduction fitting RDS-R3/4a x G1/2i 161342E041312 4011666516473 Reducing nipple RDN-G1/4a x G1/8i 161342E041323 4011666516480 Reducing nipple RDN-G1/4a x G3/8i 161342E041334 4011666516497 Reducing nipple RDN-G1/2a x G3/8i 161342E041411 4011666516503 Sleeve MU-NI-G1/8i 161343E041422 4011666516510 Sleeve MU-NI-G1/4i 161343E041433 4011666516527 Sleeve MU-NI-G3/8i 161343
Product informationArt. no. EAN code Type Product group
260Ap
pe
nd
ix
E041444 4011666516534 Sleeve MU-NI-G1/2i 161343E041510 4011666516541 Locking screw VSS-NI-AS-G1/8a 161344E041530 4011666516565 Locking screw VSS-NI-AS-G3/8a 161344E041540 4011666516572 Locking screw VSS-NI-AS-G1/2a 161344E041611 4011666516589 Bracket WKS-W90-R1/8axG1/8i 161351E041622 4011666516596 Bracket WKS-W90-R1/4axG1/4i 161351E041633 4011666516602 Bracket WKS-W90-G3/8axR3/8i 161351E041644 4011666512420 Bracket WKS-W90-R1/2axG1/2i 161351E041655 4011666924940 Angle WKS-W90-R3/4axG3/4i 161351E041711 4011666516619 Bracket WKS-W90-NI 2xG1/8i 161351E041722 4011666516626 Bracket WKS-W90-NI 2xG1/4i 161351E041733 4011666516633 Bracket WKS-W90-NI 2xG3/8i 161351E041744 4011666516640 Bracket WKS-W90-NI 2xG1/2i 161351E041811 4011666516657 T-piece TSK-NI 90-3xR1/8a 161351E041822 4011666516664 T-piece TSK-NI 90-3xR1/4a 161351E041833 4011666516671 T-piece TSK-NI 90-3xR3/8a 161351E041844 4011666516688 T-piece TSK-NI 90-3xR1/2a 161351E041911 4011666516695 T-piece TSK-MS 1xR1/8a-2xG1/8i 161351E041922 4011666516701 T-piece TSK-MS 1xR1/4a-2xG1/4i 161351E041933 4011666516718 T-piece TSK-MS 1xR3/8a-2xG3/8i 161351E041944 4011666516725 T-piece TSK-MS 1xR1/2a-2xG1/2i 161351E042111 4011666516732 T-piece TSK-NI 3xG1/8i 161351E042122 4011666516749 T-piece TSK-NI 3xG1/4i 161351E042133 4011666516756 T-piece TSK-NI 3xG3/8i 161351E042144 4011666516763 T-piece TSK-NI 3xG1/2i 161351E042222 4011666516787 Y-piece YS-NI 1xR1/4a-2xG1/4i 161351E042233 4011666516794 Y-piece YS-NI 1xR3/8a-2xG3/8i 161351E042244 4011666516800 Y-piece YS-NI 1xR1/2a-2xG1/2i 161351E042592 4011666516855 Y-piece YS-NI 3xG1/4i 161351E042593 4011666516862 Y-piece YS-NI 3xG3/8i 161351E042594 4011666516879 Y-piece YS-NI 3xG1/2i 161351E043133 4011666406446 Ball valve KH-G 3/8ixG 3/8i 351111E043233 4011666519641 Ball valve KH-G 3/8ixG 3/8a 351111E050082 4011666501981 Ball valve KH-NI-16 G1i 351111E050083 4011666501998 Ball valve KH-NI-16 G1 1/4i 351111E050084 4011666502001 Ball valve KH-NI-16 G1 1/2i 351111E050086 4011666502025 Ball valve KH-NI-40 G3/8i 351111E050087 4011666502032 Ball valve KH-NI-40 G1/2i 351111E050088 4011666502049 Ball valve KH-NI-40 G3/4i 351111E050089 4011666502056 Ball valve KH-NI-40 G1i 351111E050093 4011666510211 Ball valve KH-NI-40 G1 1/2i 351111E050094 4011666510228 Ball valve KH-NI-40 G2i 351111E050110 4011666520142 Ball valve KH-NI-16 G1/2a x G1/2i 351111E050111 4011666520159 Ball valve KH-NI-16 G3/4a x G3/4i 351111E071110 4011666516886 Silencer SDP-SPEP-M5a 351113E071111 4011666516893 Silencer SDP-SPEP-G1/8a 351113E071112 4011666516909 Silencer SDP-SPEP-G1/4a 351113E071113 4011666516916 Silencer SDP-SPEP-G3/8a 351113E071114 4011666516923 Silencer SDP-SPEP-G1/2a 351113E071115 4011666516930 Silencer SDP-SPEP-G3/4a 351113E072001 4011666516954 Dirt pan SMF 2xG3/8i 351108E072002 4011666516961 Dirt pan SMF 2xG1/2i 351108E072114 4011666516978 Silencer SDP-SPE-G1/2a 351113E072115 4011666516985 Silencer SDP-SPE-G3/4a 351113E072116 4011666516992 Silencer SDP-SPE-G1a 351113E094131 4011666509628 Air hose DLS-PE 6-4/50m 159312E094141 4011666509635 Air hose DLS-PE 8-6/50m 159312E094151 4011666509642 Air hose DLS-PE 10-8/50m 159312E095131 4011666509659 Air hose DLS-PUR 6-4/50m 159313E095141 4011666509666 Air hose DLS-PUR 8-6/50m 159313E095151 4011666509673 Air hose DLS-PUR 10-8/50m 159313E104002 4011666509956 Wall hose holder WH-WSH 359301E111131 4011666509581 Air hose DLS-PA 6-4/50m 159311E111141 4011666509598 Air hose DLS-PA 8-6/50m 159311E111151 4011666509611 Air hose DLS-PA 10-8/50m 159311E131012 4011666517005 Terminal screw SRK 8-12mm 359301E131040 4011666517012 Terminal screw SRK 25-40mm 359301E131050 4011666517029 Terminal screw SRK 32-50mm 359301E171112 4011666509550 Air hose DLS 40 16-9/50m 159304E171113 4011666509567 Air hose DLS 40 21-13/50m 159304E270000 4011666501745 Pressure switch MDR 2-11 351114E270001 4011666502087 Pressure switch MDR 4-16 351114E270018 4011666502179 Relief valve ELV 5 351114E270019 4011666502186 Relief valve ELV 4 351114E270020 4011666501738 Relief valve ELV 2 351114E270021 4011666505361 Relief valve ELV3W 351114
Product informationArt. no. EAN code Type Product group
261 Ap
pe
nd
ix
E270022 4011666505378 Relief valve ELV3WS 351114E270110 4011666505385 Pressure switch MDR 3-11 351114E270111 4011666505392 Pressure switch MDR 3-16 351114E270112 4011666505408 Pressure switch MDR 3-11-R 3/4 351114E270113 4011666505415 Pressure switch MDR 3-16-R3/4 351114E270114 4011666505422 Pressure switch MDR 3-11-R 3/6,3 351114E270115 4011666505439 Pressure switch MDR 3-16-R3/6,3 351114E270116 4011666505446 Pressure switch MDR 3-11-R3/10 351114E270117 4011666505453 Pressure switch MDR 3-16-R3/10 351114E670001 4011666517296 Pressure gauge MM-W 50-10b 351110E670002 4011666501721 Pressure gauge MM-W 50-16b 351110E670003 4011666502193 Pressure gauge MM-W 50-25b 351110E670004 4011666502209 Pressure gauge MM-S 50-16b 351110E670005 4011666502216 Pressure gauge MM-S 50-25b 351110E670006 4011666502223 Pressure gauge MM-W 63-16b 351110E670007 4011666502230 Pressure gauge MM-W 63-25b 351110E670008 4011666502247 Pressure gauge MM-S 63-16b 351110E670009 4011666502254 Pressure gauge MM-S 63-25b 351110E670010 4011666502261 Pressure gauge MM-W 80-16b 351110E670011 4011666502278 Pressure gauge MM-W 80-25b 351110E670012 4011666502285 Pressure gauge MM-S 80-16b 351110E670013 4011666502292 Pressure gauge MM-S 80-25b 351110E670014 4011666502308 Pressure gauge MM-W 40-10b 351110E670017 4011666517319 Pressure gauge MM-W 40-16b 351110E670018 4011666517326 Pressure gauge MM-W 50-6b 351110E670020 4011666517340 Pressure gauge MM-W 50-6b 351110E670021 4011666517357 Pressure gauge MM-W 50-10b 351110E670025 4011666517364 Pressure gauge MM-W 63-6b 351110E670026 4011666517371 Pressure gauge MM-W 63-10b 351110E670028 4011666517388 Pressure gauge MM-S 40-6b 351110E670029 4011666517395 Pressure gauge MM-S 40-16b 351110E670030 4011666517401 Pressure gauge MM-S 50-6b 351110E670031 4011666517418 Pressure gauge MM-S 50-10b 351110E670032 4011666517425 Pressure gauge MM-S 63-6b 351110E670033 4011666517432 Pressure gauge MM-S 63-10b 351110E670040 4011666517449 Pressure gauge MM-W 40-6b 351110E670100 4011666517456 Pressure gauge MM-S 100-16b 351110E670101 4011666517463 Pressure gauge MM-S 100-25b 351110E670102 4011666517470 Pressure gauge MM-S 100-6b 351110E670103 4011666517487 Pressure gauge MM-S 100-10b 351110E670104 4011666517494 Pressure gauge MM-S 100-16b 351110E670105 4011666517500 Pressure gauge MM-S 100-25b 351110E700001 4011666502315 Quick-release coupling SK-NW7,2-G1/4a 161311E700002 4011666502322 Quick-release coupling SK-NW7,2-G3/8a 161311E700003 4011666502339 Quick-release coupling SK-NW7,2-G1/2a 161311E700004 4011666502346 Quick-release coupling SK-NW7,2-G1/4i 161311E700005 4011666502353 Quick-release coupling SK-NW7,2-G3/8i 161311E700006 4011666502360 Quick-release coupling SK-NW7,2-G1/2i 161311E700007 4011666502377 Quick-release coupling SK-NW7,2-6mm 161311E700008 4011666502384 Quick-release coupling SK-NW7,2-9mm 161311E700010 4011666502391 Plug-in socket STNP-MS-NW7,2-6mm 161312E700011 4011666502407 Plug-in socket STNP-MS-NW7,2-9mm 161312E700050 4011666509963 Safety valve SV-G1/2a-8 bar 351112E700051 4011666510242 Safety valve SV-G1/2a-11 bar 351112E700052 4011666510259 Safety valve SV-G1/2a-16 bar 351112E700053 4011666517517 Safety valve SV-G3/4a-8 bar 351112E700054 4011666517524 Safety valve SV-G3/4a-11 bar 351112E700055 4011666517531 Safety valve SV-G3/4a-16 bar 351112E700057 4011666517555 Safety valve SV-G1a-11 bar 351112E700058 4011666517562 Safety valve SV-G1a-16 bar 351112E700102 4011666501752 Safety valve SV-G1/4a-11 bar 351112E700103 4011666502445 Safety valve SV-G1/4a-16 bar 351112E700104 4011666501769 Safety valve SV-G3/8a-11 bar 351112E700105 4011666502452 Safety valve SV-G3/8a-16 bar 351112E700106 4011666502469 Safety valve SV-G1/2a-11 bar 351112E700107 4011666502476 Safety valve SV-G1/2a-16 bar 351112E700120 4011666505460 Distributors VT 2 G3/8i-2xSK 161311E700121 4011666505477 Distributors VT 2 G3/8i-3xSK 161311E700209 4011666505484 Quick-release coupling SK-NW7,2-13mm 161311E700212 4011666505491 Plug-in socket STNP-MS-NW7,2-13mm 161312E700213 4011666505507 Plug nipple STNP-MS-NW7,2-G1/4a 161312E700214 4011666505514 Plug nipple STNP-MS-NW7,2-G3/8a 161312E700215 4011666505521 Plug nipple STNP-MS-NW7,2-G1/2a 161312E700216 4011666505538 Plug nipple STNP-MS-NW7,2-G1/4i 161312E700217 4011666505545 Plug nipple STNP-MS-NW7,2-G3/8i 161312E700218 4011666505552 Plug nipple STNP-MS-NW7,2-G1/2i 161312
Product informationArt. no. EAN code Type Product group
262Ap
pe
nd
ix
E700220 4011666519702 Plug nipple STNP-R1/4a drehbar 161312E700231 4011666519849 Hose failure safety device SLBS 3/8 359301E700232 4011666519856 Hose failure safety device SLBS 1/2 359301E730023 4011666502490 Air hose DLS-SF 19-12,7/50m 159303E730024 4011666519009 Air hose DLS-SF 19-12,7/25m 159303E730031 4011666502513 Air hose DLS-SF 11-6,3/50m 159303E730033 4011666502537 Air hose DLS-SF 15,5-10/50m 159303E730036 4011666518996 Air hose DLS-SF 15,5-10/25m 159303E730037 4011666518989 Air hose DLS-SF 11-6,3/25m 159303E730040 4011666519016 Air hose DLS-SF 27-19/25m 159303E730041 4011666519023 Air hose DLS-SF 27-19/50m 159303E740002 4011666502551 Air hose DLS 11-6/50m 159301E740003 4011666518941 Air hose DLS 11-6/25m 159301E740011 4011666502575 Air hose DLS 15-9/50m 159301E740012 4011666518958 Air hose DLS 15-9/25m 159301E740021 4011666502599 Air hose DLS 18,5-12,5/50m 159301E740022 4011666518965 Air hose DLS 18,5-12,5/25m 159301E740042 4011666518972 Air hose DLS-OA 15-9/25m 159302E770022 4011666517579 Hose nozzle STL-G1/8a x 4mm 161321E770023 4011666517586 Hose nozzle STL-G1/8a x 6mm 161321E770024 4011666517593 Hose nozzle STL-G1/4a x 4mm 161321E770033 4011666517609 Hose nozzle STL-G3/4a x 13mm 161321E770034 4011666517616 Hose nozzle STL-G3/4a x 19mm 161321E770049 4011666509468 Hose connecting tube SLVR 4mm 161321E770052 4011666517630 Hose connecting tube SLVR 13mm 161321E770061 4011666517647 Reduction fitting RDS-G3/8a x G1/8i 161342E770062 4011666517654 Reduction fitting RDS-G1/2a x G1/8i 161342E770063 4011666517661 Reduction fitting RDS-G1/2a x G1/4i 161342E770064 4011666517678 Reduction fitting RDS-G3/4a x G3/8i 161342E770073 4011666505583 Sleeve MU-MS-G3/4i 161343E770074 4011666517685 Sleeve MU-MS-G1i 161343E770076 4011666517692 Sleeve MU-MS-G1/8i 161343E770077 4011666505606 Reduction fitting RDS-G3/4a x G1/2i 161342E770078 4011666501271 Reduction fitting RDS-G1a x G1/2i 158302E770079 4011666501288 Reduction fitting RDS-G1 x G3/4i 158302E770080 4011666517708 Reducing nipple RDN-G1/8a x G1/8i 161342E770081 4011666512789 Reducing nipple RDN-G1/8a x G1/4i 161342E770082 4011666517715 Reducing nipple RDN-G1/4a x G1/8i 161342E770083 4011666517722 Reducing nipple RDN-G1/4a x G1/4i 161342E770084 4011666517739 Reducing nipple RDN-G3/8a x G1/4i 161342E770085 4011666517746 Reducing nipple RDN-G3/8a x G3/8i 161342E770086 4011666517753 Reducing nipple RDN-G1/2a x G3/8i 161342E770087 4011666517760 Reducing nipple RDN-G1/2a x G1/2i 161342E770092 4011666502780 Check valve RV-G1/2i 351112E770093 4011666501295 Reduction fitting RDS-G1 1/2a x G1i 158302E770094 4011666501301 Reduction fitting RDS-G2a x G1i 158302E770095 4011666518262 Reduction fitting RDS-G1 1/4a x G1/2i 158302E770096 4011666518279 Reduction fitting RDS-G1 1/4a x G3/4i 158302E770125 4011666502858 Sealing tape BND-12mx12mm/10 597301E770126 4011666901996 Leak search spray LKSS 300 ml 597301E770210 4011666505613 Hose clamp SLK 11-13mm 359301E770211 4011666505620 Hose clamp SLK 13-15mm 359301E770212 4011666505637 Hose clamp SLK 15-18mm 359301E770215 4011666505644 Terminal screw SRK 10-16mm 359301E770216 4011666505651 Terminal screw SRK 12-20mm 359301E770217 4011666505668 Terminal screw SRK 16-25mm 359301E770218 4011666505675 Terminal screw SRK 20-32mm 359301E770225 4011666505682 Hose nozzle STL-G1/4a x 6mm 161321E770226 4011666505705 Hose nozzle STL-G1/4a x 9mm 161321E770227 4011666505712 Hose nozzle STL-G3/8a x 6mm 161321E770228 4011666505729 Hose nozzle STL-G3/8a x 9mm 161321E770229 4011666505736 Hose nozzle STL-G3/8a x 13mm 161321E770230 4011666505743 Hose nozzle STL-G1/2a x 6mm 161321E770231 4011666505750 Hose nozzle STL-G1/2a x 9mm 161321E770232 4011666505767 Hose nozzle STL-G1/2a x 13mm 161321E770235 4011666505774 Hose nozzle STL-G1/4i x 6mm 161321E770236 4011666505781 Hose nozzle STL-G1/4i x 9mm 161321E770237 4011666505804 Hose nozzle STL-G3/8i x 6mm 161321E770238 4011666505811 Hose nozzle STL-G3/8i x 9mm 161321E770241 4011666505835 Hose nozzle STL-G1/2i x 9mm 161321E770242 4011666505842 Hose nozzle STL-G1/2i x 13mm 161321E770250 4011666505859 Hose connecting tube SLVR 6mm 161321E770251 4011666505866 Hose connecting tube SLVR 9mm 161321E770255 4011666505873 Double nipple DN-St-G1/4a x G1/8a 161341E770256 4011666505903 Double nipple DN-St-G1/4a x G1/4a 161341E770257 4011666505910 Double nipple DN-St-G3/8a x G1/4a 161341
Product informationArt. no. EAN code Type Product group
263 Ap
pe
nd
ix
E770258 4011666505927 Double nipple DN-St-G3/8a x G3/8a 161341E770259 4011666505934 Double nipple DN-St-G1/2a x G3/8a 161341E770260 4011666505941 Double nipple DN-St-G1/2a x G1/2a 161341E770265 4011666505958 Reduction fitting RDS-G1/4a x G1/8i 161342E770266 4011666505965 Reduction fitting RDS-G3/8a x G1/4i 161342E770267 4011666505972 Reduction fitting RDS-G1/2a x G3/8i 161342E770268 4011666506009 Reducing nipple RDN-G1/4a x G3/8i 161342E770269 4011666506016 Reducing nipple RDN-G3/8a x G1/2i 161342E770270 4011666506023 Sleeve MU-MS-G1/4i 161343E770271 4011666506030 Sleeve MU-MS-G3/8i 161343E770272 4011666506047 Sleeve MU-MS-G1/2i 161343E770275 4011666506054 Reducing nipple RDN-G1/2a x G3/4i 161342E770288 4011666506061 Double nipple DN-St-G1/2a x G1/4a 161341E771130 4011666500151 Oil OEMIN-DLW 0,1 597401E771140 4011666519726 Thread-locking liquid SSI 50ml 597301E771142 4011666912305 Thread-locking liquid SSI 10ml 597301E800100 4011666506078 Terminal holder HA-13-20mm/50 258301E800212 4011666519580 Dead-end distribution box EVM 3/8-1/2 158303E800213 4011666519597 Dead-end distribution box EVM 2 x 3/8-1/2 158303E800214 4011666519603 Air connection block STS-LDDM 3/8-2x1/2 158303E800230 4011666914583 Air distribution socket RLD-B 2x1/2i 158303E800231 4011666914590 Air distribution socket RLD-B 3x1/2i 158303E800232 4011666914606 Air distribution socket RLD-B 4x1/2i 158303E800233 4011666914613 Air distribution socket RLD-B 6x1/2i 158303E800234 4011666915252 Air distribution socket RLD-B 4x1i-1/2i 158303E800240 4011666914620 Air distribution socket RLD-T 2x1/2i 158303E800241 4011666914637 Air distribution socket RLD-T 3x1/2i 158303E800242 4011666914644 Air distribution socket RLD-T 4x1/2i 158303E800243 4011666915764 Air distribution socket RLD-BT 2+2x1/2i 158303E800244 4011666915771 Air distribution socket RLD-BT 2+3x1/2i 158303E800245 4011666915689 Air distribution socket RLD-T 2xSK 158303E800246 4011666915726 Air distribution socket RLD-T 3xSK 158303E800247 4011666915740 Air distribution socket RLD-T 4xSK 158303E800248 4011666915702 Air distribution socket RLD-T 2xSK-DM 158303E800255 4011666915696 Air distribution socket RLD-T 2xSSK 158303E800256 4011666915733 Air distribution socket RLD-T 3xSSK 158303E800257 4011666915757 Air distribution socket RLD-T 4xSSK 158303E800260 4011666915719 Air distribution socket RLD-T 2xSK-FDM 158303E800265 4011666916358 Air distribution socket RLD-T 2xSK-FE 158303E800266 4011666916372 Air distribution socket RLD-T 3xSK-FE 158303E800267 4011666916389 Air distribution socket RLD-T 4xSK-FE 158303E815026 4011666503190 Assembly clips MKL 4-7mm/18/50 258301E815027 4011666503206 Assembly clips MKL 8-12mm/18/50 258301E815028 4011666506269 Assembly clips MKL 1-4mm/18/50 258301E815030 4011666503213 Support sleeve KSY-SH15 158302E815035 4011666503220 Screw fitting KSY-GE15-R1/2a 158302E815036 4011666503237 Angular male connector KSY-WEV15-R1/2a 158302E815037 4011666503244 Screw fitting KSY-G15 158302E815038 4011666503251 Thr.pipe angle KSY-WV90-15 158302E815039 4011666503268 T-union KSY-TVS15 158302E815100 4011666503312 Compressed air pipe DLR-R-PA-S 15x12mm/25m 158301E815107 4011666520166 Compressed air pipe DLR-S-PA-G 15x12mm/6m 158301E815108 4011666519764 Compressed air pipe DLR-R-PA-G 15x12mm/10m 158301E815109 4011666519771 Compressed air pipe DLR-R-PA-G 15x12mm/25m 158301E815125 4011666506245 Pipe clamp RK15schwarz/25 258301E815205 4011666520173 Compressed air pipe DLR-ALU-G 15x12mm/6m 158301E815245 4011666915788 Air distribution socket RLD-BT 15-2xSK 158303E815246 4011666915818 Air distribution socket RLD-BT 15-3xSK 158303E815248 4011666915962 Air distribution socket RLD-BT 15-KH-2xSK-DM 158303E815255 4011666915900 Air distribution socket RLD-BT 15-KH-2xSSK 158303E815256 4011666915931 Air distribution socket RLD-BT 15-KH-3xSSK 158303E815260 4011666915993 Air distribution socket RLD-BT 15-KH-2xSK-FDM 158303E815265 4011666916396 Air distribution socket RLD-BT 15-KH-2xSK-FE 158303E815266 4011666916426 Air distribution socket RLD-BT 15-KH-3xSK-FE 158303E815270 4011666915351 Air distribution socket RLD-B 15-1/2i 158303E815271 4011666915412 Air distribution socket RLD-B 15-KH-1/2i 158303E815274 4011666915627 Air distribution socket RLD-B 3x15-1/2i 158303E815275 4011666917041 Air distribution socket RLD-B 4x15-2x1/2i 158303E815276 4011666915269 Air distribution socket RLD-B 15-2x1/2i 158303E815280 4011666915382 Air distribution socket RLD-B 15-SK 158303E815281 4011666915443 Air distribution socket RLD-B 15-KH-SK 158303E815283 4011666915597 Air distribution socket RLD-B 2x15-SK 158303E815284 4011666915658 Air distribution socket RLD-B 3x15-SK 158303E815286 4011666915290 Air distribution socket RLD-B 15-1/2i-SK 158303E815291 4011666915474 Air distribution socket RLD-B 15-KH-SSK 158303E815296 4011666915320 Air distribution socket RLD-B 15-1/2i-SSK 158303
Product informationArt. no. EAN code Type Product group
264Ap
pe
nd
ix
E815314 4011666510396 Blind cap STV-BK 15 158302E815333 4011666510563 Straight screw-on click connector STV-GES15-G1/2i 158302E815335 4011666804044 Straight screw-in click connector STV-GES15-G1/2a 158302E815336 4011666510570 Angular male plug-in connector WV15-G1/2a 158302E815337 4011666510587 Straight plug-in connector STV-GS15 158302E815338 4011666510594 Right-angle connector STV-W90-15 158302E815339 4011666510600 T-plug-in connector STV-TS15 158302E815345 4011666510655 Water collector STS-WSA 15 158302E815350 4011666510709 Air shut-off cock STS-LAH 15-2GES 15 158302E815352 4011666512543 Sliding sleeve STV-SM 15 158302E815355 4011666517777 Right-angle connector STV-W45-15 158302E815360 4011666518880 Connecting adapter VST15xG1/2a 158302E815365 4011666519115 Air inlet box STS-LEM15-G1/2i-SK-GES15 158303E815367 4011666519177 Air connection block STS-LDDM15-SK-2GES15 158303E815369 4011666519320 Dead-end distribution box EVM15-SK-GES15 158303E815371 4011666519351 Dead-end distribution box EVM15-2SK-GES15 158303E815373 4011666519535 Dead-end distribution box EVM15-FDM-SK-GES15 158303E815374 4011666519474 Dead-end distribution box EVM15-DM-SK-GES15 158303E815376 4011666519566 Dead-end distribution box EVM15-FDM/N-SK-GES15 158303E815379 4011666519382 Dead-end distribution box EVM15-SK-GES15 158303E815380 4011666519412 Dead-end distribution box EVM15-2SK-GES15 158303E815381 4011666519863 Straight screw-in click connector STV-GES15-G1/2a V4A 158302E815383 4011666520050 Straight screw-on click connector STV-GES15-G1/2i V4A 158302E815385 4011666519870 Straight plug-in connector STV-GS15 V4A 158302E815386 4011666519887 Right-angle connector STV-W90/15 V4A 158302E815387 4011666519894 Right-angle connector STV-W45/15 V4A 158302E815388 4011666519900 T-plug-in connector STV-T15 V4A 158302E815390 4011666520067 Sliding sleeve STV-SM 15 V4A 158302E815391 4011666519917 Blind cap STV-BK 15 V4A 158302E815392 4011666519924 Angular male plug-in connector WV15-G1/2a-V4A 158302E815400 4011666520180 Compressed air pipe DLR-V4A 15x13mm/6m 158301E815414 4011666510716 Water collector STS-WSM 15 158302E815425 4011666520487 Pipe clamp RK15grau/25 258301E815445 4011666915849 Air distribution socket RLD-BT 15-KH-2xSK 158303E815446 4011666915870 Air distribution socket RLD-BT 15-KH-3xSK 158303E818030 4011666503732 Support sleeve KSY-SH18 158302E818033 4011666506443 T-union KSY-TVS18-15-18 158302E818035 4011666503749 Screw fitting KSY-GE18-R1/2a 158302E818036 4011666503756 Angular male connector KSY-WEV18-R1/2a 158302E818037 4011666503763 Screw fitting KSY-G18 158302E818038 4011666503770 Thr.pipe angle KSY-WV90-18 158302E818039 4011666503787 T-union KSY-TVS18 158302E818100 4011666503831 Compressed air pipe DLR-R-PA-S 18x14mm/25m 158301E818107 4011666520203 Compressed air pipe DLR-S-PA-G 18x14mm/6m 158301E818108 4011666519788 Compressed air pipe DLR-R-PA-G 18x14mm/10m 158301E818109 4011666519795 Compressed air pipe DLR-R-PA-G 18x14mm/25m 158301E818125 4011666506528 Pipe clamp RK18schwarz/25 258301E818205 4011666520197 Compressed air pipe DLR-ALU-G 18x15mm/6m 158301E818245 4011666915795 Air distribution socket RLD-BT 18-2xSK 158303E818246 4011666915825 Air distribution socket RLD-BT 18-3xSK 158303E818248 4011666915979 Air distribution socket RLD-BT 18-KH-2xSK-DM 158303E818255 4011666915917 Air distribution socket RLD-BT 18-KH-2xSSK 158303E818256 4011666915948 Air distribution socket RLD-BT 18-KH-3xSSK 158303E818260 4011666916006 Air distribution socket RLD-BT 18-KH-2xSK-FDM 158303E818265 4011666916402 Air distribution socket RLD-BT 18-KH-2xSK-FE 158303E818266 4011666916433 Air distribution socket RLD-BT 18-KH-3xSK-FE 158303E818270 4011666915368 Air distribution socket RLD-B 18-1/2i 158303E818271 4011666915429 Air distribution socket RLD-B 18-KH-1/2i 158303E818274 4011666915634 Air distribution socket RLD-B 3x18-1/2i 158303E818275 4011666917058 Air distribution socket RLD-B 4x18-2x1/2i 158303E818276 4011666915276 Air distribution socket RLD-B 18-2x1/2i 158303E818280 4011666915399 Air distribution socket RLD-B 18-SK 158303E818281 4011666915450 Air distribution socket RLD-B 18-KH-SK 158303E818283 4011666915603 Air distribution socket RLD-B 2x18-SK 158303E818284 4011666915665 Air distribution socket RLD-B 3x18-SK 158303E818286 4011666915306 Air distribution socket RLD-B 18-1/2i-SK 158303E818291 4011666915481 Air distribution socket RLD-B 18-KH-SSK 158303E818296 4011666915337 Air distribution socket RLD-B 18-1/2i-SSK 158303E818314 4011666510808 Blind cap STV-BK 18 158302E818332 4011666510945 Straight screw-on click connector STV-GES18-G1/2i 158302E818333 4011666510952 Straight screw-on click connector STV-GES18-G3/4i 158302E818334 4011666510969 Straight screw-in click connector STV-GES18-G3/4a 158302E818335 4011666510976 Straight screw-in click connector STV-GES18-G 1/2a 158302E818336 4011666510983 Angular male plug-in connector WV18-G1/2a 158302E818337 4011666510990 Straight plug-in connector STV-GS18 158302E818338 4011666511003 Right-angle connector STV-W90-18 158302
Product informationArt. no. EAN code Type Product group
265 Ap
pe
nd
ix
E818339 4011666511010 T-plug-in connector STV-TS18 158302E818345 4011666511065 Water collector STS-WSA 18 158302E818350 4011666511119 Air shut-off cock STS-LAH 18-2GES 18 158302E818352 4011666512550 Sliding sleeve STV-SM 18 158302E818355 4011666517784 Right-angle connector STV-W45-18 158302E818360 4011666518897 Connecting adapter VST18xG1/2a 158302E818361 4011666518903 Connecting adapter VST18xG3/4a 158302E818365 4011666519122 Air inlet box STS-LEM18-G1/2i-SK-GES18 158303E818367 4011666519184 Air connection block STS-LDDM18-SK-2GES18 158303E818369 4011666519337 Dead-end distribution box EVM18-SK-GES18 158303E818371 4011666519368 Dead-end distribution box EVM18-2SK-GES18 158303E818373 4011666519542 Dead-end distribution box EVM18-FDM-SK-GES18 158303E818374 4011666519481 Dead-end distribution box EVM18-DM-SK-GES18 158303E818376 4011666519573 Dead-end distribution box EVM18-FDM/N-SK-GES18 158303E818379 4011666519399 Dead-end distribution box EVM18-SK-GES18 158303E818380 4011666519429 Dead-end distribution box EVM18-2SK-GES18 158303E818414 4011666511126 Water collector STS-WSM 18 158302E818425 4011666520494 Pipe clamp RK18grau/25 258301E818445 4011666915856 Air distribution socket RLD-BT 18-KH-2xSK 158303E818446 4011666915887 Air distribution socket RLD-BT 18-KH-3xSK 158303E818448 4011666518040 Pipe clamp RSL 15-19mm/25 258301E822026 4011666504302 Assembly clips MKL 4-7mm/22/50 258301E822027 4011666504746 Assembly clips MKL 8-12mm/22/50 258301E822028 4011666506719 Assembly clips MKL 1-4mm/22/50 258301E822030 4011666504319 Support sleeve KSY-SH22 158302E822031 4011666506726 Angular male connector KSY-WEV22-R1/2a 158302E822032 4011666506733 Screw fitting KSY-GE22-R1/2a 158302E822033 4011666504326 T-union KSY-TVS22-15-22 158302E822034 4011666504333 T-union KSY-TVS22-18-22 158302E822035 4011666504340 Screw fitting KSY-GE22-R3/4a 158302E822036 4011666504357 Angular male connector KSY-WEV22-R3/4a 158302E822037 4011666504364 Screw fitting KSY-G22 158302E822038 4011666504371 Thr.pipe angle KSY-WV90-22 158302E822039 4011666504388 T-union KSY-TVS22 158302E822100 4011666504432 Compressed air pipe DLR-R-PA-S 22x18mm/25m 158301E822106 4011666505125 Compressed air pipe DLR-S-PA-S 22x18mm/6m 158301E822107 4011666520210 Compressed air pipe DLR-S-PA-G 22x18mm/6m 158301E822109 4011666519801 Compressed air pipe DLR-R-PA-G 22x18mm/25m 158301E822125 4011666506825 Pipe clamp RK22schwarz/25 258301E822205 4011666520227 Compressed air pipe DLR-ALU-G 22x18mm/6m 158301E822245 4011666915801 Air distribution socket RLD-BT 22-2xSK 158303E822246 4011666915832 Air distribution socket RLD-BT 22-3xSK 158303E822248 4011666915986 Air distribution socket RLD-BT 22-KH-2xSK-DM 158303E822255 4011666915924 Air distribution socket RLD-BT 22-KH-2xSSK 158303E822256 4011666915955 Air distribution socket RLD-BT 22-KH-3xSSK 158303E822260 4011666916013 Air distribution socket RLD-BT 22-KH-2xSK-FDM 158303E822265 4011666916419 Air distribution socket RLD-BT 22-KH-2xSK-FE 158303E822266 4011666916440 Air distribution socket RLD-BT 22-KH-3xSK-FE 158303E822270 4011666915375 Air distribution socket RLD-B 22-1/2i 158303E822271 4011666915436 Air distribution socket RLD-B 22-KH-1/2i 158303E822274 4011666915641 Air distribution socket RLD-B 3x22-1/2i 158303E822275 4011666917065 Air distribution socket RLD-B 4x22-2x1/2i 158303E822276 4011666915283 Air distribution socket RLD-B 22-2x1/2i 158303E822280 4011666915405 Air distribution socket RLD-B 22-SK 158303E822281 4011666915467 Air distribution socket RLD-B 22-KH-SK 158303E822283 4011666915610 Air distribution socket RLD-B 2x22-SK 158303E822284 4011666915672 Air distribution socket RLD-B 3x22-SK 158303E822286 4011666915313 Air distribution socket RLD-B 22-1/2i-SK 158303E822291 4011666915498 Air distribution socket RLD-B 22-KH-SSK 158303E822296 4011666915344 Air distribution socket RLD-B 22-1/2i-SSK 158303E822314 4011666511225 Blind cap STV-BK 22 158302E822330 4011666511362 T-plug-in connector STV-TS22-15-22 158302E822331 4011666511379 T-plug-in connector STV-TS22-18-22 158302E822332 4011666511386 Straight screw-on click connector STV-GES22-G1/2i 158302E822333 4011666511393 Straight screw-on click connector STV-GES22-G3/4i 158302E822334 4011666511409 Straight screw-in click connector STV-GES22-G3/4a 158302E822335 4011666511416 Straight screw-in click connector STV-GES22-G1/2a 158302E822336 4011666511423 Angular male plug-in connector WV22-G 3/4a 158302E822337 4011666511430 Straight plug-in connector STV-GS22 158302E822338 4011666511447 Right-angle connector STV-W90-22 158302E822339 4011666511454 T-plug-in connector STV-TS22 158302E822345 4011666511508 Water collector STS-WSA 22 158302E822350 4011666511553 Air shut-off cock STS-LAH 22-2GES 22 158302E822351 4011666511560 Reducing plug-in connector STV-GRS 22a x 18i 158302E822352 4011666512567 Sliding sleeve STV-SM 22 158302E822355 4011666517791 Right-angle connector STV-W45-22 158302
Product informationArt. no. EAN code Type Product group
266Ap
pe
nd
ix
E822360 4011666518910 Connecting adapter VST22xG1/2a 158302E822361 4011666518927 Connecting adapter VST22xG3/4a 158302E822365 4011666520234 Energy-saving system STS-ESAT 22 S 158302E822381 4011666519931 Straight screw-in click connector STV-GES22-G1/2a-V4A 158302E822382 4011666519948 Straight screw-in click connector STV-GES22-G3/4a-V4A 158302E822383 4011666519955 Straight screw-on click connector STV-GES22-G1/2i-V4A 158302E822384 4011666519962 Straight screw-on click connector STV-GES22-G3/4i-V4A 158302E822385 4011666519979 Straight plug-in connector STV-GS22 V4A 158302E822386 4011666519986 Right-angle connector STV-W90/22 V4A 158302E822387 4011666519993 Right-angle connector STV-W45/22 V4A 158302E822388 4011666520005 T-plug-in connector STV-T22 V4A 158302E822389 4011666520012 T-plug-in connector STV-T22-15-22 V4A 158302E822390 4011666520029 Sliding sleeve STV-SM 22 V4A 158302E822391 4011666520036 Blind cap STV-BK 22 V4A 158302E822392 4011666520043 Angular male plug-in connector WV22-G3/4a-V4A 158302E822400 4011666520241 Compressed air pipe DLR-V4A 22x19,6mm/6m 158301E822414 4011666511577 Water collector STS-WSM 22 158302E822425 4011666520500 Pipe clamp RK22grau/25 258301E822445 4011666915863 Air distribution socket RLD-BT 22-KH-2xSK 158303E822446 4011666915894 Air distribution socket RLD-BT 22-KH-3xSK 158303E822448 4011666518064 Pipe clamp RSL 21-23mm/25 258301E828030 4011666510037 Support sleeve KSY-SH28 158302E828031 4011666510044 Screwed bend fitting KSY-BV28 158302E828033 4011666510051 T-union KSY-TVS28-15-28 158302E828034 4011666510068 T-union KSY-TVS28-18-28 158302E828035 4011666510075 Screw fitting KSY-GE28-R1a 158302E828036 4011666510082 Screw fitting KSY-GE28-R3/4a 158302E828037 4011666510099 Screw fitting KSY-G28 158302E828038 4011666510105 Thr.pipe angle KSY-WV90-28 158302E828039 4011666510112 T-union KSY-TVS28 158302E828107 4011666520258 Compressed air pipe DLR-S-PA-G 28x23mm/6m 158301E828109 4011666519818 Compressed air pipe DLR-R-PA-G 28x23mm/25m 158301E828125 4011666520463 Pipe clamp RK28schwarz/25 258301E828205 4011666520265 Compressed air pipe DLR-ALU-G 28x24mm/6m 158301E828314 4011666511645 Blind cap STV-BK 28 158302E828328 4011666511652 T-plug-in connector STV-TS28-18-18 158302E828329 4011666511669 T-plug-in connector STV-TS28-22-22 158302E828330 4011666511676 T-plug-in connector STV-TS28-18-28 158302E828331 4011666511683 T-plug-in connector STV-TS28-22-28 158302E828333 4011666511690 Straight screw-on click connector STV-GES28-G1i 158302E828335 4011666511706 Straight screw-in click connector STV-GES28-G1a 158302E828336 4011666518873 Angular male plug-in connector WV28-G1a 158302E828337 4011666511713 Straight plug-in connector STV-GS28 158302E828338 4011666511720 Right-angle connector STV-W90-28 158302E828339 4011666511737 T-plug-in connector STV-TS28 158302E828340 4011666511744 Reducing plug-in connector STV-GRS 28a x 18i 158302E828341 4011666511751 Reducing plug-in connector STV-GRS 28a x 22i 158302E828350 4011666511768 Air shut-off cock STS-LAH 28-2GES 28 158302E828352 4011666512574 Sliding sleeve STV-SM 28 158302E828355 4011666517807 Right-angle connector STV-W45-28 158302E828361 4011666518934 Connecting adapter VST28xG1a 158302E828365 4011666520289 Energy-saving system STS-ESAT 28 S 158302E828425 4011666520517 Pipe clamp RK28grau/25 258301E828448 4011666518057 Pipe clamp RSL 26-28mm/25 258301E832026 4011666507068 Assembly clips MKL 4-7mm/32/50 258301E832027 4011666507075 Assembly clips MKL 8-12mm/32/50 258301E832110 4011666520944 Compressed air pipe DLR-S-PE-G 32x26,2mm/6m 158301E832111 4011666520982 Compressed air pipe DLR-R-PE-G 32x26,2mm/50m 158301E832205 4011666520296 Compressed air pipe DLR-ALU-G 32x28mm/6m 158301E832350 4011666518422 Air shut-off cock MKS-LAH 32-2AVA 32 158302E832352 4011666518439 Sliding sleeve MKS-SM 32 158302E832355 4011666518446 Thr.pipe angle MKS-WV45-32x32mm 158302E832365 4011666520302 Energy-saving system MKS-ESAT 32 MK 158302E832425 4011666520524 Pipe clamp RK32grau/25 258301E832435 4011666518453 Connection screw fitting MKS-AVA 32xR1a 158302E832436 4011666518460 Connection screw fitting MKS-AVI 32xG1i 158302E832437 4011666518477 Coupling MKS-SBV 32x32 158302E832438 4011666518484 Thr.pipe angle MKS-WV90-32x32mm 158302E832439 4011666518491 T-union MKS-TVS32x32x32mm 158302E832440 4011666518507 T-union MKS-TVS32mmxG1ix32mm 158302E832442 4011666518514 Thr.pipe angle MKS-WV90-32mmxR1a 158302E832443 4011666518521 Thr.pipe angle MKS-WV90-32mmxG1i 158302E832445 4011666518538 O-ring MKS-OR 32x3mm 158302E832446 4011666518545 Intermediate ring MKS-ZR 37,5x33mm 158302E832447 4011666518552 Clamping ring MKS-KLR 38,5x33mm 158302E832509 4011666507136 Air outlet SKS-LAD 32-1 GES 22 158302
Product informationArt. no. EAN code Type Product group
267 Ap
pe
nd
ix
E832510 4011666507143 Air outlet SKS-LAD 32-1 GES 15 158302E832511 4011666507150 Air outlet SKS-LAD 32-1 GES 18 158302E832535 4011666507174 Connection screw fitting SKS-AVA 32mm x R1a 158302E832536 4011666507181 Connection screw fitting SKS-AVI 32mm x G1i 158302E832537 4011666507204 Coupling SKS-SBV 32x32 158302E832538 4011666507211 Thr.pipe angle SKS-W90 32x32mm 158302E832539 4011666507228 T-union SKS-TVS32x32x32mm 158302E832540 4011666507235 T-union SKS-TVS32xR1ix32mm 158302E832541 4011666507242 T-union SKS-TVS32xR3/4ix32mm 158302E832542 4011666507259 Blind cap SKS-BK 32 158302E832545 4011666507266 Reduction fitting SKS-RDS-R1a x R3/4i 158302E832546 4011666507273 Reduction fitting SKS-RDS-R3/4a x R1/2i 158302E832547 4011666507303 Transition screw fitting SKS-UEV32xR1/2a 158302E832548 4011666507310 Transition screw fitting SKS-UEV32 x R3/4a 158302E832550 4011666507327 Air shut-off cock SKS-LAH 32-2 AVI 32 158302E832555 4011666518590 Thr.pipe angle SKS-W45 32x32mm 158302E832565 4011666520319 Energy-saving partition SKS-ESAT 32 SK 158302E832612 4011666924339 Air outlet clamp LAS 32 x G1/2i 158302E832634 4011666924346 Air outlet clamp LAS 32 x G3/4i 158302E835448 4011666511874 Pipe clamp RSL 32-35mm 258301E840025 4011666507365 Pipe clamp RK40weiß/25 258301E840110 4011666520951 Compressed air pipe DLR-S-PE-G 40x32,6mm/6m 158301E840111 4011666520999 Compressed air pipe DLR-R-PE-G 40x32,6mm/50m 158301E840205 4011666520326 Compressed air pipe DLR-ALU-G 40x36mm/6m 158301E840350 4011666518644 Air shut-off cock MKS-LAH 40-2AVA 40 158302E840352 4011666518651 Sliding sleeve MKS-SM 40 158302E840355 4011666518668 Thr.pipe angle MKS-WV45-40x40mm 158302E840365 4011666520333 Energy-saving system MKS-ESAT 40 MK 158302E840435 4011666518675 Connection screw fitting MKS-AVA 40xR1 1/4a 158302E840436 4011666518682 Connection screw fitting MKS-AVI 40xG1 1/4i 158302E840437 4011666518699 Coupling MKS-SBV 40x40 158302E840438 4011666518705 Thr.pipe angle MKS-WV90-40x40mm 158302E840439 4011666518712 T-union MKS-TVS40x40x40mm 158302E840440 4011666518729 T-union MKS-TVS40xG1 1/4ix40mm 158302E840442 4011666518736 Thr.pipe angle MKS-WV90-40mmxR1 1/4a 158302E840443 4011666518743 Thr.pipe angle MKS-WV90-40mmxG1 1/4i 158302E840445 4011666518750 O-ring MKS-OR 40x3,5mm 158302E840446 4011666518767 Intermediate ring MKS-ZR 46,9x41mm 158302E840447 4011666518774 Clamping ring MKS-KLR 48x40,75mm 158302E840510 4011666507457 Air outlet SKS-LAD 40-1 GES 15 158302E840511 4011666507464 Air outlet SKS-LAD 40-1 GES 18 158302E840512 4011666507471 Air outlet SKS-LAD 40-1 GES 22 158302E840535 4011666507501 Connection screw fitting SKS-AVA 40mm x R1 1/4a 158302E840536 4011666507518 Connection screw fitting SKS-AVI 40mm x G1 1/4i 158302E840537 4011666507525 Coupling SKS-SBV 40x40 158302E840538 4011666507532 Thr.pipe angle SKS-W90 40x40mm 158302E840539 4011666507549 T-union SKS-TVS40x40x40mm 158302E840540 4011666507556 T-union SKS-TVS40xR1ix40mm 158302E840541 4011666507563 T-union SKS-TVS40xR2ix40mm 158302E840542 4011666507600 Blind cap SKS-BK 40 158302E840545 4011666507617 Reduction fitting SKS-RDS-R1a x R1/2i 158302E840546 4011666507624 Transition screw fitting SKS-UEV40 x R1a 158302E840550 4011666507631 Air shut-off cock SKS-LAH 40-2AVI 40 158302E840555 4011666517876 Thr.pipe angle SKS-W45 40x40mm 158302E840565 4011666520340 Energy-saving partition SKS-ESAT 40 SK 158302E840612 4011666924353 Air outlet clamp LAS 40 x G1/2i 158302E840634 4011666924360 Air outlet clamp LAS 40 x G3/4i 158302E842448 4011666511980 Pipe clamp RSL 40-43mm 258301E850025 4011666507716 Pipe clamp RK50schwarz/10 258301E850110 4011666520968 Compressed air pipe DLR-S-PE-G 50x40,8mm/6m 158301E850111 4011666521019 Compressed air pipe DLR-R-PE-G 50x40,8mm/50m 158301E850305 4011666520357 Compressed air pipe DLR-ALU-G 50x46mm/6m 158301E850350 4011666512529 Air shut-off cock MKS-LAH 50-2AVA 50 158302E850352 4011666512604 Sliding sleeve MKS-SM 50 158302E850355 4011666517913 Right-angle connector MKS-WV 50x50mm/45 158302E850365 4011666520364 Energy-saving system MKS-ESAT 50 MK 158302E850435 4011666512482 Connection screw fitting MKS-AVA 50xR1 1/2a 158302E850436 4011666512499 Connection screw fitting MKS-AVI 50xG1 1/2i 158302E850437 4011666512512 Coupling MKS-SBV 50x50 158302E850438 4011666512666 Thr.pipe angle MKS-WV90-50x50mm 158302E850439 4011666512635 T-union MKS-TVS50x50x50mm 158302E850440 4011666512628 T-union MKS-TVS50xG1 1/2ix50mm 158302E850442 4011666512642 Thr.pipe angle MKS-WV90-50mmxR1 1/2a 158302E850443 4011666512659 Thr.pipe angle MKS-WV90-50mmxG1 1/2i 158302E850445 4011666512536 O-ring MKS-OR 50x3,5mm 158302E850446 4011666512673 Intermediate ring MKS-ZR 50x56,9mm 158302
Product informationArt. no. EAN code Type Product group
268Ap
pe
nd
ix
E850447 4011666512505 Clamping ring MKS-KLR 50x58mm 158302E850448 4011666518071 Pipe clamp RSL 48-52mm 258301E850510 4011666507754 Air outlet SKS-LAD 50-1 GES 15 158302E850511 4011666507761 Air outlet SKS-LAD 50-1 GES 18 158302E850512 4011666507808 Air outlet SKS-LAD 50-1 GES 22 158302E850535 4011666507815 Connection screw fitting SKS-AVA 50mm x R1 1/2a 158302E850536 4011666507822 Connection screw fitting SKS-AVA 50mm x R2a 158302E850537 4011666507839 Connection screw fitting SKS-AVI 50mm x G1 1/2i 158302E850538 4011666507846 Thr.pipe angle SKS-W90 50x50mm 158302E850539 4011666507853 T-union SKS-TVS50x50x50mm 158302E850540 4011666507907 Coupling SKS-SBV 50x50 158302E850541 4011666507914 T-union SKS-TVS50xR1 1/2ix50mm 158302E850543 4011666507921 Blind cap SKS-BK 50 158302E850545 4011666507938 Reduction fitting SKS-RDS-R1 1/2a x R1/2i 158302E850546 4011666507945 Reduction fitting SKS-RDS-R1 1/2a x R3/4i 158302E850547 4011666507952 Transition screw fitting SKS-UEV50 x R1a 158302E850550 4011666508003 Air shut-off cock SKS-LAH 50-2AVI 50 158302E850555 4011666517951 Thr.pipe angle SKS-W45 50x50mm 158302E850565 4011666520371 Energy-saving partition SKS-ESAT 50 SK 158302E850612 4011666924377 Air outlet clamp LAS 50 x G1/2i 158302E850634 4011666924384 Air outlet clamp LAS 50 x G3/4i 158302E863024 4011666508041 Pipe clamp RK63grau/10 258301E863110 4011666520975 Compressed air pipe DLR-S-PE-G 63x51,4mm/6m 158301E863111 4011666521002 Compressed air pipe DLR-R-PE-G 63x51,4mm/50m 158301E863205 4011666520388 Compressed air pipe DLR-ALU-G 63x58mm/6m 158301E863350 4011666512123 Air shut-off cock MKS-LAH 63-2AVA 63 158302E863352 4011666512611 Sliding sleeve MKS-SM 63 158302E863355 4011666517968 Right-angle connector MKS-WV 63x63mm/45 158302E863365 4011666520395 Energy-saving system MKS-ESAT 63 MK 158302E863435 4011666512130 Connection screw fitting MKS-AVA 63xR2a 158302E863436 4011666512147 Connection screw fitting MKS-AVI 63xG2i 158302E863437 4011666512154 Coupling MKS-SBV 63x63 158302E863438 4011666512161 Thr.pipe angle MKS-WV90-63x63mm 158302E863439 4011666512178 T-union MKS-TVS63x63x63mm 158302E863440 4011666512185 T-union MKS-TVS63xG2ix63mm 158302E863442 4011666512192 Thr.pipe angle MKS-WV90-63mmxR2a 158302E863443 4011666512208 Thr.pipe angle MKS-WV90-63mmxG2i 158302E863445 4011666512215 O-ring MKS-OR 63x5mm 158302E863446 4011666512222 Intermediate ring MKS-ZR 64x72,5mm 158302E863447 4011666512239 Clamping ring MKS-KLR 66,5x73mm 158302E863448 4011666512246 Pipe clamp RSL 60-64mm 258301E863510 4011666508126 Air outlet SKS-LAD 63-1 GES 15 158302E863511 4011666508133 Air outlet SKS-LAD 63-1 GES 18 158302E863512 4011666508140 Air outlet SKS-LAD 63-1 GES 22 158302E863535 4011666508157 Connection screw fitting SKS-AVA 63mm x R2a 158302E863536 4011666508171 Connection screw fitting SKS-AVI 63mm x G2i 158302E863537 4011666518002 Coupling SKS-SBV 63x63 158302E863538 4011666508201 Thr.pipe angle SKS-W90 63x63mm 158302E863539 4011666508218 T-union SKS-TVS63x63x63mm 158302E863540 4011666508225 T-union SKS-TVS63xR1 1/4ix63mm 158302E863541 4011666508232 T-union SKS-TVS63xR2x63mm 158302E863542 4011666508249 Blind cap SKS-BK 63 158302E863545 4011666508256 Reduction fitting SKS-RDS-R1 1/4a x R1/2i 158302E863546 4011666508263 Reduction fitting SKS-RDS-R1 1/4a x R3/4i 158302E863547 4011666508300 Transition screw fitting SKS-UEV63 x R1a 158302E863550 4011666508317 Air shut-off cock SKS-LAH 63-2AVI 63 158302E863555 4011666518019 Thr.pipe angle SKS-W45 63x63mm 158302E863565 4011666520401 Energy-saving partition SKS-ESAT 63 SK 158302E863612 4011666924391 Air outlet clamp LAS 63 x G1/2i 158302E863634 4011666924407 Air outlet clamp LAS 63 x G3/4i 158302F440014 4011666600004 T-nail TN 22/50 NK/10000 574404F440016 4011666600066 T-nail TN 22/60 NK/10000 574404F440017 4011666600073 T-nail TN 22/64 NK/10000 574404F440021 4011666600097 Nail strips RN 29/65 BKH/3000 574406F440024 4011666600158 Nail strips RN 31/80 BKH/3000 574406F440025 4011666600165 Nail strips RN 31/90 BKH/3000 574406F440027 4011666600134 Nail strips RN 31/70 BKH/3000 574406F440120 4011666601322 Nail strips RN 34/100 BKH/2000 574406F440130 4011666914903 Push pin PN 15-0,6 NK/10000 574408F440131 4011666914910 Push pin PN 18-0,6 NK/10000 574408F440132 4011666914927 Push pin PN 22-0,6 NK/10000 574408F440133 4011666914934 Push pin PN 25-0,6 NK/10000 574408G004108 4011666700599 Double nipple SKS-DN-R1a x R1/2a 158302G004109 4011666700605 Double nipple SKS-DN-R1a x R3/4a 158302G004111 4011666700612 Double nipple SKS-DN-R1 1/4a x R3/4a 158302G004123 4011666700063 Double nipple DNL-R1 1/2a x R1 1/2a 357201
Product informationArt. no. EAN code Type Product group
269 Ap
pe
nd
ix
G004177 4011666711687 Pressure switch MDR 2/11 SL F4 351114G010015 4011666700643 Ball valve KH-NI-25 G 1 1/4i 351111G012033 4011666700667 Ball valve KH-20 G1/4i x G1/4a 351111G012038 4011666600035 Pressure gauge MM-W 50-16 351110G012060 4011666903655 Pressure gauge MM-S 40-10b 351110G017010 4011666700698 Reducing nipple RDN-TG-G1i x G1/2i 161342G017011 4011666700704 Reducing nipple RDN-TG-G1 1/4i x G3/4i 161342G017088 4011666700711 Reducing nipple RDN-TG-G1i x G1/2a 161342G025004 4011666700261 Clamping ring KSY-SRI 15 158302G025005 4011666700278 Clamping ring KSY-SRI18 158302G025006 4011666700285 Clamping ring KSY-SRI22 158302G028000 4011666701503 Clamping ring KSY-SRI28 158302G205208 4011666700810 Locking screw VSS-ST-I-R1/2a 161344G205216 4011666700827 Locking screw VSS-ST-I-R3/4a 161344G207010 4011666700353 Safety valve SV-G1/4a-8 bar 351112G405012 4011666700841 Filter element FE-FDM 1/4 W 357212G405013 4011666700858 Filter element FE-FDM 3/8-1/2 W 357212G405014 4011666700865 Filter element FE-FDM 3/4-1 W 357212G408579 4011666702470 Retaining cap HK-K-MMH 10 265401G432011 4011666917034 Locking screw VSS-G1/2a 898501G470592 4011666703781 Ball valve KH-20 G1/2i x G1/2a 351111G502145 4011666700452 Vessel BH-HB 20-11 351103G502316 4011666701749 Vessel BH-HZB 50-11 351103G502448 4011666906694 Vessel BH-HZB 90-11 351103G502455 4011666906687 Vessel BH-VZB 270-11 351102G526002 4011666701206 Attachment disc SBE-Acetat 90x110 STSH 376401G526003 4011666700896 Attachment disc SBE-Min-glas 90x110 STSH 376401H110199 4011666800305 Vessel BH-VZBA 500-11 351101H110202 4011666800312 Vessel BH-VZBA 500-16 351101H110205 4011666800343 Vessel BH-VZBA 90-11 351101H110333 4011666801630 Vessel BH-VZ 750-11 351102H110365 4011666801647 Vessel BH-VZ 750-16 351102H110367 4011666801654 Vessel BH-VZ 1000-11 351102H110369 4011666801661 Vessel BH-VZ 1000-16 351102H110375 4011666802934 Vessel BH-HZ 750-11 351103H110376 4011666801678 Vessel BH-VZ 3000-11 351102H110377 4011666801685 Vessel BH-VZ 3000-16 351102H110386 4011666801708 Vessel BH-VZ 2000-11 351102H110388 4011666801722 Vessel BH-VZ 2000-16 351102H110404 4011666000453 Vessel BH-VZBA 270-11 351101H110407 4011666800350 Vessel BH-VZBA 270-16 351101H110600 4011666904218 Vessel BH-VZB 500-11 351102H110601 4011666904225 Vessel BH-VZB 500-16 351102H110602 4011666904232 Vessel BH-HZB 500-11 351103H110603 4011666904249 Vessel BH-HZB 500-16 351103H110604 4011666904256 Vessel BH-HZ 750-16 351103H110605 4011666904263 Vessel BH-HZ 1000-16 351103H110606 4011666904270 Vessel BH-HZ 2000-11 351103H110607 4011666904287 Vessel BH-HZ 2000-16 351103H110608 4011666904294 Vessel BH-HZ 3000-11 351103H110609 4011666904300 Vessel BH-HZ 3000-16 351103H110610 4011666906786 Module MAS-Tank 253101H111310 4011666802965 Vessel BH-HZ 1000-11 351103H112017 4011666903013 Compressor UNM STH 650-10-180 151104H112022 4011666903068 Compressor UNM STH 650/650-10-500 151104H113011 4011666903280 Compressor ZPM STS 750-15 151126H114006 4011666903464 Compressor SEM STS 850-10 151116H300060 4011666805188 Compressor Medic Air MA 150-25 W-Silent 151131H300062 4011666805201 Compressor Medic Air MA 300-50 W-Silent 151131H300064 4011666805225 Compressor Medic Air MA 600-90 D-Silent 151131H411410 4011666912510 Compressor AM 11-10 F2 VS 152119H411415 4011666912527 Compressor AM 15-10 F2 VS 152119H411420 4011666912534 Compressor AM 2-10 152118H411425 4011666912541 Compressor AM 3-10 152118H411808 4011666926678 Compressor AM11-8 E1 152111H411810 4011666926661 Compressor AM11-10 E1 152111H411813 4011666926654 Compressor AM11-13 E1 152111H411908 4011666926647 Compressor AM15-8 E1 152111H411910 4011666926630 Compressor AM15-10 E1 152111H411913 4011666926623 Compressor AM15-13 E1 152111H415460 4011666928597 Compressor AM4-10 E1 152101H415461 4011666928603 Compressor AM4-10 E1 270 152102H415462 4011666928610 Compressor AM4-10 E1 270 DK 600 152103H415463 4011666928627 Compressor AM4-10 E1 180 152104H415464 4011666928634 Compressor AM4-10 E1 180 DK 600 152105H415560 4011666928542 Compressor AM5-10 E1 152101
Product informationArt. no. EAN code Type Product group
270Ap
pe
nd
ix
H415561 4011666928559 Compressor AM5-10 E1 270 152102H415562 4011666928566 Compressor AM5-10 E1 270 DK 600 152103H415563 4011666928573 Compressor AM5-10 E1 180 152104H415564 4011666928580 Compressor AM5-10 E1 180 DK 600 152105H415570 4011666000408 Compressor AM5-8 E1 152101H415580 4011666000415 Compressor AM5-13 E1 152101H415660 4011666928481 Compressor AM7-10 E1 152101H415661 4011666928498 Compressor AM7-10 E1 270 152102H415662 4011666928504 Compressor AM7-10 E1 270 DK 985 152103H415663 4011666928511 Compressor AM7-10 E1 180 152104H415664 4011666928528 Compressor AM7-10 E1 180 DK 985 152105H417518 4011666924766 Compressor AirMaster AM 18-8 152122H417520 4011666924773 Compressor AirMaster AM 18-10 152122H417523 4011666924780 Compressor AirMaster AM 18-13 152122H417618 4011666924735 Compressor AirMaster AM 22-8 152122H417620 4011666924742 Compressor AirMaster AM 22-10 152122H417623 4011666924759 Compressor AirMaster AM 22-13 152122H601001 4011666912886 Oil-water separator OWS-ÖWAMAT 10 155201H601002 4011666912893 Oil-water separator OWS-ÖWAMAT 11 155201H601003 4011666912909 Oil-water separator OWS-ÖWAMAT 12 155201H601004 4011666912916 Oil-water separator OWS-ÖWAMAT 14 155201H604012 4011666803825 Adsorption dryer DRY-DAT 120 154211H604023 4011666803832 Adsorption dryer DRY-DAT 230 154211H604035 4011666803849 Adsorption dryer DRY-DAT 350 154211H604058 4011666803856 Adsorption dryer DRY-DAT 580 154211H604085 4011666803863 Adsorption dryer DRY-DAT 850 154211H604120 4011666803870 Adsorption dryer DRY-DAT 1200 154211H604140 4011666803887 Adsorption dryer DRY-DAT 1400 154211H607147 4011666805010 Cold dryer DK 14700 PT 154202H611000 4011666906779 Module MAS-Dryer 253101H612075 4011666919472 Cold dryer DK 600 ECO 154203H612105 4011666919380 Cold dryer DK 10000 ECO 154203H612114 4011666919465 Cold dryer DK 985 ECO 154203H612162 4011666919458 Cold dryer DK 1500 ECO 154203H612222 4011666919427 Cold dryer DK 2200 ECO 154203H612360 4011666919434 Cold dryer DK 3500 ECO 154203H612540 4011666919403 Cold dryer DK 5000 ECO 154203H612720 4011666919410 Cold dryer DK 7100 ECO 154203H811000 4011666929334 Compressor UNM STS 660-10-90 151150H811100 4011666000255 Compressor UNM STS 660-10-90 XS 151150H812000 4011666929341 Compressor UNM STS 660-10-270 151150H812010 4011666929358 Compressor UNM STS 660-10-270 XDK 151150H812100 4011666000262 Compressor UNM STS 660-10-270 XS 151150H812110 4011666000279 Compressor UNM STS 660-10-270 XSDK 151150H813000 4011666929365 Compressor UNM STS 660-10-500 151150H813010 4011666929372 Compressor UNM STS 660-10-500 XDK 151150H813100 4011666000286 Compressor UNM STS 660-10-500 XS 151150H813110 4011666000293 Compressor UNM STS 660-10-500 XSDK 151150H814000 4011666929327 Compressor UNM STB 660-10-10 151140H814100 4011666000163 Compressor UNM STB 660-10-10 XS 151140H815000 4011666929389 Compressor UNM STL 660-10-270 151160H815100 4011666000194 Compressor UNM STL 660-10-270 XS 151160H816000 4011666929396 Compressor UNM STL 660-10-500 151160H816100 4011666000200 Compressor UNM STL 660-10-500 XS 151160H822000 4011666929419 Compressor UNM STS 580-15-270 151150H822010 4011666929426 Compressor UNM STS 580-15-270 XDK 151150H822100 4011666000217 Compressor UNM STS 580-15-270 XS 151150H822110 4011666000224 Compressor UNM STS 580-15-270 XSDK 151150H823000 4011666929433 Compressor UNM STS 580-15-500 151150H823010 4011666929440 Compressor UNM STS 580-15-500 XDK 151150H823100 4011666000231 Compressor UNM STS 580-15-500 XS 151150H823110 4011666000248 Compressor UNM STS 580-15-500 XSDK 151150H824000 4011666929402 Compressor UNM STB 580-15-10 151140H824100 4011666000156 Compressor UNM STB 580-15-10 XS 151140H825000 4011666929457 Compressor UNM STL 580-15-270 151160H825100 4011666000170 Compressor UNM STL 580-15-270 XS 151160H826000 4011666929464 Compressor UNM STL 580-15-500 151160H826100 4011666000187 Compressor UNM STL 580-15-500 XS 151160H831000 4011666929488 Compressor UNM STS 1000-10-90 151150H832000 4011666929495 Compressor UNM STS 1000-10-270 151150H832010 4011666929501 Compressor UNM STS 1000-10-270 XDK 151150H833000 4011666929518 Compressor UNM STS 1000-10-500 151150H833010 4011666929525 Compressor UNM STS 1000-10-500 XDK 151150H834000 4011666929471 Compressor UNM STB 1000-10-10 151140H835000 4011666929532 Compressor UNM STL 1000-10-270 151160H836000 4011666929549 Compressor UNM STL 1000-10-500 151160
Product informationArt. no. EAN code Type Product group
271 Ap
pe
nd
ix
H842000 4011666929563 Compressor UNM STS 780-15-270 151150H842010 4011666929570 Compressor UNM STS 780-15-270 XDK 151150H843000 4011666929587 Compressor UNM STS 780-15-500 151150H843010 4011666929594 Compressor UNM STS 780-15-500 XDK 151150H844000 4011666929556 Compressor UNM STB 780-15-10 151140H845000 4011666929600 Compressor UNM STL 780-15-270 151160H846000 4011666929617 Compressor UNM STL 780-15-500 151160H851000 4011666000637 Compressor UNM STS 1250-10-90 151150H852000 4011666000651 Compressor UNM STS 1250-10-270 151150H852010 4011666000644 Compressor UNM STS 1250-10-270 XDK 151150H853000 4011666000682 Compressor UNM STS 1250-10-500 151150H853010 4011666000668 Compressor UNM STS 1250-10-500 XDK 151150H854000 4011666000545 Compressor UNM STB 1250-10-10 151140H855000 4011666000576 Compressor UNM STL 1250-10-270 151160H856000 4011666000583 Compressor UNM STL 1250-10-500 151160H862000 4011666000606 Compressor UNM STS 1000-15-270 151150H862010 4011666000590 Compressor UNM STS 1000-15-270 XDK 151150H863000 4011666000620 Compressor UNM STS 1000-15-500 151150H863010 4011666000613 Compressor UNM STS 1000-15-500 XDK 151150H864000 4011666000538 Compressor UNM STB 1000-15-10 151140H865000 4011666000552 Compressor UNM STL 1000-15-270 151160H866000 4011666000569 Compressor UNM STL 1000-15-500 151160
Product informationArt. no. EAN code Type Product group
272Ap
pe
nd
ix
273
Index
Compressors, mobile 15 bar 27–30
Compressors, mobile, sound-insulated 31–33/53–54
Compressors, oil-free 22/28–29/32/54
Compressors, petrol-driven 34–35
Compressors, stationary 42–61
Compressors, stationary 15 bar 43–50,52
Compressors, stationary, sound-insulated 44–52
Condensate collection pipe 86
Condensate drain valves 71/128
Connecting hoses 144–149
Connectors, V 4 A 109
Correction factors/Design data
– for adsorption dryers 77
– for cold dryers 77
– for filters 77
– for pipe systems 100–103
Cross pieces 164
AD
Dead-end distribution blocks 115–116/118–119
Deburring tools 112/137/142
Design data/Correction factors
– for adsorption dryers 77/84–85
– for cold dryers 77
– for filters 77
– for pipe systems 100–103
Diaphragm pressure switches 72
Differential pressure manometer 90
Dirt arrester 71
Distributors with/without quick-release couplings 154
Double nipple 90/128/141/160/161
Drills 190–191
E
Ecomat condensate dischargers 86
Ecomat condensate dischargers 86
Energy-saving system 67/68/108/136/141
F
Filter pressure reducers 92
Filter unit 93–95
Filters 89–90
Fox quick plug-in connections 168–170
Funnel spray gun 221
G
Grease guns 198
Grinding machines 192–194
H
High-pressure hoses 146
Hose break safety fitting 146
Hose clamps 159
Hose nozzles 159
Hose rewinder 38/148–149
Hoses 144–149
10
10+Master compressors, stationary 52
A
Accessories “Generating compressed air” 62–73
Activated carbon filters 90/95
Adsorption dryers 84–85
Air connection blocks 117
Air hoses 144–150
Air inlet boxes 117
Air junction boxes 118
Air lubricator 248
Air shut-off cock 108/136/141
AirMaster on tandem vessel 59
AirMaster screw compressors 55–61
Angle axial grinder 193
Angle drill 191
Angle grinder 194
Angle pieces 163
Anti-friction agent 112/137/142
Assembly aids
for pipelines 111–112/128–129/137/142–143
Axial grinder 193
B
Ball valves 70/128
Basic changeover circuits 66–67
Belt grinders 194
Blasting abrasive 229
Blasting devices 226–229
Blind rivet gun 197
Blowing guns 237–241
Brass parts and screw fittings 151–167
Brass screw fitting system 15-28 mm 130–132
Breathing mask 219/248
Bypass lines for cold dryers 82/83
C
Car body saw 195
Car window cutting tool 196
Cartridge guns 234–236
Changing cup system 216
Check valves 71
Chisel hammers 202–204
Chisels 204
Cold compressed air dryers 82/83
CompactMaster compressors 27–30
Compressed air pipe systems 98–143
Compressed air pipes 106/109/131/134/139
Compressed air purification 78–79
Compressed air quality classes 76–88
Compressed air tool air requirements 144–150
Compressed air tools 172–229
Compressed air vessels 63–65
Compressor as tandem system 51
Compressors on tandem vessel 51
Compressors, mobile 18–38
Ap
pe
nd
ix
274
Index
Pipes 106/109/131/134/139
Plaster spraying devices 221–222
Plug connectors 106–107/128/168–170
Plug nipple 153/155–158/248
Plug nipple, rotary 248
Polyamide hose 146–147
Polyethylene hose 146
Polyurethane hose 147
Pouch gun 236
Power and air supply units 150
Prefilters 89
Pressure blasting device 229
Pressure controllers 248
Pressure gauges 69
Pressure reducers 92–93
Pressure spray gun 229
Pressure switches 72
Protective spray hood 229
Purifying compressed air 76–79
Q
Quick-release couplings 128/152–154/157–158
R
Ratchet screwdriver 186–187
Reducing nipple 161–162
Reduction fittings 135/141/161
Riveting tongs 197
Rotary screwdriver 188–189
Rubber vibration elements 68
S
Safety quick-release couplings 128
Safety valves 70–71
Screw clamps 159
Screw compressors 56–61
Screw fitting, A series 165–167
Screw fittings and brass parts 151–167
Sealing tape 129/142
Sets of instruments 65
Silencer 71–72
SilentMaster compressors, mobile 31–32
SilentMaster compressors, stationary 44/46/48/50/52
Sleeves 162
Socket spanner 185/187
Sound absorbing cover 50
Sound-insulated compressors, mobile 33
Sound-insulated compressors,
stationary 44/46/48/50/52
Spare filter elements 89–90
Spare hoods for pressure switches 73
Special cutter for car windows 196
Special gun 225
Spiral hoses 147
Spray boy 233
Spray guns 228–229
Spray lance 224
I
Impact screwdriver 180–185
K
Keyless chuck 191
L
Leak detector spray 129
Load relieving valves 72
Locking screws 162–163
Lubricants/oil 65–248
M
Maintenance units 88–94
MAS 36–39
Material pressure hoses 233
Material pressure plate for spray boy 233
Material pressure vessels 230–232
Medic-Air compressors 54
Microfilters 89
Mini coupling system 156
Mist oiler 96
Mobile compressed air system 36–39
Mobile compressors 18–35
Multi-purpose gun UHW 2000 225
Multi-purpose material hoses 233
Multi-purpose nail drivers 208
N
Needle descaler 200–201
O
Oil extracting device 199
Oil monitoring device 52
Oil/air hoses 145
Oil/lubricants 65/185/248
Oil-free compressors 28–29/32/53–54
Operating hours counter 67
Öwamat oil-water separator 87
P
Paint boy 123–127
Paint pressure vessels xx–xx
Paint spray guns 211–219
Paint spray guns 211–219
Pan-head nailer 208
PetrolMaster compressors 34–35
Pipe clips 111–143
Pipe cutters 112/137/147
Pipe system stickers 112/137
Pipe system:
– Pipe system, brass 15-28 mm 130–132
– Pipe system, brass 32-63 mm 133–137
– Pipe system, plastic 32-63 mm 138–143
– Plug-in system 15-28 mm 106–112
– Plug-in system 15-28 mm Midi 115–116
Pipeline diameter 102
Ap
pe
nd
ix
275
Index
Spray pipe 221
Spring balancer 149
Stainless steel plug connectors 109
Staplers and nail guns 205–210
Star-delta switch 66
Start reliefs 66
Stationary compressors 41–52
Super-Flex hoses 145
Supply units 150
Systainer 176–179
T
Tandem system 51
Tandem vessel 51
Testing your compressed air station 40
Thread locking fluid 129
T-pieces 163–164
Tyre pressure gauges 244–247
U
UniMaster as tandem system 51
UniMaster compressors, mobile 18–26
UniMaster compressors, stationary 41–43
UniMaster on tandem vessel 51
V
V 4 A plug connectors 109
Vessel accessories 66
Vessel guidelines 40
Vessels 230–233
Viscosity measuring cup 219
W
Wall bracket for impact screwdrivers 184
Wall-mounted hose holder 146
Water collector 108
Water separator with filter 92
Y
Y-pieces 164
Ap
pe
nd
ix
276
Our overseas branches in the following countries will be glad to help you.
NetherlandsTooltechnic Systems BVCoenecoop 7152741 PW WaddinxveenPhone: +31 182 62 19 40Fax: +31 182 62 19 49E-mail: [email protected]
AustriaTooltechnic Systems Ges.m.b.H.Lützowgasse 141140 ViennaPhone: +49 (0)7121 95 92 22Fax: +49 7121 95 91 51E-mail: [email protected]
PolandTooltechnic Systems Polska Sp. z o. o.ul. Mszczonowska 7Janki K.Warszawy05-090 RaszynPhone: +48 22 71 14 161Fax: +48 22 72 01 101E-mail: [email protected]
RussiaOOO TTS Tooltechnic SystemsMoskovskaya OblastTerritoriya “Noginsk Technopark”, dom 13142400 Rayon Noginsk, Noginsk Phone: +7 495 7 21 95 85Fax: +7 495 3 61 22 09E-mail: [email protected]
SwitzerlandTooltechnic Systems (Schweiz) AGMoosmattstr. 248953 DietikonPhone: +41 44 7 44 27 27Fax: +41 44 7 44 27 28E-mail: [email protected]
SlovakiaSchneider Slovensko spol. s r.o.Novozámocká 16594905 NitraPhone: +421 37 65 22 77 56Fax: +421 37 7 41 50 30E-mail: [email protected]
Spain/PortugalTooltechnic Systems S.L.U.Paseo de la Zona Franca, 69-7308038 BarcelonaPhone: +34 93 2 64 30 30Fax: +34 93 2 64 30 31E-mail: [email protected]
Czech RepublicSchneider Bohemia spol. s r.o.Sulkov 55533021 LíněPhone: +420 377 91 13 14Fax: +420 377 91 10 05E-mail: [email protected]
HungaryTooltechnic System Kft.Gyömrői út 150. V-3 épület1103 BudapestPhone: +36 (0)12 97 13 50Fax: +36 (0)12 97 13 59E-mail: [email protected]
Importers
AlgeriaPro’ DistributeurBP. 61F Echangeur Boufarik Nord09400 W. BlidaPhone: +213 25 47 12 94Fax: +213 25 47 64 07E-mail: [email protected]
Bosnia-HerzegovinaAX Soling d.o.o.Dragicina b.b.88347 Ruzici GrudePhone: +387 39 66 01 30Fax: +387 39 66 30 12E-mail: [email protected]
BulgariaSpesima Engineering Ltd.Assen Yordanov Blvd. 91592 SofiaPhone: +359 2 9 73 11 48Fax: +359 2 9 73 11 84E-mail: [email protected]
GeorgiaLTD “ELECTRON”Mitskevich Str. 270160 TbilisiPhone: +995 32 37 72 22Fax: +995 32 37 74 44E-mail: [email protected]
IcelandSkúlason & Jónsson ehf.Skútuvogur 6124 ReykjavíkPhone: +354 5 68 65 44Fax: +354 5 53 05 43E-mail: [email protected]
KazakhstanKural M. LimitedLebedeva Str. 3a050060 AlmatyPhone: +7 327 2 70 12 23Fax: +7 327 2 70 12 27E-mail: [email protected] www.titool.kz
CroatiaTE-LACK d.o.o.Baranjska 3, Gradici10410 Velika GoricaPhone: +315 (0)16 22 20 79Fax: +315 (0)16 25 62 88E-mail: [email protected]
LatviaJUMA Ltd.Maskavas str. 452 1063 RigaPhone: +371 (0)67 18 71 17Fax: +371 (0)67 18 71 55E-mail: [email protected]
LithuaniaUAB “Mage”Kretingos g. 992218 KlaipedaPhone: +370 46 35 02 03Fax: +370 46 35 02 04E-mail: [email protected]
LuxemburgMaison J. Charles Printz S.A.2, Rue Henri Schnadt2530 LuxembourgPhone: +352 (0)40 41 31Fax: +352 (0)40 41 35E-mail: [email protected] www.printz.lu
RomaniaNovatech S.R.L.Drumul Odaii 26A075100 OtopeniPhone: +40 21 3 50 43 01Fax: +40 21 3 50 43 04E-mail: [email protected]
SloveniaArbona d.o.o. LjubljanaCelovska Cesta 462A1210 Ljubljana-SentvidPhone: +386 1 5 11 60 36Fax: +386 1 5 16 13 78Mobile: +386 4 1 63 46 06E-mail: [email protected]
SyriaI.T.C. Itcan Tool CenterP.O. Box 12521DamascusPhone: +963 11 6 22 20 77Fax: +963 11 6 25 97 122E-mail: [email protected]
BelarusSI-Alphtec Industries Ltd.ul. Knorina, 50 A220103 MinskPhone: +375 17 2 81 13 90Fax: +375 17 2 81 14 11E-mail: alphte
Subsidiaries
Ap
pe
nd
ix
277
Notes
Ap
pe
nd
ix
278
NotesA
pp
en
dix
279
Notes
Ap
pe
nd
ix
280
NotesA
pp
en
dix
281
Notes
Ap
pe
nd
ix
282
NotesA
pp
en
dix
283
Notes
Ap
pe
nd
ix
284
NotesA
pp
en
dix
285
Notes
Ap
pe
nd
ix
286
NotesA
pp
en
dix
287
Notes
Ap
pe
nd
ix
288
NotesA
pp
en
dix
289
Notes
Ap
pe
nd
ix
290
NotesA
pp
en
dix
The contents of this catalogue were correct at the time of going to print (04/2011). Technical details and equipment versions may deviate from the descriptions. We therefore reserve the right to change the published data.
Ap
pe
nd
ix