Schlosser-Pfeiffer Mischer englisch

8
SM Series Compulsory Mixers

description

Compulsory concrete mixerSeparated drives for perfect mixing results in no timeMixers of the SM series are the perfect solution for manufacturing concrete for paving stones and border stones, hollow blocks and plates, or for pipes and manholes. Thanks to their high mixing intensity, planetary compulsory mixers are particularly ideal for concrete types with a low water-cement value, for earth-moist concrete. SCHLOSSER-PFEIFFER mixers are used successfully by companies all over the world. They are characterised by very long service life, high reliability, excellent mixing performance and minimum maintenance need.

Transcript of Schlosser-Pfeiffer Mischer englisch

Page 1: Schlosser-Pfeiffer Mischer englisch

SM Series Compulsory Mixers

Betonmischer_8Seiter, D, R.indd 2 16.04.2007 09:33:32

Page 2: Schlosser-Pfeiffer Mischer englisch

SM Series Compulsory Mixers

Separated drives for perfect mixing results in no time

Mixers of the SM series are the perfect solution for manufacturing concrete for paving stones and bor-der stones, hollow blocks and plates, or for pipes and manholes. Thanks to their high mixing inten-sity, planetary compulsory mixers are particularly ideal for concrete types with a low water-cement value, for earth-moist concrete.

SCHLOSSER-PFEIFFER mixers are used successfully by companies all over the world. They are characterised by very long service life, high reliability, excellent mixing per-formance and minimum maintenance need.

SM series mixers for simply better mixing results

According to ISO 18650 definitions, mixing results with a variation coefficient of less than 7.5% are considered good. The faster a low coefficient is achieved, the better the mixer. And SM series mixers achieve a coefficient of 1%! Even at very short mixing intervals!

Concrete mixer SM series by SCHLOSSER-PFEIFFER

Betonmischer_8Seiter, D, R.indd 3 16.04.2007 09:33:37

Page 3: Schlosser-Pfeiffer Mischer englisch

SM series mixing diagram. Fast elliptical rotary movements produce homogeneous mixtures

All motors are installed outside of the mixing chamber for protection and easy access. High drive reserves and the separated drives make it possible to stop and restart the mixer at any time during production.

Separate, clean drives

The central drive actuates the tool carrier plate via the gear system. Depending on mixer size, the gear system is actuated by one or two main drives. The rotating tool carrier plate carries the eccentrically mounted stone drives containing the mixing tools.

Betonmischer_8Seiter, D, R.indd 4 16.04.2007 09:33:51

Page 4: Schlosser-Pfeiffer Mischer englisch

SM Series Compulsory Mixers

Special features:

1 The SM mixer is equipped with a central drive plus additional separate drives for the planets.2 The mixer’s most unique feature are its fast-rotating, eccentrically mounted mixing tools. The elliptical rotary movements of this unique mixing system force any mixture into a homogenous unit.

Other advantages of the SM series:

3 Easy handling4 Low maintenance need5 Low current consumption, low operating costs6 Excellent mixing results despite short mixing times7 Perfect mixing of colour additives8 Homogenisation of even the smallest components9 Effortless restart of the mixer even after standstills10 Easy cleaning thanks to large segment doors11 Discharge accelerator for even faster discharging

Betonmischer_8Seiter, D, R.indd 5 16.04.2007 09:33:56

Page 5: Schlosser-Pfeiffer Mischer englisch

Adjustable mixing blades

The mixing arms are height-adjustable. They are individu-ally adjusted for every application and are made of special materials. The level of precision used for fine-tuning and adjusting the tools translates directly into better mixing results, reduces wear and tear, and protects the drives from impact stress.

Large segmental doors

For cleaning and maintenance, the mixer wall is equipped with either one or two swivelling segmental doors, depending on mixer size. These doors are generously dimensioned and protected by limit switches. They pro-vide a large opening all the way to the floor, for easier cleaning access.

Wearing protection lining

Upon request the mixer will be equipped with a replace-able wearing-protection lining made of chilled casting tiles or welded-on composite boards or a similar mate-rial. The material used for the wearing-protection lining depends on the texture of the concrete processed.

Discharge

The mixer of the SM series can be provided with up to 3 separate discharge openings. A discharge accelerator is also available to reduce the discharge time by up to 50%.

Concrete and more

SM series mixers are the perfect choice for processing a wide range of different concrete types containing a large variety of aggregates, colour pigments, and materials of any kind. In addition, SM mixers are also ideal for mixing other materials such as e.g. ceramics, clay, lime sand brick, slag and flue dusts.

Control

SM mixers come standard-equipped with a fully auto-matic control system. This PC aided control system is responsible for batching the various individual compo-nents and creating the desired mixture. Upon request the control system is available with a visualisation, statistics programs, printer, remote maintenance, etc.

Betonmischer_8Seiter, D, R.indd 6 16.04.2007 09:34:03

Page 6: Schlosser-Pfeiffer Mischer englisch

SM Series Compulsory Mixers

Type: Planetary compulsory mixer

SM SM SM SM SM SM SM SM 500/375 750/500 1125/750 1500/1000 1875/1250 2250/1500 3000/2000 3750/2500

Dry filling I 500 750 1125 1500 1875 2250 3000 3750

Max. filling weight kg 1200 1200 1800 2400 3000 3600 4800 6000

m3 0,375 0,5 0,75 1 1,25 1,5 2 2,5

Main drive kW 11 11 15 15 22 22 2x22 2x30

No. of 4-armed mixing stars units 1 1 2 2 2 2 3 3

Drive per star kW 11 11 11 11 11 11 11 11

Discharge accelerator drive kW 1,5 1,5 3 3 4 4 4 4

Skip hoist drive (optional) kW 10/10 10/10 14/12 14/12 20/18 20/18 20/18 30/30

High-speed agitator (optional) kW 7,5 7,5 7,5 7,5 7,5 7,5 7,5 7,5

Discharge accelerator (optional) kW -- --- 0,7 0,7 0,7 0,7 0,7 0,55

No. of segmental doors * units 1 1 1 1 1 1 2 2

Dead weight, approx. ** to 5,8 9,8 8,8 8,8 10,5 10,5 16 16

Dimensions (approx.)

A = Overall length mm 3050 3050 4300 4300 4600 4600 5300 5300

B = Mixing pan diameter mm 1870 1870 2470 2470 3000 3000 3700 3700

C = Overall height mm 3190 3190 3375 3375 3700 3700 3725 3725

D = Frame height mm 2210 2210 2295 2295 2420 2420 2500 2500

*1 = single-leaf door, 2 = double-leaf door **Basic equipment Right of technical modifications reserved

Technical data of the SM series:

Vibrated-concrete volume per batch

Betonmischer_8Seiter, D, R.indd 7 16.04.2007 09:34:58

Page 7: Schlosser-Pfeiffer Mischer englisch

D

C

B

A

Development - Design & Engineering - Manufacture

Our machines are developed and designed using state-of-the-art 3D CAD/CAE systems. The materials and com-ponents used in the manufacture of our machines and plants are selected to meet the strictest quality require-ments and are quality-checked on a regular basis by in-house quality audits.

Our machine components are manufactured from certi-fied steel qualities, using CNC welding, milling and drill-ing technologies. The resulting machines and plants are characterised by low manufacturing tolerances and a correspondingly high quality standard.

Betonmischer_8Seiter, D, R.indd 8 16.04.2007 09:35:36

Page 8: Schlosser-Pfeiffer Mischer englisch

SCHLOSSER-PFEIFFER GmbHScheidertalstrasse, Tor 4D-65326 Aarbergen

Telephone: +49 (0) 6120 282901Fax: +49 (0) 6120 282931E-Mail: [email protected]: www.schlosser-pfeiffer.com

We put concrete into shape

MIS

CH

_040

7_E1

Betonmischer_8Seiter, D, R.indd 1 16.04.2007 09:33:20