SCE PUC S CAMCA - Pacific Warehouse Sales...CAMCA Pacific Warehouse Sales is a master distributor...
4
SOCKET PRODUCTS BY CAMCAR ® Pacific Warehouse Sales is a master distributor for Stanley Engineered Fastening, the manufacturer of Camcar brand sockets. Made in the USA, Camcar sockets give you the quality and design you would expect from a domestic manufacturer. PWS carries a full line of socket products in packaged quantities. PWS, our word is how we do business. Socket Head Shoulder Screws Materials • Heat Treated Alloy Steel • 300 Series Stainless Steel Sizes • 1/4” thru 1” • Up to 8” Length Thread Type • Coarse • Fine Material • Heat Treated Alloy Steel Drives Sizes • #0 thru 2” • M3 thru M20 • Up to 14” Length Thread Type • Coarse • Fine • Heat Treated Alloy Steel Drives • Hex • TORX Plus ® Button Head Socket Cap Screws Material Sizes • #2 thru 5/8” • M3 thru M12 • Up to 4” Length Thread Type • Coarse • Fine • Heat Treated Alloy Steel • Hex • TORX Plus ® Flanged Button Head Socket Cap Screws Material Sizes • #8 thru 3/8” Thread Type • Coarse • Fine - #10 only • Heat Treated Alloy Steel Drives • Hex • TORX Plus ® • #2 thru 1” • M3 thru M12 Thread Type • Coarse • Fine Drive • Hex Flat Countersunk Socket Head Cap Screws Material Sizes Drive • Hex Socket Head Cap Screws DFAR Compliant DFAR Compliant DFAR Compliant DFAR Compliant DFAR Compliant
Transcript of SCE PUC S CAMCA - Pacific Warehouse Sales...CAMCA Pacific Warehouse Sales is a master distributor...
SOCKET PRODUCTS BY CAMCAR®
Pacific Warehouse Sales is a master distributor for Stanley Engineered Fastening, the manufacturer of Camcar brand sockets. Made in the USA, Camcar sockets give you the quality and design you would expect from a domestic manufacturer. PWS carries
a full line of socket products in packaged quantities. PWS, our word is how we do business.
Socket Head Shoulder ScrewsMaterials• Heat Treated Alloy Steel• 300 Series Stainless Steel
Sizes• 1/4” thru 1”• Up to 8” Length
Thread Type• Coarse• Fine
Material• Heat Treated Alloy Steel
Drives
Sizes• #0 thru 2”• M3 thru M20• Up to 14” Length
Thread Type• Coarse• Fine
• Heat Treated Alloy Steel
Drives
• Hex• TORX Plus®
Button Head Socket Cap Screws Material Sizes
• #2 thru 5/8”• M3 thru M12• Up to 4” Length
Thread Type• Coarse• Fine
• Heat Treated Alloy Steel
• Hex• TORX Plus®
Flanged Button Head Socket Cap Screws Material Sizes
• #8 thru 3/8”
Thread Type• Coarse• Fine - #10 only
• Heat Treated Alloy Steel
Drives• Hex• TORX Plus®
• #2 thru 1”• M3 thru M12
Thread Type• Coarse• Fine
Drive• Hex
Flat Countersunk Socket Head Cap Screws Material Sizes
Drive• Hex
Socket Head Cap Screws
DFAR Compliant
DFAR Compliant
DFAR Compliant
DFAR Compliant
DFAR Compliant
SOCKET PRODUCTS BY CAMCAR®
Material• Heat Treated Alloy Steel
Drives
Material Material• Heat Treated Alloy Steel
Sizes• #2 thru 1-1/2”
Thread Type• Coarse• Fine
Sizes• #6 thru 3/4”
Thread Type• Coarse• Fine
Sizes• #8 thru 1/2”
Thread Type• Coarse• Fine
• #4 thru 1/4”
Thread Type• Coarse
• #4 thru 1/2”
Thread Type• Coarse• Fine
• Heat Treated Alloy Steel
Thread Type• Coarse• Fine
Material• Heat Treated Alloy Steel
DFAR Compliant
Sizes• #6 thru 1/2”
Thread Type• Coarse• Fine
Socket Set Screws - Cone Point Socket Set Screws - Knurled Cup Point
Socket Set Screws - Cup PointSocket Low Head Cap Screws
Drive• Hex
• Heat Treated Alloy Steel
Socket Set Screws - Oval Point Material Sizes
Drive• Hex
• Heat Treated Alloy Steel
Socket Set Screw - Flat Point Material Sizes
Drive• Hex
• Hex• TORX Plus®
Socket Set Screws - Half Dog Point Material
Drive• Hex
• Heat Treated Alloy Steel
DFAR Compliant
Drive• Hex
Drive• Hex
• Heat Treated Alloy Steel
Hardened Ground Machine Dowel Pins Sizes
Standard Size• .0002 over nominal diameter
DFAR Compliant
DFAR CompliantDFAR Compliant
DFAR Compliant DFAR Compliant
Sizes• #8 thru 1/2”
• #1/16" thru 1”
DFAR Compliant
Material
SOCKET PRODUCTS BY CAMCAR®
Dryseal Type Pressure Plugs 3/4” NPTMaterial• Heat Treated Alloy Steel
Sizes• 1/16” thru 2”
Thread Type• Coarse• Fine
Flush Type Pressure Plugs 7/8” NPTMaterial• Heat Treated Alloy Steel
Sizes• 1/16” thru 1-1/4”
Thread Type• Coarse• Fine
Short Arm Hex KeysMaterial• Heat Treated Alloy Steel
Sizes• 1/16” thru 1”• 1.5mm thru 19mm
Long Arm Hex KeysMaterial• Heat Treated Alloy Steel
Sizes• 1/16 thru 1” Inch• 1.5mm thru 12mm Metric
TORX® Short Arm Hex KeysMaterial• Heat Treated Alloy Steel
TORX Sizes• T-7 thru T-30
TORX PLUS® Short Arm Hex KeysMaterial• Heat Treated Alloy Steel
Sizes• 10IP thru 50IP
SOCKET PRODUCTS BY CAMCAR®
TORX PLUS® Power Bits (1/4” Shank)Sizes• 6IP thru 30IP
Hex Shank• 1/4”
TORXalign® Bits (Insert Bits)Sizes• T-6 thru T-30
Hex Shank• 1/4”
Tamper-Resistant TORX® Insert BitsSizes• T-8 thru T-40
TORX PLUS® Insert BitsSizes• 1IP thru 80IP
Hex Shank• 1/4” thru 7/8”
TORX PLUS® Tamper-Resistant Insert BitsSizes• 10IPR thru 40IPR
Hex Shank• 1/4”
TORX® Insert BitsSizes• T-1 thru T-100
Hex Shank• 1/4” thru 7/8”
