SCE Guide Trainer Packages SCE Guide Trainer Packages
Transcript of SCE Guide Trainer Packages SCE Guide Trainer Packages
SCE Guide Trainer PackagesSiemens Automation Cooperates with Education (SCE)
SCE Guide Trainer Packages
Restricted / © Siemens AG 2014. All Rights Reserved. siemens.it/sce
Siemens Automation Cooperates with Education (SCE)
The Siemens SCE program offers a system for sustainable educational support which is unique worldwide.
As a technology leader, we support educational and R&D institutions with our excellent industrial know-how and a specific range of services. We support secondary and tertiary education, as well as initial non commercial training departments inrange of services. We support secondary and tertiary education, as well as initial non commercial training departments in the field of automation and drive technology.
Through cooperative partnerships, we help educators to plan their classes in a targeted, practice-oriented manner and in compliance with the curriculum.
Overview of SCE services• SCE Curriculums for classes
• SCE Trainer Packages for practice oriented education• SCE Trainer Packages for practice-oriented education
• SCE Courses for providing up-to-date technical knowledge
• SCE Support for your projects/technical books
• Complete Didactic Solutions from our partners
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 2 Industry Sector
• SCE Contact Partner for individual support SCE homepage siemens.it/sce
Overview / List / Graphic / Cabinet
SCE Trainer Packages for Trainers and Educators
SCE Trainer Packages are specially compiled hardware and software packages at special prices for up-to-date educational content in automation and drive technology.
> 80 Trainer Packages for practice-oriented education• Innovative hardware/software components incl. complete accessories
• Completely and functionally coordinated with one another in terms of content
Low cost original industrial components for classes• Low-cost original industrial components for classes
• Perfectly coordinated with SCE teaching material and aligned withteaching curriculums/content
• Innovative trends taken into account
SCE Trainer Packages siemens.it/sce
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 3 Industry SectorOverview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Why do we provide SCE Trainer Packages?
Assembling individual products requires a lot of know-how and is time-consuming. We therefore mapped the relevant configurations from practical educational use in SCE packages for you.
Who are these Trainer Packages for?• For research, development and educational institutes
• For partners such as didactic OEM companies which integrate these SCE Trainer Packages into a didactic solutionSCE Trainer Packages into a didactic solution.
• For industrial and corporate initial training – with the exception of three STEP 7 Trainer Packages (see page 128).
What sho ld be considered hen sing Trainer Packages?What should be considered when using Trainer Packages? The products listed may be subject to European/German and/or
US export regulations.
The notes on the Trainer Packages must also be observed.
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 4 Industry Sector
gTo the notes Here
Overview / List / Graphic / Cabinet
Trainer Packages – OverviewNEW
SIMATIC Software STEP 7• Overview STEP 7 and SIMATIC HMI• Single-user license V13• 12-Classroom license V13• 12-Classroom upgrade-license V13
SIMATIC PLCs and Peripheries• S7-1513 PN / S7-1516 PN/DP• S7-1516F PN/DP• S7-314C-2PN/DP / S7-314C-2PN/DP (Upgrade)• S7-315F-2PN/DP
HMI (Human Machine Interface)• Overview STEP 7 and HMI• WinCC Advanced V13 / WinCC flexible 2008• WinCC Advanced V13 / WinCC flexible 2008 • Software for students
NEW
******
**pg
• Software for students V13• PID Control with SIMATIC standard• PID Control with SIMATIC modular • CFC 12-Classroom license• CFC Software for students • IE Softnet 12-Classroom license
• S7-300 Safety I/O• ET 200S PLC IM151-8 F PN/DP • ET 200S PN• ET 200S Safety I/O• S7-315T Technology• SIMATIC Embedded PLC• Soft-SPS WinAC F RTX 2010
• SIMATIC HMI TP700 /TP1500 COMFORT PANEL• WinCC V7 6er License• Upgrade WinCC V7 6er License• WinCC/Web Navigator V7 6er License• Upgrade WinCC/Web Navigator V7 6er License• WinCC/Web Navigator V7 ASIA 6er
* *
Quick Start into Automation• SIMIT SCE Simulation
Micro Automation• LOGO! 12/24V / LOGO! 230V / USB-Cable
Process Automation• Process control system PCS 7 3er License/Upgrade• Process control system PCS 7 6er License • Process control system PCS 7 AS RTX Box
SIMATIC NET• SINEMA Network Monitoring Software • CP343-1 Advanced• Switch X208• Security Switch• IWLAN• FASTCONNECT Accessories Kit
Drive Technologies• SINAMICS G120 Standard drive• LOGO! 12/24V / LOGO! 230V / USB-Cable
• LOGO! 12/24V / LOGO! 230V (ETHERNET)• Basic Panels KTP400 for LOGO!• S7-1200 PLC• Basic Panels KTP700 for S7-1200• Upgrade STEP 7 V13 Basic for S7-1200 Package
Sensor Technologies• SIMATIC VS120 Vision Sensor• SIMATIC VS130-2 Code Reader
SIMATIC RF 200/300 RFID System
FASTCONNECT Accessories Kit• Development Kit
• SINAMICS G120 Standard drive• SINAMICS S120 Servo drive• SIMOTION D410 add on for S120
Energy Efficiency *
Additional• Industrial Controls• Trainer Packages Purchasing Remarks • Trainer Packages General Regulations**
**
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 5 Industry Sector
• SIMATIC RF 200/300 RFID System• SIWAREX weighing systems
Energy Efficiency *
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/detailsNew / updated Packages Packages in preparation**
SCE List Trainer Packages including Order Number
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 6 Industry SectorOverview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Trainer Packages – GraphicNEW
SIMATIC Software (STEP 7)
ET 200S- CPU- IM 151-3PN
S7-1513 PNS7-1516 PN/DPS7-1516 FPN/DPS7-314C PN/DPS7-315FController
CP343 1Ad
S7-314CS7-300T
SIMATIC EmbeddedControllerWin AC
HMI
WinCC Prof.WinCC Advanced
SIMATIC PLCs/Peripheries
NEW
TP700TP1500
***** *
Process automationSIMATIC PCS 7
- IM 151-3PNPROFINET +CP343-1Adv.Controller ControllerWin AC
PROFINET
• SINEMA• CP343-1 Advanced• Switch X208• Security Switch SIMATIC RF300/200
SIMATIC VS 120Form Check
PROFIBUS
Quickstart into
SIMATIC NET
Micro Automation• LOGO!
S7 1200 PLC
Security Switch• IWLAN• FASTCONNECT Kit• Development Kit
SIMATIC RF300/200 SIMATIC VS130-21D/2D Code Reading
Drive TechnologiesSINAMICS
Qautomation• SIMIT SCE Simulation
Sensor Technologies
Weighing systems SIWAREX
E Effi i
Additional• Industrial Controls
*
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 7 Industry Sector
• S7-1200 PLC• Panels KTP400/700
Energy Efficiency *
Overview / List / Graphic / Cabinet
• Trainer Packages Purchasing Remarks • Trainer Packages General Regulations
TIA Portal siemens.com/tia-portal/detailsNew / updated Packages Packages in preparation**
**
Solution Partner Workshop cabinet with SCE Trainer Packages
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 8 Industry SectorOverview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Energy Efficiency
• Overview
• Basic Information
• Trainer Packages
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 9 Industry SectorOverview / List / Graphic / Cabinet
Training curriculums siemens.com/sce/modules
Energy Efficiency Basic Information
► Quick start into automation
► Engineering Software
► Energy EfficiencyDefinition of Energy Management in the Industry
Energy Management helps companies to continuously and systematically measure, analyze and improve the usage of energy Within this optimizing process Economical technical as well as legal aspects need
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automationthe usage of energy. Within this optimizing process. Economical, technical as well as legal aspects need to be taken into consideration.
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
Energy Services
Services for optimization of the
Energy Management System
Technical System to measure, Energy Efficiency means the
Energy Efficiency
► Additional
► Drive Technologiesp
entire value chain from energy production till the consumer.
y ,analyze, document and visualization of the energy profile as well as monitoring and control of the energy usage in factories and buildings
gy yreduction of energy, without the reduction of the usage of the factory and the equipment.
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 10 Industry Sector
and buildings.
Overview / List / Graphic / Cabinet
Energy Efficiency Trainer Packages Overview
In PreparationIn Preparation
SW Sentron *powermanager
Sentron PAC 4200 * ProfiEnergy*
► Quick start into automation
► Engineering Software
► Energy Efficiency
* PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Sizer *Selection of Energy Efficient Motors
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 11 Industry SectorOverview / List / Graphic / Cabinet
New / updated Packages Packages in preparation**
Engineering Software
• Overview
• Overview STEP 7 and SIMATIC HMI
• Single-user license
• 12-Classroom License
• 12-Classroom upgrade-license
• PID Control with SIMATIC standard
• PID Control with SIMATIC modular
• Software for students
• CFC 12-Classroom License
• CFC Software for students
• IE Softnet 12-Classroom License
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 12 Industry Sector
So t et C ass oo ce se
Overview / List / Graphic / Cabinet
Training curriculums siemens.com/sce/modules
Trainer Packages Overview structure STEP 7 and SIMATIC HMI
SIMATIC Software- STEP 7 as the BasisEngineering tools for STEP 7- S7-PLCSIM Simulation of S7-300-HW
Touch- or Operator-PanelTP700 without buttonsPROFIBUS and PROFINET connection
- S7-SCL similar to Pascal- S7-GRAPH for sequence control with
IEC 61131-3 / DIN 1131-3
SIMATIC HMI software -Human Machine Interface
ETHERNET connection for Engineering Human Machine Interface
WinCC with- Advanced level- Smart Option for Panel / PC- Smart Access
OPC Interface
USB-Adapter PROFIBUS
PROFINET
- OPC-Interface
Software Engineering Tool for STEP 7- SIMATIC CFC- PID Control with SIMATIC- SIMATIC NET SOFTWARE
USB-Adapter6GK1571-0BA00-0AA0S7 RS485, PC USB
ET 200S PN IM 151-3PNIncludes 2 RJ45 PortsPackage with PROFINET
S7- ControllerPackages with PROFINETand PROFIBUS
ETHERNET connection for Engineering
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 13 Industry Sector
including 5 m cableg
For PROFIBUS only interfacehas to b ordered separately
Overview / List / Graphic / Cabinet
SIMATIC STEP 7 Professional – Software for Training1er License
► Quick start into automation
► Engineering Software
► Energy EfficiencyTIA PORTAL1 x Combo-license for interchangeable usage of: SIMATIC STEP 7 Professional V13 *
STEP 7 Professional V13 * (KOP, FUP, AWL), S7-GRAPH, S7-SCL, S7-PLCSIMor: SIMATIC STEP 7 Professional 2010 SR3
STEP V SP3 (KOP FUP AWL) S GRAPH V 3 SP S SCL V 3 SP6 S PLCSIM V 4 SP
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Check HW Compatibility for TIA Portal More
STEP 7 V5.5 SP3 (KOP, FUP, AWL), S7-GRAPH V5.3 SP7, S7-SCL V5.3 SP6, S7-PLCSIM V5.4 SP51 x Combo-license for interchangeable usage
of: SIMATIC STEP 7 Safety Advanced V13 *or: SIMATIC S7-Distributed Safety 5.4 SP5 Update 1
1 x SINAMICS Startdrive V13 * for SINAMICS G120 CONTROL UNIT CU240E-2 CU250S-2 (with Firmare V4 6)
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
SW functional identical to the industrial version
for TIA Portal More1 x SINAMICS Startdrive V13 for SINAMICS G120 CONTROL UNIT CU240E-2, CU250S-2 (with Firmare V4.6)
Licenses only for STEP 7 Professional 2010 SR31 x SIMATIC S7-IMAP V3.0 SP31 x SIMATIC S7-Technology V4.2 SP3
► Additional
► Drive TechnologiesSystem requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1 32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: Authorization on USB Stick (1 Stick)Core product for vocational W ld C I d i l C l
* V13: also 64 BIT Windows 8.1 Professional, Enterprise
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 14 Industry Sector
Technical note: Authorization on USB-Stick (1 Stick)
Order number: 6ES7822-1AA03-4YA5
Overview / List / Graphic / Cabinet
World Cup Industrial ControlMore: www.siemens.com/worldskills
TIA Portal siemens.com/tia-portal/details
SIMATIC STEP 7 Professional – Software for Training12er Classroom License
12 x Combo-license for freely interchangeable usage of: SIMATIC STEP 7 Professional V13 *
STEP 7 Professional V13 * (KOP, FUP, AWL), S7-GRAPH, S7-SCL, S7-PLCSIMor: SIMATIC STEP 7 Professional 2010 SR3
STEP V SP3 (KOP FUP AWL) S GRAPH V 3 SP S SCL V 3 SP6 S PLCSIM V 4 SP
TIA PORTAL
► Quick start into automation
► Engineering Software
► Energy Efficiency
STEP 7 V5.5 SP3 (KOP, FUP, AWL) S7-GRAPH V5.3 SP7, S7-SCL V5.3 SP6, S7-PLCSIM V5.4 SP512 x Combo-license for freely interchangeable usage
of: SIMATIC STEP 7 Safety Advanced V13 * or: SIMATIC S7-Distributed Safety 5.4 SP5 Update 1
12 x SINAMICS Startdrive V13 * for SINAMICS G120 CONTROL UNIT CU240E-2 CU250S-2 (with Firmare V4 6)Check HW Compatibility for TIA Portal More PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
12 x SINAMICS Startdrive V13 for SINAMICS G120 CONTROL UNIT CU240E-2,CU250S-2 (with Firmare V4.6) Licenses only for STEP 7 Professional 2010 SR312 x SIMATIC S7-IMAP V3.0 SP312 x SIMATIC S7-Technology V4.2 SP3
3 x 20 Software for Students, SIMATIC STEP 7 Professional, limited to 365 days via authorization, (Details slide 16) Student License
SW functional identical to the industrial version
for TIA Portal More
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, 32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note: For vocation schools, Colleges and Universities, non commercial research institutions, non commercial training departments and not for in-house vocational training departments!
Technical note: Authorization on USB Stick (1 Stick + 3 Sticks with 20 Software for Students)
* V13: also 64 BIT Windows 8.1 Professional, Enterprise
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 15 Industry Sector
Technical note: Authorization on USB-Stick (1 Stick + 3 Sticks with 20 Software for Students)
Order number: 6ES7822-1BA03-4YA5 Upgrade von STEP 7 Prof. < 2010 et . <V12: 6ES7822-1AA03-4YE5
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC STEP 7 Professional Software for studentsSingle License – limited to 365 days
20 x Combo-license for interchangeable usage of: SIMATIC STEP 7 Professional V13 *
STEP 7 Professional V13 * (KOP, FUP, AWL), S7-GRAPH, S7-SCL, S7-PLCSIMor: SIMATIC STEP 7 Professional 2010 SR3
STEP 7 V5 5SP3 (KOP FUP AWL) S7 GRAPH V5 3 SP7 S7 SCL V5 3 SP6 S7 PLCSIM V5 4 SP5
TIA PORTALStudent License
► Quick start into automation
► Engineering Software
► Energy Efficiency
STEP 7 V5. 5SP3 (KOP, FUP, AWL), S7-GRAPH V5.3 SP7, S7-SCL V5.3 SP6, S7-PLCSIM V5.4 SP5
20 x SINAMICS Startdrive V13 * for SINAMICS G120 CONTROL UNIT CU240E-2; CU250S-2 (with Firmare V4.6) Software functional identical to the industrial version, but is limited to 365 days through authorization
Package with: Check HW Compatibility for TIA Portal More PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
5 * DVDs SIMATIC STEP 7 Professional 2010 SR3 , 5 * DVDs SIMATIC STEP 7 Professional V13 * 5 * DVDs SIMATIC STEP 7 Professional V13 * , PLCSIM, 5 * DVDs SIMATIC STEP 7 Basic V13 * 5 * DVDs SINAMICS Startdrive V13 *
SW functional identical to the industrial version
for TIA Portal More
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocation schools, Colleges and Universities, non commercial research institutions, non commercial training departments and not for in-house vocational training departments!
Technical note: Authorization on USB Stick (1 Stick)
* V13: also 64 BIT Windows 8.1 Professional, Enterprise
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 16 Industry Sector
Technical note: Authorization on USB-Stick (1 Stick)
Order number: 6ES7822-1AC03-4YA5
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC S7 PID Control with SIMATIC Standard and Modular
Standard control 6ES7860-2AA00-4YX06 x SIMATIC S7, STANDARD PID CONTROL V5.2 SP1, PARAMETRIZATION SW, FLOATING LICENSE FOR 1 INSTALLATION, E-SW,
SW AND DOCU ON CD, LICENSE KEY ON USB-STICK6ES7830-2AA22-0YX0
1 x STANARD PID CONTROL V5.2 SINGLE LICENSE FOR 1 INSTALLATION R-SW, SW AND DOCU ON CD 6ES7860-2AA21-0YX05 x STANARD PID CONTROL V5 2 SINGLE LICENSE FOR 1 INSTALLATION R SW WITHOUT SW AND DOCU 6ES7860 2AA21 0YX1
► Quick start into automation
► Engineering Software
► Energy Efficiency
5 x STANARD PID CONTROL V5.2 SINGLE LICENSE FOR 1 INSTALLATION R-SW, WITHOUT SW AND DOCU 6ES7860-2AA21-0YX11 x PID SELF TUNER V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, SW AND DOCU ON CD 6ES7860-4AA01-0YX05 x PID SELF TUNER V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, WITHOUT SW+DOCU 6ES7860-4AA01-0YX1
6 x MODULAR PID CONTROL V5.1 SP1, PARAMETRIZATION SW, FLOATING LICENSE FOR 1 INSTALLATION E-SW, 6ES7830-1AA11-0YX0Modular control 6ES7860-1AA00-4YX0
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
, , ,SW AND DOCU ON CD
6ES7830 1AA11 0YX0
1 x MODULAR PID CONTROL, V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, SW AND DOCU ON CD 6ES7860-1AA10-0YX05 x MOD.PID CTRL, FB V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, WITHOUT SW AND DOCU 6ES7860-1AA10-0YX11 x PID SELF TUNER V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, SW AND DOCU. ON CD 6ES7860-4AA01-0YX05 x PID SELF TUNER V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, WITHOUT SW AND DOCU 6ES7860-4AA01-0YX1
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: None available
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 17 Industry Sector
Technical note: None available
Order number: Standard: 6ES7860-2AA00-4YX0 Modular: 6ES7860-1AA00-4YX0
Overview / List / Graphic / Cabinet
SIMATIC S7 PID Control with SIMATIC Standard and Modular
Details
Standard-control consisting of:6 x parameterization setting software Version 5.26 x function block Version 5.2Integration continuous PID controller impulse controller step controller into the STEP 7
Details
► Quick start into automation
► Engineering Software
► Energy Efficiency
Integration continuous PID controller, impulse controller, step controller into the STEP 7 application program starting from PLC SIMATIC S7-313.
Modular control consisting of:6 x Start-up-tool Version 5.16 x function block Version 5 1 PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
6 x function block Version 5.1Extended features when used with the Standard-Module starting from PLC SIMATIC S7-313.
Each package contains additionally6 x PID Self-Tuner V5.1 for Online-parameterization and Online-adaption
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
p pwhile the application is running.
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 18 Industry SectorOverview / List / Graphic / Cabinet
SIMATIC CFC 12er Classroom License
12 x SIMATIC CFC V8.0
3 x 20 Software for Students SIMATIC CFC V8.0SW limited to 365 days through authorization20 li USB ti k
Student License
► Quick start into automation
► Engineering Software
► Energy Efficiency
20 licenses per USB-stick.
C
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
SW functional identical to the industrial version ► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocation schools, Colleges and Universities, non commercial research institutions, non commercial training departments and not for in-house vocational training departments!
Technical note: Authorization on USB-Stick (1pieces)
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 19 Industry SectorOverview / List / Graphic / Cabinet
Technical note: Authorization on USB Stick (1pieces)
Order number: 6ES7658-1EX08-0YS5
SIMATIC CFC software for students Single license – limited to 365 days
20 x SIMATIC CFC V8.0SW limited to 365 days through authorization20 licenses per USB-stick.
Student License
► Quick start into automation
► Engineering Software
► Energy Efficiency
C
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
SW functional identical to the industrial version ► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocation schools, Colleges and Universities, non commercial research institutions, non commercial training departments and not for in-house vocational training departments!
Technical note: Authorization on USB-Stick (1pieces)
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 20 Industry Sector
Technical note: Authorization on USB Stick (1pieces)
Order number: 6ES7658-1EX08-0YS6
Overview / List / Graphic / Cabinet
SIMATIC NET Software IE Softnet 12er Classroom License
12 X 6GK1704-1CW12-0AA0 SIMATIC NET IE SOFTNET-S7 V12SIMATIC NET SOFTNET-IE S7 V12 SW F. S7-,S5-COMP.-COMM.,OPC; PG/OP-COMM.,CONF. SW, MAX 64 CONN; SINGLE LIC. F.1 INSTALLATION; R-SW, SW + ELECTR. MAN ON DVD; LICENSE KEY ON USB-STICK; CLASS A; 2-LANGUAGES (G,E); FOR 32/64BIT WIN 7 PROF/ULT
TIA PORTAL
► Quick start into automation
► Engineering Software
► Energy Efficiency
FOR 32/64BIT: WIN 7 PROF/ULT, WINDOWS SERVER 2008 R2, SERVER 2012 FOR CP1612
Check HW Compatibility for TIA Portal More PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
SW functional identical to the industrial version
for TIA Portal More
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Ultimate SP132 BIT: WINDOWS 7 Professional, Ultimate SP1
Sales note: For vocation schools, Colleges and Universities, non commercial research institutions, non commercial training departments and not for in-house vocational training departments!
Technical note: None available
also 64 BIT Windows 8.1 Professional, Enterprise
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 21 Industry Sector
Technical note: None available
Order number: 6GK1950-0BB01
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Quick start into automation
• Overview
• SIMIT SCE Simulation
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 22 Industry SectorOverview / List / Graphic / Cabinet
Training curriculums siemens.com/sce/modules
SIMIT SCE Simulation
► Quick start into automation
► Engineering Software
► Energy Efficiency1. Create/change/test (Dongle-user/single-user license) of virtual process models (plants) in PC with SIMIT2. Test of STEP 7 program with SIMIT (campus – license) through MPI or ETHERNET/PROFINET
with a SIMATIC S7-300/400 PLC or with S7-PLCSIM (starting from Version 5.4 SP3) on the PC
I/O li it
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automationI/O limits:64 binary inputs E 0.0-E 7.7 64 binary outputs A 0.0-A 7.7 8 analog inputs EW 64-EW 788 analog outputs AW 64-AW 78400 components and controls per project
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
SIMIT Models fordownload Here
► Additional
► Drive TechnologiesSystem requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3NET Framework Version 3.5 SP1(included in delivery SIMIT 7.0)STEP 7 Professional 2010
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 23 Industry Sector
Technical note: Hardware USB-Dongle
Order number: See next page
Overview / List / Graphic / Cabinet
SIMIT SCE Simulation License variations
SIMIT SCE V7.0 CL Campus license with one DongleOrder number: 9AP1414-2AA80
SIMIT SCE V7.0 3CL Campus license with three Dongle ► Quick start into automation
► Engineering Software
► Energy Efficiency
Order number: 9AP1414-2AA82
SIMIT SCE V7.0 CL Upgrade from SIMIT SCE V5.0 to Campus license with one DongleOrder number: 9AP1414-2AA81
S SC C f PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
SIMIT SCE V7.0 3CL Upgrade from 9AP1414-2AA80 to 9AP1414-2AA82(additional deliverer of two dongles to a existing Campus license with one Dongle)Order number: 9AP1414-2AA83
SIMIT SCE V7.0 2EL two single licenses (two dongles, without possibility to generate Student model!)Order number: 9AP1414-2AA86
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3NET Framework Version 3.5 SP1 (included in delivery SIMIT 7.0)STEP 7 Professional 2010
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
Order number: 9AP1414 2AA86
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 24 Industry Sector
g g pinstitutions and non commercial training departments!
Technical note: Hardware USB-Dongle
Overview / List / Graphic / Cabinet
SIMIT SCE Simulation Use cases Campus Licenses
Educator at school „X“ Free exchange of archived SIMIT-Models Educator at school „Y“
► Quick start into automation
► Engineering Software
► Energy Efficiency
Educator (Dongle owner):• Create, adapt, export and share models• Create own models• Export and hand-over own models• Generation of the executable simulation model for
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
the students with password for the unlimited use at the own campus
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
Test of a STEP 7 application program
Students
Executable Simulation modelwith unlimited users
Test of a STEP 7 application program
Students
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 25 Industry Sector
pp p g
Overview / List / Graphic / Cabinet
SIMIT SCE Simulation Use cases Campus Licenses
Networked environment (UDP)
Students
Educator:► Quick start into
automation
► Engineering Software
► Energy Efficiency
Students
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
* Password:
Distributed none networked environment► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
Password:
Students
Educator:
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 26 Industry Sector
*The lifetime of executable simulation models is limited to 6 month and can be renewed through the owner of the Dongle as often as needed..
Overview / List / Graphic / Cabinet
SIMIT SCE Simulation Student Projects with two different licenses
School-Dongle A “School-Campus”
Educator:
7 digit license key SIMIT SCE for Students► Quick start into
automation
► Engineering Software
► Energy Efficiency
SIMIT SCE for Students
1. Installation Run-Time Software and input of 7 digit license key from School-Dongle A and School-Dongle B
Generation of student projectpostfix = simit4S
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
2. SIMIT-Project with postfix simit4S Usage withpassword for 6 month without Dongle.
preceives password for students
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
* The life-span of the executable simulation model is limited to 6 month and can be continuously renewed by the owner of the dongle.
School-Dongle B “Additional School-Campus”
Educator:
7 digit license key
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 27 Industry SectorOverview / List / Graphic / Cabinet
Micro Automation
• Overview
• LOGO! 12/24V and 230V / USB-cable
• LOGO! 12/24V and 230V / ETHERNET-Interface
• Basic Panel KTP400 for LOGO! 1er
• Basic Panel KTP400 for LOGO! 6er
• Basic Panel KTP700 for S7-1200
• Upgrade STEP 7 V13 Basic for S7-1200 Package
• S7-1200
pg g
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 28 Industry SectorOverview / List / Graphic / Cabinet
Training curriculums siemens.com/sce/modules
LOGO! 12/24V or 230V
► Quick start into automation
► Engineering Software
► Energy EfficiencyLOGO! 12/24V 5x LOGO! 12/24 RC 6ED1052-1MD00-0BA65x LOGO! Soft Comfort V7.1 6ED1058-0BA02-0YA11x LOGO! PC-cable (USB) 6ED1057-1AA01-0BA0
C
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
LOGO! 230V 5x LOGO! 230 RC 6ED1052-1FB00-0BA65x LOGO! Soft Comfort V7.1 6ED1058-0BA02-0YA11x LOGO! PC cable (USB) 6ED1057 1AA01 0BA0
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
1x LOGO! PC-cable (USB) 6ED1057-1AA01-0BA0
LOGO! PC-cable 4x LOGO! PC-cable (USB) 6ED1057-1AA01-0BA0
► Additional
► Drive TechnologiesSystem requirements: WINDOWS 98SE, NT4.0, ME, 2000, XP, VISTA, WIN7, MAC OS X, LINUX
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: None available
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 29 Industry Sector
Order number: 12/24V : 6ED1057-3SA00-0YA1 Cable-Set: 6ED1057-3SA00-0YC0 230V : 6ED1057-3SA00-0YB1
Overview / List / Graphic / Cabinet
LOGO! 12/24V or 230V with ETHERNET-Interface
LOGO! 12/24V 6x LOGO! 12/24 RCE 6ED1052-1MD00-0BA76x LOGO! Soft Comfort V7.1 6ED1058-0BA02-0YA1
► Quick start into automation
► Engineering Software
► Energy Efficiency
LOGO! 230V6x LOGO! 230 RCE 6ED1052-1FB00-0BA76x LOGO! Soft Comfort V7.1 6ED1058-0BA02-0YA1
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Recommended accessory: 6AV2132-0AF00-0AA0Trainer Package: SIMATIC Basic Panel KTP400
Recommended accessory: 6XV1870-3RH60SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Recommended accessory: 6GK1950-0BB00Trainer Package:FASTCONNECT Accessories Kit ► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: WINDOWS 98SE, NT4.0, ME, 2000, XP, VISTA, MAC OS X, LINUX
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: Ethernet-cable required
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 30 Industry Sector
Order number: 12/24V : 6ED1057-3SA10-0YA1230V : 6ED1057-3SA10-0YB1
Overview / List / Graphic / Cabinet
SIMATIC Basic Panel KTP400 for LOGO! 1er ETHERNET Version …0BA7
1 X SIMATIC HMI KTP400 BASIC COLOR PN, BASIC PANEL,KEY AND TOUCH OPERATION,4" WIDESCREEN-TFT-DISPLAY,65536 COLORS,PROFINET INTERFACE,CONFIGURATION FROMWINCC BASIC V13 / STEP 7 BASIC V13.
6AV2123-2DB03-0AX0
► Quick start into automation
► Engineering Software
► Energy Efficiency
1 X SCALANCE XB005UNMANAGED INDUSTRIAL ETHERNETSWITCH FOR 10/100MBIT/S; WITH5 X 10/100MBIT/S TWISTED PAIRPORTS WITH RJ45-SOCKETS;FOR CONFIGURING SMALL STARAND LINE TOPOGRAPHIES;LED-DIAGNOSIS,IP20,24 V DC POWER SUPPLY,INCL. MANUAL
6GK5005-0BA00-1AB2
2 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45 CAT 6 CROSSED TP CABLE 4X2 6XV1870 3RH60 PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
2 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, PREASSEMBLED WITH. 2 RJ45 CONNECTORS, LENGTH 6 M
6XV1870-3RH60
1 X SIMATIC WINCC BASIC V13 ENGINEERING-SW, FLOATING LICENSE SW AND DOCUMENTATION ON DVD, FOR CONFIGURATION OF SIMATIC BASIC PANELS
6AV2100-0AA03-0AA5► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: WINDOWS 7 (32 BIT, 64 BIT), WINDOWS 8 SP1 (64 BIT)
Sales note:
Technical note:
For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!Authorization for WINCC BASIC on USB-Stick
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 31 Industry SectorÜbersicht / Liste / Grafik / Koffer
TIA Portal siemens.de/tia-portal/detailsOrder number: 6AV2132-2DB03-0AA1
SIMATIC Basic Panel KTP400 for LOGO! 6er ETHERNET Version …0BA7
6 X SIMATIC HMI KTP400 BASIC COLOR PN, BASIC PANEL,KEY AND TOUCH OPERATION,4" WIDESCREEN-TFT-DISPLAY,65536 COLORS,PROFINET INTERFACE,CONFIGURATION FROMWINCC BASIC V13 / STEP 7 BASIC V13.
6AV2123-2DB03-0AX0
► Quick start into automation
► Engineering Software
► Energy Efficiency
6 X SCALANCE XB005UNMANAGED INDUSTRIAL ETHERNETSWITCH FOR 10/100MBIT/S; WITH5 X 10/100MBIT/S TWISTED PAIRPORTS WITH RJ45-SOCKETS;FOR CONFIGURING SMALL STARAND LINE TOPOGRAPHIES;LED-DIAGNOSIS,IP20,24 V DC POWER SUPPLY,INCL. MANUAL
6GK5005-0BA00-1AB2
12 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45 CAT 6 CROSSED TP CABLE 4X2 6XV1870 3RH60 PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
12 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, PREASSEMBLED WITH. 2 RJ45 CONNECTORS, LENGTH 6 M
6XV1870-3RH60
6 X SIMATIC WINCC BASIC V13 ENGINEERING-SW, FLOATING LICENSE SW AND DOCUMENTATION ON DVD, FOR CONFIGURATION OF SIMATIC BASIC PANELS
6AV2100-0AA03-0AA5► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: WINDOWS 7 (32 BIT, 64 BIT),WINDOWS 8 SP1 (64 BIT)
Sales note:
Technical note:
For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!Authorization for WINCC BASIC on USB-Stick
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 32 Industry SectorÜbersicht / Liste / Grafik / Koffer
TIA Portal siemens.de/tia-portal/detailsOrder number: 6AV2132-2DB03-0AA0
SIMATIC Basic Panel KTP400 for LOGO! ETHERNET Version …0BA7
► Quick start into automation
► Engineering Software
► Energy Efficiency
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
SIMATIC KTP400 BASIC COLOR PN 6AV2123-2DB03-0AX0
ETHERNET-Cable6XV1870-3RH60
SIMATIC WINCC BASIC V13 ENGINEERING-SW6AV2100-0AA03-0AA5
SCALANCE XB005 6GK5005-0BA00-1AB2 ► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
Package 6AV2123-2DB03-0AA1 contains 1 x
Package 6AV2123-2DB03-0AA0
Package 6AV2123-2DB03-0AA1 contains 2 x
Package 6AV2123-2DB03-0AA0
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 33 Industry SectorÜbersicht / Liste / Grafik / Koffer
TIA Portal siemens.de/tia-portal/details
Package 6AV2123 2DB03 0AA0 contains 6 x
Package 6AV2123 2DB03 0AA0 contains 12 x
SIMATIC S7-1200 AC/DC/RELAIS or DC/DC/DC
6 X Alternative:SIMATIC S7-1200, CPU 1214C, COMPACT CPU, AC/DC/RLY, ONBOARD I/O: 14 DI 24V DC; 10 DO RELAY 0,5A; 2 AI 0 - 10V DC, POWER SUPPLY: AC 85 - 264 V AC @ 47 - 63 HZ, PROGRAM/DATA MEMORY: 75 KB Firmware 4.0
6ES7214-1BG40-0XB0AC –Pack. 6ES7214-1BE30-4AB3
► Quick start into automation
► Engineering Software
► Energy Efficiency
6 X Alternative:SIMATIC S7-1200, CPU 1214C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V DC; 2 AI 0 - 10V DC, POWER SUPPLY: DC 20.4 - 28.8 V DC, PROGRAM/DATA MEMORY: 75 KB Firmware 4.0
6ES7214-1AG40-0XB0DC -Pack: 6ES7214-1AE30-4AB3
6 X SIMATIC S7, STEP 7 BASIC V13 SINGLE LICENSE, E-SW, SW AND DOCU. ON DVD, CLASS A, 2 LANGUAGES (GE,EN), REFERENCE-HW:S7-1200
6ES7822-0AA03-0YA5
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
S t i t WINDOWS 7 (32 BIT 64 BIT) WINDOWS 8 SP1 (64 BIT)
6 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
6XV1870-3RH60
6 X SIMATIC S7-1200, SIMULATOR MODULE, 8 CHANNEL SIMULATOR DC INPUT SWITCHES 6ES7274-1XF30-0XA0
6 X SIMATIC S7-1200, ANALOG OUTPUT SB 1232, 1 AO, +/- 10VDC (12 BIT RES.) OR 0 - 20 MA 6ES7232-4HA30-0XB0 ► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: WINDOWS 7 (32 BIT, 64 BIT), WINDOWS 8 SP1 (64 BIT)
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: Authorization for STEP 7 BASIC on USB-Stick
Order number: AC/DC/RLY DC/DC/DC
6x
TIA PORTAL► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 34 Industry Sector
Order number: AC/DC/RLY DC/DC/DC6ES7214-1BE30-4AB3 6ES7214-1AE30-4AB3
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC S7-1200 AC/DC/RELAIS or DC/DC/DC
Packages contains 6 times
► Quick start into automation
► Engineering Software
► Energy Efficiency
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Compact PLC6ES7214-1BG40-0XB0alternatively:6ES7214-1AG40-0XB0
SIMULATOR MODUL, 8 INPUT SWITCHES, DC INPUT 6ES7274-1XF30-0XA0
ANALOG OUTPUT, SB 1232, 1 AO, +/-10VDCOR 0 - 20 MA (11 BIT RESOULUTION)6ES7232-4HA30-0XB0
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 35 Industry Sector
STEP 7 BASIC V136ES7822-0AA03-0YA5
ETHERNET-CABLE6XV1870-3RH60
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC Basic Panel KTP700 for S7-1200 6er ETHERNET
6 X SIMATIC HMI, KTP700 BASIC,BASIC PANEL,KEY AND TOUCH OPERATION,7" TFT DISPLAY, 65536 COLORS,PROFINET INTERFACE,CONFIGURATION FROM WINCC BASIC V13/ STEP7 BASIC V13,CONTAINS OPEN SOURCE SW WHICHIS PROVIDED FREE OF CHARGE FOR DETAILS SEE CD
6AV2123-2GB03-0AX0
► Quick start into automation
► Engineering Software
► Energy Efficiency
6 X SCALANCE XB005 UNMANAGED INDUSTRIAL ETHERNET SWITCH FOR 10/100MBIT/S; WITH5 X 10/100MBIT/S TWISTED PAIRPORTS WITH RJ45-SOCKETS;FOR CONFIGURING SMALL STAR-AND LINE TOPOGRAPHIES;LED-DIAGNOSIS, IP20,24 V DC POWER SUPPLY,INCL. MANUAL
6GK5005-0BA00-1AB2
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
12 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
6XV1870-3RH60
For engineering SIMATIC STEP 7 /WinCC V13 is absolutely necessary. Upgrade (slide 38)
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: WINDOWS 7 (32 BIT, 64 BIT),WINDOWS 8 SP1 (64 BIT)
Sales note:
Technical note:
For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Engineering Software required
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 36 Industry Sector
Order number: 6AV2123-2GB03-0AA0
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC Basic Panel KTP700 for S7-1200 6er ETHERNET
Package contains 6 times Contains 12 times
► Quick start into automation
► Engineering Software
► Energy Efficiency
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
ETHERNET-cable6XV1870-3RH60
SIMATIC KTP700 BASIC COLOR PN 6AV2123-2GB03-0AX0
SCALANCE XB005 6GK5005-0BA00-1AB2
For engineering SIMATIC STEP 7 /WinCC V13 is absolutely necessary. Upgrade (slide 38)
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 37 Industry SectorOverview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC STEP 7 Basic V13 – Software for TrainingUpgrade
6 x STEP 7 Basic V13 Upgrade Version V10.5/ V11 /V12 to V13SIMATIC STEP 7 BASIC V13TRAINER PACK UPGRADE V13,ENGINEERING-SOFTWARE; UPGRADE FOR 6 V10.5/V11/V12 SINGLEFLOATING-> V13 FLOATING; SOFTWARE AND DOCU ON DVD;
TIA PORTAL
► Quick start into automation
► Engineering Software
► Energy Efficiency
FLOATING > V13 FLOATING; SOFTWARE AND DOCU. ON DVD;LICENSE-KEYS ON USB; 6 LANGUAGES(GE,EN,IT,FR,SP,CH)FOR CONFIGURATION OF SIMATIC S7-1200, SIMATIC BASIC PANELS
6 x SINAMICS Startdrive V13 for SINAMICS G120 CONTROL UNIT CU240E-2 , CU250S-2 (with Firmware V4.6)PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Package with: : 2 * DVDs SIMATIC STEP 7 Basic V13, 2 * DVDs SINAMICS Startdrive V13
For Hardware Package S7-1200 (slide 34) and Basic Panel KTP400 (slide 31) and Basic Panel KTP700 (slide 36) ► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: WINDOWS 7 (32 BIT, 64 BIT),WINDOWS 8 SP1 (64 BIT)
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: Authorization on USB Stick
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 38 Industry Sector
Technical note: Authorization on USB-Stick
Order number: 6ES7822-0AA03-4YE5
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Operator control & monitoring
• Overview
• Overview STEP 7 and HMI
• WinCC Advanced V13 / WinCC flexible 2008 SP3
• WinCC Advanced V13 / WinCC flexible 2008 SP 3Software for students
SIMATIC HMI TP700 / TP1500 COMFORT PANEL
• WinCC V7 SP 3 6er License
• Upgrade WinCC V7 SP 3 6er License
• SIMATIC HMI TP700 / TP1500 COMFORT PANEL
• WinCC/Web Navigator V7 SP 3 6er License
• Upgrade WinCC/Web Navigator V7 SP 3 6er License
• WinCC/Web Navigator V7 SP 3 6er License (ASIA)
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 39 Industry SectorOverview / List / Graphic / Cabinet
Training curriculums siemens.com/sce/modules
Trainer Packages Overview structure STEP 7 and HMI
SIMATIC Software- STEP 7 as the BasisEngineering tools for STEP 7- S7-PLCSIM Simulation of S7-300-HW
Touch- or Operator-PanelTP700 with buttonPROFIBUS and PROFINET connection
- S7-SCL similar to Pascal- S7-GRAPH for sequence control with
IEC 61131-3 / DIN 1131-3
SIMATIC HMI software -Human Machine Interface
ETHERNET connection for Engineering Human Machine Interface
WinCC with- Advanced level- Smart Option for Panel / PC- Smart Access
OPC Interface
USB-Adapter PROFIBUS
PROFINET
- OPC-Interface
Software Engineering Tool for STEP 7- SIMATIC CFC- PID Control with SIMATIC- SIMATIC NET SOFTWARE
USB-Adapter6GK1571-0BA00-0AA0S7 RS485, PC USB
ET 200S PN IM 151-3PNIncludes 2 RJ45 PortsPackage with PROFINET
S7-300ControllerPackages with PROFINETand PROFIBUS
ETHERNET connection for Engineering
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 40 Industry Sector
IE SOFTNET including 5 m cableg
For PROFIBUS only interfacehas to b ordered separately
Overview / List / Graphic / Cabinet
SIMATIC WinCC Advanced V12 SP1/ WinCC flexible 2008 SP36er Classroom License
► Quick start into automation
► Engineering Software
► Energy EfficiencyTIA PORTAL6 x Combo-license for freely interchangeable usage Engineering SWof: SIMATIC WinCC Advanced V13 *or: SIMATIC WinCC flexible 2008 SP3
6 O ti d R ti ft (D t il lid 41)
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation6 x Options- and Runtimesoftware (Details slide 41)
Additionally included in the Full package: 6AV2102-0AA03-0AS5:2 x 20 SIMATIC WinCC Advanced V13 * / WinCC flexible 2008 SP3 for Students (Details slide 42)Software functional identical to the industrial version, but is limited to 365 days through authorization
Student License
Check HW Compatibility for TIA Portal More
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
Core product for vocational World Cup Industrial ControlMore: www.siemens.com/worldskills
SW functional identical to the industrial version
for TIA Portal More
► Additional
► Drive TechnologiesSystem requirements: 64 BIT: WINDOWS 7 Professional, Enterprise (not N), Ultimate SP132 BIT: WINDOWS 7 Professional, Enterprise (not N), Ultimate SP1
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
T h i l t A th i ti USB Sti k (1 Sti k) U d t 2008 SP3 2008 V11 d V12 t Ad d V13
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 41 Industry Sector
Technical note: Authorization on USB-Stick (1 Stick) Upgrade to 2008 SP3 2008;V11 and V12 to Advanced V13
Order number: 6AV2102-0AA03-0AS5 6AV6613-1XA01-3CS0 6AV2102-4AA03-0AS5
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC WinCC Advanced V12 SP1/ WinCC flexible 2008 SP3Option and Runtime Software
WinCC Advanced V13
WinCC RT Advanced (128 Power Tags)WinCC Recipes for RT AdvancedWinCC Logging for RT Advanced
TIA PORTAL
► Quick start into automation
► Engineering Software
► Energy Efficiency
WinCC flexible 2008 SP3
WinCC Logging for RT AdvancedWinCC Sm@rtServer for RT AdvancedWinCC Sm@rtServer for SIMATIC Panel
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
WinCC flexible 2008 SP3WinCC flexible 2008 SP3 Runtime (128 Power Tags)WinCC flexible/Sm@rtAccess for PanelsWinCC flexible/Sm@rtAccess for PCWinCC flexible/Sm@rtService for Panels
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
WinCC flexible/Sm@rtService for PCWinCC flexible/OPC-Server for PCWinCC flexible/Archives for PCWinCC flexible/Recipes for PC
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 42 Industry SectorOverview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC HMI WinCC Advanced V13/ WinCC flexible 2008 SP3 Single License for Students – limited to 365 days
TIA PORTAL20 x Combo-license for interchangeable usage the Engineering SW of : SIMATIC WinCC Advanced V13 *or: SIMATIC WinCC flexible 2008 SP3
Li li it d t 365 d th h th i ti
Student License
► Quick start into automation
► Engineering Software
► Energy Efficiency
Licences limited to 365 days through authorization
Runtime Licences:20 x SIMATIC WinCC RT Advanced V13 * -128 PowerTags20 x SIMATIC WinCC flexible 2008 Runtime SP3 - 128 PowerTags
Software functional identical to the industrial version, but is limited to 365 days through authorization Check HW Compatibility for TIA Portal More
Student License
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Package with:10 * DVDs WinCC Advanced V13 and 10 * DVDs SIMATIC WinCC flexible 2008 SP3
SW functional identical to the industrial version
for TIA Portal More
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise (not N), Ultimate SP132 BIT: WINDOWS 7 Professional, Enterprise (not N), Ultimate SP1
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
T h i l t A th i ti USB Sti k
* V13: also 64 BIT Windows 8.1 Professional, Enterprise
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 43 Industry Sector
Technical note: Authorization on USB-Stick
Order number: 6AV2102-0AA03-0AS7
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC HMI TP700 / TP1500 COMFORT, COMFORT PANELwith PROFINET and MPI/PROFIBUS DP INTERFACE
alternative:1 x 7“ SIMATIC HMI TP700 COMFORT, Touch Panel with 6AV2124-0GC01-0AX0
PROFINET and MPI/PROFIBUS DP INTERFACE (Panel with integrated Switch for 2 x RJ 45 ports)
lt ti
TIA PORTAL
► Quick start into automation
► Engineering Software
► Energy Efficiency
alternativ:1 x 15“ SIMATIC HMI TP1500 COMFORT, Touch Panel mit 6AV2124-0QC02-0AX0
PROFINET and MPI/PROFIBUS DP INTERFACE (Panel with integrated Switch for 2 x RJ 45 ports)
Additionally the package contains Check HW Compatibility for TIA Portal More C
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
• 1 x Engineering- Options- and Runtimesoftware SW and LicenseSIMATIC WinCC Advanced V13 (Details slide 42)
• 1 x SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6,CROSSED TP CABLE 4X2, PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M 6XV1870-3RH60
SW functional identical to the industrial version
for TIA Portal More
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
The TP 700 can only be programmed and configured with SIMATIC WinCC Comfort, Advanced, Professional V11 and V12 (TIA Portal) System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1. Windows 8.1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1,
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: Authorization on USB Stick (1 Stick)
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 44 Industry Sector
Technical note: Authorization on USB-Stick (1 Stick)
Order number: 6AV2133-4AF00-0AA0 (with TP700) 6AV2133-4BF00-0AA0 (with TP1500)
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC WinCC V7 SP3Classroom License
WinCC V7 – Trainer Package 6x WinCC V7.0 SP3, Complete version with RC2048 Variables
WinCC and WinCC/Web Navigator V7 – Upgrade 6 Wi CC RC d V6 0 > V7 0 SP3 V6 2 > V7 0 SP3
► Quick start into automation
► Engineering Software
► Energy Efficiency
6 x WinCC RC upgrade, V6.0 -> V7.0 SP3, V6.2 -> V7.0 SP3,Complete version RC 2048 variables
6 x WinCC/WebNavigator Upgrade, V6.0 -> V7.0 SP3, V6.2 -> V7 SP3
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: Authorization on USB Stick
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 45 Industry Sector
Technical note: Authorization on USB-Stick
Order number: 6AV6381-1BP07-0AX5 Upgrade: 6AV6381-1BP07-0AX3
Overview / List / Graphic / Cabinet
SIMATIC WinCC/Web Navigator V7 SP3 – DiagnosticsClassroom License
WinCC/Web Navigator V7 – Trainer Package6 x WinCC V7.0 SP3, Complete version RC 2048 variables6 x WinCC/Web Navigator Diagnostics Server V7.0 SP36 x WinCC/Web Navigator Diagnostics Client V7.0 SP3 ► Quick start into
automation
► Engineering Software
► Energy Efficiency
WINCC and WinCC/Web Navigator V7 – Upgrade6 x WinCC RC Upgrade, V6.0 -> V7.0 SP1, V6.2 -> V7.0 SP3
version RC 2048 variables 6 x WinCC/Web Navigator Upgrade, V6.0 -> V7.0 SP3, V6.2 -> V7.0 SP3
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: Authorization on USB Stick
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 46 Industry Sector
Technical note: Authorization on USB-Stick
Order number: 6AV6371-1DH07-0AX5 Upgrade: 6AV6381-1BP07-0AX3
Overview / List / Graphic / Cabinet
SIMATIC WinCC/Web Navigator V7 SP 3 ASIA – DiagnosticsClassroom License
WinCC/Web Navigator V7 – ASIA Version 6 x WinCC V7.0 SP3, Complete version RC 2048 variables6 x WinCC/Web Navigator Diagnostics Server V7.0 SP36 x WinCC/Web Navigator Diagnostics Client V7.0 SP3 ► Quick start into
automation
► Engineering Software
► Energy Efficiency
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: License Key on USB Stick
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 47 Industry Sector
Technical note: License Key on USB-Stick
Order number: 6AV6371-1DH07-0AV5
Overview / List / Graphic / Cabinet
Process Automation
• Overview• Process control system SIMATIC PCS 7 –
3er Software License/Upgrade3er Software License/Upgrade
• Process control system SIMATIC PCS 7 – 6er Software License
• Process control system SIMATIC PCS 7 AS RTX Box – Hardware
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 48 Industry SectorOverview / List / Graphic / Cabinet
Training curriculums siemens.com/sce/modules
Process control system SIMATIC PCS 7 3er License/Upgrade
► Quick start into automation
► Engineering Software
► Energy Efficiency1 x DVD: PCS 7 Software V8.0 SP11 x Paper: Certificate of License (A5E00276662)1 x Stick: License Key USB Stick with 3 * FLOATING LICENSES
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Recommended accessory if only DVDs Version 8.0 und 8.0 Update 1 available
6ES7658 4XX08 0YT8
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
6ES7658-4XX08-0YT8SIMATIC PCS 7, SOFTWARE MEDIA PACKAGE V8.0 SP1SOFTWARE MEDIA WITHOUT LICENSE6ES7650-4XX08-0YT8SIMATIC PCS 7, SOFTWARE SUPPORT PACKAGE V8.0SOFTWARE MEDIA WITHOUT LICENSE
► Additional
► Drive TechnologiesSystem requirements: WINDOWS XP Prof. SP3, WINDOWS Server 2003 SR2, Server 2008 SR2 , Window 7 Ultimate SP1
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: Authorization on USB-Stick
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 49 Industry Sector
Order number: 6ES7650-0XX08-0YS5 Upgrade: 6ES7650-0XX17-0YE5 from V6.X to V7.16ES7650-0XX08-0YE5 from V7.1 auf V8.0
Overview / List / Graphic / Cabinet
Process control system SIMATIC PCS 7 6er License
Equivalent to 2 x SIMATIC PCS 7 – 3er License
(content on page 52)
► Quick start into automation
► Engineering Software
► Energy Efficiency
Recommended accessory if only DVDs Version 8.0 und 8.0 Update 1 available
6ES7658 4XX08 0YT8 PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
6ES7658-4XX08-0YT8SIMATIC PCS 7, SOFTWARE MEDIA PACKAGE V8.0 SP1SOFTWARE MEDIA WITHOUT LICENSE6ES7650-4XX08-0YT8SIMATIC PCS 7, SOFTWARE SUPPORT PACKAGE V8.0SOFTWARE MEDIA WITHOUT LICENSE ► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: WINDOWS XP Prof. SP3, WINDOWS Server 2003 SR2, Server 2008 SR2 , Window 7 Ultimate SP1
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: License Key on USB Stick
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 50 Industry Sector
Technical note: License Key on USB-Stick
Order number: 6ES7650-0XX17-2YS5
Overview / List / Graphic / Cabinet
Process control system SIMATIC PCS 7 AS RTX BoxHardware
• 1 x SIMATIC PCS 7 AS RTX Box 427C
• 1 x ET 200M – Station with 7DE(144), 3DA(64), 1AE(8), 1AA(8) Assemblies
• 1 x SITOP power supply 20A with Front Connector and Communication Bus ► Quick start into automation
► Engineering Software
► Energy Efficiency
Content: see next page
Note:• PCS 7 Licences additional required (Details slide 49)• Trainer Package adjusted on PCS 7 training curriculms
C
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: WINDOWS XP Prof. SP3 (32 BIT), WINDOWS Server 2003 SR2, Server 2008 SR2 , WINDOWS 7 Ultimate SP1
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: None available
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 51 Industry Sector
Technical note: None available
Order number: 6ES7654-0UE13-0XS0
Overview / List / Graphic / Cabinet
Process control system SIMATIC PCS 7 AS RTX Box Hardware (1)
Details
1 x SIMATIC PCS 7 AS RTX AUTOMATION SYSTEM BASED ON IPC427C, CORE2 DUO 1.2 GHZ, 800 MHZ FSB, 3MB SLC, 2 GB DDR3 1066 SODIMM RAM, 4 GB COMPACT-FLASH CHANGEABLE, CP5611 ONBOARD, WINDOWS EMBEDDED STANDARD 2009, WINAC RTX 2010 SOFTWARE CONTROLLER, RUNTIME LICENSE AS PO100 PREINSTALLED FOR PCS 7 OPERATING, APPLICABLE EX PCS 7 V7.1 SP2 OR HIGHER
6ES7654-0UE13-0XX0
Details
► Quick start into automation
► Engineering Software
► Energy Efficiency
HIGHER
1 x SIMATIC,STAND.SECTIONAL RAIL WIDTH 35MM, LENGTH 483MM FOR 19 IN.CABINETS 6ES5710-8MA11
1 x SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M
6XV1870-3RH60
1 x SIMATIC NET, CONN. CABLE 830-2 F. PROFIBUS, PREASSEMBLED CABLE WITH 2 SUB-D-CONNECTORS 6XV1830-2AH50PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
9-POLE, SWITCHABLE TERMINATING RESISTORS, 5 M
1 x SITOP PSU100M 20A STABILIZED POWER SUPPLY INPUT: 120-230 V AC 110-220 V DC OUTPUT: 24 V/20 A DC
6EP1336-3BA10
2 x SIMATIC S7-300, DIGITAL INPUT SM 321, OPTICALLY ISOLATED 32DI, 24 V DC, 1 X 40 PIN 6ES7321-1BL00-0AA0
1 x SIMATIC S7/PCS7, SM 321 DIGITAL INPUT MODULE, 16 DI, 24V DC, 1 X 40 PIN, CAPABLE OF 6ES7321-7TH00-0AB0► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
, , , , ,DIAGNOSTICS, FOR CONTACTS (CONNECTED/ UNCONNECTED), NAMUR SENSOR, 3/4-WIRE-BERO, WITH FLUTTER MONITORING, PULSE LENGTHENING, WIRE BREAK DETECTION, IM153-2 INTERFACE MOD. REQUIRED
6ES7321 7TH00 0AB0
4 x SIMATIC S7-300, DIGITAL INPUT SM 321, GALVANICALLY ISOLATED, 16 DI, DC 24V, 1 X 20 PIN, PROCESS INTERRUPT, DIAGNOSTICS, FIT FOR ISOCHRONE MODE
6ES7321-7BH01-0AB0
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 52 Industry Sector
1 x SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED, 32DO, 24V DC, 0.5A, 1 X 40 PIN, SUM OF OUTPUT CURRENTS 4A/GROUP (16A/MODULE)
6ES7322-1BL00-0AA0
Overview / List / Graphic / Cabinet
Process control system SIMATIC PCS 7 AS RTX Box Hardware (2)
Details
2 x SIMATIC S7/PCS7, SM 322 DIGITAL OUTPUT MODULE, 16 DO, DC 24 V / 0,5A, CAPABLE OF DIAGNOSTICS, WIRE BREAK DETECTION TO 0 AND 1 SIGNAL, 1 X 40-PIN, INTERFACE MODULE IM 153-X HF NECESSARY
6ES7322-8BH10-0AB0
1 x SIMATIC S7-300, ANALOG INPUT SM 331, GALVANICALLY ISOLATED, 8 AI, 14 BIT, 0.052MS/CHANNEL, 6ES7331-7HF01-0AB0
Details
► Quick start into automation
► Engineering Software
► Energy Efficiency
CURRENT, VOLTAGE, INTERRUPTS, DIAGNOSTICS,1 X 20 PIN, FIT FOR ISOCHRONE MODE IMPROVED DP-CYCLE TIME FOR ISOCHRONE MODE
1 x SIMATIC S7-300, ANALOG OUTPUT SM 332, OPTICALLY ISOLATED, 8 AO, U/I; DIAGNOSTICS; RESOLUTION 11/12 BITS, 40 PIN, REMOVE/INSERT W. ACTIVE, BACKPLANE BUS
6ES7332-5HF00-0AB0
5 x SIMATIC S7 300 FRONT CONNECTOR FOR SIGNAL MODULES WITH SCREW CONTACTS 20 PIN 6ES7392 1AJ00 0AA0 PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
5 x SIMATIC S7-300, FRONT CONNECTOR FOR SIGNAL MODULES WITH SCREW CONTACTS, 20-PIN 6ES7392-1AJ00-0AA0
7 x SIMATIC S7-300,FRONT CONNECTOR WITH SCREW CONTACTS, 40-PIN 6ES7392-1AM00-0AA0
1 x SIMATIC DP, BUS UNIT FOR ET200M F. THE INTEGR.OF TWO 40 MM WIDE I/O SUBMODULES FOR INSERT/REMOVE
6ES7153-2BA02-0XB0
1 x SIMATIC DP RAIL FOR ET 200M 620 MM LONG FOR BUS MODULES FUNCTION: INSERT/REMOVE 6ES7195-1GG30-0XA0
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
1 x SIMATIC DP, RAIL FOR ET 200M 620 MM LONG FOR BUS MODULES FUNCTION: INSERT/REMOVE 6ES7195 1GG30 0XA0
1 x SIMATIC DP, BUS UNIT FOR ET200M F. THE INTEGR. OF 1 PS A.1 IM153 FUNCTION:INSERT/REMOVE-MODULE WHILE OPERATING MODE RUN INCL. COVER FOR BUS UNIT
6ES7195-7HA00-0XA0
6 x SIMATIC DP, ET 200M INTERFACE IM 153-2 HIGH FEATURE FOR MAX. 12 S7-300 MODULES, WITH REDUNDANCY, TIME STAMPING FIT FOR ISOCHRONE MODE NEW FEATURES: 12 MODULES / STATION SLAVE INITIATIVE FOR SWITCHES AND DRIVE ES EXTENDED DATA FOR HART SECON DARY
6ES7195-7HB00-0XA0
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 53 Industry Sector
SLAVE INITIATIVE FOR SWITCHES AND DRIVE ES EXTENDED DATA FOR HART SECON- DARY VARIABLES OPERATON WITH 64PT MODULES EXTENDES TIMESTAMPS WITH 32 SIGNALS / SLOT
Overview / List / Graphic / Cabinet
PLCs and Peripheries
• Overview• S7-1513 PN
• S7-314C 2PN/DP
• S7-1516 PN/DP
• S7-1516F PN/DP
• S7-314C 2PN/DP (Upgrade TIA Portal)
• S7-315F-2PN/DP
• SIMATIC ET 200S CPU IM 151-8 F PN/DP
S7-300 Safety
ET 200S Safety
• ET 200S PN
• S7-315T Technology
• SIMATIC Embedded SPS
ET 200S Safety
S7-300 Safety
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 54 Industry Sector
• Soft-SPS WinAC F RTX 2010
Overview / List / Graphic / Cabinet
Training curriculums siemens.com/sce/modules
SIMATIC S7-1513 PN
► Quick start intoautomation
► Engineering Software
► Energy Efficiency1 X SIMATIC PM 1507 24 V/8 A STABILIZED POWER SUPPLY FOR SIMATIC S7-1500 INPUT: 120/230 V AC OUTPUT: 24 V/8 A DC
6EP1333-4BA00
1 X SIMATIC S7-1500, CPU 1513-1 PN, CENTRAL PROCESSING UNIT WITH WORKING MEMORY 300 KB FOR PROGRAM AND 1.5 MB FOR DATA, 1. INTERFACE, PROFINET IRT WITH 2 PORT SWITCH, 40 NS BIT-PERFORMANCE, SIMATIC MEMORY CARD NECESSARY
6ES7513-1AL00-0AB0
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automationPERFORMANCE, SIMATIC MEMORY CARD NECESSARY1 X SIMATIC S7-1500, DIGITAL INPUT MODULE DI32 X DC24V, 32 CHANNELS IN GROUPS OF 16;
INPUT DELAY 0.05... 20MS; INPUT TYPE 3 (IEC 61131); DIAGNOSIS, PROCESSALARMS6ES7521-1BL00-0AB0
1 X SIMATIC S7-1500, DIGITAL OUTPUT MODULE DQ 32 X 24VDC/0.5A; 32 CHANNELS IN GROUPS OF 8, 4 A PER GROUP; DIAGNOSIS; SUBSTITUTE VALUE
6ES7522-1BL00-0AB0
1 X SIMATIC S7-1500, MOUNTING RAIL 482 MM (APPR. 19 INCH) INCL. GROUNDING ELEMENT, INTEGRATED DIN RAIL FOR MOUNTING OF SMALL COMPONENTS SUCH AS CLAMPS FUSES OR RELAYS
6ES7590-1AE80-0AA0
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
DIN RAIL FOR MOUNTING OF SMALL COMPONENTS SUCH AS CLAMPS, FUSES OR RELAYS2 X SIMATIC S7-1500, FRONTCONNECTOR SCREW-TYPE, 40PIN, FOR 35MM WIDE MODULES, INCL. 4
JUMPERS, AND CABLE STRAP6ES7592-1AM00-0XB0
1 X SIMATIC S7, MEMORY CARD FOR S7-1X00 CPU/SINAMICS, 3,3 V FLASH, 24 MBYTE 6ES7954-8LF01-0AA0
1 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M
6XV1870-3RH60
► Additional
► Drive TechnologiesSystem requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: SIMATIC STEP 7 Professional V12 SP1 necessary
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 55 Industry Sector
Technical note: SIMATIC STEP 7 Professional V12 SP1 necessary
Order number: 6ES7513-1AL00-4AB0
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC S7-1513 PN
► Quick start intoautomation
► Engineering Software
► Energy Efficiency
1x SIMATIC S7-1500, Rail 480 MM
1x ETHERNET-Cable1x CPU 1513-1 PN
1x DIGITAL-OUTPUT MODULEDQ 32 X DC24V / 0 5A
1x DIGITAL-INPUT MODULEDI 32 X DC24V PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
DQ 32 X DC24V / 0,5ADI 32 X DC24V
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
1x Memory Card 2x Front Connector1x Power Supply
When analog or PROFIBUS Periphery is needed –we recommend 6ES7516-3AN00-4AB1
(package with SIMATIC S7-1516 PN/DP)
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 56 Industry SectorOverview / List / Graphic / Cabinet
24 MB2x Front Connector
40-PolleInput AC 120/230V; Output.: DC 24V, 8A
For engineering SIMATIC STEP 7 Professional V12 SP1 is absolutely necessary
TIA Portal siemens.com/tia-portal/details
SIMATIC S7-1516 PN/DPAvailable until 31th December 2014
1 X SIMATIC PM 1507 24 V/8 A STABILIZED POWER SUPPLY INPUT: 120/230 V AC OUTPUT: 24 V/8 A DC 6EP1333-4BA001 X SIMATIC S7-1500, CPU 1516-3 PN/DP, WITH WORKING MEMORY 1 MB FOR PROGRAM ,
5 MB FOR DATA, 1. INTERFACE, PROFINET IRT WITH 2 PORT SWITCH, 2. INTERFACE, ETHERNET, 3. INTERFACE, PROFIBUS, 10 NS BIT-PERFORMANCE, SIMATIC MEMORY CARD NECESSARY
6ES7516-3AN00-0AB0
1 X SIMATIC S7-1500 DIGITAL INPUT MODULE DI32 X DC24V 32 CHANNELS IN GROUPS OF 16; 6ES7521-1BL00-0AB0
Available until 31th December, 2014
► Quick start intoautomation
► Engineering Software
► Energy Efficiency
1 X SIMATIC S7 1500, DIGITAL INPUT MODULE DI32 X DC24V, 32 CHANNELS IN GROUPS OF 16; 6ES7521 1BL00 0AB01 X SIMATIC S7-1500, DIGITAL OUTPUT MODULE DQ 32 X 24VDC/0.5A; 32 CHANNELS 6ES7522-1BL00-0AB01 X SIMATIC S7-1500, ANALOG INPUT MODULE AI 8 X U/I/RTD/TC, 16 BITS OF RESOLUTION,
ACCURACY 0.3 %; 8 CHANNELS 6ES7531-7KF00-0AB0
1 X SIMATIC S7-1500, ANALOG OUTPUT MODULE AQ 4 X U/I ST; 16 BITS OF RESOLUTION,ACCURACY 0.3 %; 4 CHANNELS IN GROUPS OF 4;
6ES7532-5HD00-0AB0
1 X SIMATIC S7-1500 MOUNTING RAIL 482 MM (APPR 19 INCH) INCL GROUNDING ELEMENT INTEGRATED 6ES7590-1AE80-0AA0 PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
1 X SIMATIC S7 1500, MOUNTING RAIL 482 MM (APPR. 19 INCH) INCL. GROUNDING ELEMENT, INTEGRATED DIN RAIL FOR MOUNTING OF SMALL COMPONENTS SUCH AS CLAMPS, FUSES OR RELAYS
6ES7590 1AE80 0AA0
1 X SIMATIC S7, MEMORY CARD FOR S7-1X00 CPU/SINAMICS, 3,3 V FLASH, 24 MBYTE 6ES7954-8LF01-0AA04 X SIMATIC S7-1500, FRONTCONNECTOR SCREW-TYPE, 40PIN, FOR 35MM WIDE MODULES 6ES7592-1AM00-0XB01 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M6XV1870-3RH60
1 X SIMATIC STEP 7 Professional – Software for Training 1er Lizenz (Details slide 14) 6ES7822-1AA03-4YA5► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: SIMATIC STEP 7 Professional V12 SP1 necessary
g ( )
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 57 Industry Sector
Technical note: SIMATIC STEP 7 Professional V12 SP1 necessary
Order number: 6ES7516-3AN00-4AB3
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC S7-1516 PN/DPAvailable until 31th December 2014Available until 31th December, 2014
► Quick start intoautomation
► Engineering Software
► Energy Efficiency
1x Power Supply Input AC: 120/230V; Output DC: 24V 8A
1x CPU 1516 PN/DP
1x DIGITAL-OUTPUT MODULEDQ 32 X DC24V/0 5A
1x DIGITAL-INPUT MODULEDI 32 X DC24V
1x ANALOG-OUTPUT MODULEAQ 4 X U/I ST
1x ANALOG-INPUT MODULEAI 8 X U/I/RTD/TC PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Output DC: 24V, 8ADQ 32 X DC24V/0,5ADI 32 X DC24V AQ 4 X U/I STAI 8 X U/I/RTD/TC
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
1x Memory Card 24 MB
4x Front Connector40-Pole
1x SIMATIC S7-1500, Rail 480 MM
1x ETHERNET-Cable
SIMATIC STEP 7 Professional –Software for Training 1er Lizenz
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 58 Industry SectorOverview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC S7-1516F PN/DP
1 X SIMATIC PM 1507 24 V/8 A STABILIZED POWER SUPPLY INPUT: 120/230 V AC OUTPUT: 24 V/8 A DC 6EP1333-4BA001 X SIMATIC S7-1500F, CPU 1516F-3 PN/DP, WITH WORKING MEMORY 1,5 MB FOR PROGRAM , 5 MB FOR
DATA, 1. INTERFACE, PROFINET IRT WITH 2 PORT SWITCH, 2. INTERFACE, ETHERNET, 3. INTERFACE, PROFIBUS, 10 NS BIT-PERFORMANCE, SIMATIC MEMORY CARD NECESSARY
6ES7516-3FN00-0AB0
1 X SIMATIC S7 1500 DIGITAL INPUT MODULE DI32 X DC24V 32 CHANNELS IN GROUPS OF 16; 6ES7521 1BL00 0AB0► Quick start into
automation
► Engineering Software
► Energy Efficiency
1 X SIMATIC S7-1500, DIGITAL INPUT MODULE DI32 X DC24V, 32 CHANNELS IN GROUPS OF 16; 6ES7521-1BL00-0AB01 X SIMATIC S7-1500, DIGITAL OUTPUT MODULE DQ 32 X 24VDC/0.5A; 32 CHANNELS 6ES7522-1BL00-0AB0
1 X SIMATIC S7-1500, ANALOG INPUT MODULE AI 8 X U/I/RTD/TC, 16 BITS OF RESOLUTION, ACCURACY 0.3 %; 8 CHANNELS
6ES7531-7KF00-0AB0
1 X SIMATIC S7-1500, ANALOG OUTPUT MODULE AQ 4 X U/I ST; 16 BITS OF RESOLUTION, ACCURACY 0.3 %; 4 CHANNELS IN GROUPS OF 4;
6ES7532-5HD00-0AB0
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
1 X SIMATIC S7-1500, MOUNTING RAIL 482 MM (APPR. 19 INCH) INCL. GROUNDING ELEMENT, INTEGRATED DIN RAIL FOR MOUNTING OF SMALL COMPONENTS SUCH AS CLAMPS, FUSES OR RELAYS
6ES7590-1AE80-0AA0
1 X SIMATIC S7, MEMORY CARD FOR S7-1X00 CPU/SINAMICS, 3,3 V FLASH, 24 MBYTE 6ES7954-8LF01-0AA04 X SIMATIC S7-1500, FRONTCONNECTOR SCREW-TYPE, 40PIN, FOR 35MM WIDE MODULES 6ES7592-1AM00-0XB01 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M6XV1870-3RH60 ► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1, Windows 8.132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: SIMATIC STEP 7 Professional V13 necessary
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 59 Industry Sector
Technical note: SIMATIC STEP 7 Professional V13 necessary
Order number: 6ES7516-3FN00-4AB1
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC S7-1516F PN/DP
► Quick start intoautomation
► Engineering Software
► Energy Efficiency
1x Power Supply Input AC: 120/230V; Output DC: 24V 8A
1x CPU 1516F PN/DP
1x DIGITAL-OUTPUT MODULEDQ 32 X DC24V/0 5A
1x DIGITAL-INPUT MODULEDI 32 X DC24V
1x ANALOG-OUTPUT MODULEAQ 4 X U/I ST
1x ANALOG-INPUT MODULEAI 8 X U/I/RTD/TC PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Output DC: 24V, 8ADQ 32 X DC24V/0,5ADI 32 X DC24V AQ 4 X U/I STAI 8 X U/I/RTD/TC
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
1x Memory 4x Front 1x SIMATIC S7 1500
1x ETHERNET
For engineering SIMATIC STEP 7 Professional and Safety Advanced
V13 is absolutely necessary
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 60 Industry SectorOverview / List / Graphic / Cabinet
yCard 24 MBConnector
40-PoleS7-1500, Rail 480 MM
Cable
TIA Portal siemens.com/tia-portal/details
SIMATIC S7-314C-2 PN/DP
1 X SIMATIC S7-300, CPU 314C-2 PN/DP COMP.CPU WITH MPI, 24 DI/16 DO, 4AI, 2AO, 1 PT100, 4 FAST COUNTERS (60 KHZ), INTEGRATED DP INTERFACE, INTEGRATED 24V DC POWER SUPPLY, 192 KBYTE
6ES7314-6EH04-0AB0
1 X SIMATIC S7-300 PS307 IN:120/230 V AC OUT: 24 V DC/5 A 6ES7307-1EA01-0AA0
2 X SIMATIC S7-300, FRONT CONNECTOR 392 WITH SCREW CONTACTS, 40-POLE 6ES7392-1AM00-0AA0► Quick start into
automation
► Engineering Software
► Energy Efficiency
2 X SIMATIC S7 300, FRONT CONNECTOR 392 WITH SCREW CONTACTS, 40 POLE 6ES7392-1AM00-0AA0
1 X SIMATIC S7-300, SIMULATOR MODULE SM 374, FOR SIMULATING 16 INPUTS OR 16 OUTPUTS RESP. 8 INPUTS AND 8 OUTPUTS; 16 SWITCHES, 16 LED
6ES7374-2XH01-0AA0
1 X SIMATIC S7-300, RAIL L=480MM 6ES7390-1AE80-0AA0
1 X SIMATIC S7, MICRO MEMORY CARD FOR S7-300/C7/ET 200S IM151 CPU, 3.3 V NFLASH, 512 KBYTES 6ES7953-8LJ30-0AA0PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Recommended accessory: 6XV1870-3RH60SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Recommended accessory: 6GK1950-0BB00Trainer Package:FASTCONNECT Accessories Kit
1 X SIMATIC S7, PC ADAPTER USB A2 FOR CONNECTION OF S7-200/300/400 C7; WITH USB-CABLE (5M) 6GK1571-0BA00-0AA0
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: STEP 7 V5 5 V11 or V12 required
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 61 Industry Sector
Technical note: STEP 7 V5.5, V11 or V12 required
Order number: 6ES7314-6EH04-4AB3
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC S7-314C-2 PN/DP
► Quick start intoautomation
► Engineering Software
► Energy Efficiency
1x Power Supply PS 307, AC 120/230V; DC 24V, 5A
1x Micro Memory Card 512 KByte
1x CPU314C-2 PN/DP with 192 KByte
SIMULATOR MODULE SM 374
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
memory
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
2x FRONT CONNECTOR
1x Rail L=480mmPC Adapter USB
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 62 Industry Sector
CONNECTORfor SM, 40-Pole
Overview / List / Graphic / Cabinet
USB
TIA Portal siemens.com/tia-portal/details
SIMATIC S7-314C-2 PN/DP Upgrade Package for TIA Portal
Available until 31th December 2014
1 X SIMATIC S7-300, CPU 314C-2PN/DP COMPACT CPU WITH 192 KBYTE WORKING MEMORY, 24 DI/16 DO, 4AI, 2AO, 1 PT100, 4 FAST COUNTERS (60 KHZ), 1. INTERFACE MPI/DP 12MBIT/S, 2. INTERFACE ETHERNET PROFINET, WITH 2 PORT SWITCH, INTEGRATED 24V DC POWER SUPPLY, FRONT CONNECTOR (2 X 40-POLE) AND MICRO MEMORY CARD REQUIRED
6ES7314-6EH04-0AB0
Available until 31th December, 2014
► Quick start intoautomation
► Engineering Software
► Energy Efficiency
1 X SIMATIC S7, MICRO MEMORY CARD FOR S7-300, 3.3 V NFLASH, 512 KBYTES 6ES7953-8LJ30-0AA0
1 X SIMATIC S7-300, DIGITAL MODULE SM 323, OPTICALLY ISOLATED, 16 DI AND 16 DO, 24V DC, 0.5A, AGGREGATE CURRENT 4A, 1 X 40-POLE
6ES7323-1BL00-0AA0
3 X SIMATIC S7-300, FRONT CONNECTOR 392 WITH SCREW CONTACTS, 40-POLE 6ES7392-1AM00-0AA0
1 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45 CAT 6 CROSSED TP CABLE 4X2 6XV1870 3RH60 PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
1 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
6XV1870-3RH60
Recommended accessory: 6GK1950-0BB00Trainer Package:FASTCONNECT Accessories Kit ► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1 , WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: STEP 7 V5 5 V11 or V12 required
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 63 Industry Sector
Technical note: STEP 7 V5.5, V11 or V12 required
Order number: 6ES7314-6EH04-4AB4
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC S7-314C-2 PN/DP Upgrade Package for TIA Portal
Available until 31th December, 2014Available until 31th December, 2014
► Quick start intoautomation
► Engineering Software
► Energy Efficiency
1x Micro MemoryCard
3x FRONT CONNECTOR
1x CPU314C-2 PN/DP ith 192 KB t
ETHERNET-cable6XV1870-3RH60
1x Digital Modul SM 323 16 DI and 16 DO PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Card 512 KByte
CONNECTORfor SM, 40-Pole
with 192 KBytememory
6XV1870 3RH60SM 323, 16 DI and 16 DO, DC 24V, 0,5A, 40 POLE
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 64 Industry SectorOverview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC S7-315F-2 PN/DP – PROFINET
1 x Rail L=480mm 6ES7390-1AE80-0AA0
1 x Power Supply PS 307, AC 120/230V; DC 24V, 5A 6ES7307-1EA01-0AA0
1 x CPU315F-2 PN/DP with 512 KByte, Working Memory 6ES7315-2FJ14-0AB0► Quick start into
automation
► Engineering Software
► Energy Efficiency
1 x Micro Memory Card 512 KByte 6ES7953-8LJ30-0AA0
1 x Digital Module Input/Output SM 323, 16 DE and 16 DA, C 24V, 0,5A, 40 POLIG 6ES7323-1BL00-0AA0
1 x Front Connector for SM, 40-Pole 6ES7392-1AM00-0AA0
1 x Analog Module Input/Output SM 334, 4 AE/2 AA, 20-Pole 6ES7334-0CE01-0AA0
1 F t C t f SM 20 P l 6ES7392 1AJ00 0AA0 PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
1 x Front Connector for SM, 20-Pole 6ES7392-1AJ00-0AA0
1 x Distributed Safety V5.4, Floating License 6ES7833-1FC02-0YA5Complementary to:
Trainer Package F-Technology S7-300 – PROFINET6ES7326-2FS00-4AB1
Recommended accessory: 6XV1870-3RH60SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Recommended accessory: 6GK1950-0BB00Trainer Package:FASTCONNECT Accessories Kit ► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: STEP 7 V5 5 V11 or V12 requiredCore product for vocational W ld C I d i l C l
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 65 Industry Sector
Technical note: STEP 7 V5.5, V11 or V12 required
Order number: 6ES7315-2FH14-4AB1
Overview / List / Graphic / Cabinet
World Cup Industrial ControlMore: www.siemens.com/worldskills
TIA Portal siemens.com/tia-portal/details
SIMATIC S7-315F-2 PN/DP – PROFINET
► Quick start intoautomation
► Engineering Software
► Energy Efficiency
1x Rail L = 480mm1x Power Supply PS 307, AC 120/230V; DC 24V, 5A
1x CPU315F-2 PN/DP with 512 KByte Memory
1x Micro Memory Card 512 KByte
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
1x Front Connector for SM, 40-Pole
1x Digital Module SM 323, 16 DI and 16 DO, DC 24V,0,5A, 40-Pole
1x Analog Module SM 334,4 AE/2 AA, 20-Pole
1x Front Connector for SM, 20-Pole
1x Distributed Safety V5.4,Floating License
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 66 Industry Sector
Recommended accessory: 6XV1870-3RH60SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Recommended accessory: 6GK1950-0BB00Trainer Package:FASTCONNECT Accessories Kit
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC S7-300 F-Technology Safety In-/Output Module
1 x F-Digital Input SM 326, 24 DE 6ES7326-1BK02-0AB0
1 x F-Digital Output SM 326, 8 DA; DC 24V, 2A 6ES7326-2BF41-0AB0
1 x Separator Module 6ES7195-7KF00-0XA0
C f S S► Quick start into
automation
► Engineering Software
► Energy Efficiency
2 x Front Connector for SM, 40-Pole 6ES7392-1AM00-0AA0
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Complementary to:Trainer Package
CPU315F-2 PN/DP – PROFINET6ES7315-2FH14-4AB1
Complementary to:Trainer Package
S7-mEC - modular Embedded6ES7677-1FD00-4AB1
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, Windows XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: Safety CPU required
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 67 Industry Sector
Technical note: Safety-CPU required
Order number: 6ES7326-2FS00-4AB1
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC S7-300 F-Technology
► Quick start intoautomation
► Engineering Software
► Energy Efficiency
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
1x F-Digital Input SM 326,24 DE
1x F-Digital Output SM 326,
8 DA DC 24V 2A
1x Separator Module2x Front Connector for SM, 40-Pole
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
24 DE 8 DA; DC 24V, 2A
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 68 Industry SectorOverview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC ET 200S PLC IM 151-8 F PN/DP
Recommended accessory: 6XV1870-3RH60SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
1 X IM151-8 F-CPU PN/DP192 KB PN-Interface with 3 RJ45 Ports 6ES7151-8FB01-0AB01 X DP-MASTER INTERFACE 6ES7138-4HA00-0AB02 X POWERMODUL PM-E, DC 24V/8A RO FOR ELECTRONIC MODULE W. DIAGNOSIS 6ES7138-4CA80-0AB020 X (5 X 4) DI HIGH FEATURE DC 24V 6ES7131-4BD01-0AB0 ► Quick start into
automation
► Engineering Software
► Energy Efficiency
Complementary to:TP F-Technik ET 200S PN -
PROFINET
Recommended accessory: 6GK1950-0BB00Trainer Package:FASTCONNECT Accessories Kit
20 X (5 X 4) DO HIGH FEATURE DC 24V/0,5A, 6ES7132-4BD00-0AB01 X 6ES7138-4GA50-0AB04 X (2 X 2) AI U HIGH FEATURE 6ES7134-4LB02-0AB02 X AO U HIGH FEATURE 6ES7135-4LB02-0AB01 X COUNT 24V/100KHZ, 6ES7138-4DA04-0AB015 X (3 X 5) 5 UNIVERSAL TERMINALMODULE TM E15S26 A1 6ES7193 4CA40 0AA0
ELEKTRONIC MODULE, 4SI IO-LINK, 4 POINT TO POINT INTERFACES
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
6ES7138-4FS01-4AB115 X (3 X 5) 5 UNIVERSAL-TERMINALMODULE TM-E15S26-A1 6ES7193-4CA40-0AA02 X TERMINALMODUL TM-P15S23-A0 6ES7193-4CD20-0AA01 X MICRO MEMORY CARD 512 KBYTE, 6ES7953-8LJ30-0AA01 X STAND.SECTIONAL RAIL . 483MM (19"), 6ES5710-8MA111 X S7 DISTRIBUTED SAFETY V5.4 6ES7833-1FC02-0YA5 ► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: STEP 7 V5 5 V11 or V12 required
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 69 Industry Sector
Technical note: STEP 7 V5.5, V11 or V12 required
Order number : 6ES7151-8FB00-4AB1
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC ET 200S PLC IM 151 F PN/DP
► Quick start intoautomation
► Engineering Software
► Energy Efficiency
1x Micro Memory Card 512 KByte
1x Distributed Safety V5.4,Floating License
1x Standard Section Rail 35mm, L=483mm for 19"-Schränke
15 (3 X 5) UNIVERSAL TERMINALMODULE TM-E15S26-A12 X TERMINALMODUL TM-P15S23-A0
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
1 IM151 8 F CPU PN/DP 1 DP M t I t f 1 I/O Li k M t
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
2 X POWERMODUL PM-E, 20 (5 X 4) DI HIGH FEATURE DC 24V20 (5 X 4) DO STANDARD DC 24V/0,5A,2 DO RELAY(SWITCH) 4 (2 X 2) AI U HIGH FEATURE 2 AO U HIGH FEATURE
1 x IM151-8 F-CPU PN/DP 1x DP-Master Interface 1 x I/O-Link Master
Recommended accessory: 6XV1870-3RH60SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Recommended accessory: 6GK1950-0BB00
Recommended accessory: 6EP1332-2BA20 SITOP PSU100S STABILIZED POWER SUPPLY INPUT: AC 120/230 V OUTPUT: DC 24 V/2,5 AAlternativ: 6EP1333-2BA20SITOP PSU100S STABILIZED POWER SUPPLY INPUT: AC 120/230 V OUTPUT: DC 24 V/5 A
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 70 Industry Sector
1 X COUNT 24V/100KHZ
Overview / List / Graphic / Cabinet
Trainer Package: FASTCONNECT Accessories Kit
TIA Portal siemens.com/tia-portal/details
SIMATIC ET 200S PN – PROFINET
1 x ET 200S, Digital Input, 2DI HF, DC 24V, 5ST. (Total 10 DE) 6ES7131-4BB01-0AB0
1 x ET 200S, Digital Output, 2DO HF,DC24V, 0,5A, 5ST. (Total 10 DA) 6ES7132-4BB01-0AB0
2 x ET 200S, Power Module. PM-E, DC 24-48V 6ES7138-4CA50-0AB0
S S S ( ) S C► Quick start into
automation
► Engineering Software
► Energy Efficiency
2 x ET 200S, Terminal Module, TM-E15S24-A1 5ST. (Total 10) 6ES7193-4CA20-0AA0
2 x ET 200S, Terminal Module, TM-P15S23-A0 6ES7193-4CD20-0AA0
1 x ET 200S, Interface Module IM151-3 PN HF 2 Bus Interfacing about RJ45 6ES7151-3BA23-0AB0
1 x Micro Memory Card 64 KByte 6ES7953-8LF30-0AA0
1 x Stand Sectional Rail 35mm L 483mm for 19" Cabinets 6ES5710 8MA11 PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Complementary to: Trainer Package F-Technology ET 200S PN - PROFINET
6ES7138-4FS00-4AB1
Recommended accessory: 6XV1870-3RH60SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMB-LED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Recommended accessory: 6GK1950-0BB00Trainer Package:FASTCONNECT Accessories Kit
1 x Stand Sectional Rail 35mm, L=483mm for 19"-Cabinets 6ES5710-8MA11
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: None available
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 71 Industry Sector
Technical note: None available
Order number: 6ES7151-3BA20-4AB1
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC ET 200S PN
► Quick start intoautomation
► Engineering Software
► Energy Efficiency
1x Micro Memory Card 64 KByte
1x ET 200S, Digital Input, 2DI HF, DC 24V, 5ST. (Total 10 DE)
1x ET 200S, Digital Output, 2DO HF,DC24V, 0,5A, 5ST. (Total 10 DA)
1x Stand Sectional Rail 35mm,L=483mm for 19"-Cabinets
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
2x ET 200S, Power Module.PM-E, DC 24-48V
2x ET 200S, Terminal Module, TM-E15S24-A1 5ST. (Total 10)
2x ET 200S, Terminal Module, TM-P15S23-A0
1x ET 200S, Interfacing Module IM151-3 PN HF two bus connections at RJ45
Recommended accessory: 6XV1870-3RH60 Recommended accessory: 6GK1950-0BB00
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 72 Industry Sector
ySIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
yTrainer Package:FASTCONNECT Accessories Kit
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC ET 200S F-Technology Safety In-/Output Module
1 x ET 200S, F-Digital Input, 4/8 F-DI, DC 24V 6ES7138-4FA04-0AB0
1 x ET 200S, F-Digital Output, 4 F-DO, DC 24V/2A 6ES7138-4FB03-0AB0
1 x ET 200S, F-Relay Output 1 F-RO DC 2 Closer 24V/5A AC24V..230/5A 6ES7138-4FR00-0AA0
S S S CG► Quick start into
automation
► Engineering Software
► Energy Efficiency
3 x ET 200S, Terminal Module, TM-E30S44-01 6ES7193-4CG20-0AA0
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Complementary to: Trainer PackageET 200S PN - PROFINET6ES7151-3BA20-4AB1
Complementary to: Trainer PackageET 200S CPU IM 151 PN/DP
6ES7151-8FB00-4AB1► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: Safety CPU required
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 73 Industry Sector
Technical note: Safety-CPU required
Order number: 6ES7138-4FS01-4AB1
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC ET 200S F-Technology
► Quick start intoautomation
► Engineering Software
► Energy Efficiency
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
1x ET 200S, F-Digital Input,
1x ET 200S, F-Digital Output,4 F DO DC 24V/2A
3x ET 200S, Terminal Module,TM E30S44 01
1x ET 200S, 1 Relaisausgang 1 F RO DC (2 S hli ß )
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
4/8 F-DI, DC 24V 4 F-DO, DC 24V/2A TM-E30S44-011 F-RO DC (2 Schließer)24V/5A AC24V..230/5A
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 74 Industry SectorOverview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC S7-315T Technology-PLC Motion Control
1 x Rail L=480mm 6ES7390-1AE80-0AA01 x power supply PS 307, AC 120/230V; DC 24V, 5A 6ES7307-1EA01-0AA01 x 315T-3 PN/DP with 384 KByte main memory 6ES7315-7TJ10-0AB0 2 x Front connector for CPU, 40-Pole 6ES7392-1AM00-0AA0 ► Quick start into
automation
► Engineering Software
► Energy Efficiency
1 x Micro Memory Card 8 MByte 6ES7953-8LP31-0AA01 x Digital Module SM 323, 16 DE and 16 DA, DC 24V, 0,5A, 40-Pole 6ES7323-1BL00-0AA01 x SIMATIC S7-300, Interface Module IM174 6ES7174-0AA10-0AA0
for connecting analog drives and Step Drives via isochronous PROFIBUS 1 x Front Connector for IM, 40-Pole- 6ES7392-1AM00-0AA0
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
,1 x SIMATIC NET, connection cable 830-2 for PROFIBUS, 6XV1830-2AH30
preassembled cable, two Sub-D-connectors 9-Pole, switchable terminating resistors, 3m1 x SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, 6XV1870-3RH60
PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M1 x SIMATIC S7, S7-Technology V4.2, SP3 Optional Package for STEP 7, Floating License 6ES7864-1CC42-0YA5
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, Windows XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: STEP 7 V5 5 required
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 75 Industry Sector
Technical note: STEP 7 V5.5 required
Order number: 6ES7315-7TJ10-0AB1
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC S7-315T Technology-PLC Motion Control
► Quick start intoautomation
► Engineering Software
► Energy Efficiency
1x Power Supply PS 307, AC 120/230V; DC 24V, 5A
1x 315T-3 PN/DPwith 384 KByteWorking Memory
1x Rail L=480mm
1x Micro Memory Card 8 MByte
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
3x Front Connector for SM, 40-Pole
1x Digital Module SM 323, 16 DI and 16 DO, DC 24V, 0,5A, 40-Pole
1x SIMATIC S7-300, Interface Module IM174, Connection for analogDrives and Step Drivesvia isochronous PROFIBUS
1x SIMATIC S7, S7-Technology V4.2 SP3 Options Package at STEP 7, Floating License
1x ETHERNETCable ► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 76 Industry Sector
via isochronous PROFIBUS Floating License
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC S7-mEC – Modular Embedded
1 X EC31-RTX F, 1 GB RAM, 4 GB FLASH DISK WITH PREINSTALLED SW: WINDOWS XP EMBEDDED; SIMATIC WINAC RTX F, SIMATIC SOFTNET-S7/ LEAN, INTERFACES: 1. IF: 2X PROFINET, 2. IF: 1X FAST ETHERNET, 3. IF: 2 X USB, MMC SLOT, DOCUMENTATION ON CD/DVD, RESTORE CD/DVD
6ES7677-1FD10-0FB0
1 X EXTENSION MODULE FOR UP TO 3 ADDITIONAL PCI-104 CARDS, (USING OF PC/104 PLUS CARDS WITH ADDITIONAL ADAPTER POSSIBLE)
6ES7677-1DD40-1AA0
1 X EXTENSION MODULE FOR ADDITIONAL CONNECTORS 2 X USB 1 X ETHERNET GB 1 X COM 1 X DVI I 1 X SLOT CF 1 X SLOT 6ES7677 1DD50 2AA0► Quick start into
automation
► Engineering Software
► Energy Efficiency
1 X EXTENSION MODULE FOR ADDITIONAL CONNECTORS 2 X USB, 1 X ETHERNET GB, 1 X COM, 1 X DVI-I, 1 X SLOT CF 1 X SLOT SD/MMC
6ES7677-1DD50-2AA0
1 X SIMATIC S7-300, RAIL L=2000MM 6ES7390-1BC00-0AA01 X POWER SUPPLY PS307 INPUT: 120/230V AC OUTPUT: DC 24 V DC/10 A 6ES7307-1KA02-0AA01 X DIGITAL MODULE SM 323, 16 DI AND 16 DO, 24V DC, 0.5A, AGGREGATE CURRENT 4A 6ES7323-1BL00-0AA01 X ANALOG MODULE SM 334, 4 AI/2 AO, 1 X 20 POLE 6ES7334-0CE01-0AA0
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
1 X SIMULATOR MODULE SM 374, FOR SIMULATING 16 INPUTS OR 16 OUTPUTS RESP 8 INPUTS AND 8 OUTPUTS; 16 SWITCHES, 16 LED
6ES7374-2XH01-0AA0
1 X FRONT CONNECTOR WITH SCREW CONTACTS, 40-POLE 6ES7392-1AM00-0AA01 X FRONT CONNECTOR WITH SCREW CONTACTS, 20-POLE 6ES7392-1AJ00-0AA01 X WINAC ODK V4.2, SINGLE LICENSE FOR 1 INSTALL., E-SW, SW AND DOCU ON CD 6ES7806-1CC03-0BA01 X F PROGRAMMING TOOL DISTRIBUTED SAFETY V5.4, FLOATING LICENSE FOR 1 USER 6ES7833-1FC02-0YA5
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements:
Sales note:
32 BIT: Windows 7 Professional, Ultimate SP1, WINDOWS XP Professional SP3
For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: STEP 7 V5 5 V11 or V12 required Complementary to: Trainer Package
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 77 Industry Sector
Technical note: STEP 7 V5.5, V11 or V12 required
Order number: 6ES7677-1FD00-4AB1
p y gF-Technology S7-300 –
PROFINET 6ES7326-2FS00-4AB1
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC S7-mEC – Modular Embedded
SIMATIC S7-mECCombines the advantages of S7-Controller with a PC-based control PC-based control solution. You can automate a variety of tasks on a hardware solution will be integrated. S7-mEC is characterized by its modular construction method in the S7-300-design and with S7-300 modules. HW base is the latest PC technology.
► Quick start intoautomation
► Engineering Software
► Energy Efficiency
1x Power Supply PS 307, AC 120/230V; DC 24V 10A
1x EC31-RTX F 1x Analog Module SM 334,4 AE/2 AA 20 Pole
1x Digital Module SM 323, 16 DI and 16 DO DC 24V
1 x Simulator ModuleSM 374 PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
AC 120/230V; DC 24V, 10A 4 AE/2 AA, 20-Pole16 DI and 16 DO, DC 24V,0,5A, 40-Pole
SM 374
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
1x Rail L = 2000mm1x Front Connector for SM, 40-Pole
1x Front Connector for SM, 20-Pole
1x Distributed Safety V5.4,Floating License
1x WINAC ODK V4.2, Single License
Recommended accessory: 6XV1870-3RH60 Recommended accessory: 6GK1950-
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 78 Industry Sector
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
0BB00Trainer Package:FASTCONNECT Accessories Kit
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC WinAC RTX F 2010 PC-based Control
1x WinAC Basis RTX F 2010 (6ES7671-1RC08-0YA0)
1x CP 5622 PCI EXPRESS X1-CARD FOR CONNECTING A PG OR PCWITH PCI EXPRESS-BUS TO PROFIBUS OR MPI (6GK1562-2AA00)
Single License for 1 Installation► Quick start into
automation
► Engineering Software
► Energy Efficiency
Single License for 1 Installation
Runtime-SW, SW and
Documentation on DVD
SW-Class A, 3-speaking (D,E,F)
Reference-Hardware: SIMATIC PC, SIMATIC S7-mECPLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Reference Hardware: SIMATIC PC, SIMATIC S7 mEC
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 32 BIT: Windows 7 Professional, Ultimate SP1, Windows XP Professional SP3, INTERVALZERO RTX
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: License Key on USB-Stick
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 79 Industry Sector
Technical note: License Key on USB-Stick
Order number: 6ES7671-1RC08-0YS0
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Industrial Communication
• Overview
• SINEMA Network Monitoring Software
• CP343-1 Advanced
• Switch X208
• Security Switch
• FASTCONNECT Accessories Kit
• IWLAN
• Development Kit
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 80 Industry SectorOverview / List / Graphic / Cabinet
Training curriculums siemens.com/sce/modules
SINEMA V12 – Network Monitoring Software
► Quick start into automation
► Engineering Software
► Energy Efficiency6 X SINEMA SERVER BASIC-50 V12 6GK1781-1BA12-0AA0SINEMA SERVER 50 V12 NETWORK MONITORING SOFTWARE FOR 50 IP DEVICES VIA WEB BROWSER AUTOM. RECOGNITION+DISPLAY OF IE/PNIO/WLAN DEVICES+ TOPOLOGY IN NET. HMI INTEGRATION VIA OPC/HTTP(S). REPORTING, STATISTICS + ALARMS SERVER OVERVIEW + ADAPTABLE PROFILES, SW, MANUAL (DVD) + SINGLE LICENSE (USB) CLASS A LANGUAGES (G E FR CH) WIN XP+SP3 WIN 7+SP1
TIA PORTAL
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automationMANUAL (DVD) + SINGLE LICENSE (USB) CLASS A, LANGUAGES (G,E,FR,CH); WIN XP+SP3 WIN 7+SP1 (32/64 BIT) + WIN SERVER 2008 R2+SP1
Check HW Compatibility for TIA Portal More
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
SW functional identical to the industrial version
for TIA Portal More
► Additional
► Drive TechnologiesSystem requirements: 64 BIT: WINDOWS 7 Professional, Ultimate SP132 BIT: WINDOWS 7 Professional, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: Authorization on USB Stick
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 81 Industry Sector
Technical note: Authorization on USB-Stick
Order number: 6GK1950-0BB06
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC CP343-1 Advanced
1 x SIMATIC CP 343-1 Advanced 6GK7343-1GX31-0XE0SIMATIC NET CP 343-1 ADVANCED; FOR CONNECTING SIMATIC S7-300 CPU TO IND. ETHERNET; PROFINET I/O CONTROLLER AND/OR IO-DEVICE; RT AND IRT MRP, PROFINET CBA; TCP/IP; ISO,UDP,S7-COM,S5-KOMP. COM., (SEND/RECEIVE) W. FETCH/WRITE WITH AND WITHOUT RFC 1006, MULTICAST DIAGNOSIS EXTENSION, SNMP DHCP FTP CLIENT/SERVER E MAIL GIGABIT SS1X RJ45 (10/100/1000) PROFINET SS 2X
► Quick start into automation
► Engineering Software
► Energy Efficiency
SNMP, DHCP, FTP CLIENT/SERVER, E-MAIL, GIGABIT-SS1X RJ45 (10/100/1000) PROFINET-SS 2X RJ45(10/100MBIT) PROFINET CBA; SECURITY (FIREWALL/VPN); PROFIENERGY
C
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Recommended accessory: 6XV1870-3RH60SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Recommended accessory: 6GK1950-0BB00Trainer Package:FASTCONNECT Accessories Kit
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Ultimate SP132 BIT: WINDOWS 7 Professional, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: None available
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 82 Industry Sector
Technical note: None available
Order number: 6GK1950-0AA07
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Switch Technologies – Scalance X208 / SIMATIC NET
1 x SCALANCE X208 6GK5208-0BA10-2AA3SIMATIC NET, SCALANCE X208, MANAGED IE SWITCH, 8 X 10/100MBIT/S RJ45 PORTS, LED DIAGNOSTICS, ERROR SIGNAL CONTACT WITH SET BUTTON, REDUNDANT POWER SUPPLY, PROFINET-IO DEVICE, NETWORK MANAGEMENT, INTEGRATED REDUNDANCY MANAGER, INCL ELECTRONIC MANUAL ON CD
► Quick start into automation
► Engineering Software
► Energy Efficiency
INCL. ELECTRONIC MANUAL ON CD
1 x SIMATIC NET, C-PLUG 6GK1900-0AB00SIMATIC NET, C- PLUG REPLACEABLE , FOR SIMPLE DEVICE EXCHANGE IN CASE OF FAILURE, FOR STORAGE OF CONFIGURATION OR USER DATA, APPLICATION IN SIMATIC NET PRODUCTS WITH C-PLUG SLOT
C
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Recommended accessory: 6XV1870-3RH60SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Recommended accessory: 6GK1950-0BB00Trainer Package:FASTCONNECT Accessories Kit
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Ultimate SP132 BIT: WINDOWS 7 Professional, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: None availableCore product for vocational W ld C I d i l C l
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 83 Industry Sector
Technical note: None available
Order number: 6GK1950-0BB02
Overview / List / Graphic / Cabinet
World Cup Industrial ControlMore: www.siemens.com/worldskills
TIA Portal siemens.com/tia-portal/details
Industrial Security Switch Technologies – SCALANCE S623
2 x SIMATIC NET SCALANCE S 623 6GK5623-0BA10-2AA3SCALANCE S 623 MODULE FOR PROTECTION OF UNITS AND NETWORKS IN AUTOMATION TECHNOLOGY AND FOR PROTECTION OF INDUSTRIAL COMMUNICATION VIA VPN AND FIREWALL; ADDITIONAL DMZ-PORT FOR CONNECTING AN ADDITIONAL NETWORK ADDITIONAL FUNCTIONS: ADDRESS CONVERSION ► Quick start into
automation
► Engineering Software
► Energy Efficiency
1 x SOFTNET SECURITY CLIENT V4 + HF1 6GK1704-1VW04-0AA0SIMATIC NET INDUSTR. ETHERNET SOFTNET SECURITY CLIENT V4+HF1 SW FOR CONFIGURING SAFE IP BASED VPN-CONNECTIONS FROM PC/PG TO NETWORK SEGMENTS, WHICH ARE FUSED BY SCALANCE S, SINGLE LICENSE F.1 INSTALLATION R-SW, SW + ELECTR. MAN. ON CD SW 2-LANGUAGES (G,E); MANUAL 5-LANG. (G, E, F, I, S) FOR WINDOWS 7 ULTIMATE, PROFESSIONAL, AND 32BIT WINDOWS XP PRO+SP3
C
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
2 x SIMATIC NET, C-PLUG 6GK1900-0AB00SIMATIC NET, C- PLUG REPLACEABLE , FOR SIMPLE DEVICE EXCHANGE IN CASE OF FAILURE, FOR STORAGE OF CONFIGURATION OR USER DATA
Recommended accessory: 6XV1870-3RH60SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Recommended accessory: 6GK1950-0BB00Trainer Package:FASTCONNECT Accessories Kit
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Ultimate SP132 BIT: WINDOWS 7 Professional, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: None available
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 84 Industry Sector
Technical note: None available
Order number: 6GK1950-0BB03
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SIMATIC NET – IWLAN
1 x 6GK1782-0AA00-6AA0SINEMA E STANDARD ENGINEERING SOFTWARE FOR PLANNING + AUTOPLACEMENT + CONFIGURATIONSIMULATION + OPTIMIZATION + SITE SURVEY OF WLAN SOFTWARE + MANUAL ON CD SINGLE LICENSE ON USB1 x 6GK5788-2AA60-6AA0 (ROW Version) or 6GK5788-2AA60-6AB0 (USA Version)SIMATIC NET IWLAN DUAL ACCESS POINT SCALANCE W788 2RR 2 RADIO INTERFACES IEEE 802 11 B/G/A/H INDUSTRIAL
► Quick start into automation
► Engineering Software
► Energy Efficiency
SIMATIC NET, IWLAN DUAL ACCESS POINT SCALANCE W788-2RR, 2 RADIO INTERFACES, IEEE 802.11 B/G/A/H, INDUSTRIAL WIRELESS LAN WITH RAPID ROAMING (IWLAN RR), 2.4/5 GHZ, UP TO 54MBIT/S, WPA2/802.11I/11E, 2XANT 795-4MR, IP67 HYBRID PLUG CONNECTOR, MANUAL ON CD2 x 6GK5747-1AA60-6AA0 (ROW Version) or 6GK5747-1AA60-6AB0 (USA Version)SIMATIC NET, IWLAN RR ETHERNET CLIENT MODULE SCALANCE W747-1RR, 1 RADIO INTERFACE, IEEE 802.11B/G/A/H, INDUSTRIAL WIRELESS LAN WITH RAPID ROAMING (IWLAN RR), INCLUDES 2XANT 795-4MR, IP67 HYBRID PLUG CONNECTOR 3 SIMATIC NET C PLUG 6GK1900 0AB00 C
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
3 x SIMATIC NET, C-PLUG 6GK1900-0AB001 x 6GK1907-0DC10-6AA3SIMATIC NET, IE POWER M12 CABLE CONN. PRO - SOCKET FOR CONNECT. OF SCALANCE W-700/X208PRO FOR 24VDC VOLTAGE SUPPLY, 4-POLE, A-CODED, WITH MOUNTING INSTRUCTION, 3 PIECES 20 M 6XV1812-8A SIMATIC NET ENERGY CABLE, 2X0,75
Recommended accessory: 6GK1950-0BB00Trainer Package:FASTCONNECT Accessories Kit
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 32 BIT: Windows Vista Business SP1, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments
Technical note: None available
FASTCONNECT Accessories Kit
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 85 Industry Sector
Technical note: None available
Order number: 6GK1950-0BB04 (ROW-Version) 6GK1950-0BB05 (USA-Version)
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
FASTCONNECT Accessories Kit
1 X 6GK1901-1GA00 FASTCONNECT STRIPPING TOOL
2 X 6GK1901-1BB10-2AB0 SIMATIC NET IE FC RJ45 PLUG 180 2X2, RJ45 PLUG CONNECTOR (10/100MBIT/S) WITH RUGGED METAL HOUSING AND FC CONNECTING METHOD FOR IE FC CABLE 2X2, 180 DGR CABLE OUTLET 1 PACK = 10 PCS
4 X 6GK1901 1BB20 2AA0 SIMATIC NET IE FC RJ45 PLUG 90 2X2 RJ45 PLUG CONNECTOR (10/100MBIT/S) WITH RUGGED METAL► Quick start into
automation
► Engineering Software
► Energy Efficiency
4 X 6GK1901-1BB20-2AA0 SIMATIC NET IE FC RJ45 PLUG 90 2X2, RJ45 PLUG CONNECTOR (10/100MBIT/S) WITH RUGGED METAL HOUSING AND FC CONNECTING METHOD FOR IE FC CABLE 2X2 90 DGR CABLE OUTLET 1 PACK = 1 PCS
1 X 6GK1901-0DB20-6AA8 SIMATIC NET IE FC M12 PLUG PRO M12 PLUG CONNECTOR WITH RUGGED METAL HOUSING AND FC CONNECTING METHOD, WITH AXIAL CABLE OUTLET (D CODED)1 PACKAGE = 8 PCS FOR SCALANCE X208 PRO AND ET 200 PRO PN
G C C CO O SOC O CO C O O SC C / O O C PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
1 X 6GK1907-0DC10-6AA3 M12 CABLE CONN. PRO - SOCKET FOR CONNECTION OF SCALANCE W-700/X208PRO FOR 24V DC VOLTAGE SUPPLY, 4-POLE, A-CODED, WITH MOUNTING INSTRUCTION, 3 PCS
1 X 50 M - 6XV1870-2B FLEXIBLE CABLE, GP 2X2 TP INSTALLATION CABLE WITH FLEXIBLE STRAND, PROFINET TYP B, 4WIRE
2 X 6XV1870-3RH60 SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: None
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: None available
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 86 Industry Sector
Technical note: None available
Order number : 6GK1950-0BB00
Overview / List / Graphic / Cabinet
Development Kit – PROFINET & PROFISAFE
1 x SIMATIC NET, DK-ERTEC 200 PN IO 6GK1953-0BA00 DVELOPMENT PACKAGE FOR PN IO DEVICE BASED ON ERTEC 200 INCL 10 ERTEC 200,EVALUATION BOARD EB 200,TEST APPLICATION SOFTWARE IE FC PLUG
► Quick start into automation
► Engineering Software
► Energy Efficiency
TEST-APPLICATION SOFTWARE,IE FC PLUG, CABLE, STRIPPING TOOL, CP 1616, DK-16XX PN IO, DOKU, V2.0 RT AND IRT FUNCTIONALITY
O S S S PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
More in Internet Here
1 x PROFISAFE-STARTERKIT V3.4 6ES7195-3BF02-0YA0(FOR V1-MODE AND V2-MODE PROFISAFE-DEVICES)
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: Support by ComDeC - Communication Development & Certification www.siemens.com/comdec
More in Internet Here
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 87 Industry Sector
Technical note: Support by ComDeC Communication, Development & Certification www.siemens.com/comdec
Order number: 6ES7195-3BT02-0YA0
Overview / List / Graphic / Cabinet
Development Kit – PROFIsafe-Starterkit Hardware
CP1616• A PCI-card for the usage inside the PC as PROFINET IO Controller (test partner) • The Evaluation Board 200 (EB 200) (for DK-ERTEC 200 PN IO V3.2)• A testing environment for PROFINET IO Devices for custom based applications. ► Quick start into
automation
► Engineering Software
► Energy Efficiency
ERTEC ASICs• For the development of custom based Hardware are included 10x ERTEC 200 (- for DK-ERTEC 200 PN IO V3.2)
PROFINET cabling/ -plugs• For the configuration of a PROFINET cable are per Development Kit two FASTCONNECT plugs, one PROFINET cable, as well as one
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Stripping Tool included.
Power Supply• Every Development Kit contains one Universal AC adaptor to power the Evaluation Boards.
Documentation► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
Documentation• Comprehensive range of documentation in English and German language is included on the CD.
Software• DK-ERTEC 200 PN IO V3.2 • PROFINET Device Stack including application examples in source code to port to the included Evaluation Board;
DK 16xx PN IO;
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 88 Industry Sector
• DK-16xx PN IO;• Firmware to engineer the test partner of the CP1616 to use with Linux or WINDOWS XP, or to port to other PC-based operating systems
Overview / List / Graphic / Cabinet
Development Kit – PROFIsafe-Starterkit DetailsDetails
• Current PROFIsafe-specifications with current PROFIsafe-certificates
• PROFIsafe-driver-Software (as core components of the development kit) Example-GSD-File for STEP 7 (for PROFIBUS DP/PA development kit and DK-ERTEC 200 PN IO) E l P j t f S7 319F (f PROFIBUS DP/PA d l t kit DK ERTEC 200 PN IO)
► Quick start into automation
► Engineering Software
► Energy Efficiency
Example-Project for S7-319F (for PROFIBUS DP/PA development kit DK-ERTEC 200 PN IO)
• GSD-Tools (i.e. GSD Editor and CRC-calculation-Tool)
• iParServer-Software and Tutorial (FB24)
• Tool-Calling-Interface-Example and TutorialPLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
g p
• F-Programming-Guidelines
• Layer stack (V1SL and PN IO)
• Example-Firmware (for PROFIBUS DP/PA development kit and DK-ERTEC 200 PN IO) P j t f l f li ti d l t t i t (f PROFIBUS DP/PA d l t kit d DK
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
Project for example for application development system environment (for PROFIBUS DP/PA development kit and DK-ERTEC 200 PN IO) Slow-Motion-Monitor (for PROFIBUS: PG-PC and CP5613, for PROFINET: PG-CP1616)
• Extensive documentation
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 89 Industry SectorOverview / List / Graphic / Cabinet
Sensor Technologies
• Overview
• SIMATIC VS120 Vision Sensor
• SIMATIC VS130-2 Codeleser
• SIMATIC RF300 RFID System• SIMATIC RF200 RFID System
• SIWAREX weighing systems
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 90 Industry SectorOverview / List / Graphic / Cabinet
Training curriculums siemens.com/sce/modules
SIMATIC Vision Sensor (VS120) – Form Check
► Quick start intoautomation
► Engineering Software
► Energy Efficiency1 x SIMATIC VS120 evaluation device 6GF1018-2AA10
1 x SIMATIC Vision Sensor VS120, documentation package 6GF7021-1AA10
1 x Lens 12mm 6GF9001-1BL01 x Sensor Head white Light C/CS-Mount 6GF2002-8CB
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automationx Sensor Head white Light C/CS-Mount 6GF2002-8CB
1 x SIMATIC VS, Power Supply Cable, 10m 6GF9002-8CA
1 x SIMATIC VS, communications cable, 10m 6GF9002-8CB
1 x SIMATIC VS, Sensor-Cable, 2,5m 6GF9002-8CD
1 x Light red, diffuse 6GF9004-8BA
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
1 x Light red, diffuse 6GF9004 8BA
1 x Light Cable 6GF9002-8CE
1 x Intermediate Ring 6GF9001-1BU
Recommended accessory: 6XV1870-3RH60SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45 CROSSED
Recommended accessory: 6GK1950-0BB00Trainer Package:
► Additional
► Drive Technologies
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: Parameterization with web based HM with Browser starting from IE5.5, JAVA-VM (MS, SUN) STEP 7 V5.4 + SP 5 is required
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Trainer Package:FASTCONNECT Accessories Kit
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 91 Industry Sector
STEP 7 V5.4 SP 5 is required
Order number: 6GF9010-1AA00-0AA0
Overview / List / Graphic / Cabinet
SIMATIC Vision Sensor (VS120) – Form CheckContentContent
► Quick start intoautomation
► Engineering Software
► Energy Efficiency
1x Light red, diffuse6GF9004-8BA
1x Sensor Head C/CS-Mount6GF2002-8CB
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
1x Lens 12mm6GF9001-1BL01
1x SIMATIC VS120 Evaluation device 6GF1018-2AA10
Recommended accessory: 6XV1870-3RH60 Recommended accessory:
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 92 Industry Sector
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
6GK1950-0BB00Trainer Package:FASTCONNECT Accessories Kit
Overview / List / Graphic / Cabinet
SIMATIC Vision Sensor (VS130-2 1D/2D-Code Reading)
1 x SIMATIC VS130-2 evaluation device 6GF1018-3BA
1 x SIMATIC Vision Sensor VS130-2, documentation packages 6GF7031-1BA
1 x Lens 15mm 6GF9001-1BG01
S C/CS G C► Quick start into
automation
► Engineering Software
► Energy Efficiency
1 x Sensor Head White Light C/CS-Mount 6GF2002-8CB
1 x SIMATIC VS, Power Supply Cable, 10m 6GF9002-8CA
1 x SIMATIC VS, Communications-Cable, 10m 6GF9002-8CB
1 x SIMATIC VS, Sensor Cable, 2,5m 6GF9002-8CD
1 x Light red diffuse 6GF9004 8BA
Barcode(1D-Code)
Data Matrix Code(2D-Code)
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
1 x Light red, diffuse 6GF9004-8BA
1 x Light Cable 6GF9002-8CE
1 x Intermediate Ring 6GF9001-1BU
Recommended accessory: 6XV1870-3RH60SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45 CROSSED
Recommended accessory: 6GK1950-0BB00Trainer Package:
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: Parameterization with web based HM with Browser starting from IE5.5, JAVA-VM ( MS, SUN ) STEP 7 V5.4 + SP 5 is required
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Trainer Package:FASTCONNECT Accessories Kit
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 93 Industry Sector
STEP 7 V5.4 SP 5 is required
Order number: 6GF9010-1AB00-0AA0
Overview / List / Graphic / Cabinet
SIMATIC Vision Sensor (VS130-2 1D/2D-Code Reading)ContentContent
► Quick start intoautomation
► Engineering Software
► Energy Efficiency
1x Light red, diffuse6GF9004-8BA
1x Sensor Head C/CS-Mount6GF2002-8CB
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
Recommended accessory: 6XV1870-3RH60 Recommended accessory:
1x Lens 15mm6GF9001-1BG01
1x SIMATIC VS120Evaluation device 6GF1018-2AA10
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 94 Industry Sector
ySIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
y6GK1950-0BB00Trainer Package:FASTCONNECT Accessories Kit
Overview / List / Graphic / Cabinet
SIMATIC RFID – RF200
2 SIMATIC RF200 READER RF240R; RS422-INTERFACE (3964R); WITH INTEGRATED ANTENNA 6GT2821-4AC10
1 RFID COMMUNICATION MODULE RF180C FOR PN; 2 READERS CONNECTABLE; WITHOUT CONNECTING BLOCK FOR PROFINET
6GT2002-0JD00
1 RFID PROFINET- / ETHERNET- CONNECTING BLOCK PUSH-PULL RJ45 FOR RF180C, RF182C 6GT2002-2JD00 ► Quick start intoautomation
► Engineering Software
► Energy Efficiency
1 POWER PLUG PRO, 5-POLE PUSH PULL POWER PLUG FOR ON-SITE MOUNTING (PACKAGING UNIT: 1 PLUG) 6GK1907-0AB10-6AA0
1 IE FC RJ45 PLUG PRO; IP65; FAST CONNECT; IE; RJ45 PUSH PULL PLUG FOR ON-SITE MOUNTING TO IE FC TP CABLE 2X2; (PACKAGING UNIT 1 PLUG)
6GK1901-1BB20-6AA0
2 SIMATIC RF, MV CONNECT. CABLE, PREASSEMBLED, BETWEEN ASM 456, RF160C, RF170C, RF18XC AND READER OR EXTENSION CABLE FOR ASM 456, RF160C, RF170C, RF18XC WITH RF, MV, MOBY PUR, CMG, LENGTH 2 M
6GT2891-4FH20
1 RFID SYSTEMS SOFTWARE & DOCUMENTATION ON DVD, FB/FC FOR SIMATIC, RFID PC LIBRARIES, RFID TOOLS 6GT2080-2AA20 PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
& , , , 6GT2080 2AA20
5 MOBY D / RF300 ISO / RF200 TRANSPONDER MDS D400 ISO-CARD, 2000 BYTE (NETTO) 6GT2600-4AD00
5 MOBY D / RF300 ISO MOBILE DATA STORAGE MDS D460, ACCORDING TO ISO 15693; 2000 BYTE FRAM; 6GT2600-4AB00
5 MOBY D / RF300 ISO SPACER FOR MDS D160 / MDS D460; DIAMETER 20 MM; HEIGHT 15 MM 6GT2690-0AG00
5 RF200 / RF300 ISO TRANSPONDER MDS D423; TRANSPONDER IN AND ON METAL ACCORDING;2000 BYTE FRAM 6GT2600-4AA00► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: None available
; ; 6GT2600 4AA00
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 95 Industry Sector
Technical note: None available
Order number: 6GT2096-3AA00-0AA0
Overview / List / Graphic / Cabinet
SIMATIC RFID – RF200ContentContent
► Quick start intoautomation
► Engineering Software
► Energy Efficiency
2 x RF200 READER RF240R
1 x COMMUNICATION MODULE RF180C
1 x PROFINET/ETHERNET CONNECTING BLOCK
1 x POWER PLUG PRO 1 x PUSH PULL PLUG
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
2 x Terminal Cable5 x TRANSPONDER 5 x MOBILER 5 x SPACER 5 x TRANSPONDER► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
1 RFID S f d
MDS D400 ISO-CARD DATA STORAGE
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 96 Industry SectorOverview / List / Graphic / Cabinet
1x RFID- Software and documentation
SIMATIC RFID – RF300
1 RFID COMMUNICATION MODULE RF180C FOR PROFINET; 2 READERS CONNECTABLE 6GT2002-0JD00
1 RFID PROFINET-/ETHERNET- CONNECTING BLOCK 6GT2002-2JD00
2 RF300/600 CONN. CABLE PREASSEMBLED, LENGTH: 2 M 6GT2891-4FH20 ► Quick start intoautomation
► Engineering Software
► Energy Efficiency
1 RFID SYSTEMS SOFTWARE PACKAGE AND DOCUMENTATION ON CD 6GT2080-2AA20
1 RF300 READER RF340R (RF300+ISO15693) WITH RS422 AND INTEGRATED ANTENNA 6GT2801-2AB10
1 POWER PLUG PRO, 5-POLE PUSH PULL 6GK1907-0AB10-6AA0
1 RF300 READER RF310R (RF300+ISO15693) WITH RS422 AND INTEGRATED ANTENNA 6GT2801-1AB10PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
5 TRANSPONDER RF340T 8 KBYTE FRAM 6GT2800-4BB00
10 TRANSPONDER RF360T EPOXY-CARD, 8 KBYTE FRAM 6GT2800-4AC00
20 MOBY D / RF300 ISO MOBILE DATA MEMORY MDS D124 , 112 BYTE EEPROM 6GT2600-0AC10► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: None available
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 97 Industry Sector
Technical note: None available
Order number: 6GT2096-1AA00-0AA0
Overview / List / Graphic / Cabinet
SIMATIC RFID – RF300ContentContent
► Quick start intoautomation
► Engineering Software
► Energy Efficiency
SIMATIC RF180C
SIMATIC RF180C
1x PROFINET CommunicationModule RF180C with RJ45
1x Software and documentation
1x Power Supply Cable for RF180C
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Tank monitoring by RFID Nameplates, documentation of process data
Module RF180C with RJ45 Connector Terminal Block in IP67
2x Terminal Cable between Reader RF340R and Connect Module RF180C
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
1x SIMATIC RF340RReader 75x75x41
20x MDS D124Mobile data memory
10x SIMATIC RF360TTransponder
5x SIMATIC RF340TTransponder
1x SIMATIC RF310RReader 55x75x30
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 98 Industry Sector
Reader 75x75x41 Mobile data memory112 Byte EEPROM
Transponder 8kByte Memory
Transponder 8kByte Memory
Reader 55x75x30
Overview / List / Graphic / Cabinet
SIMATIC SIWAREX Weighing Systems
1 x SIWAREX FTA- Project engineering package FTA- Connecting cable (RS232C)- Documentation on CD ► Quick start into
automation
► Engineering Software
► Energy Efficiency
1 x SIWAREX U- Project engineering package U- Connecting cable (RS232C)- Documentation on CD
1 x Load cell series BB, nominal load 10kg1 x base plate with overload protection
SIWAREX U SIWAREX FTAWägezelle Baureihe BB
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
1 x base plate with overload protection1 x Elastomer bearing1 x License agreement
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: None
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: None available
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 99 Industry Sector
Technical note: None available
Order number: 7MH4901-0AA10
Overview / List / Graphic / Cabinet
Drive Technologies
• SINAMICS G120 Standard drive 400V with and without Filter
• Overview
• SINAMICS S120 Servo drive
• SIMOTION D410 add on for S120
230V 400V
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 100 Industry SectorOverview / List / Graphic / Cabinet
Training curriculums siemens.com/sce/modules
SINAMICS G120 standard drive 3 AC 400V-Network Overview
Recomendation
► Quick start into automation
► Engineering Software
► Energy Efficiency
G120-Trainer Package 3AC 400V – 0.55kW PROFINET
CIRCUIT-BREAKER
Recomendation
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automationSoftware in Package STARTER
PC-CONVERTER CONNECTION KIT
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
Power Module PM240 – 0.55kWwith /without EMV-Filter A
Asynchronous motori.e.. 1Le!rate output: 0,75kW, 4-Pole, rotational speed 1370 rpm
Control Unit PROFINET CU240E-2 PN-F with OPERATOR PANEL (IOP)
► Additional
► Drive Technologies
S7-300Controller
Power line
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 101 Industry Sector
Not part of the package
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SINAMICS G120 standard drive 3 AC 400V-Network
Alternativ: without Filter
Alterntiv: with Filter1 SINAMICS G120 POWER MODULE PM240-2 STANDARD WITH BUILT IN CL. A FILTER WITH BUILT IN
BRAKING CHOPPER 3AC380-480V 196 X 73 X 165 (HXWXD), FSA PROTECTION IP20 WITHOUT CONTROL UNIT AND PANEL APPROVED FOR FIRMWARE-VERSION V4.6
6SL3210-1PE12-3AL1TP 6SL3200-3AX00-0AL0
► Quick start into automation
► Engineering Software
► Energy Efficiency
1 SINAMICS G120 CONTROL UNIT CU240E-2 PN-F E-TYPE SAFETY INTEGRATED STO, SS1, SLS, PROFINET 6DI, 3DO, 2AI, 2AO, MAX 3F-DI PTC/KTY INTERFACE USB- AND SD/MMC-INTERFACE PROTECTION IP20 AMBIENT TEMP 0 TO +50 DEG C WITHOUT POWER MODULE
6SL3244-0BB13-1FA0
Alternativ: without Filter1 SINAMICS G120 POWER MODULE PM240-2 STANDARD WITHOUT FILTER WITH BUILT IN BRAKING
CHOPPER 3AC380-480V 196 X 73 X 165 (HXWXD), FSA PROTECTION IP20 WITHOUT CONTROL UNIT AND PANEL APPROVED FOR FIRMWARE-VERSION V4.6
6SL3210-1PE12-3UL1 TP SL3200-3AX00-0UL0
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
PROTECTION IP20 AMBIENT TEMP 0 TO +50 DEG C WITHOUT POWER MODULE1 SINAMICS G120 INTELLIGENT OPERATOR PANEL (IOP) 6SL3255-0AA00-4JA01 SINAMICS G120 SHIELD CONNECTION KIT 3 INCL. SCREENING PLATE AND FIXING ELEMENTS 6SL3264-1EA00-0HB01 SINAMICS G120 PC-INVERTER CONNECTION KIT-2 3M USB-CABLE FOR CONTROL UNITS CU230P-2,
CU240B-2, CU240E-2 + SINAMICS G120C6SL3255-0AA00-2CA0
SINAMICS MICROMASTER STARTER Download SINAMICS Startdrive Download► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: Consider subsequent slideCore product for vocational W ld C I d i l C l
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 102 Industry Sector
Technical note: Consider subsequent slide
Order number: 6SL3200-3AX00-0AL0 6SL3200-3AX00-0UL0
Overview / List / Graphic / Cabinet
World Cup Industrial ControlMore: www.siemens.com/worldskills
TIA Portal siemens.com/tia-portal/details
SINAMICS G120 standard drive 3 AC 400V-Networkoptional Hardware
Recomendation
SIMOTICS GP LOW-VOLTAGE MOTORLOW-VOLTAGE MOTOR, IEC SQUIRREL-CAGE,SELF-VENTIL.,IP55 TEMP. CL. 155(F) ACC.TO 130(B)ALUMINIUM HOUSING PREMIUM EFFICIENCY IE2, 2POLE * FS80M * 0,75KW (50HZ)3 AC 50HZ 230VD/400VY * 3 AC 60HZ 460VY IM B 3, MOTOR PROTECTIONWITH 1 PTC THERMISTORS FOR SHUTDOWN TERMINAL BOX AT TOP
1LE1003-0DA22-2AB4
Recomendation
► Quick start into automation
► Engineering Software
► Energy Efficiency
WITH 1 PTC THERMISTORS FOR SHUTDOWN TERMINAL BOX AT TOP
SINAMICS LINE REACTOR380-480V 3AC 47-63HZ I_LN = 4,0A STANDALONE
6SL3203-0CE13-2AA0
MEMORY CARD SINAMICS 3,3V FLASH, 4MBYTE 6ES7954-8LC01-0AA0
CIRCUIT BREAKER SZ S00 3RV2011 1EA10 PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
CIRCUIT-BREAKER SZ S00 3RV2011-1EA10CIRCUIT-BREAKER SZ S00, FOR MOTOR PROTECTION, CLASS 10, A-RELEASE 2.8...4A, N-RELEASE 52A, SCREW CONNECTION, STANDARD SW. CAPACITY
ETHERNET CABLE 6XV1870-3RH60SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2 PREASSEMBLED WITH 2 RJ45 CONNECTORS LENGTH 6 M
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 MTIA PORTAL
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 103 Industry Sector
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
SINAMICS G120 standard drive 3 AC 400V-Networkoptional Software
Recomendation
STARTER 6SL3072-0AA00-0AG0STARTER COMMISSIONING TOOL FOR SINAMICS AND MICROMASTER VERSION V4.3.3
STARTDRIVE 6SL3072-4AD02-1XG0 SOFTWARE ON DVD STARTDRIVE ENGINEERING AND COMMISSIONG TOOL FOR SINAMICS VERSION V13
Recomendation
► Quick start into automation
► Engineering Software
► Energy Efficiency
SOFTWARE ON DVD: STARTDRIVE ENGINEERING- AND COMMISSIONG TOOL FOR SINAMICS VERSION V13
SIZER 6SL3070-0AA00-0AG0SIZER FOR SIEMENS DRIVES DRIVE DESIGN TOOL
DRIVE ES BASIC V5.5 SP3 6SW1700-5JA00-5AA0PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
ENGINEERING-SW FOR DRIVES, 5-LANGUAGE CDWITH ELECTR. DOCUMENTATIONFOR STEP 7 V5.4 FLOATING LICENSE
DRIVE ES SIMATIC V5.5 6SW1700-5JC00-5AA0DRIVE ES SIMATIC V5.5 BLOCK LIBRARIES FOR SIMATIC S7
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
DRIVE ES SIMATIC V5.5 BLOCK LIBRARIES FOR SIMATIC S7FOR COMMUNICATION WITH DRIVES 5-LANGUAGE CD; WITH ELECTR.DOCUMENTATION
TIA PORTAL
SINAMICS MICROMASTER STARTER Download SINAMICS Startdrive Download
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 104 Industry Sector
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SINAMICS G120 – Information
Recommended catalog
SINAMICS G120: Siemens D31Asynchronous motors: Siemens D81.1 ► Quick start into
automation
► Engineering Software
► Energy Efficiency
Asynchronous motors: Siemens D81.1
Useful information for download
SINAMICS G120C (Catalogs and reference books ) PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
SINAMICS G120C (Catalogs and reference books…)www.siemens.com/sinamics-g120C
Energy conservation with SINAMICS G120 www.siemens.com/energysaving ► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
TIA PORTAL
SINAMICS MICROMASTER STARTER Download SINAMICS Startdrive Download
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 105 Industry SectorOverview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SINAMICS S120 servo drive 1 AC 230V-NetworkOverview
S120-Package 1AC 230V – 0,37kW PROFINET
CIRCUIT-BREAKER
Asynchronous motor Accessory 1
Overview
► Quick start into automation
► Engineering Software
► Energy Efficiency
Power Module
Network supply1 AC 230V 50Hz commutation choke
Software in Package DCC SINAMICSSIZERCAD CREATORStarter
S t
yi.e. LA7070-4 with rated output: 0,25 kW , 4-pole, rotational speed 1350 rpm 50Hz with/without speed actual value encoder with Sensor-Module SMC30
Accessory 1
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Control UnitPROFINETCU310 PNCompact Flash Card
Power Module PM340 - 0.37kWwith integrated filter
Basic Operator PanelS7-300 Power lineServo motor
Servo motor i.e. 1FK7022 with moment of a torque 0.85 NM, rotational speed 6000 rpm incremental encoder with DRIVE-CliQ
Accessory 2
Accessory 3
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
Basic Operator PanelController Sensor-Cable-Drive-CLIQ
Terminal Module TM31Add on Board for SINAMICS CONVERTORS with digital and analog Input and Outputs
External Power Supply24V-Power supply forCU310 andS120 Power module
Servo motor i.e. 1FK7022 with moment of a torque 0.85 NM, rotational speed 6000 rpm absolute encoder with DRIVE-CliQ
Accessory 3
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 106 Industry Sector
Not part of the package
Additional Safety Module TM 54 F4 failsafe digital outputs 10 failsafe digital inputs
Overview / List / Graphic / Cabinet
SINAMICS S120 servo drive 1 AC 230V-Network
Drive System1 CONTROL UNIT CU310-2 PN 6SL3040-1LA01-0AA01 COMPACTFLASH CARD WITH FIRMWARE OPTION PERFORMANCE EXTENSION, CURRENT SOFTWARE
VERSION V4.066SL3054-0EGD0-0AA0
► Quick start into automation
► Engineering Software
► Energy Efficiency
1 SINAMICS LICENSE SAFETY INTEGRATED 6SL3074-0AA10-0AA01 BASIC OPERATOR PANEL BOP20 6SL3055-0AA00-4BA01 SINAMICS S120 POWER MODULE PM340; INPUT: 1AC 200-240V, 50/60HZ, OUTPUT: 3AC 2,3A (0,37KW) 6SL3210-1SB12-3AA0
1 AC COMMUNICATION CHOKE 200V-240V 1AC 3,4A 6SE6400-3CC00-4AB31 SINAMICS SCREENING KIT FOR POWER MODULE FSA 6SL3262-1AA00-0BA0
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Software1 STARTER COMMISSIONING TOOL FOR SINAMICS 6SL3072-0AA00-0AG01 DCC SINAMICS 6AU1810-1HA22-1XA01 SIZER CONFIGURING TOOL DVD 6SL3070-0AA00-0AG0
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research institutions and non commercial training departments!
Technical note: Consider subsequent slide
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 107 Industry Sector
Technical note: Consider subsequent slide
Order number: 6SL3080-8AB00-0AA0
Overview / List / Graphic / Cabinet
SINAMICS S120 servo drive 1 AC 230V Network 1) Asynchrous motor with/without position value measuring
Recommended Motors
LOW-VOLTAGE SQUIRREL-CAGE MOTOR Type 1LA7Rated output: 0 25 kW rotational speed 1350 rpm 50Hz
1LA7070-4AB10-Z Z = A23 + H57
Position- or Moment control with relative distance measurement impulse generator at the Motor (with positioning at the reference point)
Recommended Motors
► Quick start into automation
► Engineering Software
► Energy Efficiency
Rated output: 0,25 kW , rotational speed 1350 rpm 50Hz Size 71M with foot-mounting B3 degree of protection IP55Add-on Z = A23 motor protection with KTY 84-130Add-on Z = H57 speed actual value encoder 1XP8001-1 HTL with 1024 pulses per rev
Z = A23 + H57
SIGNAL CABLE: Between Sensor-Module SMC30 and CU310PN, DRIVE-CLIQ cable IP20/IP20 length: 0,95 m
6SL3060-4AA10-0AA0
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Sensor Module SMC30:For incremental encoder: HTL, for other encoder
6SL3055-0AA00-5CA2
SIGNAL CABLE:Between Sensor-Module SMC30 and speed actual value encoder, Motion Connect 700, Signal A/B/R, length 2 m
6SX7002-0AN00-1AC0► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
Speed control - without actual speed encoder at the motor
LOW-VOLTAGE SQUIRREL-CAGE MOTOR Type 1LA9rated output: 0,25 kW , rotational speed 1350 rpm 50Hz, size 71M with foot-mounting B3 degree of protection IP55,Add-on Z = A23 motor protection with KTY 84-130
1LA9070-4AB10-Z Z = A23
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 108 Industry Sector
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
SINAMICS S120 servo drive 1 AC 230V Network 2a) Relative distance measurement with positioning at the reference point
Recommended Motors
SERVOMOTOR 1FK7022 0,85 Nm, 6000 RPMNATURAL COOLING, MODEL IM B5 INCREMENTAL ENCODER 2048 S/R, RESOLUTION 22 BIT WITH DRIVE-CLIQ INTERFACE, SMOOTH SHAFT, TOLERANCE N
1FK7022-5AK21-1DG0
POWER CABLE 6FX5002-5CG01-1AC0
Recommended Motors
► Quick start into automation
► Engineering Software
► Energy Efficiency
PREASSEMBLED 4X1.5 C, CONNECTOR SIZE 1 MOTION-CONNECT 500; length 2 m6FX5002 5CG01 1AC0
SIGNAL CABLEPREASSEMBLED; DRIVE CLIQ CONNECTOR IP20/IP67, MOTION-CONNECT 500; length 2 m
6FX5002-2DC10-1AC0
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
SERVOMOTOR 1FK7032 1,1 Nm, 3000 RPMNATURAL COOLING, MODEL IM B5 INCREMENTAL ENCODER 2048 S/R, RESOLUTION 22 BIT WITH DRIVE-CLIQ INTERFACE; SMOOTH SHAFT, TOLERANCE N
1FK7032-5AF21-1DG0
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
POWER CABLEPREASSEMBLED 4X1.5 C, CONNECTOR SIZE 1 MOTION-CONNECT 500; length 2 m
6FX5002-5CG01-1AC0
SIGNAL CABLEDRIVE CLIQ CONNECTOR IP20/IP67, MOTION-CONNECT 500; length 2 m
6FX5002-2DC10-1AC0► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 109 Industry Sector
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
SINAMICS S120 servo drive 1 AC 230V Network 2b) Relative distance measurement with positioning at the reference point
Recommended Motors
SYNCHRONOUS SERVOMOTOR, 1FK7011 V 0.18 NM, 6000 RPMNATURAL COOLING, IM B5 (IM V1, IM V3) POWER/SIGNAL CONNECTORS CONNECTOR CAN BE ROTATED BY 270 DEGR. DEGREE OF PROTECTION IP64; PAINT FINISH RAL7016
1FK7011-5AK21-1JG3
Recommended Motors
► Quick start into automation
► Engineering Software
► Energy Efficiency
POWER CABLEPREASSEMBLED 4X1,5+(2X1,5) C; CONNECTOR SIZE 0.5 (1FK7 AH20 TO POWER MODULES AND AC/AC DRIVES) UL/CSA DESINA, MOTION-CONNECT 500 DMAX=10,8 MM, LENGTH (M) =2
6FX5002-5DA30-1AC5
SINAMICS S120 SENSOR MODULE SMC20 6SL3055-0AA00-5BA2 PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
SINAMICS S120 SENSOR MODULE SMC20INCREMENTAL ENCODER: SIN/COS 1VPP ABSOLUTE ENCODER: ENDAT WITHOUT DRIVE-CLIQ CABLE 30 MM WIDTH
6SL3055 0AA00 5BA2
SIGNAL CABLE PREASSAMBLED (ABSOLUTE ENCODER IN THE MOTOR AH20) 3X2X0,14+4X0,14+2X0,5+4X0,22C WITH
6FX5002-2EQ20-1AC0 ► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
( ) , , , ,M17 CONNECTOR UL/CSA DESINA MOTION CONNECT 500 DMAX = 9,9MM LENGTH (M)=2
SINAMICS DRIVE-CLIQ CABLE IP20 LENGTH (M)= 0,95 6SL3060-4AA10-0AA0► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 110 Industry Sector
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
SINAMICS S120 servo drive 1 AC 230V Network 3a) Absolute distance measurement with singular initial positioning
at the reference pointRecommended Motors
SYNCHRONOUS SERVOMOTOR, 1FK7022, 0.85 NM, 6000 RPM,NATURAL COOLING, IM B5 (IM V1, IM V3) POWER/SIGNAL CONNECTORS CONNECTOR CAN BE ROTATED BY 270 DEGR.
1FK7022-5AK21-1DG0
POWER CABLE 6FX5002-5CG01-1AC0
Recommended Motors
► Quick start into automation
► Engineering Software
► Energy Efficiency
PREASSEMBLED 4X1.5 C, CONNECTOR SIZE 1 (SINAMICS AC DRIVE) UL/CSA, DESINA, MOTION CONNECT 500, DMAX = 8.4 MM, LENGTH (M) = 2
6FX5002 5CG01 1AC0
SIGNAL CABLE PREASSEMBLED (SINAMICS DRIVE CLIQ) CONNECTOR IP20/IP67, WITH 24 V MOTION-CONNECT 500 LENGTH (M) = 2
6FX5002-2DC10-1AC0
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
SYNCHRONOUS SERVOMOTOR, 1FK7022, 1.1 NM, 3000 RPM,NATURAL COOLING, IM B5 (IM V1, IM V3) POWER/SIGNAL CONNECTORS CONNECTOR CAN BE ROTATED BY 270 DEGR
1FK7032-5AF21-1DG0
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
POWER CABLEPREASSEMBLED 4X1.5 C, CONNECTOR SIZE 1 (SINAMICS AC DRIVE) UL/CSA, DESINA, MOTION CONNECT 500, DMAX = 8.4 MM, LENGTH (M) = 2
6FX5002-5CG01-1AC0
SIGNAL CABLEPREASSEMBLED (SINAMICS DRIVE CLIQ) CONNECTOR IP20/IP67, WITH 24 V MOTION-CONNECT 500 LENGTH (M) = 2
6FX5002-2DC10-1AC0
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 111 Industry Sector
LENGTH (M) = 2
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
SINAMICS S120 servo drive 1 AC 230V Network 3b) With absolute distance measurement with singular initial positioning
at the reference pointRecommended Motors
SYNCHRONOUS SERVOMOTOR, 1FK7011 V 0.18 NM, 6000 RPMNatural cooling, model IM B5 absolute value transmitter EnDat 16 S/Rvia Sensor module SMC20; smooth shaft, Tolerance N
1FK7011-5AK21-1JG3
Recommended Motors
► Quick start into automation
► Engineering Software
► Energy Efficiency
POWER CABLECustomized 4X1.5+ C, size connector 0.5 MOTION-CONNECT 500; length 2 m
6FX5002-5DA30-1AC0
SENSOR MODULEC SMC20 6SL3055-0AA00-5BA2PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
For absolute value transmitter EnDat 16 S/R
SIGNAL CABLE 1Between Sensor-Module SMC20 and absolute value transmitter EnDat 16 S/RMOTION CONNECT 500 with length 2 m
6FX5002-2EQ20-1AC0
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
SIGNAL CABLE 2Between Sensor-Module SMC20 and CU310PNSINAMICS DRIVE-CLIQ CABLE IP20/IP20 LENGTH: 0.95 M
6SL3060-4AA10-0AA0► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 112 Industry Sector
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
SINAMICS S120 servo drive 1 AC 230V Network optional Hardware
Recomendation
CIRCUIT-BREAKER: 230/400V 6KA, 1POLE, C, 10A, T=70mm
5SY6110-7
POWER SUPPLY:SITOP MODULAR SV INPUT: AC 120/230 - 500V, OUTPUT: DC 24V / 5A
6EP1333-3BA00
Recomendation
► Quick start into automation
► Engineering Software
► Energy Efficiency
POWER SUPPLY: LOGO!-POWER 24V ; INPUT : AC 100-240 V, OUTPUT: DC 24V / 4 A
6EP1332-1SH52
CABLE:SIMATIC NET, INDUSTRIAL ETHERNET, TP XP CORD RJ45/RJ45, CAT 6, CROSSED ; length = 6m
6XV1870-3RH60
DOCUMENTATION: SINAMICS S120 on CD ROM 6SL3097 2CA00 0YG5 PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
DOCUMENTATION: SINAMICS S120 on CD-ROM 6SL3097-2CA00-0YG5TERMINAL MODULE TM31 EXTENSION:FOR SINAMICS CONVERTORS S120 12 DI, 2 DA, 2 AE, 2 AA
6SL3055-0AA00-3AA1
TERMINAL MODULE TM54F SAFETY I/O EXTENSION :FOR SINAMICS CONVERTORS WITH FAIL-SAFE IN- AND OUTPUTS
6SL3055-0AA00-3BA0► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
SIGNAL CABLE: SINAMICS DRIVE-CLIQ CABLE IP20/IP20 LENGTH: 0.95 M
6SL3060-4AA10-0AA0
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 113 Industry Sector
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
SINAMICS S120 servo drive 1 AC 230V Network Software optional
Recomendation
STARTER 6SL3072-0AA00-0AG0STARTER COMMISSIONING TOOL FOR SINAMICS AND MICROMASTER VERSION V4.3.2
SIZER 6SL3070-0AA00-0AG0SIZER FOR SIEMENS DRIVES DRIVE DESIGN TOOL
Recomendation
► Quick start into automation
► Engineering Software
► Energy Efficiency
SIZER FOR SIEMENS DRIVES DRIVE DESIGN TOOL
DRIVE ES BASIC V5.5 SP3 6SW1700-5JA00-5AA0ENGINEERING-SW FOR DRIVES, 5-LANGUAGE CDWITH ELECTR. DOCUMENTATIONFOR STEP 7 V5.4 FLOATING LICENSE
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
DRIVE ES SIMATIC V5.5 6SW1700-5JC00-5AA0DRIVE ES SIMATIC V5.5 BLOCK LIBRARIES FOR SIMATIC S7FOR COMMUNICATION WITH DRIVES 5-LANGUAGE CD; WITH ELECTR.DOCUMENTATION ► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 114 Industry SectorOverview / List / Graphic / Cabinet
When selecting please ask the local Siemens technical sales department
SINAMICS S120 servo drive 3 AC 400V Network Overview
S120-package 3AC 400V – 1.5kW PROFINET
CIRCUIT-BREAKER SIZE
Asynchronous motor Accessory A
Overview
► Quick start into automation
► Engineering Software
► Energy Efficiency
Network supply3 AC 400V 50Hz with power switch, EMV-Filter, commutation choke
Software in Package DCC SINAMICSSIZERCAD CREATOR Starter
S t
yi.e. 1LA7096-4power 1,5 kW, 4-pole, 1420 rpm, with / without speed actual value encoder via Sensor-Module SMC30
Accessory A
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Control UnitPROFINETCU310 PNCompact Flash Card
Power Module PM340 – 1,5 kW
Basic Operator PanelS7-300 Power line
Servo motor
Servo motor i.e. 1FK7042with torque 3,0 Nm3000 U/minincremental encoder with DRIVE-CliQ,
Accessory B
Accessory C
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
PanelController Sensor-Cable-Drive-CLIQ
Terminal Module TM31ADD ON BOARD FOR SINAMICS CONVERTORS WITH DIGITAL AND ANALOG IN- AND OUTPUTS
External Power Supply24V-Power supply forCU310 andS120 Power module
Servo motor i.e. 1FK7042with torque 3,0 Nm3000 U/minabsolute encoderwith DRIVE-CliQ,
Accessory C
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 115 Industry Sector
Not part of the package
Additional Safety Module TM 54 F4 failsafe digital outputs 10 failsafe digital inputs
Overview / List / Graphic / Cabinet
SINAMICS S120 servo drive 3 AC 400V-Network
Drive system1 CONTROL UNIT CU310 PN 6SL3040-1LA01-0AA01 COMPACTFLASH CARD WITH FIRMWARE OPTION PERFORMANCE EXTENSION,
ACTUAL FIRMWARE RELEASE V4.066SL3054-0EG00-1BA0
1 SINAMICS LICENSE SAFETY INTEGRATED 6SL3074-0AA10-0AA0► Quick start into
automation
► Engineering Software
► Energy Efficiency
1 SINAMICS LICENSE SAFETY INTEGRATED 6SL3074-0AA10-0AA01 BASIC OPERATOR PANEL (BOP20) 6SL3055-0AA00-4BA01 CONVERTER POWER MODULE PM340 WITHOUT NETFILTER 1,5 kW; 4,1A 6SL3210-1SE14-1UA01 EMC FILTER 380V-480V 3AC 6A FOOTPRINT FSA - CLASS A 6SE6400-2FA00-6AD01 AC COMMUNICATION CHOKE 200V-480V 3AC 4,8A BASE LAYER FASA -3,2 MH 6SE6400-3CC00-6AD31 SCREENING KIT FOR POWER MODULE FSA 6SL3262-1AA00-0BA0S ft PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Software1 STARTER COMMISSIONING TOOL 6SL3072-0AA00-0AG01 DCC SINAMICS 6AU1810-1HA22-1XA01 SIZER CONFIGURING TOOL DVD 6SL3070-0AA00-0AG0
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
Systemvoraussetzung: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP132 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational schools, colleges and universities, in-house vocational training departments, non-commercial research institutions and non-commercial training departments!
Technical note: Consider subsequent slide
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 116 Industry Sector
Technical note: Consider subsequent slide
Order number: 6SL3080-8AE00-0AA0
Overview / List / Graphic / Cabinet
SINAMICS S120 Servo drive 3 AC 400V Network A) Asynchronous-Motor with/without position measuring of actual position
Recomendation
Standard low voltage induction motor Type 1LA7Rated output: 1,5 kW, rotational speed 1420 rpm 50Hz
1LA7096-4AA60-Z Z = A23+H75
Position- or Moment control with relative distance measurement impulse generator at the Motor (with positioning at the reference point)
Recomendation
► Quick start into automation
► Engineering Software
► Energy Efficiency
p p pSize: 90L with foot-mounting B3 degree of protection IP55Add-on Z = A23 motor protection with KTY 84-130Add-on Z = H57 speed actual value encoder 1XP8001-1 HTL with 1024 pulses per reverse
SIGNAL CABLE :Between Sensor-Module SMC30 and CU310PN, SINAMICS DRIVE-CLIQ CABLE IP20/IP20 LENGTH: 0.95 M
6SL3060-4AA10-0AA0
Sensor Module SMC30: 6SL3055 0AA00 5CA2 PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Sensor Module SMC30:For incremental encoder: HTL, for other encoder
6SL3055-0AA00-5CA2
SIGNAL CABLE :Between Sensor-Module SMC30 and rotation speed encoder, Motion Connect 700, Signal A/B/R with length 2 m
6SX7002-0AN00-1AC0
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
Standard low voltage induction motor Type 1LA9Rated output: 1,5 kW , rotational speed 1420 rpm 50Hz Size: 71M with foot-mounting B3 degree of protection IP55Add-on Z = A23 motor protection with KTY 84-130
1LA9096-4AA60-ZZ = A23
Speed control – without actual speed encoder at the motor
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 117 Industry Sector
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
SINAMICS S120 Servo drive 3 AC 400V Network B) With relative distance measurement (positioning at the reference point)
Recomendation
SIMOTICS S-1FK7
SYNCHRONOUS MOTOR 1FK7-CT PN=0,82 KW; UZK=600V
M0=3NM (100K); NN=3000RPM; NATURAL AIR COOLING,
1FK7042-2AF71-1QG0
Recomendation
► Quick start into automation
► Engineering Software
► Energy Efficiency
FRAME SIZE IMB 5 (IM V1, IM V3) FLANGE 1 POWER CONNECTOR ROTATABLE
ABSOLUTE ENCODER SINGLETURN 20 BIT WITH DRIVE-CLIQ
INTERFACE (ENCODER AS20DQI) PLAIN SHAFT, TOLERANCE N;
W/O HOLDING BRAKE PROTECTION CLASS IP64;;
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
POWER CABLE
CUSTOMIZED 4X1.5 C, SIZE CONNECTOR 1, MOTION-CONNECT 500; LENGTH 2 M
6FX5002-5CG01-1AC0► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
SIGNAL CABLE
CUSTOMIZED; DRIVE CLIQ CONNECTOR, IP20/IP67, MOTION-CONNECT 500; LENGTH 2 M6FX5002-2DC10-1AC0
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 118 Industry Sector
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
SINAMICS S120 Servo drive 3 AC 400V Network C) With absolute distance measurement (without positioning at the reference point)
Recomendation
SIMOTICS S-1FK7
SYNCHRONOUS MOTOR 1FK7-CT
PN=0,82 KW; UZK=600V M0=3NM (100K); NN=3000RPM;
1FK7042-2AF71-1FG0
Recomendation
► Quick start into automation
► Engineering Software
► Energy Efficiency
NATURAL AIR COOLING, FRAME SIZE IMB 5 (IM V1, IM V3);
FLANGE; 1 POWER CONNECTOR ROTATABLE;
ABSOLUTE ENCODER 22 BIT + 12 BIT MULTITURN, WITH
DRIVE-CLIQ INTERFACE (ENCODER AM22DQ)
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
PLAIN SHAFT, TOLERANCE N; W/O HOLDING BRAKE
PROTECTION CLASS IP64
POWER CABLE
CUSTOMIZED 4X1 5 C SIZE CONNECTOR 1 MOTION CONNECT 500; LENGTH 2 M
6FX5002-5CG01-1AC0 ► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
CUSTOMIZED 4X1.5 C, SIZE CONNECTOR 1, MOTION-CONNECT 500; LENGTH 2 M
SIGNAL CABLE
CUSTOMIZED; DRIVE CLIQ CONNECTOR, IP20/IP67, MOTION-CONNECT 500; LENGTH 2 M6FX5002-2DC10-1AC0 ► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 119 Industry Sector
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
SINAMICS S120 Servo drive 3 AC 400V Network Hardware optional
Recomendation
CIRCUIT-BREAKER S00CIRCUIT-BREAKER SZ S00, FOR MOTOR PROTECTION, CLASS 10, A-RELEASE 5.5...8A
3RV2011-1HA10
POWER SUPPLY SITOP MODULAR SV INPUT: AC 120/230 - 500V, OUTPUT : DC 24V / 5A
6EP1333-3BA00
Recomendation
► Quick start into automation
► Engineering Software
► Energy Efficiency
POWER SUPPLY LOGO!-POWER 24V; INPUT : AC 100-240 V, OUTPUT: DC 24V / 4 A
6EP1332-1SH52
CABLESIMATIC NET, INDUSTRIAL ETHERNET, TP XP CORD RJ45/RJ45, CAT 6, CROSSED ; LENGTH = 6m
6XV1870-3RH60
DOCUMENTATION 6SL3097 2CA00 0YG5 PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
DOCUMENTATION SINAMICS S120 ON CD
6SL3097-2CA00-0YG5
TERMINAL MODULE TM31 I/O-EXTENSIONFOR SINAMICS CONVERTORS WITH DIGITAL AND ANALOG IN- AND OUTPUTS; 12 DI, 2 DA, 2 AE, 2 AA
6SL3055-0AA00-3AA1
TERMINAL MODULE TM54F Safety I/O-EXTENSION : FOR SINAMICS CONVERTORS WITH FAIL SAFE IN AND OUTPUTS
6SL3055-0AA00-3BA0► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
FOR SINAMICS CONVERTORS WITH FAIL-SAFE IN- AND OUTPUTS
SIGNAL CABLESINAMICS DRIVE-CLIQ CABLE IP20/IP20 LENGTH: 0.95 M
6SL3060-4AA10-0AA0► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 120 Industry Sector
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
SINAMICS S120 Servo drive 3 AC 400V Network Software optional
Recomendation
STARTER 6SL3072-0AA00-0AG0STARTER COMMISSIONING TOOL FOR SINAMICS AND MICROMASTER VERSION V4.3.2
SIZER 6SL3070-0AA00-0AG0SIZER FOR SIEMENS DRIVES DRIVE DESIGN TOOL
Recomendation
► Quick start into automation
► Engineering Software
► Energy Efficiency
SIZER FOR SIEMENS DRIVES DRIVE DESIGN TOOL
DRIVE ES BASIC V5.5 SP3 6SW1700-5JA00-5AA0ENGINEERING-SW FOR DRIVES, 5-LANGUAGE CD WITH ELECTR. DOCUMENTATIONFOR STEP 7 V5.4 FLOATING LICENSE
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
DRIVE ES SIMATIC V5.5 6SW1700-5JC00-5AA0DRIVE ES SIMATIC V5.5 BLOCK LIBRARIES FOR SIMATIC S7FOR COMMUNICATION WITH DRIVES 5-LANGUAGE CD; WITH ELECTR. DOCUMENTATION
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 121 Industry Sector
When selecting please ask the local Siemens technical sales department
SIMOTION D410-2 add on for SINAMICS S120 1- and 3- phase
SIMOTION D410-2 is a single-axis system, which can be used in combination with SINAMICS S120 AC/AC Power Module.
SIMOTION D410-2 is the entry level controller in the SIMOTION D family. ► Quick start into automation
► Engineering Software
► Energy Efficiency
SIMOTION D410 is the ideal controller, if Motion Control for a single-axis and PLC functionality is demanded in a small form factor.
PROFINET IO with IRT (with D410-2 PN/DP) enables various connectivity with HMI and distributed I/Os.
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 122 Industry SectorOverview / List / Graphic / Cabinet
SIMOTION D410 add on for SINAMICS S120
1 SIMOTION DRIVE BASED CONTROL UNIT D410-2 DP/PN SINGLE-AXIS CONTROLLER WITH PROFINET VARIANT
6AU1410-2AD00-0AA0
1 SIMOTION DRIVE-BASED 1 GB COMPACT FLASH CARD D410-2; SINAMICS DRIVE SOFTWARE V4.X AND SIMOTION KERNEL FOR SIMOTION D410-2
6AU1400-1PA22-0AA0► Quick start into
automation
► Engineering Software
► Energy Efficiency
1 SIMOTION ENGINEERING SYSTEM SCOUT STANDALONE V4.3 FULL LICENSE DVD INCL. STARTER, RUNTIME, TECHN., DRIVES BASIC, DOCUMENTATION FREE OF CHARGE UTILITIES
6AU1810-1CA43-1XA0
1 SIMOTION ENGINEERING SYSTEM DCC SIMOTION V2.2 SP1 FULL LICENSE DCC FOR SIMOTION V4.1 SP1 AND FOR SINAMICS V2.5 OPTION FOR SCOUT V4.3 AND FOR STARTER V4.1 DELIVERY ON DATA CARRIER DVD INCL. FLOATING LICENSE
6AU1810-1JA22-1XA0
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
1 SIMOTION IT COMPREHENSIVE IT FUNCTIONS WITH JAVA VIRTUAL MACHINE: RUNTIME ENVIRONMENT FOR JAVA APPLICATIONS ON SIMOTION LICENSE (COL) INCLUDES FOLLOWING LICENCES:
SIMOTION IT DIAG: 6AU1820-8BA20-0AB0 SIMOTION IT OPC XML-DA: 6AU1820-8BB20-0AB0
6AU1820-8BD20-0AB0
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
System requirements: 64 BIT: Windows 7 Professional, Ultimate SP132 BIT: Windows 7 Professional, Ultimate SP1, Windows XP Professional SP3
Sales note:
Technical note:
For vocational schools, colleges and universities, in-house vocational training departments, non-commercial research institutions and non-commercial training departments!
Consider subsequent slide
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 123 Industry Sector
q
Order number: 6SL3080-8LA00-0AA0
Overview / List / Graphic / Cabinet
SIMOTION D410 add on for SINAMICS S120optional Software and Hardware
Recomendation
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M 6XV1870-3RH60SIMOTION ENGINEERING SYSTEM SCOUT STAND ALONE SOFTWARE CARE SERVICE 6AU1810-0CA00-0XL0SINAMICS TERMINAL MODULE CABINET TM31 WITHOUT DRIVE CLIQ CABLE ADD ON BOARD
Recomendation
► Quick start into automation
► Engineering Software
► Energy Efficiency
SINAMICS TERMINAL MODULE CABINET TM31 WITHOUT DRIVE-CLIQ CABLE ADD ON BOARD FOR SINAMICS CONVERTORS WITH DIGITAL AND ANALOG IN- AND OUTPUTS 6SL3055-0AA00-3AA1
SINAMICS DRIVE-CLIQ CABLE IP20/IP20 LENGTH: 0.95 M 6SL3060-4AA10-0AA0
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 124 Industry Sector
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
Additional
• Overview• Industrial Controls
T i P k P h i R k• Trainer Packages Purchasing Remarks • Trainer Packages General Regulations
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 125 Industry SectorOverview / List / Graphic / Cabinet
Training curriculums siemens.com/sce/modules
AdditionalAbstract of the comprehensive accessories Industrial Controls
► Quick start into automation
► Engineering Software
► Energy EfficiencyContactors and Contactor Assemblieshttps://eb.automation.siemens.com/mall/en/WW/Catalog/Products/8210239?tree=catalogtree
PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automationCommanding and Signaling Deviceshttps://eb.automation.siemens.com/mall/en/WW/Catalog/Products/8229999?tree=catalogtree
Terminal Blockshttp://w3.siemens.com/powerdistribution/global/EN/lv/product-portfolio/alpha/terminal-blocks/Pages/terminal-blocks.aspx
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
https://eb.automation.siemens.com/mall/en/de/Catalog/Products/10046635?tree=CatalogTree
Protection Equipmenthttps://eb.automation.siemens.com/mall/en/WW/Catalog/Products/10007268?tree=catalogtree
► Additional
► Drive Technologies
Safety Systemshttps://eb.automation.siemens.com/mall/en/WW/Catalog/Products/10121593?tree=catalogtree
SENTRON P t ti S it hi M i d M it i D i
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 126 Industry SectorOverview / List / Graphic / Cabinet
SENTRON Protection, Switching, Measuring and Monitoring Deviceshttps://eb.automation.siemens.com/mall/en/de/Catalog/Products/10005570?tree=CatalogTree
AdditionalPurchasing Remarks of SCE Trainer Packages
For the purchasing of SCE Trainer Packages, a special supplementary license agreement is required.The General License Conditions for Software Products for Industry Automation and Drive Technologies apply for software products. For trainer packages, the “Supplementary License Agreement for SIMATIC Software for Class-Room use at research-, development- and education institutions„ has to be signed and send for release of the delivery to ► Quick start into
automation
► Engineering Software
► Energy Efficiency
use at research , development and education institutions„ has to be signed and send for release of the delivery to I IA AS S EUR&AFR SCE. You will find these at: http://intranet.siemens.com/sce
Release for deliveryTrainer packages are released trough Siemens AG department I IA AS S EUR&AFR SCEContact Partner: Christian Callegari Fax: +49 (0)911-895-133992 und christian callegari@siemens com PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
Contact Partner: Christian Callegari Fax: +49 (0)911-895-133992 und [email protected]
ExceptionThe following Trainer packages are not intended for vocational in-house training Departments.SIMATIC S7-1516 PN/DP 6ES7516-3AN00-4AB3 SIMATIC STEP 7 Trainer Package V12 SP1 (12 * Package) 6ES7822 1BA03 4YA5
► Sensor Technologies
► Industrial Communication
► PLCs and Peripheries
SIMATIC STEP 7 Trainer Package V12 SP1 (12 Package) 6ES7822-1BA03-4YA5Upgrade SIMATIC STEP 7 Trainer Package V12 SP1 (12 * Upgrade Package) 6ES7822-1AA03-4YE5SIMATIC S7 Software for students 6ES7822-1AC03-4YA5Student License ► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 127 Industry SectorOverview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
AdditionalGeneral Regulations for SCE Trainer Packages
General Regulations• Prices, if listed, valid as of release 05/2014. The prices are in Euros ex works excluding packaging.• The sales tax (VAT) is not included in the prices. This is calculated separately according to the legal regulations
for each valid set► Quick start into
automation
► Engineering Software
► Energy Efficiency
for each valid set.• We reserve the right to change the price and will charge the price valid at shipping.• You will always find current prices upon request from your Siemens point of contact.• The listed products could be subject to European/German and/or US-Export regulations.• The General License Conditions for Software Products for Industry Automation and Drive Technologies apply for PLC d
► Process Automation
► Operator control & monitoring
► Micro Automation
automation
The General License Conditions for Software Products for Industry Automation and Drive Technologies apply for software products.
• The information provided in this SCE Guide Trainer Packages only contains general descriptions which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. ► Sensor
Technologies
► Industrial Communication
► PLCs and Peripheries
Additional Information• Benefits of SCE www.siemens.com/sce• More Information about the Trainer Packages www.siemens.com/sce/tp• Training curriculums: www.siemens.com/sce/modules
► Additional
► Drive Technologies
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 128 Industry Sector
• Complete didactic solutions from Partners: www.siemens.com/sce/partner
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Thank you for your attention!
Roberto Guidi
Industry Sector IA AS SCE
E-Mail: [email protected]
Restricted / © Siemens AG 2014. All Rights Reserved.
Version 05/2014Page 129 Industry Sector
siemens.it/sce