Scanner - How To Install Konica Minolta Bizhub 363

Fitms. Duktek TIP | 1

How To Install Konica Minolta Bizhub 363 Scanner?

I. FIRST STEP #1

1. Open Run and type: \\10.100.159.159

2. Click Driver


3. Enter Username & Password

Username : tip

Password : tip


4. Choose Driver Scanner

5. Choose Konica Minolta Bizhub 363


6. Choose FTPUtility_Bizhub363 and Copy into Your Computer Local Disk

7. Click Setup


8. Run The Program

9. Click OK

10. Click Next


11. Choose I Accept The Terms In The License Agreement and Click Next

12. Click Next


13. Choose Complete and Click Next

14. Click Install


Setup Is Running

15. Click Finish


II. SECOND STEP #2

1. Create A Folder SCAN in Your Drive (D:)


2. Right Click Your Mouse > Open Properties

3. Share Your Folder SCAN and Click OK


4. Click Start > KONICA MINOLTA > FTP Utility > Click FTP Utility > Keep Unblock From Firewall

5. Click Start > KONICA MINOLTA > FTP Utility > FTP Utility Setting


6. Click Browse

7. Choose Drive (D:) or The Root Folder Where You Place Your Folder SCAN That You Have Made

Then Click OK


8. Click OK


III. THIRD STEP #3

1. Open Your Browser (Mozilla Firefox)

Browse Your Printer IP Address, For Example: 10.100.157.250

Then This Page Will Appear in Your Browser


2. Choose The Orange Color Tab then Click New Registration

3. Choose FTP and Click OK


4. Please Enter The Column Bellow (notice the example) :

Name : Fitms

Host Address : 10.100.157.100 (enter your own computer IP)

File Path :/SCAN (according to folder SCAN name you made)

Anonymous : ON

Click OK


5. Address Book Registration Complete

Note: Registration cannot work if Scanner is using (busy)

6. Restart Your Computer.

Scanner Will Not Work Until The Computer is Restarted

Scanner - How To Install Konica Minolta Bizhub 363

Documents

Transcript of Scanner - How To Install Konica Minolta Bizhub 363