SCANLAN VATS / MIS · 2019. 3. 20. · Cat. No. Description Shaft Working Length Total Length...

SCANLAN® VATS / MIS Thoracoscopic / Minimally Invasive Instruments

SCANLAN INTERNATIONAL, Inc. • One Scanlan Plaza • Saint Paul, Minnesota 55107 • U.S.A. • 800-328-9458 • 651-298-0997 • FAX 651-298-0018©2015 Scanlan International, Inc.

– 3 –

Dear Customer,

Since 1921, Scanlan International has been dedicated to working closely with surgeons to provide the highest quality, innovative surgical instruments.

The specialties of thoracic and cardiac surgery are continuing to evolve from a conventional open approach to a thoracoscopic / minimally invasive approach. This evolution to video-assisted thoracic surgery (VATS) and minimally invasive cardiac (MIS) surgery have been the catalyst for a new generation of specialty surgical instrumentation.

Scanlan pioneered and continues to be the leader with innovative VATS and MIS specialty instrumentation. Scanlan® minimally invasive instruments offer a unique dual pivot point design that enables the instrument to be fully functional when placed through a port or very small thoracic incision while still providing the familiarity of traditional style handles for a comfortable feel and superior tactile response.

If I can ever be of assistance to you, please contact me toll-free within the United States and Canada or collect from anywhere in the world. Thank you for your continued support and demand for the finest surgical instrumentation.

Sincerely,

Timothy M. ScanlanPresident and Chief Executive Officer

Tim Scanlan

Brigid Scanlan Eiynck

Adam Scanlan

Joseph Scanlan

Ron Peick

RussellScanlan

Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Dual Pivot Point Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

D'Amico Biopsy Forceps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Clamps / Graspers / Dissectors Gonzalez-Rivas Lung Grasping Clamp . . . . . . . . . . . . . . . . . . . . . .10 Foerster Lung Grasping Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Duval Lung Grasping Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Node Grasping Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Khan Decortication Grasper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Allis Forceps (Clamp) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 D’Amico DeBakey Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Dennis Dissector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Chitwood DeBakey Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Gonzalez-Rivas Dissector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 DeBakey Cooley Forceps (Clamp) . . . . . . . . . . . . . . . . . . . . . . . . .30 Harken Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Scissors Super Cut™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Forceps Axial Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Spring Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Needle Holders Spring Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Ring Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 Axial Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Knot Pushers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Suture Cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Suctions Wolf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 Dennis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 D'Amico . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Sterns Chest Tube Passers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Suture Pullers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Instrument Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Instrument Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

VATS MISSCANLAN®

VATS / MIS Thoracoscopic / Minimally Invasive Instruments

Table of Contents


– 4 –


– 5 –

Key Features of SCANLAN® VATS / MIS Instrumentsn Unique dual pivot point, sliding-shaft design enables the instrument to be

fully functional when placed through a port or very small incision.

SCANLAN® Unique Dual Pivot Point, Sliding-shaft Design

Single Pivot PointConventional surgical instruments have a single pivot point (as indicated for the 7007-242SC scissors below). When inserted through a port or very small thoracic incision, the function of a single pivot point instrument significantly reduces the opening of the shanks, which affects the distance the blades / jaws can be opened.

Conventional Ring Style Handles

n Provides a familiar, comfortable feel in the surgeon’s hand.

n Allows the surgeon to focus on the surgical technique rather than on how to use the instrument.

Axial Handles

n Innovative handle design that provides superior balance and feel.

n Perfect for surgeons who prefer thoracoscopic instruments that allow them to “roll the handles between their fingertips.”

n The ergonomic handle design provides a secure grasp that is comfortable and familiar.

n Individually hand crafted – Scanlan’s skilled artisans create one unique instrument at a time… to ensure tactile feel, balance and performance.

n Durability – Scanlan uses only the highest quality stainless steel to produce long-lasting, corrosion resistant surgical instrumentation.

n Guarantee – Ten full years against manufacturing and material defects.

Conventional Scissors 7007-242SC

Dual Pivot PointScanlan VATS / MIS instruments have 2 pivot points (port compatible) with a sliding shaft between them as indicated for the 9909-910SC scissors below. The advantage of this design is that when the instrument is inserted through a port or very small thoracic incision, the instrument is fully functional. The length of the instrument from the blade / jaw tips to slightly before pivot point 2 is the working length which can be inserted through a port or very small incision without affecting functionality.

Pivot Point 1

Pivot Point 1

Working Length

Total Length

Sliding Shaft

Shaft

Pivot Point 2

VATS / MIS Scissors 9909-910SCVATS

VATS VATS

MIS

MIS MISSCANLAN®

VATS / MIS Thoracoscopic / Minimally Invasive InstrumentsSCANLAN®



– 6 –


– 7 –

SCANLAN®

D’Amico Biopsy ForcepsDeveloped in cooperation with Thomas A. D’Amico, MD

SCANLAN®


SCANLAN®


VATS

VATS Procedures

n This versatile instrument can be used as both a dissector and as a biopsy forceps.

n Dissector - the opening and curve of the oval ring jaws provide visualization of the target tissue making this a very useful instrument for dissection.

n Biopsy - The 6 mm width serrated oval jaws provide a secure grasp of the node tissue for ample tissue yield with each bite.

n Unique 5 mm to 7 mm tapered shaft design. The finer 5 mm shaft is optimized for improved visibility and ergonomics. The 7 mm pivot points provide strength and durability.

n Conventional style handles provide a familiar, comfortable feel.

n Available with or without ratchets.

VATS Procedures

n The 7 mm width oval cupped jaws provide a secure grasp of the node tissue for maximum tissue yield with each bite.

n The curved jaws improve visualization of the biopsy site.

n Unique 5 mm to 7 mm tapered shaft design. The finer 5 mm shaft is optimized for improved visibility and ergonomics. The 7 mm pivot points provide strength and durability.



Cat. No. Description Shaft

Working Length

Total Length

9009-3026 mm width oval ring jaws Curved With ratchet 5 mm

Tapered to 7 mm

9”(23 cm)

13”(33 cm)

9009-3036 mm width oval ring jaws Curved Without ratchet


Working Length

Total Length

9009-3127 mm width oval cupped jaws Curved With ratchet 5 mm

Tapered to 7 mm

9”(23 cm)

13”(33 cm)

9009-3137 mm width oval cupped jaws Curved Without ratchet

9009-3029009-303

9009-3129009-313

Use your Smart Phone and QR Reader software to photograph

the code below to view a Video Demonstration of the D'Amico Mediastinoscopy

Biopsy Forceps

9009-3009009-301

9009-3109009-311


– 8 –


– 9 –

VATS

VATS Procedures

n This versatile instrument can be used as both a dissector and as a biopsy forceps.

n Dissector - the opening and curve of the oval ring jaws provide visualization of the target tissue making this a very useful instrument for dissection.

n Biopsy - The 6 mm width serrated oval jaws provide a secure grasp of the node tissue for ample tissue yield with each bite.

n Durable, robust design.



VATS Procedures

n The 7 mm width oval cupped jaws provide a secure grasp of the node tissue for maximum tissue yield with each bite.

n The curved jaws improve visualization of the biopsy site.

n Durable, robust design.




Working Length

Total Length

9009-3006 mm width oval ring jaws Curved With ratchet

7 mm 11”(28 cm)15”

(38 cm)9009-301

6 mm width oval ring jaws Curved Without ratchet


Working Length

Total Length

9009-3107 mm width oval cupped jaws Curved With ratchet

7 mm 11”(28 cm)15”

(38 cm)9009-311

7 mm width oval cupped jaws Curved Without ratchet

SCANLAN®

D’Amico Mediastinoscopy ForcepsDeveloped in cooperation with Thomas A. D’Amico, MD

SCANLAN®


SCANLAN®



the code below to view a Video Demonstration of the D'Amico Mediastinoscopy

Biopsy Forceps

9009-230

9009-229


– 10 –


– 11 –

VATS

VATS

SCANLAN®

NEW Gonzalez-Rivas Lung Grasping ClampDeveloped in cooperation with Diego Gonzalez-Rivas, MD, FECTS

SCANLAN®

NEW Foerster Lung Grasping Clamp

VATS Procedures

n High tension design provides very secure grasp when retracting lung tissue anteriorly during Uniportal VATS procedures.

n 20 mm oval ring jaws provide an atraumatic, secure grasp that won’t tear or damage lung tissue.

n Unique 7 mm to 10 mm tapered shaft design. The finer 7 mm shaft provides improved visibility and ergonomics. The 10 mm pivot points provide strength and durability.

n May be used for grasping a well-folded sponge as a “sponge-stick” for both blunt dissection and to apply pressure for temporary control of bleeding.

VATS Procedures

n Unique 5 to 7 mm tapered shaft design. The finer 5 mm shaft is optimized for atraumatic insertion between the ribs and improved visibility and ergonomics. The 7 mm pivot points provide strength and durability.

n 20 mm oval ring jaws provide an atraumatic, secure grasp.

n Not recommended for use as a “sponge-stick.”


Working Length

Total Length

NEW9009-230

High tension Curved left 20 mm oval ring jaws With ratchet

7 mm Tapered

to10 mm

5 3/4” (14.5 cm)

9 3/4” (24.5 cm)


Working Length

Total Length

NEW9009-229

Curved left 20 mm oval ring jaws with ratchet

5 mm Tapered

to7 mm

9 1/4” (23.5 cm)

13 1/4”(33.5 cm)

SCANLAN®

Gonzalez-Rivas Lung Grasping ClampDeveloped in cooperation with Diego Gonzalez-Rivas, MD, FECTS

SCANLAN®

Foerster Lung Grasping Clamp


– 12 –


– 13 –

VATSSCANLAN®

Foerster Lung Grasping Clamps

VATS Procedures

n The 12 mm oval ring jaws provide an atraumatic, secure grasp that won’t tear or damage lung tissue.

n This instrument may also be used to grasp lymph nodes.

n This shorter length works well for smaller size patients, grasping lung tissue close to working ports/incisions.

n Choice of standard left curve jaw or right curve jaw (left-hand style).


VATS Procedures


n This instrument may also be used to grasp lymph nodes.

n This classic length works well for a variety of patient sizes for most multiple-port/incision or Uniportal VATS procedures.



Working Length

Total Length

9009-227Curved right jaws (left-hand style) 12 mm oval ring jaws With ratchet

7 mm 7 1/2” (19 cm)11 1/2” (29 cm)

9009-228Curved left jaws 12 mm oval ring jaws With ratchet


Working Length

Total Length

9009-226Curved left jaws12 mm oval ring jaws With ratchet

7 mm 9 1/4” (23.5 cm)13 1/4”

(33.5 cm)

9009-227

9009-228

9009-226

SCANLAN®


SCANLAN®



– 14 –


– 15 –

VATSSCANLAN®


VATS Procedures


n This shorter length works well for smaller size patients or when grasping lung tissue close to working ports/incisions.

n May be used for grasping a well-folded sponge to use as a “sponge-stick for both blunt dissection and to apply pressure for temporary control of bleeding.

n Choice of standard left curve jaw or right curve jaw (left-hand style).

VATS Procedures

n The oval ring jaws provide an atraumatic, secure grasp that won’t tear or damage lung tissue.

n This classic length works well for a variety of patient sizes and for most multi-port or Uniportal VATS procedures.

n May be used for grasping a well-folded sponge to use as a “sponge-stick for both blunt dissection and to apply pressure for temporary control of bleeding.

n NEW 25 x 35 mm oval ring jaws provide an atraumatic, secure grasp on delicate, friable tissue such as emphysematous lung tissue.


Working Length

Total Length

9909-921Curved right jaws (left-hand style) 20 mm oval ring jaws With ratchet

10 mm 7 1/2” (19 cm)11 1/2” (29 cm)



Working Length

Total Length


10 mm 9 1/2” (24 cm)

13 1/4” (33.5 cm)

9909-923Deep curved left jaws 20 mm oval ring jaws With ratchet

13” (33 cm)

NEW9909-924

Curved left jaws 25 x 35 mm oval ring jaws With ratchet

13 1/4” (33.5 cm)

9909-921

9909-920

9909-922

9909-923

9909-924

SCANLAN®


SCANLAN®



– 16 –


– 17 –

VATS

VATS

SCANLAN®

Duval Lung Grasping Clamps

SCANLAN®

Node Grasping Clamps

9909-926

9009-222

9909-927

9009-2239009-225

VATS Procedures

n The Duval triangular ring jaws provide an atraumatic, secure grasp.

n The triangular shaped jaws of the Duval clamp may be used during dissection of lymph nodes to securely grasp the nodes.


Working Length

Total Length

9909-926Curved left jaws1.0 cm width triangular ring jaws With ratchet

10 mm 9 1/4” (23.5 cm)13 1/2” (34 cm)

9909-927Curved left jaws2.5 cm width triangular ring jaws With ratchet


Working Length

Total Length

9009-222Straight jaws11 cm oblong ring jaws With ratchet

5 mm 9” (23 cm)13”

(33 cm)9009-223Curved jaws11 cm oblong ring jaws With ratchet

9009-225Curved jaws11 cm oblong ring jaws Without ratchet

SCANLAN®

Duval Lung Grasping Clamps

SCANLAN®

Node Grasping Clamps

VATS Procedures

n The small oval ring jaws provide a secure grasp of lymph nodes during lymph node dissection.

n May be used as a dissector during VATS procedures.

n The curved jaw improves visualization during VATS procedures.


n Not recommended for use as a lung grasper.


– 18 –


– 19 –

VATS

VATS

SCANLAN®

NEW Khan Decortication GrasperDeveloped in cooperation with Prof. Ali Zamir Khan, MS, FRCS(Glasg), FRCS(CTh), FEBTS, MBA

SCANLAN®

Allis Forceps (Clamp)

VATS Procedures

n Perfect for use during VATS decortication procedures.

n Can also be used for open thoracotomy decortication procedures.

n Robust grasper which securely grasps the thick, fibrous peel during decortication procedures.

n 20 mm oval ring jaws.

n Enhanced jaw serrations provide a secure grasp of thick, fibrous tissue.

n Reinforced jaws to withstand increased torque.

n One gold finger ring provides immediate differentiation between the Khan Decortication Grasper and a Foerster Lung Clamp.

n Not recommended for use as a lung grasper.


Working Length

Total Length

NEW9909-940

Enhanced serrations Curved left jaws With ratchet

10 mm 9 1/2” (24 cm)13 1/4”

(33.5 cm)


Working Length

Total Length

9009-270Curved left jaws6 mm width jaws With ratchet

7 mm 9” (23 cm)13 1/4”

(33.5 cm)

SCANLAN®

Khan Decortication GrasperDeveloped in cooperation with Prof. Ali Zamir Khan, MS, FRCS(Glasg), FRCS(CTh), FEBTS, MBA

SCANLAN®

Allis Forceps

VATS ProceduresMIS Procedures

Allis forceps are very useful for both VATS and MIS procedures to grasp and manipulate tissue such as:

n Lymph nodes

n Bronchus

n n Pericardium

n n Stiff or fibrous tissue

MIS

Kahn Decortication Grasper JawsCompared to

Foerster Clamp Jaws

9909-940Khan Decortification Grasper

9909-920Foerster Lung Clamp

9909-940

9009-270


– 20 –


– 21 –

VATSSCANLAN®

D’Amico DeBakey ClampsDeveloped in cooperation with Thomas A. D’Amico, MD

VATS Procedures

n The tapered jaws of these clamps were developed specifically to facilitate and ease dissection of key structures during VATS procedures.

n The curved jaws are perfect for blunt dissection to mobilize the artery, vein and bronchus.

n The straight jaws may be used as a guide prior to stapling by passing behind the mobilized artery, vein or bronchus to replicate the direction of the linear stapler.

n The straight jaws may be used to clamp the lung tissue parallel to the stapler when stapling the lung tissue; this creates even tissue tension which results in a smooth, even staple line.



Working Length

Total Length

9909-219

Curved left jawsTapered 1x2 DeBakey jaws 11cm jaw lengthWithout ratchet

10 mm

10” (25.4 cm)

14 1/2” (37 cm)

9909-221

Curved left jawsTapered 1x2 DeBakey jaws 11cm jaw length With ratchet

9909-222

Straight jawsTapered 1x2 DeBakey jaws 11.5 cm jaw length With ratchet

10 1/2” (27 cm)

14 3/4” (37.5 cm)


Working Length

Total Length

9009-280Curved left jawsSerrated jaws With ratchet

7 mm 9” (23 cm)13 1/4”

(33.5 cm)

9009-281Curved left jawsSerrated jaws Without ratchet

SCANLAN®

D’Amico DeBakey ClampsDeveloped in cooperation with Thomas A. D’Amico, MD

SCANLAN®

Dennis Dissector

9909-222

9909-221 9909-219

9009-2809009-281

D’Amico Tapered Jaw Tip Compared to

Chitwood DeBakey Jaw Tip

9909-221D’Amico curved tapered

1 x 2 DeBakey jaws

9909-912-13Chitwood curved 1 x 2 DeBakey jaws

SCANLAN®

Dennis DissectorVATS MIS


This versatile instrument has serrated jaws and may be used for both VATS and MIS procedures as a:

n n Dissector

n n Hemostat

n n Instrument that passes silk ties or a vessel loop into the operative field for encircling the artery, vein or bronchus.

n n Available with or without ratchets.


– 22 –


– 23 –

SCANLAN®

Chitwood DeBakey ClampsDeveloped in cooperation with W. Randolph Chitwood Jr. , MD

VATS MIS


Working Length

Total Length

9909-912

6.5 cm jaw length1x2 DeBakey jawsCurved left jaws With ratchet

10 mm

9” (23 cm)

12 3/4” (32.5 cm)

9909-912-13

10 cm jaw length1x2 DeBakey jaws Curved left jaws With ratchet 10”

(25.4 cm)14 1/4” (36 cm)

9909-232

10 cm jaw length2x3 DeBakey jaws Curved left jaws With ratchet

SCANLAN®


9909-232

VATS Procedures

n The rounded blunt ends of the jaws are perfect for blunt dissection to mobilize the artery, vein and bronchus.

n May be used as a guide prior to stapling by passing behind the mobilized artery, vein or bronchus to replicate the direction of the linear stapler.

n May be used to clamp the lung tissue parallel to the stapler when stapling the lung tissue; this creates even tissue tension which results in a smooth, even staple line.

MIS Procedures

n Used as an aortic cross-clamp for minimally invasive cardiac procedures such as valve replacement or repair.

n This clamp may be positioned on the aorta via a sub-axillary incision.

n The selection of jaw sizes accommodates a wide range of patient sizes and anatomy.

n The 1 x 2 DeBakey jaws provide an atraumatic and secure grasp of the aorta. The wider 2x3 DeBakey jaws of the 9909-232 clamp provide an even more gentle yet secure grasp of the aorta.

9909-912

9909-912-13

9909-912-131 x 2 DeBakey jaws

9909-2322 x 3 DeBakey jaws

DeBakey Jaw Styles


– 24 –


– 25 –

SCANLAN®


MIS

MIS Procedures

n Length optimized for smaller frame patients.

n Used for minimally invasive cardiac procedures such as valve replacement or repair.

n Choice of left or right curved jaws.

n Left curve jaw – recommended when the clamp is positioned on the aorta via a right sub-axillary incision so that the tips of the jaws point to the patient’s left shoulder.

n Right curve jaw – recommended when the clamp is positioned on the aorta via a left sub-axillary incision so that the tips of the jaws point to the patient’s right shoulder.

n Atraumatic 1 x 2 DeBakey jaws.


Working Length

Total Length

9909-914

7 cm jaw lengthCurved left jaw1x2 DeBakey jaws With ratchet

10 mm 6 3/4” (17 cm)10 3/8”

(26.4 cm)

9909-915

7 cm jaw lengthCurved right jaw1x2 DeBakey jaws With ratchet

SCANLAN®


9909-915

9909-914VATS Procedures

n Length optimized for smaller frame patients.

n The round blunt ends of the jaws are perfect for blunt dissection to mobilize the vein, artery and brochus.


– 26 –


– 27 –

SCANLAN®


MIS

SCANLAN®


SCANLAN®


MIS Procedures

n May be positioned on the aorta directly through a partial / hemi-sternotomy or a mini – thoracotomy incision.

n Angled shanks – keeps the handle out of the surgeon’s view and out of the surgeon’s working area.


MIS Procedures

n Shorter length optimized for smaller frame patients.

n The clamp may be positioned on the aorta via a right sub-axillary incision.

n Angled shanks – cause the handle to “hug” the patient’s right side after the clamp is positioned which keeps the handle out of the surgeon’s way.



Working Length

Total Length

NEW9909-234

8 cm jaw lengthCurved left jaws2 x 3 DeBakey jawsAngled shanks

10 mm 5 1/8” (13 cm)8”

(20.5 cm)


Working Length

Total Length

9909-913

7 cm jaw lengthCurved left jaws1 x 2 DeBakey jawsAngled shanks

10 mm 6 3/4” (17 cm)9 3/4”

(24.8 cm)

9909-234

9909-913

9009-210 and 9009-211Regular jaw tips (approximate size)

9009-212 and 9009 213 Fine jaw tips

(approximate size)

SCANLAN® Gonzalez-Rivas DissectorRegular Jaw Tips Compared to New Fine Jaw Tips

VATSSCANLAN®

Gonzalez-Rivas DissectorDeveloped in cooperation with Diego Gonzalez-Rivas, MD, FETCS

SCANLAN®

Gonzalez-Rivas DissectorDeveloped in cooperation with Diego Gonzalez-Rivas, MD, FECTS


Working Length

Total Length

9009-210Mixter-style 1 x 2 DeBakey jaws With ratchet

5 mm 7 1/2” (19 cm)11 1/2” (29 cm)

9009-211Mixter-style 1 x 2 DeBakey jaws Without ratchet

NEW9009-212

Mixter-style 1 x 2 DeBakey jawsFine tips With ratchet

NEW9009-213

Mixter-style 1 x 2 DeBakey jawsFine tips Without ratchet

VATS Procedures

n Low profile 5 mm shaft design.

n Mixter-style jaw facilitates dissection of key structures.

n Atraumatic 1x2 DeBakey jaws.

n NEW Fine tip selection now available.

n Choice of with or without ratchet.

9009-2109009-211

9009-2129009-213


– 28 –


– 29 –

9009-2409009-241

SCANLAN®



Working Length

Total Length

9009-240

6 cm jaw lengthCurved left jaws1 x 2 DeBakey jawsWith ratchet

5 mm 8 1/4” (21 cm)12 1/4” (31 cm)

9009-241

6 cm jaw lengthCurved left jaws1 x 2 DeBakey jawsWithout ratchet

SCANLAN®


VATS MIS


n This clamp may be used as an aortic cross-clamp for minimally invasive cardiac procedures for pediatric and small patients.

n The 1 x 2 DeBakey jaws provide an atraumatic and secure grasp of the aorta.

n VATS: The rounded blunt ends of the jaws are perfect for blunt dissection to mobilize the artery, vein and bronchus.



– 30 –


– 31 –

SCANLAN®

DeBakey Cooley ForcepsVATS MIS


n n Often referred to as a “Right Angle.”

n The fine yet blunt 90º angled jaws make this one of the key instruments used for blunt dissection to mobilize and encircle the artery, vein and bronchus.

n n Available with or without a ratchet.

VATS Procedures

n Sometimes referred to as a “Pedicle” or “Semb” clamp.

n The blunt ends and curved shapes of these jaws make them very useful instruments for blunt dissection to mobilize and encircle the artery, vein and bronchus for a wide range of patient anatomy.

n The tapered jaws of these clamps facilitate dissection.

n Available with or without ratchet.

SCANLAN®

DeBakey Cooley Clamps

SCANLAN®

Harken Clamps


Working Length

Total Length

9909-202 DeBakey Cooley JawsWith ratchet10 mm 9 1/2” (24 cm)

13 1/2” (34 cm)

9909-203 DeBakey Cooley JawsWithout ratchet

VATSSCANLAN®

Harken Clamps


Working Length

Total Length

9909-224

Harken #19.5 cm jaws Tapered 1x2 DeBakey jawsWithout ratchet

10 mm 9 7/8” (24.8 cm)14”

(35.5 cm)

9909-225

Harken #1 9.5 cm jaws Tapered 1x2 DeBakey jawsWith ratchet

9909-226

Harken #2 9.5 cm jaws Tapered 1x2 DeBakey jawsWithout ratchet

9909-227

Harken #2 9.5 cm jaws Tapered 1x2 DeBakey jawsWith ratchet

9909-2029909-203

9909-2249909-225

9909-2269909-227


– 32 –


– 33 –

SCANLAN®

Super Cut™ ScissorsVATS MIS

Scanlan® Super Cut™ Scissors have a unique asymmetric blade design that combines a razor edge with a scissors edge to provide a clean cut, and prevents pinching or slipping of tissue.

These scissors are handcrafted by artisans to ensure superior balance and tactile feel, thus providing the ultimate in cutting precision and control.


n n Used for dissection of fine tissue.

n Suggested for opening the pericardium.


n The rounded blunt blade ends of the 9909-910SC make this a very useful scissors for blunt dissection when isolating the vein, artery and bronchus; if desired, the ends can be made even more blunt if specified at the time of order.

n n Suggested for fibrous tissue and to excise the valve.

n n Wide blade design suggested for very fibrous tissue during decortication procedures and to excise calcified valves.

SCANLAN®

Chitwood Dissecting ScissorsDeveloped in cooperation with W. Randolph Chitwood Jr. , MD

SCANLAN®

Metzenbaum Scissors


Working Length

Total Length

9009-716SCStraight fine blades1 cm blade length Blunt micro tips

5 mm

6 1/2” (16.5 cm)

10 1/2” (27 cm)

9009-738SC

Chitwood dissecting scissorsCurved blades3 cm blade lengthBlunt tips

7 1/4” (18.5 cm)

11 1/2” (29 cm)


Working Length

Total Length

9909-910SCCurved blades3.5 cm blade lengthBlunt tips

10 mm 7 3/4” (19.5 cm)11 1/2” (29 cm)

9909-911SCCurved wide blades3.5 cm blade lengthBlunt tips

9009-716SC

9009-738SC

9909-910SC

9909-911SC


– 34 –


– 35 –

SCANLAN®

Axial Handle ForcepsVATS MIS


n n Shorter length optimized for:

n n Smaller frame patients

n MIS cardiac procedures

n Uniportal VATS procedures

n n Conventional open procedures in large patients and/or deep surgical sites.

n n Lower profile, lighter weight, 8 mm diameter diamond knurling provides a secure grip.

n n Jaw style: 2.5 mm width, 1x2 DeBakey jaws.


n n Innovative, ergonomic handle design provides superior balance and feel.

n n Perfect for surgeons who prefer thoracoscopic instruments that allow them to “roll the handles between their fingertips.”

n n All forceps styles are available with or without ratchets.

n n DeBakey Jaws – Used to atraumatically grasp and manipulate soft tissue. Available in 3 different widths for delicate to heavier tissue: 1.5 mm, 2.5 mm and 3.5 mm.

n n Russian Jaws – Used to atraumatically grasp and manipulate soft tissue.

n n Resano Jaws – The multi-tooth tips are used to securely grasp and manipulate fibrous or calcified tissue.

n n Platform Jaws – Used during suturing, – the slightly raised area on each tip provides a platform that facilitates both grasping the needle as it exits the tissue and passing it to the needle holder. DIAMOND DUST™ is “needle friendly” and will not burr or score needles and it can also be used to atraumatically grasp tissue.

SCANLAN®

Axial Handle Forceps

SCANLAN®

Axial Handle Forceps


Working Length

Total Length

9009-528 2.5 mm width DeBakey jaws Without ratchet 5 mm6 1/4”

(16 cm)12 1/2” (32 cm)


Working Length

Total Length

9009-510 2.5 mm width Resano jawsWithout ratchet

5 mm 8” (20 cm)14 1/4” (36 cm)

9009-511 2.5 mm width Resano jawsWith ratchet

9009-512 6 mm width Russian jaws Without ratchet

9009-513 6 mm width Russian jawsWith ratchet

9009-516 2 mm width Platform DIAMOND DUST™ jaws

Without ratchet

9009-517 2 mm width Platform DIAMOND DUST™ jaws

With ratchet

9009-520 1.5 mm width DeBakey jawsWithout ratchet

9009-521 1.5 mm width DeBakey jawsWith ratchet

9009-522 2.5 mm width DeBakey jaws Without ratchet

9009-523 2.5 mm width DeBakey jaws With ratchet

9009-524 3.5 mm width DeBakey jawsWithout ratchet

9009-525 3.5 mm width DeBakey jawsWith ratchet

9009-510 9009-511

9009-5129009-513

9009-5169009-517

9009-5209009-521

9009-5249009-525

9009-5229009-5239009-528


– 36 –


– 37 –

SCANLAN®

Spring Style Forceps

SCANLAN®

Spring Style Needle Holders

VATS MIS

VATS MIS


n n Jacobson spring-style handle design.

n n DeBakey Jaws – Used to atraumatically grasp and manipulate soft tissue.

n n Available in 2 different widths for delicate to slightly heavier tissue: 1 mm and 2 mm.


n n Jacobson spring-style handle design.

n n Scanlan® DIAMOND DUST™ jaws provide a very secure grip on the most delicate needles yet won’t burr or damage them.

SCANLAN®

Jacobson Spring Style Forceps Cat. No. Description Shaft

Working Length

Total Length

9009-420 1 mm width straight DeBakey jawsWithout ratchet5 mm 7 3/4” (19.5 cm)

16” (41 cm)

9009-422 2 mm width straight DeBakey jawsWithout ratchet

9009-420

9009-648

9009-422

9009-650

SCANLAN®

Jacobson Spring Style Needle Holders Cat. No. Description

Suture Size Shaft

Working Length

Total Length

9009-648 Straight DIAMOND DUST™ jaws

With ratchet 5-0and

Smaller5 mm 6 1/2” (16.5 cm)

15 3/8” (38.5 cm)

9009-650 Curved DIAMOND DUST™ jaws

With ratchet


– 38 –


– 39 –

SCANLAN®

Ring Handle Needle HoldersVATS MIS






n n Conventional open procedures in large patients and/or deep surgical sites

n n Lower profile, lighter weight, 7 mm shaft design.

n n Carbon-Inlay Jaws – provides a very secure grasp of larger sized needles.

n n Straight or curved jaws.

n n Gold ring handles.






n n Conventional open procedures in large patients and/or deep surgical sites

n n Lower profile, lighter weight, 5 mm shaft design.


SCANLAN®

Ring Handle Needle Holders

SCANLAN®


Cat. No. Description

Suture Size Shaft

Working Length

Total Length

9009-636

Straight jawsCarbon-inlay jawsGold ring handleWith ratchet 4-0

andSmaller

7 mm 6 1/4” (16 cm)11 1/4”

(28.5 cm)

9009-637

Curved jawsCarbon-inlay jawsGold ring handleWith ratchet

9009-638


andSmaller

9009-639



Suture Size Shaft

Working Length

Total Length

9009-618Straight jawsFine DIAMOND DUST™ jawsWith ratchet

5-0 and

Smaller5 mm 6 1/2” (16.5 cm)

10 1/2” (27 cm)

9009-636

9009-637

9009-638

9009-639

9009-618


– 40 –


– 41 –

SCANLAN®

Ring Handle Needle HoldersVATS MIS


n n These ring handle needle holders have the balance and confident feel of conventional ring handle needle holders.

n n Carbon-Inlay Jaws – provides a very secure grasp of the needle, even when driving the needle through fibrous or calcified tissue.

n n Straight and curved jaw styles.



n n These ring handle needle holders have the balance and confident feel of conventional ring handle needle holders.

n n Carbon-Inlay Jaws – provides a very secure grasp of the needle, even when driving the needle through fibrous or calcified tissue.



9909-610

9909-612

9009-640

9009-642

SCANLAN®


SCANLAN®



Suture Size Shaft

Working Length

Total Length

9909-610


andSmaller

10 mm 8 1/4” (21 cm)13 1/2” (34 cm)

9909-612



Suture Size Shaft

Working Length

Total Length

9009-640


andSmaller

7 mm 8 1/2” (21.5 cm)13 1/2” (34 cm)

9009-642



– 42 –


– 43 –

SCANLAN®

Axial Handle Needle HoldersVATS MIS

MIS Procedures

n Innovative, ergonomic handle design provides superior balance and feel.

n Perfect for surgeons who prefer thoracoscopic instruments that allow them to “roll the handles between their fingertips.”

n Scanlan® DIAMOND DUST™ jaws provide a very secure grip on the most delicate needles yet won’t burr or damage them.

n Straight and curved jaw styles.








SCANLAN®

Axial Handle Needle Holders

SCANLAN®



Suture Size Shaft

Working Length

Total Length


Without ratchet

7-0and

Smaller5 mm 8” (20 cm)

14 3/8” (36.5 cm)


With ratchet


Without ratchet


With ratchet


Suture Size Shaft

Working Length

Total Length


Without ratchet

5-0and


14 3/8” (36.5 cm)


With ratchet


Without ratchet


With ratchet

9009-5409009-541

9009-5509009-551

9009-5429009-543

9009-5529009-553


– 44 –


– 45 –

SCANLAN®

Axial Handle Needle HoldersVATS MIS




n n Carbon-Inlay Jaws – provides a secure grasp of the needle, even when driving the needle through fibrous or calcified tissue.

n n Gold-tipped handles.






n n Carbon-Inlay Jaws – provides a secure grasp of the needle, even when driving the needle through fibrous or calcified tissue.

n n Gold-tipped handles.



SCANLAN®


SCANLAN®



Suture Size Shaft

Working Length

Total Length

9009-570Straight Carbon-inlay jaws jawsGold tipped handleWithout ratchet

2-0and


14 3/8” (36.5 cm)

9009-571Straight Carbon-inlay jaws jawsGold tipped handle With ratchet

9009-572Curved Carbon-inlay jaws jawsGold tipped handle Without ratchet

9009-573Curved Carbon-inlay jaws jawsGold tipped handle With ratchet


Suture Size Shaft

Working Length

Total Length

9009-560Straight carbon-inlay jawsGold tipped handleWithout ratchet

4-0and


14 3/8” (36.5 cm)

9009-561Straight carbon-inlay jawsGold tipped handle With ratchet

9009-562Curved carbon-inlay jawsGold tipped handle Without ratchet

9009-563Curved carbon-inlay jawsGold tipped handle With ratchet

9009-5709009-571

9009-5729009-573

9009-5609009-561

9009-5629009-563


– 46 –


– 47 –

SCANLAN®

Chitwood Knot PusherDeveloped in cooperation with W. Randolph Chitwood Jr. , MD

VATS MIS


n n Enables surgeon to securely tie knots in deep operative fields through small incisions.

n n The “Trap Model” design securely holds suture during the tying procedure and prevents suture from slipping out.

n n The smooth edges of the “Trap Model” prevent the suture from fraying during the knot tying procedure.

n n Pediatric and adult lengths.

n n 2 tip styles:

n n Original “Trap Model”

n n Mini “Trap Model”

SCANLAN®

Chitwood Knot PusherDeveloped in cooperation with W. Randolph Chitwood Jr. , MD Cat. No. Description

Suture Size Shaft

Working Length

Total Length

9009-827-11 Pediatric Mini “Trap Model”

2-0and

Smaller5 mm

5 1/8” (13 cm)

11” (28 cm)

9009-827-12 Mini “Trap Model” 5 1/2” (14 cm)12”

(30.5 cm)

9009-828 Original “Trap Model” 6 1/8” (15.5 cm)12 1/2” (32 cm)

9009-828-16 Original “Trap Model” 7 1/4” (18.5 cm)15 3/4” (40 cm)

9009-827-11 (pediatric)9009-827-12

9009-8289009-828-16

Secure The "Trap Model"

design securely holds suture during the tying procedure and prevents suture from slipping out.

9009-827-12

9009-828

9009-828-16


the code below to view a Video Demonstration of the

Chitwood Knot Pusher


– 48 –


– 49 –

SCANLAN®

Chitwood Super Cut ™ Suture CutterDeveloped in cooperation with W. Randolph Chitwood Jr. , MD

VATS MIS


n n Enables surgeon to confidently and safely cut sutures in deep operative fields through small incisions.

n n Safety – the thickness of the footplate prevents inadvertently cutting the knot, and ensures the suture tags above the knot will always be the appropriate length.

n n Safety – the footplate design prevents inadvertently cutting any surrounding tissue.

n n The “Trap Model” design securely holds the suture when it is cut.

n n The Super Cut™ cutting mechanism ensures a clean suture cut without fraying.

n n The small profile “Trap Model” design easily fits into confined spaces.

n n Designed for cutting 2-0 and smaller suture.

n n Easily fits through a 12 mm endo port.

SCANLAN®

Chitwood Super Cut™ Suture CutterDeveloped in cooperation with W. Randolph Chitwood Jr. , MD Cat. No. Description

Suture Size Shaft

Working Length

Total Length

9009-838SC

Trap Model”2-0

andSmaller

5 mm

7” (18 cm)

11” (28 cm)

9009-840SC 9” (23 cm)13”

(33 cm)

9009-842SC 11” (28 cm)15”

(38 cm)

Safety• The thickness of the

footplate prevents inadvertently cutting the knot, and ensures the suture tags above the knot will always be the appropriate length.

• The footplate design prevents inadvertently cutting any surrounding tissue.

9009-838SC9009-840SC9009-842SC

9009-838SC

9009-840SC

9009-842SC


– 50 –


– 51 –

SCANLAN®

Wolf Suction InstrumentsDeveloped in cooperation with Randall K. Wolf, MD

VATS MIS


n n Curved low profile shaft design developed for VATS and MIS procedures.

n n Blunt Yankauer style suction tip provides effective suction and can safely be used for dissection.

n n Yankauer handle provides familiar, yet secure grip.

n n Pediatric (17 cm) and adult (22 cm) working lengths.

n n Option of with or without fingertip controlled suction regulator.

SCANLAN®

Wolf Suction InstrumentDeveloped in cooperation with Randall K. Wolf, MD Cat. No. Description Shaft

Working Length

Total Length

9009-908Pediatric Curved blunt tip 6 mm width tip

3.2 mm

6 3/4” (17 cm)

12 1/4” (31 cm)

9009-909

Pediatric Variable suction Curved blunt tip 6 mm width tip

9009-910 Curved blunt tip 6 mm width tip8 3/4”

(22 cm)14 1/4” (36 cm)

9009-911Variable suction Curved blunt tip 6 mm width tip

Enlarged to show detail

Designed with a unique tear-shaped port. The variable suction regulator allows for variable suction control.

9009-9089009-9099009-9109009-911

Variable Suction Regulator9009-909, 9009-911


– 52 –


– 53 –

SCANLAN®

Dennis Suction InstrumentsVATS MIS


n n 5 mm shaft and larger tip opening won’t clog during procedure.

n n Blunt Yankauer style suction tip provides effective suction and can be used as a dissector.

n n Yankauer style handle provides a familiar, yet secure grip.

n n Option of 22 cm or 32 cm working lengths.



Working Length

Total Length

9009-914 Curved blunt tip 7.5 mm width tip

5 mm

8 3/4” (22 cm)

14 1/4” (36 cm)

9009-915Variable suction Curved blunt tip 7.5 mm width tip

9009-916 Curved blunt tip 7.5 mm width tip12 1/2” (32 cm)

17 3/4” (45.5 cm)

9009-917Variable suction Curved blunt tip 7.5 mm width tip



SCANLAN®

Dennis Suction Instrument

9009-9149009-9159009-9169009-917



– 54 –


– 55 –

SCANLAN®

D’ Amico Suction Instruments Developed in cooperation with Thomas A. D’Amico, MD

SCANLAN®

Suction Accessories

VATS MIS

VATS MIS



Not actual length




n Tip is blunted so it can be safely used as a dissector.

n n Side holes at distal end provide gentle, yet very functional suction.

n n 5 mm shaft and tip opening will not clog during procedure.




n VATS drainage of empyema and decortication procedures.

n n Drainage of large hematoma and clots.

n Tip is blunted so it can be safely used for dissection.

n Sturdy design facilitates decortication.


n n Fits on standard suction tubing.



Working Length

Total Length

9009-900 Straight blunt tip 5 mm width tip

5 mm 12 1/2” (32 cm)17 3/4”

(45.5 cm)9009-901

Variable suction Straight blunt tip 5 mm width tip


Working Length

Total Length

9009-920 Straight blunt tip 10 mm width tip

10 mm 12 1/2” (32 cm)17 3/4”

(45.5 cm)9009-921

Variable suction Straight blunt tip10 mm width tip


Total Length

9009-905Brush set, pack of 10, for 5 mm D’Amico and 3.2 mm Wolf and Dennis suction instruments 19”

(48.3 cm)

9009-922 Brush set, pack of 10, for 10 mm D’Amico suction instruments

SCANLAN®

D’Amico Suction InstrumentDeveloped in cooperation with Thomas A. D’Amico, MD

SCANLAN®

D’Amico Suction InstrumentDeveloped in cooperation with Thomas A. D’Amico, MD


– 56 –


– 57 –

SCANLAN®

Stern Chest Tube Passer VATS MIS


n n Specifically designed to securely grasp chest tubes to exteriorize them through the chest wall.

n n Two lengths to accommodate a wide range of patient anatomy.

n n Available with and without ratchet.


Working Length

Total Length

4004-185 Without ratchet

10 mm

6 7/8” (17.5 cm)

9 3/4” (24.8 cm)

4004-186 With ratchet

4004-189 Without ratchet 11” (28 cm)14”

(35.6 cm)


Working Length

Total Length

9009-816 Straight 1.75 mm tip3.1 mm 7 1/2” (19 cm)

11 1/2” (29 cm)

9009-820 Straight3.1 mm tip

SCANLAN®

Stern Chest Tube Passer

SCANLAN®

Chitwood Suture PullerDeveloped in cooperation with W. Randolph Chitwood Jr. , MD

SCANLAN®

Chitwood Suture PullerDeveloped in cooperation with W. Randolph Chitwood Jr. , MD

MIS

4004-1854004-1864004-189

9009-816

9009-820

MIS Procedures

n Used during MIS procedures to exteriorize pericardial sutures through the chest wall.

n Selection of two sizes:

n 1.75 mm tapered tip for 4-0 and smaller suture.

n 3.1 mm tip for 2-0 and smaller suture.


– 58 –


– 59 –

SCANLAN®

Value Instrument Protector (V.I.P.™) Sterilization Trays

SCANLAN®


VATS MIS VATS MIS

n n Aluminum metal tray, silver-gray color.

n n Holds up to 20+ VATS / MIS instruments.

n n Tray insert with Scan-Guard™ silicone mat provides flexibility for positioning instruments in tray.

n n Recessed handle design is wrap-friendly and also makes it easier to stack trays in storage.

n n Single heavy duty, long-lasting ratchets on each side are glove-friendly and enable faster removal and securing of the lid.

n n Scan-Guard™ brackets in base have multiple vertical slots specifically designed to layer VATS / MIS instruments. The alternating 5 and 10 mm vertical slots enable the maximum storage of VATS / MIS instruments.

n n Sterilization compatibility: Conventional steam or Flash (immediate use) sterilization, Ethylene Oxide (ETO) and Plasma (gas) sterilization.

n n Firm sale.


n n Holds up to 12 VATS / MIS instruments.

n n Scan-Guard™ silicone brackets in base have multiple vertical slots that enable layering of instruments.


n n Heavy duty, long-lasting latches.

n n Firm sale.

Cat. No.

DimensionsW x L x H Notes

2145-03 10 1/2” x 21” x 2 1/2”27 cm x 53 cm x 6.4 cmHolds up to 12 VATS / MIS instruments Firm sale

Cat. No.


2146-03 10 1/4” x 21 3/4” x 4”26 cm x 55.2 cm x 10 cm

Additional tray insert with Scan-Guard™ Silicone mat, holds 20+ VATS / MIS instruments, Firm sale


– 60 –


– 61 –

VATS MIS VATS MIS


n n Holds up to 7 VATS / MIS instruments. (tray depth not sufficient to accommodate full curved instruments such as Harkens.)

n n Scan-Guard™ silicone mat on base provides flexibility for positioning instruments in tray.

n n 2” width Scan-Guard™ silicone mat on cover provides an area that securely holds delicate tips or small instruments and accessories.

n n Sterilization compatibility: Steam (conventional or flash), ETO and Plasma compatible.

n n Heavy duty, long lasting latches.

n n Firm sale.

Cat. No.


2139-03 10” x 15” x 1 1/2”25.4 cm x 38 cm x 3.8 cm

Scan-Guard™ silicone mat on base Partial mat on cover Holds up to 7 VATS / MIS instruments Firm sale

SCANLAN®


SCANLAN®



n n Holds up to 8 VATS / MIS instruments. (tray depth not sufficient to accomodate full curved instruments such as Harkens.)

n n Scan-Guard™ silicone mat provides flexibility for positioning instruments in tray.

n n Recessed handle design is wrap-friendly and also makes it easier to stack trays in storage.


n n Heavy duty, long-lasting ratchets.

n n Firm sale.

Cat. No.


2150-03 29” x 8 3/8” x 1 1/2”73.7 cm x 21.3 cm x 3.8 cm

Scan-Guard™ silicone mat on base,Holds up to 8 VATS / MIS instruments Firm sale


– 62 –


– 63 –

SCANLAN®

Instrument Modifications VATS MIS

Modifications to an instrument design to meet your specific needs are available at the time of order. Some of the most common modifications requested are below and photographs of some modifed instruments we have made are shown on this page.

Modifications to instruments are made at the time of order and modified instruments are firm sale.

Common modifications to customize an instrument include:

Jaw / Tip Modifications:

n n Angle jaws / tips

n n Angle and cut down jaws / tips

n n Cut down jaws / tips

Scissor Blade Modifications:

n n Cut down scissor blades

n n Blunt tips on blades

n n Sharpen tips on blades

Shank Modifications:

n n Angle shanks up

n n Angle shanks down

Ratchet Modifications:

n n Remove all ratchets

n n Remove partial ratchets

n n Add ratchets

Length Modifications:

n n Lengthen instrument

n n Shorten instrument

Other Modifications:

n n Modify tension

n n Special etching

Example 1

9909-926 Modified to have Ratchets Removed

Example 2

9909-912-13

Modified to have Jaws Angled and Shanks Angled Down


– 64 –

VATS MISSCANLAN®


Instrument Index Notes

VATS MISSCANLAN®


2139-03. . . . . . . . . . . . . . . . 602145-03. . . . . . . . . . . . . . . . 592146-03. . . . . . . . . . . . . . . . 582150-03. . . . . . . . . . . . . . . . 61 4004-185. . . . . . . . . . . . . . . 574004-186. . . . . . . . . . . . . . . 574004-189. . . . . . . . . . . . . . . 579009-210. . . . . . . . . . . . . . . 299009-211. . . . . . . . . . . . . . . 299009-212. . . . . . . . . . . . . . . 299009-213. . . . . . . . . . . . . . . 299009-222. . . . . . . . . . . . . . . 179009-223. . . . . . . . . . . . . . . 179009-225. . . . . . . . . . . . . . . 179009-226. . . . . . . . . . . . . . . 139009-227. . . . . . . . . . . . . . . 139009-228. . . . . . . . . . . . . . . 139009-229. . . . . . . . . . . . . . . 119009-230. . . . . . . . . . . . . . . 119009-240. . . . . . . . . . . . . . . 299009-241. . . . . . . . . . . . . . . 299009-270. . . . . . . . . . . . . . . 199009-280. . . . . . . . . . . . . . . 219009-281. . . . . . . . . . . . . . . 219009-300. . . . . . . . . . . . . . . . 99009-301. . . . . . . . . . . . . . . . 99009-302. . . . . . . . . . . . . . . . 79009-303. . . . . . . . . . . . . . . . 79009-310. . . . . . . . . . . . . . . . 99009-311. . . . . . . . . . . . . . . . 99009-312. . . . . . . . . . . . . . . . 79009-313. . . . . . . . . . . . . . . . 79009-420. . . . . . . . . . . . . . . 379009-422. . . . . . . . . . . . . . . 379009-510. . . . . . . . . . . . . . . 359009-511. . . . . . . . . . . . . . . 359009-512. . . . . . . . . . . . . . . 359009-513. . . . . . . . . . . . . . . 359009-516. . . . . . . . . . . . . . . 359009-517. . . . . . . . . . . . . . . 359009-520. . . . . . . . . . . . . . . 359009-521. . . . . . . . . . . . . . . 359009-522. . . . . . . . . . . . . . . 359009-523. . . . . . . . . . . . . . . 359009-524. . . . . . . . . . . . . . . 359009-525. . . . . . . . . . . . . . . 359009-528. . . . . . . . . . . . . . . 359009-540. . . . . . . . . . . . . . . 439009-541. . . . . . . . . . . . . . . 439009-542. . . . . . . . . . . . . . . 439009-543. . . . . . . . . . . . . . . 43

9009-550. . . . . . . . . . . . . . . 439009-551. . . . . . . . . . . . . . . 439009-552. . . . . . . . . . . . . . . 439009-553. . . . . . . . . . . . . . . 439009-560. . . . . . . . . . . . . . . 459009-561. . . . . . . . . . . . . . . 459009-562. . . . . . . . . . . . . . . 459009-563. . . . . . . . . . . . . . . 459009-570. . . . . . . . . . . . . . . 459009-571. . . . . . . . . . . . . . . 459009-572. . . . . . . . . . . . . . . 459009-573. . . . . . . . . . . . . . . 459009-618. . . . . . . . . . . . . . . 399009-636. . . . . . . . . . . . . . . 399009-637. . . . . . . . . . . . . . . 399009-638. . . . . . . . . . . . . . . 399009-639. . . . . . . . . . . . . . . 399009-640. . . . . . . . . . . . . . . 419009-642. . . . . . . . . . . . . . . 419009-648. . . . . . . . . . . . . . . 379009-650. . . . . . . . . . . . . . . 379009-716SC . . . . . . . . . . . . 339009-738SC . . . . . . . . . . . . 339009-816. . . . . . . . . . . . . . . 579009-820. . . . . . . . . . . . . . . 579009-828. . . . . . . . . . . . . . . 479009-828-11 . . . . . . . . . . . . 479009-828-12 . . . . . . . . . . . . 479009-828-16 . . . . . . . . . . . . 479009-838SC . . . . . . . . . . . . 499009-840SC . . . . . . . . . . . . 499009-842SC . . . . . . . . . . . . 499009-900. . . . . . . . . . . . . . . 559009-901. . . . . . . . . . . . . . . 559009-905. . . . . . . . . . . . . . . 559009-908. . . . . . . . . . . . . . . 519009-909. . . . . . . . . . . . . . . 519009-910. . . . . . . . . . . . . . . 519009-911. . . . . . . . . . . . . . . 519009-914. . . . . . . . . . . . . . . 539009-915. . . . . . . . . . . . . . . 539009-916. . . . . . . . . . . . . . . 539009-917. . . . . . . . . . . . . . . 539009-920. . . . . . . . . . . . . . . 559009-921. . . . . . . . . . . . . . . 559009-922. . . . . . . . . . . . . . . 559909-202. . . . . . . . . . . . . . . 319909-203. . . . . . . . . . . . . . . 319909-219. . . . . . . . . . . . . . . 219909-221. . . . . . . . . . . . . . . 219909-222. . . . . . . . . . . . . . . 21

9909-224. . . . . . . . . . . . . . . 319909-225. . . . . . . . . . . . . . . 319909-226. . . . . . . . . . . . . . . 319909-227. . . . . . . . . . . . . . . 319909-232. . . . . . . . . . . . . . . 239909-234. . . . . . . . . . . . . . . 279909-610. . . . . . . . . . . . . . . 419909-612. . . . . . . . . . . . . . . 419909-910SC . . . . . . . . . . . . 339909-911SC . . . . . . . . . . . . 339909-912. . . . . . . . . . . . . . . 239909-912-13 . . . . . . . . . . . . 239909-913. . . . . . . . . . . . . . . 279909-914. . . . . . . . . . . . . . . 259909-915. . . . . . . . . . . . . . . 259909-920. . . . . . . . . . . . . . . 159909-921. . . . . . . . . . . . . . . 159909-922. . . . . . . . . . . . . . . 159909-923. . . . . . . . . . . . . . . 159909-924. . . . . . . . . . . . . . . 159909-926. . . . . . . . . . . . . . . 179909-927. . . . . . . . . . . . . . . 179909-940. . . . . . . . . . . . . . . 19


– 66 –


– 67 –

VATS MISSCANLAN®


NotesNotes

VATS MISSCANLAN®


Inches

1

2

3

4

5

6

7

8

9

10

11

Centimeters

1 2 3 4 5 6 7 8 9 101 2 3 4

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30


SCANLAN® VATS / MIS Thoracoscopic / Minimally Invasive Instruments

For more information or to place an order,

please contact your local Scanlan representative,

or call...

U.S. & Canada: 800-328-9458 International: 651-298-0997

FAX: 651-298-0018www.scanlaninternational.com

MK-B-VTMI Rev. Iwc

SCANLAN VATS / MIS · 2019. 3. 20. · Cat. No. Description Shaft Working Length Total Length...

Documents

Transcript of SCANLAN VATS / MIS · 2019. 3. 20. · Cat. No. Description Shaft Working Length Total Length...