Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement
description
Transcript of Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement
![Page 1: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/1.jpg)
Scaling, Phasing, Anomalous, Density modification, Model
building, and Refinement
![Page 2: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/2.jpg)
What we’ve learned so far•Electrons scatter Xrays.
•Scattering is a Fourier transformation.
•Inverting the Fourier transform gives the image of the electron density.
•Waves have amplitude and phase. And we can’t measure phase.
•Inverting the Fourier transform without the phases gives the Patterson map, which is the map of all inter-atom vectors.
•Space groups are groups of symmetry operations in 3D.
•The Patterson plus symmetry gives us heavy atoms positions.
•Heavy atom positions plus amplitudes gives us phases.
![Page 3: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/3.jpg)
What we can do.•Sum waves.
•Calculate the phase given atom position and scattering vector.
•Index spots on an X-ray photograph.
•Draw Bragg planes.
•Invert the Fourier transform using Bragg planes.
•Calculate cell dimensions from an X-ray photograph.
•Describe the symmetry of a crystal or periodic pattern.
•Convert a simple Patterson to heavy atom positions.
•Calculate heavy atom vectors given heavy atom positions.
•Solve for phases given amplitudes and heavy atom vectors.
![Page 4: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/4.jpg)
From data to model
Collect native data: Fp Collect heavy atom data: Fph
Estimate phases
Calculate
Trace the map
Refine
Is the map traceable?
density modification?yes
no
![Page 5: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/5.jpg)
From data to phases
native data: Fp heavy atom data: Fph
Calculate difference Patterson
Find heavy atom peaks on Harker sections
Solve for heavy atom positions using symmetry
Calculate heavy atom vectors
Estimate phases
![Page 6: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/6.jpg)
From data to Patterson map
native data: Fp heavy atom data: Fph
Calculate difference Patterson
Find the best scale factor, k
Calculate Fdiff = k*|Fph| – |Fp|
![Page 7: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/7.jpg)
From crystal to data
native data: Fp
Indexed film
Intensity, Ip(hkl) = F2
I is relative
Bigger crystal, higher I
Better crystal, higher I
Longer exposure, higher I
More intense Xrays, higher I
Because there is no absolute scale: Fp and Fph are on different scales
Internal scaling
![Page 8: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/8.jpg)
What happens to the phase calculation if the scaling is off?
Radii are Fp and k*Fph
![Page 9: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/9.jpg)
Scaling two datasets
h k l Fp
1 0 0 3233. 100.2 0 0 2028. 98.3 0 0 2179 88.4 0 0 ....
...
h k l Fph
1 0 0 1122. 50.2 0 0 1014. 49.3 0 0 1081. 44.4 0 0 ....
...
<Fp> = <Fph>*k, therefore: k = <Fp>/<Fph>
1st approximation: The intrinsic average amplitude of scattering is constant for different crystals. A simple scale factor k corrects for crystal differences:
![Page 10: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/10.jpg)
Basic assumption
The total number of electrons in the unit cell is the same for each (isomorphous) crystal.
Note: isomorphous means “same space group, same cell dimensions.”
…when scaling two crystals.
![Page 11: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/11.jpg)
Better scaling: Wilson B-factor
<I>=<F2>
X-axis=Two sine-theta over lambda = 1/d
5Å 3Å 2Åd = 20Å
water peak (ignored in slope calc)
Region of linear dependence of amplitude with
resolution. Slope =W= “Wilson B-factor”
Two sets of F’s might have different overall B-factors, because the
crystals may have different degrees of mosaicity So Wilson scaling is better than simple scaling.
<Fp> = <Fph>*k, k=W(1/d) + C
Low-resolution features (ignored in slope calc)
Averaged in resolution bins
Scaled separately
![Page 12: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/12.jpg)
How good is scaling?
After solving the structure, we can go back and see how good the scaling was. Typically, error in scaling < 10%. In best cases < 2%.
Scaling error is worse if:
(1) crystals are non-isomorphous
(2) too many heavy atoms present (“basic assumption” is wrong).
![Page 13: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/13.jpg)
Heavy atom difference Fourier
•The amplitude of Fh is only approximately Fph-Fp.
•The true difference |Fph - Fp| depends on the phase of Fh relative to Fp
Fph = Fp + Fh (vector addition)
![Page 14: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/14.jpg)
Centrosymmetric reflections
•If the crystal has centrosymmetric symmetry, all reflections are centrosymmetric. Phase = 0° or 180°
•If the crystal has 2-fold, 4-fold or 6-fold rotational symmetry, then the reflections in the 0-plane are centrosymmetric. (Because the projection of the density is centrosymmetric)
For centrosymmetric reflections:
|Fph| = |Fp| ± |Fh|
This means the amplitude |Fh| is exact* for centrosymmetric reflections.
*assuming perfect scaling.
![Page 15: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/15.jpg)
0-plane
RRRR Draw any set of Bragg planes parallel to the 2-fold. The projected density is centrosymmetric.
Therefore, phase is 0 or 180°.
![Page 16: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/16.jpg)
Initial phasesThe most probable phase is not necessarily the “best” for computing the first e-density map.
weighted average, best phaseShaded regions are possible Fp and
Fph solutions.
![Page 17: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/17.jpg)
Figure of merit
Figure of merit “m” is a measure of how good the phases are.
C is the “center of mass” of a ring of phase probabilities (that’s the “mass”). The radius of the ring is 1. So m=1 only if the probabilities are sharply distributed. If they are distributed widely, m is small.
Fbest(hkl) = F(hkl)*m*e-ibest
![Page 18: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/18.jpg)
In class exercise: phase error
FP=5.00 =0.5
FPH1=5.50 =0.8 FH1=2.23 H1=-63.4°
FPH2=4.50 =0.9 FH2=0.50 H2=-164°
(1) Draw three circles separated by vectors FH1 and FH2.
(2) Draw circular “error bars” of width 2.
(3) Draw circle plot of Fp phase probabilities.
(4) Estimate the centroid c of probabilit.
(5) What is the Figure of Merit, m?
![Page 19: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/19.jpg)
Anomalous dispersion
Heavy atom free electrons
bound electrons
Inner electrons scatter with a time delay. This is a phase shift that is always counter-clockwise relative to the phase of the free electrons.
![Page 20: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/20.jpg)
Anomalous dispersion
![Page 21: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/21.jpg)
Anomalous dispersion
SIR = single isomorphous replacement
Advantages: only one derivative crystal is needed. (fewer scaling problems)
Anomalous dispersion has a greater effect at higher resolution. (because the inner electrons are more like a point source)
![Page 22: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/22.jpg)
Is the initial map good enough?
(1) The map is calculated using best.
(2) The map is contoured and displayed using {InsightII, MIDAS, XtalView, FRODO, O, ...}
(3) A “trace” is attempted.
![Page 23: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/23.jpg)
Model building
e- density cages (1 contours) displayed using InsightII
![Page 24: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/24.jpg)
Information used to build the first model:
Sequence and Stereochemistry
...plus assorted disulfide and ligand information.
Models are built initially by identifying characteristic sidechains (by their shape) then tracing forward and backward along the backbone density until all amino acids are in place.
Alpha-carbons can be placed by hand, and numbered, then an automated program will add the other atoms (MaxSprout).
![Page 25: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/25.jpg)
Tracing an electron density map
sequence: AGDLLEHEIFGMPPAGGA
Can you locate the density above in the sequence?
Class exercise:
![Page 26: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/26.jpg)
R-factor: How good is the model?
Depending on the space group, an R-factor of ~55% would be attainable by scaled random data.
The R-factor must be < ~50%.
Note: It is possible to get a high R-factor for a correct model. What kind of mistake would do this?
Calculate Fcalc’s based on the model. Compute R-factor
R=Fobs h( ) −Fcalc h( )
h∑
Fobs h( )h∑
![Page 27: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/27.jpg)
What can you do if the phases are not good enough?
1. Collect more heavy atom derivative data
2. Try density modification techniques.
Density modification :
Fo’s and (new) phases
Map Modified map
Fc’s and new phases
initial phases
![Page 28: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/28.jpg)
Density modification techniques
Solvent Flattening: Make the water part of the map flat.
(1) Draw envelope around protein part
(2) Set solvent to <> and back transform.
![Page 29: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/29.jpg)
Solvent flattening
Requires that the protein part can be distinguished from the solvent part. BC Wang’s method: Smooth the map using a 10Å Guassian. Then take the top X% of the map, where X is calculated from the crystal density.
![Page 30: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/30.jpg)
Skeletonization
(1) Calculate map.
(2) Skeletonize it (draw ridge lines)
(3) Prune skeleton so that it is “protein-like”
(4) Back transform the skeleton to get new phases.
Protein-like means: (a) no cycles, (b) no islands
![Page 31: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/31.jpg)
Non-crystallographic symmetry
If there are two molecules in the ASU, there is a matrix and vector that rotate one to the other: Mr1 + v = r2
(1) Using Patterson Correlation Function, find M and v.
(2) Calculate initial map.
(3) Set(r1) and (r2) to ((r1) + (r2) )/2
(4) Back transform to get new phases.
R R
RR
![Page 32: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/32.jpg)
What does a good map look like?
Before computers, maps were contoured on stacked pieces of plexiglass. A “Richards box” was used to build the model.
half-silvered mirror
plexiglass stack
brass parts model
![Page 33: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/33.jpg)
Low-resolution
At 4-6Å resolution, alpha helices look like sausages.
![Page 34: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/34.jpg)
Medium resolution
~3Å data is good enough to se the backbone with space inbetween.
![Page 35: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/35.jpg)
The program BONES traces the density automatically, if the phases are good.
![Page 36: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/36.jpg)
BONES models need to be manually connected and sidechains attached. MaxSPROUT converts a fully connected trace to an all-atom model.
![Page 37: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/37.jpg)
Errors in the phases make some connections ambiguous.
![Page 38: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/38.jpg)
Contouring at two density cutoffs sometimes helps
![Page 39: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/39.jpg)
Holes in rings are a good thing
Seeing a hole in a tyrosine or phenylalanine ring is universally accepted as proof of good phases. You need at least 2Å data.
![Page 40: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/40.jpg)
Can you see in stereo?
Try this at home. In 3D, the density is much easier to trace.
![Page 41: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/41.jpg)
New rendering programs
“CONSCRIPT: A program for generating electron density isosurfaces for presentation in protein crystallography.” M. C. Lawrence, P. D. Bourke
![Page 42: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/42.jpg)
Great map: holes in rings
![Page 43: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/43.jpg)
Superior map: Atomicity
Rarely is the data this good. 2 holes in Trp. All atoms separated.
![Page 44: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/44.jpg)
Only small molecule structures are this good
Atoms are separated down to several contours. Proteins are never this well-ordered. But this is what the density really looks like.
![Page 45: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/45.jpg)
Refinement
•The gradient* of the R-factor with respect to each atomic position may be calculated.
•Each atom is moved down-hill along the gradient.
•“Restraints” may be imposed.
dRfactor
dr v i
*
![Page 46: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/46.jpg)
What is a restraint?
A restraint is a function of the coordinates that is lowest when the coordinates are “ideal”, and which increases as the coordinates become less ideal..
Stereochemical restraints
bond lengths bond angles torsion angles
also...
planar groups
B’s
![Page 47: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/47.jpg)
Calculated phases, observed amplitudes = hybrid F's
•Fc’s are calculated from the atomic coordinates
•A new electron density map calculated from the Fc's would only reproduce the model. (of course!)
•Instead we use the observed amplitudes |Fo|, and the model phases, c.
ρ(v r ) = Fobs
v h ( )
h.
∑ e−i 2π
r h •r r ( )+α calc
r h ( )( )
Hybrid back transform:
Hybrid maps show places where the current model is wrong and needs to be changed.
![Page 48: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/48.jpg)
Difference map: Fo-Fc amplitudes
The Fo “native” map (Fo) differs from the Fc map (Fc) in places where the model is wrong. So we take the difference. In the difference map:
Missing atoms? (Fo-Fc) > 0.0
Wrongly placed atoms? (Fo-Fc) < 0.0
Correctly modeled atoms? (Fo-Fc) = 0.0
Q: Subtracting densities (real space) is the same as subtracting amplitudes (reciprocal space) and transforming. T or F?
![Page 49: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/49.jpg)
2Fo-Fc amplitudes
The Fo map plus the difference map is
Fo where the differences are zero (the atoms are correct)
Less than Fo where the model has wrong atoms.
Greater than Fo where the model is missing atoms.
Fo + (Fo-Fc) = 2Fo-Fc
![Page 50: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/50.jpg)
The “free R-factor”: cross-validation
The free R-factor is the test set residual, calculated the same as the R-factor, but on the “test set”.
Free R-factor asks “how well does your model predict the data it hasn’t seen?”
Rfree=Fobs h( ) −kFcalc h( )
h∈T∑
Fobs h( )h∈T∑
Note: the only difference is which hkl are used to calculate.
![Page 51: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/51.jpg)
Why cross-validate?If you have three points, you can fit them to a quadratic equation (3 parameters) with zero residual, but is it right?
Observed data
R-factor = 0.000!!
calculated
![Page 52: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/52.jpg)
Fitting and overfittingFit is correct if additional data, not used in fitting the curve, fall on the curve.
Low residual in the “test set” justifies the fit.
residual≠0
![Page 53: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/53.jpg)
cross-validation=Measuring the residual on data (the “test set”) that were not used to create the model.
The residual on test data is likely to be small if
is large.
a line has 2 parameters
dataparameters
![Page 54: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/54.jpg)
parameters versus dataExample from Drenth, Ch 13:
Papain crystal structure has 25,000 reflections.
Papain has 2000 non-H atoms
times 4 parameters each (x, y, z, B)
equals 8000 parameters
data/parameters = 25,000/8000 ≈ 3 <-- this is too small!
![Page 55: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/55.jpg)
restraints are “data”
bond lengths
bond angles
torsion angles
Bond lengths, angles, etc. are “measurements” that must be fit by the model. The true “residual” should include deviations from ideal bond lengths, angles, etc.
In practice, residual in restraints (e.g. deviations from ideal bond lengths, angles) is very low. This means that restraints are essentially “constraints”.
planar groupsvan der Waals
![Page 56: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/56.jpg)
constraints reduce the number of parameters
bond lengths
bond angles
Bond lengths, angles, and planar groups may be fixed to their ideal values during refinement (“Torsion angle refinement”).
Using constraints, Ser has 3 parameters, Phe 4, and Arg 6.
There are an average 3.5 torsion angles per residue.
Papain has ~700 torsion angle parameters.
data/parameter=25,000/700≈35 planar groups
![Page 57: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/57.jpg)
radius of convergence
total residual
parameter space
...=How far away from the truth can it be, and still find the truth?
radius of convergence depends on data & method.
More data = fewer false (local) minima
Better method = one that can overcome local minima
![Page 58: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/58.jpg)
Molecular dynamics w/ Xray refinement
MD samples conformational space while maintaining good geometry (low residual in restraints).
E = (residual of restraints) + (R-factor) dE/dxi is calculated for each atom i, then we move i downhill. Random vectors added, proportional to temperature T.
The simulated annealing MD method:
(1) start the simulation “hot”
(2) “cool” slowly, trapping structure in lowest minimum.
“X-plor” Axel Brünger et al
![Page 59: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/59.jpg)
Phase bias, and how to fix it.
The model biases the phases.
The effect of phase bias is local to the errors.
To correct a part of the model, we must first remove that part .
An “OMIT MAP” is calculated. The phases for an omit map are derived from a partial model, where some small part has been omitted.
![Page 60: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/60.jpg)
Omit maps
This residue has been removed before calculating Fc.
2Fo-Fc density = Fo + (Fo - Fc) = The native map plus the difference map.
![Page 61: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/61.jpg)
Two inhibitor peptides bound to thrombin. The inhibitors were omited from the Fc calculation. (stereo images)
FÉTHIÈRE et al, Protein Science (1996), 5: 1174- 1183.
![Page 62: Scaling, Phasing, Anomalous, Density modification, Model building, and Refinement](https://reader035.fdocuments.us/reader035/viewer/2022062314/56813d62550346895da73534/html5/thumbnails/62.jpg)
The final modelMonday, January 29, 2001 Structure Explorer - 1AAJ Page: 1
http://www.rcsb.org/pdb/cgi/explore.cgi?pid=9090980799705&pdbId=1AAJ
Structure Explorer - 1AAJ
Summary Information Summary InformationView StructureDownload/Display FileStructural NeighborsGeometryOther SourcesSequence Details
SearchLite SearchFields
Title: not availableCompound: Amicyanin (Apo Form)
Authors: R. C. E. Durley, L. Chen, L. W. Lim, F. S. MathewsExp. Method: X-ray DiffractionClassification: Electron Transport
Source: Paracoccus DenitrificansPrimary Citation: Durley, R., Chen, L., Lim, L. W., Mathews, F. S., Davidson, V. L.: Crystal structure
analysis of amicyanin and apoamicyanin from Paracoccus denitrificans at 2.0 A and 1.8 Aresolution. Protein Sci 2 pp. 739 (1993)[ Medline ]
Deposition Date: 09-Apr-1992 Release Date: 31-Oct-1993
Resolution [Å]: 1.80 R-Value: 0.155Space Group: P 21
Unit Cell: dim [Å]: a 28.95 b 56.54 c 27.55 angles [¯]: alpha90.00 beta 96.38 gamma 90.00
Polymer Chains: 1AAJ Residues: 105
Atoms: 905HET groups: HOH
© RCSB
ExploreExploreExplore
Other data commonly reported: total unique reflections, completeness, free R-factor