SCALE HOPPER & LEG EXT

Scale hopper Leg Extension Kits

Operator/Parts Manual

OM-72100-LEGEXT-0317 PRINTED IN U.S.A.

SCALE HOPPER & LEG EXT

2 2

PARTS ................................................................................................................................................................................3

Table of Contents

Table of Contents

Personnel operating or working around this equipment

should read this manual. This manual must be delivered with

equipment to its owner. Failure to read this manual and its

safety instructions is a misuse of the equipment. Any misuse

of the equipment may void the warranty.

SCALE HOPPER & LEG EXT

3 3

1. Refer to the proper layout view for the area of the machine.

2. Find illustration of the part to be ordered.

3. Note the ITEM number in the balloon point to the part.

4. On the parts list, find the ITEM number listed in the table.

5. Find the Quantity, Part Number, and Description associated with the ITEM number for use when placing

your order.

Paint For matching red paint, use Diamond Vogel IB5588, or equivalent paint.

Order supplies from

Abbreviations used in Parts List AS—Assembly

BKT—Bracket

ITM—Item

LH—Left hand side

NO— Number

OPT—Optional component

QTY—Quantity

RH—Right hand side

AR—As required (e.g. ft. of belt)

(part numbers for stainless conveyors are as

shown in illustrations but with XXXXX-8X

designation)

KSi Conveyors, Inc. 454 N State Route. 49

Cissna Park, IL 60924

Phone: 815-457-2403

888-574-2668

How to Order Parts

Parts

SCALE HOPPER & LEG EXT

4 4

Seed ladder

SEED LADDER KIT

72105-01

SCALE HOPPER & LEG EXT

5 5

Seed Ladder

ITM QTY PART NO. NAME

1 1 72002-00 SCALE HOPPER WELDMENT

2 4 72090-01 HANGER, SEED LADDER

3 1 24426-00 SEED LADDER

4 1 29260-00 SEED LADDER FRAME

5 4 72091-01 SUPPORT 59.46

6 4 72092-00 SUPPORT 52.66

7 1 29264-00 TRANSITION

* 1 HK-72105-01 HARDWARE KIT

* ITEM NOT SHOWN

SCALE HOPPER & LEG EXT

6 6

SCALE HOPPER LEG EXT KIT

72320-01 (1’)

1’ Leg Ext

SCALE HOPPER & LEG EXT

7 7

ITM QTY PART NO. NAME

1 4 24523-06 LOAD CELL

2 1 72002-00 SCALE HOPPER WELDMENT

3 4 72006-01 ANGLE

4 4 72096-00 LEG EXTENSION 1'

5 4 72151-00 SPACER, LOAD CELL - LEG EXT.

6 4 72159-02 LOCATING PLATE

7 1 72316-00 LADDER, 10' (CUT TO 9')

8 2 72331-01 PLATE, LADDER

9 1 72332-00 BRACKET, LADDER - HOPPER

* 1 HK-72100-02 HARDWARE KIT 150 W/2' LEG EXT

* ITEM NOT SHOWN

1’ Leg Ext

SCALE HOPPER & LEG EXT

8 8

SCALE HOPPER LEG EXT KIT

72231-01(225 UNIT), 72322-01(300 UNIT), 72323-01(375 UNIT) (1’)

1’ Leg Ext

SCALE HOPPER & LEG EXT

9 9

ITM QTY PART NO. NAME

1 4 24523-06 LOAD CELL

2 1 72002-00 SCALE HOPPER WELDMENT

3 4 72006-01 ANGLE

4 1 72028-01 EXTENSION, TOP SECTION, 300 UNITS

5 1 72028-02 EXTENSION, TOP SECTION, 225 UNITS

6 1 72028-03 EXTENSION, TOP SECTION, 375 UNITS

7 4 72096-00 LEG EXTENSION, 1'

8 4 72151-00 SPACER, LOAD CELL - LEG EXT.

9 4 72159-02 LOCATING PLATE

10 1 72316-00 LADDER, 10'

11 2 72317-00 LADDER, 13'

12 2 72319-01 PLATE, LADDER

13 2 72319-02 PLATE, LADDER

14 6 72331-01 PLATE, LADDER

15 3 72332-00 BRACKET, LADDER - HOPPER

* 1 HK-72100-02 HARDWARE KIT 150 W/2' LEG KIT

* ITEM NOT SHOWN

1’ Leg Ext

SCALE HOPPER & LEG EXT

10 10

3’ Leg Ext

SCALE HOPPER LEG EXT KIT

72320-03 (3’)

SCALE HOPPER & LEG EXT

11 11

3’ Leg Ext

ITM QTY PART NO. NAME

1 4 24523-06 LOAD CELL

2 1 72002-00 SCALE HOPPER WELDMENT

3 6 72005-07 CROSSBRACE, 3' EXT., AF

4 4 72006-01 ANGLE

5 4 72081-00 LEG EXTENSION, 3', AF/805

6 4 72151-00 SPACER, LOAD CELL - LEG EXT.

7 4 72159-02 LOCATING PLATE

8 1 72313-00 LADDER, 4'

9 1 72315-00 7' LADDER

10 2 72318-00 BRACKET, LADDER

11 2 72331-01 PLATE, LADDER

12 1 72332-00 BRACKET, LADDER - HOPPER

* 1 HK-72100-02 HARDWARE KIT, 150 W/2' LEG EXT

* ITEM NOT SHOWN

SCALE HOPPER & LEG EXT

12 12

SCALE HOPPER LEG EXT KIT

72320-05 (5’), 72320-05.5 (5’ 6”), 72320-06 (6’), 72320-06.5 (6’ 6”)

5’-6’ 6” Leg

SCALE HOPPER & LEG EXT

13 13

5' 5.5' 6' 6.5'

ITM QTY QTY QTY QTY PART NO. NAME

1 4 4 4 4 24523-06 LOAD CELL

2 1 1 1 1 72002-00 SCALE HOPPER WELDMENT

3 6 6 6 6 72005-05 CROSSBRACE, 5' & 6' EXT., AF

4 4 4 4 4 72006-01 ANGLE

5 4 0 0 0 72043-00 LEG EXTENSION, 5'

0 4 0 0 72304-00 LEG EXTENSION, 5' 6"

0 0 4 0 72044-00 LEG EXTENSION 6'

0 0 0 4 72157-00 LEG EXTENSION 6' 6"

6 1 1 1 1 72090-01 HANGER, SEED LADDER

7 4 4 4 4 72151-00 SPACER, LOAD CELL - LEG EXT.

8 4 4 4 4 72159-02 LOCATING PLATE

9 1 1 1 1 72313-00 LADDER, 4'

10 1 1 1 1 72315-00 7' LADDER

11 2 2 2 2 72318-00 BRACKET, LADDER

12 2 2 2 2 72331-01 PLATE, LADDER

13 1 1 1 1 72332-00 BRACKET, LADDER - HOPPER

* 1 1 1 1 HK-72100-05 HARDWARE KIT, 150 W/5' LEG EXT

*TIEM NOT SHOWN

5’-6’ 6” Leg

SCALE HOPPER & LEG EXT

14 14

5’-5’ 6” Leg

SCALE HOPPER & LEG EXT

15 15

ITM QTY PART NO. NAME

1 4 24523-06

2 1 72002-00 SCALE HOPPER WELDMENT

3 6 72005-05 CROSSBRACE, 5' & 6' EXT., AF

4 4 72006-01 ANGLE

5 1 72028-01 EXTENSION, TOP SECTION, 300 UNITS

6 1 72028-02 EXTENSION, TOP SECTION, 225 UNITS

7 1 72028-03 EXTENSION, TOP SECTION, 375 UNITS

8 4 72043-00 LEG EXTENSION, 5', AF/805

9 4 72151-00 SPACER, LOAD CELL - LEG EXT.

10 4 72159-02 LOCATING PLATE

11 3 72313-00 LADDER, 4'

12 2 72316-00 LADDER, 10'

13 1 72317-00 LADDER, 13'

14 6 72318-00 BRACKET, LADDER

15 1 72319-01 PLATE, LADDER

16 1 72319-02 PLATE, LADDER

17 6 72331-01 PLATE, LADDER

18 3 72332-00 BRACKET, LADDER - HOPPER

* 1 HK-72100-05 HARDWARE KIT, 150 W/5' LEG EXT

* ITEM NOT SHOWN

SCALE HOPPER LEG EXT KIT

72321-05, 72322-05, 72323-05 (5’)

SCALE HOPPER LEG EXT KIT

72321-05.5, 72322-05.5, 72323-05.5 (5’ 6”)

1. All ladders are the same except for the 7’ common ladder instead of the 4’ common ladder for the 300 unit.

5’-5’ 6” Leg

SCALE HOPPER & LEG EXT

16 16

7’- 10’ Leg Ext

SCALE HOPPER LEG EXT KIT

72320-07 (7’), 73320-07.5 (7’ 6”), 72320-08 (8’), 72320-08.5 (8’ 6”),

72320-10 (10’)

SCALE HOPPER & LEG EXT

17 17

7' 7.5' 8' 8.5' 10'

ITM QTY QTY QTY QTY QTY PART NO. NAME

1 4 4 4 4 4 24523-06 LOAD CELL

2 1 1 1 1 1 72002-00 SCALE HOPPER WELDMENT

3 4 4 4 4 4 72006-01 ANGLE

4 6 6 6 6 6 72006-02 CROSS BRACE, 8' EXT

5 4 0 0 0 0 72147-00 LEG EXTENSION, 7'

0 4 0 0 0 72144-00 LEG EXTENSION, 7.5'

0 0 4 0 0 72045-00 LEG EXTENSION, 8'

0 0 0 4 0 72085-00 LEG EXTENSION, 8.5'

0 0 0 0 4 72158-00 LEG EXTENSION 10'

6 4 4 4 4 4 72151-00 SPACER, LOAD CELL - LEG EXT.

7 4 4 4 4 4 72159-02 LOCATING PLATE

8 2 2 2 2 2 72315-00 7' LADDER

9 2 2 2 2 2 72318-00 BRACKET, LADDER

10 2 2 2 2 2 72331-01 PLATE, LADDER

11 1 1 1 1 1 72332-00 BRACKET, LADDER - HOPPER

* 1 1 1 1 1 HK-72100-08 HARDWARE KIT, 150 W/8' LEG EXT

* ITEM NOT SHOWN

7’’- 10’ Leg Ext

SCALE HOPPER & LEG EXT

18 18

SCALE HOPPER & LEG EXT

19 19

SCALE HOPPER LEG EXT KIT

72321-07, 72322-07, 72323-07 (7’)

ITM QTY PART NO. NAME

1 4 24523-06 LOAD CELL

2 1 72002-00 SCALE HOPPER WELDMENT

3 4 72006-01 ANGLE

4 6 72006-02 CROSS BRACE, 8' EXT, AF

5 1 72028-01 EXTENSION, TOP SECTION, 300 UNITS

6 1 72028-02 EXTENSION, TOP SECTION, 225 UNITS

7 1 72028-03 EXTENSION, TOP SECTION, 375 UNITS

8 4 72147-00 LEG EXTENSION, 7', KSI 150

9 4 72151-00 SPACER, LOAD CELL - LEG EXT.

10 4 72159-02 LOCATING PLATE

11 2 72314-00 LADDER, 5'

12 1 72315-00 LADDER 7'

13 2 72316-00 LADDER, 10'

14 1 72317-00 LADDER, 13'

15 6 72318-00 BRACKET, LADDER

16 1 72319-01 PLATE, LADDER

17 1 72319-02 PLATE, LADDER

18 6 72331-01 PLATE, LADDER

19 3 72332-00 BRACKET, LADDER - HOPPER

* 1 HK-72100-05 HARDWARE KIT, 150 W/5' LEG EXT

* ITEM NOT SHOWN

SCALE HOPPER LEG EXT KIT

72321-07.5, 72322-07.5, 72323-07.5 (7’ 6”)

1. All ladders are the same except for the 7’ common ladder instead of the 5’ common ladder for the 225 unit.

SCALE HOPPER & LEG EXT

20 20

SCALE HOPPER & LEG EXT

21 21

SCALE HOPPER LEG EXT KIT

72321-08, 72322-08, 72323-08 (8’)

ITM QTY PART NO. NAME

1 4 24523-06 LOAD CELL

2 1 72002-00 SCALE HOPPER WELDMENT

3 4 72006-01 ANGLE

4 6 72006-02 CROSS BRACE, 8' EXT, AF

5 1 72028-01 EXTENSION, TOP SECTION, 300 UNITS

6 1 72028-02 EXTENSION, TOP SECTION, 225 UNITS

7 1 72028-03 EXTENSION, TOP SECTION, 375 UNITS

8 4 72045-00 LEG EXTENSION, 8', AF/805

9 4 72151-00 SPACER, LOAD CELL - LEG EXT.

10 4 72159-02 LOCATING PLATE

11 3 72315-00 LADDER 7'

12 2 72316-00 LADDER, 10'

13 1 72317-00 LADDER, 13'

14 6 72318-00 BRACKET, LADDER

15 1 72319-01 PLATE, LADDER

16 1 72319-02 PLATE, LADDER

17 6 72331-01 PLATE, LADDER

18 3 72332-00 BRACKET, LADDER - HOPPER

* 1 HK-72100-08 HARDWARE KIT, 150 W/8' LEG EXT

* ITEM NOT SHOWN

SCALE HOPPER LEG EXT KIT

72321-08.5, 72322-08.5, 72323-08.5 (8’ 6”)

1. All ladders are the same except for the 10’ common ladder instead of the 7’ common ladder for the 300 unit.

SCALE HOPPER LEG EXT KIT

72321-10, 72322-10, 72323-10 (10’

1. All ladders are the same except for the 10’ common ladder instead of the 7’ common ladder for the 225 unit.

SCALE HOPPER & LEG EXT

22 22

SCALE HOPPER 225 UNIT EXT KIT

72104-01

SCALE HOPPER & LEG EXT

23 23

ITM QTY PART NO. NAME

1 1 72002-00 SCALE HOPPER WELDMENT

2 4 72028-02 EXTENSION, TOP SECTION, 225 UNITS

3 4 72029-01 STRAP, SCALE HOPPER

4 4 72030-02 BRACE, WALL EXTENSION, 225

* 44 HB375F100-C-8Z BOLT, FLANGE (3/8" X 1") , GRADE 8

* 44 HN375F-C-2Z 3/8" FLANGE NUT

* ITEM NOT SHOWN.

SCALE HOPPER & LEG EXT

24 24

SCALE HOPPER 300 UNIT EXT KIT

72104-02

SCALE HOPPER & LEG EXT

25 25

ITM QTY PART NO. NAME

1 1 72002-00 SCALE HOPPER WELDMENT

2 4 72028-01 EXTENSION, TOP SECTION, 225 UNITS

3 4 72029-01 STRAP, SCALE HOPPER

4 4 72030-01 BRACE, WALL EXTENSION, 225

* 60 HB375F100-C-8Z BOLT, FLANGE (3/8" X 1") , GRADE 8

* 60 HN375F-C-2Z 3/8" FLANGE NUT

* ITEM NOT SHOWN.

SCALE HOPPER & LEG EXT

26 26

SCALE HOPPER 375 UNIT EXT KIT

72104-03

SCALE HOPPER & LEG EXT

27 27

ITM QTY PART NO. NAME

1 1 72002-00 SCALE HOPPER WELDMENT

2 4 72028-03 EXTENSION, TOP SECTION, 225 UNITS

3 4 72029-01 STRAP, SCALE HOPPER

4 4 72030-03 BRACE, WALL EXTENSION, 225

* 84 HB375F100-C-8Z BOLT, FLANGE (3/8" X 1") , GRADE 8

* 84 HN375F-C-2Z 3/8" FLANGE NUT

* ITEM NOT SHOWN.