Saving lives and money by implementing the CLOCS National ... · Driver training. You can prevent...
Transcript of Saving lives and money by implementing the CLOCS National ... · Driver training. You can prevent...
Saving lives and money by implementing the CLOCS National Standard Derek Rees Project Director, CLOCS Chief Executive, SECBE
www.CLOCS.org.uk
Content
1. How bad is the problem? 2. Cost of action & inaction 3. About CLOCS 4. CLOCS Site Compliance
checklist and monitoring 5. Mulalley – a CLOCS
Champion’s experience 6. Taking action to help
yourselves and others
7. Questions? During & at end
Summary of 2013-15 VRU KSIs involving HGVs
Pedestrians Cycles Motorcyles Total
each year share
East Midlands 13.7 34% 8.3 21% 18.0 45% 40Eastern 17.0 36% 10.7 22% 20.0 42% 48London 40.7 49% 22.0 27% 19.7 24% 82North East 7.3 43% 5.0 29% 4.7 27% 17North West 22.0 40% 16.3 30% 16.0 29% 54South East 34.0 37% 23.7 26% 34.0 37% 92South West 15.7 33% 11.7 24% 20.7 43% 48West Midlands 18.7 51% 9.3 25% 8.7 24% 37Yorkshire/Humberside 15.7 37% 11.7 28% 15.0 35% 42Wales 7.3 42% 3.3 19% 6.7 38% 17
192 40% 122 25% 163 35% 477
KSI/year/ million population
8.82
8.1510.07
6.55 7.70 10.62 9.08
6.558.015.66
And its going to get worse without action ……..
• Government policies to tackle emissions, congestion & obesity
= x5 increase non-vehicle journeys
• Population Growth
= More homes & infrastructure
= more HGV journeys
• Plan for road safety
• Procure safe companies
• Construction Logistics Plans
• Safe routing • Delivery
management • Site conditions • Vehicle choice • Driver training
You can prevent injury by simple actions
Costs and benefits
Benefits of action: • Ethical & legal duties to
protect • Staff • Suppliers • Community
• Win more work • Protect reputation • Cut costs
• Vehicle utilisation • Insurance premiums
Cost of inaction: • Site operators
• Risk injury • Refusal
• Fleet operators • Reputation • Exclusion
• Communities • Disruption
• Families • Tragedy
Industry team driving CLOCS adoption & implementation across UK
Annual self-assessment & forward planning
Assurance model
Site/project compliance
Corporate plan/journey
CLOCS monitoring
Improving the image of construction - 2017 | 15
CLOCS monitoring is designed to establish whether the client/principal contractor is achieving compliance with the CLOCS National Standard. The Standard itself includes a number of requirements, some of which are mandatory (designated by ‘shall’ within the Standard) while others are recommended or optional (designated by ‘should’ and ‘may’). As well as looking to establish compliance, the monitoring process aims to recognise those sites going beyond compliance and share best practice with the aim of raising standards across the industry.
CLOCS monitoring checklist
Improving the image of construction - 2017 | 16
Checklist based on the CLOCS National Standard looking specifically at sections 3.4.1 to 3.4.7. The shaded questions highlighted in bold indicate the compliance requirements of the Standard, while the non-bolded questions look to establish and capture performance beyond these minimum requirements.
CONSTRUCTION LOGISTICS PLAN (3.4.1)
Improving the image of construction - 2017 | 17
Clients shall ensure that a Construction Logistics Plan is in place and is fully complied with. Clients should approach this in a spirit of partnership with fleet operators who may have valuable views on how to achieve safety goals Is there evidence of an approved Construction Logistics Plan (CLP) that includes measures to
minimise vehicle trips, and reduce opportunities for collisions with vulnerable road users e.g. sites near schools.
Does it appear that the CLP is being fully complied with?
Have fleet operators been consulted in the development of the CLP?
Is there evidence that the CLP is regularly reviewed and revised?
SUITABILITY OF SITE FOR VEHICLES FITTED WITH SAFETY FEATURES (3.4.2)
Improving the image of construction - 2017 | 18
Clients shall ensure conditions of site are suitable for vehicles fitted with safety features and side under-run protection Does gradient appear to be acceptable for vehicle fitted with safety features and side under-run
protection?
Are regular reviews of the topography of the site completed and, where necessary, are diversions implemented as the site landscape changes?
Is the ground graded where the construction phase allows?
SITE ACCESS AND EGRESS (3.4.3)
Improving the image of construction - 2017 | 19
Clients shall ensure that access to and egress from the site is appropriately managed, clearly marked, understood and clear of obstacles. Is the access to and egress from the site appropriately managed, clearly marked, understood
and clear of obstacles?
Has the site attempted to eliminate hazards by design, e.g. one way systems, traffic lights and calming measures?
Where visibility is restricted or where it is deemed necessary, is a trained traffic marshal available to assist with vehicle manoeuvring?
Has the site considered the use of additional equipment such as blind-spot safety mirrors to aid the driver’s view of the road?
Can the site demonstrate suitable traffic marshal training has been carried out for all appropriate personnel?
VEHICLE LOADING AND UNLOADING (3.4.4)
Improving the image of construction - 2017 | 20
Clients shall ensure that vehicles are loaded and unloaded onsite as far as is practicable.
Are vehicles loaded and unloaded on site as far as is practicable?
Is there a stable, graded surface on-site for vehicle loading and unloading?
Is an appropriate trained person nominated to manage all deliveries and collections to site and supervise the loading and unloading process?
Has a suitable ‘off-loading area’ been identified with approved loading and unloading plans in place where it is not possible to unload on site?
Where loading/unloading takes place offsite, is this properly managed and segregated from the public?
TRAFFIC ROUTING (3.4.5)
Improving the image of construction - 2017 | 21
Clients shall ensure that a suitable risk-assessed vehicle route to the site is specified and that the route is communicated to all contractors and drivers. Clients shall make contractors and any other service suppliers aware that they are to use these routes at all times unless unavoidable diversions occur. Has a suitable, risk assessed vehicle route been specified?
Has the route been communicated to all contractors [fleet operators] and drivers and have they been advised that the route must be used at all times unless unavoidable diversions occur?
Are the circumstances (if any) under which drivers may deviate from the specific route such as road closures, or road traffic accidents clearly specified?
Have steps been taken to minimise left hand turns where possible and appropriate?
Are maps or any other vehicle routing information issued to companies and drivers accessing the site?
Are route deviations checked, recorded and analysed and are appropriate route issues communicated to operators, e.g. accidents, road closures, etc.
Where appropriate, has the site considered the use of additional equipment such as blind spot safety mirrors or LED indicator trailer lights at high risk junctions in the vicinity of the site?
CONTROL OF SITE TRAFFIC PARTICULARLY AT PEAK HOURS (3.4.6)
Improving the image of construction - 2017 | 22
Clients shall consider other options to plan and control vehicles and reduce peak hour deliveries. Has consideration been given to other options to plan and control vehicles and reduce peak
hour deliveries?
Does the CLP demonstrate the options that they have considered and acted upon to reduce the amount of trips to site during peak hours e.g. web/paper based delivery booking systems, consolidation centres, vehicle holding areas, off-peak deliveries or alternative modes?
Where restrictions are imposed on delivery times, are these being adhered to?
SUPPLY CHAIN COMPLIANCE (3.4.7)
Improving the image of construction - 2017 | 23
Clients shall ensure contractor and subcontractor compliance with requirements 3.1.1 to 3.3.2 Are procedures in place to ensure that contractors and subcontractors comply with CLOCS
National Standards 3.1.1 to 3.3.2?
Is vehicle compliance being checked at the gate?
Do discussions with the gate staff demonstrate that checks are being made in line with procedures?
If non-compliance is identified, is corrective action taken, including notification of the non-compliance issue to both driver and the fleet operator?
Has confirmation been sought from the fleet operator that appropriate remedial action has been undertaken?
Scoring
Improving the image of construction - 2017 | 24
Each of the seven sections of the Checklist will be individually scored to reflect the level of performance established by the monitoring process.
Descriptor Explanation of score descriptor Score
Non-compliance Indicates that there was no evidence at all of the Standard being met 0
Minor non-compliance
Indicates that although the Standard is not being fully met, there is evidence that efforts are being made albeit with room for improvement 1
Compliance Indicates that the compliance requirements of the Standard are being met 2
Beyond Compliance Indicates performance beyond the compliance requirements of the Standard are being met, and that additional best practice processes, activities or initiatives were witnessed 3
Therefore a total of 21 point are available.
Additionally, each site will be rated as compliant or non-compliant with a compliant rating only awarded where all seven sections are found to be compliant.
Arranging visits and fees payable
Improving the image of construction - 2017 | 25
CLOCS visits can be booked when registering a project with the Considerate Constructors Scheme.
• A fee of £200+VAT is payable where only 1 CLOCS visit is required • A fee of £350+VAT applies where 2 CLOCS visits are wanted.
These visits will be aligned to the standard CCS monitoring visits to reduce travel costs.
A registered site can also book a CLOCS visit at any time but if scheduled separately to a normal CCS visit, a higher fee of £250+VAT applies due to the increased travel costs incurred.
A non-registered site can also request CLOCS visits and these are available at £300+VAT per visit due to the additional administrative work required.
Who I am: ◦ 3.5 years experience in CLOCS
◦ LB Camden CLOCS trial – procurement and
planning
◦ Joined Mulalley to assist implementation
What I will cover: ◦ Our CLOCS journey
◦ Progress to date
◦ Benefits and challenges
◦ Experience of checklist
◦ Recommendations
FORS: bronze 2014 – gold achieved Jan 2017
CLOCS awareness: press and contractual requirement
CLOCS Champion status: board adoption and resourcing
CLOCS implementation plan: 25% sites by end of 2017; 75% of sites by end of 2018
Addition of CLOCS to Contract Plan templates
CLOCS in procurement orders and letter to supply chain
Engagement with sites and training
Creation of electronic CLOCS checklist template
2 x monitoring visits by CCS
Committed to reducing WRRR
Mitigating risk
Enhanced reputation and reduced community impact
Construction logistics
Complementary to other initiatives: ◦ Considerate Constructors Scheme founder member ◦ British Safety Council award (23 consecutive years) and RoSPA Gold Medal
winners (past 4 years) ◦ Carbon neutrality and sustainability
Comprehending CLOCS requirements
Implementing CLOCS into processes
Training staff
Supply chain knowledge of CLOCS
Herbrand Estate, Camden:
◦ Compliant: “The team have enthusiastically embraced CLOCS putting time and energy into ensuring that rigorous processes are in place.”
◦ Recommendation for improved signage/ identification of traffic marshals
Chauncy ultra-site, Herts:
◦ Compliant - scored 19/21
◦ Following construction logistics plan
◦ Gate checks taking place
◦ Recommendations being adopted
Get buy-in and start small ◦ Convey risks and benefits of complying ◦ Start with one flagship project
Use free templates, resources and training: ◦ CCS e-learning on vulnerable users and CLOCS
video ◦ CLOCS toolkit can be adapted/ company
branded ◦ CLP course and free FORS e-learning/ courses
Communications and efficiency ◦ Key points, simplicity ◦ Use risk-based approach ◦ Utilise technology
Actions for all
1. Adopt CLOCS National Standard as your standard
2. Communicate internally & externally
1. Ensure understanding & commitment at every level
2. Key partners and their supply chain
3. Implement on all projects – new sites and existing sites where practicable
4. Get involved in CLOCS development – ensure it becomes even more relevant and helpful to your business to protect your staff, suppliers, community and your reputation
5. Collect and share data and best practice – inform and accelerate industry progress towards zero incidents and accidents from construction traffic