Multipage SATR Page 1SAUDI ARAMCO ID/PID - 18-MAY-05 - REV 0 (Standards Cutoff - JUNE 2008)REV 330-Jun-08SAUDI ARAMCO TEST REPORTSATR NUMBERDATE APPROVEDQR NUMBERGalvanic CP TestingSATR-X-3101CP-PROJECT TITLEWBS / BI / JO NUMBERCONTRACTOR / SUBCONTRACTOREQUIPMENT ID NUMBER(S)EQUIPMENT DESCRIPTIONEQPT CODESYSTEM ID.PLANT NO.LAYOUT DRAWING NUMBERREV. NO.PURCHASE ORDER NUMBEREC / PMCC / MCC NO.SCHEDULED TEST DATE & TIMEACTUAL TEST DATE & TIMEQUANTITY INSP.MH's SPENTTRAVEL TIMESAUDI ARAMCO USE ONLYSAUDI ARAMCO TIP NUMBERSAUDI ARAMCO ACTIVITY NUMBERWORK PERMIT REQUIRED?SAUDI ARAMCO INSPECTION LEVELCONTRACTOR INSPECTION LEVELITEM No.TEST PROCEDURE ACCEPTANCE CRITERIAREFERENCEPASSFAILN/ARE-TEST DATEA. PROCEDUREA1Ensure that the proper voltmeters and ammeters and suitable reference electrodes was used for CP testing.SAES-X-400Sec. 3.1A2Check the meter batteries periodically to ensure they still function properly. Generally, they should be replaced every year.SAES-X-400Sec. 3.1A3Ensure that all meters was calibrated.SAES-X-400Sec. 3.1A4Ensure that high input impedance meters for structure-to-electrolyte potential measurements, especially in areas of high resistivity was used. Input impedance should be 20 megohms or greater.SAES-X-400Sec. 3.1A5Use a clamp-on-ammeter for the direct measurements of DC currents. Meters having current measuring capacity up to 200 amps and a variety of clamp sizes are preferred.SAES-X-400Sec. 3.1A6Ensure that the copper-copper sulfate and silver-silver chloride reference electrodes was properly maintained.SAES-X-400Sec. 3.1A7Check test leads of voltmeters used for structure-to-electrolyte measurements periodically, for continuity and integrity. Repair or replace faulty leads or connections before making measurements.SAES-X-400Sec. 3.1A8The minimum design life for galvanic or impressed current anode systems shall be either 7 years, or the testing and inspection (T&I) period, whichever is greater.SAES-X-500Sec. 4.3.1B. TEST EQUIPMENT AND MATERIALS CRITERIAB1. MultimeterC. TEST RESULTSEQUIPMENT IDENTIFICATIONTEST POINTSLOCATIONGALVANIC ANODE TYPESTRUCTURE TO ELECTROLYTE POTENTIAL (mV)POLARIZATION CURRENT (Amp)REMARKSVolt MeterBrand: ______________

S/N: ______________

Calib. Date:___________AmmeterBrand: ______________

S/N: ______________

Calib. Date:___________

Page &P of &N

Multipage SATR Pages 2,3,4.SAUDI ARAMCO ID/PID - 18-MAY-05 - REV 0 (Standards Cutoff - JUNE 2008)REV 330-Jun-08SAUDI ARAMCO TEST REPORTSATR NUMBERDATE APPROVEDQR NUMBERGalvanic CP TestingSATR-X-3101CP-PROJECT TITLEWBS / BI / JO NUMBERCONTRACTOR / SUBCONTRACTORITEM No.TEST RESULTS ACCEPTANCE CRITERIAREFERENCEPASSFAILN/ARE-TEST DATED. CONCLUSIONSITEM No.TEST RESULTS ACCEPTANCE CRITERIAREFERENCEPASSFAILN/ARE-TEST DATED1SafetyCathodic protection personnel are responsible for obtaining appropriate work permits and associated gas test results from the operations foreman in all classified areas before starting any job.SAES-P-332Sec. 3D2Test results are acceptable and in accordance with Saudi Aramco Engineering Standards and contractual requirements.N/AREMARKS:REFERENCE DOCUMENTS:1. SAEP-332 Cathodic Protection Commissioning, 31 May 20052. SAES-X-400 Cathodic Protection of Buried Pipelines, 22 October 20073. SAES-X-500 Cathodic Protection of Vessel and Tank Internals, 31 March 2008Contractor / Third-PartySaudi AramcoTechnician Performing Test*PMT RepresentativeName, Title, Department,Company, Initials and Date:Test Performed Successfully and Results are Acceptable:Name, Initials and Date:T&I WitnessedQC Record ReviewedWork VerifiedQC InspectorPID RepresentativeName, Initials and Date:Witnessed TestWork / Rework May ProceedName, Initials and Date:T&I WitnessedQC Record ReviewedWork VerifiedQC SupervisorProponent and OthersName, Sign and Date:Quality Record Approved:Name, Organization,Initials and Date:T&I WitnessedQC Record ReviewedWork Verified*Person Responsible for Implementation of Test and Analysis of ResultsY = YES N = NO F = FAILED

Page &P of &N