Sasha Milov HBD upgarde Feb 8, 2005 1 Assembly and testing facility. Sasha Milov Feb 8, 2005 Glove...

4
Sasha Milov HBD upgarde Feb 8, 2005 1 Assembly and testing Assembly and testing facility. facility. Sasha Milov Feb 8, 2005 Glove Box Other needs Testing

Transcript of Sasha Milov HBD upgarde Feb 8, 2005 1 Assembly and testing facility. Sasha Milov Feb 8, 2005 Glove...

Page 1: Sasha Milov HBD upgarde Feb 8, 2005 1 Assembly and testing facility. Sasha Milov Feb 8, 2005 Glove Box Other needs Testing.

Sasha Milov HBD upgarde Feb 8, 2005 1

Assembly and testing facility.Assembly and testing facility.

Sasha Milov

Feb 8, 2005

Glove Box Other needs Testing

Page 2: Sasha Milov HBD upgarde Feb 8, 2005 1 Assembly and testing facility. Sasha Milov Feb 8, 2005 Glove Box Other needs Testing.

Sasha Milov HBD upgarde Feb 8, 2005 2

Glove Box.Glove Box. Glove box parameters considered: 2.5m long 1.3m wide, 1.5m tall Row with three pair of gloves on each side May need an upper row of gloves too Humidity control system inside the box ~250 l/h flushing gas system Full size door on one side Pumpable antechamber on the other side Electrical and gas communications in/out Detector positioning system inside the box Shelves, boxes etc

Quotes: There are preliminary quotes form several companies (Mbraun, Innovative Technology, CoyLab etc…) ranging about $40k Rich Hutter is investigating “do-it-yourself” quote. Craig mentioned that JLab GB was cheaper. To be looked up.

Timing: Best case scenario: We get OK for MRI money in April, SUNYSB can possibly borrow against that money in May, plus the delivery takes 6-8 weeks July… quite late

Page 3: Sasha Milov HBD upgarde Feb 8, 2005 1 Assembly and testing facility. Sasha Milov Feb 8, 2005 Glove Box Other needs Testing.

Sasha Milov HBD upgarde Feb 8, 2005 3

Other needs.Other needs. Evaporator:

Works, requires a lot of nursing to operate properly. Needs minor adjustments to make a final size of GEM. Has $20k money reserved in MRI for upgrade. Evaporator-to-box transfer system.

Gas system: Needs quite simple gas system (cylinderreducerexhaust) for N2/Ar and CF4. Something we can put together in the tent at SUNYSB.

Other: Do we need a U-sonic washer for GEMs? Now or later? Tools, soldering station, consumables etc. Need to make a list and order ahead of time, but quite clear most items are at hand.

Page 4: Sasha Milov HBD upgarde Feb 8, 2005 1 Assembly and testing facility. Sasha Milov Feb 8, 2005 Glove Box Other needs Testing.

Sasha Milov HBD upgarde Feb 8, 2005 4

TestingTesting

Gas testing: Crucial for prototype: How pure gas we can achieve and how fast? Can start measurement as soon as the detector is closed. The final system with monochromator would certainly do the job. The same problem with money as with the GB ($80k). Might need to find something cheaper and less fancy.

Performance test: Iron source signal monitoring. Cosmic ray (below threshold) test No photocathode QE test is foreseen. Shall we do it?

Any Beam tests?