SARGENT Pex Tools Catalog

Soft-Touch ™ Professional Plumbing Tools

PEX Tools for Copper Rings

Go/No-Go Gage (#9240G) included with all SARGENT® Crimp Tools for copper rings. All SARGENT® tools include complete tool use and care instructions.

* First dimension is the cavity closest to the pivot

SARGENT® 9300 Series PEX Soft-Touch ULTRA-LITE Composite Handle Crimp Tools

SARGENT® Soft-Touch ULTRA-LITE PEX Crimp Tools feature our latest innovation, strong, lightweight, composite handles with soft grips. ULTRA-LITE handles are almost 20% lighter than most PEX crimp tools to help you stay on the job longer with less fatigue without sacrificing tool strength. Soft comfort grips complete the ergonomic design, better holding, less chance of slippage and more secure crimping power.

Lightweight Composite Handles and Ergonomic Soft Grips

• Reduce tool weight 20%; less to carry on the job site

• Soft comfort grips increase crimping power and lessen the chance of slippage

• Composite material handles combine the strength of glass-filled polycarbonate with the chemical resistance of polyester; these tools hold up to plumbers’ punishment

Dual Cavity Tool

• Crimps 1/2" and 3/4" PEX fittings withone tool

• Reduces the number of tools you need

• Increases productivity

• Reduces Cost

Circular Crimps

• Conform to ASTM standard F-1807

• Seal without ridges, flash or tooth marks on the rings; no leak paths

• Ensure complete sealing around the fitting

Description/Tool Length 14"3/8" Soft-Touch ULTRA-LITE Crimp Tool 9301 STC 1/2" Soft-Touch ULTRA-LITE Crimp Tool 9302 STC 5/8" Soft-Touch ULTRA-LITE Crimp Tool 9307 STC 3/4" Soft-Touch ULTRA-LITE Crimp Tool 9303 STC1" Soft-Touch ULTRA-LITE Crimp Tool 9304 STC Dual Cavity Model: 14"3/4" and 1/2" Soft-Touch ULTRA-LITE Crimp Tool* 9306 STC

1 Rostra Technical & Customer Info: 203-488-8665 www.rostratool.com



SARGENT® 9357 SA Size-All ULTRA-LITE Composite Handle Crimp Tool Kit

for 3/8", 1/2", 3/4" and 1" PEX Copper RingsSARGENT® Size-All ULTRA-LITE Tool Kit features a specially designed dual cavity Soft-Touch crimp tool. This unique tool has built-in jaws for 1/2" and 1" PEX copper rings. The 1" cavity is designed to accept interchangeable dies for 3/8" and 3/4" PEX copper rings.

One tool crimps the four most popular PEX copper ring sizes and it includes all the unique features of SARGENT®

Soft-Touch ULTRA-LITE crimpers to make the PEX job quicker and easier:

• Crimps conform to ASTM standard F-1807

• Ergonomic soft comfort grips

• Strong and lighter composite handles

• High mechanical advantage

• 14" tool length

• Quick Release Die Sets

Description NumberSize-All ULTRA-LITE Kit 9357 SA

9357 SA Kit includes:

1" & 1/2" Combo Crimper3/8" Interchangeable Die3/4" Interchangeable Die

Go/No-Go Gage

2www.rostratool.com Rostra Technical & Customer Info: 203-488-8665


Go/No-Go Gage (#9240G) included with all SARGENT® Crimp Tools for copper rings.

All SARGENT® tools include complete tool use and care instructions.

SARGENT® 9358 STCK Soft-Touch ULTRA-LITE Crimp Tool Kit

with Interchangeable Dies for 3/8", 1/2", 3/4" & 1"

SARGENT® 9359 KES Soft-Touch Tool Kit

with Interchangeable Dies for Crimping and Removing 3/8", 1/2", 5/8", 3/4" & 1" Copper PEX Rings


Kit comes complete with specially designed 1" Crimp Tool (9204 STM) modified to accept 3/8", 1/2" and 3/4" interchangeable dies (included). It also includes 7407 ES Easy Shear ring and pipe removal tool and 9240 Go/No-Go Gage. Uniquely engineered with hold-down buttons for speedy die changes. No need for wrenches.

• One kit for crimping and removing 3/8", 1/2", 5/8", 3/4" and 1" copper rings

• Crimps copper PEX rings to ASTM F-1807

• Dies slip into 1" cavity and are secured with quick-change fasteners. Changes dies without tools.

• Tool length is 16".

Kit comes complete with specially designed 1" Soft-Touch ULTRA-LITE Crimp Tool (9304 STC) modified to accept 3/8", 1/2" and 3/4" interchangeable dies (included). It also includes 9305 EC Easy Cut Tool, 9240 Go/No-Go Gage , 5/32" hex key and a custom-designed molded case.

• One kit for most PEX copper ring applications


• Dies slip into 1" cavity, secured with hex key (included)

Description NumberULTRA-LITE Crimp Tool Kit 9358 STCK

Description NumberCrimp Tool with Interchangeable Dies 9359 KES



Circular Crimps

• Conform to ASTM standard F-1807

• Seal without ridges, flash or tooth marks on rings; no leak paths

• Ensure complete sealing aroundthe fitting

SARGENT® represents the industry standard for reliable crimping and durability. SARGENT® Soft-Touch Crimp Tools are the choice of plumbing contractors. Decades of reliable use prove top quality design and performance. Strict manufacturing standards guarantee precise crimps and robust construction. These crimp tools are engineered to “stand the test of time”, crimp to the proper specifications and make the job easier. These heavy duty tools provide tens of thousands of crimps with minimal care.


* First dimension is the cavity closest to the pivot

Description/Tool Length 12" 16" 19"3/8" Soft-Touch Crimp Tool 9201 STS 9201 STM 1/2" Soft-Touch Crimp Tool 9202 STS 9202 STM 3/4" Soft-Touch Crimp Tool 9203 STS 9203 STM 1" Soft-Touch Crimp Tool 9204 STM 9204 STL1 1/4" Soft-Touch Crimp Tool 9208 STL Dual Cavity Models: 16"1/2" and 3/4" Soft-Touch Crimp Tool* 9205 STM 3/4" and 1/2" Soft-Touch Crimp Tool* 9206 STM

SARGENT® 9200 Series PEX Soft-Touch

Steel Handle Crimp Tools

Robust, Steel Handles and Comfort GripsAvailable in short, medium and long handle lengths and single or dual cavities:

• STS Short handles for tight quarters(12" tool length)

• STM Medium handles for extra leverage(16" tool length)

• STL Long for large diameter pipe(19" tool length)



Compact, offset head design features a high mechanical advantage in limited access areas. Unique pivoting action requires only 6" maximum between outside handle grips. Ideal for crimping between studs, joists and tracks.

• Light weight frame and comfort grips make crimping easier


• One handed crimping gets the jobdone quicker

SARGENT® 7300 ES Series Easy Seal Compact Crimp Tools

SARGENT® 9230 ES Series Soft-Touch Ratchet Crimp Tools



Description 12"1/2" Easy Seal Crimp Tool 7302 ES 3/4" Easy Seal Crimp Tool 7303 ES

Description 12''3/8" Soft-Touch Ratchet Crimp Tool 9231 STR 1/2'' Soft-Touch Ratchet Crimp Tool 9232 STR

Specially designed for maximum mechanical advantage in tight areas. Ratchet assures complete crimp.

• Crimps copper PEX rings to ASTM F-1807• Provides round crimps without unsightly tool marks or distortion • Excellent performance in tight quarters or on manifold connections



SARGENT® 9263 MP Series Multi-Pex Compact Crimp Tool

For 3/8", 1/2" and 3/4" Copper PEX Rings

SARGENT® 9260 SDT Screw Drive Crimp Tool

For 3/8", 1/2", 3/4" and 1" Copper PEX Rings



Compact and tough. SARGENT® 9260SDT Screw Drive Crimp Tool uses your 1/2" wrench or socket to crimp to ASTM F-1807 specifications.

Simple to use:

• Match up selected pipe size cavities• Place fitting, ring and tube assembly in tool • Turn down two bolts until jaws meet• Check with Go/No Go Gage (included)

SARGENT® Multi-Pex is economical and will crimp 3/8", 1/2" and 3/4" copper PEX rings. Uses your 10" locking pliers. Crimps conform to ASTM Standard #F-1807, a must for leak-free connections

The Multi-Pex patent pending design provides superior mechanical advantage so the job will get done easier and quicker.

• Full circle crimps prevent leak paths and unsightly tool marks.

• No adjustments necessary. Works first time, every time.

• Riveted construction stays in one piece, for good.

Description NumberMulti-Pex Compact Crimp Tool 9263 MP

Description NumberScrew Drive Crimp Tool 9260 SDT


Description Number3/8'' RIGHT-ON Soft-Touch Crimp Tool 9201 RO STS 1/2'' RIGHT-ON Soft-Touch Crimp Tool 9202 RO STS 3/4’’ RIGHT-ON Soft-Touch Crimp Tool 9203 RO STS

SARGENT® 7407 ES Easy Shear

Ring and Pipe Removal Tool

SARGENT® 9200 RO RIGHT-ON Soft-Touch Crimp Tools

For 3/8", 1/2" and 3/4" Copper PEX Rings



Patent pending right angle head provides a new level of access in extreme locations. Ideal for repairs under sinks or squeezing around finished work.


• Crimping head is tilted 90˚ to the handle

• Toggle action assures all rings are crimped to spec

Removes incorrectly crimped copper rings without damaging fittings. Pre set stop-gap allows easy PEX ring andPEX pipe removal.

• Works on: 1/2", 5/8", 3/4", 1" and 1-1/4" PEX pipe

• Specially designed for maximum leverage and superior mechanical advantage

• Heat treated blade for plenty of dependable cuts

Description NumberEasy Shear Ring & Pipe Removal Tool 7407 ES



SARGENT® 9253 SCPK Tool Kit for PEX Stainless Steel Clamps

With Pincer Tool, Clamp Remover and Tool Calibration Gage

SARGENT® 9405 EC Easy Cut Tool

Cuts 3/8", 1/2" and 3/4" PEX Pipe



This handy kit includes 9253 SCP, three handled pincer tool, 9256 PRT clamp removal tool and pincer tool calibration gage (9250 G) in a molded case. Case includes cavities for storing clamps (clamps not included).

• Connections conform to ASTM F-2098 standards

• Three handled, ratcheted pincer toolcan be used with one hand; it’s quick and easy

• Case keeps tools & clamps organized,clean and easily transported around the job site. (Clamps not included with kit)

Most unique, effective and safest PEX cutter in the trade. Auto-pressure design assures smooth cuts every time. Compact design fits easily into pockets and tool belts.

Quick and Simple to use:

• Expand Easy Cut around PEX pipe (blade automaticallylocks itself in place)

• Place thumb in thumb ring and spin away from you

• Easy Cut cuts the pipe square and true

Description NumberEasy Cut Tool 9405 EC

PEX Tools for Stainless Steel Clamps


Go/No-Go Gage (#9250G) included for tool calibration. All SARGENT® tools include complete tool use and care instructions.

• One tool for all size clamps: 3/8", 1/2", 3/4" and 1"

• Save fittings with this simple-to-use tool

• The tool cavity slips over the pinched clamp saddle

• Twisting the tool shears the saddle and the clamp can be easily removed

The industry standard for function, speed and ease of use. SARGENT® PEX-Clamp pincer tools have produced hun-dreds of millions of watertight connections. One tool is effective for all size stainless steel clamps (3/8'', 1/2'', 3/4'', and 1''). Tool calibration gage (9250 G) included for consistent, watertight connections.

• Connections conform to ASTM F-2098 standards

• Ratchet mechanism or ease of use and consistent sealing

• Compact design with strong, light weight frame

Description NumberPEX-Clamp Standard Model 9252 SCP PEX-Clamp Three Handled Model* 9253 SCP

SARGENT® 9200 Clamp Removal Tool for All Sizes

of PEX Stainless Steel Clamps


• Unique third handle for one-handed operation

• Best tool available in limited access spaces

• Patent pending

Description NumberSocket Only 9255 PRT Includes 7 1/2" swivel handle 9256 PRT


PEX Tools for Stainless Steel Sleeves

SARGENT® PEX-Clamp Pincer Style Ratchet Tools

for PEX Stainless Steel Sleeves

Forms two unique circular grooves necessary for leak- free connections

SARGENT® 9220 SS Series Crimp Toolsfor PEX Stainless Steel Sleeves

SARGENT® 7705 EL Easy Lock Compression Toolfor 1/2" and 3/4" PEX Pipe


Compresses and assembles Rehau and Uponor style PEX couplers to industry standards. Extended head makes this tool easy to use close to floors, walls and with short stub-ins. Single stroke operation minimizes user fatigue.

• Superior mechanical advantage makes the job easier

• Can be recalibrated in the field to ensure leak-freeconnections

• Heavy duty construction for years of dependable use

The Stainless Sleeve Crimp Tool provides a finished appearance on the transition from the end of the pipe to the insert fit-ting. The same toggle action handle employed on our Soft Touch design is utilized on these crimp tools. High mechanical advantage is essential when forming the circular depressions in the stainless sleeve to create a watertight seal.

• Excellent mechanical advantagemakes crimping easier and quicker

• Available in 12" and 19" lengths

Description/Tool Length 12'' 19'' 13/8" Crimper for Stainless Sleeves 9221 SSS 1/2" Crimper for Stainless Sleeves 9222 SSS 3/4" Crimper for Stainless Sleeves 9223 SSS1" Crimper for Stainless Sleeves 9224 SSL 1-1/4" Crimper for Stainless Sleeves 9228 SSL

Tools for Compression Style PEX Fittings

Description NumberEasy Lock Compression Tool 7705 EL



A specially designed Go/No-Go Gage (#9288 TAG) is included with this tool. All SARGENT® tools include complete tool use and care instructions.

SARGENT® 9280 TA Series Tight As™ Crimp Tools

Tight-As™ Crimpers provide smooth, circular crimps without unsightly tool marks.

An industry first, Tight-As™ Crimpers are the first in the trade to crimp stainless steel sleeves to exacting standards. The secret is the combination of high mechanical advantage and the ultra-smooth crimp dies that create a depression-free crimp. Stainless steel sleeves are now “gaugeable” and as leak-free as copper crimp rings used for decades.

When you want to ensure that your stainless steel sleeve crimps are as

“Tight As” copper crimps, insist on SARGENT® Tight-As™ Crimpers.

Description/Tool Length 16" 19" 11/2" Crimper for Stainless Sleeves 9282 TAM 3/4" Crimper for Stainless Sleeves 9283 TAM 1" Crimper for Stainless Sleeves 9284 TAL

The critical measurement for these crimps is the interior diameter (ID) so a specially designed Go/No-Go Gage (#9288 TAG) must be used to verify crimp integrity.


Rostra Tool Company 30 E. Industrial Rd., Branford, CT 06405 • Phone: 203-488-8665 • Fax: 203-488-6497

[email protected] • www.rostratool.com SQT PEX 11-11

SARGENT Pex Tools Catalog

Documents

Transcript of SARGENT Pex Tools Catalog