SANLOZ GROUP INC. - KOVERBOND · 2018-11-17 · SANLOZ GROUP INC. (KOVERBOND SPECIFICATION SHEETS)...

SANLOZ GROUP INC.

(KOVERBOND SPECIFICATION SHEETS)

1209 S. 10TH Street STE A 591

McAllen Texas 78501

+52 (81) 84 78 02 90

+52 (81) 18 03 12 57

www.koverbond.com Plastic and Fiberglass Repair Systems

PLASTIC AND FIBERGLASS REPAIR SYSTEMS

Fix everything you can imagine!

SANLOZ GROUP INC.



McAllen Texas 78501

+52 (81) 84 78 02 90

+52 (81) 18 03 12 57


PLASTIX Quick Plastic Repair Kit

PLASTIX is an ultra-fast adhesive kit for quick repairs. It achieves an

instantaneous chemical bond on almost all plastics, metals, as well as rubber,

wood and even glass. It works as a spot weld adhesive or as a structural

adhesive to bond fittings, fasteners, headlight brackets and other clips. It can

be sanded, filed, drilled, tapped and painted. It is composed of 3 elements:

(1) an instantaneous plasticizer and activator (liquid dropper bottle), (2) “IRF”

an Instantaneous Reaction Fiber and (3) a self-adhesive reinforcing mesh.

The combination of elements achieves a quick, simple and wide solution to

many of the problems faced daily in all auto body shop.

PLASTIX can:

+ Instantly glue together (chemical weld) the edges of a bumper tear

or crack leveling the surface to proceed to rebuild the part with

PLASTI-HAIR and then K-BOND.

+ Repair quickly and strongly (includes powdered fiber and reinforcing

mesh) plastic rivet problems, auto clips, plastic fasteners and more by

chemically welding parts back in their place in a matter of minutes.

+ Replace a completely torn or lost plastic fastener or missing spring

clip from wheel arch moldings, mud guards, and more moldings using

the included flat socket cap screw or nut.

+ Quickly rebuild a plastic bumper tab achieving great quality, without

any specialized tools or expensive materials.

+ Repair a broken head light bracket, a broken dashboard or even a

steering wheel after a deployed airbag.

+ Fill missing sections in rebuild in minutes.

PLASTIX includes everything you need from sand paper, to instant

activator, instantaneous reaction reinforcing fiber, reinforcing auto-

adhesive mesh, screw to replace fasteners a spoon and even a razor

blade.

The PLASTIX Quick Plastic Repair Kit offers: + Excellent bond between plastics of the same kind and different ones.

+ Excellent bond between metals (iron, aluminum, brass) and plastics.

+ Cures and sets dry in seconds

+ Excellent adhesion to different surfaces

SANLOZ GROUP INC.



McAllen Texas 78501

+52 (81) 84 78 02 90

+52 (81) 18 03 12 57


Advantages: + It can be applied on plastics, fiberglass, sheet metal and aluminum + Applies quickly and easily + It can be sanded and painted + Easy to paint gray primer tone finish

Usage: *ATTENTION: The instant activator and “IRF” generate a

irritating chemical reaction. Apply in an open area. Keep at

an arms distance, for some seconds once the “IRF” has been

activated with the instant activator.

*For greater success watch our video tutorials in YouTube: KOVERBOND.

Broken or torn Bumper repair. Spot weld with PLASTIX Repair with PLASTI-HAIR 1. Align both sides of the crack to assure their correct alignment. 2. Clean the area to be repaired 3. Define the bonding line or work area 4. This work area needs to be sanded along the whole length

including 3 to 5 cm on each side of the tear or crack (the extended sanding is anticipating that PLASTI-HAIR will be applied along the crack). This sanding will allow better adhesion. Blow off dust.

5. Bring the broken parts together aligning them in their place. 6. Using the small spoon included, take some “IRF” (instantaneous

reaction reinforcing fiber) and place it over a spot that will be bonded along the tear or crack. Press it into the repair area.

7. Apply the instantaneous plasticizer activator (liquid dropper bottle) over the “IRF” and let it set for 10 to 20 seconds.

8. Repeat this step on several spots along the crack until the part is secured and there is no movement along the sides of the crack.

9. Then proceed to repair the whole crack with PLASTI-HAIR.

How to repair fasteners, tabs and brackets? How to fix a screw to replace a fastener? 1. Clean the area to be repaired 2. Mark or take a good visual note of the place form where the tab

was torn to replace it in its exact place. 3. Sand the surface form where the tab was torn, carefully to not

disappear the mark of the tab´s place. Sand the contour of the tab.

4. Place the tab (or screw) in its place.

https://www.youtube.com/channel/UCtePcK8kaR5vp8ZhEz0AgSA

SANLOZ GROUP INC.



McAllen Texas 78501

+52 (81) 84 78 02 90

+52 (81) 18 03 12 57


5. Fix temporarily in place the tab, fastener or screw using one drop of the liquid activator between the repair part and the base of the tab (or the head of the screw).

6. Then place some of the “IRF” (instantaneous reaction reinforcing fiber) around the base of the fastener, tab or screw.

7. Press it to level out and give shape to the plastic that is about to be formed.

8. Apply some drops of the instantaneous plasticizer activator (liquid dropper bottle) over the “IRF” and let it react.

9. Once it has reacted, sand and de-dusting. 10. Measure the width and length of this application of PLASTIX.

Add 0.5 cm to the width and length measurements and cut a patch of the self-adhesive reinforcing mesh to cover this previous application over the edges. If necessary, cut the reinforcing mesh in an irregular shape so it can complete adhere to the surface and previous reacted product.

11. Remove the reinforcing mesh from the adhesive paper and place the adhesive part down.

12. Place the reinforcing mesh over the previous applied and reacted product. The objective is to form a sandwich of layers with PLASTIX and the self-adhesive reinforcing mesh.

13. Place another layer of “IRF” around the base of the fitting over the reinforcing mesh. Apply some drops of the instantaneous plasticizer activator (liquid dropper bottle) over the “IRF” and let it set.

¡Fix everything you can imagine!

RECOMMENDATIONS: Use proper personal protection equipment: safety glasses, gloves, apron and respirators all are recommended.

WARNINGS:

WARNING! Hardener hazards: Oxidizer. Causes eye irritation. May cause allergic skin reaction. May irritate the skin, nose and

throat. WARNING! Filler Hazards: Flammable liquid and vapor. Vapor harmful. May irritate the eyes, skin, nose and throat and

causes dizziness, headache or nausea. Intentional misuse by deliberately concentrating and inhaling the contents may be

harmful of fatal. Contains a chemical(s) wich can cause cancer. PRECAUTIONS: Vapor may cause flash fire. Keep away from

heat, sparks flame and sources of static discharge Avoid eye contact Do not get on skin or clothing. Avoid breathing dust or

vapors. Use only with adequate ventilation. Do not swallow. Wash thoroughly after handling. Close container after each use.

FIRST AID INFORMATION: Eye contact: Immediately flush eyes with large amounts of water for at least 15 minutes. Get

immediate medical attention. Skin contact: Remove contaminated clothing and shoes. Immediately flush skin with large

amounts of water. Get medical attention. Wash contaminated clothing and clean shoes before reuse. Inalation: Remove person

to fresh air. If sings/symptoms develop, get medical attention. If Swallowed: Do not induce vomiting. Get medical attention.

KEEP OUT OF REACH OF CHILDREN.

SANLOZ GROUP INC.



McAllen Texas 78501

+52 (81) 84 78 02 90

+52 (81) 18 03 12 57


PLASTI-HAIR Repair body filler for bumpers and plastics

Specialized body filler for repair and reconstruction of plastic autoparts

like; bumpers, grilles, spoilers, skirts and dashboards, integrating

surface modifier, plasticizers, polimeric elements and micro and short

strand fiberglass. The polimeric elements promote superior adhesion

over surfaces like PP, ABS and other plastics while offering a surface

that can be sanded.

PLASTI-HAIR can repaircracks, tears, holes in bumpers, wheel arch

moldings, spoilers, dashboards, interior and exterior plastics.

PLASTI-HAIR can reconstruct missing sections orcustom build new

sections into a bumper (custom air intake,custom headlamp housing,

etc).It can also be used to fill and level surfaces of a dented bumper

where a plasticized and reinforced filler with crack resistance and

excellent adhesion is needed.

PLASTI-HAIR is a polyester based body filler which offers: + Excellent adhesion to bumpers, autoparts plastics and SMC. + Excellent impact resistance + Excellent reinforcement based on careful selection of engineering fibers + Easy sanding and does not retreat as it is sanded + Fast setting and curing times (20 to 30 min.) *In standard conditions 74°F and 3% Catalyst + Excellent machinability (it can be cut, drilled, taped) + High tensile strength and compression strength + Reinforced plastic properties + Plasticity that resist natural vibrations

Advantages: + Works on bumpers, auto plastics, steel sheets, fiberglass and aluminum + Good fluidity and no drip + Fast application + Easy spreading + No previous preparation with adhesion promoters needed.

SANLOZ GROUP INC.



McAllen Texas 78501

+52 (81) 84 78 02 90

+52 (81) 18 03 12 57


Usage: *For greater success watch our video tutorials in YouTube: KOVERBOND.

To begin using PLASTI-HAIR, it is recommended to prepare a small

amount of PLASTI-HAIR with its hardener to be able to first measure

curing times relative to hardener percentage and ambient

temperature.

Bumper Tear Repair

1. Using water and soap clean the area to be repaired front and

back. Let dry.

2. PLASTI-HAIR will be applied on both sides starting on the back.

3. Sand with 80 to 120 grit sandpaper to uncover the base plastic to

secure adhesion. This work area needs to be sanded along the

whole length including 1.5 to 2in. on each side of the tear or

crack. This sanding will allow better adhesion. Blow off dust.

4. Apply masking tape on the front side of the repair.

5. Knead cream hardener tube thoroughly before using.

6. Use a clean non-porous surface to mix PLASTI-HAIR and cream

hardener in a mixing ratio of 3:100 (PLASTI-HAIR: Hardener) by

weight (3:100 = 3%, use 4% when weather is cold). Mix until the

color of the hardener is no longer visible.

7. Apply mixed PLASTI-HAIR into the repair area using firm

pressure to ensure maximum adhesion and to release possible

trapped air. Spread from the repair area outwards or sideways 1.5

to 2in. to each side of the damage area making a gradual taper

leaving a bulk reinforcement behind the main repair area. This

bulk will form a reinforcement nerve once it sets.

8. On the front side, sand the surface making a “V” groove along the

repair area starting on the sides of the crack and deepen into the

center of the crack. The idea is to form a groove that opens to

about 1 to 1.5 inches wide to fit the product. Do this all the way

from the edge of the bumper to where the tear stops. Leave no

square edges in the repair area. Blow off and dry wipe.

9. Estimate the quantity of PLASTI-HAIR you will need to fill the

groove. Proceed to mix and apply PLASTI-HAIR following the

same mixing procedure as above. The idea is to be able to sand

and level the surface and still retain product in the groove.


SANLOZ GROUP INC.



McAllen Texas 78501

+52 (81) 84 78 02 90

+52 (81) 18 03 12 57


Cosmetic Finishing:

1. Sand PLASTI-HAIR with 80 to 120 grit sandpaper.

2. Apply K-BOND (Body filler for bumpers and plastics) as a finishing

over the front of the repair area and over the PLASTI-HAIR cured

repair.


RECOMMENDATIONS:

Use proper personal protection equipment: safety glasses, gloves, apron and respirators all are recommended.

WARNINGS:












SANLOZ GROUP INC.



McAllen Texas 78501

+52 (81) 84 78 02 90

+52 (81) 18 03 12 57


K – BOND Body filler for bumpers and plastics

Easy to sand body filler with plasticizers and adhesion promoters that

improve flexibility and generate a high adhesion on plastic surface like

bumpers, wheel arch moldings, dashboards, spoilers, grilles and other

auto plastics. It can be applied on almost all plastics, flexible and rigid,

interior and exterior, including SMC and Fiberglass.

It can repair scratches, small dents, scuffs, dings and gouges. K-BOND

is recommended as a finishing filler to be applied on plastics as well as

on previously sanded PLASTI-HAIR, POWER FIBER or PLASTIX to

eliminate pinholes, sand scratches and other imperfections. K-BOND

delivers a semi-rigid, easy to sand and feather edge surface.

K – BOND is a polyester based body filler which offers: + Excellent sanding and feather edging + Resistance to cracking. K-BOND is semi-rigid. + Compatibility with other plastics + Medium gray finish easy for priming and prevents bleeding. + Excellent adhesion to plastic surface (no need of surface modifier) + Fast setting and curing times (20 to 30 min.) *In standard conditions 74°F and 3% Catalyst + Plasticity that resist natural vibrations

Advantages

+ Can be applied on plastics, fiberglass, metal, aluminum and other

surfaces.

+ High resistance to cracking + Easy and fast application + Spreads smoothly + Easy to paint gray primer tone finish


To begin using K-BOND, it is recommended to prepare a small amount of K-BOND with its hardener to be able to first measure curing times relative to hardener percentage and ambient temperature. 1. Dry wipe or use compressed air to clean the area to be worked. 2. Sand with 80 to 120 grit sandpaper to remove surrounding

damaged paint and uncover the base plastic to increase adhesion. Blow off and dry wipe.

K-BOND body filler applied to bumper then twisted. It resists

cracking without problems.


SANLOZ GROUP INC.



McAllen Texas 78501

+52 (81) 84 78 02 90

+52 (81) 18 03 12 57


3. Knead cream hardener tube thoroughly before using. Use a clean

non-porous surface to mix K-BOND and cream hardener in a mixing ratio of 3:100 (K-BOND: Hardener) by weight (3:100 = 3%, use 4% when weather is cold). Mix until the color of the hardener is no longer visible.

4. Apply mixed K-BOND into the repair area in layers as needed; the first layers should be applied using firm pressure to ensure maximum adhesion, pore filling and to release possible trapped air.


RECOMMENDATIONS:


WARNINGS:












SANLOZ GROUP INC.



McAllen Texas 78501

+52 (81) 84 78 02 90

+52 (81) 18 03 12 57


K-FG Structural adhesive for Fiberglass and SMC

Strong, adhesive designed to bond fiberglass parts that are built from sections like truck hoods. It works as adhesive also with reinforced plastics like FRP and SMC (sheet molding compound) with FRP/SMC and back up strips, fairings, body panels, spoilers, fender liners and more. Works on trucks, boats, motorcycles, golf carts and the like. K-FG is easy to use and apply, simply mix with its hardener and prepare as a body filler, with a spreader and mixing board. K-FG is a polyester based slow curing structural adhesive which offers: + Excellent adhesion to Fiberglass + Excellent bonding to SMC or Fiberglass surfaces + Excellent impact resistance + Easy sanding + Curing time of 2 hours that allows detailed positioning of parts

*In standard conditions 74°F and 3% Catalyst + Reinforced plastic properties + Plasticity to resist natural vibrations

Advantages

+ It can be applied on regular fiberglass parts and surfaces as well as more engineered materials like SMC, RTM and Metton ® + This adhesive system does not require expensive application guns like twin cartridge dosifier + No need for disposable mixing nozzles + It uses cream hardener as regular body filler + Fast application + Spreads smoothly + Black tone that gives standard adhesive´s appearance


To begin using K-FG, it is recommended to prepare a small amount

of K-FG with its hardener to be able to first measure curing times

relative to hardener percentage and ambient temperature

1. Clean the area or bonding line and the part to be adhered. To

increase adhesion, sand with 60 to 80 grit sand paper to uncover

the base fiber of the area to bond and the part to be bonded or

the parts that will make contact. Blow off dust.


SANLOZ GROUP INC.



McAllen Texas 78501

+52 (81) 84 78 02 90

+52 (81) 18 03 12 57


2. We suggest working in only one physical area and not moving

the parts during the curing time. Look for a free space were to

leave the part for some hours.

3. Put parts together simulating the final assembly.

4. Verify the assembly between the parts and simulate it by fitting

together the parts with clamps or several C-Press before the

application of K-FG.

5. Confirm the pressure spots for the clamping tools and adjust the

tools for a quick assembly once the K-FG is applied.


7. Use a clean non-porous surface to mix K-FG and cream hardener

in a mixing ratio of 100:3(K-FG: Hardener) by weight (100:3 = 3%,

use 4% when weather is cold).

8. Mix until the color of the hardener is no longer visible.

9. Apply a uniform bead line of K-FG along the bonding line parts

to bond.

10. Place the parts in their place to adhere and bond as soon as

possible.

11. Steadily fix in place the parts with the previously adjusted tools.

12. Let them still during the curing process.


RECOMMENDATIONS:


WARNINGS:












SANLOZ GROUP INC.



McAllen Texas 78501

+52 (81) 84 78 02 90

+52 (81) 18 03 12 57


POWER FIBER Repair body filler for Fiberglass and SMC Body filler for repair and reconstruction of Fiberglass, SMC (sheet moulding compunds) parts, metal sheet and wood, integrating adhesion promoters, plasticizers, polimeric elements, short strand fiberglass and micro fiberglass. Superior adhesion and strength make it ideal for repairing tractor truck hoods,fenders, roof fairings, wind deflectors,ridig plastics and body panels. With POWER FIBER you can repair fiberglass without the need of chopped strand mat, scissors, brush, dropper, rollers and other easy to misplace tools as well as solvents and buckets to clean these tools. Simply mix POWER FIBER with its cream hardener and prepare as a body filler, with a spreader and mixing board. The balance of resins, strands, micro fibers, plasticizers and polymers eliminate the need of fiberglass mat as reinforcement. The combination of these elements generate a reinforcement membrane capable of reconstructing and repairing damages like holes, cracks, tears, rusted perforated surfaces as well as filling unleveled surfaces. POWER FIBER is a polyester based body filler which offers: + Excellent reinforcement based on careful selection of engineering fibers + Excellent adhesion to Fiberglass, SMC, RTM, Metton®, metal sheet, rusted perforates sheets and more. + Excellent impact resistance + Excellent sanding and feather edging + Fast setting and curing times (20 to 30 min.) *In standard conditions 74°F and 3% Catalyst + Excellent machinability (it can be cut, drilled, taped) + High tensile strength and compression strength + Reinforced plastic properties + Plasticity to resist natural vibrations

Advantages: + It can be used on ordinary fiberglass, SMC(sheet moulding compunds), RTM, on metal sheet and on rusted perforates metal sheet + No need to use reinforcement fiberglass mat + Good fluidity and no drip + Uses cream hardener as regular body filler + Easy application and spreading + Works real well in boats and jet skys + Easy to paint green primer tone finish + No previous preparation with adhesion promoter needed.

SANLOZ GROUP INC.



McAllen Texas 78501

+52 (81) 84 78 02 90

+52 (81) 18 03 12 57



To begin using POWER-FIBER, it is recommended to prepare a small

amount of POWER-FIBER with its hardener to be able to first

measure curing times relative to hardener percentage and ambient

temperature.

Fiber Glass Repair

1. Using water and soap clean the area to be repaired front and

back. Let dry.

2. POWER-FIBER will be applied on both sides starting on the back.

3. Sand with 80 to 120 grit sandpaper to uncover the base fiberglass

to secure adhesion. This work area needs to be sanded along the

whole length including 1.5 to 2in. on each side of the tear or

crack. This sanding will allow better adhesion. Blow off dust.

4. Apply masking tape on the front side of the repair.


6. Use a clean non-porous surface to mix POWER-FIBER and cream

hardener in a mixing ratio of 3:100 (POWER-FIBER: Hardener) by

weight (3:100 = 3%, use 4% when weather is cold). Mix until the

color of the hardener is no longer visible.

7. Apply mixed POWER-FIBER into the repair area using firm

pressure to ensure maximum adhesion and to release possible

trapped air. Spread from the repair area outwards or sideways 1.5

to 2in. to each side of the damage area making a gradual taper

leaving a bulk reinforcement behind the main repair area. This

bulk will form a reinforcement nerve once it sets.

8. On the front side, sand the surface making a “V” groove along the

repair area starting on the sides of the crack and deepen into the

center of the crack. The idea is to form a groove that opens to

about 1 to 1.5 inches wide to fit the product. Do this all the way

from the edge of the bumper to where the tear stops. Leave no

square edges in the repair area. Blow off and dry wipe.

9. Estimate the quantity of POWER-FIBER you will need to fill the

groove. Proceed to mix and apply POWER-FIBER following the

same mixing procedure as above. The idea is to be able to sand

and level the surface and still retain product in the groove.


SANLOZ GROUP INC.



McAllen Texas 78501

+52 (81) 84 78 02 90

+52 (81) 18 03 12 57


Cosmetic Finishing:

1. Sand POWER-FIBER with 80 to 120 grit sandpaper.

2. Apply K-BOND (Body filler for bumpers and plastics) as a finishing

over the front of the repair area and over the POWER FIBER cured

repair.


RECOMMENDATIONS:


WARNINGS:



causes dizziness ,headache or nausea. Intentional misuse by deliberately concentrating and inhaling the contents may be









SANLOZ GROUP INC.



McAllen Texas 78501

+52 (81) 84 78 02 90

+52 (81) 18 03 12 57


RE-VIVE

Hydrating Resin Solution

RE-VIVE is a polyester resin based compound that contains

molecular stabilizers and diluents that provide fluidity.

RE-VIVE offers:

+ Easy hydration of polyester based pastes like body fillers,

putties and adhesives.

+ Properties that allow thinning body fillers to cover surfaces

with thin layers to eliminate pinholes, scratches left by sand

paper and / or small ripples.

+ Properties to dilute products that need to be used in cracks

that need to be filled.

Advantages: +Easy to homogenize with any polyester resin based product.

+ Easy to add and dose

+It hardens with benzoyl peroxide, body filler cream hardener


1. Add up to 30% in volume of RE-VIVE to the product you

would like to hydrate

2. Be sure to homogenize by mixing from bottom up the product

inside the can.

3. To those materials that have been hydrated it is recommended

to add a little more cream hardener, especially those used for

thin layers. Use up to 4% of hardener for best curing.



SANLOZ GROUP INC.



McAllen Texas 78501

+52 (81) 84 78 02 90

+52 (81) 18 03 12 57


RECOMMENDATIONS:


WARNINGS:












SANLOZ GROUP INC. - KOVERBOND · 2018-11-17 · SANLOZ GROUP INC. (KOVERBOND SPECIFICATION SHEETS)...

Documents

Transcript of SANLOZ GROUP INC. - KOVERBOND · 2018-11-17 · SANLOZ GROUP INC. (KOVERBOND SPECIFICATION SHEETS)...