GRILLED CHEESE SANDWICH Goal to make grilled cheese sandwich.
Sandwich stations - Textalk€¦ · Sandwich stations models 4 16 – table length 1660mm 12 –...
Transcript of Sandwich stations - Textalk€¦ · Sandwich stations models 4 16 – table length 1660mm 12 –...
Sandwich stations
2
Sandwich stations
Soft sealing rubber
Removable refrigerating unit,
washable filter, electronic control
Thermal insulator – two
component PU foam.
Table is filled by liquid
pouring method -
without seams
Height-adjustable legs.
Adjustment height is 32 mm up
and 26 mm down
Drawers with stainless
steel guides of
Scandinavian type
All drawers provide
positioning of easily-
removable gastro norms,
what makes table easy to
wash and clean.
Gastro norms are washed
in dishwashing machine
Cold air circulation
inside the equipment
3
Refrigerating unit MD 6160Z
This refrigerating unit represents a
dismountable refrigerating cassette,
equipped with evaporator and fans.
Standard cassettes are interchangeable
and fit to any refrigerating table 2Freeze.
Cassette replacement takes 2-3 minutes,
what gives a supplementary guarantee
of products storage quality.
Refrigerant type- R134a.
Refrigerant weight- 0,21Кг.
Power consumption-300 Watt.
Digital temperature controller.
Integrated system that protects the
unit in case of electricity outages.
Automatic defrost control.
Sandwich stations models
4
16 – table length 1660mm
12 – table length 1260mm
08 – table length 860mm
CTSM – Sandwich stations with 900 mm
height and temperature conditions
+2°C…+4°C.
The front part of the table- refrigerated
surface for the exposition and sale of ready-made sandwiches.
CTSMG – Sandwich stations with 900 mm
height and temperature conditions
+2°C…+4°C.
Tables equipped with doors and drawers
5
1 – swing-door with
one shelf inside
2 – unit consisting of 2 drawers
(slides + frame ) for GN1/1-200
3 – unit consisting of 3 drawers
( slides + frame ) for GN1/1-150 4 – unit consisting of 4 drawers
( slides + frame) for GN1/1-100
MD – refrigerating unit (0.3кW 230V 50Hz)
and drawer above
Optional components
6
P – optional
wire shelf
G – holder with gastro norms in the refrigerated drawer.
Combinations are possible
W – casters set.
Caster height- 125 mm.
L – LED lighting
Optional components
7
C – plinth made from wood chipboard frontally covered with stainless steel
DS – front decorative panel from chip board
Optional accessories
8
Holder for wrappings Support for bottles with sauces
Cabinet for impulse products selling
Cutting board
Holder for tongs and spoon
Sandwich stations examples
CTSM08.3.MD CTSM12.3.MD.1
9
CTSM16.3.3.MD.1
CTSMG08.3.MD CTSMG12.3.MD.3 CTSMG16.3.3.MD.3
10
CTSM08.3.MD
11
CTSM12.3.MD.1
12
CTSM16.3.3.MD.1
13
CTSMG08.3.MD
14
CTSMG12.3.MD.3
15
CTSMG16.3.3.MD.3
Installation example
16
Installation example
17
Installation example
18
Installation example
19