Sandvik Construction A world leader in Construction Module 6 How to sell Sandvik cone crushers.
-
Upload
nicholas-cunningham -
Category
Documents
-
view
247 -
download
4
Transcript of Sandvik Construction A world leader in Construction Module 6 How to sell Sandvik cone crushers.
Sandvik Construction2
Sandvik Cone Crushers How to sell cone crushers Eccentric bush
Throw Indicator
Throws Available
Sandvik Construction3
There are a number of steps as material passes through the chamber
Sandvik Cone Crushers How to sell cone crushers Speed
When the falling stone is caught, it is trapped and to some degree pushed upwards.
Sandvik Construction5
1. Automatically adjusts for; Changes in feed material size. Changes in material toughness. Changes in material moisture content. Manganese wear.
2. Protects the crusher against overloads during normal operation.
3. Allows easy adjustment of product size. On the fly adjustment
4. Maintains the maximum crusher performance. Independent of feed conditions.
5. Improves production and product quality.
Sandvik Cone Crushers How to sell cone crushers ASRi
Sandvik Construction6
A crusher can be operated in 4 modes Manual: With ASRi disconnected.
With ASRi operational a choice of 3 program modes
Auto CSS: This program will always try and hold a pre-set CSS setting for controlled reduction..
Multi CSS: This program will allow operation between two pre-set CSS over pre-set times and is used when a non-standard product curve is preferred.
Auto Load: This program basically regulates on either power or pressure whichever limit is reached first and so minimises the setting for maximum reduction.
Sandvik Cone Crushers How to sell cone crushers ASRi
Sandvik Construction7
Sandvik Cone Crushers How to sell cone crushers The complete package
Top serviceability – safer and easier maintenance and inspection
Simple and strong design philosophy
Strong unibody structure, mainshaft supported at both ends and few moving parts
Hydroset™ system – online adjustment under full load
ASRi™ – Automatic Setting Regulation
True automation of the setting, thereby facilitating online adjustment during full load
and ensuring peak performance at all times
CLP crushing chambers
Constant Liner Performance maintains the feed opening and performance during
the entire service life of the liners
Adjustable throw – maximize performance and balance capacity within the process
Sandvik Construction9
Sandvik Cone Crushers How to sell cone crushers CH540 performance stategy
CH430
CH540
+ 90 %
Keep!
Increase!
44 % larger eccentric throw!
Increase!
30 % higher crushing force!
Improve!
Sandvik Construction10
Sandvik Cone Crushers How to sell cone crushers CH550 performance stategy
CH440
CH550
+ 50 %
Keep!
Increase!
20 % larger eccentric throw!
Increase!
30 % higher crushing force!
Improve!
Sandvik Construction11
Sandvik Cone Crushers How to sell cone crushers CH540 and CH550 comparison
Same feed opening
Same cone diameter
Installed power increased
Maximum throw increased to 52mm
Strength increased
Similar foot print and profile
Sandvik Construction12
Sandvik Cone Crushers How to sell cone crushers CH540 and CH550
Spider arm positions improved Positive effect on material flow
6 arm bottomshell
Sandvik Construction13
Sandvik Cone Crushers How to sell cone crushers CH540 and CH550 the Perfect match
Compact and high performing HYDROCONE crushers.52mm throw and more crushing force.
Manganese (cone/mantle) designed to achieve higher performance
ASRi as standard
Dump valve as tramp iron protection
Plastic free
Hydraulic motor bracket
IE3 motors
Unique look
Sandvik Construction14
Sandvik Cone Crushers How to sell cone crushers CH540 and CH550 Maintenance/EHS.
Well-defined lifting points for safe handling of heavy components.
No welding when changing wear parts*
Hardox/rubber linings in bottom shell and on cone plates
Lifting tools for cone and mantle available
Sandvik Construction15
Sandvik Cone Crushers How to sell cone crushers Parts improvement/EHS
Wear resistant spider bushing
Specifically developed alloy
Increased lifespan by up to 100 percent
Lifting holes
200%
100%
Sandvik Construction16
Sandvik Cone Crushers How to sell cone crushers Parts improvement/EHS
Improved Mainshaft sleeve
Tapered fit + oil grooves
With the new design there is no heating or grinding required, also making the change safer.
The new mainshaft sleeve can be changed in less than 15 minutes. This means up to 80 percent quicker change compared to current mainshaft sleeves on the market.
15min
90min
Sandvik Construction17
Sandvik Cone Crushers How to sell cone crushers Parts improvement/EHS
Improved Mainshaft sleeve
The new simplified procedure only requires a torque wrench and a hand driven oil pump.
1 2 3
4 5 6
Sandvik Construction18
Sandvik Cone Crushers How to sell cone crushers Parts improvement/EHS
Improved Step components New oil groove pattern improve lubrication, which reduces wear and friction by up to 10%.
The all-new Step Components are partly run in during manufacturing enabling up to 80% faster break in.
Holes for attaching lifting tool, new lifting tool.
Sandvik Construction19
Sandvik Cone Crushers How to sell cone crushers CH540 Estimated capacity
CH430, chambers EF to EC CH540, chambers EF to EC
Each line represents a combination of an available crushing chamber and an eccentric throw.
Granite, 2.65 t/m3
PlantDesigner estimation
CH440, chambers EF to EC
CH540CH540
CH540
Sandvik Construction20
Sandvik Cone Crushers How to sell cone crushers CH550 Estimated capacity
CH440, chambers F to EC CH550, chambers F to EC
Each line represents a combination of an available crushing chamber and an eccentric throw.
CH
550
CH660, chambers EF to EC
Granite, 2.65 t/m3
PlantDesigner estimation
CH
550
Sandvik Construction21
Sandvik Cone Crushers How to sell cone crushers CH550/CH540 Improved product shape