Sample storage, identifi cation & handling - 2D barcoded tubes · range of sample storage tubes....
Transcript of Sample storage, identifi cation & handling - 2D barcoded tubes · range of sample storage tubes....
1
Sample storage, identifi cation & handlingProduct catalogue
1
Streamline sample storage, identificationand handling with AltemisLab™.
Founded by an experienced team with considerable industry knowledge. AltemisLab utilises this expertise to deliver the highest quality products and exceptional service.
Helping customers to map workflows and identify the tools that will realise practical, financial and time saving benefits.
AltemisLab 2D barcoded tubes, barcode readers, de-capping, capping and handling equipment, labelling technology, and lab tools symbolise a new era of efficiency. With AltemisLab you can rest assured that compliance, quality control and manufacturing excellence are unrivalled.
A commitment to only work with the best
AltemisLab is delighted to partner with BioMicrolab. They have been manufacturing robotic systems for over 20 years and are experts in tube automation. Almost every component of their entire product range is designed, developed, manufactured and assembled at their headquarters in California, USA.
2
Contents
AltemisLab™ Introduction
2D barcoded AlteTubes™SBS rack formatLarge rack format
Barcode readers SampleScan PlusSampleScan E-SeriesSampleScan HSSampleScan HS Cryo
Automated screw cap handling XL Capping stationXL AutoCap™ AltemisLab Advantage 96
Automated tube & vial handling XL9™ & XL20™ XL100™ & XL200™
Automated tube & vial labellingXL LabelPro™
Lab tools VolumeCheck™ Rack thawing station™Tube selector™AlteTube™ workstation rackAlteTube™ pick up deviceAlteTube™ aluminium blocksAlteTube™ ice pans & ice buckets
AltemisLab™ service & support
01
030922
3133343535
37383940
414344
4748
4950515151525252
53
3
AlteTube™Superior quality 2D barcoded tubes to assist sample identification
The founders of AltemisLab have been working with 2D barcoded tubes since 2000, when this technology was first used by pharmaceutical companies for compound storage.
Using our knowledge and experience we have set out to perfect 2D tube design and we are proud to introduce our AlteTube range of sample storage tubes.
Whatever your need, if you have a new sample storage requirement or if you are considering an automated system, we have the sample tube solution for you.
Transforming lab technique
4
High quality 2D barcoded tubes to assist sample identification
100% quality checksEvery tube meets our exacting standards for readability. Every barcode is checked to guarantee uniqueness across the full AlteTube range.
Product developmentCreating new and custom product solutions to meet future demands.
Razor-sharp clarityPrecise design and manufacturing techniques ensure all tubes and rack lids have exceptional transparency.
Quality managementOur manufacturing facility is ISO 9001 and ISO 14001 accredited.
Additive freeAlteTube products and packaging components are certified free from heavy metals, phthalates, latex, and Bisphenol A.
Purity assuranceClean room production. All tubes are manufactured from medical grade virgin polypropylene and certified DNase, RNase and Endotoxin (Pyrogen) free.
IDENTIFY PRESERVE PROCESS
5
AlteTube™Septum cap tubes in SBS rack format
Thread type InternalInternal
0.75ml Septum cap
0.5ml Septum cap
none
0.75ml Septum cap
Internal Internal
1.4ml Septum cap
1.1ml Septum cap
Max working volume - ml 0.35 0.59 0.65 0.85 0.99
Min storage temperature - °C -80 -80 -80 -80 -80
Tube height - mm 20 27 33.5 36.5 44
Tube height with cap - mm 21 28 34.5 37.5 45
Inner diameter - mm 6.8 6.8 6.8 6.8 6.8
Outer diameter with cap - mm 8.4 8.4 8.4 8.4 8.4
Pitch - mm 9.0 9.0 9.0 9.0 9.0
Identification 2D DataMatrix barcode on base
White on black, 3mm x 3mm, 2 alpha prefix (AL) & 8 numeric Custom prefix available / Black on white available
Septum caps
Non-Sterile / Sterile (Gamma) / Ethylene oxide (EtO) on request
Bulk packed tubes, no cap – 960/caseRacked tubes, no cap – 96/rack, 10 racks/case Septum caps – 10 mats/case Empty racks – 10 racks/case
8 x 12 - SBS (96 tubes)
Polypropylene base with polycarbonate lid
2D DataMatrix barcode
Capping options
Sterility options
Packaging options
Rack format
Rack material
Rack height with lid - mm 26 31 39 44 50
6
AlteTube™Screw cap tubes in SBS rack format
Thread type InternalInternal
0.75ml Screw cap
0.5ml Screw cap
Internal
1.1ml Screw cap
Internal
1.4ml Screw cap
Max working volume - ml 0.3 0.49 0.75 0.92
Min storage temperature - °C -196
Warning: Caps should not be immersed in Liquid Nitrogen.AlteTubes should be stored in gas phase Liquid Nitrogen (GPLN) only.
-196 -196 -196
Tube height - mm 20 27 36.5 44
Tube height with cap - mm 27 34 43.5 51
Inner diameter - mm 6.8 6.8 6.8 6.8
Outer diameter with cap - mm 8.4 8.4 8.4 8.4
Pitch - mm 9.0 9.0 9.0 9.0
Identification 2D DataMatrix barcode on base
White on black, 3mm x 3mm, 2 alpha prefix (AL) and 8 numericCustom prefix available / Black on white available
Screw caps
2D DataMatrix barcode
Capping options
Non-Sterile / Sterile (Gamma) / Ethylene oxide (EtO) on request
Bulk packed tubes, no cap – 960/caseBulk packed tubes, precapped – 960/caseRacked tubes, no cap – 96/rack, 10 racks/case Racked tubes, precapped – 96/rack, 10 racks/caseBulk screw caps – 960/case Empty racks – 10 racks/case
8 x 12 - SBS (96 tubes)
Polypropylene base with polycarbonate lid
Sterility options
Packaging options
Rack format
Rack material
Rack height with lid - mm 31 37 50 55.5
7
Warning: Caps should not be immersed in Liquid Nitrogen.AlteTubes should be stored in gas phase Liquid Nitrogen (GPLN) only.
Identification 2D DataMatrix barcode on base, 1D barcode and human readable code on side
White on black, 3mm x 3mm, 2 alpha prefix (AL) and 8 numericCustom prefix available / Black on white available
Screw caps
Non-sterile / Sterile (Gamma) / Ethylene oxide (EtO) on request
Bulk packed tubes, no cap – 50/bag, 10 bags/caseBulk packed tubes, precapped – 50/bag, 10 bags/caseRacked tubes, no cap – 81/rack, 1 rack/case Racked tubes, precapped – 81/rack, 1 rack/caseScrew caps – 500/case Empty racks – 1 rack/case
25/bag, 10 bags/case25/bag, 10 bags/case
9 x 9 (81 tubes)
Polycarbonate
132.5 (l) x 132.5 (w) x 52 (h)Hole diameter: 12.8
132.5 (l) x 132.5 (w) x 90 (h) Hole diameter: 12.8
2D DataMatrix barcode
Capping options
Sterility options
Packaging options
Rack format
Rack material
Rack dimensions - mm
AlteTube™Screw cap tubes in large rack format
Thread type External ExternalInternal Internal
1.2ml Screw cap
1.2ml Screw cap
5ml Screw cap
2ml Screw cap
Internal External
5ml Screw cap
2ml Screw cap
Max working volume - ml 1.2 1.2 1.8 1.8 4.5 4.5
Min storage temperature - °C -196 -196 -196 -196 -196 -196
Tube height - mm 32.50 39.95 38.55 44.9 76.72 84.15
Tube height with cap - mm 41.75 42.15 47.75 47.15 86.15 86.40
Inner diameter - mm 10.67 9.48 10.44 9.44 10.65 9.50
Outer diameter with cap - mm 12.50 13.15 12.50 13.20 12.70 13.20
8
IDENTIFY PRESERVE PROCESS
AlteTube™ 2D DataMatrix barcodes adhere to the ECC200 standard
Code recovery built into ECC200Reed-Solomon error correction codes in the DataMatrix reconstructs and verifies data for improved accuracy. DataMatrix barcodes can still be decoded if damaged by up to 30%.
Benefits of 2D DataMatrix barcodes— Never misreads or reports a wrong number.
— Accuracy at contrast levels as low as 20%.
— Significantly smaller compared to 1D barcodes.
— Capture from any direction.
— Decode multiple barcodes simultaneously.
ModulesBlack and white squares represent the data.
Clock patternDotted lines enable decoding of the pattern.
Finder barsL-shaped frame that locates the code.
Quiet zonePrevents any visual interference.
Anatomy of a 2D DataMatrix barcode
9
AlteTube™2D barcoded tubes in SBS rack format
Innovative manufacturing process
AlteTube SBS format tubes are manufactured by a highly specialised and automated process, known as dual injection.
Dual injection optimises co-polymerisation of clear and black polypropylene during one cycle. Creating a powerful molecular bond between the clear tube and the black base.
The result is the single piece AlteTube.
Permanent 2D barcode
The 2D DataMatrix barcode is laser etched on the black base of the tube.
This highly durable 2D barcode is designed to survive in the harshest of lab environments.
10
Internal thread screw capsManufactured by dual injection of ThermoPlastic Elastomer (TPE) and medical grade polypropylene.
Exceptional performanceSingle piece cap provides a superior fixed seal, eliminating the risk of leakage or cross-threading.
Temperature range-196°C to 121°C.
Temperature range-80°C to 121°C.
Septum cap mats96 individual TPE caps for SBS format tubes.
Easy application and removalFlexible backing mat allows simultaneous capping of 96 tubes. Includes a tab design to assist manual decapping.
Capping flexibilityAlteTubes are compatible with screw caps and TPE
septum caps.
It’s all about the closure
Warning: Caps should not be immersed in Liquid Nitrogen.AlteTubes should be stored in gas phase Liquid Nitrogen (GPLN) only.
11
AlteTube™2D barcoded SBS racks
SBS format racksStore 96 tubes in 8 x12 format. Compatible with automation equipment for processing of 8, 12 or 96 tubes.
International SBS/ANSI standardsRack tolerances are precisely checked using advanced video measuring equipment.
Robust and durableMade from polypropylene base and polycarbonate lid.
Temperature range-196°C to 121°C.
Rack identificationIndividual racks are identified by one unique code in three formats. Embedded 2D barcode on the rack base with matching 1D barcode and human readable code on the rack – A1 short side.
100% quality checksEvery rack barcode is checked for readability and uniqueness across the AlteTube range.
12
Anti-rotate rackTubes grip in place allowing easy capping or decapping by hand or with automation equipment.
Locking lidSecurely closed lids for storage and shipping of samples.
Hinged lidReduces the risk of sample contamination.
Completely detached lidFull access for processing by hand or automation equipment.
IDENTIFY PRESERVE PROCESS
13
0.5ml Septum cap AlteTube™ SBS rack format
0.5ml Septum cap
Max working volume - ml 0.35
Min temperature - °C -80
Tube height - mm 20
Tube height with TPE cap - mm 21
Inner diameter - mm 6.8
Outer diameter - mm 8.4
Identification 2D DataMatrix barcode
Rack format 8 x 12 - SBS (96 tubes)
Rack height with lid - mm
Sterility options Non-sterileSterile (Gamma)EtO on request
26
Part No. Description Packaging
201000 0.5ml 2D barcoded internal thread storage tube, SBS rack format, no cap, non-sterile
960/case
201004 0.5ml 2D barcoded internal thread storage tube, SBS rack format, no cap, non-sterile
Racked 96/rack 10 racks/case
201501 Empty SBS 96 format rack for 0.5ml 2D barcoded storage tube for use with TPE septum cap only
Rack 10/case
201802 Septum caps for 96 SBS format tubes, natural 96/mat 10 mats/case
14
0.75ml Septum cap AlteTube™ SBS rack format
0.75ml Septum cap
Max working volume - ml 0.59
Min temperature - °C -80
Tube height - mm 27
Tube height with TPE cap - mm 28
Inner diameter - mm 6.8
Outer diameter - mm 8.4
Identification 2D DataMatrix barcode
Rack format 8 x 12 - SBS (96 tubes)
Rack height with lid - mm
Sterility options Non-sterileSterile (Gamma)EtO on request
31
Part No. Description Packaging
201012 0.75ml 2D barcoded internal thread storage tube, SBS rack format, no cap, non-sterile
Bulk packed 960/case
201018 0.75ml 2D barcoded internal thread storage tube, SBS rack format, no cap, non-sterile
Racked 96/rack 10 racks/case
201503 Empty SBS 96 format rack for 0.75ml 2D barcoded storage tube for use with TPE septum cap only
Rack 10/case
201802 Septum caps for 96 SBS format tubes, natural 96/mat 10 mats/case
15
0.75ml Septum cap [only] AlteTube™ SBS rack format
0.75ml Septum cap [only]
Max working volume - ml 0.65
Min temperature - °C -80
Tube height - mm 33.5
Tube height with TPE cap - mm 34.5
Inner diameter - mm 6.8
Outer diameter - mm 8.4
Identification 2D DataMatrix barcodeon tube base
Rack format 8 x 12 - SBS (96 tubes)
Rack height with lid - mm
Sterility options Non-sterileSterile (Gamma)EtO on request
39
Part No. Description Packaging
201014 0.75ml 2D barcoded storage tube, for use with TPE septum cap only, SBS rack format, no cap, non-sterile
Bulk packed 960/case
201022 0.75ml 2D barcoded no thread storage tube, SBS rack format, no cap, non-sterile
Racked 96/rack 10 racks/case
201504 Empty SBS 96 format rack for 0.75ml septum cap only 2D barcoded storage tube.
Rack 10/case
201802 Septum caps for 96 SBS format tubes, natural 96/mat 10 mats/case
16
1.1ml Septum cap AlteTube™ SBS rack format
1.1ml Septum cap
Max working volume - ml 0.85
Min temperature - °C -80
Tube height - mm 36.5
Tube height with TPE cap - mm 37.5
Inner diameter - mm 6.8
Outer diameter - mm 8.4
Identification 2D DataMatrix barcode
Rack format 8 x 12 - SBS (96 tubes)
Rack height with lid - mm
Sterility options Non-sterileSterile (Gamma)EtO on request
44
Part No. Description Packaging
201030 1.1ml 2D barcoded internal thread storage tube, SBS rack format, no cap, non-sterile
Bulk packed 960/case
201034 1.1ml 2D barcoded internal thread storage tube, SBS rack format, no cap, non-sterile
Racked 96/rack 10 racks/case
201506 Empty SBS 96 format rack for 1.1ml 2D barcoded storage tube for use with TPE septum cap only
Rack 10/case
201802 Septum caps for 96 SBS format tubes, natural 96/mat 10 mats/case
17
1.4ml Septum cap AlteTube™ SBS rack format
1.4ml Septum cap
Max working volume - ml 0.99
Min temperature - °C -80
Tube height - mm 44
Tube height with TPE cap - mm 45
Inner diameter - mm 6.8
Outer diameter - mm 8.4
Identification 2D DataMatrix barcode
Rack format 8 x 12 - SBS (96 tubes)
Rack height with lid - mm
Sterility options Non-sterileSterile (Gamma)EtO on request
50
Part No. Description Packaging
201042 1.4ml 2D barcoded internal thread storage tube, SBS rack format, no cap, non-sterile
Bulk packed 960/case
201046 1.4ml 2D barcoded internal thread storage tube, SBS rack format, no cap, non-sterile
Racked 96/rack 10 racks/case
201508 Empty SBS 96 format rack for 1.4ml 2D barcoded storage tube for use with TPE septum cap only
Rack 10/case
201802 Septum caps for 96 SBS format tubes, natural 96/mat 10 mats/case
18
0.5ml Internal thread screw cap AlteTube™ SBS rack format
0.5ml Internal screw cap
Max working volume - ml 0.3
Min temperature - °C -196 (GPLN)
Tube height - mm 20
Tube height with screw cap - mm 27
Inner diameter - mm 6.8
Outer diameter - mm 8.4
Identification 2D DataMatrix barcode
Rack format 8 x 12 - SBS (96 tubes)
Rack height with lid - mm
Sterility options Non-sterileSterile (Gamma)EtO on request
31
Part No. Description Packaging
201000 0.5ml 2D barcoded internal thread storage tube, SBS rack format, no cap, non-sterile
Bulk packed 960/case
201002 0.5ml 2D barcoded internal thread storage tube, SBS rack format, precapped with Screw Cap, non-sterile
Bulk packed 960/case
201006 0.5ml 2D barcoded internal thread storage tube, SBS rack format, no cap, non-sterile
Racked 96/rack 10 racks/case
201008 0.5ml 2D barcoded internal thread storage tube, SBS rack format, precapped with screw cap, non-sterile
Racked 96/rack 10 racks/case
201500 Empty SBS 96 format rack for 0.5ml 2D barcoded storage tube
Rack 10 racks/case
201700 Screw cap for 2D barcoded internal thread storage tube, SBS 96 rack format, yellow, non-sterile
Bulk 960/case
19
0.75ml Internal thread screw cap AlteTube™ SBS rack format
0.75ml Internal screw cap
Max working volume - ml 0.49
Min temperature - °C -196 (GPLN)
Tube height - mm 27
Tube height with screw cap - mm 34
Inner diameter - mm 6.8
Outer diameter - mm 8.4
Identification 2D DataMatrix barcode
Rack format 8 x 12 - SBS (96 tubes)
Rack height with lid - mm
Sterility options Non-sterileSterile (Gamma)EtO on request
37
Part No. Description Packaging
201012 0.75ml 2D barcoded internal thread storage tube, SBS rack format, no cap, non-sterile
Bulk packed 960 tubes/case
201016 0.75ml 2D barcoded internal thread storage tube, SBS rack format, precapped with Screw Cap, non-sterile
Bulk packed 960/case
201020 0.75ml 2D barcoded internal thread storage tube, SBS rack format, no cap, non-sterile
Racked 96 tubes/rack 10 racks/case
201024 0.75ml 2D barcoded internal thread storage tube, SBS rack format, precapped with screw cap, non-sterile
Racked 96 tubes/rack 10 racks/case
201502 Empty SBS 96 format rack for 0.75ml 2D barcoded storage tube
Rack 10 Racks/Case
201700 Screw cap for 2D barcoded internal thread storage tube, SBS 96 rack format, yellow, non-sterile
Bulk 960 caps/case
20
1.1ml Internal thread screw cap AlteTube™ SBS rack format
1.1ml Internal screw cap
Max working volume - ml 0.75
Min temperature - °C -196 (GPLN)
Tube height - mm 36.5
Tube height with screw cap - mm 43.5
Inner diameter - mm 6.8
Outer diameter - mm 8.4
Identification 2D DataMatrix barcode
Rack format 8 x 12 - SBS (96 tubes)
Rack height with lid - mm
Sterility options Non-sterileSterile (Gamma)EtO on request
50
Part No. Description Packaging
201030 1.1ml 2D barcoded internal thread storage tube, SBS rack format, no cap, non-sterile
Bulk packed 960 tubes/case
201032 1.1ml 2D barcoded internal thread storage tube, SBS rack format, precapped with Screw Cap, non-sterile
Bulk packed 960/case
201038 1.1ml 2D barcoded internal thread storage tube, SBS rack format, precapped with screw cap, non-sterile
Racked 96 tubes/rack 10 racks/case
201036 1.1ml 2D barcoded internal thread storage tube, SBS rack format, no cap, non-sterile
Racked 96 tubes/rack 10 racks/case
201505 Empty SBS 96 format rack for 1.1ml 2D barcoded storage tube
Rack 10 Racks/Case
201700 Screw cap for 2D barcoded internal thread storage tube, SBS 96 rack format, yellow, non-sterile
Bulk 960 caps/case
21
1.4ml Internal thread screw cap AlteTube™ SBS rack format
1.4ml Internal screw cap
Max working volume - ml 0.92
Min temperature - °C -196 (GPLN)
Tube height - mm 44
Tube height with screw cap - mm 51
Inner diameter - mm 6.8
Outer diameter - mm 8.4
Identification 2D DataMatrix barcode
Rack format 8 x 12 - SBS (96 tubes)
Rack height with lid - mm
Sterility options Non-sterileSterile (Gamma)EtO on request
55.5
Part No. Description Packaging
201042 1.4ml 2D barcoded internal thread storage tube, SBS rack format, no cap, non-sterile
Bulk packed 960 tubes/case
201044 1.4ml 2D barcoded internal thread storage tube, SBS rack format, precapped with Screw Cap, non-sterile
Bulk packed 960/case
201048 1.4ml 2D barcoded internal thread storage tube, SBS rack format, no cap, non-sterile
Racked 96 tubes/rack 10 racks/case
201050 1.4ml 2D barcoded internal thread storage tube, SBS rack format, precapped with screw cap, non-sterile
Racked 96 tubes/rack 10 racks/case
201507 Empty SBS 96 format rack for 1.4ml 2D barcoded storage tube
Rack 10 Racks/Case
201700 Screw cap for 2D barcoded internal thread storage tube, SBS 96 rack format, yellow, non-sterile
Bulk 960 caps/case
22
AlteTube™2D barcoded tubes in large rack format
Secure manufacturing AlteTube large format tubes are manufactured using a highly robust and precise method.
The black polypropylene disc is inserted under high pressure and securely captured by the retaining ring.
Once captured the disc cannot be removed.
Permanent barcodes The 2D DataMatrix barcode is laser etched on the black disc in the base of the tube.
The matching 1D barcode and human readable code are laser etched onto the tube wall.
This highly durable 2D barcode is designed to survive in the harshest of lab environments.
23
Internal thread screw capsManufactured by dual injection of ThermoPlastic Elastomer (TPE) and medical grade polypropylene.
Exceptional performanceSingle piece cap provides a superior fixed seal, elimianting the risk of leakage or cross-threading.
Cap insertsSecurely plug into internal thread caps to provide colour identification.
Temperature range-196°C to 121°C.
Temperature range-196°C to 121°C.
External thread screw capsManufactured from medical grade polypropylene. Specially designed lip inside the cap contains the silicon O-ring, ensuring a leak proof seal.
It’s all about the closure
Warning: Caps should not be immersed in Liquid Nitrogen.AlteTubes should be stored in gas phase Liquid Nitrogen (GPLN) only.
IDENTIFY PRESERVE PROCESS
24
AlteTube™2D barcoded large format racks
Large format racksStore 81 tubes in a 9x9 format.
Anti-rotate rackTubes grip in place for easy capping or
decapping by hand.
Robust and durableMade from polycarbonate.
Rack identificationIndividual racks are identified by one unique code in three formats. Embedded 2D barcode on the base of the rack with matching 1D barcode and human readable codes on the rack wall.
100% quality checksEvery rack barcode is checked for readability and uniqueness across the AlteTube range.
Temperature range-196°C to 121°C.
25
1.2ml Internal thread screw cap AlteTube™ Large rack format
1.2ml Internal screw cap
Max working volume - ml 1.2
Min temperature - °C -196 (GPLN)
Tube height - mm 32.50
Tube height with screw cap - mm 41.75
Inner diameter - mm 10.67
Outer diameter - mm 12.50
Identification 2D DataMatrix, 1D barcode and human readable code
Rack format 9 x 9 (81 tubes)
Rack height with lid - mm
Sterility options Non-sterileSterile (Gamma)EtO on request
52
Part No. Description Packaging
202010 1.2ml 1D & 2D barcoded internal thread storage tube, large rack format, no cap, non-sterile
Bulk packed 50/bag 10 bags/case
202013-1 1.2ml 1D & 2D barcoded internal thread storage tube, large rack format, precapped with screw cap, sterile
Bulk packed 50/bag 10 bags/case
202017-1 1.2ml 1D & 2D barcoded internal thread storage tube, large rack format, precapped with screw cap, sterile
Racked 81/rack 1 rack/case
202500 Empty large 81 format rack for 1.2ml & 2ml 2D barcoded storage tube
Rack 1 rack/case
202601 Screw cap for 1.2ml, 2ml, 5ml 2D barcoded internal thread storage tube, large rack format, non-sterile
Bulk packed 500/case
26
1.2ml External thread screw cap AlteTube™ Large rack format
1.2ml External screw cap
Max working volume - ml 1.2
Min temperature - °C -196 (GPLN)
Tube height - mm 39.95
Tube height with screw cap - mm 42.15
Inner diameter - mm 9.48
Outer diameter - mm 13.15
Identification 2D DataMatrix, 1D barcode and human readable code
Rack format 9 x 9 (81 tubes)
Rack height with lid - mm
Sterility options Non-sterileSterile (Gamma)EtO on request
52
Part No. Description Packaging
202011 1.2ml 1D & 2D barcoded external thread storage tube, large rack format, no cap, non-sterile
Bulk packed 50/bag 10 bags/case
202015-1 1.2ml 1D & 2D barcoded external thread storage tube, large rack format, precapped with screw cap, sterile
Bulk packed 50/bag 10 bags/case
202019-1 1.2ml 1D & 2D barcoded external thread storage tube, large rack format, precapped with screw cap, sterile
Racked 81/rack 1 rack/case
202500 Empty large 81 format rack for 1.2ml & 2ml 2D barcoded storage tube
Rack 1 rack/case
202600 Screw cap for 1.2ml, 2ml, 5ml 2D barcoded external thread storage tube, large rack format, non-sterile
Bulk packed 500/case
27
2ml Internal thread screw cap AlteTube™ Large rack format
2ml Internal screw cap
Max working volume - ml 1.8
Min temperature - °C -196 (GPLN)
Tube height - mm 38.55
Tube height with screw cap - mm 47.75
Inner diameter - mm 10.44
Outer diameter - mm 12.50
Identification 2D DataMatrix, 1D barcode and human readable code
Rack format 9 x 9 (81 tubes)
Rack height with lid - mm
Sterility options Non-sterileSterile (Gamma)EtO on request
52
Part No. Description Packaging
202030 2ml 1D & 2D barcoded internal thread storage tube, large rack format, no cap, non-sterile
Bulk packed 50/bag 10 bags/case
202033-1 2ml 1D & 2D barcoded internal thread storage tube, large rack format, precapped with screw cap, sterile
Bulk packed 50/bag 10 bags/case
202037-1 2ml 1D & 2D barcoded internal thread storage tube, large rack format, precapped with screw cap, sterile
Racked 81/rack 1 rack/case
202500 Empty large 81 format rack for 1.2ml & 2ml 2D barcoded storage tube
Rack 1 rack/case
202601 Screw cap for 1.2ml, 2ml, 5ml 2D barcoded internal thread storage tube, large rack format, non-sterile
Bulk packed 500/case
28
2ml External thread screw cap AlteTube™ Large rack format
2ml External screw cap
Max working volume - ml 1.8
Min temperature - °C -196 (GPLN)
Tube height - mm 44.90
Tube height with screw cap - mm 47.15
Inner diameter - mm 9.44
Outer diameter - mm 13.20
Identification 2D DataMatrix, 1D barcode and human readable code
Rack format 9 x 9 (81 tubes)
Rack height with lid - mm
Sterility options Non-sterileSterile (Gamma)EtO on request
52
Part No. Description Packaging
202031 2ml 1D & 2D barcoded external thread storage tube, large rack format, no cap, non-sterile
Bulk packed 50/bag 10 bags/case
202035-1 2ml 1D & 2D barcoded external thread storage tube, large rack format, precapped with screw cap, sterile
Bulk packed 50/bag 10 bags/case
202039-1 2ml 1D & 2D barcoded external thread storage tube, large rack format, precapped with screw cap, sterile
Racked 81/rack 1 rack/case
202500 Empty large 81 format rack for 1.2ml & 2ml 2D barcoded storage tube
Rack 1 rack/case
202600 Screw cap for 1.2ml, 2ml, 5ml 2D barcoded external thread storage tube, large rack format, non-sterile
Bulk packed 500/case
29
5ml Internal thread screw cap AlteTube™ Large rack format
5ml Internal screw cap
Max working volume - ml 4.5
Min temperature - °C -196 (GPLN)
Tube height - mm 76.72
Tube height with screw cap - mm 86.15
Inner diameter - mm 10.65
Outer diameter - mm 12.70
Identification 2D DataMatrix, 1D barcode and human readable code
Rack format 9 x 9 (81 tubes)
Rack height with lid - mm
Sterility options Non-sterileSterile (Gamma)EtO on request
90
Part No. Description Packaging
202050 5ml 1D & 2D barcoded internal thread storage tube, large rack format, no cap, non-sterile
Bulk packed 25/bag 10 bags/case
20-2053-1 5ml 1D & 2D barcoded internal thread storage tube, large rack format, precapped with screw cap, sterile
Bulk packed 25/bag 10 bags/case
20-2057-1 5ml 1D & 2D barcoded internal thread storage tube, large rack format, precapped with screw cap, sterile
Racked 81/rack 1 rack/case
20-2502 Empty large 81 format rack for 5ml 2D barcoded storage tube
Rack 1 rack/case
202601 Screw cap for 1.2ml, 2ml, 5ml 2D barcoded internal thread storage tube, large rack format, non-sterile
Bulk packed 500/case
30
5ml External thread screw cap AlteTube™ Large rack format
5ml External screw cap
Max working volume - ml 4.5
Min temperature - °C -196 (GPLN)
Tube height - mm 84.15
Tube height with screw cap - mm 86.40
Inner diameter - mm 9.50
Outer diameter - mm 13.20
Identification 2D DataMatrix, 1D barcode and human readable code
Rack format 9 x 9 (81 tubes)
Rack height with lid - mm
Sterility options Non-sterileSterile (Gamma)EtO on request
90
Part No. Description Packaging
202051 5ml 1D & 2D barcoded external thread storage tube, large rack format, no cap, non-sterile
Bulk packed 25/bag 10 bags/case
202055-1 5ml 1D & 2D barcoded external thread storage tube, large rack format, precapped with screw cap, sterile
Bulk packed 25/bag 10 bags/case
202059-1 5ml 1D & 2D barcoded external thread storage tube, large rack format, precapped with screw cap, sterile
Racked 81/rack 1 rack/case
202502 Empty large 81 format rack for 5ml 2D barcoded storage tube
Rack 1 rack/case
202600 Screw cap for 1.2ml, 2ml, 5ml 2D barcoded external thread storage tube, large rack format, non-sterile
Bulk packed 500/case
31
Barcode readers
The BioMicroLab SampleScan series of high-quality barcode readers all include a 5-year warranty. They quickly decode 1D and 2D barcodes on tubes and racks, accelerating sample tracking in labs.
With virtually no installation and user-friendly software, every system is ready to use straight away.
A higher standard in every way.
Capture and decode sample IDs
32
CAPTURE DECODE OUTPUT
Capture technology
SampleScan model
Single barcode reader
Camera
Plus
SBS rack reader
Scanner
E-Series
SBS rack reader
Camera
HS
SBS and large rack reader
Camera
HS Cryo
Scan and decode time
SBS format: 12, 24, 48, 96 and 384 racks
Large format: 81 and 100 racks
Custom rack Yes
YesDetects missing tubes
One-touch scan
Single tube scan
Scans 2D rack ID on rack base
Integration toolkits
Warranty
Network connectivity
Scans 1D Rack ID on rack side
Environment
Dimensions in cm
System requirements
Power
Cold rack compatible
1 second
n/a
Yes
n/a
5 years
n/a
n/a
Yes
n/a
n/a
Yes
5°C to 35°C
10 x 10 x 14
PC or MAC
One USB cable
n/a
8 seconds
Yes
Yes
ActiveX and SDK
5 years
TCP/IP
No
Yes
Yes
Yes
Yes
Yes - 1D reader
5°C to 35°C
31 x 19 x 7
Windows 7, 8, 10
Universal power supply
Condensation reduction system
< 1 second
Yes
Yes
SDK
5 years
No
No
No
Yes - 1D reader
-20°C to 35°C
16 x 11 x 19
Windows 7, 8, 10
Universal power supply
Condensation reduction system
< 3 seconds
Yes
Yes
SDK
5 years
Yes
No
No
Yes
Yes
Yes - 1D reader
-20°C to 35°C
16 x 16 x 24
Windows 7, 8, 10
Universal power supply
Condensation reduction system
33
Plug & PlayQuick set-up with no software to install.
Decode all barcodesCompatible with all tube sizes from any manufacturer.
Instant resultsDisplays 1D & 2D barcodes in any open application.
Decode confi rmationAudio and light alert options.
Small and portableEasy decoding of vertical, angled or fi xed position tube and rack barcodes.
Robust and durableProtective outer casing and anti-scratch scanning window.
Single barcode readerImage capture using camera technology
Part No. Product name
301000 SampleScan Plus
34
Fast rack scannerDecode a 96 SBS format rack in 8 seconds.
Easy to useInitiate scanning via the software or the one-touch scan button.
Fully compatible Decode full or partially fi lled racks of 2D barcoded tubes in SBS rack formats from any manufacturer.
Capture rack barcodesDecode 1D barcodes on any rack side and 2D embedded rack barcodes.
Single tube scanning port Single tube 2D barcode decoding direct to any open application.
Condensation Reduction System (CRS)Internal dual-fan heater maintains scanner temperature at 37.7°C. Rack insulation rim protects the scanning surface.
SBS rack barcode readerImage capture using scanner technology
Part No. Product name
302001 SampleScan E-Series
302050 Barcode reader with mounting bracket for E-series
35
Rapid camera readerDecoding 96 SBS format racks in less than a second and large format racks in less than 3 seconds.
Capture rack barcodesDecode 1D barcodes on any rack side and 2D embedded rack barcodes.
Hands-free Optional foot pedal control.
Operates at -20ºC Camera is protected by the robust and completely sealed outer casing.
Condensation Reduction System (CRS)Rack-riser safeguards the scanning surface from condensation build-up.
Rack compatibilityAll SBS and large rack formats from most manufacturers.
SBS and large rack barcode readers Image capture using camera technology
Part No. Product name
303000 SampleScan HS — For use with SBS rack formats
303050 Barcode reader with mounting bracket for HS
303002 SampleScan HS Cryo — For use with SBS and large rack formats
303051 Barcode reader with mounting bracket for HS Cryo
36
Included with all rack barcode readersWith minimal set-up, the intuitive project-based software is easy to use.
Labware fl exibilityCompatible with all SBS and large format non-SBS racks from any manufacturer.
Automatic rack identifi cationDecode 1D barcodes on any rack side and 2D embedded rack barcodes.
Save projectsEasily switch between different tube rack formats.
Advanced settingsBarcode error handling, detection, reporting of missing tubes and select specifi c tubes for decoding.
Customise output fi le settingsBarcode data and output .csv fi le can be manually edited, and content defi ned by the user.
Integration and network connectivity ActiveX and SDK for easy integration with LIMS software and other robotic systems. Network connectivity with TCP/IP.
SampleScan softwareBarcode rack reader software
37
AltemisLab offers a comprehensive range of decapping and capping systems that can help with the time challenges screw cap tube users often experience.
With the AltemisLab range, automated screw cap decapping and capping is achieved for a variety of tube types and rack formats.
Transforming lab technique.
Walkaway systems for screw capping tasks
Automatedscrew cap handling
XL Capping station XL AutoCap Advantage 96
Operation modes Cap – Decap – Recap Cap – Decap – Recap Cap – Decap – Recap
Tube throughput 1 8 or 12 96
Compatible with racked SBS tubes No Yes Yes
Compatible with glass vials Cap diameter > 10mm No No
Compatible with large volume polypropylene tubes
Cap diameter > 10mm No No
Fresh capping Cap feeder Cap carrier Cap carrier
Integration friendly Yes Yes Advantage 96 CELL
Dimensions - cm 43 x 35 x 56 29 x 65 x 32 35 x 31 x 48
System requirements Windows 10, 8, 7One USB port
Windows 10, 8, 7One USB port
Windows 10, 8, 7One USB or Serial port(Advantage 96 CELL only)
38
Single screw cap handling Decap or recap one vial in 13 seconds.
Walkaway cap feedersAutomatically supply up to 480 fresh caps. Carousel cap feeder compatible with large volume format polypropylene tubes and glass vials with a cap diameter greater than 10mm. Inline cap feeder compatible with Sarstedt screw caps.
XL Capping stationAutomated screw cap handling
Multi-functionalDesigned to operate as a standalone device or integrated with XL Automated tube handlers and other robotic systems. ActiveX and SDK are available for integration projects.
Part No. Product name
403000 XL Capping station
39
Flexible screw cap handlingAutomatically cap, decap & recap tubes by row or column. Compatible with AlteTube and other manufacturer’s 96 format SBS screw cap tubes.
User friendly controlIntuitive and fl exible command selection using the touch screen interface. Select all caps or designated rows / columns.
Functionality Recap tubes or automatically discard used caps. Apply fresh caps from a cap carrier.
Advanced cap tool systemEasily change between internal and external caps.
Sample traceability Internal barcode reader will scan front and side rack 1D barcodes.
Integration friendlyNetworkable. SDK is available. Racks are easily accessed by robotic arm.
XL AutoCap™Automated screw cap handling
Part No. Product name
402000 XL AutoCap
40
Fast screw cap handlingAutomatically cap and decap a full rack of tubes in 10 seconds. Compatible with AlteTube 96 SBS format screw cap tubes.
User friendlyReady to use and no software to setup. All commands are initiated by the four-button control panel.
Functionality Recap tubes or automatically discard used caps. Apply fresh caps from a cap carrier.
Enhanced designPre-set torque levels guarantee all tubes are capped precisely and securely every time.
Sample safetyDrip tray prevents cross-contamination of samples during cap removal.
Standalone/integration modelsIntegration friendly model, Advantage 96 CELL, includes loading carriage for robotic arm and remote-control capability.
Robust engineeringDesigned for low and high throughput. Thorough quality control testing.
Advantage 96 Automated screw cap handling
Part No. Product name
401000 Advantage 96
401001 Advantage 96 CELL
41
The XL series of robotic pick and place systems automate critical sample management tasks.
Select from a wide range of modules and add-on features. Each platform is made to order and based on the current and evolving needs of your lab.
Alleviate bottlenecks, simplify collaboration across systems and standardise processes for a seamless and efficient workflow.
We give you the tools to raise the bar beyond the bench.
Alleviate bottlenecks and standardise processes
Automated tube and vial handling
42
Liquid handling (5ul-1ml)
2D barcode decoding base of tube
1D barcode decoding side of tube
4-Place balance
5-Place balance
Levelcheck™
External ionizer
Screw cap capping and decapping
Screw cap feeder
XL LabelPro™
DMSO detection
BioShake
Enclosures
Thermal blocks and solid-state cooling systems
Cold room models (-10°C)
Rack transfer station
System requirements - Windows 10, 8, 7
Integration toolkits
Base model dimensions in cm — varies with modules & add-ons
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Custom
Yes
Yes
Yes
ActiveX and SDK
XL200: 122 x 77 x 86XL100: 102 x 67 x 71
No
Yes
No
Yes
No
Yes
Yes
No
No
Yes
Yes
No
Yes
Custom
Yes
No
Yes
ActiveX and SDK
XL20: 72 x 53 x 40XL9: 45 x 43 x 40
Opt
iona
l mod
ules
, add
-ons
& a
cces
sorie
s
Maximum tubes/hour
Maximum SBS racks
SBS rack format
Vial and tube size
XL100 & XL200
300
30
Yes
8 – 22mm cap diameter up to 125mm height
XL9 & XL20
700
20
Yes (96 only)
8mm cap diameter
XL series tube and vial handlersModel comparison
PICK PROCESS PLACE
43
Flexible tube handler9 or 20 rack deck capacity. Select from a variety of modules to meet your sample management needs.
Rearray, reformat, cherry pickXL pick and place head enables unaided tube processing.
DMSO hydration checkFully automated DMSO hydration checking of samples.
Cold room compatible unitsMaintain sample temperatures down to -10°C.
Windows based softwareIncluded with all systems. Controls all robotic operations.
Gravimetric volume detection4-place automated balance module and optional XL Ionizer.
SBS racksCompatible with 96 SBS format racked tubes from any manufacturer.
2D barcode readingIn-process decoding of SBS format 2D barcoded tubes.
LevelCheck™ Non-contact volume detection of capped or uncapped samples.
Automated labellingDesign, print and apply labels to tube and vials with data, text, 1D or 2D barcodes and logos.
XL9™ & XL20™Automated tube handling in 96 SBS rack format
44
Sample trackingTwo reader options: 2D and 1D barcode reading on the side or base of tubes.
Rack transfer trayAllows access to XL sorting platform when integrated with other robotic systems.
Intelligent pick headAdjusts to different sizes of vials, tubes or vacutainers.
Rearray, reformat, cherry pickXL pick and place head enables unaided tube processing.
Gravimetric volume detectionIntegrated precision 4- or 5-place balances with external display and XL Ionizer.
Customisable20 or 30 rack deck capacity. Select from a variety of modules to meet your specifi c application needs.
Automated labellingDesign, print and apply labels to tube and vials with data, text, 1D or 2D barcodes and logos.
Capping and decappingDecap & recap screw cap tubes or vials. Automatically apply fresh caps with the integrated carousal or in-line cap feeder.
Windows based softwareIncluded with all systems. Controls all robotic operations.
Labware fl exibilityFully compatible with SBS format tubes and racks of all sizes. Aluminium racks and vial holders are available for other tube types.
Liquid handlingTecan ADP electronic pipette 5ul-1000ul. Utilises a separate Z axis to aliquot and dispense from any tube, vial or rack position. Conductive tips provide liquid level sensing.
Sample temperature integrityCold room compatible. Solid State Cooling systems and Mecour thermal block options for temperature sensitive sampling.
BioshakeFor precision high speed mixing.
XL100™ & XL200™Automated tube and vial handling
45
Included with all XL tube handlersIntuitive windows software provides control of all robotic operations.
Easy programmingControl sorting and re-array operations by importing user generated worklists.
User defined .csv output filesContent and format can be customised.
Software developer’s toolkits ActiveX and SDK allow integration with LIMS, in-house custom programs, other robotics or streamline the processing of input and output files.
XL LabelPro softwareLabel tubes during processing on any XL tube handler. Merge data from external sources to create worklists or easily repeat previous labelling jobs with a project-based workflow.
XL Plus software
XL software
XL100 & XL200 capability
Sort and 2D decode 10
Sort and 1D decode 12
Sort and de-cap 22
Sort, 1D or 2D decode and weigh 23
Capping only 25
Aspirate or dispense 200ul 7
Label a vial 18-22
Common configurations Seconds per vial
XL9 & XL20 capability
Sort 700
Sort, decode 500
Sort, decode and weigh 250
Sort and weigh 300
Sort, decode and LevelCheck 350-400
Sort, decode & DMSO check 350-400
Sort and label 150
Common configurations Tubes per hour
Provides greater flexibility for liquid handling operations. Users employ editable XML scripts to control robotic functions and input work lists to manage sample transfer volumes.
46
Automated tube and vial handling Cost effective options for sample temperature integrity on the bench
Cold room compatibleAll XL platforms are available as cold room compatible models that can operate at -10°C. Units equipped with an automated balance will operate at -4°C.
The compact XL9 and XL20 models can be placed in standard freezers.
Precise temperature control solutionsXL100 or XL200 models can be confi gured with a thermal block that can operate in any standard lab environment.
MéCour thermal block options guarantee precise sample temperature integrity ranging from -90°C to 250°C.
MéCour systems provide real-time feedback and uniform temperature for all sample vials.
47
XL LabelPro™ reduces the time and effort spent on labelling your labware.
Easy to use software allows you to design your label to your exact requirements, including text, barcodes, logos and more.
Integrate with any XL tube handler for automatic labelling and walk away while it completes the repetitive work for you.
A better way
Label your labware to your exact requirements
Automatedtube and vial labelling
XL9 LabelProXL LabelPro XL20 LabelPro XL200 LabelProXL100 LabelPro
Description Standalone Automated Automated Automated Automated
Maximum tube/vial height - mm 125 SBS SBS 100 125
Maximum tube/vial diameter - mm 25 8 8 22 22
Label capped or uncapped tubes Yes
Yes
Yes
n/a
Yes
Yes
Yes
7
Yes
Yes
Yes
18
Yes
Yes
Yes
18
Yes
Yes
Yes
28
Label jacketed, label-free, fl ip-top tubes
Yes Yes Yes Yes Yes
Print text
Print 1D and 2D barcodes
SBS rack capacity
48
DESIGN PRINT APPLY
Perfect label alignmentLabel up to 180 vials per hour with exact label application every time.
High qualityExcellent printing results from the 300- 600 dpi thermal printer.
Job fl exibilityPrint identical or unique labels. Apply pre-printed labels.
Content controlInput fi les to print unique labels with variable data. Fix all data or combine different data types on labels.
Label design utility Customise labels to include text and images in any direction. Print 1D and 2D barcodes, human readable text, JPEGs, logos, reference codes and symbols.
LIMS integration ready User defi nable output fi les.
All electric operationNo compressed air is required.
Durable labelsResistant to smudging, tearing, chemical damage and -196°C freezing.
Typical label sizes10mm x 33mm for 1.4ml SBS format tubes 25mm x 25mm for 2ml large format tubes
49
Suitable for many applicationsSample library inventory management, volume checking prior and post liquid handling, and QC/QA checks.
Consistent resultsReliable alternative to manual or visual volume inspection.
Acoustic volume measurementNon-contact volume verifi cation for plates, vials and tubes.
Quickly interpret results Colour map displays sample volumes for each well.
Labware fl exibilityCompatible with all plates, vials and tubes in SBS format.
Increase productivityScan a 384 well plate in 30 seconds with fast scan mode.
Multi user lab friendlyTube or plate height adapters are not needed.
AltemisLab is all about looking for better ways to work. Our range of lab tools have been designed to make everyday lab tasks easier.
Transforming lab technique
Useful kit for the labLab tools
VolumeCheck™Acoustic volume measurement for plates and tubes
Part No. Product name
701002 VolumeCheck 384
50
SMART SWIFT ACCURATE
How it works The VolumeCheck uses ultrasonic technology to measure the distance between the sensor and the sample meniscus.
Calibration tables are initially created by recording the sensor-to-sample distance of known sample volumes.
Samples with unknown volumes are scanned and the software extrapolates the distance from the calibration table to give the volume in each well position.
VolumeCheck Software Intuitive and easy to use windows software is included.
Simple set-up Integrated calibration wizard assists with the calibration table creation.
Flexible working Easily switch between saved calibration tables for different labware.
Efficient throughput Select specific rows or columns to scan.
Record data Print plate reports and output results in customisable CSV files.
Easy to read results Individual well volumes are displayed in a customisable colour map.
Integration readyActiveX toolkit and a robotic arm automation adapter are available.
51
AlteTube™ workstation rackHelpful aid Holds 50 large format AlteTubes. Anti-rotate base grips tubes securely for one-handed capping and decapping.
Rack thawing station™Accelerate rack thawingDefrost up to three SBS 96 format racks per hour.
Part No. Product name
702000 Rack thawing station
Tube selector™Easily select tubes Compatible with 96 SBS format racks. No power is required. Select a specifi c row to quickly present tubes.
Part No. Product name
703000 Tube selector
Part No. Product name
704000 AlteTube workstation rack
52
AlteTube™ pick up deviceHandy device Use with internal or external 1.2ml, 2ml & 5ml AlteTubes. Easily pick or decap tubes in the AlteTube workstation rack.
Part No. Product name
705000 AlteTube pick up device for Internal thread caps
705001 AlteTube pick up device for external thread caps
AlteTube™ aluminium cooling/heating blocks Consistent sample temperature Made from solid anodised Aluminium. Compatible with large format AlteTubes. Maintains sample order and prevents wet ice contamination.
Part No. Product name
706000 AlteTube aluminium rectangle block
706001 AlteTube aluminium round block
AlteTube™ ice pans and ice bucketsUse with AlteTube aluminium blocksMade from Ethylene Vinyl Acetate (EVA). Highly durable, chemically resistant and inert to dry ice. Minimum temperature -196°C.
Part No. Product name
707000 AlteTube ice bucket, large 4L
707001 AlteTube ice bucket, medium 2L
708000 AlteTube Ice pan, large 9L
708001 AlteTube Ice pan, medium 2L
708002 AlteTube Ice pan, small 2.5L
708003 AlteTube Ice pan, x-small 1L
708004 AlteTube Ice pan with lid, large 9L
708005 AlteTube Ice pan with lid, medium 4L
53
AltemisLab™ product customisation
AltemisLab™ support With you beyond your purchase...
AltemisLab has the ability to develop and manufacture custom products to meet your individual requirements.
Custom products are always assigned a unique and dedicated part number, ensuring a seamless ordering process.
Specific barcodes, different coloured caps, customer branding, and different equipment configurations, the possibilities for customisation are not limited.
AltemisLab will remain your reliable partner. You can depend on our experienced team to support you and your products.
We provide expert installation, training, preventative maintenance and on-going service packages.
54
TD04
19N
55
Vanilla HouseCopley Hill Business ParkBabrahamCambridge CB22 3GNUnited Kingdom
[email protected]+44 (0) 1223 344900
www.altemislab.com
A higher standard in every way