Salvagnini Tooling - SM TECH Tool - Catalog scule pentru centre de... · Salvagnini Tooling...
-
Upload
truongdang -
Category
Documents
-
view
214 -
download
1
Transcript of Salvagnini Tooling - SM TECH Tool - Catalog scule pentru centre de... · Salvagnini Tooling...
Strength. Performance. Innovation.
Salvagnini Tooling
Distribuitor: S.C. SM TECH S.R.L. www.sm-tech.ro www.wilsontool.rooffice @ sm-tech.ro Tel: 0374-991480Tel mob: 0745-528494Fax: 0374-091010CATALOG SCULE PENTRU CENTRE DE STANTAT SALVAGNINI
2
Type of Shear BenefiT LimiTaTion
rooftopBest shear for punching at maximum tonnages.
When nibbling, bite must be 75% of punch dimension or excessive side loading will result.
Concave or Double Concave
Best shear for nibbling because it inverts stresses.
The punch is less resistant to breakage when punching at high tonnages because of inverted stresses.
inverted rooftopAlso good shear for nibbling because it inverts stresses.
More susceptible to breakage because of a sharp focal point for stresses - use great care.
Double Valley Shear
Best shear for nibbling when shape is long and narrow.
The punch is less resistant to breakage when punching at high tonnages because of inverted stresses.
JK ShearA special punch tip shear that allows you to punch high strength materials with a reduced risk of breakage.
Can only be used on punches up to 25.4mm diameter or ‘A’ dimension†.
UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
opTima® coating provides significantly longer tool life, more hits between sharpenings, reduced galling, better performance and less downtime. With a surface hardness of 95 Rockwell C, Optima far exceeds the hardness levels that can be achieved with conventional tool steels. It resists galling in stainless and galvanized steel and is unaffected by sharpening.
Wear-BeaTer™ coating is a titanium nitride (TiN) coating that helps reduce galling and extends punch life in certain applications.
SLip-max™ coating’s combination of hardness and lubricity greatly increases punch life and reduces galling when piercing aluminum. Slip-Max is also very effective in resolving even the most challenging stripping problems with punching or forming stainless steel and aluminum.
CoaTinG opTionS
Shear opTionS
SHEAR OPTIONS ANd COATINGS
3
heaD poSiTion TooL Type STaTion SiZe ranGe noTeS
1 - 20 and 41 - 76 [7 Tons]
WPA 33 mm 0.79 - 6 mm Round OnlyWP0 33 mm 0.79 - 10 mm Fully GuidedWPB 33 mm 6 - 10.5 mm Round OnlyWP9 33 mm Up to 26 mm Fully GuidedWS4 33 mm Up to 33 mm
30 - 35[12 Tons]
WP5 60 mm Up to 42.4 mm RotationalWS6 60 mm Up to 60 mm Rotational
21 - 24[26 Tons]
WS8 70 x 90 mm 70 x 90 mm Type 70WS9 70 x 90 mm 70 x 90 mm Type 90WSA 90 x 90 mm 90 x 90 mm Type 90
Wilson Tool types are compatable with Salvagnini S4, S6, S8, S9, SA, P0, P9, P5 and Mate tool types PA and PB
0o
90o
180o
270o
UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
TooLinG oVerVieW
TooLinG orienTaTion
Note: Please refer to non-standard key locations by the following method: • Example 1 “Shape at 30˚”• Example 2 “Shape at 60˚”
TOOLING OVERVIEW ANd TOOL ORIENTATION
example 1 example 2
WORK HOLDERS
FRONT OF PRESS
180O 0O
270O
90O
30O
180O 0O
270O
90O
60O
STanDarD Shape Die VieW
4
24
23
22
21
90 x 90
70 x 90
70 x 90
90 x 90
30 31 32 33 34 3576 68 60 56 52 48 44
75 67 59 55 51 47 43
74 66 58 54 50 46 42
73 65 57 53 49 45 41
72 64 20 16 12 8 4
71 63 19 15 11 7 3
70 62 18 14 10 6 2
69 61 17 13 9 5 1
Wpa WpB WS4
0o
90o
180o
270o
DeSCripTion Wpa0.79 - 6 mm priCe WpB
6 - 10.5 mm priCe
punch holder w/Locking Screw 17610 17612punch Locking Screw 25212 25212punch - Round 17611 17613optima add-onStripper - Round 17502 17502Die - Round 17716 17716Die - Round Slug Hugger® 2 17718 17718Die Shim pack* 17602 17602
DeSCripTion WS4Up to 33 mm priCe
punch - Round 17500punch - Shape 17501optima add-onStripper - Round 17502Stripper - Shape 17503Die - Round [0 - 10.5 mm] 17716Die - Round [10.5 - 33 mm] 17504Die - Round Slug Hugger® 2 [0 - 10.5 mm] 17718Die - Round Slug Hugger® 2 [10.5 - 33 mm] 17604Die - Shape [0 - 10.5 mm] 17717Die - Shape [10.5 - 33 mm] 17505Die - Shape Slug Hugger® 2 [0 - 10.5 mm] 17719Die - Shape Slug Hugger® 2 [10.5 - 33 mm] 17605Die Shim pack* 17602
UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
* Die Shim Pack includes: 5 each 0.1 mm 3 each 0.2 mm 2 each 0.3 mm
Grind Life for Wpa, WpB, WS4:Punches can be resharpened 4 mmDies can be resharpened 1.5 mm
33MM PUNCH, STRIPPER ANd dIE33
MM
PU
NC
H, S
TRIP
PE
R A
ND
DIE
heaD poSiTionS 1-20, 41-76 7 Ton
h3 heaD
STanDarD Shape Die VieW
5
24
23
22
21
90 x 90
70 x 90
70 x 90
90 x 90
30 31 32 33 34 3576 68 60 56 52 48 44
75 67 59 55 51 47 43
74 66 58 54 50 46 42
73 65 57 53 49 45 41
72 64 20 16 12 8 4
71 63 19 15 11 7 3
70 62 18 14 10 6 2
69 61 17 13 9 5 1
0o
90o
180o
270o
12
3
4
5
6
7
8
9
10
Wp0 Wp9
DeSCripTion Wp9 Up to 26 mm priCe
punch assembly - Round 17529punch assembly - Shape 17521punch - Round 17522punch - Shape 17523optima® add-onStripping Guide - Round 17524Stripping Guide - Shape 17525Die - Round [0 - 10.5 mm] 17716Die - Round [10.5 - 33 mm] 17504Die - Round Slug Hugger® 2 [0 - 10.5 mm] 17718Die - Round Slug Hugger® 2 [10.5 - 33 mm] 17604Die - Shape [0 - 10.5 mm] 17717Die - Shape [10.5 - 33 mm] 17505Die - Shape Slug Hugger® 2 [0 - 10.5 mm] 17719Die - Shape Slug Hugger® 2 [10.5 - 33 mm] 17605Die Shim pack* 176026 punch holder 175267 Socket head Cap Screw 64168 retaining ring 175289 Spring 624110 Spring Support Washer 17527
DeSCripTion Wp0 0.79 - 10 mm priCe
punch assembly - Round 17510punch assembly - Shape 17511punch - Round 17512punch - Shape 17513optima add-onStripping Guide - Round 17514Stripping Guide - Shape 17515Die - Round 17716Die - Round Slug Hugger® 2 17718Die - Shape 17717Die - Shape Slug Hugger® 2 17719Die Shim pack* 176021 punch holder - Round 175162 punch holder - Shaped 175173 Socket head Cap Screw 64094 Spring 9806445 retaining ring 980572
UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
* Die Shim Pack includes: 5 each 0.1 mm 3 each 0.2 mm 2 each 0.3 mm
Grind Life for Wp0 Grind Life for Wp9Punches can be resharpened 1.5 mm 3 mmDies can be resharpened 1.5 mm 1.5 mm
FULLY GUIdEd PERFORATING ASSEMBLY 33MM 33M
M FU
LLY G
UID
ED
AS
SE
MB
LY
heaD poSiTionS 1-20, 41-76 7 Ton
h3 heaD
STanDarD Shape Die VieW
6
24
23
22
21
90 x 90
70 x 90
70 x 90
90 x 90
30 31 32 33 34 3576 68 60 56 52 48 44
75 67 59 55 51 47 43
74 66 58 54 50 46 42
73 65 57 53 49 45 41
72 64 20 16 12 8 4
71 63 19 15 11 7 3
70 62 18 14 10 6 2
69 61 17 13 9 5 1
0o
90o
180o
270o
Wp5 WS6
DeSCripTion Wp5Up to 42.4 mm priCe WS6
Up to 60 mm priCe
punch - Round 17532 17542punch - Shape 17533 17543optima® add-onStripper - Round 17534 17544Stripper - Shape 17535 17545Die - Round 17536 17536Die - Round Slug Hugger® 2 17636 17636Die - Shape 17537 17537Die - Shape Slug Hugger® 2 17637 17637Die Brush 8mm 17601 17601
UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
60MM PUNCH, STRIPPER ANd dIE
heaD poSiTionS 30 - 35 12 Ton
* Dies come with brushes installed.
Grind Life for Wp5, WS6:Punches can be resharpened 4 mmDies can be resharpened 1.5 mm
60M
M P
UN
CH
, STR
IPP
ER
AN
D D
IE
h3 heaD
STanDarD Shape Die VieW
FRONT OF PRESS
WORK HOLDERS
X or 0o
Y or 90o
7
WS8
0o
90o
180o
270o
24
23
22
21
70 x 90
70 x 90
70 x 90
70 x 90
30 31 32 33 34 3576 68 60 56 52 48 44
75 67 59 55 51 47 43
74 66 58 54 50 46 42
73 65 57 53 49 45 41
72 64 20 16 12 8 4
71 63 19 15 11 7 3
70 62 18 14 10 6 2
69 61 17 13 9 5 1
Type 70WS8
70 x 90 mm priCe
Type 70punch - Round 17562punch - Shapes 17563optima® add-onStripper - Round 17564Stripper - Shapes 17565Die - Round 17566Die - Round Slug Hugger® 2 17666Die - Shape 17567Die - Shape Slug Hugger® 2 17667Large Brush 13 mm 17600
UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
PUNCH, STRIPPER ANd dIE LARGE STATION
Verify what stations are in the cartridge.
heaD poSiTionS 21-24 26 Ton
* Die and Strippers come with brushes installed.
Grind Life for WS8Punches can be resharpened 4 mmDies can be resharpened 1.5 mm
Slug retention options available upon request.
LAR
GE
STATIO
N P
UN
CH
, STR
IPP
ER
AN
D D
IE
Type 70
Type 70
STanDarD Shape Die VieW
8
WS9
0o
90o
180o
270o
24
23
22
21
90 x 90
70 x 90
70 x 90
90 x 90
30 31 32 33 34 3576 68 60 56 52 48 44
75 67 59 55 51 47 43
74 66 58 54 50 46 42
73 65 57 53 49 45 41
72 64 20 16 12 8 4
71 63 19 15 11 7 3
70 62 18 14 10 6 2
69 61 17 13 9 5 1
DeSCripTionWS9
70 x 90 mm priCeWSa
90 x 90 mm priCe
Type 90 Type 90punch - Round 17562m] 17582punch - Shapes 17563 17583optima® add-onStripper - Round 17574 17584Stripper - Shapes 17575 17585Die - Round 17576 17586Die - Round Slug Hugger® 2 17676 17686Die - Shape 17577 17587Die - Shape Slug Hugger® 2 17677 17687Large Brush 13 mm 17600 17600
WSa
UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
PUNCH, STRIPPER ANd dIE LARGE STATION
Verify what stations are in the cartridge.
heaD poSiTionS 21-24 26 Ton
* Die and Strippers come with brushes installed.
Grind Life for WS9 & WSaPunches can be resharpened 4 mmDies can be resharpened 1.5 mm
Slug retention options available upon request.
LA
RG
E S
TATIO
N P
UN
CH
, S
TR
IPP
ER
AN
d d
IE
Type 90
70 x 90
Type 90
90 x 90
STanDarD Shape Die VieW
Type 90
9
S1 S3 -S3A S4 S7 S8
S9 S23 S51
S59 S65 S69 S81
S95W
3
14
2
1
2
1
3
(S3A)
(S3)
2
1
3
4 3
2
1
2
1
2
1
3
4
7
6
5
4
1
2
3
1
4
6
2
5
3
3
2
1
5
4
1
3
4
2
5 2
3
1
4
2
3
1
4
2
3
1
S95L
21
3
60˚
2
3
1
S50
S103 S105
3
2
1
4
1
3
2 5
7
46
S97
32
4 Flat
1
5
34
1
2
5
S100 S102
1
3(To Sharp)
2
6
5
7 4
6
25
3
1
47
S23A
UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
SPECIAL SHAPES
Note: Special Considerations May Alter Price and Lead Time
Group “a”
SP
EC
IAL S
HA
PES
10
2
1
3
4
2
1
3
S124
S106 S108 S109 S110
S161 S162
3
4
5
1
2
4
1
2
3
5
6
1
2
3 1 4
36
5
2
1
24 7
3
5 6
8
1
34
2 5
6
34
6
5
2
1
S122
S163
1
2
3
S121
1
2
S123
S164 S165
3 4
2
1
3
52
1
6
4
7
S170�
2
1
34
1DIA
3
2
4RAD(2X)
5RAD(4X)
S167
3
2
1
7
6
54
S166
2
53
4
1
PN
2
1
RTF
5
6
1
24
3
SQF
1
2
3 4
5
UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
SPECIAL SHAPES
Group “a”
SP
EC
IAL
SH
AP
ES
4 QTY OF SIDES
4 QTY OF SIDES
3 QTY OF SIDES
11
3
2
1
S6
1
2
34
5
S10
1
4
3
2
5
S11
1
3
2
45
7
S12
3
1
24
S13
S14
1
45
2
3
S15
1
2
3
4
5
S16
1
2
3
4
S17
2
3
4
1
S18
5RAD(8X)
3RAD(4X)
4(4X)
2
S19
3 1
42
6 7
5
S20
3
4
2 1
S21
12
4
3
5
6
S22
2
1
5
3
4
7
6
S24
1
25
6
3 4
S30
1
3RAD
4RAD(2X)
2DIA
1
4
2
3
5
6
S31
1
4
23
5
6
S33
2
3RAD(4X) 2
4RAD(8X)
S19A
23
RAD(4X) 2
4RAD(8X)
S19B
UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
SPECIAL SHAPES
Group “B”
SP
EC
IAL S
HA
PE
S
6 QTY OF TABS (2)
12
98
6
4
7
23
5
1
S35
DIM 1
DIM 2
DIM 4
DIM 3
DIM 5
DIM 6
DIM 8(4X)
DIM 7
S37
1
3 7
4
5
8
6
2
S36
1
2
3
7
64
5
S40
1
2
4
3
5
6
S41
1
6
2
4
5
3
S42
3
2
4
1
5
S43
2
7
1
3
4
5
698
S46
2
1
4
3
3
4
5
2
1 5RAD(2X)
4RAD(2X)
3
6
2DIA
1
S57
2
5
43
1
S58
5RAD(4X)
1
2
3
4
S54
S55 S56
S36A
3RAD
5RAD
6RAD7
RAD
8RAD
4RAD
1
2
6
1
2
3
4
7
5
S60
4RAD(2X)
5RAD(4X)
1
2
3
S62
1 4
2
3
5
S66
3
5
42
1
S61
2
1
45
6
3
S79 S82
UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
SPECIAL SHAPES
Group “B”
SP
EC
IAL
SH
AP
ES
6 QTY OF SLOTS6 QTY OF TABS
13
2
13
S87
2
1
4
3
6
5
S88
2
3
14
S91
2
1
45
3
6
S93
6
3(TS)
4
5
1
2
8
9
7S114 S115
3
5
42
1
S116
31
2
S117
243
1
1
5
3
2
4
89
7
6
3
21
25
1
4
3
S120 S125 S126
25
3
14
S127
2
3
4
1
S141 S142
5
4
2
1
3
S119
3RAD
5RAD(4X)
2
4
1
6RAD(TYP)
5RAD(TYP)
1DIA
2
4 3
S128
3
2
1
S118
S141A
4RAD(4X)
3RAD
2
1
4
3
5
1
2
1
2
S83
1
3
2
46
5
S84
UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Group “B”
SPECIAL SHAPESS
PE
CIA
L SH
AP
ES
6 QTY OF SLOTS
5 QTY OF LOBES
6 QTY OF LOBES 4 QTY OF ENDS
4 QTY OF TIPS
6 QTY OF TABS
6 QTY OF TABS
7 QTY OF SLOTS
6 QTY OF LOBES
14
4RAD
1DIA
23
1211
13RAD
15(2X)
14RAD(8X)
7RAD
5616
(2X)
98
10RAD
5
34
2
1213
141
11109
177615
8 16
S168
1
2
43
7(TYP)
5
8
6
S169
2
1
5
4
3
S171
1
3
4
25
S172
3RAD
4RAD
5RAD(4X)
1
2
6
S174 S176
1
5
2
3
DIA
4
S177
4
5
3
12
S179
UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
Group “B”
Group “C”
SPECIAL SHAPESS
PE
CIA
L S
HA
PE
S
4 QTY OF TABS
15UK Tel (Free): 0800 373 748Ireland Tel (Free): 1-800 709 009
Fax (Free): 0800 373 758Fax (Free): 1-800 535 538
email: [email protected]
orDer Minimum order is
CreDiT requiremenTS All orders are subject to approval by our Credit Department. If you are a new account, please furnish us with your tax exempt status, a bank reference, three current supplier references and/or your current D&B rating with your first order. A credit limit will be imposed on new accounts until credit has been established.
paymenT TermS Terms are net 10 days. Catalog prices are subject to change without notice.
freiGhT Orders are shipped F.O.B. from our manufacturing facility.(International Shipments are Incoterms: Ex Works).
orDer CanCeLLaTion In the event an order is cancelled, an additional charge will be assessed to cover the cost of labor and material.
reTurneD maTeriaL A handling/restocking fee will be applied to all standard products returned for credit. A return authorization number and shipping instructions must be obtained in advance before an item can be returned.
CLaimS All claims or product shortages must be made within 30 days of the invoice date.
WORLD HEADQUARTERS
Wilson Tool International - United StatesTel (Free): 800-328-9646 | Tel: 651-286-6001 Fax (Free): 800-222-0002 | Fax: 651-286-5959 Email: [email protected]
NORTH AMERICA
Wilson Tool - CanadaPunching and Stamping Division Tel: 800-268-5573 | Fax: 800-668-9314 Email: [email protected]
Wilson Tool - CanadaPress Brake Division Tel: 905-840-2240 | Fax: 905-840-1032 Email: [email protected]
Wilson Tool - MexicoTel: 52 (81) 8865-4820 | Fax: 52 (81) 8865-4599 Email: [email protected]
SOUTH AMERICA
Wilson Tool - ArgentinaTel: +54 114 7996519 Email: [email protected]
Milling Ferramentas - BrazilTel/Fax: 55 11 5621-2100 Email: [email protected]
CHINA / PACIFIC RIM
Wilson Tool - ChinaTel: +86 21 51089638 | Fax: +86 21 64422195 Email: [email protected]
EUROPE / MIDDLE EAST / AFRICA
Wilson Tool - United KingdomTel (Free): 0800-373748 | Tel: +44 1793 831818 Fax (Free): 0800-373758 | Fax: +44 1793 831945 or 46 Email: [email protected]
Wilson Tool - GermanyTel (Free): 00800-9457668665 | Tel: +49 5723 747 0 Fax (Free): 00800-945766329 | Fax: +49 5723 747 10 Email: [email protected]
Wilson Tool - DenmarkTel (Free): 80 20 20 24 | Tel: +45 44 53 1699 Fax (Free): 80 20 20 26 | Fax: +45 44 53 0607 Email: [email protected]
Wilson Tool - FranceTel: +33 (0) 164 13 47 80 | Fax: +33 (0) 164 13 47 81 Email: [email protected]
Toolspress - ItalyTel: +39 0521 850510 / 850677 Fax: +39 0521 850796 Email: [email protected]
OctOber 2016
Distribuitor Romania: S.C. SM TECH S.R.L. www.sm-tech.ro www.wilsontool.rooffice @ sm-tech.ro Tel: 0374-991480Tel mob: 0745-528494Fax: 0374-091010