Salsnes Filter Overview Salsnes Separation ( S.A.) Pty Ltd Devlyn Fraser.
-
Upload
geoffrey-rone -
Category
Documents
-
view
216 -
download
0
Transcript of Salsnes Filter Overview Salsnes Separation ( S.A.) Pty Ltd Devlyn Fraser.
Salsnes Filter OverviewSalsnes Filter Overview
Salsnes Separation ( S.A.) Pty Ltd
Devlyn Fraser
Product IntroductionProduct Introduction
The purpose of the Salsnes Filter
1) Separation & dewatering of solids, leading to the reduction of the (TSS) Total Suspended Solids in municipal effluent
2) Separation & dewatering of solids in Industrial effluent, with the aim of lowering the SS, COD and BOD, effectively lowering effluent billing costs, as well as possible reductions in operations & maintenance costs.
Technical OverviewTechnical Overview
2 Models, SF 2000 & SF 6000 Manufactured in 304 & 316 S/Steel Hydraulic loading of 70- 575 m³ / Hr Endless Cloth Filter, Woven Polyester, 0.1- 1.0
mm pores (785 Microns Thick) 40-70 % removal of suspended solids The cake (dewatered Sludge) 25-45 % Dry
substrate Weight : 375 Kg (SF2000)725 Kg (SF6000) Energy Consumption: 2.5 Kw (SF2000)
4.2 Kw (SF6000)
Process Description Process Description
Effluent inflow through inlet tube Effluent filtered through an endless Filter Cloth Removal of 40-70% of suspended solids The filtered water is released through outlet-pipe Suspended solids are conveyed by filter cloth &
dumped into a sludge compartment Excess sludge removed from cloth by an Air knife Primary Sludge dewatering is facilitated by
gravity during transport of the sludge to the trough
Process DescriptionProcess Description
Secondary dewatering of sludge is facilitated by screw press compacting the sludge in the press cylinder
a) Excess water is drained via secondary outlet
Compressed, dewatered sludge (cake) is released via a spring loaded lid on the press cylinder
Excess Fat deposits are removed from cloth twice per day via Hot water spray (20 Ltrs Each) - Adjustable
On/Off & operating speed is controlled by pressure transmitter, measuring the level of inflow, to achieve optimal balance between inflow & the filters filtration properties
Process is completely automated, incl. Cleaning = minimal maintenance
ApplicationsApplicationsA) Overview of Expanded process at Municipal : WWTP’S
PST
Solids (underflow) Water (Overflow)
DIGESTOR AERATION BASIN Digested Sludge Biological treatment
Supplies O2 to Microbes
Microbes eat organics,
1. Belt Press pathogens & bacteria
2. Irrigated to Land 3.Composted 4.Dewatered - Incinerated Overflow
CLARIFIER Chlorine GasClean disposable water Ponds Rivers Industries
Underflow Activated Sludge Biologically active
Waste activated Sludge Activated SludgeReturned to Aeration basinto balance Microbe population
Sludge returned to digestor Drying beds Co-Digesting Mechanical dewatering
Irrigation to land
Applications Cont.Applications Cont.
Salsnes Filter removes SS in parallel to PST, possibly allowing decommissioning of the digester.
Sludge cake to be stabilised (composted) & sent to landfill or other
Alternately sludge must not be compressed & dewatered, & sent to digester to neutralise biological activity.
Installation Options - WWTPInstallation Options - WWTP
Relieve overloaded capacity – SF installed prior to PST
SF installed after PST to reduce loading on aeration basins
SF installed parallel with PST, tapping back to aeration basins, removing excess flow rates from PST
Reduce wear, maintenance & re-furbishment costs on pumps, if installed prior to pump to remove abrasive materials
Applications to avoid in WWTPApplications to avoid in WWTP
Do not install SF after PST on the digester feed line, SF not able to deal with digested sludge.
Do not load SF with sludge treated with Flocculants (polymers), possible application for very limited flocculant dosing may be acceptable.
Industrial ApplicationsIndustrial Applications The following are possible applications for SF:
Sugar Mills- Juice filtration Tanning Processes Paper Mills Canneries Fish, Poultry food processors and Abattoirs Fruit Juice Processing Biofuel Processes Breweries Screening Before Reverse Osmosis – Desalinisation Animal Feed Manufacturers Grain based industries
Industrial Applications Cont.Industrial Applications Cont.
It is imperative that the SF does not be considered as a means of removing Grit (Sand) from Effluent.
The SF is able to contend with approximately 10% Grit in Effluent.
One must bear in mind that the higher the Grit Loading in the Effluent, the higher the wear and maintenance costs of the SF will be.
SF Benefits - Industrial Processes SF Benefits - Industrial Processes
Reduced effluent SS, COD, BOD, Efficiently Reducing Effluent Billing Costs.
Recovery of some Protein content in SS for Re-processing
in the Rendering Process that may have income generating benefits.
The refining of Sugar cane and Fruit Juice Extracts, including the recovery of SS for further processing.
The recovery of Paper Fiber for Reprocessing.
SF Features – Benefiting SF Features – Benefiting Industry and WWTP’sIndustry and WWTP’s No Chemicals
Negliable Water Consumption
Recovers and Dewaters Sludge in Combined Process
Outstanding Results : 40 – 70 % SS Removal • 25 – 45 % Dry Substrate
Low Maintenance Costs
Easy Repair and Maintenance Procedure
SF Features – Cont.SF Features – Cont.
Low Power Consumption and Running Costs
Self Cleaning – Automated
Level Sensor Controls Speed and Optimises SF Filtering Performance at various flow Rates – All Automated.
Exceptional After Sales Service and Back Up
Compact Design – More Placement Options
Compact and Light – Easily Maneuverable
SF Features – Cont.SF Features – Cont.
Refined for South African Applications
Globally Recognised, Approved and Industry Proven
Recovery of SS for re-processing if required
Substantial Effluent Billing Cost Saving = Feasible Payback Term
PHOTO’SPHOTO’S
PHOTO’SPHOTO’S
PHOTO’SPHOTO’S
PHOTO’SPHOTO’S
*THE END !*THE END !