SALICE | Titanium USA€¦ · Silentia 100 Series soft close Hinges with integrated soft-close...
-
Upload
duongduong -
Category
Documents
-
view
219 -
download
1
Transcript of SALICE | Titanium USA€¦ · Silentia 100 Series soft close Hinges with integrated soft-close...
Silentia 100 Series soft close
Hinges with integrated soft-closemechanism in the hinge cup.
Hinges for doors 15 mm min. thickness.
TitaniumElegance & Function
Titanium finish perfectly integrates the hinge into the design of the cabinet conveying a sensation of warmth while at the same time, incorporating modern functionality.The color, new and different compared to the traditional blued or nickel-plated finishes, is less invasive and has a muted sheen. The Titanium appearance makes the hinge ideal in combination with darker interiors and with the numerous shades of exotic wood finishes used in contemporary cabinetry.Corrosion resistance is greatly enhanced compared to the traditional nickel-plated finishes.In keeping with today’s trends, this elegant Titanium finish is now available on both the standard hinge series as well as the Silentia, soft close products.
ø35
12 45 ø35
K
9.5ø8
45 ø35
K
9.5
R P
The required cup depth must be maintained for correct operation of the hinge.
C1_7AD6Full overlay - 94°
C1_7GD6Half overlay - 94°
C1_6AD6Full overlay - 105°
C1_6DD61/2” Overlay - Face frame - 105°
C1_6GD6Half overlay - 105°
C1_6PD6Inset - 105°
C1_6ND6ACInset Blind corner
C1_6MD6ACCorner hinge +45°
Silentia Special angle and zero protrusion soft close
Hinges with integrated soft-closemechanism in the hinge cup.
ø35
13.5 45 ø35
K
9.5ø8
45 ø35
K
9.5
R P
The required cup depth must be maintainedfor correct operation of the hinge.
C7_6PD6Inset - 94°
C7_6ED6+30°
C7_6ZD6+15°
C7_6WD6-30°
C7_6MD6ACCorner hinge +45°
C7R6ND6ACInset blind corner
C7R6ND6AMOverlay blind corner
2
C2_MAD6Full overlay “0 Protrusion” 155°
Hinges with integrated soft-close mechanism in the hinge cup.
Hinges for doors of 15 mm min. thickness.
The required cup depth must be maintained for correct operation of the hinge.
Silentia 200 Series soft close for thick doors up to 1-1/4” (32 mm)
Hinges with integrated soft-closemechanism in the hinge cup.
45 ø35
K
9.5ø8
45 ø35
K
9.5
R P
The required cup depth must be maintained for correct operationof the hinge.
C2_BAD6Full overlay - 94°
C2_BGD6Half overlay - 94°
C2_BPD6Full overlay - 105°
C2_KAD6Full overlay “0 Protrusion” 155°
200 Series Self close
15.5
ø35
45 ø35
K
9.5ø8
45 ø35
K
9.5
R P
C2_6A66Full overlay 110°
C2_6D661/2” Overlay - Face frame 110°
C2_6G66Half overlay - 110°
C2_6P66Inset 110°
11
C2_BN66ACInset blind corner
C2_BM66ACCorner hinge +45°
C2_YA66Pie corner hinge
8
C2_KA66Full overlay “0 Protrusion” 155°
C2_FA66Full overlay “0 Protrusion” 155°
3
200 Series Self close for thick doors up to 1-1/4” (32 mm)
45 ø35
K
9.5ø8
45 ø35
K
9.5
R P
C2_BA66Full overlay 94°
C2_BG66Half Overlay - Face frame 94°
C2_BP66Inset 94°
11
F Series self close - For thick doors up to 1- 1/2˝ and other special applications
For heavy thick doors (inset up to40 mm) or overlays up to 34 mm.Also, the hinge of choice for pocketdoor applications.
K = 3 to 15 mm.
45 ø40
K
9.5
A
CFA7A66Full overlay 94°
CFA7G66Half Overlay - Face frame 94°
CFA7P66Inset 94°
11
M Series 270 degree institutional hinge: Grade 1
Ideal for the most commercial applications, where high stability, strength and endurance are required.They are certified for applications in public environments in conformity ANSI Grade 1 and FIRA Level 5 requirements.
R P
CM_3A66Full overlay 94°
S
1
R
T
12ø 35
10.5
13
Titanium
4
Wood Screw Euro screwBAR3R06 = 0 mmBAR3R26 = 2 mmBAR3R36 = 3 mmBAR3R66 = 6 mmBAR3RC6 = 12 mmBAR3RV6 = 18 mm
BARGR26/16 = 2 mmBARGRC6/16 = 12 mmBARGRV6/16 = 18 mm
BAPGR26/16 = 2 mm
Hinge mounting plates
37
32ø5
37
32
Face frame mounting plates
BAU3R16 = 1 mmBAU3R46 = 4 mm
S2BX83H6Hinge arm cover
V136X156Pozi drive6 mm x 14,5 mm • Euro screws15/64” x 37/64”
S2XX85H6Hinge flange cover
V234X166Pozi drive4 mm x 16 mm • Wood screws5/32” x 5/8”
Accessories
21 32
S
Ø5 11
Wood Screw BAP3R06 = 0 mm
21 32
S
Euro screw
Wood Screw
48
10
V284X116 Pozi drive4 mm x 11 mm • Dowel screw5/32 x 7/16”
D2A7XCXCPThe #2 Pozi driver is for use on all adjustment screws and and Pozi drive attachment screws
5
Silentia Face frame
Hinges with integrated soft-closemechanism in the hinge cup.
Hinges for doors 14 mm min. thickness. The required cup depth must be
maintained for correct operation of the hinge.
CU_37D61/2” overlay, 2 cams
CU_3AD61 - 1/4” overlay, 2 cams
CU_3BD61 - 5/16” overlay, 2 cams
CU_37D6R1/2” overlay, 3 cams
CU_35D6R5/8” overlay, 3 cams
CU_3AD6R1 - 1/4” overlay, 3 cams
45 ø35
K
9.5ø8
45 ø35
K
9.5
R P
SUXX83C6Hinge arm coverfor partial overlay hinges
SUXX83L6Hinge arm coverfor full overlay hinges
SUP337XGAngle reduction clip
K=2.5mm - 6mm
Attach to face frame using (1) #8 x 3/4” Phillips modified truss head screw - VU74X194
Attach to face frame using (2) POZI drive #6 x 5/8” Titanium wood screws: # V234X166
Titanium
6
S Series Face frame hinges
Hinges for doors 14 mm min. thickness.
CS_37661/2” overlay, 2 cams
CS_3A66N1-1/4” overlay, 2 cams
CS_3766XR1/2” overlay, 3 cams
CS_3566XR5/8” overlay, 3 cams
CS_3466XR3/4” overlay, 3 cams
45 ø35
K
9.5ø8
45 ø35
K
9.5
R PK = 2.5 mm
CS_3266NR1” overlay, 3 cams
CS_3A66NR1-1/4” overlay, 3 cams
Attach to face frame using (1) #8 x 3/4” Phillips modified truss head screw - VU74X194
Attach to face frame using (2) POZI drive #6 x 5/8” Titanium woodscrews: # V234X166
Attach to face frame using (2) POZI drive #6 x 5/8” Titanium wood screws: # V234X166
SSXX83Hinge flange cover
11
SSP3377GAngle reduction clip1/2”, 5/8” & 3/4”
SSP337AGAngle reduction clip1” & 1-1/4”
7
We reserve all rights to this catalogue under copyright law. It shall not be permissible to duplicate this catalogue in any form either in whole or in part without our written consent. The technical specifications in this catalogue as photographs and drawings are not binding.
SALICE AMERICA INC.
2123 CROWN CENTRE DRIVECHARLOTTE NC. 28227TEL.704 8417810 - 1800 222 9652FAX 704 [email protected]
Ed.
02
- 0
3/2
01
7