Sales Training Outline 2006 Klaus Tum Product Manager Foot Switches 35 Royal Road Flemington, NJ...
-
Upload
brian-neal -
Category
Documents
-
view
221 -
download
2
Transcript of Sales Training Outline 2006 Klaus Tum Product Manager Foot Switches 35 Royal Road Flemington, NJ...
Sales Training Outline 2006
Klaus TumProduct Manager
Foot Switches
35 Royal RoadFlemington, NJ 908-806-9400 www.altechcorp.com
• Electrical Engineer• 10 years with Altech Corporation• Product Manager of Circuit Breakers,
Busbars, Motor Disconnect Switches,Foot Switches, Sensors, Contactors,Motor Starters, Pin & Sleeve Connectors
Klaus Tum (short bio)
FM Series Foot Switches
• Small Size/High Quality• Light/Medium Duty Applications• Available in Gray, Black, or Off-White• Completely customizable with an infinite combination of cable
choices, connectors and configurations• 5 AMP, 250 VOLT AC electrical rating• Available in momentary and maintained configurations• Custom color pedals
PCFS-3M Series Foot Switches
• Compact size
• Black steel body, with or without guards
• Up to 10A, (1/2hp) / 125 VAC electrical rating
• Custom cables and connectors
• Low cost
• Made to compete with Treadlite series
FK Series Foot Switches
• Medium size• Available in Gray or Black• Higher electrical rating than FM Series• Up to 10 AMP, 250 Volt AC electrical rating• Custom cables and connectors
FL Series Foot Switches
• Medium Size/Heavy Duty• Polyamide 6.6 body, pedal and cover• Resistant against water, oil and certain chemicals• 10 AMP, 500 Volt (20 AMP, 250 Volt) AC electrical ratings
FS Series Foot Switches
• Heavy Duty/Medium Size
• Die cast aluminum body and cover; polyamide 6.6 pedal
• Snap Action or slow make-break switch inserts
• 10 Amp, 500 Volt (20 Amp, 250 Volt) AC electrical ratings
• Standard colors: gray body, red cover, black pedal– Custom color are also available
FS Series Foot Switches
• One, two and three pedal models available• All models available with or without foot guards
Potentiometer Configuration
• Available in FL/FS series• Standard configuration includes
microswitch• Available with resistance from
100 OHM to 20K OHM (10K OHM standard)
Available Accessories
• Aluminum pedals• Foot guard• Anti trip
• Foot rests• Custom cables, connectors
Contact Configurations
• Momentary (Press to start - Release to stop)• Maintained (Press pedal and release, contacts
remain in the “on” position, press pedal again and release, contacts are in the “off” position)
• Two stage (First set of contacts close, when pedalis further depressed past pressure point, second contacts close)
IEC 601-1 for Medical Applications
• Protection Level IPX8 (Immersion in water)• Limited voltage rating to 25V~ (AC)/60V (DC)• UL/CSA, VDE approved switch insert• Installed cable with special pull/bend protection
strain relief• Special, modified housing• Available with FM, FL and FS Series Foot Switches