Sales Presentation - Vermeer Australia€¦ · Sales Presentation . Markets •Rental •Landscape...
Transcript of Sales Presentation - Vermeer Australia€¦ · Sales Presentation . Markets •Rental •Landscape...
BC700XL Sales Presentation
Markets
• Rental • Landscape • Startup tree contractors
Specifications • Length: 113” (287 cm) • Length-table down: 133” (337.8 cm) • Width: 71” (180.3 cm) • Height: 102” (259.1 cm) • Weight: 1800 lb (816.5 kg) • Kohler ECH740 25 hp (18.6 kW) EFI gas • Fuel tank: 6 gal (22.7 L) • Centrifugal clutch • Horizontal feed roller: 1 • Material capacity: 6” (15.2 cm) • Hydraulic tank capacity: 6.8 gal (25.7 L)
Features
• Centrifugal-style clutch • 25 hp (18.6 kW) Kohler EFI gas engine • Letterbox infeed opening • SmartFeed feed control • Electronic feed stop and
control bars • Wide axle • Large feedroller
Centrifugal-style clutch • Prevents belt slip on engagement • 1500 rpm engage point • Rated for 40+ hp (29.8 kW), tensioner retained to reduce shock
loading of engine and clutch • This system gives the customer the ability to run hydraulics
without the belt engaged so you can reverse wood out and troubleshoot at low idle
Engine • 25 hp (18.6 kW) Kohler EFI
Engine ECH740 • EFI saves on average 25% fuel
over carbureted engines • No carburetor which reduces
ethanol-induced problems • No choke = no flooding • Automatically adjusts for fuel
grade, fuel quality, temperature and altitude
• Kohler backs Command Pro EFI engines with a 3-year, unlimited-hour and labor warranty
Letterbox Infeed Opening
• 6” X 8” (15.2 X 20.3 cm) opening
• Rectangular opening provides ability to better process and feed tree forks compared to square openings
SmartFeed
SmartFeed is a patented feed-sensing control system which monitors engine rpm and automatically stops and reverses feed rollers when feeding larger, hardwood material.
Electronic Feed Stop and Control Bars
• Same components as on the larger chippers
• No linkage adjustment required
Wide Chassis and Axle
• Standard wide axle • Provides stability • Strong frame • Family look with the
BC900XL
Large Feed Roller
• 10” (25.4 cm) diameter • Climbs on limbs with
ease • Provides material
control
Specification Comparison Feature BC600XL BC700XL Infeed opening 6’ X 6’ (1.8 m X 1.8 m) 6’ X 8’ (1.8 m X 2.4 m) Engine 25 hp (18.6 kW)
carbureted Kohler Command Pro
25 hp (18.6 kW) EFI ECH740
Axle Standard or wide axle option
Wide axle standard
Feed roller 8” (20.3 cm) 10” (25.4 cm) Feedstop bar Manual Electronic Clutch Over-center belt idler Centrifugal
Vermeer Corporation reserves the right to make changes in engineering, design and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation.
Vermeer and the Vermeer logo are trademarks of Vermeer Corporation in the U.S. and/or other countries.
© 2013 Vermeer Corporation All Rights Reserved.