SAIL – Reaching out to Global Markets · 2016-03-03 · Steel Authority of India Limited (SAIL)...

SAIL – Reaching out to

Global Markets

Steel Authority of India Limited (SAIL) is India’slargest steelmaker and one of the world’s leadingsteel producer with an annual turnover of overUS$ 4 billion in 02-03. Annually it produces over10 million tonnes of various steel products, tomeet the exacting requirements of bothdomestic as well as overseas customers.

Its vision for the future, encompasses a presencein major markets of the world. Being amanufacturer of world-class steel products, SAILoffers to its customers a wide product profilematched with excellent service, and a choiceranging from widely traded items like Hot RolledCoils to specialty products like CRNOsteels. SAIL’s products have foundready acceptance in about

�� 75 countries the world over. Products exportedto various countries include Mild Steel Billets,Slabs, Wire rods, Structurals, Hot-rolled Plates/Coils/Sheets, Cold-rolled Coils/Sheets, Rails,CRNO Steels and Pig Iron.

SAIL’s Mild Steel and Pig Iron exports areundertaken by its International Trade Division(ITD) based in New Delhi.

��

A major exporter of steel products, Bhilai

produces 3.6 million tonnes of saleable steel

annually. The plant has the distinction of supplying

the widest and heaviest plates in India, besides

being the only established supplier of rails to the

Indian Railways. The plant has been regularly

supplying quality products to the foreign markets

for over two decades now and has earned the

goodwill of innumerable customers worldwide.

��

Rails, Structurals, Merchant products, Wire rods,

Re-bars, Plates, Billets, Slabs and Pig iron.

Pla

tes

�� Bhilai Steel Plant

�� !

ASTM A 36/ASME SA 36M 8 to 56 (*)BS-4360 Grade 43A/B 8 to 56JIS-G-3101-SS400DIN-17100 RST 37.20/ST 44.2BSEN 10025 S 275 JR/S235 JR/235 JR G2ASTMA 283 M/ASME SA 283 M Grade A/B/C/D 8 to 40JIS-G-3101-SS490AS3678 Grade 250�� "��#

ABS Grade A with ABS Certification 8 to 50.8LRS Grade A with Lloyds Certification 8 to 40LRS Grade B with Lloyds Certification 8 to 40$��

ASTM A 572 M Grade 42/50 Type 2JIS-G 3106 SM 490 ABSEN 10025 S 355 JR 8 to 32CAN/CSA-G40.21-M-92-300W/44w%��

�� 8 to 12 mm. : Maximum 15%Above 40 mm. : Maximum 8%

�� &��

For 8 mm. 2500 mm.Above 9 mm. upto 15 mm. 2500 to 2750 mm.Above 15 mm. upto 20 mm. 2000 to 2750 mm.Above 20 mm. 1500 to 2750 mm.Above 2750 upto 3200 mm. available in thickness range of 16-32 mm.�� 5000 to 12500 mm.(*) Small quantities in thickness above 56 mm. and upto 76 mm. (3”) can be considered on trialbasis.

�� : In bundles of 10-15 metric tonnes for plates upto 12 mm. thickness. In loosecondition for plates above 12 mm.

�� '��(��#�)� ��

� All plates shall be supplied in Killed quality (Si-Al Killed)� All plates are supplied in unnormalised, as rolled condition� Smaller sizes such as 4’x8’, 5’x10’, etc. can be supplied through flamecutting� Thickness above 40 mm. shall be supplied with gas cut edges on all sides and with relaxed tolerance on

flatness and waviness� Plates of 8 to 50 mm. thickness and upto 2500 mm. width in following grades can be supplied with

“U” marking and TUV certification; EN 10025 JR G2, S275 JR and S355 JR� High tensile grades can be supplied upto 10% of the total order. Exclusive orders in these grades are not

possible� Total no. of sizes : 25-30 for an order size of 5000 - 10000 metric tonnes� Invoicing : Theoretical weight basis� Inspection : Plant inspection� Port of Loading : Visakhapatnam, India� The above range is only indicative and certain thickness x width x length even within standard range

may not be possible for the mill� The above particulars are by way of general information only� Offers are subject to availability and confirmation of terms and conditions on case to case basis

}

}

��

Wir

e R

ods


��*�� +Diameter, � 5.5, 6.0, 7.0, 8.0, 10.0 mm.

�� a) JIS-G-3505

b) IS-7887-1992-Grade 3,4

c) JIS-G-3112-1991-SR-235

d) ASTM A 510 M-93 SAE-1010, SAE-1008,SAE-1010/SWR-14, SAE-1015

�� As per IS:1852 (85)

- Diameter +/-0.5mm.

- Ovality 0.65 mm.

'� � �� a) Coil outer diameter : 1250 mm.

b) Coil inner diameter : 950 mm.

c) Coil width : 500 mm.

)��&�� : 930 Kg approx.

�� Quadruple binding with signode strap on each Coil with identification tag

� (�� On actual weight basis

�� %��

"� ��# � 300 metric tonnes per size

�� Visakhapatnam, India

��&�� )��

Bill

ets


�� Twin Hearth, Ingot Casting

��*�� 100 x 100 x 6000 mm.,105 x 105 x 6000 mm.

�� With the following Chemical composition as per ladle sample analysis (*)

C : 0.17 - 0.23%

Mn : 0.50 - 0.90%

S&P : 0.05% - max each

Si : 0.10% max (Semi Killed)

(*) Restrictions within the specified ladle sample analysis can be agreed dependingon the availability

Note : Chemistry different from above may also be supplied after confirmationby us

��#�)� �� All billets shall be supplied in ‘As Rolled’ condition only

�� As per IS:2830/1992 with the following :

A) Tolerance on Dimension : +/- 2 mm.

B) Diagonal Difference : +5 mm. (max)

C) Tolerance on Length : +100/-400 mm.

�� Bare, strapped in bundles of 5 metric tonnes max.


�� %��

"� ��# � 1000 metric tonnes


��

��

India’s premier flat products plant produces 3.4 million

tonnes of saleable steel annually. Bokaro’s Hot and

Cold-rolled steels as well as its Galvanized products

have been acclaimed for their quality.

��

Hot-rolled Coils/Plates/Sheets, Cold-rolled

Sheets/Coils, Galvanised Sheets/Coils, CC Slabs

and Pig Iron.

GP

Coi

ls

�� Bokaro Steel Plant

�� ASTM A653M; JISG 3302 (1987) SGCC, SGCD-1; DIN 17162 ST 02

A) )�� : 120/180/200/220/275 gm/sq. mtr. Nominal on both sides

B) "��# : Chromated Regular Spangle, Continuously Hot Dipped,Lock Forming, Unoiled with Strip Edges cut at Pickling stage

C) �� Coil ID : 600 mm.'��(��# Coil Weight : 10 metric tonnes Max,)� �� without welding joint

Y.S. : 250 MPa Max.

UTS : 270-410 MPa

Hardness : 65 HRB max.

Works test certificate shall contain actual chemistry andLFQ conformity only

Staggered winding will be provided

While flatness is not measured, coils are stretch levelledwith 1.5-2% elongation to improve flatness

�� As per applicable ASTM specification

�� )� �� Coils are first wrapped with VCI paper followed by Polythene sheet. It is thencovered with HDPE and securely packed in metallic covering with eye rings

Edge protectors are fitted on the sides of the coils

Only Non-Wood Packing will be used

�� (�� Nett weight

��*��-"�#! � 0.50 mm. x 900 /1000 mm.0.63 - 1.6 mm. x 900 / 1000 / 1100 / 1225 mm.

�� On line, in ink, and comprising of “SAIL JYOTI” brand, coating, weight anddate of production etc.

�� )�� Size, Grade, Contract No., Coil No., & Gross Weight (incl. weight of packing)

� �� By Bokaro Steel Plant. Final inspection would be required by buyer at plantbefore despatch of materials

�� Haldia Port, India

$��'��( �� )��

��

HR

She

ets/

Plat

es


�� JIS G 3101 SS 400; JIS G 3132 SPHT 1/2; JIS G 3131 SPHC; EN 10025 S235 JR;S275 JR; DIN 17100 ST 37.2/ST 44.2; BS 4360 GR. 40/43A; ASTM A 36 / A569/A 570 GR 33/40; SAE 1008 - SAE 1018

��#�)� �� a) As rolled (through concast route), fully Aluminium Killed with Silicon contentof 0.04% Max. (optional), not further worked than Hot Rolled, Non-Clad,Non-Plated, Non-Coated, Unoiled, Unpickled, Unskinpassed, Mill EdgeCondition, and on the basis of metric system

b) No Temper pass facility is available

�� As per specific ordered and mutual agreement. For example typical+��.�� tolerance on thickness is 2/3 value of JISG 3193�� #,

�� Bare Packing in bundles of 7.5 metric tonnes max.

� (�� Based on actual net weight mentioned on the test certificate

��*�� !�&�� /!�&�� !�� /!��

+ !, + !, + !, + !, + !,

2 940 1,300 2,500 2,500

2.1-2.9 940 1,350 2,500 3,000

3.0-4.0 940 1,400 2,500 3,000

4.1-4.4 940 1,500 2,500 3,000

4.5-4.9 940 1,600 4,000 5,000

5.0-10.0 940 1,830 4,000 8,000

�� %��

"� ��# � Per Single Size : 100 metric tonnes


��$��-��

HR

Coi

ls


�� JISG 3101 SS 400; JISG 3132 SPHT 1/2; JISG 3131 SPHC; EN 10025S235 JR; S275 JR; DIN 17100 ST 37.2/ST 44.2; BS 4360 GR. 40/43A;ASTM A 36 / A 569/A 570 GR 33/40; SAE 1008 - SAE 1018 or equivalent.

��#�)� �� a) As rolled (through concast route), fully Aluminium Killed with Silicon contentof 0.04% max. (optional), not further worked than Hot Rolled, Non-Clad,Non-Plated, Non-Coated, Unoiled, Unpickled, Unskinpassed, Mill EdgeCondition, and on the basis of metric system.

b) Guarantee of “No Coil Break” is not available since the same depends ondecoiling practice at end user’s end as well.

c) No Temper Pass facility is available

d) Coils are handled in “Eye to the Sky” position at the mill and made EyeHorizontal after receipt at Haldia.

e) Coil I.D. - 850 mm. (33½”) (approx.)

f) Coil O.D. - 2300 mm. (90½”) max.

g) Width / Coil Weight :

&�� !+� �, )��&��

940-1100 (37” - 41”) 12-17

Above 1100 - 1250 (41”-49”) 14-21

Above 1250 - 1525 (48”-60”) 16-24

Above 1525 - 1600 (60”-63”) 17-25

Above 1600 - 1829 (63”-72”) 20-29

�� As per specific ordered and mutual agreement. For example typical+��.�� tolerance on thickness is 2/3 value of JISG 3193�� #,

�� Bare strapped with high tensile straps of minimum 3 numbers through the eyeand minimum 3 numbers across the circumference.

� (�� Based on actual net weight mentioned on the outer layer of the coil.

��*�� !�+� �, &�� !�+� �,

1.6 (0.063”) 940 - 1040 (37” - 41”)1.8 (0.071”) 940 - 1250 (37”-49”)2.0 (0.079”) 940 - 1320 (37”-52”)>2.0 - 2.9 (0.079” - 0.114”) 940 - 1420 (37”-56”)>2.9 - 4.0 (0.114” - 0.157”) 940 - 1600 (37”-63”)>4.0 - 16.0 (0.157” - 0.63”) 940 - 1829 (37”-72”)

�� Size/Grade/Coil No./Heat No./Net Wt./Contract No./Made in India

�� %�� A) Per single width and per grade : 1000 metric tonnes"� ��# B) Per single Thickness per width : 250 metric tonnes


��$��)��

CR

She

ets


�� DIN 1623 St 12.03; ASTM A 366; JISG 3141 (1990) SPCC-SD

��#�)� �� Annealed, Skin Passed, Dull Finish & Oiled, Aluminium Killed with Siliconas 0.04 % max.

��&�� 10 metric tonnes max.

�� As per specification ordered

�� )� �� Sheets will be covered with HDPE, second layer with metal envelope andedge protectors

�� (�� Actual nett weight on the packets

��*�� 0.50 - 0.60 mm. x 1000 mm. x 2000 mm. / 2500 mm.

0.70-2.00 mm. x 1000 mm. / 1250 mm. x 2000 mm. / 2500 mm.

�� Size, Grade, Contract No., Packet Number, Gross and Nett weight on eachpacket

� �� By Bokaro Steel Plant. Final inspection may be done by buyer at the plantbefore the despatch of materials to port if desired


��)��0��

��

CR

Coi

ls


�� DIN 1623 ST 12.03; ASTM A568/366; JIS G3141 SPCC CD;BS 1449 Pt. 1; IS 513 GR “O” or equivalent with Silicon content of0.04% maximum

��#�)� �� Annealed, Skin Passed, Matt Finish, Oiled, Mill Edges (Serration 2 mm. maximum).

��*�� &�� )��' �/� � �)��

+� � !, +� � !, +� � !, &��!�+� � �!,

0.5 to 0.63 900-1020 510/600 15

>0.63 to 0.8 Upto 1270 600 19

>0.8 to 2 Upto 1420 600 21

)��%' � 2200 mm. maximum

�� Normal as per specification

%��)�� Uniform oiling throughout the strip (coating thickness not measured)

�� Normally strips have roughness value below 1.5 micron

�� )� �� Coils are wrapped in polythene sheet/HDPE, VCI paper and metal packedwith edge protector and without inner sleeve

�� (�� Actual net weight mentioned on the coils

�� %��*� � 250 metric tonnes per size in each size/grade combination

"� ��#�� + 5% at seller’s option

�� Size; Grade; Contract No.; Coil No.; Gross weight; and Net weight

� �� By Bokaro Steel Plant. Buyer can also inspect the materials at the Plant beforeits despatch


��)��0��)��

'��

With an annual production of 1.6 million tonnes

of saleable steel, the plant is a major producer of

Railway track materials, Billets, Structurals and

Merchant products.

��

Billets, Medium Structurals, Merchant Rounds,

Re-bars, Skelp, Wheels and Axles.

Bill

ets

�� Durgapur Steel Plant

�� BOF, Continuous Casting

��*�� 100x100x9000/12000mm.125x125x9000/12000mm.

�� With the following chemical compositionas per ladle sample analysis(*)

C : 0.17 - 0.23%

Mn : 0.50 - 0.90%

S&P : 0.05% Max each

Si : 0.10% - 0.35% (Silicon killed)

+1,Restrictions within the specified ladle sample analysiscan be agreed depending on the availability

2��Chemistry different from above may also besupplied after confirmation by us

��#�)� �� All billets shall be supplied in ‘As Cast’ condition only

�� As per is : 2830/1992 with the following

100x100mm. 125x125mm.

Tolerance on Dimension +/-3mm. +/-5mm.

Diagonal Difference +8 (Max) +10mm. (Max)

Tolerance on Length +100/-200mm. +100/-200mm.

�� Loose


�� %��

"� ��# � 1000 metric tonnes


��

��

��

A major producer of flat, tubular and coated steel

products, this plant produces annually 1.6 million

tonnes of diversified steel items.

��

Wide and Heavy Plates, Hot-rolled Sheets/Coils,

Chequered Plates/Coils, Cold-rolled Sheets/

Coils, Galvanised Plain/Corrugated Coils/Sheets,

Electrolytic Tin Plates, Electrical Steel Sheets in

Coils, ERW Pipes, Spirally Welded Pipes.

MS

Plat

es��

�� Rourkela Steel Plant

��

ASTM A 36BS-4360/1990 40 EE/43/EEJIS-G-3101-SS400DIN-17100 RST 37.20/ST 44.2 8-20 mm.BSEN 10025/1993 S-235 JR G2IS-2062 Grade B/Grade CJIS-G-3106-SM400 A/B

�� "��#

LRS Grade A with Lloyds Certification 8-20 mm.

%��

�� 8 to 10 mm. : maximum 10%* above 20 mm. upto 36 mm.:Very limited quantity as per

mutual agreement

�� &��

For 8 mm. upto 10 mm. 2000-2500 mm.

Above 10 mm. upto 20 mm. 1600-2500 mm.

Above 20 mm. upto 36 mm. 2000-2500 mm.

�� 6000 to 12000 mm.

* Plates above 20mm. and upto 36mm. will be flame cut with gas.

�� In bundles of 10-15 metric tonnes for Plates upto 12 mm. thickness. Loose forplates above 12 mm.

�� : 1. The size ranges are indicative only and certain thickness x width x length may notbe possible.

2. The size are to be dealt in metric system only.

3. All plates are supplied in unnormalised, as rolled condition.

4. Offers are subject to availability and confirmation of terms and conditions on caseto case basis.


��

HR

Coi

ls


�� JISG 3101 SS 400, JISG 3132 SPHT 1/2, JISG 3131 SPHC, EN 10025 S235 JR,S275 JR, DIN 17100 ST 37.2/ST 44.2, BS 4360 GR. 40/43A, ASTM A36 / A 569/A 570 GR 33/40, SAE 1008-SAE 1018 or equivalent

��#�)� �� a) As Rolled (through Concast Route), fully Aluminium Killed with Siliconcontent of 0.04% Max. (Optional), not further worked than Hot Rolled,Non-Clad, Non-Plated, Non-Coated, Unoiled, Unpickled, Unskinpassed, MillEdge Condition, and on the basis of metric system

b) ‘‘Guarantee of no Coil Break’’ is not available since the same depends ondecoiling practice at end user’s end as well

c) No Temper pass facility is available

d) Coils are handled in “Eye to the Sky” position at the mill and made EyeHorizontal after receipt at Visakhapatnam

e) Coil I.D. - 760mm. (approx.)

f) Coil O.D. - 1800 mm. max.

g) Coil Weight - 8-17 metric tonnes

�� As per specifications ordered and mutual agreement. For example typical+3��.�� tolerance on thickness is 2/3 value of JISG 3193�� #,

�� Bare strapped with high tensile straps of min 3 nos. through the eye and min. 3nos. across the circumference or as mutually agreed

� (�� Based on actual net weight mentioned on the outer layer of the Coil

��*�� + !, &��+ !,

2.0-2.2 1030-1050

2.3-2.5 1030-1050

2.8-6.0 1030-1050/1230-1270

�� Size, Grade, Coil no., Heat no., Contract no., Net weight

�� %��

"� ��# � Per single width and per Grade : 250 metric tonnes


��$��)��

Elec

tric

al S

teel

s


�� Cold Rolled Non-Oriented Steel in Decarburised, fully Annealed conditionwith large grain size, graded on the basis of Epstein Core loss testing at1.5 Tesla induction for 50 Hz.

�� M-43, M-45, M-47 as per ASTM A 677 Specification

�� C-3 (Organic Coating) with 2-3 Micron and C-6 (Semi-Organic Coating) with0.5-1.5 Micron

�� 0.5 mm. x 1000 mm.

�� 510 mm.

�� Thickness : +/-0.04 mm. Width : -0/+1.5 mm.

Camber : 1.0 mm. max. per 2000 mm. length

Flatness : 2% Max. (wave height / wave length x 100)

Bow Height : 10 mm. max. at 0.5 metre length (500 mm. length)

Burr Height : 50 micron max.

Stacking Factor : 95-97% for 0.5 mm. thick depending on coating thickness

�� (Values are typical but not Guaranteed)

�� Grade Hardness Y.S. U.T.S. El% Core Loss(HRB) (Kg/sq. mm.) (Kg./sq. mm.) (max)

M-43 70 32 46 25 4.01

M-45 68 30 43 27 5.31

M-47 67 28 42 28 6.98

�� !"""#$�

��

�� M-43 1.62

M-45 1.64

M-47 1.65

��%�� 2.5 - 6 metric tonnes

��&�� Coils will be in horizontal eye position strapped with 4 eye and 3 circumferentialHigh Tensile Straps

Material is first wrapped with VCI film and then with polythene type sheetfollowed with additional layers of stretch film coating. It is then packed inGalvanised sheets metal packing. Metallic collars are provided in the eye of thecoil and on the outer diameter

�� By Rourkela Steel Plant

�� '(�� Visakhapatnam, India

)�� Rourkela

SteelPlant

Che

quer

ed P

late

s


�� A) "��# : IS-3502 (Base Steel conforming to IS 2062 GR. ‘B’ KilledSteel Processed through Concast Route) in Mill Edgecondition

B) �� '��(��#�)� ��

��)�� - ��

Coil ID : 760 mm. Thickness : 4 - 10 mm.

Coil OD : 1850 mm. max. Width : 1250 mm.

Coil wt. : 9 to 15 metric tonnes Length : 5000/6300/

Telescopicity : 50 mm. max. 10,000 mm.

Tongue : 500 mm. max.& Fish Tail aiming to zero

)��4�� Tear drop only

Bead Height : 0.8 mm. - 1.0 mm.

�� &�� -0 / +20 mm.

�� )� �� Bare, with high tensile straps of 3 nos. through eye and 2 nos. on circumference

�� (�� As per Net Weight mentioned in the Cloth Identification Tag and Invoice

��*�-"� ��# � �� 4-10 mm.

&�� 1250 mm.

3��2� 0�� Orders in 1000 - 1270 mm. can be considered only in case of substantial orders&�� on mutual acceptance

�� Coil No., Size and Grade will be painted on each coil. A cloth identification tagwill be fixed on the inner eye of each coil indicating Coil no., Size, Grade, NetWeight and Contract No.

� �� By Rourkela Steel Plant


��)��4��-��

)��

��

��(��)� ��

Any requirement for cut-to-size Hot-rolled and

Cold-rolled materials can be met through our

Joint Venture Service Sentre M/s SBSCL located

at Bokaro.

Cus

tom

ised

Pro

duct

s

$��)��Coil ID : 508 - 610 mm.

Coil OD : 800 - 2000 mm.

Coil Weight (max.) : 16 metric tonnes

Slit Width Tolerance : +/- 0.2 mm.

Maximum Slit Width : 1600 mm.

Minimum Slit Width : 65 mm.

)�� (��)� ��

)��)��

Coil ID : 510 - 610 mm.

Coil OD : 800 - 2200 mm.

Slit Width Tolerance : +/- 0.2 mm.

Maximum Slit Width : 1600 mm.

Minimum Slit Width : 65 mm.

$�� - ��

Minimum Length : 350 mm.

Maximum Length : 5000 mm.

Tolerance : +5 / -0 mm.

)��

Minimum Length : 200 mm.

Maximum Length : 4000 mm.

Tolerance : +0.35 / -0 mm.

��

International Trade DivisionHindustan Times House, 13th Floor, 18-20, Kasturba Gandhi Marg, New Delhi - 110 001, India.

Tel. No. : 00-91-11-23355733, Fax : 00-91-11-23321018, 23712774, E-mail: [email protected]

(The details given in this brochure are only by way of general information and do not constitute a formal offer.)

SAIL – Reaching out to Global Markets · 2016-03-03 · Steel Authority of India Limited (SAIL)...

Documents

Transcript of SAIL – Reaching out to Global Markets · 2016-03-03 · Steel Authority of India Limited (SAIL)...