Safety, Technology & Innovation RK-Series Rope Tension ...€¦ · RK-Series Rope Kit Hardware...
Transcript of Safety, Technology & Innovation RK-Series Rope Tension ...€¦ · RK-Series Rope Kit Hardware...
RK-Series Rope Kit Hardware Contents Available Optional Hardware (can be ordered individually)
3.300"
M8 X 1.25
2.00"51mm
84mm
3.300"
M8 X 1.25
2.00"51mm
84mm
7.50" to 9.750"190mm to 248mm
7.50" to 9.750"190mm to 248mm
9.250"235mm
6.00" to 8.500"152mm to 216mm
PN 44506-4710Eye Bolt SS Quick Link
(only available with the RK-Series Rope Kitfor up to 50m rope span)
4mm Allen Wrench(only available with RK-Series Rope Kit)
Note: See table below for quantity for each RK-Series Rope Kit
ThimbleGalv: PN 44506-4771SS: PN 44506-4770
Double Loop ClipGalv: PN 44506-4721SS: PN 44506-4720
TurnbuckleGalv: PN44506-4731SS: PN 44506-4730
Tensioner Gripper SSPN 44506-4700
Tensioner Gripper SSPN 44506-4700
SpringGalv: PN 44506-0730
Double Loop Clip
Thimble
Step 1: wire rope enters Tensioner/Gripper hole 1.
Step 2: pass wire rope through hole 2.
Step 3: bring wire rope back through hole 3.
Step 4: loop wire rope and terminate into hole 4.
Step 5: Tighten Allen head screw with M4 allen key
Follow steps 1 through 5 in the illustration below to attachthe wire rope to the Tensioner Gripper Assembly.
The Double Loop Clilp is used to connect totensioning hardware or to terminate rope span.
Rope Pulley SSPN 44506-4780
ø 26
27
76.80
40
RK-Series Rope Tension Kits and Accessories
Safety, Technology & Innovation
Operating Instructions for Rope Tension Kits and Accessories
RK-Series Quick Link Eyebolt TensionGripper
Allen Wrench Part No.
RK5, 5m Rope Kit 1 3 1 44506-2705RK10, 10m Rope Kit 1 5 1RK15, 15m Rope Kit 1 7 1RK20, 20m Rope Kit 1 9 1RK30, 30m Rope Kit 1 12 1RK50, 50m Rope Kit 1 20 1RK80, 80m Rope Kit No 30 2RK100, 100m Rope Kit No 37 2RK126, 126m Rope Kit No 45 2
11 1111222
44506-271044506-271544506-272044506-273044506-275044506-278044506-271144506-2726
Eye BoltsGalv: PN 44506-0720SS: PN 44506-4710
SS: PN 44506-4750
Tension IndicatorIndicator shown with properlyadjusted tension.
every 3 meters 500mmMax
500mmMax every 3 meters
up to 30m Spring Tensioner Gripper
Tensioner GripperSpring
every 3 meters
up to 100m
every 3 meters
Spring Tensioner Gripper
500mmMax
500mmMax
500mmMax
500mmMax
RK-Series Rope Tension Kits and AccessoriesOperating Instructions for Rope Tension Kits and Accessories
every 3 meters 500mmMax
500mmMax every 3 meters
up to 50mTensioner Gripper Tensioner GripperER5018 ER5018 ER5018
every 3 meters 500mmMax
500mmMax every 3 meters
up to 60m Spring Tensioner Gripper
every 3 meters 500mmMax
500mmMax every 3 meters
up to 80mTensioner Gripper Tensioner GripperER6022 ER6022 ER6022
every 3 meters 500mmMax
500mmMax every 3 meters
up to 100mSpring Tensioner Gripper
every 3 meters 500mmMax
500mmMax every 3 meters
up to 125mTensioner Gripper Tensioner Gripper
ER1022 ER1022 ER1022
up to 100mER1032
Accessories Material Quantity PNSM06 -TK00, Tensioner Kit Stainless Steel Turnbuckle: 1
Rope Grips: 8Thimbles: 4
44506 -0700
SM06 -TG00, Tensioner Gripper Stainless Steel 1 44506 -4700SM06 -EB10, Eye Bolt Stainless Steel 8 44506 -4710SM06 -EB20, Eye Bolt Galvanized 1 44506 -0720SM06 -DL20, Double Loop Clip Stainless Steel 4 44506 -4720SM06 -DL21, Double Loop Clip Galvanized 4 44506 -4721SM06 -THSS, Thimble Stainless Steel 4 44506 -4770SM06 -THGV, Thimble Galvanized 4 44506 -4771SM06 -TB30, Turnbuckle Stainless Steel 1 44506 -4730SM06 -TB31, Turnbuckle Galvanized 1 44506 -4731SM06 -SP30, Spring Galvanized 1 44506 -0730SM06 -SP50, Spring Stainless Steel 1 44506 -4750SM06 -RPSS, Rope Pulley Stainless Steel 1 44506 -4780
Installation Guide1. Installation of all Safety Rope Switch systems must be in accordance with a risk assessment for the individual application. Installation must onlybe carried out by competent personnel and in accordance with these instructions. 2. Rope support eyebolts must be fitted at 2.5 m. min. to 3 m. max. intervals along all rope lengths between switches. The rope must be supported no morethan 500 mm from the switch eyebolt or Safety Spring (if used). It is important that this first 500 mm is not used as part of the active protection coverage.3. Tensioning of rope is achieved by use of tensioner / gripper assemblies. Typical operational conditions for successful operation of system is lessthan 75 N. pulling force and less than 150 mm deflection of rope between eyebolt supports. NOTE: For further detailed installation instructions and installation examples use the following link: www.sti.com/safety/index.htm (go to "Proper Installation of Rope or Wire Pull Switches”)
Recommended Rope Span Options and Fittings
OMRON SCIENTIFIC TECHNOLOGIES, INC.
©2013 Omron Scientific Technogies, Inc. All rights reserved. P/N 99466-0010 Rev.C
Safety, Technology & Innovation
OMRON CANADA, INC. • HEAD OFFICEToronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com
OMRON ELECTRONICS DE MEXICO • HEAD OFFICEMéxico DF • 52.55.59.01.43.00 • 01-800-226-6766 • [email protected]
OMRON ELECTRONICS DE MEXICO • SALES OFFICEApodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • [email protected]
OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICESão Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br
OMRON ARGENTINA • SALES OFFICECono Sur • 54.11.4783.5300
OMRON CHILE • SALES OFFICESantiago • 56.9.9917.3920
OTHER OMRON LATIN AMERICA SALES54.11.4783.5300
Authorized Distributor:
C322I-E-01 03/15 Note: Specifications are subject to change. © 2015 Omron Electronics LLC Printed in U.S.A.
Printed on recycled paper.
Automation Control Systems• Machine Automation Controllers (MAC) • Programmable Controllers (PLC) • Operator interfaces (HMI) • Distributed I/O • Software
Drives & Motion Controls • Servo & AC Drives • Motion Controllers & Encoders
Temperature & Process Controllers • Single and Multi-loop Controllers
Sensors & Vision• Proximity Sensors • Photoelectric Sensors • Fiber-Optic Sensors• Amplified Photomicrosensors • Measurement Sensors• Ultrasonic Sensors • Vision Sensors
Industrial Components • RFID/Code Readers • Relays • Pushbuttons & Indicators• Limit and Basic Switches • Timers • Counters • Metering Devices • Power Supplies
Safety • Laser Scanners • Safety Mats • Edges and Bumpers • Programmable Safety Controllers • Light Curtains • Safety Relays • Safety Interlock Switches
OMRON AUTOMATION AND SAFETY • THE AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com
OMRON EUROPE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • +31 (0) 23 568 13 00 • www.industrial.omron.eu