SAFETY, RELIABILITY AND PROTECTION FOR SILICON CARBIDE ...€¦ · efficiently cooled power bus bar...
Transcript of SAFETY, RELIABILITY AND PROTECTION FOR SILICON CARBIDE ...€¦ · efficiently cooled power bus bar...
SAFETY, REL IABIL ITYAND PROTECTION FOR S IL ICON CARBIDE (S iC) INVERTERS
Serving the Power Electronics Market
• Cooling• Bus Bars• Fuses
MERSEN, YOUR SOLUTION PARTNER FOR S IL ICON CARBIDE (S iC) APPLICATIONS
The next generation of Power Conversion Systems Enabled
by SiC Power Devices is now a reality. As the global trends
promote greener energy with more strict regulations and
standards, newer and more efficient switching devices such
as Silicon Carbide (SiC) devices are gaining acceptance in
various markets from transportation to solar industries.
Compared to silicon devices, SiC devices switching
can exceed several 100’s of kHz, offering substantial
improvements in efficiency. SiC devices also provide
enhanced power density and higher operating temperature,
making them a very attractive alternative to bigger and less
efficient silicon family of devices. As the overall footprint
of inverters with SiC devices shrink, the cooling aspect of
the system becomes a new challenge. Mersen has been
preparing for this challenge and has developed embedded
heat-pipe heat sinks to extract concentrated heat from
areas under the SiC devices and to disperse that heat over
a larger surface area before the heat is passed on to the
ambient environment.
Mersen’s patented Swaged Fins technology is a glue-less,
metal on metal fabrication process to affix fins to heatsink
base plate, providing a final product that can withstand
MERSEN IS A GLOBAL EXPERT IN ELECTRICAL POWER AND ADVANCED MATERIALS
SOLUTIONS FOR POWER MANAGEMENT FROM MERSEN
EP.MERSEN.COM
FL-SPM-SIC-001 | 01.17 | PDF | © Mersen 2017
Mersen is your
supplier of choice for
power management
solutions for various
industries. Contact us at
ep.mersen.com for more
information.
HIGH-FREQUENCY WELDING BUS BAR
HIGH VOLTAGE SEMICONDUCTOR
PROTECTION FUSES
SWAGED DUAL SIDED COPPER HEATSINK
EMBEDDED HEAT PIPE HEATSINKS
HIGH FREQUENCY INVERTER BUS BAR
much higher temperatures compared
to conventional bonded or glued
fin heats sinks. As SiC devices can
operate at much higher switching
frequencies, parasitic inductance and
“skin effect” phenomena become
crucial considerations for bus bar
designs. Mersen engineering teams
can work closely with customers to
design bus bars to compensate for
“skin effect” and to build the most
efficiently cooled power bus bar
solution.
When it comes to protection of
SiC devices against electrical
overcurrents, the most effective
means is the high speed
semiconductor protection fuse (SPF).
SPF has a significantly faster clearing
time to prevent catastrophic
semiconductor device failure.
If you are ready to switch to SiC
devices, Mersen is the right partner
for your cooling, bus bars and
electrical protection.
ALTERNATIVE ENERGY MIL ITARYTRANSPORTATION DESIGN • S IMULATIONS • TESTING •INDUSTRIAL SOLUTIONS FOR S iC
APPLICATIONS