SAFETY INSPECTION & COMPLIANCE -...
Transcript of SAFETY INSPECTION & COMPLIANCE -...
Page 1
STATE OF ALASKA
COMPETENCY SPECIFICATION
Occupational Group: LABOR, TRADES AND CRAFTS
Occupational Family: Safety Inspection and Compliance996X
CAREER AREA:Occupational Safety Compliance Officer 9961-49 Electrical Inspector 9962-49 Elevator Inspector 9964-49Plumbing Inspector 9966-49
Definition: Performs inspections and investigations of workplaces for occupational safety compliance or functions as a specialty inspector to assure compliance with applicable trade and building codes.
Levels:ADVANCED JOURNEY: Work routinely requires the resolution of unusual, difficult or exceptional issues by developing or modifying approaches, methods or techniques. 996x-49 This is the specialized, proficient level capable of assessing compliance with the
various codes, standards and practices relating to the assigned inspection specialty.Positions conduct scheduled inspections, investigate accidents or complaints of unsafe conditions, and prepare comprehensive inspection reports to document hazards and/or building systems that are out of compliance and to inform employers, contractors and workers of necessary corrective measures.
Essential Core Competencies: “Common or typical” to the career area and required as appropriate to the specific position. These are included in the position description and performance evaluation review process
Safety Inspection & Compliance core
Knowledge of • inspection and citation procedures related to the assigned inspection function • case file preparation and administrative hearing and court procedures
Ability to • observe and analyze the job environment or building systems installation to determine if
code violations are present• assist in preparing cases for prosecution• testify as expert witness at administrative review and judicial proceedings • understand, interpret and apply regulations related to the work • evaluate a variety of interrelated information involving existing and/or potential hazards
related to the assigned area of inspection and determine the best course of action
Occupational Group: LABOR, TRADES AND CRAFTS Occupational Family: Safety Inspection and Compliance 996x
LTC Study 07/01/99 Page 2
• write reports and maintain records which may require use of a computer • communicate and consult effectively with agency representatives, officials, employers,
workers and the public who may be angry and inconvenienced • work cooperatively and effectively as a team member • react effectively in emergency and disaster situations • effectively self-manage time and priorities to schedule workload
JOURNEY level workers will be required to meet the following TO: • have the required skills to handle difficult problems encountered • have comprehensive knowledge of the subject or occupational area • use judgment in determining actions • exercise independence in determining actions • plan and lay out work (i.e. determine how to do one’s own work) • make appropriate choice among alternatives • complete work with only limited instruction and/or little or no advice • proceed with work without having results or products generally reviewed in progress
ABOVE JOURNEY / ADVANCED level worker encompasses in addition the requirement TO: • complete unusually difficult work • adapt and modify procedures, operations or processes required to complete the work • work in absence of available or applicable guidelines • consistently apply skills of a higher level of difficulty required of the journey Technical Competencies and Certifications as specified for unique career area: CORE:
Alaska Driver’s License SPECIFIC: Knowledge of
State and federal Occupational Safety and Health codes and standards and governmental regulations related to occupational safety chemical, combustible, electrical and liquid petroleum fire hazards uniform plumbing code swimming pool, spa and hot tub codes uniform solar energy code uniform building code uniform mechanical code uniform fire code national electrical code national electrical safety code national electrical trade practices underwriters laboratory standards
Occupational Group: LABOR, TRADES AND CRAFTS Occupational Family: Safety Inspection and Compliance 996x
LTC Study 07/01/99 Page 3
work methods, practices and equipment used in one or more of the following industries [ ] construction [ ] logging [ ] manufacturing [ ] seafood processing [ ] oil and gas extraction Ability to • perform equipment safety checks, identify problems and determine appropriate actions • review blueprints, plans and construction information to evaluate compliance with codes
and sound construction practices • issue cease and desist orders or misdemeanor citations to unlicensed contractors and
workers, or refer questionable cases for further investigation as appropriate • determine if hazards or code violations constitute imminent danger and determine the
appropriate course of action within established guidelines • develop and present training and seminars related to codes and safety regulatory issues Specialized certificates may be required for individual positions:
Certificate of fitness as a journey electrician or power lineman Certificate of fitness as a journey plumber Certification by the National Association of Elevator Safety Authorities Certification by the National Association of Amusement Ride Safety Officials
Environmental Conditions and Physical Requirements: Exposure to
extremes of high and low temperatures falling objects flammable gas and explosive materials hazardous chemicals, materials high places high voltage electricity inclement weather conditions loud noise moving vehicles, equipment, machinery and tools sharp objects or shear points slippery and insecure surfaces toxic dust and fumes unsanitary conditions, such as raw sewage
Ability to perform medium physical exertion to include lifting, bending, carrying, pushing, pulling and climbing
Occupational Group: LABOR, TRADES AND CRAFTS Occupational Family: Safety Inspection and Compliance 996x
LTC Study 07/01/99 Page 4
Equipment:
Documentation cameras and video equipment
Electrical inspection devices circuit testers amp testers volt/ohm meters
Air sampling devices chemical indicators detector tubes direct reading instruments explosive meters flammable vapor meters gas chromatograph hydrogen sulfide meters organic vapor analyzer oxygen level meters pumps ventilation meters
Elevator equipment and tools
Environmental assessment devices heat stress monitors light meters radiation instruments sound meters
Measuring devices PSI gauges pH testers wire rope gauge tach/speed meter
Personal protection equipment respirators safety glasses suits
Occupational Group: LABOR, TRADES AND CRAFTS Occupational Family: Safety Inspection and Compliance 996x
LTC Study 07/01/99 Page 5
Plumbing
backflow prevention test equipment
Other Orig: LTC Study 07/01/99 (JKE) Previous history: Class codes; P9352-50; P9361-50; P9930-50; P9940-50