The many hazards of manual Cut & Bend of

rebarsSafety First With Tiscon Readybuild

Manual Cut & Bend of Rebars = High

Risk• When it comes to rebar

cutting, bending and welding

• The risk of injuries is high especially since it is cut and bent manually by unskilled labour

• This not only increases the chances of hazards but also results in inaccuracies and inefficiencies

Improper Cut & Bend Of Rebars =

Risk

Of Safety For Workers• Proper rebar bending

techniques are key to making sure your rebar structural brace is done accurately

• If rebar is bent or cut improperly the safety of the construction as well as the construction professional is at stake

• Today, advancements in bending equipment benefits safety and reliability, while also improving convenience

Think About It..• While cutting & bending

rebars manually, you can either hurt yourself

• Or hurt someone else

Some safety measures across the

globe..• The Australian

Government prizes human life as their most valuable resource

• Thus, the Government has banned manual rebar cutting, wielding and bending when it comes to construction

Simple Measures To Ensure Workers’

Safety• Have the right safety equipmentRebars can be sharp and heavy, and can create sparks when being cut hence, wearing the right protective gear is crucial. Wear eye protection, sleeved shirts, long pants, gloves, hard hats, earplugs, safety goggles, and sturdy boots when handling rebars or construction material.

• Trained personnelTraining should include proper lifting techniques to help reduce common back injuries sustained on the job. training in work-site safety and operating procedure either on-site or at a training facility becomes imperative to avoid hazards and injuries.

Is there any safe way to cut & bend

rebars?• New-age cut & Bend

technology like the Cut & Bend services under Tiscon Readybuild aims at providing customised shapes of rebars needed at constriction sites, technologically

• With Readybuild, the construction companies don’t need to worry about the availability of SKUs needed in the cut & bend structure

Technologically Cut & Bend Rebars• Readybuild centres customise the

length of the rebars and bend them at required angles in accordance with the project’s blueprint. It is capable of making the common shapes stirrups to complex helical shapes

• The Readybuild centres are designed on and supported by the technology used in the cut & bend service offered by NatSteel, a wholly-owned subsidiary of Tata Steel

To know more log on to http://readybuild.tatatiscon.co.in/