Low and high temperature Vacuum and high-pressure Min and Max Flow Control

Various applications Abrasive media and corrosive media

Small and large valve sizes

YOUR VALVE SPECIALIST SAFE AND ECONOMIC

SHUT-OFF AND MODULATING SERVICE - SAFE AND ECONOMIC

OHL Gutermuth has made a name for itself throughout the world in special

valves and offers customized solutions for shutting off, throttling and

regulating media under extreme conditions. The particular strength of the

company lies in its decades of experience with a wide variety of use-spe-

cific requirements in valve technology, which comes from a knowledge

of engineering processes and competence in proven and innovative

technology concepts. OHL Gutermuth occupies a leading position throughout

the world in many sectors. The customer‘s wishes are converted directly

into design, development and production, whilst the diversity of the tech-

nical programme and high reliability always ensure that you, as custo-

mers, receive the solution best suited to your particular problem. Custo-

mer confidence from consultation and dialogue is the main concern from

the outset, well to the fore at the order stage. Each of our offers to you,

specified and drawn up in technical detail, are based on an accurate ana-

>> TECHNOLOGICAL COMPETENCE IN THE WHOLE FIELD

FROM PLANNING TO DESIGN COMPLETE SOLUTIONS FOR ALL CONCEIVABLE PROBLEMS

Construction Calculation 3D>> >>

Page 02 | SPECIAL VALVES

lysis of the problem, design, dimensioning and valve computation with

sound-pressure level and Kv calculations. We rely on a good partnership

and our first customer addresses haverelied for decades on the name OHL

Gutermuth nationally and internationally. Innovative special valve techno-

logy „made in Altenstadt“.

Sales Programme Tight shut-off butterfly valves Dampers Butterfly control valves Diverting valves Bottom valves

Range of Application Corrosion Abrasion High temperature Cryogenic

Medium Liquid Vaporous Gaseous Bulk material Pasty medium High riscosity medium

Materials Carbon steel Stainless steel Exotics Nonferrous metal Plastics

Coatings Hard- and soft rubber Synthetic resin plastic Aluminized Chromium plated Hard faced

Actuators Pneumatic Hydraulic Electric

Area of Use01 Chemicals

02 Petrochemicals

03 Power stations

04 Pulp and Paper mills

05 Environmental technology (for instance recovery)

06 Post combustion plants

07 Air and air-conditioning systems

08 Metallurgy, coking plants, furnace construction

09 Waste-air technology

10 Smoke gas

11 Flue-gas purification systems

12 Incineration plants

13 Refrigeration technology, ship building

14 Sugar factories

15 Sulphuric acid plants

16 Desulphurization of Natu-ral Gas. Sulphur Plants

OHL GUTERMUTH OUR DIVERSITY IS YOUR PROFIT

Computer Numerical Control - Machining>>

SPECIAL VALVES | Page 03

Within the scope of this wide field of use, for example in the LNG/

LPG tanker sector, the company uses its know-how in constructive

design. Many years of experience in the use and processing of ma-

terials having high toughness under cold conditions are a guarantee

of the operating reliability of all components subjected to low tem-

peratures. Stringent tightness requirements are reliably satisfied.

Constructive elements are safe from the risk of icing-up.

>> LOW AND HIGH TEMPERATURE -196°C TO +1300°C

SPECIAL BUTTERFLY VALVES FOR LOW TEMPERATURE

Page 04 | SPECIAL VALVES

Predominantly for use in metallurgical works, incinerators and the

construction of industrial furnaces, OHL Gutermuth designs indus-

trial valves meeting all operation-specific requirements by the use

of heat-proof and nonscaling materials, with stress and deforma-

tion stability in the high-temperature range through the use of low-

ribbing components and rotationally symmetrical constructional

elements and with the least possible transmission of heat from the

media into the environment. In addition, if required, outfitting can

be carried out with brick lining and extended outer bearings.

Special designs together

with highly heat resistant or

scaling resistant materials

fulfill all the functional

requirements imposed on

the valve, even in the red

hot state.

SPECIAL BUTTERFLY VALVES FOR HIGH TEMPERATURE

SPECIAL VALVES | Page 05

Depending on the application in question, shut-off elements (valves) in

vacuum systems can also be subject to special requirements, in additi-

on to the general technical requirements for shut-off elements that are

typical of vacuum technology and have to be taken into consideration in

engineering the products.

The minimum displaced ultimate pressure and the high flow resistance of

components in the molecular flow range must be taken into consideration

in configuring and selecting vacuum valves. In addition, minimum leakage

rates are required for the valve housing and valve seat.

>> VACUUM AND HIGH-PRESSURE

VACUUM AND LOW PRESSURE SOLUTION

Page 06 | SPECIAL VALVES

OHL Gutermuth manufactures high-pressure butterfly valves that

offer zero leakage, accurate control of the medium and are available in

resilient or metal seat. Firesafe butterfly valves are pressure-rated

up to ANSI CL. 2500 and come in sizes up to 2800mm. Their Zero

Leakage Quarter Turn high-pressure butterfly valve is designed for

abrasive services and extreme temperatures.

SPECIAL BUTTERFLY VALVES FOR HIGH-PRESSURE

SPECIAL VALVES | Page 07

The tight shut-off butterfly valves type KX are used as flow control units in the automatic

and remote control systems to adjust flow intensity of liquids and gases. OHL Gutermuth

butterfly valves have been solving fluid control problems in oilfield and general industrial

applications for over 50 years. Today’ s Control valves are putting that experience to

work for you in more ways than ever before, meeting your changing needs with depen-

dable OHL butterfly valves, operators and actuators.

>> MIN AND MAX FLOW CONTROL

SPECIAL BUTTERFLY VALVES FOR MIN AND MAX FLOW CONTROL

3

1

5

4

2

FEATURING:

- INCREASED CONTROL RANGE

- LOW FLOW CHARACTERISATION

- CAVITATION REDUCTION

- LONG TERM SEAT TIGHTNESS

- NOISE CONTROL AT LOW FLOW -HIGH DELTA P SITUATION

1. NORMAL FLOW DIRECTION

SEAL MOUNTING WITH DISC AT 90 DEGREE OPEN FROM THIS END

2. THIS SIDE KEEPS CLOSED UP TO 15 DEGREE OPENING

3. REVERSED FLOW DIRECTION

4. STARTING FLOW

5. PRESSURE STAGING

Page 08 | SPECIAL VALVES

SPECIAL VALVES | Page 09

1. Angle valve with pressure-balanced seat.

Conditions of use: Hot gas with differential pressure of

6 bar and working temperature of 1100°C.

2. Hot gas mixing valve, possible design temperatures

up to 1300°C.

3. Butterfly valves with noise reduction cone.

Noise reduction up to 25 dba.

>> VARIOUS APPLICATIONS

VARIOUS APPLICATIONS KEYFACTS

5.

1. 2.

Page 10 | SPECIAL VALVES

4. Butterfly valves with heating jacket used in case of caking media.

5. Butterfly valves, fully made from Titanium used for

aggressive media, specialized in shipbuilding.

6. ESD (Emergency shut down) solutions with quick operating

time of 0,1 –1 seconds. Available up to size DN 2000 or 80“.

Actuator solutions as pneumatic, hydraulic and electro-hydraulic.

6.

3. 4.

SPECIAL VALVES | Page 11

Wherever there are high flow velocities in conjunction with solid contents in the medium,

cavitation, bulk materials or other abrasive media, OHL Gutermuth offers industrial valves

in a wide variety of designs. The solution to the problem lies in particular in the flow geo-

metry of the wearing parts of these valves and in the material selection and coating.

The body, disc and shaft are made abrasion-resistant and robust to wear. Special body pro-

tection with a solid hardmetal or ceramic insert, solid disc of hard metal or ceramic as welI

as protective sleeves of the shafts in the critical transition region between body and shaft ideally

satisfy the abrasive operating conditions.

>> ABRASIVE MEDIA AND CORROSIVE MEDIA

SPECIAL BUTTERFLY VALVES FOR ABRASIVE MEDIA

Page 12 | SPECIAL VALVES

The chemical industry above all requires special corrosion resistance

for all media-affected parts and their high operating reliability and

long service lives against corrosive attack. OHL Gutermuth has for

decades been one of the leading tenderer for special valves for the

chemical industry and uses its particular experience when selecting

suitable corrosion-resistant materials for media-affected parts and

corrosion-resistant coatings, depending on economical considerations

and technical requirements of the customers.

SPECIAL BUTTERFLY VALVES FOR CORROSIVE MEDIA

SPECIAL VALVES | Page 13

>> SMALL AND LARGE VALVE SIZES

Page 14 | SPECIAL VALVES

SPECIAL VALVES | Page 15

Butterfly Control valves up to diameter DN 3500 / 140“

Tight shut-off valves up to DN 3200 / 128“

Hot Gas Mixing valves up to DN 3500 / 140“

Reactor Switching valves up to DN 1600 /64“

* Bigger sizes on request.

SPECIAL VALVES FROM SMALL TO BIG SIZES

YOUR VALVE SPECIALIST

OHL Gutermuth Industrial Valves GmbH

Helmershäuser Straße 9 + 12

63674 Altenstadt

Phone +49 (0) 60 47. 80 06 - 0

Fax +49 (0) 60 47. 80 06 - 29/36

info@ohl-gutermuth.de

www.ohl-gutermuth.de

ООО "OHL Gutermuth"121471, Moscow

Petra Alekseeva str.

12 build. 2, office 308.

Phone +7 495 79-79-241

office@ohl-gut.ru

web

site

:

com

pany

vi

deo: