Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial...

101
EDT 300/ENGR 306 1 Sketching Sketching Chapter 2 Chapter 2 Sacramento City College EDT 300/ENGR 306

Transcript of Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial...

Page 1: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

EDT 300/ENGR 306 1

SketchingSketching

Chapter 2Chapter 2

Sacramento City CollegeEDT 300/ENGR 306

Page 2: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

2

Objectives Objectives

Describe the importance of freehandsketching for communicating technical ideas.

Letter clear, neat, freehand notes and directions on a technical drawing or sketch.

Communicate technical ideas through freehand sketching.

Page 3: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

3

Objectives Objectives

Develop design ideas through multi-view or pictorial sketches.

Page 4: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

4

Sketching and LetteringSketching and Lettering

Vocabularyarcsaxis (axes)compositionconcentric circlesellipsesGothic letteringguidelinesisometric linesisometric sketchletteringlinenonisometric lines

oblique sketchoverlayplanepointproportionradius (radii)tangent arcs texture

Page 5: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

5

SketchingSketching

Sketches•

Sketches bring ideas to life.•

Sketches communicate thoughts which cannot be said.

Freehand sketching is the simplest form of drawing.

Sketching is a quick way to express ideas, •

A sketch can greatly simplify a technical discussion.

Page 6: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

6

SketchingSketching

Professionals who use sketching•

Designers•

Drafters•

Technicians•

Engineers, and •

Architects

Sketching is used to explain complicated ideas or unclear thoughts.

Page 7: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

7

The Language of SketchingThe Language of Sketching

Four Basic Visual Symbols Which Can Be Seen.•

A point – a symbol that describes a location in space.

A line – A path between two points.

A plane – two non parallel lines define a plane which is a flat surface.

A texture or surface quality.

Page 8: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

8

The Language of SketchingThe Language of Sketching

Any idea, no matter how simple or complicated can be sketched using these four visual symbols.

Page 9: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

9

Reasons For SketchingReasons For Sketching

We draw sketches 1. To persuade people who make decisions about a project that an idea is good.

2. To develop a proposed solution to a problem so that a client can respond to it.

Page 10: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

10

Reasons For SketchingReasons For Sketching

We draw sketches3. To clarify a complicated detail of a drawing that has more than one view by enlarging it or by creating a simple pictorial (picture-like) sketch.

4. To give design ideas to drafters to that they can do the detail drawings.

Page 11: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

11

Reasons For SketchingReasons For Sketching

We draw sketches 5. To develop a series of ideas for refining a new product or machine part.

6. To develop and analyze the best methods and materials for making a product.

Page 12: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

12

Reasons For SketchingReasons For Sketching

We draw sketches7. To record permanently a design improvement on a project that already exists.

The change may result from a need to repair a part that breaks over and over again.

Page 13: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

13

Reasons For Sketching (contReasons For Sketching (cont’’d)d)

We draw sketches8. To show that there are many ways to look at or solve a problem.

9. To spend less time in drawing.

It is much quicker to make a sketch, which takes only a pencil and an sheet of paper, than to create a mechanical drawing.

Page 14: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

EDT 300/ENGR 306 14

Types of SketchesTypes of Sketches

Page 15: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

15

Types of SketchesTypes of Sketches

Any image drawn on paper freehand may be called a sketch.

Most drafters use several types of sketches.

The type of sketch used depends upon the purpose and the lifespan required for the sketch.

Page 16: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

16

Rough SketchesRough Sketches

Rough SketchesQuick and dirtyAre usually drawn quickly with jagged lines.

Primary purpose is to express thoughts quickly

Refer to Figure 2-21.

Page 17: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

17

Rough SketchesRough Sketches

GuidelinesInstruments or straightedges are not usedto prepare a rough sketch.

Instruments tend to restrict the creative expressions developed with god pencil techniques.

Avoid mechanical hard-line look.

Concentrate on using good proportions.

Page 18: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

18

Refined SketchesRefined Sketches

Refined SketchesAre drawn more carefully than rough sketches.

Show good proportion and excellent balance.

Page 19: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

19

Refined SketchesRefined Sketches

Refined SketchesYou may use a straightedge to control long lines on a refined sketch.

However, never allow the line to look mechanically drawn.

Sketched lines should have some irregular character.

Page 20: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

20

Presentation SketchesPresentation Sketches

Presentation SketchesPresentation sketches are pictorial sketches that have been greatly refined.

Are used to convince a client or management to accept and approve the ideas presented.

Page 21: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

21

Presentation SketchesPresentation Sketches

Presentation SketchesPictorial sketches have a three-dimensional view that can be understood easily by non-technical people.

Generally drawn so that they look glamorous, artistic or eye-appealing.

Page 22: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

22

Temporary and Permanent SketchesTemporary and Permanent Sketches

Sketches may be temporary or permanent.

Some are done just to solve an immediate problem.

Others are kept longer.

Page 23: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

23

The OverlayThe Overlay

A good way to refine a sketch is to use overlay paper.

Overlay is a piece of translucent tracing paper that is placed on top of a sketch or drawing.

Because you can see through the paper, you can quickly trace the best parts of the sketch or drawing underneath.

Page 24: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

24

The OverlayThe Overlay

Overlay is used in three important ways:

1. Reshaping a design (Fig 2-22).

2. Used to refine the drawing itself without really changing its shape entirely.

3. Can be used to add various options to a basic drawing.

Page 25: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

25

Page 26: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

26

Page 27: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

27

Views Needed For A SketchViews Needed For A Sketch

There are two types of drawings that you can sketch easily:

1. Pictorial drawing.

2. Multi-view Projection or Orthographic Projection.

Page 28: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

28

Views Needed For A SketchViews Needed For A Sketch

Pictorial drawing -The width, height, and depth of an object are shown in one view.

Page 29: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

29

Page 30: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

30

Views Needed For A SketchViews Needed For A Sketch

Multi-view Projection or Orthographic Projection

An object is usually shown in more than one view.You do this by drawing sides of the object and relating them to each other.

Page 31: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

31

Page 32: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

32

OneOne--View SketchesView Sketches

If an object can be described in two dimensions, a one-view drawing is generally sufficient.

These objects generally have a depth or thickness that is uniform.

The drafter may just give the third dimension as a numerical value, instead of showing the third view.

Page 33: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

33

Page 34: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

34

Page 35: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

35

TwoTwo--View SketchesView Sketches

Many objects can be described in twoviews.

Select the views carefully which describe the object well.

Page 36: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

36

Page 37: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

37

Page 38: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

38

Page 39: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

39

MultiMulti--View SketchesView Sketches

A pictorial drawing shows how the object looks in three-dimensional form.

However, a pictorial drawing may not show all the information desired.

Some of the lines and details may not be visible.

Page 40: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

40

MultiMulti--view Sketchesview Sketches

Page 41: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

41

The Glass BoxThe Glass Box

Use the "Glass box" to determine how many views are required to describe an object.

By "opening up" the glass box into one plane, you can see how it would be drawn on paper.

Page 42: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

42

Page 43: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

43

Page 44: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

44

Materials For SketchingMaterials For Sketching

Sketching has two major advantagesover formal drawings.

Only a few materials are required to create a sketch.

Pencil, PaperYou can create a sketch anywhere. No drafting table required.

You are ready to sketch with a pencil, an eraser, and a pad of paper.

Page 45: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

45

PaperPaper

Plain paper can be used for sketching.

If you need to refine the sketch, use tracing paper

Page 46: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

46

PaperPaper

You may also use graph paper to control proportions while sketching.

Alternative: Place graph paper underneath plain paper.

Page 47: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

47

PaperPaper

Generally 8-1/2 by 11 is the best sizefor making small sketches quickly.

Page 48: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

48

PaperPaper

You can hold the paper on stiff cardboard, or a clipboard while working on it.

Place graph paper under the tracing paper to help guide line spacing.

Page 49: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

49

Pencils and ErasersPencils and Erasers

Most drafters like to use soft lead pencils (Grades F, H, or HB).

Use an eraser that is good for soft leads,

Plastic eraser or kneaded-rubber eraser.

Page 50: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

50

Pencils and ErasersPencils and Erasers

Four types of pencil points are used for sketching:

Sharp.Near-sharp.Near-dull.Dull.

Page 51: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

51

Pencil SharpnessPencil Sharpness

Page 52: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

52

Line Types UsedLine Types Used

Many line types are used in sketchingVisible.Hidden.Cutting Plane.Center Line.Construction Line.Extension Line.

Refer to Figure 2-33.

Page 53: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

53

Page 54: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

54

Drawing LinesDrawing Lines

Lines drawn freehand have a “natural look”.

The slight changes in direction show freedom of movement.

Page 55: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

55

Drawing LinesDrawing Lines

To draw an object line:Hold the pencil far enough from the point that you can move your fingers easily and yet can put enough pressure on the point to make dense, black lines when necessary.

Page 56: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

56

Drawing LinesDrawing Lines

To draw a construction line.Use very little pressure on the point.

They should be light enough that they need not be erased.

Page 57: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

57

Drawing Straight LinesDrawing Straight Lines

Methods of Sketching Straight lines

1. Draw one continuous line.

Page 58: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

58

Drawing Straight LinesDrawing Straight Lines

Page 59: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

59

Drawing Straight LinesDrawing Straight Lines

2. Draw short dashes where the line should start and end.

Then, place the pencil point on the starting dash.

Keeping your eye on the end dash, draw toward it.

Page 60: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

60

Drawing Straight LinesDrawing Straight Lines

Page 61: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

61

Drawing Straight LinesDrawing Straight Lines

3. Draw a series of strokes that touch each other or are separated by very small spaces.

Page 62: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

62

Drawing Straight LinesDrawing Straight Lines

Page 63: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

63

Drawing Straight LinesDrawing Straight Lines

4. Draw a series of overlapping strokes.

Page 64: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

64

Drawing Straight LinesDrawing Straight Lines

Page 65: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

65

Drawing Straight LinesDrawing Straight Lines

Practice sketching straight lines beforeyou try to draw objects.

Draw vertical lines from the top down.

Draw horizontal lines from left to right if you are right handed (opposite if you are left handed).

Page 66: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

66

Slanted Lines and Specific AnglesSlanted Lines and Specific Angles

Sketch slanted, or inclined lines from left to right.

It might be easiest to turn the paperand draw an inclined line the same way as a horizontal line.

Page 67: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

67

Slanted Lines and Specific AnglesSlanted Lines and Specific Angles

Page 68: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

68

Slanted Lines and Specific AnglesSlanted Lines and Specific Angles

When trying to sketch a specific angle, first draw a vertical line and a horizontal line to form a right angle.

Divide the right angle in half to form two 45 degree angles.Or divide in thirds to make 30 degree angles.

Page 69: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

69

Slanted Lines and Specific AnglesSlanted Lines and Specific Angles

Page 70: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

70

Drawing CirclesDrawing Circles

Sketch a circle

1. Estimate the length of the radius and mark it off.

Use the marks as guides, draw a square in which you can sketch the circle.

Page 71: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

71

Drawing CirclesDrawing Circles

Page 72: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

72

Drawing CirclesDrawing Circles

2. Draw very light centerlines and draw bisecting lines through the center at convenient angles.

Estimate the length of the radius and mark off this distance on all the lines.The bottom of the curve is generally easier to form, so draw it first.Then turn the paper so that the rest of the circle is on the bottom.Finish drawing the circle.

Page 73: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

73

Drawing CirclesDrawing Circles

Page 74: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

74

Drawing CirclesDrawing Circles

Page 75: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

75

Drawing CirclesDrawing Circles

Page 76: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

76

Drawing CirclesDrawing Circles

Page 77: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

77

Drawing CirclesDrawing Circles

Page 78: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

78

Drawing Circles/ArcsDrawing Circles/Arcs

Page 79: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

79

Drawing CirclesDrawing Circles

3. Use your hand as a compassUse your little finger as a pivot at the center of the circle.Use your thumb and forefinger to hold the pencil rigidly at the radius you want.Turn the paper carefully under your hand.

Page 80: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

80

Page 81: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

81

Drawing CirclesDrawing Circles

4. Use two crossed pencilsHold them rigidly with the two points as far apart as the length of the desired radius.Put one pencil point at the center.Hold it there firmly and turn the paper, drawing the circle with the other point.

Page 82: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

82

Page 83: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

EDT 300/ENGR 306 83

ProportionsProportions

Page 84: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

84

Proportions for SketchingProportions for Sketching

Sketches are not made to scale.

BUT, a good sketch should always maintain the correct proportion.

Page 85: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

85

Estimating ProportionsEstimating Proportions

To sketch well, you must learn to eyeball (estimate by eye) an object's proportions.

Page 86: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

86

Estimating ProportionsEstimating Proportions

To estimate an objects proportions:1. Look at an objects largest overall dimension, usually width, and estimate the size

2. Next determine the proportion of the height to the width

Page 87: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

87

Technique In Developing ProportionsTechnique In Developing Proportions

Through practice you can train your eyeto work in two directions so that you can both divide and extend linesaccurately.

You should learn how to divide a line in half by estimating.

You can divide the halves to get fourths.

Page 88: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

88

Technique In Developing ProportionsTechnique In Developing Proportions

Using a similar technique, you can expand lines one at a time

Start by drawing a line of one unit, then increase it by one equal unit so that it is twice as long as the first.Practice techniques both horizontally and vertically.

Page 89: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

89

Page 90: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

90

Page 91: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

91

Making a Proportional SketchMaking a Proportional Sketch

Proportional Sketch Seven Step Process1. Observe the object

Page 92: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

92

Making a Proportional SketchMaking a Proportional Sketch

Proportional Sketch Seven Step Process2. Select the views needed

Page 93: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

93

Making a Proportional SketchMaking a Proportional Sketch

Proportional Sketch Seven Step Process3. Estimate proportions carefully.

Mark off major distances for width, height and depth in all three views.

Page 94: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

94

Making a Proportional SketchMaking a Proportional Sketch

Proportional Sketch Seven Step Process4. Block in the enclosing rectangles

Page 95: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

95

Making a Proportional SketchMaking a Proportional Sketch

Proportional Sketch Seven Step Process5. Locate the details in each of the views

Page 96: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

96

Making a Proportional SketchMaking a Proportional Sketch

Proportional Sketch Seven Step Process6. Finish the sketch by darkening the object lines.

Page 97: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

97

Making a Proportional SketchMaking a Proportional Sketch

Proportional Sketch Seven Step Process7. Add dimensions and notes as needed.

Page 98: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

98

Page 99: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

99

Page 100: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

100

Page 101: Sacramento City College EDT 300/ENGR 306 · Presentation Sketches Presentation Sketches Pictorial sketches have a three-dimensional view that can be understood easily by non-technical

101