Sachin Iocl Ppt

Indian Oil Corporation Ltd.,Mathura

SUMMER TRAINING PRESENTATION ON PIPELINE UNIT OF

IOCL( MATHURA REFINARY)

MADE BY: VARSHNEY SACHIN

SHUBHANSHU AGARWAL


CONTENTS

History Mathura Refinery-An Overview Products Pipe Line Products pipeline(MJPL) Crude pipeline(SMPL) Conclusion


HISTORY Indian oil corporation ltd. came into existence

on 1st September 1964 after the merger of Indian Oil Company and Indian refineries ltd.

Indian oil also has the largest network of crude and product pipe lines of 7575 Km across the country .

It was first Indian company to find place in the prestigious list of,’ fortune 500’ companies in Forbes ‘Global 2000’list


Mathura Refinery-An Overview Mathura Refinery the sixth of Indian Oil

Corporation Ltd. was commissioned in January 1982 with an original capacity of 6.0 MMTPA.

It has the wide adaptability of processing over 30 types of crude oils.

The crude to the refinery is received from Salaya in West coast through a dedicated cross country 1078 kms pipeline.


IOCL REFINERY MATHURA


PRODUCTSThe various products of Mathura Refinery are:-

Liquid Petroleum Gas – for domestic use.

Naphtha – for fertilizer as feed.

Aviation Turbine Fuel – for civil and defense aviation purposes.

Superior Kerosene oil – for domestic use.

High speed diesel oil – for transportation.

Furnace oil & heavy petroleum stock – as fuel for industries.

Petrol (Motor Spirit unleaded) – for transportation.

Light diesel oil – for agro equipments.


PIPE LINE Pipelines transport petroleum products from

refineries to demand areas. There are two types of pipelines in Mathura

Refinery- 1- Products pipeline(MJPL) 2-Crude pipeline(SMPL) These pipelines used for direct supply of crude

oil and refined petroleum products to other terminals for marketing.


Products Pipeline(MJPL)

MJPL is used to transfer refined oil to Tundla terminal.

The following is the length of the pipeline in section-S.No. Section Length in km

1- Mathura – Delhi 146.600

2- Delhi – Panipat-Ambala 214.5

3- Delhi – Panipat-Ambala 165.000

4- Sonepat-Meerut 69.940

5- Mathura – Tundla PPL 57.435


RADIO COMMUNICATION IN MJPL In IOCL there are basically three types of communication system used.

Analog UHF system Digital UHF system Optical fibre UHF system

Any of the above communication system can be divided into three parts:-

Radio Unit MUX/DEMUX Exchange


ANALOG U.H.F. SYSTEM

RADIO UNIT


DIGITAL U.H.F. SYSTEM


OPTICAL FIBRE U.H.F. SYSTEM


SMPL SMPL is used to transfer crude oil from Salaya to Mathura. It

is the most important part of Mathura refinery and it cannot be operate without this unit.

Due to this route it is known as SALAYA_MATHURA PIPELINE.

This crude oil fulfills the requirement of three refineries: Panipat Refinery Mathura Refinery Gujrat Refinery


SECTIONS OF SMPL Section Length(Km.) Line

Size(Dia.)Repeater Station

Salaya-Viramgam 274.40 28” 2

Viramgam-Koyali 141.80 18” 3

Viramgam-Caksu 605.80 24” 13

Chaksu-Mathura 197.20 24” 4

Chaksu-Panipat 649.10 24” 6


COMMUNICATION SYSTEMS IN SMPL General communication systems play a vital

role at different stages for information exchange & coordination in successful operation of a cross country pipeline. These stages include:

Start up and shut down of pumps stations. Periodic monitoring of station operational

parameters and adjusting the same to achieve the designed optimum throughputs. Under idle as well as running conditions.


AVIALABLE COMMUNICATION SYSTEMS IN SMPL

VHF walkie talkie sets(130-170MHz) for tanks/tank form operation, ETP operation

VHF(900Mhz) digital communication system in salaya-viramagam-koyali section

Microwave(2.2 GHz) Digital communication System in Chaksu Mathura section.

Digital microwave communication system b/w Viramgam & Sidhpur


(SCADA)

This System helps monitoring & control of pipeline operations from master control station. The monitoring function covers:

Pipeline pressure at all manned station & block valve locations.

Pipeline temperature. Flow measurements at various originating, intermediate &

terminal station & computation of flow rates. Status monitoring of various pumps i.e. Run/stop etc.

different location across the pipeline. Monitoring of individual stations through individual station

P&I diagram represented on the MIMIC


IMPORTANT FEATURES OF TELESUPVISORY CONTROL SYSTEM Data Acquisition Event & alarm notification Normal operating function like alarm acknowledgement

display of pictures, display of alarms & alarms summaries. On demand & period lagging of picture mimics, report etc. Current trend and historic trend. Supervisory control & set pt. function. Support of hot stand by system Support of Management Information System(MIS). Privileged operate functions such as reconfiguration of

variables & graphics. Creation of database & graphics support for connectivity to

other SCADA system


CONCLUSION INDIAN OIL CORPORATION LIMITED is the first Indian

company which comes under FORTUNE 500 companies. At present there are 4 Indian companies-IOCL, BP, HP and

Reliance. It also finds a place of pride among the world biggest enterprises in Forbes ‘2000’ list

It produces almost all petroleum products like petrol, diesel, high speed diesel, naphtha, kerosene, ATF (Aviation Turbine Fuel), different gases(LPG etc.), glycerin, bitumen, propylene, sulphur etc.

Mathura refinery has maximum no. of plants as compare to other Indian Refineries.


REFERENCES:www.iocl.com/www.iocl.com/Aboutus/IndianOilFoundation.aspx

http://en.wikipedia.org/wiki/Indian_Oil_Corporation

www.iocl.com/services/Pipeline.aspxwww.iocl.com/Aboutus/PetroleumProductPipelines.aspx

www.iocl.com/AboutUs/MathuraRefinery.aspx


THANK YOU

Sachin Iocl Ppt

Documents

Transcript of Sachin Iocl Ppt