CCDI 28 August 2013 Tracking Trade: Creative Industries EU/SA Trade Dialogue Baseline Research.
SA Industries, Inc. THIS DRAWING AND ALL INFORMATION …€¦ · 01/19/12 sa industries, inc. title...
2
DRAWN CHECKED ENG APPR MGR APPR UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES NAME TRH DATE 01/19/12 SA Industries, Inc. TITLE SIZE D DWG NO REV 0 FILE NAME: SA-250-RH1-M31.dft SCALE: WEIGHT: SHEET 1 OF 2 REVISION HISTORY REV DESCRIPTION DATE APPROVED SA-250-RH1-M31 MODEL No. SA-250-RH1-M31 NTS THIS DRAWING AND ALL INFORMATION THERON IS THE PROPERTY OF SA INDUSTRIES AND SHALL NOT BE USED, COPIED OR REPRODUCED WITHOUT THE WRITTEN CONSENT OF SA INDUSTRIES. SIDE VIEW TOP VIEW END VIEW .780 1.84 .955 2.795 .751 .463 9.798 4.950 4.950 3.620 ±.001 ISOMETRIC O .660 6.250 5.587 4.455 7.708 5.208 R 1.797 0 16.265 110° PERFORMANCE DATA DISPLACEMENT RANGE 1.97-2.96 Inᶟ/REV DUTY CYCLE INTERMITTENT MAX TORQUE RANGE 48-75 FT-LBS MAX WORKING PRESSURE RANGE 3000 PSI SPEED RANGE 0-2000 RPM ROTATION CW SA-3233 DATA NUMBER OF TEETH 11 OUTSIDE DIA. 2.25 PITCH DIA. 2.00 PITCH 6/8 PRESSURE ANGLE 20° ROOT DIA. 1.71 A DETAIL A 1 1 4 1 2 1 8 6 10 2 9 6 7 1 6 1 3 1 12 1 5 1 Parts List Item Number Description Quantity Part Number 1 SHAFT 1 SA-73-P1 2 BEARING, SEALED 1 SA-75 3 SNAP RING 1 SA-74 4 BASE ADAPTER 1 SA-76 5 DRIVE 1 SA-3233 6 DRIVE HOUSING 1 SA-251-5 7 PILOT BEARING 1 SA-251-11 8 LOCKWASHER 6 SA-251-20 9 BOLT 6 SA-54 10 BOLT 2 SA-6-223 11 LOCKWASHER 2 SA-6-222 12 MOTOR 1 SA3-R100G10-C3 11 2
Transcript of SA Industries, Inc. THIS DRAWING AND ALL INFORMATION …€¦ · 01/19/12 sa industries, inc. title...
DRAWNCHECKEDENG APPRMGR APPR
UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN INCHES
NAMETRH
DATE01/19/12 SA Industries, Inc.
TITLE
SIZE
DDWG NO REV
0FILE NAME: SA-250-RH1-M31.dftSCALE: WEIGHT: SHEET 1 OF 2
REVISION HISTORYREV DESCRIPTION DATE APPROVED
SA-250-RH1-M31
MODEL No. SA-250-RH1-M31
NTS
THIS DRAWING AND ALL INFORMATION THERONIS THE PROPERTY OF SA INDUSTRIES AND
SHALL NOT BE USED, COPIED OR REPRODUCEDWITHOUT THE WRITTEN CONSENT OF SA INDUSTRIES.
SIDE VIEW
TOP VIEWEND VIEW
.780
1.84
.955
2.795.751
.463
9.798
4.950
4.950
3.620 ±.001
ISOMETRIC
O .660
6.250
5.587
4.455
7.708
5.208
R 1.797
0
16.265
110°
PERFORMANCE DATA DISPLACEMENT RANGE 1.97-2.96 Inᶟ/REV DUTY CYCLE INTERMITTENT MAX TORQUE RANGE 48-75 FT-LBS MAX WORKING PRESSURE RANGE 3000 PSI SPEED RANGE 0-2000 RPM ROTATION CW
SA-3233 DATA NUMBER OF TEETH 11 OUTSIDE DIA. 2.25 PITCH DIA. 2.00 PITCH 6/8 PRESSURE ANGLE 20° ROOT DIA. 1.71
A
DETAIL A
11
41
21
86
102
96
71
61
31
121
51
Parts List
ItemNumber Description Quantity Part Number
1 SHAFT 1 SA-73-P1
2 BEARING, SEALED 1 SA-75
3 SNAP RING 1 SA-74
4 BASE ADAPTER 1 SA-76
5 DRIVE 1 SA-3233
6 DRIVE HOUSING 1 SA-251-5
7 PILOT BEARING 1 SA-251-11
8 LOCKWASHER 6 SA-251-20
9 BOLT 6 SA-54
10 BOLT 2 SA-6-223
11 LOCKWASHER 2 SA-6-222
12 MOTOR 1 SA3-R100G10-C3
112
DRAWNCHECKEDENG APPRMGR APPR
UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN INCHES
NAMETRH
DATE01/19/12 SA Industries, Inc.
TITLE
SIZE
DDWG NO REV
0FILE NAME: SA-250-RH1-M31.dftSCALE: WEIGHT: SHEET 2 OF 2
REVISION HISTORYREV DESCRIPTION DATE APPROVED
SA-250-RH1-M31
MODEL No. SA-250-RH1-M31
NTS
THIS DRAWING AND ALL INFORMATION THERONIS THE PROPERTY OF SA INDUSTRIES AND
SHALL NOT BE USED, COPIED OR REPRODUCEDWITHOUT THE WRITTEN CONSENT OF SA INDUSTRIES.
EXPLODED
41
21
11
41
51
71
61 9
6 86
