SA-G-110
1
FORM # G-110 (7/17/22) SHT 1 of 1 SAUDI ARAMCO PRE-COMMISSIONING FORM GEARS EQUIPMENT TYPE: USER REFERENCE: EQUIPMENT TAG NO.: DESCRIPTION: BI/JO NO.: PLANT NO. / LOCATION: REF. DRAWINGS & DOCUMENTS: MANUFACTURER: MODEL NO.: SERIAL NO.: COMMISSIONING DATE: 1 RECEIPT INSPECTION FOR DAMAGES AND SHORTAGES YES____ NO____ 2 SOFT FEET CHECKED. YES____ NO____ 3 INTERNAL ALIGNMENT CHECKED. ( TOOTH CONTACT CHECK WITH BLUING). YES____ NO____ 4 COLD ALIGNMENT CHECKED. YES____ NO____ 5 LUBE OIL SUPPLY PIPING FLUSHED AND CASING CLEANED. YES____ NO____ 6 ALL BLIND FLANGES REMOVED. YES____ NO____ 7 DIRECTION OF ROTATION CHECKED. YES____ NO____ 8 DOWEL PINS INSTALLED. YES____ NO____ 9 COUPLING HUBS ARE INSTALLED PER DWG. YES____ NO____ 10 NAME PLATE DATA PER DWG. YES____ NO____ 11 COUPLING GUARD IN PLACE AND SECURED. YES____ NO____ 12 SHIMS MOUNTED PER SPEC.(MATERIAL, CONFIGURATION). YES____ NO____ 13 TEMPERATURE SENSORS INSTALLED. YES____ NO____ 14 VIBRATION SENSORS INSTALLED. YES____ NO____ NOTE: This non-mandatory form may be used as the starting point to assemble a pre-commissioning checklist. Entries should be revised, added and deleted and approvals adjusted to reflect the needs of the Project Acceptance Committee. APPROVALS SAPMT INSPECTION OTHER DEPT. OPERATIONS Signature & Date Copyright©Saudi Aramco 2009. All rights reserved.
description
precom
Transcript of SA-G-110
GEARS
FORM # G-110 (5/09)SHT 1 of 1SAUDI ARAMCO PRE-COMMISSIONING FORMGEARS
EQUIPMENT TYPE:USER REFERENCE:
EQUIPMENT TAG NO.:DESCRIPTION:
BI/JO NO.:PLANT NO. / LOCATION:
REF. DRAWINGS & DOCUMENTS:
MANUFACTURER:
MODEL NO.:SERIAL NO.:
COMMISSIONING DATE:
1RECEIPT INSPECTION FOR DAMAGES AND SHORTAGESYES____ NO____ 2SOFT FEET CHECKED.YES____ NO____ 3INTERNAL ALIGNMENT CHECKED. ( TOOTH CONTACT CHECK WITH BLUING).YES____ NO____ 4COLD ALIGNMENT CHECKED.YES____ NO____ 5LUBE OIL SUPPLY PIPING FLUSHED AND CASING CLEANED.YES____ NO____ 6ALL BLIND FLANGES REMOVED.YES____ NO____ 7DIRECTION OF ROTATION CHECKED.YES____ NO____ 8DOWEL PINS INSTALLED.YES____ NO____ 9COUPLING HUBS ARE INSTALLED PER DWG.YES____ NO____10NAME PLATE DATA PER DWG.YES____ NO____11COUPLING GUARD IN PLACE AND SECURED.YES____ NO____12SHIMS MOUNTED PER SPEC.(MATERIAL, CONFIGURATION).YES____ NO____13TEMPERATURE SENSORS INSTALLED.YES____ NO____14VIBRATION SENSORS INSTALLED.YES____ NO____
NOTE: This non-mandatory form may be used as the starting point to assemble a pre-commissioning checklist. Entries should be revised, added and deleted and approvals adjusted to reflect the needs of the Project Acceptance Committee.APPROVALSSAPMTINSPECTIONOTHER DEPT.OPERATIONS
Signature & Date
CopyrightSaudi Aramco 2009. All rights reserved.
![CSC 110 Defining functions [Reading: chapter 6] CSC 110 G 1.](https://static.fdocuments.us/doc/165x107/56649f0d5503460f94c21f73/csc-110-defining-functions-reading-chapter-6-csc-110-g-1.jpg)
