S

S.No Ref.No Title

1sCE R&D/DLI-22/CHANDI/2010-2011

PROVN OF CERTAIN OTM ACCN FOR FM UNIVERISITY AT BALASORE (ORISSA)


RENEWAL REPLACEMENT OF BER HT OCB BY HT VCB AT SUB STATION NO 14 PXE CHANDIPUR

3s 8569/E8

REPAIR REPLACEMENT OF US UG CABLES REPLACEMENT OF MCCB LT PANEL BOARD TRANSFORMER AND OTHER ALLIED WORKS AT AGE B/R BALASORE

4s 8570/E8PERIODICAL SERVICE TO CERTAIN BLDGS OF OTM ACCN AND TECH AREA AT CHANDIPUR

5s 8571/E8

PROVISION OF LIGHTENING PROTECTION FIRE FIGHTING SYSTEM AIR CONDITIONING AND CERTAIN ALLIED ELECTRICAL WORKS FOR EXTENSION OF RADAR BUILDING AT ITR TECHNICAL AREA CHANDIPUR

6s 8568/E8PROVISION OF FURNITURE FOR EXTENSION OF RADAR BUILDING AT ITR CHANDIPUR

7s 8561/E8

REPAIR REPLACEMENT OF UNDER GROUND CABLES OF VARIOUS SIZES LT JOINTS TRANSFORMER OIL DEHYDRATION OF OIL PAINTING EARTHING ETC AT LAUNCHNING AREA AND TECH AREA OF ITR CHANDIPUR

8s 8562/E8

REPAIR TO CERTAIN CENTRAL PACKAGE TYPE AC PLANTS AT LAUNCHING AREA AND TECHNICAL AREA OF ITR CHANDIPUR

9s 8563/E8

REPAIR TO CERTAIN UNSERVICEABLE COMPRESSORS OF CENTRAL PACKAGE TYPE AC PLANTS AND VARIOUS SAFETY VALVES AT TECHNICAL AREA AT ITR CHANDIPUR

10s 8564/E8

REPAIR MAINTENANCE OF FIRE PUMPS FIRE HYDRANTS AND ALLIED WORKS AT LAUNCHING AREA AND TECHNICAL AREA AT ITR CHANDIPUR

11s 8565/E8REPAIR TO EOT HOT CRANES AND ALLIED E/M WORKS AT LAUNCHING AREA AND TECHNICAL AREA AT ITR CHANDIPUR

12s 8566/E8 REPAIR TO DG SETS AT LAUNCHING

http://mes.gov.in/tenderdetails.php?tender=49344
















AREA AND TECHNICAL AREA AT ITR CHANDIPUR

13s 8567/E8REPAIR MAINTENANCE OF SECURITY STREET LIGHTS AND ALLIED EM WORKS AT LAUNCHING AREA

14s 8150/R&D/42/E8Provn of certain sanctioned work at TBRL Range Ramgarh


EXTENSION OF CERTAIN TECHNICAL BUILDING AT ITR TECHNICAL AREA CHANDIPUR






Bajanlal Commercial Pvt.Ltd 42,A Shakeshpear Saroni.9831080678 / 033 - 22831570

Amber 38 Chandni Chowk Street.9830145555 / 033 - 22127537

Air son communication 34, Netaji Subhash Road Kolkatta-01 9831204312

Arihant Telemax Pvt LtdNo.1, Chandney Approach Road, Kolkatta-72

9831009887/22127372

Mobile World1/1, Ashutosh Chowdhury Avenue, kolkatta-19

9830775579/22891998

National Radio Products1, Biplabi Anukul Chandra Street, Kolkatta-72

9831047006/22126039

Nuyork Tele World 1, R.N.Mukherjee Road, Kolkatta-01 9830268976

Sourav Telecom 9B, Beadon Street, Kolkatta-06 9330725000

Sanicomm53B, Dr.Lal Mohan Bhattacharjee St. Kolkatta-14

98310446412

Gulmohar24, Raja Lane(P.O.Amar street), Kolkatta-09

9830741956

Title

CLEANING REPAIRING OF SEWAGE LINE, SOAK WALLS, SEPTIC TANKS MANHOLES, SEWAGE SUMP RCC COVER AND REPAIR TO COMPOUND WALL AND DRAINS AT ITR, PXE AND OT ROAD COLONY AT BALASORE

REPAIR MAINT TO COOLING APPLIANCES WTAC, WATER COOLER, REFRIGERATOR, DEEPFIGER, SPLIT TYPE AC, ACQUAGUARD, VOLTAGE STABILIZER ETC FOR PXE TECH



AREA, FP II, EME, NDH SEC HOSPITAL AREA AND MILITARY WING AT CHANDIPUR AND CERTAIN MISC WORKS

REPAIRS TO ROOF SUNKEN FLOOR, SANITRY APPLIANCES, RWP OTM ACCN AT PXE CHANDIPUR

REPAIR MAINT TO INTERNAL ELECTRIFICATION OF MD ACCN INCLUDING REPLACEMENT OF MAIN SWITCH BOARD SECURITY LIGHT ELECTRIC METER WITH BOX AND REPAIR MAINT TO CERTAIN ELECTRICAL FIXTURE AT PXE CHANDIPUR

REPAIR TO FENCING, PCC HARDSTANDING, PATH AT CHANDIPUR

REPAIR MAINT OF STREET SECURITY LIGHT AT ITR, PXE AND OT ROAD BALASORE AND REPAIR MAINT OF SEWAGE PUMP MOTOR, SUBMERSIBLE PUMP MOTOR DG SETS PANEL BOARD, EARTHING, CABLE DUCT, PIPE LINE AND OTHER ALLIED WORKS AT AGE BR BALASORE

REPAIR MAINT OF SUBSTATION AND PUMP HOUSE BUILDINGS INCLUDING FOOTPATH, FENCING AND OTHER ALLIED WORKS AT PXE CHANDIPUR

MANNING OPERATION AND REPAIR MAINTENANCE OVERHAULING OF VARIOUS CAPAICTY OF EOT CRANES INSIDE PXE TECH AREA AND LIFTS AT TTD BUILDING AT ITR INCLUDING CERTAIN EM ALLIED WORKS AT CHANDIPUR

CE R&D/DLI-30/CHANDI/2010-CONSTRUCTION OF GUARD REST ROOM FOR SECURITY PERSONNEL NEAR HELIPAD AT ITR CHANDIPUR

CE R&D/DLI-25/CHANDI/2010-CONSTRUCTION OF GUARD REST ROOMS IN TECHNICAL COMPLEX AT ITR CHANDIPUR

REPAIR REPLACEMENT OF PVC / GI / CI PIPE LINE VALVE AND VALVE PITS










CHLORONOME PLANTS IT PLANT ALLIED WORKS OF WATER SUPPLY AT BALSORE

REPAIR UPGRADATION OF ELECTRICAL WATER SUPPLY AND AIR CONDITIONING PLANTS AT ITR CHANDIPUR

REPAIR REPLACEMENT OLD RUSTED PERISHED GI/CI/DI PIPES U/G PIPE LINES AND RAISING MAINS IN THE MD ACCN AT MOHAN NAGAR PRAKASH NAGAR OTM ACCN AREA AND REPLACEMENT OF GATE VLAVE SLUICE VALVES NRVS AND VALVE CHAMBERS AT PXE CHANDIPUR

REPAIR TO BITUMINOUS ROAD IN ITR TECH AREA AND SITE C APPROACH ROAD ON VARIOUS OPS ALONG RANGE ROAD AT ITR CHANDIPUR

TERM CONTRACT FOR ARTIFICERS WORKS INCLUDING MINOR WORKS FOR PXE TECH AREA CHANDIPUR

TERM CONTRACT FOR ARTIFICERS WORKS INCLUDING MINOR WORKS TECH AREA RANGE ROAD KUMARPUR AND BHIMPUR AT ITR CHANDIPUR

CE R&D/DLI-26/CHANDI/2010-PROVISION OF TROLLY MOUNTED DG SET AND REPLACEMENT OF OCB BY VCB AT PXE CHANDIPUR

CE R&D/DLI-22/CHANDI/2010-PROVN OF CERTAIN OTM ACCN FOR FM UNIVERISITY AT BALASORE (ORISSA)

REPAIRS TO BITUMEN ROAD AT PXE AREA CHANDIPUR

REPAIRS TO JOINERY ATT INTERNAL WATER SUPPY TO TYPE I II & III QTRS AT PXE COLONY BALASORE

REPAIRS TO JOINERY ATT INTERNAL WATER SUPPLY TO TYPE I II & III QTRS AT ITR COLONY BALASORE

PROVISION OF VOLTAGE STABILIZER FOR WINDOW TYPE SPLIT AC AND MISC WORK AT ITR CHANDIPUR

PROVISION OF BOUNDARY PILLARS FOR CONSTRUCTION OF BYPASS













ROAD FROM KUNDA TO PATRAPADA

REPAIR REWIRING REPLACEMENT OF MCB DB ETC AND ALLIED WORKS AT ITR TECH AND LC AREA AT ITR CHANDIPUR

REPAIR TO CERTIN WINDOW TYPE SPLIT TYPE AC WATER COOLER VOLTAGE STABILIZER AT ITR TECH AND LC AREA AT ITR CHANDIPUR

REPAIR REPLACEMENT OF LIGHTING CONDUCTOR AIR TERMINAL EARTHING AND REPLACEMENT OF FLAME PROOF FITTING SUB MAIN WIRING ETC AT TECHNICAL AND LC AREA AT ITR CHANDIPUR

CE R&D/DLI-24/CHANDI/2010-RENEWAL REPLACEMENT OF BER HT OCB BY HT VCB AT SUB STATION NO 14 PXE CHANDIPUR

REPAIRS TO WOODE STEEL, ALUMINIUM PVC JOINERY INCLUDING ROLLING SHUTTER AT PXE TECH AREA CHANDIPUR

REPAIR TO INTERNAL WATER SUPPLY PVC TANK IN MARRIED ACCN AREA AT CHANDIPUR

MAINT OF BR SERVICES AND WELCOME MAINTENANCE TO CERTAIN MARRIED ACCN AND CERTAIN MISC WORK UNDER AGE BR 1 CHANDIPUR

MAINT OF BR SERVICES AND WELCOME MAINTENANCE TO CERTAIN MARRIED ACCN AND CERTAIN MISC WORK UNDER AGE BR-I CHANDIPUR

MAINT BR SERVICE AND WELCOME MAINTENANCE TO CERTAIN MARRIED ACCN AND CERTAIN MISC WORK UNDER AGE BR 1 CHANDIPUR

REPAIR TO INTERNAL WATER SUPPLY PVC TANK IN MARRIED ACCN AREA AT CHANDIPUR

REPAIR TO WOODEN STEEL ALUMINIUM PVC JOINERY INCLUDING ROLLING SHUTTER AT PXE TECH AREA CHANDIPUR












PERIODICAL SERVICES TO MARRIED ACCN AREA AT CHANDIPUR

PERIODICAL SERVICES TO TECH AREA AT PXE CHANDIPUR

REPAIRS TO FALCE CEILING OTM ACCN AND PXE AT CHANDIPUR

REPAIRS TO BOUNDARY WALL INCLUDING PLASTERING AND PERIODICAL SERVICES AT CHANDIPUR

REPAIRS TO STORM WATER DRAIN AND CLEANING OF SEWAGE LINE SEPTIC TANK AT CHANDIPUR

CE R&D/DLI-41/CHANDI/2010-2011

PROVISION OF CYCLE, SCOOTER AND CAR PARKING SHED AT CERTAIN BLDG IN TECH AREA AT ITR CHANDIPUR

2CE R&D/DLI-39/CHANDI/2010-2011

PROVN OF LIBRARY BUILDING AND SHOPPING COMPLEX FOR FM UNIVERSITY AT NAUPADI BALASORE


REPLACEMENT OF UNSERVICEABLE SUMMER APPLIANCES AGAINST BER ITEMS UNDER GE (I) R&D CHANDIPUR


PROVN OF SECURITY LIGHT ALONG THE PERIMETER FENCING AND DG SET AT ITR CHANDIPUR


PROVISION OF SECURITY WALL AT ITR CHANDIPUR

6 8608/E8 CONSTRUCTION OF GUARD REST ROOM FOR SECURITY PERSONNEL NEAR HELIPAD AT ITR CHANDIPUR

7 8609/E8 SPECIAL REPAIRS TO FENCING FOR CERTAIN QUARTERS AT PRAKASH NAGAR CHANDIPUR ESTATE AT CHANDIPUR

8 8610/E8 PROVISION OF CERTAIN MISC WORKS AT GRS III TELEMETRY SYSTEM AT ITR CHANDIPUR

9 8611/E8 REPAIR MAINT TO INTERNAL ELECTRIFICATION OF DIFFERENT TECH ACCN INSIDE PXE TECH AREA AND PXE CHANDIPUR

10 8612/E8 TERM CONTRACT FOR ARTIFICERS WORK INCLUDING MINOR WORKS AT ITR TECHNICAL AREA CHANDIPUR


























11 8613/E8 TERM CONTRACT FOR ARTIFICERS WORKS INCLUDING MINOR WORKS AT MD ACCN AREA CHANDIPUR

12 8614/E8TERM CONTRACT FOR ARTIFICERS WORKS INCLUDING MINOR WORKS MD ACCN ITR COLONY PXE COLONY AND OTM ACCN AT BALASORE

13 8615/E8MANNING OPERATION AND MAINTENANCE OF SEWAGE PUMP HOUSE AT DIFFERENT LOCATION AT PXE CHANDIIPUR UNDER AGE EM I CHANDIPUR

CA NO.GE(I)/R&D/BLS/32 OF 2010-2011

CONTRACTOR:ELECTRO COMMERCIAL CO.

NAME OF WORK:- PROVISION OF LIGHTENING PROTECTION OF FMU NUAPADHI AT BLS.AND MANNING AND OPERATION & MAINTENANCE OF AUTO FIRE DETECTION MANNUAL CALL BELL POINT WITH ALARM SYSTEM UNDER AGE E/M I & II CHANDIPUR.

GENERAL SUMMARY

1. Total amount of Sch ‘A’ Part – I =

2. Total amount of Sch ‘A’ Part – II =

3. Total amount of Sch ‘A’ Part – III =




----------------------

TOTAL

----------------------- ----------------------- ------------------------ CONTRACTOR JE E/M ENG-IN-CHARGE

Dear Sir,As per telephonic discussion with you please note the rate for Tripod Earthingconsisting of 15 MM dia x 2 Mtr. long Cu.Bonded Rod = 3 Nos, X Gel = 20 Kgsand Z Earth = 40 Kgs and Brass Clamp = 3 Nos = Rs. 35550.00 per set. RegardsRajiv ChhariaM: +91 98312 78144Email: [email protected] / [email protected] Mahavir Industrial Corpn.55, Ezra Street, 4th Floor,Kolkata - 700 001. W.B.Ph: 033 - 2234 1693 / 2235 3627Fax: 033 - 2234 1693 / 3985 1238

Sector

Telecommunication Services / Equipments

Location: Orissa - India

Tender Value: 23 Thousand (approx.) Closing Date: 10 - Nov - 2011 Ref.No: 3669733

Replacement of battery & periodical maintenance of 30 KVA Diesel Engine Alternator set at T.E.Building. Get Tender Liaison Service | Set Alert 4 Result | Sub Contracting/JV/Consortium Opportunities

2 Sector Power Plant Location: Orissa - India

Tender Value: 24.21 Lakhs (approx.) Closing Date: 08 - Dec - 2010 Ref.No: 3677487

1.Re-metalling in 220/132/33KV grid S/S . 2.Special repair to truck ORD-2358 (TATA) making of new-dala, cabin along with repair of truck. Get Tender Liaison Service | Set Alert 4 Result | Sub Contracting/JV/Consortium Opportunities

3 Sector Canal/Irrigation Work Location: Orissa - India

http://generator.tendertiger.com/viewvascompany.aspx?srno=5035387


http://generator.tendertiger.com/tenderviewnotallowed.aspx?id=2&tp=1&SrNo=5035387

http://generator.tendertiger.com/getserviceinfo.aspx?svid=12&srno=5035387

http://generator.tendertiger.com/Subscription.aspx?id=2&d=1&tt=&SrNo=5035387










Tender Value: 5.60 Lakhs Closing Date: 08 - Dec - 2010 Ref.No: 3677053

Execution of head works & distribution system including installation of pump, starter, panel board, including supply of required materials such as erection of electric sub-station, drawl of HT/LT electric line providing 3phase energy meter for each L.I.Projet with inspection, testing and commissioning and effect power supply including energisation of the Project and making it full functional & handing over to respective Pani Panchayat. Get Tender Liaison Service | Set Alert 4 Result | Sub Contracting/JV/Consortium Opportunities


Tender Value: N.A. Closing Date: 07 - Dec - 2010 Ref.No: 3679876

Supply of All materials & equipments, its installation including all type civil works, testing & commissioning & maintenance for capacitor banks of different MVAR (10, 15 & 20) rating in OPTCL system at different grid substation in 4 packages, on turnkey basis. Get Tender Liaison Service | Set Alert 4 Result | Sub Contracting/JV/Consortium Opportunities

5 Sector Security Services Location: Orissa - India

Tender Value: 90 Lakhs Closing Date: 06 - Dec - 2010 Ref.No: 3650836

Provision of Security light (along the perimeter fencing) & diesel generator set at ITR. Get Tender Liaison Service | Set Alert 4 Result | Sub Contracting/JV/Consortium Opportunities

6 Sector Canal/Irrigation Work Location: Orissa - India

Tender Value: 11.40 Lakhs Closing Date: 04 - Dec - 2010 Ref.No: 3677367

Execution of head works & distribution system including installation of pump, starter, panel board, including supply of required materials such as erection of electric sub-station, drawl of HT/LT electric line providing 3phase energy meter for each LI Projet with inspection, testing, commissioning & effect power supply including energisation of the Project and making it full functional & handing over to respective Pani Panchayat. Get Tender Liaison Service | Set Alert 4 Result | Sub Contracting/JV/Consortium Opportunities


Tender Value: 70 Lakhs Closing Date: 03 - Dec - 2010 Ref.No: 3663239

Supply, installation, testing & commissioning of Diesel generator set of 750 +-5% KVA capacity with assorted equipments. Get Tender Liaison Service | Set Alert 4 Result | Sub Contracting/JV/Consortium Opportunities






































Products Exporting and Supplying and Trading

and Manufacturing

Ground rods, earth rods, earth electrodes, copper bonded rods, couplers, earth enhancing compound, clamps, earthing systems connectors, weld powders, handle clamps, graphite moulds, flint igniters, early streamer emission devices, surge arrestors, testers, counters, safe earthing electrodes, power l...

Services Design, installation, commissioning, project management, turnkey projects - of lightning protection systems, surge protection systems, maintenance free earthing solutions, exothermic welding, electronic safety systems, electrical safety systems, substation design, substation erection, substation ins...

Product Showcase

Lightning TestersLightning Testers We offer Lightning Testers that are used to check active heads and indicate OK or FAULT with the help of red or green LED. The

http://www.esuppliersindia.com/mcml-protection-technologies-pvt-ltd-/lightning-testers-pr271633-sCATALOG-swf.html

connection cable of these Lightning Testers can be ......

More ...

Lightning DevicesLightning Devices We offer a wide range of Lightning Devices in different dimensions. These devices are widely used in various industries like railways, telecom companies, sub stations, power plants ......More ...

Copper Bonded RodCOPPER BONDED EARTH RODS - UNTHREADED & POINTED - DOUBLE SIDE THREADED 1. Cold drawn steel core complies with ASTM-A-370 2. Tensile strength no less than 80, 000 lbs, per sq. inch-PSI 3. Steel ......

More ...

CouplerCouplers We are manufacturer and supplier of Couplers that are used when more than one electrode is required to be driven. These thread less compression type couplers are made up of brass.

More ...

http://www.esuppliersindia.com/mcml-protection-technologies-pvt-ltd-/coupler-pr276010-sCATALOG-swf.html

http://www.esuppliersindia.com/mcml-protection-technologies-pvt-ltd-/coupler-pr276010-sCATALOG-swf.html

http://www.esuppliersindia.com/mcml-protection-technologies-pvt-ltd-/lightning-devices-pr276014-sCATALOG-swf.html




http://www.esuppliersindia.com/mcml-protection-technologies-pvt-ltd-/copper-bonded-rod-pr169519-sFP-swf.html

http://www.esuppliersindia.com/mcml-protection-technologies-pvt-ltd-/copper-bonded-rod-pr169519-sFP-swf.html

http://www.esuppliersindia.com/mcml-protection-technologies-pvt-ltd-/lightning-testers-pr271633-sCATALOG-swf.html

Earth Enhancing CompoundsEarth Enhancing Compounds We offer Earth Enhancing Compounds that produces a gel having high conductivity in the electrode area and reduces the resistivity of the earth. These non-corrosive Earth ......

More ...

Weld PowderWeld Powder We manufacture, supply and export Weld Powder which is melted along with steel disc from the weld. Weld Powder is available in different packings and widely used in industrial applications ......

More ...

View All Contact Details

Company Name : McML PROTECTION TECHNOLOGIES PVT. LTD.

Address : 1-19-80/42, Vijaypuri Colony, Opp. Canara Bank, Sainikpuri, Secunderabad - 500062, Andhra Pradesh , India

Contact Person : Mr. LAKKAKULA VIJAY KUMAR (Vice President - Marketing & Sales)

Phone : 91-40-40120134

Mobile : +919704456802

Fax : 91-40-40120478

ELECTRO COMMERCIAL CO.H.O:27,WESTON STREET ROOM NO.307 KOLKATA-700 012

PH:9040449711,FAX 033-26662592B.O:CHANDIPUR,BALASORE

http://www.esuppliersindia.com/mcml-protection-technologies-pvt-ltd-/products-p2297149-u1958749-swp-nl.html

http://www.esuppliersindia.com/mcml-protection-technologies-pvt-ltd-/weld-powder-pr271644-sCATALOG-swf.html

http://www.esuppliersindia.com/mcml-protection-technologies-pvt-ltd-/weld-powder-pr271644-sCATALOG-swf.html

http://www.esuppliersindia.com/mcml-protection-technologies-pvt-ltd-/earth-enhancing-compounds-pr276008-sCATALOG-swf.html



http://www.esuppliersindia.com/inquiry/send_inquiry.html?ids=ID_2297149_1958749___END&inquiry_source=ESUPPLIERS_INDIA

PH:06782 272466

ToMr Sayak Das,

We want your best quotation for undermentioned items,delivery at CHANDIPUR,BALASORE.

1. ISI marked sluice valve flanged type 100 mm dia with brass spindle cast iron wheel grade PN 1.6

2. ISI marked sluice valve flanged type 80 mm dia with brass spindle iron wheel grade PN 1.6

3. All are same but size of sluice valve is 65 mm dia PN 1.6

4. Gun metal gate valve 50 mm dia with iron wheel lead,screwed both ends for iron pipe.

5. Gun metal gate valve 40 mm dia with iron wheel head,screwed both ends for iron pipe

6. Non returning valve 100 mm dia .

7. Non returning valve 80 mm dia .

8. CI foot valve of size 200 mm dia

9. CI foot valve of size 150 mm dia with GM working parts as per IS – 4038 .

10. CI foot valve of size 100 mm dia with GM working parts as per IS – 4038.

11. ISI marked sluice valve, both end flanged with Gun metal spindle and hand wheel , class PN 1.0

a.150 mm dia.b.100 mm dia.c. 80 mm dia.

SANJAY KEDIA 09040449711

UPADHAYA VALVES MFRS.PVT.LTD.

AN ISO 9001:2008 COMPANY

Q U O T A T I O N

FOR ANY PROBLEM FEEL FREE TO CALL OUR CHIEF BUSINESS COORDINATOR (MR. AMIT PANDEY) ON 09554630347 OR WRITE ON EMAIL ID: [email protected]

OUR REF: RNB/10-11/2252 DATE: 27-01-2011

REF : VERBAL DATE: 27-01-2011

TO: ELECTRO COMMERCIAL COMPANY., BALASORE, ORISSA.

KIND ATTN : MR. SANJAY KEDIA

WE QUOTE BELOW OUR COMPETITIVE PRICES:-

SL. NO.

DESCRIPTION SIZES QTY (NOS.)

RATE EACH IN ` TOTAL IN `

1 C.I. D/F Sluice Valve Non- rising spindle as per IS: 14846-2000, PN-1.0, Flanged drilled as per IS: 1538 with C.I. Hand Wheel.M.O.C.:- Body; Wedge; Bonnet; Cover; and Gland - C.I. IS: 210 Fig. 200, Body Seat ring; Wedge Seat ring; and Wedge Nut - G.M. IS: 318 LTB-2, Spindle – Brass.

65 mm 4 3,920.00 15,680.00

80 mm 2 4,030.00 8,060.00 100 mm 2 5,445.00 10,890.00

2 G.M. Gate Valve Screwed End, as per IS: 778M.O.C.:- Body; Disc; Bonnet - G.M. IS: 318 LTB 2, Spindle – Brass.

40 mm 4 2,225.00 8,900.00 50 mm 4 3,470.00 13,880.00

3 C.I. D/F Non return Valves as per IS: 5312 (Part-I) PN – 1.0M.O.C.:- Body; Disc; & Hinge - C.I. IS: 210 Fig. 200, Seat ring - G.M. IS: 318 LTB-2, Door Face - Nitrile Rubber, Hinge Pin - S.S. 410.

80 mm 2 3,220.00 6,440.00 100 mm 2 4,290.00 8,580.00

4 C.I. Foot Valves Flanged ends, Lift type as per IS: 4038-86, Flanged drilled as per IS: 1538 M.O.C.:- Body & Strainer - C.I. IS: 210 Fig. 200, Working parts – G.M. IS: 318 LTB-2.

100 mm 2 4,420.00 8,840.00

150 mm 2 6,420.00 12,840.00

200 mm 2 11,340.00 22,680.00

TOTAL ` 116,790.00

TERMS AND CONDITIONS:1) PRICES: EX-FACTORY, HOWRAH (W.B.).

2) FREIGHT CHARGE: EXTRA @ 5%.

3) PACKING & FORWARDING: EXTRA @ 5%.

4) INSURANCE & OCTROI: EXTRA @ ACTUAL CHARGED.

5) CENTRAL EXCISE DUTY: 10.3% WILL BE CHARGED EXTRA.

6) TAXES: 2% WITH 'C' FORM /4% WITHOUT 'C' FORM WILL BE CHARGED EXTRA.

7) DELIVERY PERIOD: WITHIN 45 TO 60 DAYS FROM THE DATE OF RECEIPT OF YOUR FORMAL ORDER.

8) PAYMENT: 20% ADVANCE WITH ORDER, BALANCE AGAINST PROFORMA INVOICE BEFORE DESPATCH.

9) DRAWING: GA DRAWING WILL BE SUBMITTED WITHIN 15 DAYS FROM THE DATE OF RECEIPT OF YOUR FORMAL ORDER FOR YOUR APPROVAL.

10) INSPECTION: 3RD PARTY INSPECTION WILL BE PROVIDED AT OUR WORKS AT HOWRAH BEFORE DESPATCH AT BUYER'S COST.

11) VALIDITY: ONLY ONE MONTH FROM THE DATE OF QUOTATION

12) NOTE : ORDER WILL BE ONLY VALID AFTER OUR ACCEPTANCE ACKNOWLEDGEMENT.

REGARDS, R. N. BANERJEE (09830689653)MARKETING & SALES DIVISION UPADHAYA VALVES MFRS. PVT. LTD., 23A, NETAJI SUBHAS ROAD, KOLKATA-700 001PH: 033 22303388/22309598/22309766, 22621378/22315342FAX:033 22305444 Email: [email protected]; [email protected]: www.upadhayavalves.net

VAT.Reg.No.19460158043, C.S.T.Reg.No.19460158237THIS QUOTATION IS SUBJECT TO CALCUTTA/HOWRAH JURISDICTION.

UVM/SALES/F72-01 R-0

mailto:[email protected]

ELECTRO COMMERCIAL CO. (APPROVED CONTRACTOR OF MES)

H.O:27,WESTON STREET ROOM NO.307 KOLKATA-700 012PH:9331043116 FAX 033-26662592

B.O:CHANDIPUR,BALASOREPH:06782 272466

Date:06.12.10ToSri P.K.Mitra(V.P.Engg.)Birla TyreBalasore

Sub:-Early Streamer Emmission Lightning Arrestor Model PREVECTRON -2Dear Sir,

We would like to introduce ourselves as the dealer of “INDELEC” World’s No.1 LightningProtection System.

INDELEC is the first ISO 9001 certified Company in its field & is manufacturing one of the most advanced & effective Lightning Protection System having its head office at DouaiFrance and exporting its products in over 80 countries around the world.

INDELEC is manufacturing PREVECTRON -2 Early Streamer Emmission (ESE) Lightning Arrestor since 50 years & has passed all the required tests meant for Lightning Arrestor.It has been tested under real lightning conditions and also been approved by CPRI, Bangalore.

PREVECTRON-2 is also approved by ENGR-IN-CHIEF’S Branch Vide Their Latter No.43285/CMPT/10/DES-2 Dated :05/12/2006.

It has been installed in India in major places like Defence area at ITR CHANDIPUR,RELIANCE IND.,TATA MOTORS,JINDAL VIJAYNAGAR,LARSEN & TOUBRO LTD,RED FORT IN DELHI,INDIAN MILITARY,Major high rise Buildings,Bridges,Telephone Towers,I.T.Parks and Airports at SURAT,BANGALORE,KOLKATA.

Sir, We shall be highly obliged if you kindly allow us to give a demonstration of our Product as per your conveyance, to enable us to Furnish you the complete detail of PREVECTRON-2Thanking You,

Your’s Faithfully, For Electro Commercial Co.




Date:06.12.10ToSri B.D.Routray(SR.Manager Electrical)Birla TyreBalasore












Date:06.12.10ToSri P.K.Karan G M (Commercial)Birla TyreBalasore












Date:06.12.10ToSri P.K.Mitra(V.P.Engg.)Birla TyreBalasore









nders Under Chief Engineer ( CE (R&D) DELHI ) Tenders Contracted by GE (I) R&D CHANDIPUR S.No Ref.No Title 1 CE R&D/DLI-46/CHANDI/2010-2011 PROVISION OF DEFICIENT TYPE III MARRIED ACCOMMODATION AT CHANDIPUR 2 8627/E8 REPAIR / REPLACEMENT / OVERHAULING OF 10 TON 5 TON 3 TON EOT CRANES AND REPLACEMENT OF GEAR OIL TRANSFORMER OIL UNSERVICEABLE STEEL ROPES THRUSTER COIL ML CONTRACTORS BACK LIGHT FUSES BREAK SHOES OVER HAULING OF GEAR BOXES AND PAINTING TO EOT CRANES AT PXE CHANDIPUR 3 8628/E8 REPAIR / OVERHAULING OF FIRE FIGHTING D SETS REWINDING OF ALTERNATOR REPLACEMENT OF BURNT OUT ENGINE OIL REPLACEMENT OF B CHECK AND REPAIR / MAINT OF MANUAL CALL POINT SYSTEM AT AUDITORIUM BLOCK HOUSE AYUDH BHAWAN AND MAGAZINE AREA AT PXE CHANDIPUR 4 8629/E8 REPAIR / MAINT OF STREET / SECURITY LIGHTS PAINTING TO POLES REPLACEMENT OF UG CABLES POLE JUNCTON BOXES AT MD ACCN AREA PXE TECH AREA AND REPAIR MAINT OF LIGHTNING CONDUCTORS AT PXE TECH AREA MAGAZINE AREA UNDER AGE EM I CHANDIPUR 5 8630/E8 REPAIR / REPLACEMENT OF RAISING MAINS AT VARIOUS OFFICERS / JCO / ORS MD ACCN AT PXE CHANDIPUR 6 8631/E8 SPECIAL REPAIR TO MT BATTERY CHARGING BLDG NO P 244 AT CHANDIPUR 7 8620/E8 REAIR TO WATER SUPPLY DISTRIBUTION LINES SLUICE VALVES NRVS FOOT VLAVES UNDER PXE TECHNICAL AREA AT PXE CHANDIPUR AND REPAIR / MAINT OF FIRE FIGHTING PUMPS REPLACEMENT OF WORNOUT IMPELLERS BEARINGS SHAFTS WINDING OF MOTORS INCLUDING REPLACEMENT OF DAMAGE MS PIPE LINES NRVS SLUICE VALVE REPAIR TO FIRE HYDRANT BOXES GUNMETAL LANDING VALVES GM NOZZLES AND PAINTING TO PUMPS AND MOTORS CLEANING OF FIRE STATIC TANKS AT PXE CHANDIPUR 8 8619/E8 REPAIR / MAINT OF STREET / SECURITY LIGHT / WATCH TOWER LIGHT AND OTHER ALLIED WORKS OF MAGAZINE PXE TECH AREA AND FP II UNDER PXE CHANDIPUR AND REPAIR / MAINT OF SECURITY LIGHT OF MD ACCN AREA CHANDIPUR 9 8618/E8 REPAIR / MAINT TO INTERNAL ELECTRIFICATION AND REPLACEMENT OF FLAME PROOF LIGHT FITTINGS AT MAGAZINE BUILDING AND TECH ACCN UNDER PXE CHANDPUR AND CERTAIN MISC WORKS AT PXE CHANDIPUR 10 8621/E8 REPAIR / MAINT OF CENTRAL AC PLANTS AT BALASTIC CENTRE, BLOCK HOUSE ADDITORIUM AYUDH BHAWAN AND AP LAB INCLUDING REPAIRS TO AHUS CHILLED WATER PIPING AND OVERHAULING OF COMPRESSORS REPLACEMENT OF FILTERS AT PXE CHANDIPUR 11 8625/E8 PROVN OF COVERED SHED AND ROOMS AT EXISTING STAGE AT ITR COLONY BALASORE

CERTIFICATE FOR DEDUCTION OF TAX AT SOURCE FOR THE YEAR 2009-10












( See Rule 59) D D

M M Y Y Y Y

03. Name and address of the Dealer

M/s ELECTRO COMMERCIAL CO.Chandipur,Balasore.

04 Nmae,address and status of the Authority making the deduction GE(I) R&D Chandipur

05 Name and address of the dealer (work contractor from whose Bills/Invoices,deduction has been made)

M/s ELECTRO COMMERCIAL COCHANDIPUR,BALASORE

06 If the dealer(works contractor)has opted for payment of composition money in lieu of VAT,the order No.& dt.& the Sales taxauthority,who has issued the order for deduction of tax source.

-Nil-

07 Work Order / Contract number in respect of the which, tax isDeducted at source

Work Order/Contractor No.GE(I)R&D/BLS/53 of 2009-10 dt.29.03.10Gross value of work Rs.560000/-

08 Gross value of the works contract,in respect of which part of fulPayment is being made--------------the amount of payment made

FULL560000/-

PART

09 Gross amount of the Bill/Invoice in respect of which payment isBeing made including the Bill/ Invoice number

Bill / Invice No.

Date Amount

15/1203 10/3/10 560000/-10 Amount of Sale Tax deducted Rs. 22914/-

11 Name of the Treasury in which the amount deducted has beenDeposited

Sales Tax Officer,Balasore

12 Treasury Challan No. / Date

13 Demand draft number and date,if payment has been madeThrough crossed demand draft

No. dt.

14 When consolidated payment is made in respect of the tax deducted at source from more than one works-contractors,the statement showing the name,address,TIN of such contractors,gross valuof the invoice,the amount of tax deducted at source to be enclos

DD No. dt.Of Branch of Bank.

15. DECLARATION:Certified that an amount of Rs.22914.00(Rupees Twenty two Thousand Nine Hundred Fourt een Only)has been Deducted from the bill /invoice of the works-contractor mentioned above in respect of part / full execution of the works Contract and has been deposited into the Government Treasury or paid through crossed Demand Draft.

Date: Signature (Deducting authority) Seal

Note: 01.The deducting authority making the deduction shall send a copy of the certificate along with a copy of the Treasury Challan/ crossed D D to the concerned Sales Tax Officer/Assistance Commissioner Sales Tax.02.The deducting authority making deduction shall send a copy of the certificate to the works Contractor from whose bill/invoice the deduction has been made.

02.Office address of the issuing authority

Garrison Engineer (I) R& D Chandipur,Balasore.

- -02 TIN 2 1 2 5 1 5 0 3 5 5 5

Dear Sir,

We are pls to quote-

1.VLE Fuse carrier with fuse of capacity 200 AMP.Make: MEI Rs=25,000=00.Each.{attached scan catalogue}.

2.HT HRC Fuse of 63 AMP for VLE of capacity 200 AMPMake:GE/Bussman Rs=2,600=00.each{there is no catalogue for the same}

Terms & Condition- A.Vat/Cst@4%. B.Delivery ready stock. C.Payment proforma invoice. D.Delivery charges exta as applicable. With Regards.K.K.Jhunjhunwala.Motors & Controls.55,ezra streetkolkata 700001.fax-2235-6300.22353609/9702.f

http://www.rediffmail.com/cgi-bin/red.cgi?red=http%3A%2F%2F2.ht%2F&isImage=0&BlockImage=0&rediffng=0

CA-NO.: GE ( I )/ R & D/ BLS 32 OF 2010-2011

Name of work: Provision of lightining protection of FMU nuapadhi and balasore & manning and operation & maintenance of auto fire detection manual call bell Point with alarm system under AGE E/M –I & II at chnadipur.

Contractor:ELECTRO COMMERCIAL CO.

The above contract amount has I,II,III parts.and the total CA amount is Rs.8,08,794.00

1.The part I is Manning & operation work at chandipur & the amount is Rs.2,06,910.00

2.The part II is also Manning & operation work at chnadipur and the Amount is Rs.2,05,389.00

3.The III and last part is Lightining protection work at Nuapadhi And the amount is Rs.3,96,495.00

--------------- Total amount is Rs. 8,08,794.00 ---------------


CHANDIPUR,BALASOREPH:9040449711

PH:06782 272466

ECC/BLS/09927 th JAN 2011

ToAssistance Labour Commissioner,Balasore.

Through GE ( I ) R & D Chandipur,Ref.no.8406/54/E8 Dated:12/01/2011

Sir, This is regarding recovery of welfare cess from my account. Sir we have undertaken a contract

Repair / Maintenance of street / security light of MD. Accod. Area and repair / maint of street

security light of CA No.GE (I) / R&D/ BLS / 53 OF 2009-10, amounting to Rs.1287580/= under

GE ( I ) R & D Chandipur. During currency of the contract i.e 20th OCT 2009 to 19th APR 2010.

I have not employed more then 8 labours which implies that exemption of welfare cess from my

Contract .But unfortunately Rs.12876/= was recovered from our contract,on dated 26th NOV 2010

& Demand Draft no.305475, consolidated dd amount of Rs.158169.00 was handed over to you.

Therefore,we request for your kind honour,refund the cheque amounting Rs.12876/= may be

Issued in form of “Electro Commercial Co”.Balasore.

Thanking you,

Yours faithfully,

For Electro Commercial Co.

Enclo:GE letter copy & GE certified copy




2nd REMINDER

REF:ECC/BLS/141

DATE:24 th MAR2011

CA NO.:GE(I)/R&D/BLS/82 OF 2008-09

SUB:Payment of FB Voucher No.19/1072/EM, DATED 06/08/09

Name of work:Repair/Replacement of VCB,OCB of HT electric System at ITR Tech area & LC area of ITR chandipur.

Respected Sir,

You are requested to clear the payment of final bill of the above contract at the earliest as possible.

Thanking you,

Yours faithfully,

For Electro Commercial Co.


H.O:27,WESTON STREET ROOM NO.307 KOLKATA-700 012 PH:9331043116 FAX 033-26662592

B.O:CHANDIPUR,BALASORE PH:06782 272466

REF:ECC/BLS/115

DATE:31 st JAN 2011

M/s Electrosteel Castings Ltd,Camac Street,Kolkata.

Ref:Your letter no.SPS:ENQ:DI:51:2648, Dated January 19,2011

Kind Attn: Mr.S.S.Bagchi

Dear Sir,

Please deliver us the following materials at your earliest and send us the performa invoice so that we

Can send the cost of the same.

1. DI PIPE OF SIZE 100 MM DIA (CLASS K-7) QTY.132 RM @ Rs.660/= Per Mtr.2. DI PIPE OF SIZE 150 MM DIA (CLASS K-7) QTY.110 RM @ Rs.945/= Per Mtr.

Our TIN No.21251503555, The rates are ex- kolkata and the Colour of the pipes will be black.

Thanking you,

Yours faithfully,

SANJAY KEDIA( 9040449711 )

MY E-MAIL ID : [email protected]

DATED 14/02/2011

OFFER (CROMPTON GREAVES LTD)

1. SSGN 1215IH - @5135.00

2. SSGN 1125 IH @6395.00

3. FHD 1524 @6595.00

4. CG 12240S(CA)@11220.00

5. SPT 1107IL/BM/WI @4800.00

6. CFBL 1218 - DISCONTINUE

7. SPT 1107IL/BM/WI @4800.00

8. SSLT 25 @5450.00

LESS – 55%

OFFER (BAJAJ ELECTRICALS LTD)

1 BGEST 150 SV @5440.00

2.BGEST 250 [email protected]

3. BJENF 24 @5800.00

4.BJCG 2X400 SV/MH CA @10250.00

5 BJDPTI 70 SV @4460.00

6 BRPTCI 118 CLEAR @2660.00

7.BNCL 70 SV O @10055.00

8. BJODCI 250 SV @10030.00

LESS – 55%

HID LAMPS (CROMPTON GREAVES LTD)

SON E 70 WATT @ 150.00

SON E 150 WATT @230.00

SON E 250 WATT @255.00

SON E 400 WATT @ 330.00

SON T LAMP 70 WATT @165.00




M/H LAMP 70 WATT (E) 510.00

M/H E LAMP 150 WATT E – 565.00

MH LAMP 250/400 (T) – 565.00

MH E LAMP 250/400 WATT – 680.00

TERMS & CONDITIONS

A – PAYMENT 100 % AGNST PROFORMA INVOICE

B – DELIVERY – 5TO 6 WEEKS

C TAX – 13.5% OR CST 2% AGNST C FORM

D – FOR KOLKATA

REGARDS

K.C.MOHTA

ANIL GUPTA

98304-55700

Subject: re ; Clarification From: fireshield <[email protected]> Wed, 16 Feb 2011 11:44:57 To: You Show full Headers To The Garrison Engineer (I) R&D,Chandipur, Balsore, Orissa.

Dear Sir,

Ref : Contact person from Electro Commercial Co., Mr. Sanjay Kedia.

Subject : Fire Hydrant Hose Box of Size 800 x 650 mm x 300 mm with 3 mm thick GI Sheet. support of angle iron 40 mm x 40 mm x 6 mm thick angle iron support of 4 legs at least 1.5 mtrs height including grouting with PCC.

With reference to above we bring into your kind notice that the standard size of Hose box is 30 x 24 x 10 inches (750 x 600 x 250 mm ) Thickness is maximum 16 swg sheet. Hence we request you to reconsider the same and change the specifications.

The hose box are manufactured with standard dices / forma hence we cannot deviate from the same.

Thanking you,

yours truly, For Fireshield Engineers (I) limited, B.K. Dave.

TAHER BROTHERS81, N.S ROADKOLKATA – 700 001PH: 033-22432105/22432727 FAX:033-22423798EMAIL: [email protected]: 18/02/2011To,Mr. Sanjay KediaGE (I) R & D ChandipurDear sir,With reference to your enquiry sent by mail we are pleased to quote the following:-

DESCRIPTION QUANTITY RATE/MTR

M.S Black Tata Pipe 200mm X 6.35mm thick P/E 15.00 Mtrs - 1810.00M.S Black Tata Pipe 150mm X 5 mm thick P/E 15.00 Mtrs - 1040.00M.S Black Tata Pipe 100mm X 5 mm thick P/E 20.00 Mtrs - 700.00M.S Black Tata Pipe 80mm X 4.5 mm thick P/E 20.00 Mtrs - 490.00

M.S Black Jindal Pipe 200mm X 6.35mm thick P/E 15.00 Mtrs - 1740.00M.S Black Jindal Pipe 150mm X 5 mm thick P/E 15.00 Mtrs - 990.00M.S Black Jindal Pipe 100mm X 5 mm thick P/E 20.00 Mtrs - 680.00M.S Black Jindal Pipe 80mm X 4.5 mm thick P/E 20.00 Mtrs - 450.00

M.S Black Bansal Pipe 200mm X 6.35 mm thick P/E 15.00 Mtrs -1672.00M.S Black Bansal Pipe 150mm X 5 mm thick P/E 15.00 Mtrs - 900.00M.S Black Bansal Pipe 100mm X 5 mm thick P/E 20.00 Mtrs - 620.00M.S Black Bansal Pipe 80mm X 4.5 mm thick P/E 20.00 Mtrs - 415.00

Terms & Conditions:-

CST Extra 4% Delivery Charges Extra Ready Stock

Yours faithfully

CHIEF TENDER GONE 10,65,000.00,OUR RATE IS 18,00,000.00Dear Sir,Kindly need your best quotation for under mention item:

1.TRANSFORMER CAPACITY 500 KVA,STEP DOWN INDOOR TYPE 50 CYCLES PER SECOND (50 HZ) AC OIL IMMERSED, AIR NATURALLY COOLED(ONAN TYPE),WITH EXTERNAL COOLING TUBES/RADIATORS,CORE TYPE HAVING NO LOAD RATIO 11 KV/433 VOLTS CORRESPONDING TO PRINCIPAL TAPPING, DOUBLE COPPER WOUND.DELTA CONNECTION ON PRIMARY SIDE(HV SIDE) & STAR CONNECTION ON SECONDARY SIDE(LV SIDE) IN ACCORDANCE WITH VECTOR SYMBOL DYN-11(VECTOR GROUP-4)WITH NEUTRAL BROUGHT OUT ON LV SIDE & HAVING TAPPING ON HV SIDE FOR CONSTANT OUT PUT, SO AS TO ALTER / VARY SECONDARY VOLTAGE FROM (-) 7.5 % TO (+) 7.5 % IN STEPS OF 2.5% BY MEANS OF MANNUAL OFF LOAD TAPS CHANGING ARRANGEMENTS WITH THE LIMIT OF TEMPERATURE RISE AFTER CONTINUES FULL LOAD RUN AS SPECIFIED IN IS –2026(PART –I)-1977, SHALL BE ADJUSTETD SUIT THE MAXIMUM AMBIENT TEMPERATURE OF 50’C PREVALLING AT SITE ALL AS .

THE TRANSFORMER SHALL BE COMPLETED WITH FOLLOWING FITTINGS & ACCES

A.Oil conservator tank with filling hole & cap,drain valve & oil level gauge.

B.Silica gel breather with connecting pipe including first fill of dehydrating agent.

C.Explosion relief mounted on tank with double diaphragm & equalizer pipe connected to Conservator air space(pressure release valve)

D.Air release plug.

E.Oil temperature indicator(gauge) having range 0’C-120’C with maximum reading pointer 100 mm dia including shut off valve between the conservator & main tank.

F.Thermometer pocket.

G.Drain valve with threaded adopter.

H.Filter valve with threaded adopter(top & bottom).

I.Sample valve.J.Inspection cover.K.Cover lifting eyes.L.Wheels.M.Rating plate & terminal marking plate.N.Extra bushing for neutral brought out side(LV side).

O.First filling of transformer oil to appropriate level including cost of oil & testing with desired Dielectric strength confirming to IS335-1993.

P.Hand hole of sufficient size to assess the interior of the tank.

Q.One cable box on HV side(11 KV side)suitable for XLPE cable 95 sqmm 3 core.R.Provn. of connecting of trunk bus bar on LV side with chamber including jointing with nut boltS.Earthing terminals.

CHIEF TENDER,GONE AT RS.10,65,000.00,OUR RATE IS 18,00,000.00 Dear sir,

Kindly need your best quotation for the under mentioned item,

HT 11KV, 3PHASE, 50HZ, INDOOR TYPE, OUTGOING PANEL TOTALLY ENCLOSED METAL CLAD SWITCH GEAR COMPLETE WITH VACUUM CIRCUIT BREAKER HAVING RUPTURING CAPACITY 250 MVA , OVERLOAD & EARTH FAULT PROTECTION, AMPMETER. VOLTMETER & RATING UP TO 400 AMPS WITH INDEPENDENT SPRING CHARGING TYPE MOTOR & MANUALLY OPERATED MECHANISM INCLUDING MOTOR OF 230 VOLT, SINGLE PHASE AC WITH 30 VOLT DC SHUNT TRIP COIL WITH AUXILIARY SWITCH MECHANICAL ON/OFF INDICATOR WITH PROTECTIVE RELAY & FOLLOWINGS:-

1. CURRENT TRANSFORMER ONE SET OF THREE OF RATIO 50/25/5/5 AMPS HAVING 15 VA BURDEN FOR METERING & CLASS SP-10 FOR PROTECTION WITH AIR INSUL-ATED CTs CHAMBER.

2. SET OF TRIPLE POLE IDMT NON DIRECTIONAL OVER CURRENT & EARTH FAULT RELAY HAVING TWO OVER CURRENT ELEMENT (POLES) WITH SETTING

RANGE 50-200% & ONE EARTH FAULT ELEMENT WITH SETTING RANGE 10-20% HIGH SPEED 0.1 SECOND 10 TIMES PLUG SETTING & HOUSED ON HORIZONTAL DRAW OUT TYPE FLUSH PATTERN CASE SELF POWERED WITH PROTECTION ACC-

ESSORIES.

3. 144 MM X144 MM SQUARE DIAL CT OPERATED AMPMETER 0-50 AMPS WITH 3 WAY AND OFF ROTARY TYPE SELECTOR SWITCH.

4. THREE INDICATOR LAMPS FOR CIRCUIT BREAKER OPEN(OFF) GREEN,CIRCUIT BREAKER CLOSE(ON) RED & CIRCUIT BREAKER TRIP YELLOW.

5. INDICATOR FOR SPRING CHARGED / DISCHARGED.

6. TRIP SUPERVISION RELAY.

QUANTITY 01,DELIVERY AT CHANDIPUR ,BALASORE

THANKS WITH REGARDS

SANJAY KEDIA (M) 09040449711

Ash Bricks

Product Code : N.A

Quality and Standards : IS 12894:1990

Uploaded on : May 2007

Introduction

Fly Ash bricks are made of fly ash, lime, gypsum and sand. These can be extensively used in all building constructional activities similar to that of common burnt clay bricks. The fly ash bricks are comparatively lighter in weight and stronger than common clay bricks. Since fly ash is being accumulated as waste material in large quantity near thermal power plants and creating serious environmental pollution problems, its utilisation as main raw material in the manufacture of bricks will not only create ample opportunities for its proper and useful disposal but also help in environmental pollution control to a greater extent in the surrounding areas of power plants. In view of superior quality and eco-friendly nature, and government support the demand for Fly Ash Bricks has picked up.

Market Potential

The country consumes about 180 billion tonnes bricks, exhausting approximately 340 billion tonnes of clay every year and about 5000 acres of top soil land is made unfertile for a long period. The Government is seriously concerned over soil erosion for production of massive quantities of bricks, in the background of enormous housing needs.

The excellent engineering property and durability of fly ash brick enlarges its scope for application in building construction and development of infrastructure, construction of pavements, dams, tanks, under water works, canal lining and irrigation work etc. Enormous quantities of fly ash is available in and around thermal power stations in all the states. The demand of bricks could be met by establishing small units near thermal power stations and to meet the local demand with less transportation costs.

Basis and Presumptions

i. It is assumed that the unit will operate on single shift basis for 300 working days in a year.

ii. The salary and wages for staff and labour has been taken into consideration on the basis of prevailing market rates.

iii. To reach the full plant capacity, it requires 1 year after trial production.

iv. Interest rate at 13% is considered in the project profile for both recurring and nonrecurring

investment. v. Margin money will vary from 10- 25% depending upon the location and scheme adopted by the entrepreneur.

vi. Operative period of project is around 10 years considering technology obsolescence rate and period of repayment of loan.

vii. The costs of land, construction charges, machinery and equipment, raw materials, and consumables, other contingent expenses etc. indicated in the scheme are based on the prices, prevailing at the time of project preparation. Therefore, these are subject to necessary changes from time to time based on the local conditions.

Implementation Schedule

Sl. No.

Activity Period Starting

Period Completion

1.

Survey of collection of data in respect of demand, availability of technology, power, land and clearance from State Pollution Control Board

1day to 2nd month

2. Arrangement for margin money 2nd to 3rd

3. Preparation of project report and registration 2nd to 3rd

4. Finance assistance 2nd to 4th

5. Development of Site and construction of building

5th to 7th

6. Machine purchasing and installation 7th to 8th

7. Trial production 8th month

Technical Aspects Process of Manufacture

Fly ash, lime sand and gypsum are manually fed into a pan mixer where water is added in the required proportion for intimate mixing. The proportion of the raw material is generally in the ratio 60-80% of fly ash 10-20% lime, 10% Gypsum and 10% sand, depending upon the quality of raw materials.

After mixing, the mixture is shifted to the hydraulic/mechanical presses. The bricks are carried on wooden pellets to the open area where they are dried and water cured for 21 days. The bricks are tested and sorted before despatch.

Quality Control and Standards

The Bureau of Indian Standards has formulated and published the specification for maintaining quality of product and testing purpose.

IS 12894:1990.

Production Capacity (Per year)

Quantity (Nos.) : 60 Lakhs bricks

Value

Motive Power 30 KW.

Pollution Control

The technology adopted for making fly ash bricks is eco-friendly. It does not require steaming or auto calving as the bricks are cured by water only. Since the firing process is avoided, there are no emissions and no effluent is discharged. On the other hand, it solves the problem of fly ash disposal.

Energy Conservation

General precautions for saving electricity are required to be followed by the unit by adopting energy conservation techniques not only to conserve the power but also to save considerable expenditure in their own and also in the interest of the nation as a whole.

Financial Aspects A Fixed Capital

(i) Land and Building (Rs.)

Land 1 Acre @ Rs. 1200000 1200000

Building Area 165 sq. mt. @ Rs. 5000 per sq mt. 825000

Working Shed 150 sq. mt. @ Rs. 4000 per sq. mt. 600000

Boundary Wall, Gate L.S. 112519

Fly Ash Pond and Curring Tank L.S. 200000

Total 2937519

(ii) Machinery and Equipments

Description Ind./ Imp. .

Qty. Price (Rs.)

Pan mixer (run by 20 HP motor) Ind. 2 200000

Hydraulic Press (30 Tonnes Cap.) Ind. 2 450000

Belt Conveyor (Run by 3 HP motor) Ind. 1 100000

Deep Tube Well Ind. 1 80000

Generator - 1 250000

Steel Plates and Extra Moulds - L.S. 150000

Trollies - L.S. 60000

Office, Furniture and Equipments - L.S. 60000

Installation and Erection charges - L.S. 70000

Total 1420000

(iii) Pre-operative Expenses 100000

Total Fixed Capital (i+ii+iii) 4345000

B. Working Capital (per month)

(i) Staff and Labour (per month)

Designation Nos. Salary Total Salary (Rs.)

Manager 1 15000 15000

Production Engineer 1 12000 12000

Skilled Workers 5 6000 30000

Un-skilled Workers 10 4000 40000

Chowkidars 3 3000 9000

Peons 2 3000 6000

Cashier-Cum-Clerk 1 4000 4000

Total 116000

Add Perquisites @ 22% 25520

Total 141520

(ii) Raw Materials (per month)

Description Ind./ Imp.

Qty. (Ton.)

Rate (P.Ton)

Value (Rs.)

Fly Ash Ind. 1000 120 120000

Lime Ind. 250 1100 275000

Sand Ind. 125 120 15000

Gypsum Ind. 125 1100 137500

Total 547500

(iii) Utilities (per month) (Rs.)

Power 30000

Fuel 20000

Total 50000

(iv) Other Contingent Expenses (per month) (Rs.)

Postage and Stationery 2000

Telephone 4000

Transportation 10000

Insurance 5000

Repair and Maintenance 5000

Advertisement and Publicity 2500

Misc. Expenditure 5000

Total 33500

(v) Total Recurring Expenditure (per month) (i+ii+iii+iv) 772520

(vi) Total Working Capital (for 2 months) 1545040

C. Total Capital Investment

Fixed Capital 4345000

Working Capital 1545040

Total 5890040

Financial Analysis

(1) Cost of Production (per year) (Rs.)

Total Recurring Cost 9270240

Depreciation on Building at 5% 141250

Depreciation on Machinery and Equipment @10% 136000

Depreciation on Office equipment @ 20% 12000

Interest on Total Capital Investment @ 13% 765705.2

Total 10325195.2

(2) Turnover (per year)

Qty. Rate Value (Rs.)

60 Lakhs Bricks 2 per bricks 12000000

(3) Net Profit (per year) = Turn Over – Production Cost

= Rs. 12000000 – 10325195.2

= 1674804.8

(4) Net Profit Ratio = Net Profit x 100

--------------------

Total Turnover

= 1674804.8 x 100 ---------------------

12000000

= 13.96%

(5) Rate of Return = Net Profit (per year) x 100 ---------------------------

Total Investment

= 1674804.8x 100 ----------------------

5890040

= 28.43%

(6) Break-even Point

(i) Fixed Cost (Rs.)

Depreciation on building @ 5% 141250

Depreciation on Machinery and Equipment @ 10% 136000

Depreciation on Office Equipment @ 20% 12000

Interest on Total Capital Investment @ 13% 765705.2

Insurance 60000

40% of Salary and Wages 679296

40% of Other Contingent Expenses (excluding insurance) 136800

Total 1931051.2

B.E.P = Fixed cost x 100 -----------------------

Fixed cost + Profit

= 1931051.2 x 100 -----------------------

1931051.2 +1674804.8

= 53.55%

Addresses of Plant and Machinery Suppliers

1. M/s. Jindal Hydraulics D-203, Sector-10, Noida (UP)

Raw Material Suppliers

1. NTPC's and Thermal Power Plants for Fly Ash.

2. M/s. Stark and Co. 17, Najafgarh Road, Near Jakhira Chowk, New Delhi - 110015 Technology

3. Central Building Research Institute Roorkee - 247 667 (U.P.)

4. National Council for Cement and Building Materials

KM Stone, Delhi - Mathura Road, Ballabhgarh - 121 004 Distt. Faridabad (Haryana)

5. Institute for Solid Waste Research and Ecological Balance, Vishakhapatnam.

Contact for more information:

Information ManagerTIMEIS ProjectE-mail: [email protected]

Manufacturing and exporting brick making machine, concrete brick machine, manual concrete brick machine, industrial concrete brick machine and movable concrete brick machine. Also offering concrete block making machine.About Us View Products

Address: D-1, Madani Complex, 100 Feet Road, Gandhipuram, Coimbatore, Tamil Nadu - 641 012, IndiaSend EnquiryPhone: +(91)-(422)-4372010 Fax: +(91)-(422)-4373340Mobile / Cell Phone: +(91)-9843255532Website: http://www.blockmachinesindia.com/

Machines And Engineering Company, Coimbatore

Engaged in manufacturing and supplying of brick making machine, mobile clay brick making machine and fly ash brick making machine. Also offering other product concrete mixer with hooper and hydraulic operated concrete block making machine.About Us View Products View Video

http://www.meccbe.com/

http://www.meccbe.com/profile.html


http://www.blockmachinesindia.com/

http://www.blockmachinesindia.com/

http://www.blockmachinesindia.com/profile.html

mailto:[email protected]

Address: No. 385, 7th Street, Sanganoor Main Road, Near Railway Gate, Rathinapuri, Coimbatore, Tamil Nadu - 641 027, IndiaSend EnquiryPhone: +(91)-(422)-2333872/2330248/2332653 Fax: +(91)-(422)-2330248Mobile / Cell Phone: +(91)-9894300036Website: http://www.meccbe.com/

Benny Industries

Engaged in manufacturing and exporting of brick making machines that includes fly ash brick making machines, fly ash brick machines, automatic fly ash brick machines and fly ash brick plants. Also supplies tiles making machines.About Us View Products

Address: 12, Thadagam Road, Near Agarwal School Somaiyampalayam Post, Coimbatore, Tamil Nadu - 641 108, IndiaSend EnquiryPhone: +(91)-(422)-3232444/3231444 Fax: +(91)-(422)-2434426Mobile / Cell Phone: +(91)-9843180444Website: http://www.brick-blockmachines.com/concrete-block-plants.html

engaged in manufacturing, exporting and supplying brick making machines, fly ash brick making machines, automatic fly ash brick making machines and industrial brick making machines.About Us View Products View Video

Address: 30, Amman Kovil Street, Venkatapuram, G.C.T. Post, Coimbatore, Tamil Nadu - 641 013, IndiaSend EnquiryPhone: +(91)-(422)-2437208/2436129 Fax: +(91)-(422)-2452104Mobile / Cell Phone: +(91)-9944936703/9944936704Website: http://www.indiamart.com/lakshmibricktech/

http://www.indiamart.com/lakshmibricktech/

http://www.indiamart.com/lakshmibricktech/

http://www.indiamart.com/lakshmibricktech/about-us.html

http://www.brick-blockmachines.com/concrete-block-plants.html

http://www.brick-blockmachines.com/

http://www.brick-blockmachines.com/profile.html

http://www.brick-blockmachines.com/concrete-block-plants.html


xporters of brick making machines, concrete hollow block machines, paving block making machines, egg laying machines, stationary block making machines, cement block machines and mixer machines.About Us View Products

Address: 20, Koniamman Nagar, Behind Saraswathi Hospital, Chinthamanipudur Post, Trichy Road, Coimbatore, Tamil Nadu - 641 103, IndiaSend EnquiryMobile / Cell Phone: +(91)-8144850001/9367767772Website: http://www.santhoshengineering.com/block-making-machines.html

J. V. P. Equipments

Deals in manufacturing and supplying of brick making machines such as fly ash brick making machines, industrial brick making machines, hydraulic fly ash brick making machines and automatic fly ash brick machines.About Us View Products

Address: S. F. No. 281/2, Nallathaneerthottam, Ganapathy, Coimbatore, Tamil Nadu - 641 006, IndiaSend EnquiryPhone: +(91)-(422)-2331299/4364895/6569155 Fax: +(91)-(422)-2331299Mobile / Cell Phone: +(91)-9442072826/9443163537Website: http://www.jvpequipments.net/flyash-brick-making-machines.html

Contact Information - India

Kimberly-Clark Lever LimitedPost Bag No. 862Deccan Gymkhana Post OfficePune411004India

http://www.jvpequipments.net/flyash-brick-making-machines.html

http://www.jvpequipments.net/

http://www.jvpequipments.net/about-us.html

http://www.jvpequipments.net/flyash-brick-making-machines.html

http://www.santhoshengineering.com/block-making-machines.html

http://www.santhoshengineering.com/

http://www.santhoshengineering.com/profile.html

Phone: 91-2137 252547Phone: 91-2137 252545Fax: 91-21-375 252533E-mail: None Provided

Date : 7th April 2011ToM/s.Sanjay & Co.BalasoreKind Attn : Mr.Sanjay Kedia

Subject: TenderTiger.com Subscription Proposal / Quotation

Dear Sir, Thanks for showing interest in India’s National Tender Portal – www.TenderTiger.com which tracks more than 1 Million new Tenders every year – that’s 500,000 more tenders than any other Tender Portal. We also provide SAARC & Middle East countries tenders information on global platform. It’s because of our rich content, Lakhs of Suppliers, Contractors, and Service providers trust only TenderTiger.com to get their daily dose of Tenders - please refer our customer list, Annexure 1, which includes 89% of India’s top corporate houses.

TenderTiger.com is ranked #1 Tender Portal as per Alexa – the Internet rating agency. It’s because of our Global circulation, thousands of Government departments prefer TenderTiger.com for advertising Tenders online, and as a result you get the Tender Information first hand, before any other agency or individual.

TenderTiger.com is also frequently accessed by Tendering authority / Buyers in search of new Contractors, Suppliers & Service Providers. By registering on TenderTiger.com, India’s National TenderTiger.com, you also get to advertise / showcase your products & service to Buyers who matters.

Apart from Tenders, TenderTiger.com also provides you the Corrigendum & Tender Documents, Minutes of pre bid meeting & tender results wherever applicable such that you get all information on a single click for convenience & ease.

What’s more, now that a good percentage of tenders are enabled online, TenderTiger.com also tracks/enables eTenders such that you can participate in such tenders online. A good number of eTenders enabled on our own eProcurement Portal called www.abcProcure.com, where we enabled 10,000+ eTenders, eAuctions, Reverse Auctions, eRFQ worth Rs.50,000 Crore annually for 100’s of Government & Corporate Buyers – please refer Annexure 2 to see customer using our eProcurement suite, including fortune 500 companies from India.

Apart from Tenders, TenderTiger.com also tracks new Projects announced by Government & Corporate sectors companies where you can get an opportunity to provide your services. Annually more than 10,000+ Large & Medium sized project are tracked by us, where total investment is

http://www.rediffmail.com/cgi-bin/red.cgi?red=http://TenderTiger.com

http://www.rediffmail.com/cgi-bin/red.cgi?red=http%3A%2F%2Fwww.abcProcure.com%2F&isImage=0&BlockImage=0&rediffng=0









http://www.rediffmail.com/cgi-bin/red.cgi?red=http%3A%2F%2Fwww.TenderTiger.com%2F&isImage=0&BlockImage=0&rediffng=0


more than 1000+ Billion Dollars. This is another value added services aimed to give you competitive edge over your competitors.

TenderTiger.com also keeps you updated on upcoming Trade Fairs, Business Events, Exhibitions, Conferences etc...

Buyer / Contracting Authority also can publish their buying requirement on TenderTiger.com. We can do market making & promotion of the same to get maximum benefit for yourself.

TenderTiger.com is managed by e-Procurement Technologies Limited, an ISO 27001 & ISO 9001 certified company, based at Ahmedabad, India. A dedicated team of 300+ people & partners works together, to give you a competitive edge over your competitors. On daily basis, we track 1000’s of Newspapers, Journals, Websites to ensure that you/we do not miss out on Tenders. TenderTiger.com is the only portal that tracks all major languages including – Gujarat, Marathi, Hindi, Malayalam, Kanada, Bengali, etc. over & above English dailies & websites.

Subscribe TenderTiger.com today, if you wish to get access to all tenders of your choice out of 5000 New Tenders we compile daily from global sources. You can choose from one of the following plans;

Plan Service A : Daily Tender email alerts B : Access to TenderTiger.com and Projectstiger.com C : Combo Plan – daily email alerts + website access D : Corporate Plan – multi user access plan

Subscribe Offer : -

Plan Validity Region Rate inclusive of ST *

Description

Email + Web site Plan

One Year your category or Reason wise

Rs.6618/--

- Free Tender email alerts on 2 email ids - Access to Live Tender with Login ID & PW - Document Download If available- Free listing in Biz60.com- Can post their requirement free of cost in Biz60.com- Get tender result as per available

http://www.rediffmail.com/cgi-bin/red.cgi?red=http://Biz60.com


http://www.rediffmail.com/cgi-bin/red.cgi?red=http://Projectstiger.com







* ST: Service Tax @ 10.30% is included in the offer.

Plan Validity Region Rate inclusive of ST *

Description

Email + Web site Plan

2 Year your category or Reason wise

Rs.9500/--

- Free Tender email alerts on 2 email ids - Access to Live Tender with Login ID & PW - Document Download If available- Free listing in Biz60.com- Can post their requirement free of cost in Biz60.com- Get tender result as per available

* ST: Service Tax @ 10.30% is included in the offer.

Terms & Conditions

Cheque in favor of "E-Procurement Technologies Ltd.".and Fax on 079 40270516 or Scan On [email protected]

Cheque to be sent at below mentioned address by courier.

E - Procurement Technologies Ltd. B 705 Wall Street II Opposite Orient Club,Gujarat CollegeEllisbridge, Ahmedabad – 380006

Pl. send your contact details along with the Tenders you are interested in. In case of any clarification, pl. contact to mansukh @TenderTiger.com or Call me on

+91 990478127 0

You can also deposit payment directly in our account herewith I am sending you the account details, kindly have a look on that.

Account Name: e-Procurement Technologies LimitedCurrent Account No: 002405012757Bank Name: ICICI Bank LtdBranch Name & Address: JMC House, Opp. Parimal Gardens, Off C G Road, Ambavadi, Ahmedabad 380006



Remember, by registering on TenderTiger.com, you also get to register on abcProcure.com India’s premier eProcurement Platform where we enabled 10,000+ eTenders, eAuctions, Reverse Auctions, eRFQ worth Rs.50,000 Crore annually for 100’s of Government & Corporate Buyers

Looking forward to your reply and queries if any.

Yours truly,

Mansukh.Khaniya Senior Executive

E - Procurement Technologies Ltd. B 705, Wall Street II Opposite Orient Club, Gujarat College Ellisbridge, Ahmedabad – 380006 Mobile – 09904781270 Phone: 079 – 40270523Fax : 079 – 40270516Email: [email protected] Web: www.TenderTiger.com

Annexure 1: Customer list of our Listing Portal – TenderTiger.com

We have more than 500,000 Large, Medium, Small Companies & Individual consultants registered on TenderTiger.com, who depend on TenderTiger.com for Tenders, Projects & eProcurement leads. Partial list of customers is listed below;

3i Infotech Ltd.ABB India Ltd.Adani GroupAfcons Infrastructure Ltd.Bharti AirtelBharat Heavy Electricals Ltd.Cisco Systems (India) Pvt. Ltd.DLF India Ltd.D – Link India Ltd.Eureka Forbes Ltd.Gammon India Ltd.Godrej India Ltd.GE GroupGrasim Industries Ltd.HP India Ltd.

IL&FS, MumbaiKirolskar Brothers Ltd.Larsen & Toubro Ltd.Nagarjuna Construction Co. Ltd.Pidilite Industries Ltd.Pratibha Industries Ltd.Reliance Industries Ltd.Reliance – ADAGSintex Industries Ltd.Sun Pharma Ltd.Suzlone Energy Ltd.Sun Microsystems India Ltd.Sun Pharma Ltd.Tata GroupVideocon Industries Ltd.




http://www.rediffmail.com/cgi-bin/red.cgi?red=http%3A%2F%2Fwww.tendertiger.com%2F&isImage=0&BlockImage=0&rediffng=0

http://www.rediffmail.com/cgi-bin/red.cgi?red=http://abcProcure.com


HCL Inforsystems Ltd.IVRCl Infrastructure & Projects Ltd.

Wipro Ltd.Zenith Computers Ltd. & many more..

Annexure 2: Customer using our eProcurement Platform – abcProcure.com

We have 100’s of Government & Private Sector companies using eProcurement platform for enabling eTendering, eAuction, Reverse Auction, eRFQ, eSourcing, etc. Partial list of customers is listed below;

Govt. of Andhra PradeshGovt. of BangladeshAcme Tele Power Ltd.Axis Bank Ltd.Doshion Veolia Water SolutionsESSAR GroupGCMMF Ltd.Gujarat Gas Co. Ltd.GVK - EMRIHinduja Global Solutions Ltd.ICICI GroupNCDEXNilon's Enterprises Pvt. Ltd.Noida Power Co. Ltd.Reliance Capital Ltd.RPG Cables Ltd.Siemens Ltd.Sterlite Technologies Ltd.Tower Vision (I) Pvt. Ltd.Balmer Lawrie & Co LtdBank of BarodaBank of IndiaBank of Rajasthan Ltd.Bharat Dynamics LimitedBritinnia Industries

Bharat Heavy Electrical LimitedBharat Petroleum Corporation Ltd.Brahmaputra Valley FertilizersCanara BankCanara HSBC Life InsuranceContainer Corporation of India Ltd.Delhi International Airport Ltd.Hindustan Newsprint Ltd.IDBI BankIndian BankIndian Oil Corporation Ltd.Kudremukh Iron Ore Co. Ltd.Maruti Suzuki Inc.NABARDNagaland Paper & Pulp Corp. Ltd.National Textile Corporation Ltd.Nuclear Power Corp. of India Ltd.Rashtriya Chemicals&FertilizersSIDBIState Bank of IndiaStock Holding Corp. of India Ltd.Union Bank of IndiaUniversal Construction MachineryWriter Safegaurd Pvt. Ltd.Zydus Cadila Healthcare Ltd.

http://www.rediffmail.com/cgi-bin/red.cgi?red=http://abcProcure.com

Sanjay & CO.

Balance Sheet

1-Apr-2009 to 31-Mar-2010 L i a b i l i t i e s as at 31-Mar-2010 A s s e t s as at 31-Mar-2010

Capital Account 7,20,142.46 Capital Account 720142.46 Fixed Assets 69,488.00

Jewellery & Ornaments 45,600.00

Motor Cycle 23,888.00

Loans & (Liability) Investments 3,50,128.00 Share Investments 7,310.00

Capital a/c with sanjay & co. 3,31,188.00

Lip_lic 588491295 11,630.00

Current Liabilities Current Assets 3,00,526.46 Loans & Advances (Assets) 1,12,000.00

Profit & Loss A/c Cash-in-hand 42,120.46

Bank Accounts 1,46,406.00

Opening Balance Current Period 2,02,213.00

Less: Transferred 2,02,213.00

---------------- ---------------- T o t a l 7,20,142.46 T o t a l 7,20,142.46

Dear Mr. Sanjay , Greetings from TARA Machines!!!

This refers to your inquiry regarding TARA- Fly Ash Technology, first of all on behalf of TARA Machines I like to thank you for showing your interest in our products and technologies. TARA Machines markets green technology solutions for building construction and waste recycling. TARA Machines delivers business solutions to a global network of micro, small and medium enterprises owned by individuals, self help groups or promoted by companies, NGOs, and financing institutions. TARA Machines provides total solutions including custom designed machines, technology know-how, training, material testing services and green consultancy. We have a portfolio of solutions for rapid production of elements for Walling, Roofing and Flooring. The raw materials required will be a combination of earth, sand, cement and aggregate; all these materials will be available locally. TARA Machines is a specialist company in Green Building Technology. The current portfolio of technology packages includes solutions for production of Red Bricks (TARA Eco-kiln), Fly Ash Bricks (TARA Fly Ash Technology), Concrete Pavers (TARA PaveMek Technology), Micro Concrete Roofing Tiles (TARA Micron Technology) and one another unique

technology which TARA Machines have for waste paper recycling (TARA PaperMek Technology). Please find the attachment of Technology Profile of TARA Fly Ash & Quotations. Looking forward to hear from you and for any further clarifications please revert us back or visit www.taramachnines.com.

thanks & regards

Naresh Kumar Das 09937080310

TARA Machines & Tech. Services Pvt. Ltd. 29, Vill Ghitorni, MG Road, Delhi-30visit us : www.taramachines.com

http://www.rediffmail.com/cgi-bin/red.cgi?red=http%3A%2F%2Fwww.taramachines.com&isImage=0&BlockImage=0&rediffng=0

http://www.rediffmail.com/cgi-bin/red.cgi?red=http%3A%2F%2Fwww.taramachnines.com%2F&isImage=0&BlockImage=0&rediffng=0

KANTAM INTERNATIONAL13, B.B.GANGULY ST ,PUNARNAVA,1ST FLOOR, ROOM-104

KOLKATA -700012 ( INDIA ) TELE + FAX – 91 33 22367888

MOBILE: 9830169130 / 9432309895 / 9330980607

E-MAIL:[email protected] / [email protected]

WEB : kantaminternational.com

To,

The Manager,

Purchase/Maintenance.

Dear Sir,

Sub: Introductory letter

Fly ash brick making machines / Paver making machine / Brick making machines/ Concrete block machines / De airing pug mill / / Weast Crussing machine / CONSTRUCTION MACHINERIES

http://www.rediffmail.com/cgi-bin/red.cgi?red=http%3A%2F%2Fwww.indiamart.com%2Flakshmibricktech%2F%23deairing-pug-mill%23deairing-pug-mill&isImage=0&BlockImage=0&rediffng=0

http://www.rediffmail.com/cgi-bin/red.cgi?red=http%3A%2F%2Fwww.indiamart.com%2Flakshmibricktech%2F%23concrete-hollow-block-making-machines%23concrete-hollow-block-making-machines&isImage=0&BlockImage=0&rediffng=0

http://www.rediffmail.com/cgi-bin/red.cgi?red=http%3A%2F%2Fwww.indiamart.com%2Flakshmibricktech%2F%23concrete-hollow-block-making-machines%23concrete-hollow-block-making-machines&isImage=0&BlockImage=0&rediffng=0

http://www.rediffmail.com/cgi-bin/red.cgi?red=http%3A%2F%2Fwww.indiamart.com%2Flakshmibricktech%2F%23automatic-fly-ash-brick-making-machines%23automatic-fly-ash-brick-making-machines&isImage=0&BlockImage=0&rediffng=0

http://www.rediffmail.com/cgi-bin/red.cgi?red=http%3A%2F%2Fwww.indiamart.com%2Flakshmibricktech%2F%23automatic-fly-ash-brick-making-machines%23automatic-fly-ash-brick-making-machines&isImage=0&BlockImage=0&rediffng=0

http://www.rediffmail.com/cgi-bin/red.cgi?red=http://kantaminternational.com

Hollow block making machines Potter wheel /Interlock machineryConcrete mixer/Paving block machinery Automatic Fly Ash Brick MakingMachines (stabilized soil block and clay brick )

Development is synonymous with infrastructural advancements. We are provided immense impetus to the infrastructural development by facilitating the new age advances through exhaustive infrastructural machinery product range,

Company Profile

Nations have been built and lost on the important constituent of infrastructure that form the basis for any strong economy. A majority player in this brick and mortar segment through the ingenuity and brilliance of our product range. Since our foray in this segment in 1995 we have made rapid advances in improving the available technology. With the accent being on fulfilling the infrastructural needs due to a new age economy we have rapidly bolstered our position as the bricks making machinery leader.

May we kindly request you to go through the same and feel free to contact us for further clarifications if any?

Thanking you and assuring you of our best services at all times.

Best regards

Kantam International

(B.Doshi)

To,

Mr Sanjay Kedia,BalasoreOrissa.

QUOTATION FOR SEMI AUTOMATIC MACHINE FOR MAKING PLAIN BRICKS.

1. Cost. Semi-Automatic Machine for making bricks of size 250 x 120 x 75mm would

amount to Rs.325,000/- (Rupees Three Lacs and Twenty Five Thousand only) excluding

Transportation and Taxes as applicable. The unit consists of the following items :

(a) Brick press unit – 1

(b) Die Plates - 1 set

(c) Power Pack unit – 1

(d) 150 litres mixing machine – 1

(e) Tools and spares.

2. Additional Accessories (Optional). This is a versatile machine. With a change of mould

box and some fitting, this machine is capable of making 200mm paver blocks of the I Shape. Cost

for the mould box with support system for making 200mm I shaped Paver blocks would be Rs

25,000.00.

3. BUSINESS TERMS .

(a) Packing. 3% of Machine cost.

(b) Insurance. At the buyers end.

(c) Tax.

(i) 4% VAT will be charged against DIC Registration and Valid TIN or

13.5% VAT.

(ii) Entry Tax 2%.

(d) Transportation. Extra at the buyers end.

(e) Payment. Advance of 40% to be paid along with firm order by Demand Draft

in favour of M/s Terrablock Machinery Pvt Ltd payable at Bhubaneswar. Balance 60%

payment alongwith all taxation as applicable (as mentioned in our Proforma Invoice) by

Demand Draft payable at Bhubaneswar to be done before delivery of the machine.

(f) Delivery. Within 4-6 weeks after payment of advance along with firm order.

(g) Guarantee. Guarantee for 6 months against manufacturing defects.

(h) Inspection. Inspection of the machine can be done before delivery in working

condition at factory site in Bhubaneswar.

(i) Installation and Training. The inspection and training team would consist of 2 persons

( one x fitter and one x electrician) for 3 days. Travel, stay and food as actual to be

provided to the erection team.

(f) Validity . This offer is valid for a period of six weeks from receipt of this letter.

(k) Legal Jurisdiction. Court at Bhubaneswar

Thanking You.Yours sincerely,

for Terrablock Machinery Pvt. Ltd.

(SANDEEP MAHAPATRA)DIRECTOR

S

Documents

Transcript of S