s300

SIMATIC S7-300

44/2 4/4 4/34 4/44 4/55 4/61 4/65 4/65 4/67 4/69 4/70 4/72 4/74 4/78 4/80 4/82 4/84 4/85 4/86 4/89 4/92 4/93 4/94 4/96 4/98 Introduction Central processing units Digital modules Analog modules F digital /analog modules Ex input/output modules Function modules FM 350-1 counter module FM 350-2 counter module CM 35 counter module FM 351 positioning module FM 352 electronic cam controller FM 352-5 High Speed Boolean Processor FM 353 positioning module FM 354 positioning module FM 357-2 positioning module FM STEPDRIVE power section 1FL3 SIMOSTEP stepper motors FM 355 closed-loop control module FM 355-2 closed-loop control module SM 338 ultrasonic position encoder module SM 338 POS input module SIWAREX U SIWAREX M SIWAREX A 4/100 Special modules 4/101 Communication 4/114 Connection methods 4/119 Interface modules 4/120 Power supplies 4/123 Accessories

Siemens ST 70 2003

4/1

SIMATIC S7-300IntroductionSIMATIC S7-300

Overview

4

Fig. 4/1

Automation system SIMATIC S7-300

SIMATIC S7-300 The modular mini PLC system for the low-end and mid performance ranges With a comprehensive range of modules for optimum adaptation to the automation task Flexible usage through the easy implementation of distributed structures and versatile networking capability User-friendly handling and uncomplicated, fan-free design Trouble-free expansion when your task grows Powerful thanks to a large number of integrated functions

SIMATIC S7-300F Failsafe automation system for installations in manufacturing with increased safety requirements Complies with safety requirements up to SIL 3 to IEC 61508, AK6 to DIN V 19250 and Cat. 4 acc. to EN 954-1 Based on S7-300 with failsafe modules Standard modules for nonsafety-related applications can also be used in the automation system

SIMATIC S7-300 Outdoor The PLC for use in the harshest environmental conditions With extended temperature range from -25 to +60C (+70C in development) Occasional short-term condensation and increased mechanical loading permissible With the proven PLC technology of the S7-300 Convenient handling, programming, maintenance and service Ideal for use in the automotive industry, environmental technology, mining, chemical plants, production technology, food industry etc. The alternative to expensive custom solutions

4/2

Siemens ST 70 2003

SIMATIC S7-300Introduction Technical specificationsGeneral technical specifications S7-300, S7-300F Degree of protection Ambient temperature At horizontal installation At vertical installation Relative humidity 0 to 60 C 0 to 40 C 5 to 95%, no condensation (RH degree of severity 2 to IEC 1131-2) 795 to 1080 hPa Temporary icing 500 V DC test voltage 1460 V AC test voltage Complies with EMC requirements; Noise suppression to EN 500822, tested to: IEC 801-2, ENV 50140, IEC 801-4, ENV 50141, IEC 801-5; Noise emission to EN 50081-2, tested to EN 55011, Class A, Group 1 IEC 68, Part 2-6/10 to 58 Hz; constant amplitude 0.075 mm; 58 to 150 Hz; constant acceleration 1 g; period of vibration: 10 frequency sweeps per axis in each of the three mutually perpendicular axes IEC 68, Part 2-27/half-sine: Shock strength: 15 g (peak value), duration 11 ms Pollutant concentrations Atmospheric pressure Relative humidity IP 20 to IEC 529 General technical specifications S7-300 Outdoor Climatic operating conditions Temperature Horizontal installation: -25C to 60C (70C under development) Vertical installation: -25C to 40C 5 to 95%; short-term moisture condensation allowed, corresponds to relative humidity (RH) degree of severity 2 at IEC 1131-2 and IEC 721 3-3 Class 3K5 -25C to 0C IEC 721 3-3 Class 3K5 1080 to 795 hPa Corresponds to a height of 1000 to 2000 m SO2: < 0.5 ppm; relative humidity 55 mJ No 100 m 600 m SF, red LED MCF, red LED 5V DC, green LED IOF, red LED RUN, green LED STOP, yellow LED 5VF, red LED, 24VF, red LED I0 to I11, 12 green LEDs Encoder signals Incremental 5 V encoder (RS422) Incremental 24 V encoder A, /A, B, /B, and N, /N A, B and N Counter range (32-bit counter): Individual Counter range (16-bit counter): Counter range (32-bit counter): Count modes Continuous Counter range (16-bit counter): Counter range (32-bit counter): Periodic Counter range (16-bit counter): Yes, 16-bit or 32-bit counter -32768 to 32767 (user-specific within this range) -2,147,483,648 to 2,147,483,647 (user-specific within this range) Yes, 16-bit or 32-bit counter -32768 to 32767 (user-specific within this range) -2,147,483,648 to 2,147,483,647 (user-specific within this range) Yes, 16-bit or 32-bit counter -32768 to 32767 (user-specific within this range) -2,147,483,648 to 2,147,483,647 (user-specific within this range) Main counting direction Hardware hold source Hardware reset source 8 Current sinking 28.8 V max. 24 V DC 28.8 V DC max. Sensor support 5 V differential 24 V single-wire Serial interface Support for additional 24 V inputs 16-bit or 32-bit counter 16-bit or 32-bit counter 13-bit or 25-bit message length Yes, at 5 V differential or serial interface sensor inputs or if no sensor is available

4

0.5 V DC max. 1.0 mA

Maximum counter input frequency for sensor 5 V DC input 24 V DC input Control at 5 V and 24 V signal Sensor gating Reset source Pulse & direction, 1X, 2X, 4X No, HW, SW, HW and SW, HW or SW Constant 0, min/max value, load value Edge, layer Constant, module application No, HW, SW, HW and SW, HW or SW User entry or module application User entry User entry Count forward/backward Can be set to any input between 0 and 14 Can be set to any input between 0 and 14 1 MHz 200 kHz

For a lamp load Output delay (resistive load) ON to OFF OFF to ON Output protection Short circuit Threshold value for response Overvoltage Thermal Inductive limitation at kickback from inductive loads Digital input control Cable length Unshielded Shielded Status, diagnostics Module malfunction MMC error Module supply I/O status Run mode Stop mode Overload on sensor power supply Status display, digital input module DI

10 Hz 5 Watt maximum

Status display, digital output module DO O0 to O7 8 green LEDs

Siemens ST 70 2003

4/75

SIMATIC S7-300Function modulesFM 352-5 High-Speed Boolean Processor

Technical specifications (continued)SSI sensor Signal types Master mode Listening mode Multi-turn Maximum number of sequence steps Delay, configurable (Monoflop timer) Shift register, length Clock rate Cable length, RS-422 (5 V) incremental sensor, Siemens type 6FX201-2, 5 V supply Cable length, RS-422 (5 V) incremental sensor, Siemens type 6FX201-2, 24 V supply Cable length, RS-422 serial interface absolute sensor Siemens type 6FX201-5, 24 V supply D, /D, CK and /CK Yes Yes, up to two stations 25-bit message frame 16.777.216 sequence step 16, 32, 48, or 64 s. 13 bit or 25 bit 125 kHz, 250 kHz, 500 kHz, or 1 MHz 500 kHz, 32 meters, shielded, max. 500 kHz, 100 meters, shielded, max. 125 kHz, 320 meters shielded, max. 250 kHz, 160 meters shielded, max. 500 kHz, 60 meters shielded, max. 1 MHz, 20 meters shielded, max. Left or right 0 to 12 bit Via RS-422 330 DC / 116 AC COUNTERS CTD16 CTU16 CTUD16 CTUD32 TIMERS TOF16 TOF32 TON16 TON32 TP16 TP32 SHIFT REGISTERS SHIFT SHIFT2 SHIFT4 SHIFT8 COMPARATORS CMP16_EQ CMP16_GE CMP16_GT CMP16_LE CMP16_LT CMP16_NE CMP32_EQ CMP32_GE CMP32_GT 1L, 2L, 3L missing; MMC error; output overload (8); sensor supply overload; differential wire break; parameter assignment error; serial interface message frame overflow. 8 available; for generation by user program 1 s 5 ms (2.6 ms typ.) 1 to 4 s (typ.) 2 to 6 s (typ.) Partitioned, maximum 1 1 2 2 2 29 17 0 CMP32_LE CMP32_LT CMP32_NE TYPE GENERATION I_DI I_DI_U LOGICAL OPS AND OR XOR SENSOR TYPES Serial interface Master - 13-bit Serial interface Master - 25-bit Serial interface Listener - 16-bit Serial interface Listener - 32-bit None Serial interface Master - 13-bit Serial interface Master - 25-bit Memory card Size Type Order No. 64 117 61 100 77 122 0 Required for operation 128 KB, at least MMC (Micro Memory Card) 6ES7 953-8Lx00-0AA0 1 1 1 9 0 6 17 8 17 8 6 11 33 25 33 25 11 18 18 18 19 26 55 25 53 26 54 36 31 47 99

4

Data shifting direction (normalizing) Data shifting distance (normalizing) 5 V level for input logic 5 V input voltage Interrupts Diagnostics

Process Program technical specifications Program cycle time (scan) Update rate PLC interface Input to output response time 5 V input to 24 V output, 0 filter 24 V input to 24 V output, 0 filter Control signal buffer size FLIP FLOPS, etc. RSFF SRFF NEG POS BISCALE CP_GEN MOVE MOVE_U

4/76

Siemens ST 70 2003

SIMATIC S7-300Function modulesFM 352-5 High-Speed Boolean Processor

Ordering dataFM 352-5 high-speed Boolean processor Configuring software for FM 352-5 in 5 languages Ge, En, Fr, Sp, It; executes under Windows 98/Me/ NT 4.0 from SP3 onwards/2000 Professional from SP 1 onwards

Order No. 6ES7 352-5AH00-0AE0 6ES7 352-5AH00-7XG0 Micro memory card 128 KB 512 KB 2 MB Front connector 40-pin, with screw-type terminals 1 unit 100 units 40-pin, with spring-loaded terminals

Order No.

6ES7 953-8LG00-0AA0 6ES7 953-8LJ00-0AA0 6ES7 953-8LL00-0AA0

46ES7 392-1AM00-0AA0 6ES7 392-1AM00-1AB0 6ES7 392-1BM01-0AA0

Siemens ST 70 2003

4/77

SIMATIC S7-300Function modulesFM 353 positioning module

Overview

Positioning module for stepper motors in machines with high clock pulse rates Can be used for point-topoint positioning tasks and for complex traversing patterns

4

Technical specificationsGeneral specifications Supply voltage Current consumption Protection to DIN 40050 Permissible humidity to DIN 40040 Permissible ambient temperature Storage and transport Operation Required front connector Dimensions (W x H x D) in mm Weight, approx. Drive interface Signal input Function Signal outputs Output signals 5 V difference signal (phys. RS 422) for: Direction Enable Cycle Power regulation Differential output voltage, min. 0 signal, max. 1 signal, min. Cable length 2 V (RL = 100 ) 1 V (I0 = 20 mA) 3.7 V (I0 = -20 mA) 35 m Electrical isolation Output voltage Rated value 0 signal, max. 1 signal, min. Output current 24 V DC Residual current max. 2 mA UP 3 V 0.6 A at UPmax. (short-circuit proof) Power section Ready" -40 to +70 C 0 to +55 C 1 x 20-pin 80 x 125 x 118 mm 500 g Electrical isolation Input voltage Rated value 0 signal, max. 1 signal, min. Input current, min. 0 signal, max. 1 signal, min. Digital outputs Number of inputs Functions 4 Position reached: stop Axis traveling forward Axis traveling in reverse Change M function M97 Change M function M98 Enable start Direct output using data record No 2 mA 6 to 15 mA 24 V DC -3 to +5 V 11 to 30 V 24 V DC 300 mA IP 20 Humidity class F Digital inputs Number of inputs Functions 4 Reference cam Set actual value on-the-fly Measure on-the-fly Start/stop positioning run External block change No

4/78

Siemens ST 70 2003


Ordering dataFM 353 positioning module for stepper motors; incl. configuration package on CD-ROM, Ge, En, Fr, It, comprising: FM 353 manual, electronic Standard function blocks (STEP 7 interface software) Screen-based configuration software for FM 353 Standard HMI forms for OP7/OP17 FM 353 manual German English French Italian Edit FM Program editor for editing, loading and saving NC programs using standard programming device/PC; German/English, on CD-ROM Connecting cable to stepper motor power section 1m 2m 3m Connecting cables and encoders Sub-D connector 15-pin, female

Order No. 6ES7 353-1AH01-0AE0 Front connector 20-pin, with screw-type terminals 1 unit 100 units 20-pin, with spring-loaded terminals Bus connector 1 unit (spare part) Labelling strips 6ES7 353-1AH01-8AG0 6ES7 353-1AH01-8BG0 6ES7 353-1AH01-8CG0 6ES7 353-1AH01-8EG0 6FC5 263-0AA03-0AB0 10 units (spare part) S7-SmartLabel Software for machine labelling of modules directly from the STEP 7 project Labelling sheets for machine labelling Slot number label Spare part Shield connecting element 80 mm wide, with 2 rows for 4 terminal elements each 6FX8002-3AC02-1AB0 6FX8002-3AC02-1AC0 6FX8002-3AC02-1AF0 See Catalog NC 60, NC Z, CA 01 or in the A&D Mall 6ES5 750-2AB21 Terminal elements 2 units For 2 cables with 2 to 6 mm diameter For 1 cable with 3 to 8 mm diameter For 1 cable with 4 to 13 mm diameter

Order No.

6ES7 392-1AJ00-0AA0 6ES7 392-1AJ00-1AB0 6ES7 392-1BJ00-0AA0 6ES7 390-0AA00-0AA0

4

6ES7 392-2XX00-0AA0

2XV9 450-1SL00-0YX0

See "Accessories" 6ES7 912-0AA00-0AA0

6ES7 390-5AA00-0AA0

6ES7 390-5AB00-0AA0 6ES7 390-5BA00-0AA0 6ES7 390-5CA00-0AA0

Siemens ST 70 2003

4/79


Overview

Positioning module for servo motors in machines with high clock pulse rates Can be used for point-topoint positioning tasks and for complex traversing patterns

4

Note: We offer position sensing systems and preassembled connecting cables for counting and positioning functions under SIMODRIVE Sensors or Motion Connect 500 (see also www.siemens.de/simatictechnologie).

Technical specificationsGeneral specifications Supply voltage Current consumption Supply current for position encoders Supply voltage for position encoder Protection to DIN 40050 Permissible humidity to DIN 40040 Permissible ambient temperature Storage and transport Operation Required front connector Dimensions (W x H x D) in mm Weight, approx. Position detection, incremental Accepts encoder types Track signals Zero mark signal Input signal Input frequency, max. Cable length 5-V encoder supply, max. 24-V encoder supply, max. Synchronous-serial position detection Accepts encoder types Data signal Clock signal Frame length Input signal Transmission rate max. Encoder supply Cable length, max. Single or multiturn encoders with SSI DATA, not DATA CL, not CL 13, 21 or 25 bit 5 V difference signal (phys. RS 422) 1.25 Mbit/s 24 V DC, max. 300 mA 10 m (at 1.25 Mbit/s) 100 m (at up to 125 kbit/s) Electrical isolation Input voltage Rated value 0 signal 1 signal Input current, min. 0 signal, max. 1 signal 2 mA 6 to 15 mA 24 V DC -3 to +5 V 11 to 30 V 35 m at max. 220 mA 100 m at max. 300 mA Encoders with TTL quadrature signal A, not A; B, not B N, not N 5 V difference signal (phys. RS 422) 1 MHz -40 to +70 C 0 to +55 C 1 x 20-pin 80 x 125 x 118 mm 550 g 24 V DC 350 mA Max. 300 mA 5 V or 24 V IP 20 Humidity class F Drive interface Input closed-loop controller signal Function Electrical isolation Input voltage Rated value 0 signal 1 signal Input current at "1" signal Output closed-loop controller enable (contact) Function Load, max. Analog output Function Output voltage Output current Cable length, max. Digital inputs Number of inputs Function (configurable) 4 Reference cam Set actual value on-the-fly Measure on-the-fly Start/stop positioning run External block change No Setpoint output for drive -10 to +10 V -3 to +3 mA 35 m Safety disconnection of drives for operation using contact relays 1 A/50 V/30 VA DC 24 V DC -3 to +5 V 15 to 30 V 2 mA to 6 mA Drive ready Yes (optocoupler)

4/80

Siemens ST 70 2003


Technical specifications (continued)Digital outputs Number of inputs Function 4 Position reached: stop Axis traveling forward Axis traveling in reverse Change M function M97 Change M function M98 Enable start Direct output via data record Electrical isolation Output voltage Rated value 0 signal 1 signal Output current 24 V DC Residual current max. 2 mA UP 3 V 0.6 A at UPmax. (short-circuit proof) No

4

Ordering dataFM 354 positioning module for servo motors; incl. configuration package on CD-ROM, Ge, En, Fr, It, comprising: FM 354 manual, electronic Standard function blocks (STEP 7 interface software) Screen-based configuration software for FM 354 Standard HMI forms for OP7/OP17 FM 354 manual German English French Italian Edit FM Program editor for editing, loading and saving NC programs using standard programming device/PC; German/English, on CD-ROM Connecting cables and encoders 703 connecting cable Sub-D connector 15-pin, male 9-pin, female

Order No. 6ES7 354-1AH01-0AE0 Front connector 20-pin, with screw-type terminals 1 unit 100 units 20-pin, with spring-loaded terminals Bus connector 1 unit (spare part) Labelling strips 6ES7 354-1AH01-8AG0 6ES7 354-1AH01-8BG0 6ES7 354-1AH01-8CG0 6ES7 354-1AH01-8EG0 6FC5 263-0AA03-0AB0 10 units (spare part) S7-SmartLabel Software for machine labelling of modules directly from the STEP 7 project Labelling sheets for machine labelling Slot number label Spare part See Catalog NC 60, NC Z, CA 01 or in the A&D Mall See FM 351 Shield connecting element 80 mm wide, with 2 rows for 4 terminal elements each Terminal elements 2 units 6ES5 750-2AA21 6ES5 750-2AB11 For 2 cables with 2 to 6 mm diameter For 1 cable with 3 to 8 mm diameter For 1 cable with 4 to 13 mm diameter

Order No.

6ES7 392-1AJ00-0AA0 6ES7 392-1AJ00-1AB0 6ES7 392-1BJ00-0AA0 6ES7 390-0AA00-0AA0

6ES7 392-2XX00-0AA0

2XV9 450-1SL00-0YX0


6ES7 390-5AA00-0AA0


Siemens ST 70 2003

4/81

SIMATIC S7-300Function modulesFM 357-2 positioning module

Overview

User-friendly startup through easy-to-use parameterization tool Interface for SIMODRIVE 611U and MASTERDRIVES MC using the isochronous PROFIBUS (not for FM 357-2H in combination with HT6) Note: We offer position sensing systems and preassembled connecting cables for counting and positioning functions under SIMODRIVE Sensors or Motion Connect 500 (see also www.siemens.de/simatictechnologie).

4

Continuous path and positioning control for the intelligent motion control of up to 4 axes

Covers a wide spectrum from independent individual positioning axes through to interpolatory multi-axis continuous-path control For the control of stepper motors and controlled servodrive axes

Technical specificationsGeneral specifications NC program memory, approx. Programmable traversing speed max. Supply voltage Power consumption max. Power consumption from backplane bus Protection to DIN 40050 Required front connector Dimensions (W x H x D) in mm Weight approx. Position detection, incremental Accepts encoder types Track signals Zero mark signal Input signal Input frequency, max. Cable length 5-V encoder supply, max. 24 V encoder supply, max. Synchronous-serial position detection Accepts encoder types Data signal Clock signal Frame length Input signal Transmission rate max. Encoder supply Cable length, max. Single or multiturn encoders with SSI DATA, not DATA CL, not CL 13, 21 or 25 bit 5 V difference signal (phys. RS 422) 1.5 Mbit/s 24 V DC, max. 300 mA 250 m (at max.187.5 kbit/s) Electrical isolation 35 m at max. 210 mA 100 m at max. 300 mA Encoders with TTL quadrature signal A, not A; B, not B N, not N 5 V difference signal (phys. RS 422) 1 MHz Differential output voltage, min. 0 signal, max. 1 signal, min. Sensor frequency for T, max. Permissible cable length max. In mixed mode with servo axes max. Digital drive interface using PROFIBUS DP with MC expansions Digital inputs Number of inputs Function 18 4 Bero 2 probe 12 freely usable Yes 750 KB 1000 m/min 24 V DC 24 W 100 mA IP 20 1 x 40-pin 200 x 125 x 118 1.2 kg Drive interface for analog drives Output closed-loop controller enable (contact) Function Load, max. Analog output Function Output voltage Output current Cable length, max. Drive control interface for stepper motors Output signals 5 V difference signal (phys. RS 422) for: Direction, enable, clock 2 V (RL = 100 ) 1 V (I0 = 20 mA) 3.7 V (I0 = -20 mA) 750 kHz 50 m 35 m See SIMODRIVE 611 Universal, MASTERDRIVES MC Setpoint output for drive -10 to +10 V -3 to +3 mA 35 m Safety disconnection of drives for operation via contact relays 1 A/50 V/30 VA DC

4/82

Siemens ST 70 2003

SIMATIC S7-300Function modulesFM 357-2 positioning module

Technical specifications (continued)Input voltage Rated value 0 signal Type 1 Input current 0 signal, max. Type 1 Digital outputs Number of inputs Function 8 8 freely usable Load, max. 2 mA 6 mA to 30 mA 24 V DC -3 to +5 V 11 to 30 V Electrical isolation Output voltage Rated value 0 signal 1 signal Output current FM-READY output (contact) Function Ready for linking to Emergency Stop 1 A/50 V/30 VA DC 24 V DC Residual current max. 2 mA UP 3 V 0.6 A at UPmax Yes

4

Ordering dataFM 357-2 positioning module Basic device System firmware incl. configuring package on CD-ROM, Ge., En., Fr., It., comprising manual (electronic), configuring software (parameterization forms, standard blocks, HMI forms for OP17/OP27) FM 357-2L system firmware on memory card FM 357-2LX system firmware with additional functions; on memory card FM 357-H system firmware with additional functions for handling range; on memory card

Order No. 6ES7 357-4AH01-0AE0 FM 357-2 manual German English French Italian Edit FM Program editor for editing, loading and saving NC programs using standard programming device/PC; German/English, on CD-ROM Connecting cables and encoders

Order No.

6ES7 357-4AH00-8AG0 6ES7 357-4AH00-8BG0 6ES7 357-4AH00-8CG0 6ES7 357-4AH00-8EG0 6FC5 263-0AA03-0AB0

6ES7 357-4AH03-3AE0 6ES7 357-4BH03-3AE0

See Catalog NC 60, NC Z, CA 01 or have a look in the A&D Mall

Front connector 6ES7 357-4CH03-3AE0 40-pin, with screw-type terminals 1 unit 100 units 40-pin, with spring-loaded terminals Battery 6ES7 392-1AM00-0AA0 6ES7 392-1AM00-1AB0 6ES7 392-1BM01-0AA0 6ES7 971-1AA00-0AA0

Siemens ST 70 2003

4/83

SIMATIC S7-300Function modulesFM STEPDRIVE power section

Overview

4

The FM STEPDRIVE power section controls the motion of the stepper motors in the SIMOSTEP 1FL3 series with the utmost precision. In combination with the SINUMERIK 802S control and the FM 353 and FM 357-2 function modules, it performs highly accurate positioning tasks in the lower output range of 600 W.

The FM STEPDRIVE can be used for stepper motors with torques in the 2 Nm (17.702 lb-in) to 15 Nm (132.762 lb-in) range. The FM STEPDRIVE has the same design as the SIMATIC S7-300 family.

Technical specificationsSupply voltage Max. input current Frequency Connection system Supply voltage (signals) Max. input current DC link voltage Pulse interface 115 V /230 V AC 20% selectable 11 A / 5.5 A 47 Hz to 63 Hz Via terminals max. 2.5 mm2 24 V DC (20.4 V to 28.8 V) 1.5 A 325 V 5 V signals 1) 15-pin sub D sokket connector, standard cable 24 V, I/O signals 1) 3 x 325 V (connected to supply) 1.7 A to 6.8 A (adjustable on unit) Weight, approx. Dimensions (W x H x D) Degree of protection to DIN EN 60529 (IEC 60529) Moisture condensation Permissible ambient temperature Storage and transport Operation -40 C to +70 C (-40 F to +158 F) 0 C to +50 C (+32 F to +122 F) with reduction in power, and dependent on mounting position 0.85 kg (1 lb 14 oz) 80 mm x 125 mm x 118 mm (3.15 in x 4.92 in x 4.65 in) Max. cable length Terminals Number of steps/revolution Up to 50 m (164 ft) with 1.5 mm2 Up to 30 m (98 ft 5 in) with 0.75 mm2 For max. 2.5 mm2 Can be set to 500, 1000, 5000, 10000 IP 20, must be installed in cabinet Not permissible

Signal interface Motor connection Phase current

1) Enable signal (enabling of power unit) either 5 V via pulse interface or 24 V via signal interface.

Ordering dataPower section for FM STEPDRIVE stepper motors Sub-D connector 15-pin, female (matching connector, pack of 3)

Order No. 6SN1 227-2ED10-0HA0 6FC9 348-7HX Motor cable EMC tested 10 m 20 m 50 m Connecting cables

Order No.

6FX5 008-5AA00-1BA0 6FX5 008-5AA00-1CA0 6FX5 008-5AA00-1FA0 See Catalog NC Z

4/84

Siemens ST 70 2003

SIMATIC S7-300Function modules1FL3 SIMOSTEP stepper motors

Overview

Stepper motors for the positioning of axes. Simple and favorably priced drive concept for high-precision positioning tasks in the output range up to 600 W Applications: - Positioning drives in general automation systems - Positioning drives in processing plants - Positioning in the basic handling area

Optionally with holding brake for fixing the position after switching off the motor. Can be used with the positioning modules FM 353 and FM 357-2 via FM STEPDRIVE

4

Technical specificationsMotor type Motor voltage Insulation according to EN 60034-1 (IEC 60034-1) 3-phase stepper motor 325 V Temperature class F for a winding temperature of T = 100 K at an ambient temperature of +40 C (+104F) IM B5 (IM V1, IM V3) IP 56; IP 41 on shaft protrusion Natural air cooling -40 C to +70 C 0 C to +40 C 5.3 kHz (at 1FL304.) 4.3 kHz (at 1FL306.) Number of steps/revolution Max. speed Step angle in degrees Systematic angle tolerance (measured at 1000 steps/revolution) 500/1000/5000/10000 adjustable via FM STEPDRIVE 6000 rpm 0.72/0.36/0.072/0.036 Rotational accuracy, concentricity and axial runout according to DIN 42955 (IEC 60072-1) Vibration severity according to EN 60034-14 (IEC 60034-14) Sound pressure level max. EN 21680 Permissible dynamic shaft load Axial, approx. Radial, approx. Shaft end Plain shaft with 1FL304. Fitted key with 1FL306. 60 N (on half shaft protrusion, engaged from the motor flange) 100 N (with 1FL3041, 1FL3042) 110 N (with 1FL3043) 300 N (with 1FL3061,1FL3062) Tolerance N (Normal)

Type according to DIN 42950 Degree of protection according to IEC 60529 Cooling Permissible ambient temperature Storage and transport Operation Max. pulse frequency

Grade N (Normal) 1FL3041: 65 dB(A) 1FL3042: 72 dB(A) 1FL3043: 75 dB(A) 1FL3061: 69 dB(A) 1FL3062: 72 dB(A) 1FL304.: 50 g 1FL306.: 50 g Black Terminal block

Impact load DIN 40046, T7 Paint finish Connection

6 per step

Technical specifications holding brakeMotor type Rated voltage Minimum holding voltage for released brake Electrical pickup power 1FL304. 24 V 10 V (at the earliest 130 ms after excitation) 24 W 32 W 1FL306. Switching times Release brake Engage brake Connection 35 ms 15 ms 65 ms 15 ms

Connector (mating connector in scope of supply)

Ordering dataSIMOSTEP stepper motors 1FL3 2 Nm, shaft diameter 12 mm 4 Nm, shaft diameter 12 mm 6 Nm 10 Nm 15 Nm with holding brake 2 Nm, shaft diameter 12 mm 4 Nm, shaft diameter 12 mm 6 Nm

Order No. SIMOSTEP stepper motors 1FL3 1FL3 041-0AC31-0BK0 1FL3 042-0AC31-0BK0 1FL3 043-0AC31-0BG0 1FL3 061-0AC31-0BG0 1FL3 062-0AC31-0BG0 1FL3 041-0AC31-0BJ0 1FL3 042-0AC31-0BJ0 1FL3 043-0AC31-0BH0 with holding brake (continued) 10 Nm 15 Nm Motor cable EMC tested, for connecting to FM STEPDRIVE 10 m 20 m 50 m

Order No.

1FL3 061-0AC31-0BH0 1FL3 062-0AC31-0BH0

6FX5 008-5AA00-1BA0 6FX5 008-5AA00-1CA0 6FX5 008-5AA00-1FA0 Siemens ST 70 2003

4/85

SIMATIC S7-300Function modulesFM 355 closed-loop control module

Overview

4-channel closed-loop control module for universal closed-loop control tasks Used for temperature, pressure, flowrate and fill-level control loops

2 versions: - FM 355 C as continuousaction controller; - FM 355 S as step or pulse controller With 4 analog outputs (FM 355 C) or 8 digital outputs (FM 355 S) for direct control of the most common types of actuator Continued operation of the control loop is possible even after a CPU stop or failure

4

User-friendly online self-optimization for temperature controls Preprogrammed controller structures 2 control algorithms

Technical specificationsNumber of controllers General specifications Rated load voltage L+ Permitted range Electrical isolation To backplane bus Between channels Permissible potential difference between input (frame terminal and the central grounding point) Between analog inputs and NANA (UCM ) Isolation tested at Current consumption From backplane bus, typ./max. From L+ (without load) - FM 355 C, typ. - FM 355 C, max. - FM 355 S, typ. - FM 355 S, max. Total current of the digital outputs, max. Power loss FM 355 C, typ. FM 355 C, max. FM 355 S, typ. FM 355 S, max. Required front connector Dimensions (W x H x D) in mm Weight, approx. Digital inputs Number of inputs Input voltage Rated value At 0 signal At 1 signal 24 V DC -3 to +5 V 13 to 30 V 8 6.5 W 7.8 W 5.5 W 6.9 W 2 x 20-pin 80 x 125 x 120 470 g 260 mA 310 mA 220 mA 270 mA 400 mA 50 mA/75 mA 75 V DC, 60 V AC 2.5 V DC 500 V DC Yes (optocoupler) No 24 V DC 20.4 to 28.8 V 4 Input current at 1 signal, typ. Input characteristic Connection of two-wire BEROs Permissible quiescent current, max. Line length Unshielded Shielded Digital outputs Number Output voltage At 1 signal Output current At 1 signal - rated value - permitted range At 0 signal, residual current, max. Load resistance Output power Lamp load, max. Switch 2 outputs in parallel Setting a digital input Switching frequency With resistive load/lamp load, max. 100 Hz Inductive loads, max. Voltage induced on circuit interruption limited to (internally), typ. Short-circuit protection of output Line length Unshielded Shielded Analog inputs Number of inputs 4 600 m 1000 m 0.5 Hz L+(-1.5 V) Yes, electronic 5W For logic operations Possible 0.1 A 5 to 150 mA 0.5 mA 240 to 4 k L+ (-2.5 V) 8 (only FM 355S) 600 m 1000 m 7 mA In accordance with ICE 1131, type 2 Possible 1.5 mA

4/86

Siemens ST 70 2003


Technical specifications (continued)Number of controllers Input range (rated values/ display range/ input resistance) Voltage +/- 80 mV; -80 to +80 mV/10 M; 0 to 10V/ -1.75 to 11.75V/ 100 k 0 to 20 mA/-3.5 to 23.5 mA/ 50 4 to 20 mA/ 0 to 23.5 mA; 50 B/0 to 13.81 mV/10 M J/-8.1 to 69.54 mV/ 10 M K/-6.54 mV to 54.88/ 10 M R/-0.23 to 21.11 mV/10 M S/-0.24 to 18.7 mV/10 M Pt 100/30.82 to 650.46 mV/ 10 M Integrating 12 or 14 bit, parameterizable 16 2/3 ms at 60 Hz 20 ms at 50 Hz 100 ms at 50 and 60 Hz 0.1 ms 3.3 ms 0.5 ms Yes, parameterizable 20 V 40 mA For voltage measurement and for current measurement (as 4-wire transducers) Yes, parameterizable Type B, J, K, R, S Pt 100 (standard range) Yes, parameterizable (internal and external with Pt 100) Load resistor Voltage outputs, min. - capacitive load, max. Current outputs, max. - inductive load, max. Voltage output Short-circuit protection Short-circuit current, max. Current output Idle voltage, max. Connection of actuators For voltage output For current output Operating error limit (in the entire temperature range of the modules, relative to input range) Voltage Current Basic error threshold (operating error threshold at 25 C, with reference to output range) Voltage Current 70 dB 40 dB Temperature Linearity error Cable length (shielded) +/- 0.2% +/- 0.3% +/- 0.02%/K +/- 0.05% 200 m, 50m at 80 mV with thermocouples +/- 0.5% +/- 0.6% 2-lead connection 2-lead connection 18 V Yes 25 mA 1 k 1 F 500 1 mH Operational limit (in the entire temperature range, referred to input range) Basic error limit (operating error limit at 25 C, referred to the input range) Temperature error (referred to input range) Linearity error (referred to input range) Cable length (shielded) Analog outputs Number Output ranges 4 (only FM 355C) +/-10 V / 0 to 10 V 0 to 20 mA, 4 to 20 mA +/-0.6 to +/-1%

+/-0.4 to +/-0.6%

Current

+/-0.005%/K +/-0.05% 200 m, 50 m at 80 mV with thermocouples

4

Thermocouple type

Resistance thermometer Principle of measurement Resolution (including overrange) Conversion time per analog input At 12 bit At 14 bit Transient recovery time For resistive load Capacitive loads Inductive loads Substitute values injectable Permissible input voltage for voltage input (destruction limit) Permissible input current for current input (destruction limit) Connection for transducer

Linearization of characteristic For thermocouples For resistance thermometers Temperature compensation Noise voltage suppression for f = n x (fl +/- 1 %), fl = noise frequency Common-mode noise, min. (Vpp < 2.5 V) Series-mode noise, min. (peak value of fault < rated value of input range)

Siemens ST 70 2003

4/87


Technical specifications function blocksFB Memory requirements FB length in load memory PID_FM 1.976 byte 464 byte 790 byte 644 byte 420 byte 1.074 byte 354 byte DB length in load memory 490 byte 172 byte 214 byte 184 byte 178 byte 410 byte 130 byte Runtimes in S7-300/C7 (for CPU 314, C7-623/624) 0.65 ms 2.1 ms 2.2 ms 2.5 ms 2.3 ms 4.3 ms 1.8 ms in S7-400 (for CPU 414) 0.077 ms 1.9 ms 2.0 ms 2.2 ms 2.1 ms 3.8 ms 1.6 ms

4

FUZ_355 FORCE355 READ_355 CH_DIAG PID_PAR CJ_T_PAR Target system

SIMATIC S7-300 (from CPU 314), S7-400, C7

Ordering dataFM 355 C closed-loop control module with 8 digital outputs for 4 step or pulse controllers FM 355 S closed-loop control module with 4 analog outputs for 4 continuous-action controllers FM 355 manual Manual and Getting Started German English French Italian Front connector 20-pin, with screw-type terminals 1 unit 100 units 20-pin, with spring-loaded terminals Bus connector 1 unit (spare part)

Order No. 6ES7 355-0VH10-0AE0 Labelling strips 10 units (spare part) S7-SmartLabel 6ES7 355-1VH10-0AE0 Software for machine labelling of modules directly from the STEP 7 project Labelling sheets for machine labelling Slot number label 6ES7 355-0VH00-8AA0 6ES7 355-0VH00-8BA0 6ES7 355-0VH00-8CA0 6ES7 355-0VH00-8EA0 Spare part Shield connecting element 80 mm wide, with 2 rows for 4 terminal elements each Terminal elements 2 units 6ES7 392-1AJ00-0AA0 6ES7 392-1AJ00-1AB0 6ES7 392-1BJ00-0AA0 6ES7 390-0AA00-0AA0 For 2 cables with 2 to 6 mm diameter For 1 cable with 3 to 8 mm diameter For 1 cable with 4 to 13 mm diameter

Order No. 6ES7 392-2XX00-0AA0

2XV9 450-1SL00-0YX0


6ES7 390-5AA00-0AA0


4/88

Siemens ST 70 2003

SIMATIC S7-300Function modulesFM 355-2 closed-loop control module

Overview

4-channel closed-loop control module specially for temperature controls With convenient, integrated online self-optimization Heating and cooling controls as well as combined controls with a heating and active cooling function can be implemented Ready-to-use controllers

2 versions: - FM 355-2 C as a continuous-action controller; - FM 355-2 S as a step-action or pulse controller With 4 analog outputs (FM 355-2 C) or 8 digital outputs (FM 355-2 S) for direct control of the most commonly used final control elements The controller will continue to operate in the event of a CPU Stop or CPU failure

4

Technical specificationsNumber of controllers General specifications Rated load voltage L+ Permitted range Electrical isolation To backplane bus Between channels Permissible potential difference Between input (frame terminal and the central grounding point) Between analog inputs and NANA (UCM ) Isolation tested at Current consumption From backplane bus, typ./max. From L+ (without load) - FM 355-2 C, typ. - FM 355-2 C, max. - FM 355-2 S, typ. - FM 355-2 S, max. Total current of the digital outputs, max. Power loss FM 355-2 C, typ. FM 355-2 C, max. FM 355-2 S, typ. FM 355-2 S, max. Required front connector Dimensions (W x H x D) in mm Weight, approx. Digital inputs Number Input voltage Rated value At 0 signal At 1 signal Input current at 1 signal, typ. Input characteristic 24 V DC -3 to +5 V 13 to 30 V 7 mA In accordance with ICE 1131, Typ 2 8 6.5 W 7.8 W 5.5 W 6.9 W 2 x 20-pin 80 x 125 x 120 470 g 260 mA 310 mA 220 mA 270 mA 400 mA 50 mA/75 mA 75 V DC, 60 V AC 2.5 V DC 500 V DC Yes (optocoupler) No 24 V DC 20.4 to 28.8 V 4 Connection of two-wire BEROs Permissible quiescent current, max. Line length Unshielded Shielded Digital outputs Number of inputs Output voltage At signal 1 Output current At 1 signal - rated value - permitted range At 0 signal, residual current, max. Load resistance Output power Lamp load, max. Switch 2 outputs in parallel Setting a digital input Switching frequency With resistive load/lamp load, max. 100 Hz Inductive loads, max. Voltage induced on circuit interruption limited to (internally), typ. Short-circuit protection of output Line length Unshielded Shielded Analog inputs Number of inputs Input range (rated values/ display range/ input resistance) Voltage Current 0 to 10V/ -1.75 to 11.75V/ 100 k 0 to 20 mA/ -3.5 to 23.5 mA/50 4 to 20 mA/ 0 to 23.5 mA; 50 4 600 m 1000 m 0.5 Hz L+(-1.5 V) Yes, electronic 5W For logic operations Possible 0.1 A 5 to 150 mA 0.5 mA 240 to 4 k L+ (-2.5 V) 8 (only FM 355-2S) 600 m 1000 m Possible 1.5 mA

Siemens ST 70 2003

4/89


Technical specifications (continued) Thermocouple type B/0 to 13.81 mV/10 M E/ -9.84 to 76.36mV/ 10 M J/-8.1 to 69.54 mV/10 M K/-6.54 mV to 54.88/10 M R/-0.23 to 21.11 mV/10 M S/-0.24 to 18.7 mV/10 M Pt 100/30.82 to 650.46 mV/ 10 M Integrating 14-bit 100 ms at 50 and 60 Hz 0.1 ms 3.3 ms 0.5 ms Yes, parameterizable 20 V 40 mA For voltage measurement and for current measurement (as 4-wire transducers) Yes, parameterizable Type B,E, J, K, R, S Pt 100 (standard range) Yes, parameterizable, via internal sensor or externally with Pt 100 Load resistor Voltage outputs, min. - capacitive load, max. Current outputs, max. - inductive load, max. Voltage output Short-circuit protection Short-circuit current, max. Current output Idle voltage, max. Connection of actuators For voltage output For current output Operating error limit (in the entire temperature range of the modules, relative to input range) Voltage Current Basic error threshold (operating error threshold at 25 C, with reference to output range) Voltage Current Temperature Linearity error Cable length (shielded) +/- 0.2% +/- 0.3% +/- 0.02%/K +/- 0.05% 200 m, 50m at 80 mV and thermocouples +/- 0.5% +/- 0.6% 2-lead connection 2-lead connection 18 V Yes 25 mA 1 k 1 F 500 1 mH Basic error limit (operating error limit at 25 C, referred to the input range) Temperature error (referred to input range) Linearity error (referred to input range) Cable length (shielded) Analog outputs Number of inputs Output ranges 4 (only FM 355-2C) +/-10 V / 0 to 10 V 0 to 20 mA, 4 to 20 mA +/-0.04 to +/-0.5%

+/-0.005%/K +/-0.05% 200 m, 50m at 80 mV and thermocouples

4

Resistance thermometer Principle of measurement Resolution (including overrange) Conversion time per analog input Transient recovery time For resistive load Capacitive loads Inductive loads Substitute values injectable Permissible input voltage for voltage input (destruction limit) Permissible input current for current input (destruction limit) Connection for transducer

Linearization of characteristic For thermocouples For resistance thermometers Temperature compensation Noise voltage suppression for f = n x (fl +/- 1 %), fl = noise frequency Common-mode noise, min. (Vpp < 2.5 V) Series-mode noise, min. (peak value of fault < rated value of input range) Operational limit (in the entire temperature range, referred to input range)

70 dB 40 dB

+/-0.06 to +/-0.7%

4/90

Siemens ST 70 2003


Technical specifications, function blocksFB Memory requirements FB length in load memory FMT_PID FMT_PAR FMT_CJ_T FMT_DS1 FMT_TUN FMT_PV READ_PV =TRUE LOAD_PV=TRUE Target system SIMATIC S7-300 (from CPU 314), S7-400, C7 1.804 byte 324 byte 410 byte 216 byte 332 byte 1108 byte DB length in load memory 490 byte 172 byte 214 byte 184 byte 178 byte 410 byte Runtimes in S7-300/C7 (for CPU 315-2DP) 0.65 7.41 ms1) 1.7 ms 1.8 ms 1.9 ms 4.5 ms 4.3 ms 3.2 ms 2.9 ms in S7-400 (for CPU 416-2DP) 0.04 0.82 ms1) 0.19 ms 0.19 ms 0.19 ms 0.19 ms 3.8 ms 0.28 ms 0.35 ms

4

1) Dependent on the parameterization of READ_OUT, LOAD_OP and LOAD_PAR (READ_PAR)

Ordering dataFM 355-2 C temperature closed-loop control module with 8 digital outputs for 4 step or pulse controllers FM 355-2 S temperature closed-loop control module with 4 analog outputs for 4 continuous-action controllers Front connector 20-pin, with screw-type terminals 1 unit 100 units 20-pin, with spring-loaded terminals Bus connector 1 unit (spare part) Labelling strips 10 units (spare part)

Order No. 6ES7 355-2CH00-0AE0 S7-SmartLabel Software for machine labelling of modules directly from the STEP 7 project 6ES7 355-2SH00-0AE0 Labelling sheets for machine labelling Slot number label Spare part Shield connecting element 6ES7 392-1AJ00-0AA0 6ES7 392-1AJ00-1AB0 6ES7 392-1BJ00-0AA0 6ES7 390-0AA00-0AA0 80 mm wide, with 2 rows for 4 terminal elements each Terminal elements 2 units For 2 cables with 2 to 6 mm diameter For 1 cable with 3 to 8 mm diameter For ,1 cable with 4 to 13 mm diameter

Order No. 2XV9 450-1SL00-0YX0


6ES7 390-5AA00-0AA0


6ES7 392-2XX00-0AA0

Siemens ST 70 2003

4/91

SIMATIC S7-300Function modulesSM 338 ultrasonic position encoder module

Overview

An ultrasonic measuring system comprises: SIMATIC S7-300 with CPU and power supply The SM 338 ultrasonic position decoding module

4

One power supply for all sensors that are simultaneously connected to the SM 338 module: +/- 15 V / max. 200 mA floating or +24 V / max. 300 mA floating. For a sensor length of less than 3 m, the resolution is 0.05 mm. At the maximum sensor length of 6 m, the resolution is 0.1 mm. With more than one measuring point on a sensor, the sensor-specific minimum spacing must be complied with. This ensures that there is no mutual interference between the measuring points.

24 V external supply voltage Ultrasonic position sensor(s) Ultrasonic position sensors with the following characteristics can be used: START/STOP interface with RS 422 signals

Technical specificationsPosition sensors Number Max no. of measuring points Measuring range Resolution Programmable measuring cycle Supply voltage for sensors With Electrical isolation - voltage - current Without electrical isolation - voltage - current, total Total power for supplying the sensors max. Supply voltage for the module Current consumption Internal from S7-300 backplane bus External voltage Without sensors max. With sensors max. Fuse Typ. 80 mA; max. 1000 mA, 20.4 V to 28.8 V 0.1 A 0.85 A 1.0 A slow-acting 24 V 300 mA, without electrical isolation 7.2 W Up to 4 8, up to 4 per sensor 3 m and 6 m 0.05 mm (up to 3 m measuring range) and 0.1 mm 0.5 ms to 16 ms Polarity reversal protection Operating conditions Ambient temperature Horizontal mounting position for vertical installation Relative air humidity Atmospheric pressure Pollutant concentration SO2 max. H2S max. Vibration 10 Hz to 57 Hz 57 Hz to 150 Hz Conditions for storage and transport (in original packaging) Free fall (to IEC 1131-2) Temperature (to IEC 1131-2) Atmospheric pressure Relative air humidity Casing Dimensions (W x H x D in mm) Weight Degree of protection 80 x 125 x 120 500 g IP 20 Order No. SM 388 ultrasonic position encoder module manual German English 6ES7 390-0AA00-0AA0 Configuration package for SM 338 comprising manual, parameterization forms and example programs (German, English) 6ES7 338-7UH00-8AC0 6ES7 338-7UH00-8BC0 6AT1 733-8DA00-0YA0 41 single-channel > 82 two-channel < 4010 with Ex(i) interface > 87 < 4010 Up to 4 mV/V -1.5 to +42.5 mV 10.3 V DC Serial interface 2 Transmission rate Parity No. of data bit / stop bit Signal level Protocols Binary inputs Binary outputs Analog output Output range Total error at 25 C Update rate Resolution Burden including line resistance 1000 m (300 m in Ex area1)) Climatic requirements Tmin(IND) to Tmax(IND) (operating temperature) EMC requirements in accordants with MTBF (SN 29500) vertical installation: 0 to +60 C horizontal installation: 0 to +40 C NAMUR NE21, Part 1 89/386/EEC >350,000 h TTY: 9600 bps Even/odd/without 8/1 Passive, floating Remote display protocol for digital remote displays

240 mA single-channel 120 mA two-channel

4

Function included Function not included 1) Up to 1000 m, depending on the gas group.

Ordering dataSIWAREX U weighing module Single-channel version for connection of one balance Two-channel version for connection of two balance Configuring package incl. SIWATOOL parameterization software, manual on CD-ROM and example programs SIWAREX U manual German English Junction box JB for connecting together max. 4 load cells 9-conductor cable to connect SIWAREX U to 9-pin PC interface (RS 232C)

Order No. Cable LI2Y (ST) 7MH4 601-1AA01 7MH4 601-1BA01 7MH4 683-3AA63 to connect SIWAREX U to junction boxes Front connector 20-pin, with screw-type terminals 1 unit 100 units 20-pin, with spring-loaded terminals 7MH4 693-3AA11 7MH4 693-3AA21 7MH4 710-1BA Shield connecting element 7MH4 607-8CA 80 mm wide, with 2 rows for 4 terminal elements each Terminal elements 2 units For 1 cable with 4 to 13 mm diameter Labelling strips 10 units (spare part)

Order No. 7MH4 702-8AB

6ES7 392-1AJ00-0AA0 6ES7 392-1AJ00-1AB0 6ES7 392-1BJ00-0AA0 6ES7 392-2XX00-0AA0

6ES7 390-5AA00-0AA0

6ES7 390-5CA00-0AA0

Siemens ST 70 2003

4/95

SIMATIC S7-300Function modulesSIWAREX M

Overview

SIWAREX M is a weighing and proportioning system with verification capability for maximum accuracy requirements. The main applications of SIWAREX M include: Fill level scales with verification capability Platform scales and vehicle scales with verification capability Single component scales Multi-component scales

Proportioning scales with verification capability Scales for potentially explosive areas (can be implemented by using an Ex(i) interface) Weight encoders for other types of scales (e.g. differential proportioning scales, etc.)

4

Technical specificationsMain applications Load measurement on cranes Overload protection Belt tensioning devices Platform scales Fill level measurement (container/bins) Proportioning and mixing scales Scales with verification capacity Intrinsically safe load cell powering Stand-alone (without SIMATIC) Integration in: S5-90/S5-95U/S5-100U S5-95U/DP (PROFIBUS master) S5-115U/S5-135U/S5-155U S7-300 S7-400 PCS 7 M7-300 M7-400 C7 TELEPERM M (AS 388/488/TM) Communication interfaces Process interfaces Digital inputs Digital outputs Pulse input Analog output/analog input Remote display connection (via serial interface) 3 (assignable) 4 (assignable) / (with verification capability) gross/net/setpoint remote display with operator control (verification capability) UL/CSA/FM approval IP degree of protection to DIN EN 60 529; IEC 60 529 Via RS 232/TTY + CP Via RS 232/TTY + CP Via ET 200M Direct integration via ET 200M via ET 200M Via IM or ET 200M Via ET 200M SIMATIC S7 (P bus) RS 232, TTY Optional (Ex-l) Measuring properties Class III EU type approval for commercial scales (with verification capability) Accuracy (definition acc. to measuring technology) nIND acc. to EN 45 501 min. measuring signal umin pro d (*) no verification capability Internal resolution Data format for weight values No. of measurements/second Filters Scale functions Weight values Limit Scale standstill Zero setting function Proportioning functions Control of coarse/fine flow valves Tolerance monitoring Material flow monitoring Automatic proportioning optimization Automatic reproportioning Inching mode Integral display and operator panel Module parameterization Via SIMATIC S5/S7/C7 or SIWATOOL M PC parameterization software Yes In S7 frame: IP 20 Stand-alone: IP 10 Gross/net/tare 4 (min/max/empty/overfill) Via command and automatically 6000 d

0.01% 6000 0.5 V

524,2884 byte (fixed point) 50 Exponent filter: 0.05 to 5 Hz Mean value filter

Printer connection Function included Function not included

4/96

Siemens ST 70 2003

SIMATIC S7-300Function modulesSIWAREX M

Technical specifications (continued) Load cell supply Supply voltage Us (rated value) Max. supply current Permissible load resistance: - RLmin - RLmax - RLmin - RLmax Permissible load cell characteristics Perm. range of measurement signal (with largest characteristic value set) Max. distance of load cells Voltage supply DC 24 V Rated voltage Max. current consumption Voltage supply from backplane bus Serial interface 1 Transmission rate Parity No. of data bit / stop bit Signal level Protocols Serial interface 2 Transmission rate Parity No. of data bit / stop bit 24 V DC 300 mA Typ. 50 mA RS 232: 2400/9600 bps Even/odd 8/1 In acc. with EIA-RS 232 SIWAREX-Protokoll 3964R, XON/XOFF (printer) 2) TTY: 9600 bps Even 8/1 MTBF (SN 29500) > 60 single-channel < 4010 with Ex(i) interface: > 87 < 4010 Up to 4 m V/V -41.5 to 41.5 mV Analog output Output range Total error at 25 C 1000 m 300 m in Ex area1) Update rate Resolution Burden including line resistance Climatic requirements Tmin(IND) to Tmax(IND) (opperating temperature) EMC requirements in accordance with 0/4 to 20 mA 0.15% Approx. 350 ms 16 bit (0-20 mA) Binary outputs Binary inputs 10.2 V DC Serial interface 2 Signal level Protocols TTY: Active/passive (floating) Remote display protocol SIWAREX protocol 3964R Number:3 rated voltage: 24 V switching frequency: 10 Hz Number: 4 (digital) rated voltage: 24 V rated current: 0.5 A total max.: 1 A isolation: 500 V

180 mA

4

600 Vertical installation: -10 to +60 C horizontal installation/with verification-capability: -10 to +40 C NAMUR NE21, Part 1 90/384/EWG 89/386/EWG 172 000 h at +40C

1) Up to 1000 m, depending on the gas group. 2) Serial printer, ANSI-, EPSON-, IBM-compatible

Ordering dataSIWAREX M weighing module with verification capability Configuring package incl. SIWATOOL parameterization software, manual on CD-ROM and example programs SIWAREX M manual German English Junction box JB for connecting max. 4 load cells 9-conductor cable to connect SIWAREX M to 9-pin PC interface (RS 232C) 2m 5m

Order No. 7MH4 553-1AA41 Cable LI2Y (ST) to connect SIWAREX M to junction boxes 7MH4 583-3FA63 Front connector 20-pin, with screw-type terminals 1 unit 100 units 7MH4 593-3AA11 7MH4 593-3AA21 7MH4 710-1BA 20-pin, with spring-loaded terminals Labelling strips 10 units (spare part) Shield connecting element 80 mm wide, with 2 rows for 4 terminal elements each 7MH4 702-8CA 7MH4 702-8CB Terminal elements 2 units For 1 cable with 4 to 13 mm diameter



6ES7 390-5AA00-0AA0

6ES7 390-5CA00-0AA0

Siemens ST 70 2003

4/97

SIMATIC S7-300Function modulesSIWAREX A

Overview

4

SIWAREX A is a weighing and proportioning system with verification capability for maximum accuracy requirements and fast processes. The main applications of SIWAREX A include: Filling plants Bagging scales Single component scales

Multi-component scales Filling scales with verification capability Scales for potentially explosive areas (can be implemented by using an Ex(i) interface).

Technical specificationsMain applications Load measurement on cranes Overload protection Belt tensioning devices Platform scales Fill level measurement (containers/bins) Propoortioning and mixing scales Scales with verification capability Intrinsically-safe load cell powering Stand-alone (without SIMATIC) Integration in S5-90/-95U/-100U S5-95U/DP (PROFIBUS-master) S5-115U/-135U/-155U S7-300 S7-400 PCS 7 M7-300 M7-400 C7 TELEPERM M (AS 388/488/TM) Communication interfaces Process interfaces Digital input Digital output Pulse input Analog output/analog input Remote display connection (via serial interface) Printer connection Measuring properties Class III EU type approval for commercial scales (with verification capability) 6000 d (2 x 6000 d) - RLmin - RLmax 3 4 / (verification capability) Gross/net (verification capability) Direct integration Via ET 200M Via IM or ET 200M SIMATIC S7 (P-Bus) RS 232, TTY Optional (Ex-l) Accuracy (definition in acc. with measuring technology) nIND in acc. with EN 45 501 Min. measuring signal umin pro d (*) no verification capability Internal resolution Data format for weight values No. of measurements/second Filters Scale functions Weight values Limits Scales standstill Zero setting function Proportioning functions Control of coarse/fine flow valves Tolerance monitoring Material flow monitoring Autom. proportioning optimization Automatic reproportioning Inching mode Integral display and operator panel Module parameterization UL/CSA/FM approval IP degree of protection to DIN EN 60 529; IEC 60 529 Load cell supply Supply voltage Us (rated value) Max. supply current Permiss. load resistance: - RLmin - RLmax > 60 < 4010 With Ex(i) interface: > 87 < 4010 10.2 V DC Via SIMATIC S7 or SIWATOOL A PC-parameterization software In S7 frame: IP 20 Stand-alone: IP 10 Gross/net Via command or automatically 0.01% 6000 0.5 V 1,048,576 4 byte (fixed point) 50 Mean value filter, 4 stages

180 mA

Function included Function not included

4/98

Siemens ST 70 2003

SIMATIC S7-300Function modulesSIWAREX A

Technical specifications (continued)Main application Perm. load cell characteristic Perm. range of measurement signal (with largest characteristic value set) Max. distance of load cells Voltage supply 24 V DC Rated voltage Max. current consumption Voltage supply from backplane bus Serial interface 1 Transmission rate Parity No. of data bit / stop bit Signal level Protocol Serial interface 2 Transmission rate Parity No. of data bit / stop bit Signal level Protocol 24 V DC 300 mA Typ. 50 mA RS 232: 2400/9600 Baud Even/odd 8/1 In acc. with EIA-RS 232 SIWAREX protocol XON/XOFF (printer)2) TTY: 9600 bps Even 8/1 Active/passive (floating) Remote display protocol SIWAREX protocol MTBF (SN 29500) Analog output Output range Total error at 25 C Update rate Resolution Burden including line resistance Climatic requirements Tmin(IND) to Tmax(IND) (operating temperature) 0/4-20 mA 0.15% Approx. 350 ms 16 bit (0-20 mA) Up to 4 mV/V -1.5 to +41.5 mV Binary outputs 1000 m 300 m in Ex area1) Binary inputs Number:3 Rated voltage: 24 V Switching frequency: 10 Hz Number: 4 (digital) Rated voltage: 24 V Rated current: 0.5 A Total max.: 1 A Isolation: 500 V

4

600 vertical installation: -10 to +60 C horizontal installation/ with verification capability: -10 to +40 C NAMUR NE21, Part 1 90/384/EWG 89/386/EWG > 172 000 h at +40C

EMC requirements in accordance with

1) Up to 1000 m, depending on the gas group. 2) Serial printer, ANSI-, EPSON-, IBM-compatible

Ordering dataSIWAREX A weighing module with verification capability, for maximum accuracy and fast processes Configuring package incl. SIWATOOL parameterization software, manual on CD-ROM and example programs SIWAREX M manual German English Junction box JB for connecting together max. 4 load cells 9-conductor cable to connect SIWAREX A to 9-pin PC interface (RS 232C) 2m 5m

Order No. 7MH4 421-1AA01 Cable LI2Y (ST) to connect SIWAREX M to junction boxes Front connector 7MH4 483-3DA63 20-pin, with screw-type terminals 1 unit 100 units 20-pin, with spring-loaded terminals Labelling strips 10 units (spare part) Shield connecting element 80 mm wide, with 2 rows for 4 terminal elements each Terminal elements 7MH4 702-8CA 7MH4 702-8CB 2 units For 1 cable with 4 to 13 mm diameter



7MH4 593-3AA11 7MH4 593-3AA21 7MH4 710-1BA

6ES7 390-5AA00-0AA0

6ES7 390-5CA00-0AA0

Siemens ST 70 2003

4/99

SIMATIC S7-300Special modulesSM 374 simulator

Overview

Simulator module for testing programs during startup and operation For simulation of sensor signals using switches

4

For indicating signal statuses at the outputs using LEDs

Technical specificationsInputs Outputs Electrical isolation Power consumption max. 16 switches 16 LEDs No 80 mA Order-No. 6ES7 374-2XH01-0AA0 Labelling strips 10 units (spare part) S7-SmartLabel 6ES7 390-0AA00-0AA0 Labelling cover 10 units (spare part) Order No. 6ES7 392-2XX00-0AA0 See page 4/91 6ES7 392-2XY00-0AA0 Power losses, typ. Dimensions (W x H x D) in mm Weight, approx. 0.35 W 40 x 125 x 120 190 g

Ordering dataSM 374 simulator module incl. bus connector and labelling strips Bus connector 1 unit (spare part)

DM 370 dummy module

Overview

Dummy module for reserving slots for non-parameterized signal modules Structure and address allocation is retained when replaced with a signal module

Technical specificationsCurrent consumption From backplane bus, max. Power losses, typ. 5 mA 0.03 W Order No. 6ES7 370-0AA01-0AA0 Labelling strips S7-SmartLabel See above Labelling cover Order No. See above See page 4/91 See above Dimensions (W x H x D) in mm Weight 40 x 125 x 120 180 g

Ordering dataDM 370 dummy module incl. bus connector and labelling strips Bus connector

4/100

Siemens ST 70 2003

SIMATIC S7-300CommunicationCP 340

Overview

The economical complete solution for serial communications via point-to-point links. 3 versions with different physical properties: - RS 232C (V.24) - 20 mA (TTY) - RS 422/RS 485 (X.27)

Implemented protocols: - ASCII, 3964 (R) and - Printer driver Simple parameterization by means of a parameterization tool integrated inSTEP7

4

Technical specificationsCP 340 Version Interfaces Number of inputs Transmission rate max. Transmission rate min. Cable length, max. ASCII: Max. frame length Transmission rate, max. 3964 (R): Max. frame length Transmission rate, max.. 1, electrical isolation 19.2 kbit/s 2.4 kbit/s 15 m 1024 byte 9.6 kbit/s 1024 byte 19.2 kbit/s 9.6 kbit/s 2.4 kbit/s 100 m /1000 m (act./passive) 19.2 kbit/s 2.4 kbit/s 1200 m RS 232 (V.24) 20 mA (TTY) RS 422/485 (X.27)

Printer driver: Transmission rate, max. 9.6 kbit/s HP-Deskjet, HP-Laserjet, IBM-Proprinter, user-defined Supported printers Memory requirements of the handling blocks, approx. 2700 byte (data communications, sending and receiving) Current consumption typ. Power loss Dimensions (W x H x D) in mm Weight, approx. 165 mA 0.85 W 40 x 125 x 120 300 g 220 mA 165 mA

Ordering dataCP 340 communications processor with one RS 232 C (V.24) interface RS 232 connecting cable for linking to SIMATIC S7 5m 10 m 15 m CP 340 communications processor with one 20 mA (TTY) interface 20 mA (TTY) connecting cable for linking to SIMATIC S7 5m 10 m 50 m

Order No. 6ES7 340-1AH01-0AE0 CP 340 communications processor with one RS 422/485 (X.27) interface RS 422/485 connecting cable 6ES7 902-1AB00-0AA0 6ES7 902-1AC00-0AA0 6ES7 902-1AD00-0AA0 6ES7 340-1BH00-0AE0 for linking to SIMATIC S7 5m 10 m 50 m

Order No. 6ES7 340-1CH00-0AE0

6ES7 902-3AB00-0AA0 6ES7 902-3AC00-0AA0 6ES7 902-3AG00-0AA0


Siemens ST 70 2003

4/101


Overview

For powerful, high-speed serial communications via point-to-point links 3 versions with different physical properties: - RS 232C (V.24), - 20 mA (TTY), - RS 422/RS 485 (X.27)

Implemented protocols: ASCII, 3964 (R), RK 512, customer-specific protocols (reloadable) Simple parameterization via a parameterization tool integrated in STEP 7

4

Technical specificationsVersion Interfaces Number of inputs Transmission rate - Max. - Min. Cable length, max. Connection technique Implemented protocol driver 76.8 kbit/s 0.3 kbit/s 15 m 9-pin Sub-D male 19.2 kbit/s 0.3 kbit/s 1000 m 9-pin Sub-D female 76.8 kbit/s 0.3 kbit/s 1200 m 15-pin Sub-D socket connector 1, electrical isolation RS 232C (V.24) 20 mA (TTY) RS 422/485 (X.27)

ASCII; 3964 (R) (not with RS 485); RK 512 (not with RS 485); customized driver can be loaded 1024 byte 76.8 kbit/s (half-duplex) / 38.4 kbit/s (full-duplex) 1024 byte 76.8 kbit/s 1024 byte 76.8 kbit/s 5500 byte (data communication, sending and receiving) 24 V DC (3 screw-type terminals: L+, M, GND) 200 mA 70 mA 4.8 W 40 x 125 x 120 300 g 200 mA 70 mA 4.8 W 240 mA 70 mA 5.8 W

ASCII Max. frame length Transmission rate, max. 3964 (R) Max. frame length Transmission rate, max. RK 512 Max. frame length Transmission rate, max. Memory requirements of the function blocks, approx. External voltage supply Current consumption typ. From backplane bus, max. Power loss Dimensions (W x H x D) in mm Weight, approx.

4/102

Siemens ST 70 2003


Technical specifications available driversMODBUS Master MODBUS protocol with RTU format Master/slave coupling: SIMATIC S7 is the master Implemented function codes: 01, 02, 03, 04, 05, 06, 07, 08, 11,12,15,16 No RS 232 C (V.24) control and signaling lines CRC polynomial: X16 + x15 + x2 +1 Interfaces: TTY (20 mA); V.24 (RS 232 C); X.27 (RS 422, 2-wire or 4-wire/RS 485, 2-wire) Receive location specified at BRCV Character delay time 3.5 characters or multiples thereof Broadcast message possible Parameters to be set Transmission rate 300 bit/s up to 76800 bit/s; ( TTY up to 19200 bit/s) Character frame With/without RS 485 mode for 2-wire connections With/without modem operation (ignore scratch characters) Response monitoring time 100 ms to 25.5 s in 100 ms steps Factor for character delay time 1-10 Reservation of the receive line when using the X.27 interface module MODBUS Slave MODBUS protocol with RTU format Master/slave coupling: SIMATIC S7 is the slave Implemented function codes: 01, 02, 03, 04, 05, 06, 08, 15, 16 No V.24 control and signaling line CRC polynomial X16 + x15 + x2 +1 Interfaces: TTY (20 mA), V.24 (RS 232C X.27 (RS 422, 2-wire or 4-wire/RS 485, 2-wire) Communication FB 180, instance DB 180 (using a multi-instance) Parameters to be set Data Highway Data Highway Full Duplex (DF1) protocol Interfaces: TTY (20 mA), V.24 (RS 232C), RS 422 (4-wire) No embedded responses Transmission rate 300 bit/s to 76800 bit/s; ( TTY up to 19200 bit/s) Character frame: 7/8 bit; 1/2 Stop bit; even/odd/no parity Receiving location DB and data word Timeout for acknowledge character: 30 ms to 10 s Number of repeats for NAK: 0 to 5 Number of ENQ requests: 0 to 5 Duplicate Message Transmission-Detection: On or Off Acknowledgement for CP immediately on receipt or only after transfer to the CPU Parameters to be set MODBUS Slave Conversion of the MODBUS data address to S7 data areas. Data areas that can be edited: DB, flags, outputs, inputs, timers, counters Character delay time 3.5 characters or multiples thereof Transmission rate 300 bit/s to 76800 bit/s; ( TTY up to 19200 bit/s) Character frame Slave address of the CP (1 to 255) With/without RS 485 mode for 2-wire connection With/without modem operation (ignore scratch characters) Factor for character delay time 1-10 Number of the work DB (for FB processing) Enabling of memory areas that can be written by the master Reservation of the receive line when using the RS 422 (X.27) interface module Conversion of the MODBUS addresses to S7 data areas

4

Siemens ST 70 2003

4/103


Ordering dataCP 341 communications processor with one RS 232 C (V.24) interface RS 232 connecting cable

Order No. 6ES7 341-1AH01-0AE0 CP 341 manual German English French Italian 5m 10 m 15 m 6ES7 902-1AB00-0AA0 6ES7 902-1AC00-0AA0 6ES7 902-1AD00-0AA0 6ES7 341-1BH01-0AE0 Single license, without software or documentation MODBUS Slave (RTU format) Single license 5m 10 m 50 m 6ES7 902-2AB00-0AA0 6ES7 902-2AC00-0AA0 6ES7 902-2AG00-0AA0 6ES7 341-1CH01-0AE0 Single license, witout software or documentation Data Highway (DF1 protocol) Single license Single license, without software or documentation Loadable drivers for CP 341 MODBUS Master (RTU format) Single license

Order No.

6ES7 341-1AH00-8AA0 6ES7 341-1AH00-8BA0 6ES7 341-1AH00-8CA0 6ES7 341-1AH00-8EA0

4

for linking to SIMATIC S7

6ES7 870-1AA01-0YA0 6ES7 870-1AA01-0YA1

CP 341 communications processor with one 20 mA (TTY) interface 20 mA (TTY) connecting cable for linking to SIMATIC S7

6ES7 870-1AB01-0YA0 6ES7 870-1AB01-0YA1

CP 341 communications processor with one RS 422/485 (X.27) interface RS 422/485 connecting cable for linking to SIMATIC S7 5m 10 m 50 m

6ES7 870-1AE00-0YA0 6ES7 870-1AE00-0YA1


4/104

Siemens ST 70 2003

SIMATIC S7-300CommunicationCP 343-2

Overview

The CP 343-2 is the AS-Interface master for PLC SIMATIC S7-300 and the distributed I/O device ET 200M. The new communications processor offers the following functions: Connection of up to 62 AS-Interface slaves and integrated analog value transmission (according to expanded AS-Interface Specification V2.1)

Supports all AS-Interface master functions according to expanded AS-Interface Specification V2.1 Display of operating status and operational readiness of the connected slaves through LEDs in the frontplate Display errors (incl. AS-Interface voltage errors, configuration errors) through LEDs in the frontplate Compact housing in the design of the SIMATIC S7-300

4

Technical specificationsAS-Interface specification Bus cycle time Interfaces Assignment of analog address space in PLC AS-Interface connection Supply voltage Current consumption Through backplane bus Through AS interface from the AS-Interface shaped cables typ. 200 mA at 5 V DC Max. 100 mA 16 byte I/O and P-bus S7-300 S7-300-front connector with terminal +5 V DC through backplane bus V 2.1 5 ms for 31 slaves 10 ms for 62 slaves Power loss Permissible ambient conditions Operating temperature Transport/storage temperature Relative humidity Design Module format Dimensions (W x H x D) in mm Weight Space required S7-300 design 40 x 125 x 120 Approx. 190 g 1 slot 0 C to +60 C -40 C to +70 C Max. 95% at +25 C 2W

Ordering dataCP 343-2 communications processor for connection of SIMATIC S7-300 and ET 200M to AS-Interface according to extended AS-Interface; without front connector Front connector 20-pin, with screw-type terminals 1 unit 100 units

Order No.t

Order No. CP 343-2 manual including software (FC) and examples German English French Spanish Italian Electronic manuals Communications systems, protocols, products; on CD-ROM, German/English 6GK7 343-2AH00-8AA0 6GK7 343-2AH00-8BA0 6GK7 343-2AH00-8CA0 6GK7 343-2AH00-8DA0 6GK7 343-2AH00-8EA0 6GK1 975-1AA00-3AA0

6GK7 343-2AH00-0XA0

6ES7 392-1AJ00-0AA0 6ES7 392-1AJ00-1AB0

Siemens ST 70 2003

4/105


Overview

PROFIBUS DP master or slave with electrical interface to connect the SIMATIC S7-300 and the SIMATIC C7 to PROFIBUS up to 12 Mbit/s (including 45.45 kbit/s) Direct connection to the optical PROFIBUS-Network through FOC interface for plastic and PCF FO cables.

4

Communication services: - PROFIBUS DP - PG/OP communication - S7 communication (Client, Server, Multiplexing) - S5-compatible communication (SEND/RECEIVE) Simple configuration and programming using PROFIBUS PG/OP communication between networks through S7 routing. Module changeover without PG

Technical specificationsData transmission rate Interfaces Connection to PROFIBUS Supply voltage Supply voltage Current consumption From backplane bus From 24 V DC Power loss Permissible ambient conditions Operating temperature Transport/storage temperature Relative humidity Design Module format Dimensions (W x H x D) in mm Weight Number of CPs per S7-300 Performance data S7 communication Number of usable connections S5-compatible interface (SEND/RECEIVE) Number of usable connections Useful data/connections Max. 16 Max. 240 byte (SEND and RECEIVE) Max. 16 Compact assembly 40 x 125 x 120 Approx. 300 g 4 0 C to +60 C -40 C to +70 C Max. 95% at +25C 150 mA 250 mA 6.75 W 9-pin Sub-D socket 4-pole terminal block 24 V DC 9.6 to 12 Mbit/s (exception: 3 and 6 Mbit/s) Multi-protocol operation Number of usable connections Size of DP diagnostics data per connected slave DP master function DP Master Number of DP slaves Total size of DP data ranges - DP input range - DP output range Size of DP data ranges per connected slave - DP input range - DP output range DP slave function DP slave Size of DP data ranges DP input range DP output range PG/OP communication Number of operable OP connections (acyclic services) 16 240 byte 240 byte DP-VO 244 byte 244 byte 2160 byte 2160 byte DP-VO 124 Max. 32 (without DP); max. 28 (with DP) Max. 240 byte

4/106

Siemens ST 70 2003


Ordering dataCP 342-5 communications processor for connection of SIMATIC S7-300 to PROFIBUS up to 12 Mbit/s; with electronic manual on CD-ROM NCM S7 configuration software for PROFIBUS NCM S7 manual for PROFIBUS Paper version, for V5.x (STEP 7 V5.x) German English French Spanish Italian Manual "Communication for SIMATIC S7-300/-400" German English French Spanish Italian

Order No. 6GK7 342-5DA02-0XE0 PROFIBUS bus connector IP 20 for connection to PPI, MPI, PROFIBUS Without PG interface With PG interface Delivered with STEP 7 V5 onwards PROFIBUS FastConnect bus connector RS 485 with 90 outgoing feeder cable; with insulation displacement system, max. transmission rate 12 Mbit/s Without PG interface 6GK7 080-5AA04-8AA0 6GK7 080-5AA04-8BA0 6GK7 080-5AA04-8CA0 6GK7 080-5AA04-8DA0 6GK7 080-5AA04-8EA0 With PG interface PROFIBUS 12M bus terminal Bus terminal for connection of PROFIBUS stations up to 12 Mbit/s; with connecting cable DM 370 dummy module

Order No.

6ES7 972-0BA12-0XA0 6ES7 972-0BB12-0XA0

4

6ES7 972-0BA50-0XA0 6ES7 972-0BB50-0XA0 6GK1 500-0AA10

6ES7 370-0AA01-0AA0

6ES7 398-8EA00-8AA0 6ES7 398-8EA00-8BA0 6ES7 398-8EA00-8CA0 6ES7 398-8EA00-8DA0 6ES7 398-8EA00-8EA0

Siemens ST 70 2003

4/107

SIMATIC S7-300CommunicationCP 342-5 FO

Overview

PROFIBUS-DP master or slave with optical interface for connecting the SIMATIC S7-300 and the SIMATIC C7 to PROFIBUS up to 12 Mbit/ s (including 45.45 kbit/s) Direct connection to the optical PROFIBUS network through integrated fiber-optic cable interface for plastic and PCF fiber optics

4

Communication services: - PROFIBUS-DP - PG/OP communication - S7 communication (client, server, multiplexing) - S5-compatible communication (SEND/RECEIVE)) Simple configuration and programming using PROFIBUS PG/OP communication between networks through S7 routing. Module changeover without PG.

Technical specificationsData transmission rates Interfaces Connection to PROFIBUS Supply voltage Supply voltage Current consumption From backplane bus From 24 V DC Power loss Maximum distance between 2 adjacent network stations Plastic FOC PCF FOC Perm. ambient conditions Operating temperature Transport/storage temperature Relative humidity Operating altitude Design Module format Dimensions (W x H x D) in mm Weight Performance data S7 communication No. of usable connections Max. 16 Compact assembly 40 x 125 x 120 Approx. 300 g 4 Multi-protocol operation No. of usable connections 32 (without DP); max. 28 (with DP) 0 C to +60 C -40 C to +70 C Max. 95% at +25C Max. 50 m Max. 300 m 150 mA 250 mA 6.75 W 2 x duplex socket 4-pin terminal block 24 V DC 9.6 kbit/s to 12 Mbit/s (exception: 3 and 6 Mbit/s) DP master function DP master Number of operational DP slaves Size of the DP data ranges in total - DP input range - DP output range Size of the DP data ranges per connected slave - DP input range - DP output range Size of the DP diagnostic data per connected slave DP slave function Size of DP data storage areas - DP input range - DP output range PG/OP communication Number of operable OP connections (acyclic services) S5-compatible interface (SEND/ RECEIVE) No. of usable connections Useful data/connections Max. 16 Max. 240 byte (send and receive) 16 240 byte 240 byte 244 byte 244 byte Max. 240 byte 2160 byte 2160 byte DP-V0 124

4/108

Siemens ST 70 2003

SIMATIC S7-300CommunicationCP 342-5 FO

Ordering dataCP 342-5 FO communications processor for optical connection of SIMATIC S7-300 to PROFIBUS up to 12 Mbit/s; with electronic manual on CD-ROM NCM S7 configuration software for PROFIBUS NCM S7 manual for PROFIBUS Paper version, for V5.x (STEP 7 V5.x) German English French Spanish Italian

Order No. 6GK7 342-5DF00-0XE0 Manual for PROFIBUS networks Paper version Network architecture, components (OLM (V3), OBT, ILM), configuration and assembly German Delivered with STEP 7 V5 onwards English PROFIBUS Plastic Fiber Optic, simplex plug/polishing kit 100 simplex plugs and 5 polishing sets for assembling PROFIBUS plastic fiber-optic cables for the optical PROFIBUS DP 6GK7 080-5AA04-8AA0 6GK7 080-5AA04-8BA0 6GK7 080-5AA04-8CA0 6GK7 080-5AA04-8DA0 6GK7 080-5AA04-8EA0 PROFIBUS Plastic Fiber Optic, stripping tool set Tools for removing the outer casing and core casing Plug adapter for installing plastic simplex plugs; 50 units

Order No.

6GK1 970-5CA20-0AA0 6GK1 970-5CA20-0AA1 6GK1 901-0FB00-0AA0

4

6GK1 905-6PA10

6ES7 195-1BE00-0XA0

Siemens ST 70 2003

4/109


Overview

Master connection of SIMATIC S7-300 and SIMATIC C7 to PROFIBUS to 12 Mbit/s (incl. 45.45 kbit/s) Communication services: - PG/OP communication - S7 communication - S5-compatible communication (SEND/RECEIVE) - PROFIBUS-FMS

Simple to configure and program using PROFIBUS Easily integrated into the S7-300 system PG/OP communication between networks due to S7 routing. Module changeover without PG.

4

Technical specificationsData transmission rate Interfaces Connection to PROFIBUS Supply voltage Supply voltage Current consumption From backplane bus From 24 V DC Power loss Perm. ambient conditions Operating temperature Transport/storage temperature Relative humidity Design Module format Dimensions (W x H x D) in mm Weight Number of CPs per S7-300 1) Depending on the CPU used Compact assembly 40 x 125 x 120 Approx. 300 g 4 0 C to +60 C -40 C to +70 C Max. 95% at +25C 150 mA 250 mA 6.75 W Performance data FMS function Number of usable connections Variable length for READ Variable length for WRITE and REPORT No. of configurable server variables No. of variables which can be loaded from partner Multi-protocol operation Number of operable connections Max. 48 max. 16 237 byte 233 byte 256 256 9-pin Sub-D socket 4-pin terminal block 24 V DC 9.6 to 12 Mbit/s S7 communication performance data Number of usable connections S5-compatible interface performance data (SEND/ RECEIVE) Number of usable connections Useful data/connection Max. 16 Max. 240 byte (SEND and RECEIVE) Max. 16 1)

Ordering dataCP 343-5 communications processor for connecting SIMATIC S7-300 to PROFIBUS NCM S7 configuration software for PROFIBUS NCM S7 manual for PROFIBUS

Order-No. 6GK7 343-5FA01-0XE0 Manual "Communication for SIMATIC S7-300/-400" PROFIBUS bus connector IP 20 Delivered with STEP 7 V5 onwards See CP 342-5 PROFIBUS FastConnect bus connector RS 485 PROFIBUS 12M bus terminal DM 370 dummy module

Order-No. See CP 342-5 See CP 342-5 See CP 342-5

See CP 342-5 See CP 342-5

4/110

Siemens ST 70 2003


Overview

Connection of SIMATIC S7-300 to Industrial Ethernet - 10/100 Mbit/s full/half duplex connection with autosensing for automatic switching - Universal connection options for ITP, RJ45 and AUI - Multiprotocol mode with ISO and TCP transport protocol - Adjustable Keep Alive function Communication services: - ISO and TCP/IP transport protocols - PG/OP communication - S7 communication (client, server, multiplexing) - S5-compatible communication

Multicast at UDP Remote programming and commissioning through the network Configuration of the CP 343-1 with the option package NCM S7 for Industrial Ethernet (integrated in STEP 7) With S7 routing, PG/OP communication can be used across the whole network.

4

Technical specificationsData transmission rate Interfaces Connection to Industrial Ethernet (10/100 Mbit/s) 10BaseT, 100BaseTX Supply voltage Supply voltage Current consumption From backplane bus From external 24 V DC 10 Mbit/s und 100 Mbit/s 15-pin Sub-D socket (automatic switching between AUI and industrial twisted pair) RJ45 4-pin terminal block +5 V DC (5%) and +24 V DC (5%) 70 mA Typ. 400 mA max. 580 mA (depending on the interface used) 8.3 W 0 C to +60 C -40 C to +70 C Max. 95% at +25 C Compact S7-300 module double width Design Dimensions (W x H x D) in mm Weight Configuration software Performance data S5-compatible communication (SEND/RECEIVE) Sum of all simultaneously operable ISO/TCP/UDP connections No. of useful data - ISO or TCP - UDP S7 communication Number of connections PG/OP communication Number of operable OP connections (acyclic services) Multi-protocol operation Sum of all simultaneously operable connections Max. 16 Max. 8 KB Max. 8 KB Max. 2 KB Max. 16 16 80 x 125 x 120 Approx. 600 g NCM S7 for Industrial Ethernet (supplied with STEP 7 V5.x)

Power loss Perm. ambient conditions Operating temperature Transport/storage temperature Relative humidity Design Module format

Max. 32

Ordering dataCP 343-1 communications processor for connecting SIMATIC S7-300 to Industrial Ethernet using ISO, TCP/IP and UDP NCM S7 configuration software for Industrial Ethernet NCM S7 manual for Industrial Ethernet Paper version, for V5.x (STEP 7 V5.0) German English French Spanish Italian

Order No. 6GK7 343-1EX11-0XE0 Manual "Communication for SIMATIC S7-300/-400" SIMATIC NET electronic manuals German, English; on CD-ROM Delivered with STEP 7 V5 onwards

Order No. See CP 342-5 6GK1 975-1AA00-3AA0

6GK7 080-1AA03-8AA0 6GK7 080-1AA03-8BA0 6GK7 080-1AA03-8CA0 6GK7 080-1AA03-8DA0 6GK7 080-1AA03-8EA0

Siemens ST 70 2003

4/111

SIMATIC S7-300CommunicationCP 343-1 IT

Overview

4

Connection of SIMATIC S7-300 to Industrial Ethernet - 10/100 Mbit/s full/half duplex connection with autosensing for automatic switching - Universal connection options for ITP, RJ45 and AUI - Multi-protocol operation for ISO, TCP/IP and UDP - Adjustable Keep Alive function Communication services: - ISO, TCP/IP and UDP transport protocol - PG/OP communication - S7 communication - S5-compatible communication - IT communication

Web function for accessing process data through Web browser E-mail function for sending electronic mail from the S7-300 FTP server and client function for communication with data Multicast at UDP PG/OP communication between networks through S7 routing. Remote programming and commissioning through the network

Technical specificationsData transmission rate Interfaces Connection to Industrial Ethernet (10/100 Mbit/s) 10BaseT, 100BaseTX Supply voltage Supply voltage Current consumption From backplane bus From external 24 V DC 10 Mbit/s or 100 Mbit/s 15-pin Sub-D socket (automatic switching betw. AUI and industrial and twisted pair) RJ45 4-pin terminal block +5 V DC (5%) and +24 V DC (5%) 70 mA Typ. 400 mA max. 580 mA (depending on the interface used) 8.3 W 0 C to +60 C 40 C to +70 C Max. 95% at +25 C Compact module S7-300 double width 80 x 125 x 120 Approx. 600 g Design Configuration software Performance data IT communications Number of connections to an e-mail server Memory capacity of the file system S5-compatible communication (SEND/RECEIVE) Sum of all simultaneously operable ISO/TCP/UDP connections Number of useful data - ISO or TCP - UDP S7 communication Number of connections 1) PG/OP communication Number of usable OP connections (acyclic utilities) Multi protocol operation Sum of all simultaneously operable connections Max. 1 10 MB NCM S7 for Industrial Ethernet (supplied with STEP 7 V5.x)

Max. 16

Power loss Perm. ambient conditions Operating temperature Transport/storage temperature Relative humidity Design Module format Dimensions (B x H x T) in mm Weight

Max. 8 KB Max. 2 KB Max. 16 Max. 16

Max. 32

1) Depends on the S7 CPU being used

Ordering dataCP 343-1 IT communications processor for connecting SIMATIC S7-300 to Industrial Ethernet for S5-compatible communication, S7 communication, e-mail and www server, 10/100 Mbit/s, with electronic manual on CD-ROM

Order No. 6GK7 343-1GX11-0XE0 NCM S7 configuration software for Industrial Ethernet NCM S7 manual for Industrial Ethernet

Order No. Delivered with STEP 7 V5 upwards See CP 343-1

4/112

Siemens ST 70 2003

SIMATIC S7-300CommunicationCP 343-1 PN

Overview

The CP 343-1 PN enables connection of SIMATIC S7-300 to Industrial Ethernet - 10/100 Mbit/s full/half duplex connection with autosensing for automatic switching - Universal connection options for ITP, RJ45 and AUI - Adjustable Keep Alive function - TCP/UDP transport protocol PROFInet communications standards. PROFInet defines an engineering model or distributed automation solutions and a model for system-wide communication through PROFIBUS and Industrial Ethernet with IT standards

Additional communications services: - PG/OP communication - S7 communication - S5 compatible communication Multicast at UDP Remote programming and commissioning through the network Or S5-compatible communication

4

Technical specificationsData transmission rate Interfaces Connection to Industrial Ethernet AUI/industrial twisted pair Twisted pair (10Base/100BaseT) Connection for power supply Supply voltage Current consumption From backplane bus From external 24 V DC 10 Mbit/s and 100 Mbit/s autosensing 15-pin Sub-D socket with slide catch (automatic switchover between AUI and twisted pair) RJ45 socket 4-pin terminal block +5 V DC (5%) and +24 V DC (5%) 70 mA Typ. 400 mA max. 580 mA (depends on the interface being used) 10 W 0 C to +60 C -40 C to +70 C Max. 95% at +25 C Design Dimensions (W x H x D) in mm Weight Degree of protection Configuration Configuration software for PROFInet Configuration software for additional services Performance data PROFInet Communication Number of communication partners S5 compatible communication (SEND/RECEIVE) Sum of all simultaneously operable TCP/UDP connections Number of useful data, - TCP - UDP S7 and PG/OP communication Number of connections1) Multi-protocol operation Sum of all simultaneously operable connections Max. 64 80 x 125 x 120 Approx. 600 g IP 20 Option package SIMATIC iMap NCM S7 for Industrial Ethernet (supplied with STEP 7 v.5.x)

Power loss, approx. Perm. ambient conditions Operating temperature Transport/storage temperature Relative humidity Design Module format

Max. 16

Max. 8 KB Max. 2 KB Max. 16 Max. 32

Compact module S7-300, double width

1) Depends on the S7 CPU being used

Ordering dataCP 343-1 PN communications processor for connecting SIMATIC S7-300 to Industrial Ethernet with PROFInet function, TCP/IP, S7 communication, FETCH/WRITE, SEND/ RECEIVE, with/without RFC 1006, 10/100 Mbit/s, with electronic manual on CD-ROM

Order No. 6GK7 343-1HX00-0XE0 NCM S7 configuration software for Industrial Ethernet NCM S7 manual for Industrial Ethernet SIMATIC iMap V1.1 Linking editor for configuring of communication with Component based Automation Single license Software update service

Order No. Delivered with STEP 7 V5 onwards See CP 343-1

6ES7 820-0CC01-0YX0 6ES7 820-0CC01-0YX0

Siemens ST 70 2003

4/113

SIMATIC S7-300Connection methodsFront connector

Overview

For simple and user-friendly connection of sensors and actuators For retaining the wiring when replacing modules

4

With coding to avoid mistakes when replacing modules

Ordering dataFront connector 20-pin, with screw-type terminals 1 unit 100 units 20-pin, with spring-loaded terminals; 1 unit

Order No. Front connector 40-pin, with screw-type terminals 6ES7 392-1AJ00-0AA0 6ES7 392-1AJ00-1AB0 6ES7 392-1BJ00-0AA0 1 unit 100 units 40-pin, with spring-loaded terminals; 1 unit

Order No.

6ES7 392-1AM00-0AA0 6ES7 392-1AM00-1AB0 6ES7 392-1BM01-0AA0

SIMATIC TOP connect; fully modular connection

Overview

The standard connection for SIMATIC S7-300 For fast and error-free connection of sensors and actuators for distances of up to 3 m For clear and understandable wiring in the switching cabinet Comprising front connector module, connecting cable and terminal block All components are easy to plug in and can be replaced individually

For further information: Internet: http://www.siemens.de/ simatic_tc Catalog KT 10.2

Technical specificationsFront connector module Rated operating voltage Max. permissible operating voltage Max. permissible continuous current Per connector pin Max. permissible continuous current Permissible ambient temperature Test voltage Clearances and creepage distances 24 V DC 60 V DC 1A 4 A/byte 0 to + 60 C 0.5 kV, 50 Hz, 60 s IEC 664 (1980), IEC 664 A (1981), to DIN VDE 0110 (01.89), overvoltage class II, pollution severity 2 Front connector module 16-core and 2 x 16-core twisted ribbon cable from SIMATIC S7 to terminal block Operating voltage Continuous current per signal conductor Max. total current Operating temperature Outer diameter in mm 16-core/ 2 x 16-core 60 V DC 1A 4 A/byte 0 to + 60 C Approx. 9.5/11.5

4/114

Siemens ST 70 2003

SIMATIC S7-300Connection methodsSIMATIC TOP connect; fully modular connection

Technical specifications (continued)Terminal blocks for single-wire connection and 3-wire sensors Operating voltage, max. Continuous current per signal Total current, max. (supply) Operating temperature Installation orientation Clearances and creepage distances 60 V DC 1A 4 A/byte 0 to + 60 C Any IEC Report 664, IEC 664 A, IEC 1131 T2, CSA C22.2 No 142 UL 508, VDE 0160 (12.90), overvoltage class II, pollution severity 3 Approx. 51 x 41 x 55 Approx. 60 x 41 x 70 Connection blocks can be released for permanent wiring For 24 V infeed for supplying the digital modules For relay outputs Dimensions (W x H x D) in mm Operating voltage, max. Continuous current per signal line 24 V DC No 8 (NO contacts) Single contact, 1 NO Max. 2 A/250 V AC, max. 2 A/ 30 V DC, max. 0,2 A/60 V DC Recommended minimum load 100 mA 6 cycles/minute 10 x make-break operations 600 x 103 make-break operations at 230 V AC/2 A/ cos = 1 0 to +60 C Horizontal, vents running vertically. A space of at least 30 mm must be maintained above and below the relay terminal block for heat dissipation 106 Operating temperature Installation orientation Clearances and creepage distances Terminal blocks with 8S relays (continued) Clearances and creepage distances IEC 1131-2 (1992), EN 50 178 (4/98) overvoltage class III pollution severity 2 Between control circuit and relay contacts: 5.5 mm Between contact groups K0-K3 and K4-K7: 5.5 mm within a contact group: 3.2 mm UL and CSA pending

4

4-pin connection block

Dimensions (W x H x D in mm) 1-wire connection 6ES7924-0AA00-_A_0 For 3-wire sensors 6ES7924-0CA00-_A_0 Terminal blocks with 8S relays Excitation side Inductor operating voltage Connected to input Contact side Number of relay outputs Contact design Switching capacity (resistive load)

Two 8-pin connection blocks Approx. 60 x 68 x 78 60 V DC 2A 0 to + 60 C Any IEC Report 664, IEC 664 A, IEC 1131 T2, CSA C22.2 No 142 UL 508, VDE 0160 (12.90), overvoltage class II, pollution severity 3 Approx. 60 x 41 x 70 60 V DC 1A 0 to + 60 C Any IEC Report 664, IEC 664 A, IEC 1131 T2, CSA C22.2 No 142 UL 508, VDE 0160 (12.90), overvoltage class II, pollution severity 3 Approx. 60 x 41 x 70

Terminal blocks for 2 A module for SIMATIC S7

Dimensions (W x H x D in mm) Operating voltage, max. Continuous current per signal line Operating temperature Installation orientation Clearances and creepage distances

Switching frequency Service life Mechanical Electrical Operating temperature Installation position

Terminal blocks for SIMATIC S7 analog modules

s300

Documents

Transcript of s300