Indoor Bike

Owner’s Manual

For safe use and product knowledge, please completely read this Product OWNERS MANUAL.

S1/S2 Sport Series

v. 1.2

ext. 4

S1/S2

Welcome to LifeSpan

3

1/

Web site: www.LifeSpanFitness.com

r

Welcome to Lifespan

Limited Home Use Warranty

Important Safety Precautions

S1 Contents

S1 Assembly Instructions

S1 Assembly Instructions Continued

S2 Contents

S2 Assembly Instructions

S2 Assembly Instructions Continued

S1/S2 Adjustments

S1 Exploded View

S2 Exploded View

Extended Warranty

Serial Number Information

3

5

6

7

8

9

10

11

12

13

14

15

16

19

20

Table of Contents

4

1/

S148” Max. Length47” Max. Height18” Wide

84 lbs.

31 lbs.

Seat HeightHandlebar HeightSeat Fore/Aft

Alloy with sealed bearings

PVC Dipped

Micro Adjustment knob with felt pad friction control

Standard Mount Seat

Water Bottle HolderFront Mounted Transport Wheels4 Adjustable Foot Pads for Leveling

300 lbs

S248” Max. Length45” Max. Height21.5” Wide

97 lbs.

40 lbs.

Seat HeightHandlebar HeightSeat Fore/Aft

Alloy with sealed bearings

PVC Dipped

Micro Adjustment knob with felt pad friction control

Standard Mount Two Tone Bike Seat

Water Bottle HolderFront Mounted Transport Wheels4 Adjustable Foot Pads for Leveling

300 lbs. Max. User Weight:

Specifications

6

The LifeSpan Sport S1/S2 Indoor Bike(s) come with the following limited warranty, which applies only to the use of the Indoor Bike in the home, for residential, non-commercial purposes:

Frame:Parts:Labor:Wear Items:

S15 years90 days90 days90 days

S25 years1 year1 year90 days (friction pad, seat and pedals)

Labor warranty does not cover replacement of customer assembled parts.

Limited Home Use Warranty

S1/S2

(see details above)

the registration is

bike

7

Important Safety Precautions1/

Keep children off your indoor bike at all times.

.

Plastic 2

#19

1

3

4

5

7

6

2

8

10

11

121314

1414

15

18

19

1918

9

#6

#21

#18 Screw x 4

#9

#8

#20#2 Seat Bracket

#10

#12#16

S1 Contents

16

1819

1819

1919

18

18

9

8

19

18 18

10 12

a) Remove plastic block attached to frame for protection during shipping.

b) Remove bolts (18) and washers (19) from the rear base.

c) Stand the main frame assembly upright with the rear base (9) positioned underneath the frame.

d) Insert two bolts (18) with washers (19) down through the holes in the frame and into the rear base.

e) Once both bolts are started, securely tighten rear base (9) to frame.

a) Remove plastic block attached to frame for protection during shipping. b) Remove bolts (18) and washers (19) from the front base.

c) Position the front base underneath the frame.

d) Insert the two bolts (18) with washers (19) down through the holes in the frame and into the front base (8).

d) Once both bolts are started, securely tighten the front base (8) to the frame.

12 10on the bolt of

the

1/

Tighten both pedals with the multifuntion wrench (20).

S1 Assembly Instructions

Frontof Bike

10

6

7

Turn knob clockwise to tighten

3

4

2 a) Loosen the knob (5) on the front of the frame and slide the seat bracket (2) into the frame. (follow the round adjustment knob instructions above)

b) Loosen the knob (4) on the botton of the seat bracket (2) and slide the seat post (3) into the seat bracket. (follow the round adjustment knob instructions above)

5

Insert handlebar post (6) into the frame, with holesfacing out toward knob. Adjust height and tighten knob (7).(follow round adjustment knob instructions above)

Round Adjustment Knob Instructions

S1 Assembly Instructions Contiuned

7

S2 Contents

15

15

1/

5555

5656

52

57 57

12

Place a washer (55) and cap nut (56) over each bolt and with the multifunction wrench secure the rear basein place.

Place a washer (55) and cap nut (56) over each bolt andwith the multifuntion wrench secure the front basein place.

Tighten both pedals with the multifuntion wrench.

Identify which pedal goes on the right side and which pedal goes on the left side by locating the “R” on the bolt of the right pedal (62R) and the “L” on the bolt of the left pedal (62L).

U

S2 Assembly Instructions

Frontof Bike

1/

Turn knob clockwise to tighten

Insert handlebar post (16) into the frame with holes facing out toward knob. Adjust height and tighten knob (15). (follow round adjustment knob instuctions above)

Round Adjustment Knob Instructions

63

a) Loosen the knob (15) on the botton of the seat bracket (17). (follow round adjustment knob instructions above)

b) Slide seat post (63) into the seat bracket (17) from the front of the bracket as illustrated. (follow round adjustment knob instructions above)

S2 Assembly Instructions Contiuned

13

S1/S2 Adjustments

Adjust the foot down until it touches the floor. Repeat if necessary until the bike is completely stable.

Where to Place your Indoor BikePlace

The straps should be tight enough to keep the ball of your foot on the pedals throughout the completepedal rotation. Before your workout, test each strap and adjust if required. To tighten the strap simplypull down on the loose end of the strap until the strap is properly tensioned. To loosen the strap, pressdown on the top of the clip and pull the strap up.

14

S1 Exploded View

15

0614

05

0301

021213

01

05

041406

09

0811

07

0710

15

09 0108

09

01

02

02

03 04

05070603

04

0607

05

0305

06

0403

01

02

0204

08

03

02

01

06

02

01

07

02

04

07

07

01

04

06

0304

05 12

13

01

15

02

04

01

0402

0506

0309

0708

02

0706

05

02

04

01

03

0506

07 11

14

1115 16 10

1312

16

14

1709

08

07

05 04 02

010306

1918

09

S2 Exploded View

16

3235

36

34

3335

36 3725

29

2803

30

3126

2724 23

50

49

47

62

4346

4842

3940

4144

3940 41

54

58

62

5852

54

57

54

58

53

54

59

6061

6031

595731

6361

6058

5655

14

64 65

15

15

56

55

15

19

17

18

6321

22

16

2013

05

03

07 0408

0102

08 0407

0305

06

06

101

112

38

09

5245

6968

70

1/

MADE IN TAIWAN

TREADMILL MODEL NUMBER - S1/S2

SERIAL NUMBER :