S Sea RWS - Eraf

2
www.eraf.com The remotely operated stabilised weapon platform consists of an externally mounted gun, controlled from inside the bridge or ops room, using a hand controller and video display. A number of standard weapons, including 12,7mm or 7,62mm machine guns or 40mm grenade launchers, may be fitted to the Sea RWS platform. SEA RWS Remotely Operated Gun & Observation System FEATURES Accuracy due to gyro stabilisation compensating for platform motion Optical Auto Tracking for automatic target following Comprehensive coverage close to the vessel due to -40º depression angle Fire Control Software for accuracy while firing on the move at moving targets Sea RWS is ideally suited to naval applications such as: Stabilised primary weapon on an intercept boat Countermeasure against asymmetric threats on larger vessels Improved crew safety since the operator is not exposed Improved target recognition and accuracy due to high quality electro optical sight and powerful magnification Recording capability of sight images for debriefing exercises or legal investigations Sea RWS simplistic design gave rise to its inherent reliability, low maintenance cost and ease of operation.

Transcript of S Sea RWS - Eraf

Page 1: S Sea RWS - Eraf

www.eraf.com

The remotely operated stabilised weapon platform consists of an externally mounted gun, controlled from inside the bridge or ops room, using a hand controller and video display. A number of standard weapons, including 12,7mm or 7,62mm machine guns or 40mm grenade launchers, may be fitted to the Sea RWS platform.

SEA RWSRemotely Operated

Gun & Observation System

FEATURES Accuracy due to gyro stabilisation compensating for

platform motion

Optical Auto Tracking for automatic target following

Comprehensive coverage close to the vessel due to -40º

depression angle

Fire Control Software for accuracy while firing on the

move at moving targets

Sea RWS is ideally suited to naval applications such as:

Stabilised primary weapon on an intercept boat

Countermeasure against asymmetric threats on larger vessels

Improved crew safety since the operator is not exposed

Improved target recognition and accuracy due to high

quality electro optical sight and powerful magnification

Recording capability of sight images for debriefing

exercises or legal investigations

Sea RWS simplistic design gave rise to its inherent

reliability, low maintenance cost and ease of operation.

Page 2: S Sea RWS - Eraf

Head Office: Bldg. No. 2, Abi Al Barkat, Malaz, P.O.Box 27021, Riyadh 11417, K.S.A. T: + 966 11 4763163 F: + 966 11 4760989E: [email protected] | www.eraf.com

SEA RWSRemotely Operated Gun & Observation System

Specifications are subject to change without notice. Consult manufacturer for latest specifications.All manufacturing rights reserved.

ARMAMENT OPTIONS (interchangeable if required) 7,62mm General Purpose Machine Gun (GPMG) 12,7mm Heavy Machine Gun (HMG) 40mm Automatic Grenade Launcher (AGL) (optional).

AMMUNITION QUANTITY 7,62mm GPMG 300 rounds 12,7mm HMG 200 rounds 40mm AGL 32 rounds.

MAN MACHINE INTERFACE (Standard Configuration)

LCD Multi Function Display with software defined keys: Mode selection and display Burst length display “Armed” or “Safe” display Round count display Error messages Gun position indicator.

HAND CONTROLLER System on/off switch and indicator “Armed”/”Safe” switch and indicator Weapon cock switch Trigger Auto Tracking controls.

HEIGHT Trunnion: 1300mm Total: 1450mm

GUN CONTROL Angular coverage: Traverse n X 360º or ±150º Elevation -40º to +60º Customised programmed no-go and no-fire zones Slew rates: Traverse and Elevation up to 1,2 rad/sec (≈70º/sec) Low speed: Traverse and Elevation < 0,5 mrad/sec (≈1/40º/sec) Gun stabilisation as standard feature Manual operation in case of power or system failure.

OBSERVATION & SIGHTING Standard Configuration: Two FOV CCD day sight Cooled or uncooled thermal imaging camera Optional Laser Range Finder Optical Auto Tracking.

MASS (excluding weapon, sighting & ammunition) External mount: 120kg Display and hand controller: 10kg.

POWER REQUIREMENTS 24V DC (<20A) or 440V AC 50/60Hz 3-phase (500VA) or 220V AC 50/60 Hz single phase (500 VA).