Ryobi UK Powertools 2015 Catalogue
-
Upload
ryobi-tools -
Category
Documents
-
view
237 -
download
7
description
Transcript of Ryobi UK Powertools 2015 Catalogue
2015
Power Tools
PT 2014_UK-version 5.8.indd 1 05.08.14 16:25
PT 2014_UK-version 5.8.indd 2 05.08.14 16:25
At Ryobi® we’ve built a solid and enviable reputation by developing a real knowledge of exactly what people need from their power tools.
CONTENTS / KEY | 3
*Excluding spares and accessories.
We continue to offer a 2 year warranty on all our products, including the new products that we have introduced for 2014/2015*
All products shown are in compliance with the appropriate European regulations.
Warning: All warranties are country/region specific. Tools purchased e.g. in the USA or via the internet, and imported into Europe, which are not CE approved, not only violate EU legislation, but will not be supported/serviced in Europe by Ryobi® as a result. Only tools bought in the European Union (incl. Switzerland) are covered by an European warranty.
Ryobi® reserves the right to revise product specifications at any time without notice.
KEY
Keyless chuck
Variable speed control
Forward/reverseoperation
Electronic brake
Hammer action
Orbital stroke action
Spindle lock
Dust extraction
Electronic ’Soft Start’
Safety clutch
Tool bag
Carry case
Wet vac
Dry vac
Blower function
Laser light
2 gears
Soft Grip
Magnet
Auxiliary handle
Music / MP3
Spray
SDS
Quick blade / bit change
LED
Wet blade
Low noise
Anti-vibration
Hedge trimmer cutting capacity
Hedge trimmer diamond ground
Tool-less pruner
Air volume
Auto Feed
Charging time
Cutting path diameter
Cutting line diameter
Chainsaw bar length
Telescoping shaft
Tool-less shear
Blade length shear
Blade length hedge trimmer
Blade length pruner
XXcmXXcm
XXcm
XXcm XXcm
XXcm XXcm
Blade width shearXXcm XXcm
XXcm XXcm
XX
XXcm
XXm3/minXXcm
Torque setting 3 positions
New from Ryobi® 4 – 5 / 1418V ONE+™ Battery Technology 6 – 7ONE+™ 18V Cordless Power Tools 8 – 19ONE+™ 18V Cordless Lawn & Garden Tools 20 – 2512V Tools 26 – 274V Tools 28 – 29Batteries & Chargers 30 – 31Corded Drills 33 – 34Corded Angle Grinders 34 – 35Corded Saws 35 – 36Corded Woodworking Tools 37 – 40Heat Gun 40Mitre Saws / Table Saw 40 – 41Work Benches 42Accessory Sets & Accessories 43 – 48
CONTENTS
Weight with battery pack stated are based on the RB18L13 1.3Ah battery pack
PT 2014_UK-version 5.8.indd 3 05.08.14 16:25
4 | NEW FROM RYOBI®
STRAIGHTFIN
LINEASSIST
STRAIGHTFIN• Aids straight line cutting by up to 65%*• Retractable design for convenient storage
* RJS1050 model only
LINEASSIST• Flip down cut guide provides better
line-up with marked line • Splinter shield minimises
splintering during cutting
FLUSHCUT• Increased visibility of cut• Cut flush to front of tool• Aid straight line cutting
PROSTROKE• 23mm Stroke Length deliver
market leading cutting performance• 49% improvement on cutting accuracy*• 30% Reduced vibration*• 4 stage pendulum• Powerful 680W Motor 500-3,100spm• Depth of Cut: Wood 105mm Steel 12mm
Accuracy & Performance
The new range of Ryobi® jigsaws offers class leading cutting performance, accuracy and ease of use...
PROSTROKE
49% IMPROVEMENT ON CUTTING ACCURACY
New from Ryobi®
The Next Generation: Ryobi® Jigsaws
*vs previous Ryobi models
RETRACTABLE FIN IMPROVES STRAIGHT LINE CUTTING BY UP TO
65%*
PT 2014_UK-version 5.8.indd 4 05.08.14 16:25
NEW FROM RYOBI® | 5
Cut Line VisibilityMAXVIEW
• 46% Improvement to viewing angle and wider visible angle of blade
• Better control of cut
AIRFORWARD• Improved air management allows bevel
cutting without dust blown up into face/eyes• Re-directs the exhaust air to clear
the dust away from cutting area• Provides better line of sight
Comfort & Control• Ergonomic Handle• Up to 30% Smaller*• Micro texture overmould• Detachable Vacuum Port
SPEEDCONTROL• Variable speed control dial (RJS850-k
and RJS1050-K only)
• Easy to reach;• Optimised for both left & right-handed users
SURELOCK• Single finger blade-clamp operation• Sure-lock Indicator (RJS850-k
and RJS1050-K only)
• Quick & Secured
EASYBEVEL • Tool-less base bevel adjustment (RJS1050-K only)
• Larger lever actuation for secured locking• Easy access for Quick Bevel Adjustment
SURELOCK
UP TO 30% SMALLER
Also available...Ryobi's new DC jigsaw, the
R18JS-0 with cordless convenience and corded performance.
New from Ryobi®
The Next Generation: Ryobi® Jigsaws
*vs previous Ryobi models
46% IMPROVEMENT TO VIEWING ANGLE*
PT 2014_UK-version 5.8.indd 5 05.08.14 16:25
Fuel Guage
6 | 18V ONE+™ BATTERY TECHNOLOGY
LongerRun Time
Power Management
Improved Performance
ImprovedDurability
Longer Run TimeThe Ryobi® 4.0Ah battery is a first in the consumer
market and offers up to 95% longer run-times
versus our previous technology [BPL1820].
Power ManagementThe Ryobi® fuel guage is the simplest way for
the user to manage their workload.
Improved DurabilityTough pack design with built in impact
protection for long term durability.
Improved PerformanceRyobi IntelliCell technology monitors and balances individual cells to maximise run-times, storage life and safety, whilst improving tool performance by up to 10%.
Intelligent Battery Technology
PT 2014_UK-version 5.8.indd 6 05.08.14 16:26
30013511560
18V ONE+™ BATTERY TECHNOLOGY | 7
ON BOARD
FUEL GAUGE MONITORS BATTERY LIFE
Ryobi® is the only consumer brand offering a 4.0Ah battery pack, which gives the user un-paralleled run time.
PowerManagement
UP TO
10%MORE
ImprovedPerformance
UP TO
50%MORE
ImprovedDurability
UP TO
95%MORE
LongerRun time
ImprovedPerformance
1.2Ah
1.5Ah
Competitor A
Competitor B
1.5Ah
Competitor Battery
WastedBattery
Capacity
Number of holes drilled on one battery charge
Drilling 16mm holes into 47mm thick timber*
Ryobi’s IntelliCell™ technology monitors and balances individual cells taking away the need for wasteful buffers. This technology ensures every cell is fully charged to maximise run times, storage life and safety, while providing up to 10% more usable power.
Run timeput to the test
* Results dependent on tool, battery and application
PT 2014_UK-version 5.8.indd 7 05.08.14 16:26
ONE+™ 18V Tools 9 – 18ONE+™ 18V Cordless Lawn & Garden Tools 19 – 2412V Tools 26 – 274V Tools 28 – 29Battery & Charger Options 30 – 31
CORDLESS POWER TOOLS
PT 2014_UK-version 5.8.indd 8 05.08.14 16:26
With ONE+™
buying yourfirst tool isjust thebeginning…
Save...Buy any tool then expand your family for less. Buy additional tools without batteries and chargers, as a cost effective way to grow your collection.
Choose from over 35 garden & power toolsRyobi’s unique ONE+™ system consists of range of over 35 tools for both home and garden that can all be powered using one battery and charger. Buy the tools you want at the time you need them and avoid paying over the odds for excess batteries and chargers. With everything from drills to radios, trimmers to paint sprayers the choice is there for you to grow your family of tools in whatever direction you want.
StartChoose a kit…We offer a range of starter kits with different tools, batteriesand charger.
OrBattery and charger…Select a battery & charger and then the tool you want from the range as individual items.
18V ONE+™ SYSTEM | 9
PT 2014_UK-version 5.8.indd 9 05.08.14 16:26
2x BatteryBatterieBatterieBateríaBatterij
1x BatteryBatterieBatterieBateríaBatterij
0x BatteryBatterieBatterieBateríaBatterij
10 | ONE+™ 18V TOOLS
1 x double-ended screwdriver bit, depth stop, auxiliary handle
Included as standard
LLCDI18022
18V 2-Speed Hammer Drill/Driver
● Combination tool for hammer drilling and screwdriving applications● 13mm metal keyless chuck● Automatic spindle lock for one-handed bit change● Electronic variable speed, reverse and brake for total control
RCD18021L
18V 2-Speed Drill/Driver
● 13mm keyless chuck for greater accessory compatibility● Electronic variable speed, reverse and brake for total
control● Automatic spindle lock for one-handed bit change● 2 gears for most materials and applications● Quick adjustment 24 torque settings● Magnetic bit holder and LED light
LCDI1802M
18V 2-Speed Hammer Drill/Driver
● Combination tool for hammer drilling and screwdriving applications
● 13mm metal keyless chuck● Automatic spindle lock for one-handed bit
change● Electronic variable speed, reverse and brake for
total control
2 x 18V 1.3Ah Compact Lithium-Ion batteries, 1 hour super charger, 1 x double ended screwdriver bit, tool bag
1 x 18V 1.3Ah Compact Lithium-ion battery, 1 hour super charger,1 x double ended screwdriver bit, tool bag
Included as standard
Included as standard
Voltage (V) 18No. of batteries supplied ≠2Charger supplied 45 minMax. torque (Nm) 50Chuck capacity (mm) 13No load speed gear 1 (rpm) 0-400No load speed gear 2 (rpm) 0-1550Max. drilling wood (mm) 38Max. drilling steel (mm) 13Max. drilling masonry (mm) 13Torque settings 24Weight with battery pack (kg) 1.93Supplied in Tool bagArticle Number 5133001955EAN Code 4892210124609
Voltage (V) 18No. of batteries supplied 1Charger supplied 60 minMax. torque (Nm) 50Chuck capacity (mm) 13No load speed gear 1 (rpm) 0-440No load speed gear 2 (rpm) 0-1600Max. drilling wood (mm) 38Max. drilling steel (mm) 13Torque settings 24Weight with battery pack (kg) 1.6Supplied in Tool bagArticle Number 5133001954EAN Code 4892210124593
Voltage (V) 18No. of batteries supplied ≠0Max. torque (Nm) 54Chuck capacity (mm) 13No load speed gear 1 (rpm) 0-440No load speed gear 2 (rpm) 0-1600Max. drilling wood (mm) 38Max. drilling steel (mm)Max drilling masonry (mm)
1313
Torque settings 24Weight with battery pack (kg) 1.6Supplied in –Article Number 5133000246EAN Code 4892210110145
STARTERKIT
STARTERKIT
Also available withoutbattery as: RCD1802M 1x
BATTERY KIT
2x
BATTERY KIT
PT 2014_UK-version 5.8.indd 10 05.08.14 16:26
0x BatteryBatterieBatterieBateríaBatterij
0x BatteryBatterieBatterieBateríaBatterij
0x BatteryBatterieBatterieBateríaBatterij
ONE+™ 18V TOOLS | 11
CDC1802M
18V 2-Speed Drill/Driver
● 10mm keyless chuck● Electronic variable speed, reverse and brake for
total control● Spirit level for precise drilling● 2 gears for most materials and applications● Quick adjustment 24 torque settings● Magnetic screw and bit holder● GripZone™ overmould technology for improved
comfort with a positive grip
1 x double-ended screwdriver bit
Included as standard
Voltage (V) 18No. of batteries supplied ≠0Charger supplied –Max. torque (Nm) 42Chuck capacity (mm) 10No load speed gear 1 (rpm) 0-350No load speed gear 2 (rpm) 0-1300Max. drilling wood (mm) 32Max. drilling steel (mm) 10Torque settings 24Weight with battery pack (kg) 1.7Supplied in –Article Number 5133001057EAN Code 4892210106292
Included as standard
Voltage (V) 18No. of batteries supplied 0Charger supplied −Impact rate (ipm) 0-4000Blow energy (J) 1.5No load speed gear 1 (rpm) 0-1000Max. drilling wood (mm) 16Max. drilling steel (mm) 13Max. drilling masonry (mm) 12Weight with battery pack (kg) 2.94Supplied in −Article Number 5133001058EAN Code 4892210108609
RAD1801M
18V Right Angle Drill
● 10mm keyless chuck● Variable speed, reverse and brake for total control● Automatic spindle lock for one-handed bit change● LED for illuminated work piece● Magnetic drill bit tray for easy storage and access to drill bits
1 x double-ended screwdriver bit
Included as standard
Voltage (V) 18No. of batteries supplied 0Charger supplied −Chuck capacity (mm) 10No load speed gear 1 (rpm) 0-1100Max. drilling wood (mm) 38Max. drilling steel (mm) 10Weight with battery pack (kg) 1.83Supplied in −Article Number 5133001167EAN Code 4892210118585
CRH1801M
18V SDS+ Hammer Drill
● Pneumatic hammer mechanism delivers 1.5J of impact energy ideal for drilling holes in stone and concrete
● SDS+ chuck for fast drilling and easy accessory bit changes
● Powerful 18V motor for maximum performance
● 2 modes for extra versatility (hammer drill, rotary drill)
● Non-hammer setting ideal for drilling holes in wood and metal
● Variable speed, forward and reverse for total control
360° Auxiliary Handle, Depth Stop
PT 2014_UK-version 5.8.indd 11 05.08.14 16:26
0x BatteryBatterieBatterieBateríaBatterij
0x BatteryBatterieBatterieBateríaBatterij
0x BatteryBatterieBatterieBateríaBatterij
12 | ONE+™ 18V TOOLS
RID1801M
18V Impact Driver
● Powerful 220Nm of torque● Keyless 6.35mm (1⁄4˝) hex drive● Impact mechanism designed to drive long screw and
lag bolts● 3 x LED lights for better visibility● Die-cast front gear housing for durability● Variable speed, reverse and brake for total control
1 x impact bit, 1 x 5⁄8 inch socket adpator
Included as standard
Voltage (V) 18No. of batteries supplied 0Charger supplied −Max. torque (Nm) 220No load speed (rpm) 0-3200Weight with battery pack (kg) 1.63Supplied in −Article Number 5133001169EAN Code 4892210118608
BIW180M
18V Impact Wrench
● Up to 265Nm Torque (Max) for heavy duty bolt/nut driving
● Variable trigger speed for ultimate control● Keyless ½˝ Drive● Impact mechanism designed to drive long screws
and lag bolts● LED light for working in dimly lit areas● GripZone™ overmould technology for improved
comfort with a positive grip
½˝ to ¼˝ adaptor
Included as standard
Voltage (V) 18No. of batteries supplied 0Charger supplied −Max. torque (Nm) 265No load speed gear 1 (rpm) 0-3,000Impact rate (ipm) 0-3500Weight with battery pack (kg) 2.09Supplied in −Article Number 5133000214EAN Code 4892210108791
RMT1801M
18V Multi Tool
● A versatile multi purpose tool with both sanding and cutting heads● Quick change attachments for hassle free transition between sanding
and sawing ● LED for illuminated work piece● Variable speed for ultimate control across a
range of applications● Universal accessory adaptor makes the
product compatible with any brand of accessories
1 x flush cutting blade, 1 x wood/metal blade, 1 x sanding pad, 6 x sanding sheets, hex key, universal accessory adaptor
Included as standard
Voltage (V) 18No. of batteries supplied 0Charger supplied −Oscilation angle 3 DegreesOscilation rate (opm) 0-20,000Weight with battery pack (kg) 1.33Supplied in −Article Number 5133001633EAN Code 4892210120335
PT 2014_UK-version 5.8.indd 12 05.08.14 16:27
0x BatteryBatterieBatterieBateríaBatterij
0x BatteryBatterieBatterieBateríaBatterij
0x BatteryBatterieBatterieBateríaBatterij
ONE+™ 18V TOOLS | 13
RWSL1801M
18V Circular Saw
● Large 45mm cutting depth at 90°● Ultra thin TCT Kerf blade reduces power drain and
increases cutting performance● Ideal for laminate worktops, boards and sheet material● Bevel capacity up to 50°● Spindle lock for easy blade change● Laser guide for accurate cutting
Hex key, 150mm TCT circular saw blade and edge guide
Included as standard
Voltage (V) 18No. of batteries supplied 0Charger supplied −Blade diameter (mm) 150Bore size (mm) 10No load speed (rpm) 0-4,700Max. cutting depth 45˚ (mm) 32Max. cutting depth 90˚ (mm) 45Bevel capacity (°) 50Weight with battery pack (kg) 2.93Supplied in −Article Number 5133001165EAN Code 4892210118561
RRS1801M
18V Reciprocating Saw
● Universal saw for cutting a variety of materials● Tool-less blade clamp for quick and easy blade changes● Variable speed and brake● 22mm stroke length● Anti vibration technology● Adjustable shoe increases blade life
1 x metal blade, 1 x wood blade
Included as standard
Voltage (V) 18No. of batteries supplied 0Charger supplied −Stroke length (mm) 22No load speed (rpm) 0-3100Max. cutting capacity wood (mm) 180Weight with battery pack (kg) 2.33Supplied in −Article Number 5133001163EAN Code 4892210118707
R18JS-0
18V Jigsaw
● 25mm stroke length and up to 3,000 strokes per minute give excellent cutting performance
● 1 handed speed control for easy speed adjustment to suit different applications
● 4 stage pendulum action for enhanced cutting performance● Tool-less blade clamp for quick and easy blade change● Lock on switch reduces fatigue● LED worklight illuminates the cut line● Easy base adjustment for 0° to 45° bevel settings
1 x 10 TPI wood blade, 1 x 14 TPI scrolling blade
Included as standard
Voltage (V) 18No. of batteries supplied 0Charger supplied −Stroke length (mm) 25No load stroke rate (spm) 1,100 - 3,000Max. cutting capacity wood (mm) 101Weight with battery pack (kg) 2.53Supplied in −Article Number 5133002158EAN Code 4892210128010
NEW
Ideal with:
Ideal with:
Flush cut blade available: RAK05JSBFC
PT 2014_UK-version 5.8.indd 13 05.08.14 16:27
R18N16G-016G Finish nailerThe finishing nailer is your best all-around nailer for indoor trim and similar jobs. This is used for mouldings around windows and doors, baseboards, chair rails, furniture & cabinets.
Applications:• Fencing• Architraves• Baseboards/Heavy Skirting Boards• Light skirting• Door Sets • Staircases • Tile battens • Panelling Mouldings• Dado rails
R18N18G-018G Brad nailerThe brad nailer is lightweight and usually used for precision work and for smaller wood projects, upholstery. While the brads are small, and leave a fairly tiny hole to fill, they hold really well.
Applications:• Trellis• Architraves• Light skirting• Beading• Panelling• Dado rails
New from Ryobi®
Introducing Air StrikeAirstrike Technology provides cordless convenience, eliminating the need for a compressor and bulky air hose.
R18N18G-0
Power 18VNail length 16 – 51mmFiring Modes Bump & SequentialAngle or Straight straight
R18N16G-0
Power 18VNail length 19 – 65mmFiring Modes Bump & SequentialAngle or Straight straight
UP TO
60 NAILS PERMINUTE
14 | NEW FROM RYOBI®
PT 2014_UK-version 5.8.indd 14 05.08.14 16:27
0x BatteryBatterieBatterieBateríaBatterij
0x BatteryBatterieBatterieBateríaBatterij
0x BatteryBatterieBatterieBateríaBatterij
ONE+™ 18V TOOLS | 15
R18N18G-0
18V 18 Gauge Nailer● AirStrike™ Technology provides cordless convenience, eliminating the
need for a compressor and bulky air hose● Super compact cordless nail gun requires no compressor, air hoses,
gas cartridges or maintenance● 2 firing modes, sequential mode for precision and bump mode for rapid
fastening● Fires 18 Gauge (1.2mm head) nails from 16 to 51mm long● Maximum fire rate of up to 60 nails per minute● Fires up to 600 nail per charge with RB18L15 and 1600 with RB18L40
(based on 50mm nails into pine)● Grip-Light technology engages twin LED's by grasping the handle● Tool-less depth-of-drive adjustment helps protect work surface and
allows proper setting of nail heads
500 x 32mm nails, 2 x no mark shoes, reversible belt hook
Included as standard
Voltage (V) 18No. of batteries supplied 0Charger supplied −Magazine capacity brads 105Nail type (mm) 1.2Weight with battery pack (kg) 2.93Article Number 5133002093EAN Code 4892210128058
Voltage (V) 18No. of batteries supplied 0Charger supplied −Magazine capacity brads 100Nail type (mm) 1.6Weight with battery pack (kg) 3.2Article Number 5133002222EAN Code 4892210128898
R18AG-0
18V Angle Grinder
● 3 position handle for easy grinding or cutting● Tool-less wheel guard adjustment● Spindle lock for easy accessory changing● GripZone over-mould for positive control
Auxiliary handle, wrench,wheel guard, 1 x grinding disc
Included as standard
Voltage (V) 18No. of batteries supplied 0Charger supplied −Bore size (mm) 22No load speed (rpm) 7500Wheel size (mm) 115Weight with battery pack (kg) 2.58Supplied in −Article Number 5133001903-DSEAN Code 4892210123657
Ideal with:
NEW
NEWR18N16G-0
18V 16 Gauge Nailer● AirStrike™ Technology provides cordless convenience, eliminating the
need for a Nosy compressor, bulky air hose or expensive gas cartridges● Fires 16 Gauge (1.6mm) nails from 19 to 65mm long● 2 firing modes, full sequential mode for precision and contact
actuation mode for rapid fastening● Grip-Light technology engages LED by grasping the handle● Tool less depth of drive adjustment helps protect work surface and
allows proper setting of nail heads● Dry-fire lockout prevents the tool working without nails loaded● Tool-less jam release for easy removal of clear nails● Low nail indicator to quickly and easily see when it is time to re-load● Belt hook mounts left or right side for added convenience
Included as standard500 x 50mm nails, 2 x no mark shoes, reverseable belt hook
PT 2014_UK-version 5.8.indd 15 05.08.14 16:27
0x BatteryBatterieBatterieBateríaBatterij
0x BatteryBatterieBatterieBateríaBatterij
0x BatteryBatterieBatterieBateríaBatterij
16 | ONE+™ 18V TOOLS
EMS190DCL
18V Mitre Saw
● Aluminium base provides a good cutting surface
● Exactline laser guide for improved accuracy
● Gripzone over mould technology for an improved positive grip
● Pre-select mitre angles at 0, 15, 22.5, 30 and 40≠
● Up to 100 cuts in 100 x 25mm white pine (using fully charged 18V 4.0Ah battery)
1 x 24 TCT blade, 1 x clamp, dust bag, wrench
Included as standard
Voltage (V) 18No. of batteries supplied 0Charger supplied −Blade diameter (mm) 190Mitre capacity left (˚) 45Mitre capacity right (˚) 45Bevel capacity left (˚) 45Weight with battery pack (kg) 7.43Supplied in −Article Number 5133000932EAN Code 4892210116895
High pressure hose, high volume hose, 3 x air accessories
Included as standard
Voltage (V) 18No. of batteries supplied 0Charger supplied −
Hose length (m)High pressure hose 711mm,
High volume hose 756mm
Max. pressure (bar) 10.3bar, 150psiWeight with battery pack (kg) 1.71Supplied in −Article Number 5133001834EAN Code 4892210122780
LTS180M
18V Tile Saw
● Powerful 18V motor cuts through ceramic, granite, marble and masonry● Steel base includes oversized knobs for easy adjustments● 102mm (4˝) continuous rim diamond cutting wheel offers
precision cutting and prevents chipping● Spindle lock for easy cutting wheel changes● GripZone™ overmould technology for improved
grip and reduced vibration● Wrench storage● Diamond wheel included● Water bottle included
Hex key, water bottle
Included as standard
Voltage (V) 18No. of batteries supplied 0Charger supplied −No load speed (rpm) 4500Wheel size (mm) 102Arbor size (mm) 16Max. cutting depth 45˚ (mm) 16Max. cutting depth 90˚ (mm) 22Weight with battery pack (kg) 2.6Supplied in −Article Number 5133000417EAN Code 4892210110671
Ideal with:
R18I-0
18V Inflator
● Fast inflation of tyres and large inflatables● On board accessory storage● Quick deflation mode● Digital readout with auto shut off when
desired pressure is reached● Wrap around hose storage
PT 2014_UK-version 5.8.indd 16 05.08.14 16:27
0x BatteryBatterieBatterieBateríaBatterij
0x BatteryBatterieBatterieBateríaBatterij
0x BatteryBatterieBatterieBateríaBatterij
ONE+™ 18V TOOLS | 17
CRO180M
18V 125mm Random Orbit Sander
● Sanding pad size: 125mm (5") diameter● Lock on switch for continuous use● Quick-fix hook and loop sanding sheet attachment● Body grip design for increased comfort● GripZone™ overmould technology for improved comfort
with a positive grip
3 x sanding pads
Included as standard
Voltage (V) 18No. of batteries supplied 0Charger supplied −Oscilation rate (opm) 10000Sanding pad size (mm) 125 (5˝) diameterDiameter of orbit (mm) 2Weight with battery pack (kg) 1.71Supplied in −Article Number 5133000197EAN Code 4892210109163
CCC1801M
18V Corner Sander
● Sanding pad size: 140 x 100mm● Lock on switch for continuous use● Quick-fix hook and loop sanding sheet attachment● GripZone™ overmould technology for improved comfort
with a positive grip
Assortment of sanding papers
Included as standard
Voltage (V) 18No. of batteries supplied 0Charger supplied −No load speed (rpm) 11000Weight with battery pack (kg) 1.26Supplied in −Article Number 5133001045EAN Code 4892210109170
CPL180M
18V Planer
● Chamfering groove in die-cast front shoe for added precision
● Positive depth adjustment 0 - 0.4mm● Additional front handle for greater control● Side fence included for precision planing● DustTech™ Integrated dust technology
for maximum pick-up efficiency● GripZone™ overmould technology for
improved comfort with a positive grip
side fence, dust bag, wrench, 2 x reversible TCT blades
Included as standard
Voltage (V) 18No. of batteries supplied 0Charger supplied −Planing width (mm) 50Planing depth (mm) 0-0.4Rebate depth (mm) 13No load speed (rpm) 10,000Weight with battery pack (kg) 2.13Supplied in −Article Number 5133000195EAN Code 4892210109149
PT 2014_UK-version 5.8.indd 17 05.08.14 16:27
0x BatteryBatterieBatterieBateríaBatterij
0x BatteryBatterieBatterieBateríaBatterij
0x BatteryBatterieBatterieBateríaBatterij
CCG1801M
18V Caulking Gun
● 200+ tubes of latex per charged battery● Switch lock helps prevent accidental start-ups● Variable speed adjustment lever
for flow control● Easy release manual push
rod for quick reloading● Durable gears and carriage frame help ensure tool longevity● On-board puncture tool to brake tube seal if needed● GripZone™ overmould technology for improved comfort
with a positive grip
None
Included as standard
Voltage (V) 18No. of batteries supplied 0Charger supplied −No load speed high (mm/s) 6No load speed low (mm/s) 1Max. ouput force (kg) 225Weight with battery pack (kg) 2.13Supplied in −Article Number 5133000192EAN Code 4892210109200
CHV182M
18V Hand Vac
● Cleans up dry spills● Go-anywhere, fast cleaner● Quick-change replacement filter● Easy-clean dust cup● GripZone™ overmould technology for improved
comfort with a positive grip
Crevice and brush attachment
Included as standard
Voltage (V) 18No. of batteries supplied 0Charger supplied −Container capacity (ml) 173Weight with battery pack (kg) 1.39Supplied in −Article Number 5133001030EAN Code 4892210106322
CDR180M
18V MP3 Compatible Radio
● Auxiliary jack - compatible with MP3, CD players, etc● Convenient mode selector from FM to auxiliary input● On/off switch via volume control dial● 10 preset stations● Manual and automatic tuning● Fold out flexible antenna● Low battery indicator● 90mm speaker
2 x AAA batteries
Included as standard
Voltage (V) 18No. of batteries supplied 0Charger supplied −Speaker diameter (mm) 90Speaker output (W) 3Frequency (Hz) 87.5 - 108 FMWeight with battery pack (kg) 1.05Supplied in −Article Number 5133000614EAN Code 4892210114051
18 | ONE+™ 18V TOOLS
PT 2014_UK-version 5.8.indd 18 05.08.14 16:27
0x BatteryBatterieBatterieBateríaBatterij
0x BatteryBatterieBatterieBateríaBatterij
Pivoting
head
RFL180M
18V Flashlight
● Pivoting head for perfect illumination for all tasks● Flat base for added stability● Soft touch trigger for comfort● 4000 Lux for high illumination
Included as standardSpare bulb
Voltage (V) 18No. of batteries supplied 0Charger supplied −Bulb type HalogenWeight with battery pack (kg) 0.72Article Number 5133001637EAN Code 4892210120199
P620
18V Speed Sprayer
● The sprayer's flexible intake tube lets you spray at any angle and use the last remaining paint in the container minimizing wastage
● Innovative and patented delivery system also minimizes the need for dilution
● Choose between three spray patterns, horizontal, vertical or round, to provide you with the best coverage whilst minimizing overspray
● Quick lock container for easy set-up● Ideal for exterior walls, garage doors and
outbuildings● Suitable for use with any brand of paint● GripZone™ overmould technology for
improved comfort with a positive grip
Included as standardVertical tip, horizontal fan tip, viscosity & measuring cup, cleaning kit
Voltage (V) 18No. of batteries supplied 0Charger supplied −Container capacity (ml) 1000Paint coverage sprayer (m²/min) 10Flow rate (l/h) 20Weight with battery pack (kg) 2.36Supplied in −Article Number 5133000155EAN Code 4892210110589
ONE+™ 18V TOOLS | 19
PT 2014_UK-version 5.8.indd 19 05.08.14 16:27
50L
40cm
20mm-70mm 2hr
4.0Ah
x 2
RLM18X40H240
18V Lithium Fusion™ Lawnmower
● The performance of 36V as the Fusion creates 36V performance through two 18V batteries
● Aerodynamically optimised cutting deck with 40cm metal blade for excellent cutting and mulching performance
● Vertebrae™ handle design for extended fatigue-free use with drive-by-wire built-in controls
● Assembles in 5 minutes or less out of the box● Quick-release fold-down handle and collapsible grass catcher
which stores flat on top of mower● As part of the 18V ONE+™ system, the battery is compatible with over
35 tools for the home and garden
4.0Ah 18V battery and charger, 50 litre hard top grass bag, mulching plug
Included as standard
Voltage (V) 36Battery pack capacity (Ah) 4.0No. of batteries supplied 2Decksize (cm) 40Blade speed (rpm) 3550Charger supplied 2 hrDrive mechanism PushMulching capable YesWeight with battery pack (kg) 20Article Number 5133002099EAN Code 4892210820815
NEW
PT 2014_UK-version 5.8.indd 20 05.08.14 16:27
18mm50cm 18 Ah
1hr
25–30cm XXcm 1.6mm
RHT1851R15
18V Hedge Trimmer
● Excellent run time, ideal for gardens of up to 300 square metres in size● Powerful cutting performance due to the high-torque motor● Lightweight and perfectly balanced unit thanks to the battery's central
location in the tool● Rotating rear handle offers ease of use in multiple positions● Excellent cutting quality through precision diamond ground blade● Anti-jamming system prevents accidental blocking● HedgeSweep™ attachment offers easy removal of clippings● As part of the 18V ONE+™ system, the battery is compatible with over
35 tools for the home and garden
Voltage (V) 18Battery pack capacity (Ah) 1.5No. of batteries supplied 1Charger supplied 60 minMax. cutting capacity (mm) 18Blade speed (rpm) 2700Blade length (cm) 50Battery type Li-ionWeight with battery pack (kg) 3.15Article Number 5133002110EAN Code 4892210820754
Included as standard1.5Ah 18V battery and charger, auto feed spool, HedgeSweep™ attachment, blade sheath
NEW
NEW
Included as standardAuto feed spool
OLT1831S
18V Line Trimmer
● Powerful, easy cutting with 1.6mm cutting line and a 30cm cut capacity
● Vertebrae™ design for improved comfort during use● EasyEdge™ feature offers quick transition between edging and
trimming modes● Auto feed line advance for added convenience● This line trimmer is sold as a bare tool, allowing you to build on your
ONE+™ collection without spending additional money on batteries and chargers with each tool purchase
Voltage (V) 18Required battery capacity (Ah) 1.3No. of batteries supplied 0Charger supplied –Cutting path width (cm) 25-30Cutting line diameter (mm) 1.6Line feed system Auto feedWeight with battery pack (kg) 2.14Article Number 5133002162EAN Code 4892210821195
0x BatteryBatterieBatterieBateríaBatterij
ONE+™ 18V CORDLESS LAWN & GARDEN TOOLS | 21
PT 2014_UK-version 5.8.indd 21 05.08.14 16:28
PT 2014_UK-version 5.8.indd 22 05.08.14 16:28
25cm XXcm 1.6mm 18 Ah
3hr
25–30cm XXcm 1.6mm
45 min
1.3Ah 18V battery and charger, auto feed spool
Included as standard
Voltage (V) 18Battery pack capacity (Ah) 1.3No. of batteries supplied 1Charger supplied 3 hrLine feed system Auto feedCutting path width (cm) 25Cutting line diameter (mm) 1.6Weight with battery pack (kg) 1.65Article Number 5133001807EAN Code 4892210818430
RLT1825Li
18V Line Trimmer
● Two handle design for improved user comfort● EasyEdge for quick transition to edging mode● 25cm cutting path for efficient cutting rate● Auto-feed line advance for added convenience● As part of the 18V ONE+™ system, the battery is compatible
with over 35 tools for the home and garden
RLT1830H13
18V Hybrid Line Trimmer
● Innovative 18V Hybrid power, offers the choice of seamlessly changing between corded and cordless power in the same tool
● Powerful cutting with 1.6mm line and adjustable cutting width from 25-30cm for great versatility and run time optimisation
● Vertebrae™ design for improved comfort during use● EasyEdge™ feature allows the user to quickly transition
between edging and trimming modes● Auto feed line advance for added convenience● Battery charges in 45 minutes● As part of the 18V ONE+™ system, the battery is compatible
with over 35 tools for the home and garden
Voltage (V) 18Required battery capacity (Ah) 1.3No. of batteries supplied 1Charger supplied 45 minCutting path width (cm) 25-30Cutting speed (rpm) 9000-8000Line feed system Auto feedWeight with battery pack (kg) 2.8Article Number 5133002103EAN Code 4892210820792
1.3Ah 18V battery and charger, auto feed spool, 8m cable
Included as standard
NEW
ONE+™ 18V CORDLESS LAWN & GARDEN TOOLS | 23
PT 2014_UK-version 5.8.indd 23 05.08.14 16:28
22mm55cm
16mm50cm
24 | ONE+™ 18V CORDLESS LAWN & GARDEN TOOLS
NEWOHT1855R
18V Hedge Trimmer
● Powerful cutting performance due to the high-torque motor● Lightweight and perfectly balanced unit thanks to the battery's central
location in the tool● Rotating rear handle offers ease of use in multiple positions● Excellent cutting quality through precision laser cut, diamond ground blade● Anti-jamming system prevents accidental blocking● HedgeSweep™ attachment included offers easy removal of clippings● Auto feed line advance for added convenience● This hedge trimmer is sold as a bare tool, allowing you to build on your
ONE+™ collection without spending additional money on batteries and chargers with each tool purchase
Voltage (V) 18Required battery capacity (Ah) 1.3No. of batteries supplied 0Charger supplied −Max. cutting capacity (mm) 22Blade speed (rpm) 2700Blade length (cm) 55Battery type −Weight with battery pack (kg) 2.8Article Number 5133002161EAN Code 4892210821249
HedgeSweep™ attachment, blade sheath
Included as standard
4-positi
on articulating head
OHT1850X
18V Long Reach Hedge Cutter
● 4-position articulating head and rotating rear handle for optimum reach in all cutting applications
● Central trigger for easy use in extended reach position● HedgeSweep debris sweeper for easy removal of clippings● Auto feed line advance for added convenience● This long reach hedge cutter is sold as a bare tool, allowing you to build
on your ONE+™ collection without spending additional money on batteries and chargers with each tool purchase
Included as standardHedgeSweep™ blade sheath
Voltage (V) 18Required battery capacity (Ah) 1.3No. of batteries supplied ≠0Charger supplied –Max. cutting capacity (mm) 16Blade speed (rpm) 2400Blade length (cm) 50Weight with battery pack (kg) 3.73Article Number 5133001249EAN Code 4892210815439
0x BatteryBatterieBatterieBateríaBatterij
0x BatteryBatterieBatterieBateríaBatterij
PT 2014_UK-version 5.8.indd 24 05.08.14 16:29
20cm
193km/h
OPP1820
18V Pole Saw
● In-line motor for pruning in tight places● Extendable shaft for a reach of up to 4 meters● 30 degree angled cutting head for safer and easy cutting● Auto feed line advance for added convenience● This pole saw is sold as a bare tool, allowing you to build on your
ONE+™ collection without spending additional money on batteries and chargers with each tool purchase
Voltage (V) 18Required battery capacity (Ah) 1.3No. of batteries supplied ≠0Charger supplied –Chain bar length (cm) 20Chain speed (m/s) 5Weight with battery pack (kg) 4.1Article Number 5133001250EAN Code 4892210815446
Included as standardBar and chain oil, scabbard, strap
OBL1802
18V Blower
● Accepts 18V ONE+™ NiCad or Lithium-Ion batteries● Powerful but quiet blower / sweeper● 120mph (193km/h) airflow speed● Light weight for easy operation● Ergonomic flick switch● High speed nozzle design with debris scraper● GripZone™ overmould for comfortable grip● Auto feed line advance for added convenience● This blower is sold as a bare tool, allowing you to build on your
ONE+™ collection without spending additional money on batteries and chargers with each tool purchase
1 x nozzle
Included as standard
Voltage (V) 18Required battery capacity (Ah) 1.5AhNo. of batteries supplied 0Charger supplied −Airflow speed (l/min) 120mph (193km/h)Weight with battery pack (kg) 1.6Article Number 5133000731EAN Code 4892210812605
0x BatteryBatterieBatterieBateríaBatterij
0x BatteryBatterieBatterieBateríaBatterij
ONE+™ 18V CORDLESS LAWN & GARDEN TOOLS | 25
PT 2014_UK-version 5.8.indd 25 05.08.14 16:29
1x BatteryBatterieBatterieBateríaBatterij
RCD12011L
12V Drill Driver
● 10mm keyless chuck● 22 torque settings for perfect screwdriving every time● Light and compact - ideal for use throughout the house● LED to illuminate the work piece● Fuel gauge to indicate power levels
Included as standard1 x double ended bit, and charger
Voltage (V) 12No. of batteries supplied 1Charger supplied 60 minMax. torque (Nm) 25Chuck capacity (mm) 10No load speed gear 1 (rpm) 0-715Max. drilling wood (mm) 25Max. drilling steel (mm) 10Torque settings 22Weight with battery pack (kg) 1.08Supplied in Tool bagArticle Number 5133001157EAN Code 4892210118509
1x
BATTERY KIT
PT 2014_UK-version 5.8.indd 26 05.08.14 16:29
1x BatteryBatterieBatterieBateríaBatterij
1x BatteryBatterieBatterieBateríaBatterij
1x BatteryBatterieBatterieBateríaBatterij
12V TOOLS | 27
RMT12011L
12V Multi tool
● A versatile and compact mulit purpose tool with both sanding and cutting heads● Quick change attachments for hassle free transition between sanding and sawing● LED to illuminate the work piece● Fuel gauge to indicate power levels● Universal accessory adaptor makes
the product compatible with any brand of accessories
1 x flush cutting blade, 1 x wood/metal blade, 1 x sanding pad, 6 x sanding sheets, hex key, universal accessory adaptor, and charger
Voltage (V) 12No. of batteries supplied 1Charger supplied 60 minOscilation angle 3 DegreesOscilation rate (opm) 0-20,000Weight with battery pack (kg) 1.07Supplied in Tool bagArticle Number 5133001772EAN Code 4892210121431
1x
BATTERY KIT
R12PS-L13S
12V Palm Sander
● MicroFiltration Integrated dust technology system for maximum pick up efficiency
● Unique integrated finger to access hard to reach places● Triangular pad design for sanding up to the edge in tight corners● Light and compact design● fuel gauge to indicate power levels
Included as standard
Included as standard
6x finger sanding sheets, 3x delta sanding sheets, and charger
Voltage (V) 12No. of batteries supplied 1Charger supplied 60 minNo load speed (rpm) 20,000Diameter of orbit (mm) 1.2Sanding pad size (mm) 124 CM2Weight with battery pack (kg) 0.76Supplied in Tool bagArticle Number 5133002239EAN Code 4892210129215
1x
BATTERY KIT
RRS12011L
12V Multi Purpose Saw
● 2-in-1 saw with inter-changeable blade to enable the saw to be used in either reciprocating or jigsaw modes, making it ideal for a range of tasks
● Variable speed for optimum control in all applications● LED to illuminate the work piece● Fuel gauge to indicate power levels● Safety lock off switch to avoid
accidental starting
Included as standard1 x wood blade, 1 x metal blade, 1 x jigsaw blade, and charger
Voltage (V) 12No. of batteries supplied 1Charger supplied 60 minNo load speed (rpm) 0-3200Stroke length (mm) 13Max. cutting capacity wood (mm) 60Weight with battery pack (kg) 1.17Supplied in Tool bagArticle Number 5133001161EAN Code 4892210118523
1x
BATTERY KIT
PT 2014_UK-version 5.8.indd 27 05.08.14 16:29
PT 2014_UK-version 5.8.indd 28 05.08.14 16:29
CSD4130GN
4V Lithium-Ion Screwdriver
● 12 Torque settings● LED light for working in dimly lit areas● Overmould switch for added comfort● GripZone™ overmould technology for improved comfort with
a positive grip● Secure QuickChange™ chuck with automatic spindle lock for
one handed bit changing● One screwdriver included per product
Included as standardGripcase with 30 screwdriver bits, and charger
Voltage (V) 4No. of batteries supplied 1Charger supplied 10 hrMax. torque (Nm) 5Tool reception 1⁄4˝ HexTorque settings 12Weight with battery pack (kg) 0.47Supplied in KitboxArticle Number 5133001037EAN Code 4892210108234
4V TOOLS | 29
CSD4107BG
4V Lithium-Ion Screwdriver
● 12 Torque settings● LED light for working in dimly lit areas● Overmould switch for added comfort● GripZone™ overmould technology for improved comfort with a positive
grip● Secure QuickChange™ chuck with automatic spindle lock for one handed
bit changing
Included as standard6 piece bit set, and charger
Voltage (V) 4No. of batteries supplied 1Charger supplied 10 hrMax. torque (Nm) 5No load speed gear 1 (rpm) 180Tool reception 1⁄4˝ HexTorque settings 12Weight with battery pack (kg) 0.47Supplied in Tool bagArticle Number 5133000605-DSEAN Code 5034716008765
PT 2014_UK-version 5.8.indd 29 05.08.14 16:29
30 | BATTERY & CHARGER SUMMARY
BATTERY & CHARGER OPTIONS18V LITHIUM-ION COMPACT BATTERIES
18V LITHIUM-ION BATTERIES & CHARGER KITS
Specification
Description
System
Battery Chemistry
Nr. Code EAN Code
Specification
Description
System
Battery Chemistry
Nr. Code EAN Code
RB18L13
1 x 18V (1.3Ah) Lithium-ion Battery
5133001904 4892210124074
RB18L15
1 x 18V (1.5Ah) Lithium-ion Battery
5133001905 4892210124081
RB18L40
1 x 18V (4.0Ah) Lithium-ion Battery
5133001907 4892210124104
RBC18L13
1 x 18V (1.3Ah) Lithium-ion Battery & Super Charger
5133001909 4892210124166
RBC18LL13
2 x 18V (1.3Ah) Lithium-ion Battery & Super Charger
5133002065 4892210126870
RBC18L15
1 x 18V (1.5Ah) Lithium-ion Battery & Super Charger
51330019114892210124180
PT 2014_UK-version 5.8.indd 30 05.08.14 16:29
BATTERY & CHARGER SUMMARY | 31
CHARGERS
BCL14181H
Super Charger for both Lithium-ion & NiCad Batteries
51330011284892210117984
Specification
Description
System
Battery Chemistry
Nr. Code EAN Code
BCS618
6 Port Battery Main tenance System suitable for Lithium- ion & NiCad Batteries
51330010334892210106001
12V BATTERIES
Specification
Description
System
Battery Chemistry
Nr. Code EAN Code
BSPL1213
1 x 12V (1.3Ah) Battery
5133001732 4892210120687
PT 2014_UK-version 5.8.indd 31 05.08.14 16:30
CORDED POWER TOOLS
Percussion Drills & Rotary Hammer Drill 33 – 34Angle Grinders 34 – 35Saws 35 – 36Multi Tool 37Sanders, Planers, Router & Heat Gun 37 – 40Mitre Saws / Table Saw 40 – 41Work Benches 42
PT 2014_UK-version 5.8.indd 32 05.08.14 16:30
RPD1200-K
1200W Percussion Drill
● Variable speed forward & reverse for total control● Compact & lightweight for easy drilling● GripZone™ overmould for positive grip and
improved comfort● Metal gear housing● Metal chuck with auto-spindle lock● 2-Speed● LED
360° Auxiliary handle, depth stop
Included as standard
Power input (W) 1200Chuck capacity (mm) 13No load speed gear 1 (rpm) 0-1,200No load speed gear 2 (rpm) 0-3,200percussion rate gear 1 0-19,200percussion rate gear 2 0-51,200Max. drilling wood (mm) 25/50Max. drilling steel (mm) 8/16Max. drilling masonry (mm) 18/22Weight (kg) 3.15Supplied in KitboxArticle Number 5133002068EAN Code 4892210126771
RPD800-K
800W Percussion Drill
● Variable speed forward & reverse for total control● Compact & lightweight for easy drilling● Gripzone™ overmould for positive grip and
improved comfort● Single sleeve (auto spindle lock) chuck● LED
360° Auxiliary handle, depth stop
Included as standard
Power input (W) 800Chuck capacity (mm) 13No load speed gear 1 (rpm) 0-3,000Max. percussion rate (bpm) 0-51,000Max. drilling wood (mm) 34Max. drilling steel (mm) 13Max. drilling masonry (mm) 16Weight (kg) 1.8Supplied in KitboxArticle Number 5133002019EAN Code 4892210125903
NEW
NEW
NEW
RPD500-G
500W Percussion Drill
● The most compact percussion drill in its class - up to 30% lighter than competition
● Variable speed forward & reverse for total control
● GripZone™ overmould for positive grip and improved comfort
360° Auxiliary handle, depth stop
Included as standard
Power input (W) 500Chuck capacity (mm) 13No load speed gear 1 (rpm) 0-3,000percussion rate gear 1 0-50,000Max. drilling wood (mm) 25Max. drilling steel (mm) 13Max. drilling masonry (mm) 13Weight (kg) 1.6Supplied in −Article Number 5133002244EAN Code 4892210129284
PERCUSSION DRILLS | 33
PT 2014_UK-version 5.8.indd 33 05.08.14 16:30
180°
ERH710RS
710W SDS-Plus Rotary Hammer Drill
● Variable speed forward & reverse for total control● Rotation stop for light chiselling● Hammer stop for drilling into wood,
steel, ceramics and screwdriving applications
● Electronic variable speed, reverse and brake for total control
● Safety clutch to protect operator if bit jams
● Livetool Indicator™ glows blue when plugged into the power supply
360° Auxiliary handle, depth stop
Included as standard
Power input (W) 710Chuck type SDSNo load speed gear 1 (rpm) 0-1,100Max. percussion rate (bpm) 0-4,000Blow energy (J) 2Max. drilling wood (mm) 32Max. drilling steel (mm) 13Max. drilling masonry (mm) 24Weight (kg) 3Supplied in KitboxArticle Number 5133000527EAN Code 4892210111593
EAG2000RS
Large Angle Grinder
● Full length trigger switch with overmould● 180° multi-directional rotating back handle for
improved comfort and control● Tool-less wheel guard for quick and easy
adjustment● Two position Auxiliary Handle with
wrench storage● Spindle Lock for easy wheel
changing● Livetool Indicator™ glows blue
when plugged into the power supply
Wrench (x1), wheel guard (x1), auxiliary handle, grinding wheel (x1)
Included as standard
Power input (W) 2000Disc diameter (mm) 230Bore size (mm) 22Spindle size M14No load speed (rpm) 6,000Weight (kg) 6.0Supplied in KitboxArticle Number 5133000551EAN Code 4892210111814
NEW
EAG750RS
Small Angle Grinder
● Lock on switch for continued use● Tool-less wheel guard for quick and
easy adjustment● Two position Auxiliary Handle● Spindle Lock for easy wheel changing● Livetool Indicator™ glows blue
when plugged into the power supply
Grinding Wheel (x1), Wrench (x1), Wheel Guard, Auxiliary Handle
Included as standard
Power input (W) 750Disc diameter (mm) 115Bore size (mm) 22Spindle size M14No load speed (rpm) 11,000Weight (kg) 2.4Supplied in −Article Number 5133000543EAN Code 4892210111753
34 | ROTARY HAMMER DRILL & ANGLE GRINDERS
PT 2014_UK-version 5.8.indd 34 05.08.14 16:30
EAG600RS
Small Angle Grinder
● Lock on switch for continued use● Powerful 600W motor with a high torque
gear box● 2 position handle for left or right handed
operation● Spindle lock and adjustable guard for
easy wheel and accessory changing
Grinding wheel (x1), wrench (x1), wheel guard, auxiliary handle
Included as standard
Power input (W) 600Disc diameter (mm) 115Bore size (mm) 22Spindle size M14No load speed (rpm) 12,000Weight (kg) 2.0Supplied in −Article Number 5133001153EAN Code 4892210118424
RJS1050-K
680W Jigsaw
● Most visible cut line delivered by slim profile, LED and AIRFORWARDS to remove dust
● High accuracy achieved through PRO STROKE mechanism, 4-stage pendulum action and LINEASSIST
● SPEEDCONTROL thumb activated speed regulation● SURELOCK blade clamp with colour coding makes it
clear when the blade is fitted correctly● FLUSHCUT blade allows user to cut up to the guard● Retractable fin helps straight line accuracy
x1 wood blade, x1 flush cut blade, x1 dust port
Included as standard
Power input (W) 680Stroke length (mm) 23No load speed (rpm) 500-3,100Max. cutting capacity wood (mm) 105Max. cutting capacity steel (mm) 12Weight (kg) 2.2Supplied in KitboxArticle Number 5133002220EAN Code 4892210128362
NEW
NEWRJS750-G
500W Jigsaw
● Most visible cut line delivered by slim profile and AIRFORWARDS to remove dust
● High accuracy achieved through PRO STROKE mechanisms and LINEASSIST
● Quick Lock one finger blade clamp allows user to change blade easily
● Most compact and comfortable jigsaw wtih ergonomic handle and detachable vacuum port
1 x wood blade, 1 x hex key, x 1 dust port
Included as standard
Power input (W) 500Stroke length (mm) 19No load speed (rpm) 0-3,000Max. cutting capacity wood (mm) 75Max. cutting capacity steel (mm) 6Weight (kg) 1.8Supplied in −Article Number 5133002216EAN Code 4892210128300
ANGLE GRINDER & JIGSAWS | 35
Flush cut blade available: RAK05JSBFC
Flush cut blade available: RAK05JSBFC
PT 2014_UK-version 5.8.indd 35 05.08.14 16:30
ERS80VHG
Reciprocating Saw
● Variable speed trigger for ultimate control● Metal gear box for strength and durability● Tool-less, fast and easy blade change● Livetool Indicator™ glows blue
when plugged into power supply
3 x reciprocating blades
Included as standard
Power input (W) 800Stroke length (mm) 28No load speed (rpm) 500 – 3,000Max. cutting capacity wood (mm) 150Max. cutting capacity aluminium (mm) 12Max. cutting capacity steel (mm) 10Weight (kg) 2.8Supplied in KitboxArticle Number 5133000368EAN Code 48922101112316
RWS1250-G
66mm Circular Saw
● Compact, lightweight and ergonomic design for comfortable, repetitive cutting
● Adjustable base for 0°-45° bevel settings● Adjustable depth setting for efficient cutting● Onboard wrench storage● Livetool Indicator™ glows blue when
plugged into power supply
1 x 20-tooth TCT blade, parallel fence, wrench
Included as standard
Power input (W) 1250Blade diameter (mm) 190Bore size (mm) 16Max. cutting depth 90˚ (mm) 66Max. cutting depth 45˚ (mm) 50Bevel capacity (°) 45°No load speed (rpm) 5,000Weight (kg) 3.7Supplied in −Article Number 5133002243EAN Code 4892210129314
36 | RECIPROCATING SAW & CIRCULAR SAWS
EWS1150RS
55mm Circular Saw
● Adjustable base for 0° to 45° bevel settings● Spindle lock for easy blade change● Adjustable depth setting for efficient cutting● Onboard wrench storage● Livetool Indicator™ glows blue when
plugged into power supply
12-tooth TCT blade, parallel fence
Included as standard
Power input (W) 1150Blade diameter (mm) 170Bore size (mm) 20Max. cutting depth 90˚ (mm) 55Max. cutting depth 45˚ (mm) 38Bevel capacity (°) 45°No load speed (rpm) 5,600Weight (kg) 4.7Supplied in −Article Number 5133000553EAN Code 4892210111470
PT 2014_UK-version 5.8.indd 36 05.08.14 16:30
RMT200-S
200W Multi Tool
● A versatile multi purpose tool with both sanding and cutting heads
● Quick change attachments for hassle free transition between sanding and sawing
● Variable speed for ultimate control across a range of applications
● GripZone™ overmould for a positive grip and improved comfort
1 x flush cutting blade, 1 x wood/metal blade, 1 x sanding pad, 6 x sanding sheets, hex key, universal accessory adaptor
Included as standard
Power input (W) 200Oscilation rate (opm) 10,000-20,000Oscilation angle 3 DegreesWeight (kg) 1.6Supplied in Tool bagArticle Number 5133001819EAN Code 4892210122636
ROS300
Random Orbit Sander
● Powerful 300W motor● Large 2.4mm random orbital base for high levels of
stock removal● Random orbital action for high levels of stock
removal● Compact palm grip handle for added comfort● Cyclonic action dust box for effective dust
collection● Livetool Indicator™ glows blue when plugged into
power supply
5 x quick fix sanding sheets
Included as standard
Power input (W) 300No load speed (rpm) 7,000-12,000Diameter of orbit (mm) 2.4Sanding pad size (mm) 125Weight (kg) 1.7Supplied in −Article Number 5133001145EAN Code 4892210118332
UNIVERSAL
EMS180RV
Multi Pad Sander
● DustTech™ Integrated dust technology system for maximum pick-up efficiency
● 3 unique operational base options (Delta, 1⁄3 sheet & finger)● Unique Integrated Finger to access hard to reach
places● Triangular pad design for sanding up to the edge
in tight corners● 1⁄3 Sheet option to sand large areas quickly
(use either hook and loop or standard paper in clamp)
● Livetool Indicator™ - Glows blue when plugged into the power supply
5 x delta hook & loop pads, 5 x third-sheet hook & loop pads, 5 x finger hook & loop pads
Included as standard
Power input (W) 180Oscilation rate (opm) 0–12,000Diameter of orbit (mm) 2Sanding pad size (mm) -Weight (kg) 1.4Supplied in Tool bagArticle Number 5133000531EAN Code 4892210111692
3-in-1
WOODWORKING | 37
PT 2014_UK-version 5.8.indd 37 05.08.14 16:30
EPS80RS
Palm Sander
● Compact palm grip handle for added comfort● DustTech™ Integrated dust technology system
for maximum pick-up efficiency● Integrated Finger to access hard to reach places● Triangular pad design for sanding up to the edge
in tight corners● Livetool Indicator™ glows blue when plugged
into the power supply
5 x delta sander hook & loop pads, 5 x finger hook & loop pads
Included as standard
Power input (W) 80Oscilation rate (opm) 12,000Diameter of orbit (mm) 1.6Sanding pad size (mm) 99 x 149Weight (kg) 0.9Supplied in Tool bagArticle Number 5133000529EAN Code 4892210111678
38 | WOODWORKING
ESS280RV1⁄3 Sheet Sander
● Powerful cyclonic action technology for maximum dust pick-up efficiency
● Quick-fix hook and loop sanding sheet attachment● Clamping Sheet attachment to maximise sanding
paper choice● Low Vibration for smoother control and finishing● Variable Speed for total sanding control● Livetool Indicator™ glows blue when plugged
into the power supply
2 x 60, 1 x 100 and 1 x 150 grit sanding sheets
Included as standard
Power input (W) 280Oscilation rate (opm) 7,000-12,000Diameter of orbit (mm) 2Sanding pad size (mm) 93 x 185Weight (kg) 1.7Supplied in Tool bagArticle Number 5133000535EAN Code 4892210111739
ESS200RS1⁄3 Sheet Sander
● Powerful cyclonic action technology for maximum dust pick-up efficiency
● Quick-fix hook and loop sanding sheet attachment
● Clamping Sheet attachment to maximise sanding paper choice
● Low Vibration for smoother control and finishing
● Livetool Indicator™ - Glows blue when plugged into the power supply
2 x 60, 1 x 100 and 1 x 150 grit sanding sheets
Included as standard
Power input (W) 200Oscilation rate (opm) 12,000Diameter of orbit (mm) 2Sanding pad size (mm) 93 x 185Weight (kg) 1.5Supplied in −Article Number 5133002245EAN Code 4892210129277
PT 2014_UK-version 5.8.indd 38 05.08.14 16:30
WOODWORKING | 39
EOS2410NHG1⁄4 Sheet Palm Sander
● Powerful 240W motor● Quick-fix hook and loop sanding sheet attachment
with paper clamps● Die-cast aluminium base for strength and
durability● Overmould ON/OFF switch for durability and
ease of use● Compact palm grip handle for added comfort● DustTech™ Integrated dust technology system
for maximum pick-up efficiency● Livetool Indicator™ glows blue when plugged
into power supply
2 x 60, 2 x 100 and 2 x 150 grit sanding sheets, paper punch pad, dust bag
Included as standard
Power input (W) 240Oscilation rate (opm) 14,000Diameter of orbit (mm) 1.6Sanding pad size (mm) 110 x 114Weight (kg) 1.6Supplied in KitboxArticle Number 5133000349EAN Code 4892210111081
EBS800V
76mm (3˝) Belt Sander
● Powerful 800W motor with variable speed for rapid stock removal
● Quick change belt system for easy tracking set-up
● Cyclonic action dust box for effective dust collection
● 4 position adjustable handle● Livetool Indicator™ glows blue when plugged
into power supply
1 x 60 grit sanding sheet, 1 x 100 grit sanding sheet, 1 x 120 grit sanding sheet, 2 x G-clamps, sanding frame, stopper, sanding frame
Included as standard
Power input (W) 800Belt speed (rpm) 150-320Belt width (mm) 76Sanding pad size (mm) 76 x 533Weight (kg) 3.3Supplied in KitboxArticle Number 5133001147EAN Code 4892210118295
EPN7582NHG
750W Planer
● 3 chamfering grooves (0.5,1,1.5mm) in die-cast front shoe for added precision
● Double sided fence for precision planing● Overmould dust extraction switch for left
or right port● Full length trigger with overmould for
greater control● DustTech™ Integrated dust technology
system for maximum pick-up efficiency● Livetool Indicator™ glows blue when plugged
into power supply
2 x TCT blades, dust bag, side fence, wrench
Included as standard
Power input (W) 750Planing depth (mm) 2Planing width (mm) 82Rebate depth (mm) 0-12No load speed (rpm) 16,000Weight (kg) 3.2Supplied in KitboxArticle Number 5133000353EAN Code 4892210111128
PT 2014_UK-version 5.8.indd 39 05.08.14 16:30
ERT1400RV
6.35mm (1⁄4˝) 1400W Router
● Fine height adjustment for precision control and repeatable cutting
● Height adjustment control in table mode● Powerful 1,400 Watt motor with soft start and variable
speed to give user ultimate control● Transparent chip deflector allows you to safely see line
of cut● Livetool Indicator™ - Glows blue when plugged into the
power supply
Parallel guide, template guide, dust port, 1 x 6mm collet, 1 x 6.35mm collet, 1 x 8mm collet, 1 x wrench, 1 x parallel guide, 1 x template guide
Included as standard
Power input (W) 1400No load speed (rpm) 14,000 – 31,500Collet capacity (mm) 6, 6.35 & 8Plunge capacity (mm) 55Weight (kg) –Supplied in KitboxArticle Number 5133000555EAN Code 4892210111838
EHG2000
Heat Gun
● Removable front heat shield allows easy access to change accessories
● Overheat protection sensor● Two air flow settings● Two heat settings 60 / 600°C● Convenient hanging hook
Included as standard
Power input (W) 2000Air flow (l/min) 250/500 l/minWeight (kg) 0.7Supplied in −Article Number 5133001138EAN Code 4892210118158
2 x nozzles
EMS254L
254mm (10˝) Compact Slide Mitre Saw with Laser
● Exactline Laser Technology™ for cutting accuracy● 2 LED's for maximum work area illumination● Forward sliding bars allow users to work up against a wall● Easily stored and transported thanks to ultra compact design● Powerful 2000 Watt motor, producing 4.500rpm● Extra wide side extensions to support large timber● 50 degree left and right mitre capacity
Included as standard24-tooth TCT blade, extensions, 1 x clamp, dust bag, wrench
Power input (W) 2000Blade diameter (mm) 254Blade type 48-tooth TCTNo load speed (rpm) 4,500Mitre capacity left (˚) 50Mitre capacity right (˚) 50Bevel capacity left (˚) 47Bevel capacity right (˚) 2Weight (kg) 16.2Supplied in −Article Number 5133001203EAN Code 4892210119155
Max. cutting capacity: 90° mitre / 90° bevel 300 x 90mm 90° mitre / 45° bevel 300 x 58mm 45° mitre / 90° bevel 200 x 90mm 45° mitre / 45° bevel 200 x 58mm
40 | WOODWORKING
PT 2014_UK-version 5.8.indd 40 05.08.14 16:30
EMS216L
216mm (71⁄5˝) Compact Slide Mitre Saw with Laser
● Exactline Laser Technology™ for cutting accuracy● 2 LED’s for maximum work area illumination● Forward sliding bars allow users to work up
against a wall● Easily stored and transported thanks to ultra
compact design● Powerful 1500 Watt motor, producing 4,500rpm● Extra wide side extensions to support large timber● 50 degree left and right mitre capacity
48-tooth TCT blade, extensions, 1 x clamp, dust bag, wrench
Included as standard
Power input (W) 1500Blade diameter (mm) 216Blade type 48-tooth TCTNo load speed (rpm) 5000Mitre capacity left (˚) 50Mitre capacity right (˚) 50Bevel capacity left (˚) 47Bevel capacity right (˚) 2Weight (kg) 13Supplied in −Article Number 5133001257EAN Code 4892210119377
Max. cutting capacity: 90° mitre / 90° bevel 70 x 270mm 90° mitre / 45° bevel 48 x 270mm 45° mitre / 90° bevel 70 x 185mm 45° mitre / 45° bevel 48 x 185mm
Included as standard
RTS1800EF-G
1800W Table Saw
● Poweful 1800W motor for easy cutting● Die cast aluminium table for perfect support and accurate cutting● Extendable side fence allows increased material support up to 510mm● Front and rear locking side fence for accurate
and precise cutting● Dual purpose handle for quick and easy
height and/ or bevel adjustment● Overload protection ensures long term
durability and added safety● Soft start ensures the product is easy to use
and protects long term durability● Mitre gauge allows precise angle to be cut
quickly and easily between +60° and -60°● Built in tool box for additional accessory
storage● Deluxe collapsible stand with wheels for easy
storage and transportation● LiveTool Indicator™ glows blue when plugged
into the power supply
48-tooth TCT blade, Deluxe collapsible stand
Power input (W) 1,800No load speed (rpm) 4,500Blade width (mm) 254Blade type 48-tooth TCTBore size (mm) 30Max. cutting depth 45˚ (mm) 58Max. cutting depth 90˚ (mm) 84
Table dimensions with extensions (mm)
560 x 710
Weight (kg) 26.8kgSupplied in −Article Number 5133002026EAN Code 4892210126009
NEW
WOODWORKING | 41
PT 2014_UK-version 5.8.indd 41 05.08.14 16:30
RWB02
Adjustable Folding Work Bench
● Quality bamboo provides a great and naturally durable work surface
● Pivoting boards for heavy duty clamping
● Quick guide measurements● Foldable for easy storage and
portability● Multiple clamp settings
4 x clamps, spanner
Included as standard
Dimensions (mm) 605 x 120 x 180Weight (kg) 6.5Supplied in −Article Number 5133001779EAN Code 4892210121721
RWB03
Adjustable Metal Folding Work Bench
● Four position tiliting work surface (0°, 25°, 50°, 80°)● Seven level height adjustment to suit all
applications● Steel and aluminium work surface● Quick release lift boards for increased
clamping area● Sliding clamping system for maximum
versatility ● Foldable work bench for easy storage and
portability
4 x clamps, spanner
Included as standard
Dimensions (mm) 600 x 570 x 760Weight (kg) tbcSupplied in −Article Number 5133001780EAN Code 4892210121738
42 | WORK BENCHES
PT 2014_UK-version 5.8.indd 42 05.08.14 16:31
ACCESSORY SETS | 43
RAK30MIX
30 Piece Mixed Set
Contains● 9 x 25mm Screwdriver Bits 3 x Philips (PH1 – PH3) 3 x Pozidrive (PZ1 – PZ3) 3 x Slotted (4mm – 6mm)
● 1 x 60mm Magnetic Bit Holder● 4 x Non Magnetic Nut Drivers 1 x 6mm, 1 x 8mm, 1 x 10mm, 1 x 12mm
● 5 x Wood Boring Brad Point Drill Bits 1 x 3mm, 1 x 4mm, 1 x 5mm, 1 x 6mm, 1 x 8mm
● 5 x Masonry Drill Bits 1 x 5mm, 1 x 5,5mm, 1 x 6mm, 1 x 6,5mm, 1 x 7mm
● 6 x HSS Drill Bits 1 x 2mm, 1 x 2,5mm, 1 x 3mm, 1 x 4mm, 1 x 5mm, 1 x 6mm
Art.-No.: 5132002254EAN Code: 4892210113375
RAK22QC
22 Piece Quick-Change Set
Contains● 6 x 25mm Screwdriver Bits 3 x Philips (PH1 – PH3) 3 x Slotted (4mm – 6mm)
● 7 x 50mm Screwdriver Bits 3 x Philips (PH1 – PH3) 1 x Pozidrive (PZ2) 3 x Slotted (4mm – 6mm)
● 1 x Quick Change Chuck● 3 x Masonry Drill Bits (Hex Shank) 1 x 5mm, 2 x 6mm
● 1 x 80mm Stubby Screw Guide● 4 x HSS Drill Bits (2 – 5mm)
RAK40SD
40 Piece Driving Set
Contains● 32 x 25mm Screwdriver Bits 4 x Philips (PH1 – PH3) 6 x Pozidrive (PZ1 – PZ3) 4 x Hex (3mm – 6mm) 4 x Slotted (5mm – 7mm) 14 x Torx® (TX6 – TX40)
● 7 x 50mm Screwdriver Bits 2 x Philips (PH1 – PH2) 2 x Pozidrive (PZ1 – PZ2) 3 x Torx® (TX10 – TX20)
● 1 x 60mm Magnetic Bit Holder
Art.-No.: 5132002253EAN Code: 4892210113368
Art.-No.: 5132002257EAN Code: 4892210113337
RAK17SDC
17pcs Colour Coded Screwdriver Accessory Kit
Contains● Mini Quick Change Chuck x 1● 25mm screwdriving bits x 13 Hex 3 x 1, Hex 4 x 1, Hex 5 x 1, PH1 x 1, PH2 x 1, PH3 x 1 PZ1 x 1, PZ2 x 1, PZ3 x 1, SL3 x 1, SL4 x 1, SL5 x 2
● 25mm Security bits x 3 TR-15 x 1, TR-20 x 1, TR-25 x 1
Art.-No.: 5132002682EAN Code: 4892210127198
NEWRAK16FP
16pcs Flat Pack Furniture Accessory Kit
Contains● 25mm screwdriver bits x 15 Hex 4 x 2, Hex 5 x 2, Hex 6 x 1, PH1 x 1, PH2 x 1, PH3 x 1 PZ1 x 1, PZ2 x 2, PZ3 x 2, SL4 x 1, SL5 x 1
● Magnetic Bit holder (60mm) x 1
Art.-No.: 513200267EAN Code: 4892210126849
RAK40SDI
40pcs Impact Rated Screwdriving Accessory Kit
Contains● Magnetic bit holder x 1 60mm x 1
● 25mm impact driving bits x 32 Hex 3 x 1, Hex 4 x 1, Hex 5 x 1, Hex 6 x 1, PH1 x 1, PH2 x 2, PH3 x 1, PZ1 x 2, PZ2 x 2, PZ3 x 2, SL5 x 1, SL6 x 2, SL7 x 1, TX-6 x 1, TX-7 x 1, TX-8 x 1, TX-9 x 1, TR-10 x 2, TR-15 x 2, TR-20 x 2, TR-25 x 2, TX-30 x 1, TX-40 x 1
● 50mm impact driving bits x 7 PH1 x 1, PH2 x 1, PZ1 x1, PZ2 x 1, TX-10 x 1, TX-15 x 1, TX-20 x
Art.-No.: 5132002683EAN Code: 4892210127204
PT 2014_UK-version 5.8.indd 43 05.08.14 16:31
44 | ACCESSORY SETS
Contains● 10 x Masonry Drill Bits 1 x 4mm, 1 x 5mm, 1 x 5,5mm, 2 x 6mm, 1 x 7mm, 2 x 8mm, 1 x 9mm, 1 x 10mm
Contains● 19 x HSS Drill Bits 1 x 2mm, 2 x 2,5mm, 2 x 3mm, 2 x 3,5mm, 2 x 4mm, 2 x 4,5mm, 2 x 5mm, 2 x 6mm, 1 x 7mm, 1 x 8mm, 1 x 9mm, 1 x 10mm
Art.-No.: 5132002258EAN Code: 4892210113290
Art.-No.: 5132002260EAN Code: 4892210113283
Contains● 1 x 5mm SDS Bit● 2 x 5,5mm SDS Bit● 1 x 6mm SDS Bit● 1 x 7mm SDS Bit● 1 x 8mm SDS Bit● 1 x 10mm SDS Bit● 1 x 12mm SDS Bit
Art.-No.: 5132002262EAN Code: 4892210113276
RAK10MB
10 Piece Masonary Bit Set
RAK19HSS
19 Piece HSS Bit Set
RAK08SDS
8 Piece SDS-Plus Masonary Bit Set
RAK08QRB
10 Piece Router Bit Set
RAK08BP
8 Piece Brad Point Bit Set
RAK07SB
7 Piece Spade Bit Set
Contains● 7 x Flatwood Spade Bits 1 x 10mm, 1 x 13mm, 1 x 16mm, 1 x 20mm, 1 x 22mm, 1 x 25mm, 1 x 32mm
Contains● 1 x 1⁄4˝ (6,4mm) Straight Cutter● 1 x 1⁄2˝ (12,7mm) Straight Cutter● 1 x 3⁄4˝ (19,05mm) Straight Cutter● 1 x 1⁄2˝ (12,7mm) Core Box Cutter● 1 x 1⁄4˝ (6,4mm) Roundover Cutter● 1 x 3⁄8˝ (9,5mm) Roundover Cutter● 1 x 1⁄2˝ (12,7mm) Dovetail Cutter● 1 x 5⁄32˝ (3,97mm) Roman Ogee Cutter● 1 x Allen key● 1 x 3⁄8˝ Bearing Washer
Contains● 8 x Wood Boring Brad Point Drill Bits (1 – 10mm)
Art.-No.: 5132002259EAN Code: 4892210113306
Art.-No.: 5132002252EAN Code: 4892210113351
Art.-No.: 5132002255EAN Code: 4892210113344
PT 2014_UK-version 5.8.indd 44 05.08.14 16:31
RAK46MIX
46pcs Mixed Accessory Kit
Contains● Masonry Drill bits x 3 3mm x 1, 6mm x 1, 8mm x 1
● HSS Drill Bits (titanium) x 11 1.5mm x 1, 2mm x 1, 2,5mm x 1, 3mm x 1, 3.5mm x 1, 4mm x 1, 4.5 x 1, 5mm x 1, 5.5mm x 1, 6mm x 1, 6.5mm x 1
● Magnetic bit holder x 1 60mm x 1
● 25mm screwdriving bits x 25 Hex 3 x 1, Hex 4 x 1, Hex 5 x 1, PH0 x 1, PH1 x 2, PH2 x 3, PH3 x 1, PZ0 x 1, PZ1 x 2, PZ2 x 3, PZ3 x 1, SL3 x 1, SL4 x 1, SL5 x 1, SL6 x 1, TR-20 x 1, TR-25 x 1, TX-10 x 1, TX-15 x 1, TX-20 x 1, TX-25 x 1, TX-30 x 1, TX-40 x 1, SQ1 x 1, SQ2 x 1
Art.-No.: 5132002686EAN Code: 4892210127464
ACCESSORY SETS | 45
RAK86MIX
86pcs Mixed Accessory Kit
Contains● Masonry Drill Bits x 9 3mm x 1, mm x 1, 5mm x 2, 6mm x 2, 8mm x 2, 10mm x 1
● Wood-boring bradpoint drill bits x 9 3mm x 1, mm x 1, 5mm x 2, 6mm x 2, 8mm x 2, 10mm x 1
● HSS Drill Bits (Titanium) x 11 1.5mm x 1, 2mm x 1, 2,5mm x 1, 3mm x 1, 3.5mm x 1, 4mm x 1, 4.5 x 1, 5mm x 1, 5.5mm x 1, 6mm x 1, 6.5mm x 1
● Flatwood Spade Bits x 2 16mm x 1, 22mm x 1
● Magnetic Bit Holder x 1 60mm x 1● 25mm Screwdriving Bits x 54 Hex 1.5 x 1, Hex 2 x 1, Hex 2. x 1, Hex 3 x 1, Hex 4 x 1, Hex 5 x 1, Hex 5.5 x 1, Hex 6 x 1, PH0 x 1, PH1 x 2, PH2 x 3, PH3 x 2, PZ0 x 1, PZ1 x 2, PZ2 x 4, PZ3 x 2, SL3 x 1, SL4 x 2, SL5 x 1, SL6 x 1, SL7 x 2, TR-10 x 1, TR-15 x 1, TR-20 x 1, TR-25 x 1, TR-27 x 1, TR-30 x 1, TR-40 x 1, TX-10 x 1, TX-15 x 2, TX-20 x 2, TX-25 x 2, TX-27 x 2, TX-30 x 2, TX-40 x 1, SQ1 x 1, SQ2 x 1, SQ3 x 1
Art.-No.: 5132002688EAN Code: 4892210127488
RAK69MIX
69pcs Mixed Accessory Kit
Contains● Masonry Dril Bits x 6 3mm x 1, 4mm x 1, 5mm x 1, 6mm x 1, 8mm x 1, 10mm x 1
● Wood-boring bradpoint drill bits x 6 3mm x 1, 4mm x 1, 5mm x 1, 6mm x 1, 8mm x 1, 10mm x 1
● HSS Drill Bits (Titanium) x 11 1.5mm x 1, 2mm x 1, 2,5mm x 1, 3mm x 1, 3.5mm x 1, 4mm x 1, 4.5 x 1, 5mm x 1, 5.5mm x 1, 6mm x 1, 6.5mm x 1
● Flatwood Spade Bits x 2 16mm x 1, 22mm x 1
● Magnetic Bit Holder x 1 60mm x1
● 25mm screwdriving bits x 43 Hex 1.5 x 1, Hex 2 x 1, Hex 2.5 x 1, Hex 3 x 1, Hex 4 x 1, Hex 5 x 1, Hex 6 x 1, PH0 x 1, PH1 x 2, PH2 x 3, PH3 x 2, PZ0 x 1, PZ1 x 2, PZ2 x 5, PZ3 x 2, SL3 x 1, SL4 x 1, SL5 x 1, SL6 x 1, SL7 x 1, TR-10 x 1, TR-15 x 1, TR-20 x 1, TR-25 x 1, TX-10 x 1, TX-15 x 1, TX-20 x 1, TX-25 x 1, TX-30 x 1, TX-40 x 1, SQ1 x 1, SQ2 x 1, SQ3 x 1
Art.-No.: 5132002687EAN Code: 4892210127471
PT 2014_UK-version 5.8.indd 45 05.08.14 16:31
46 | ACCESSORY SETS
Contains● 1 x 100mm Thin Recip Saw Blade Medium-thick metal cutting 14TPI
● 6 x 6˝ (152mm) Recip Saw Blade 1 x Wood cutting 10TPI, 1 x Metal cutting 24TPI 1 x Metal cutting 14TPI, 1 x Pruning blade 4 – 5TPI 1 x Universal cutting 10TPI
Contains● 5 x Hole saws 1 x 1–1⁄4˝ (32mm), 1 x 1–1⁄2˝ (38mm), 1 x 1–3⁄4˝ (45mm), 1 x 2˝ (50mm), 1 x 2–1⁄8˝ (54mm)
● 1 x Mandrel ● 1 x Allen key
Contains● 1 x 102mm Flush Cut (10 TPI)● 2 x 102mm Reverse Cut (10 TPI)● 2 x 102mm Scroll Cut (14 TPI)
Art.-No.: 5132002547EAN Code: 4892210119285
Art.-No.: 5132002548EAN Code: 4892210119292
Art.-No.: 5132002697EAN Code: 4892210128966
RAK06RB
6 Piece Recip Blade Kit
RAK07HS
7 Piece Hole Saw Kit
RAK05JSBFC
5 Piece Jigsaw Blade Kit
RAK13MT
13 Piece Multi Tool Accessory Set
RAK02MT
2 Piece Multi Tool Blade Set
RAK10MT
10 Piece Multi Tool Sanding Set
Contains● 1 x Flush Cut Wood / Metal Blade 3-1⁄2˝ (~89mm)
● 1 x 1-1⁄8˝ Plunge Cut Wood / Metal Blade 1-1⁄8˝ (~29mm)
● 1 x Scraper Blade 2˝ (~50mm)
● Sanding Paper (for wood) 3 x Grit 60, 3 x Grit 80, 4 x Grit 120
Contains● 1 x Flush Cut Wood / Metal Blade 3-1⁄2˝ (~89mm)
● 1 x 1-1⁄8˝ Plunge Cut Wood / Metal Blade 1-1⁄8˝ (~29mm)
Art.-No.: 5132002599EAN Code: 4892210120809
Art.-No.: 5132002595EAN Code: 4892210120816
Contains● Sanding Paper (for wood) 3 x Grit 60, 3 x Grit 80, 4 x Grit 120
Art.-No.: 5132002600EAN Code: 4892210120823
NEW
PT 2014_UK-version 5.8.indd 46 05.08.14 16:31
ACCESSORY SETS | 47
PB82A2
2 Piece 82mm Planer Blade Set
RO125A10
10 Piece 125mm Sanding Discs for Random Orbit Sanders
RAK03SR
3 Piece Saw Rail
PB50A2
3 Piece 50mm Planer Blade Set
BSS76A2
2 Piece 3˝ Sanding Belt Set
For further Ryobi® product information, please go online to www.ryobitools.co.uk
Contains● 3 x 50 Replacement Planer Blades Fits: CPL180M / CPL180MHG
Contains● 3 x Guide Rail Assembly ~408mm (length)
● 2 x Clamp Assembly
Contains● 10 x 125mm RO Sanding Disc 2 x Grit 100, 3 x Grit 120, 3 x Grit 240, 2 x Grit 320
Contains● 2 x 82mm (length) Planer Blade
Contains● 2 x 3˝ (~76mm) Sanding Belt 1 x Grit 60, 1 x Grit 80
Art.-No.: 5132002602EAN Code: 4892210120878 Art.-No.: 5132002674
EAN Code: 4892210125071
Art.-No.: 5132002596EAN Code: 4892210120847
Art.-No.: 5132002597EAN Code: 4892210120861
Art.-No.: 5132002608EAN Code: 4892210121257
Contains● 1 x 102mm Flush Cut (10 TPI)● 2 x 102mm Reverse Cut (10 TPI)● 2 x 102mm Scroll Cut (14 TPI)
PT 2014_UK-version 5.8.indd 47 05.08.14 16:31
Blades
Tool BagsModel No. Dimensions Description
UTB2 Size: 355 x 203 x 279mm ONE+ Canvas Tool Bag UTB4 Size: 460 x 305 x 305mm Medium Heavy Duty Contractors Tool Bag
Model No. Description Fits Models
SB254T48A1 254mm 48 tooth TCT Mitre Saw Blade EMS254L / ETMS1825HG / ETS1825HG / ETS1525SCHG / ETS1526ALHG / ETS1526HGSB254T24A1 254mm 24 tooth TCT Mitre Saw Blade EMS254L / ETMS1825HG / ETS1825HG / ETS1525SCHG / ETS1526ALHG / ETS1526HGSB216T48A1 216mm 48 tooth TCT Mitre Saw Blade EMS216LSB216T24A1 216mm 24 tooth TCT Mitre Saw Blade EMS216LCSB150A1 150mm circular saw blade (18-tooth, 10mm bore) LCS180 / RWSL1801CBS170A1 170mm circular saw blade (12-tooth, 20mm bore) EWS1150RSCSB190A1 190mm circular saw blade (18-tooth, 16mm bore) EWS1266HG / RWS1250 / RWS1400 / RWS1600TSBA1 4˝ (102mm) tile saw blade LTS180MPB82A2 2 pack 82mm planer blades EPN7582NHG / EPN6082CHGPB50A2 2 pack 50mm planer blades CPL180MHGRAK-0001PB 2 pack 50mm planer blades CPL180MHG
48 | ACCESSORY SETS
Sanding Accessories
Model No. Description Fits Models
ASP00102 10 x assorted sanding sheets CCC180MSMS30A 30 piece multi sand sheets EMS180RVSPS20A 20 piece palm sand sheets EPS80RS
PT 2014_UK-version 5.8.indd 48 05.08.14 16:31
INDEX | 49
IndexContents / Key 3
New from Ryobi® 4 – 5 / 14
18V ONE+™ Battery Technology 6 – 7
Cordless Power Tools 8 – 31
ONE+™ 18V Tools 9 – 19
LLCDI18022 18V 2-Speed Hammer Drill/Driver 10
RCD18021L 18V 2-Speed Drill/Driver 10
RCD1802M 18V 2-Speed Drill/Driver 10
LCDI1802M 18V 2-Speed Hammer Drill/Driver 10
CDC1802M 18V 2-Speed Drill/Driver 11
CRH1801M 18V SDS+ Hammer Drill 11
RAD1801M 18V Right Angle Drill 11
RID1801M 18V Impact Driver 12
BIW180M 18V Impact Wrench 12
RMT1801M 18V Multi Tool 12
RWSL1801M 18V Circular Saw 13
RRS1801M 18V Reciprocating Saw 13
R18JS-0 18V Jigsaw 13
R18N18G-0 18V Gauge Nailer 15
R18N16G-0 18V Gauge Nailer 15
R18AG-0 18V Angle Grinder 15
EMS190DCL 18V Mitre Saw 16
R18I-0 18V Inflator 16
LTS180M 18V Tile Saw 16
CPL180M 18V Planer 17
CRO180M 18V 125mm Random Orbit Sander 17
CCC1801M 18V Corner Sander 17
CCG1801M 18V Caulking Gun 18
CHV182M 18V Hand Vac 18
CDR180M 18V MP3 Compatible Radio 18
RFL180M 18V Flashlight 19
P620 18V Speed Sprayer 19
ONE+™ 18V Cordless Lawn & Garden Tools 20 – 25
RLM18X40H240 18V Lithium Fusion™ Lawnmower 21
RLT1830H13 18V Hybrid Line Trimmer 22
RLT1825Li 18V Line Trimmer 22
OLT1831S 18V Line Trimmer 23
RHT1851R15 18V Hedge Trimmer 23
OHT1855R 18V Hedge Trimmer 24
OHT1850X 18V Long Reach Hedge Cutter 24
OPP1820 18V Pole Saw 25
OBL1802 18V Blower 25
12V Tools 26 – 27
RCD12011L 12V Drill Driver 26
RMT12011L 12V Multi tool 27
R12PS-L13S 12V Palm Sander 27
RRS12011L 12V Multi Purpose Saw 27
4V Tools 28 – 29
CSD4107BG 4V Lithium-Ion Screwdriver 29
CSD4130GN 4V Lithium-Ion screwdriver 29
Battery & Charger Summary 30 – 31
Corded Power Tools 32 – 42
RPD1200-K 1200W Percussion Drill 33
RPD800-K 800W Percussion Drill 33
RPD500-G 500W Percussion Drill 33
ERH710RS 710W SDS-Plus Rotary Hammer Drill 34
EAG2000RS Large Angle Grinder 34
EAG750RS Small Angle Grinder 34
EAG600RS Small Angle Grinder 35
RJS1050-K 680W Jigsaw 35
RJS750-G 500W Jigsaw 35
ERS80VHG Reciprocating Saw 36
RWS1250-G 66mm Circular Saw 36
EWS1150RS 55mm Circular Saw 36
RMT200-S 200W Multi Tool 37
ROS300 Random Orbit Sander 37
EMS180RV Multi Pad Sander 37
EPS80RS Palm Sander 38
ESS280RV 1⁄3 Sheet Sander 38
ESS200RS 1⁄3 Sheet Sander 38
EOS2410NHG 1⁄4 Sheet Palm Sander 39
EBS800V 76mm (3˝) Belt Sander 39
EPN7582NHG 750W Planer 39
ERT1400RV 6.35mm (1⁄4˝) 1400W Router 40
EHG2000 Heat Gun 40
EMS254L 254mm (10˝) Compact Slide Mitre Saw with Laser 40
EMS216L 216mm (71⁄5˝) Compact Slide Mitre Saw with Laser 41
RTS1800EF-G 1800W Table Saw 41
RWB02 Adjustable Folding Work Bench 42
RWB03 Adjustable Metal Folding Work Bench 42
Accessories 43 – 48
PT 2014_UK-version 5.8.indd 49 05.08.14 16:31
50 | NOTES
PT 2014_UK-version 5.8.indd 50 05.08.14 16:31
NOTES | 51
PT 2014_UK-version 5.8.indd 51 05.08.14 16:31
NEW
Dealer stamp:
Content of the catalogue is correct at time of going to print. Ryobi reserve the right to change images and prices without prior notice. The use of the trademark RYOBI® is pursuant to a license granted by Ryobi Limited.5139000539
ryobitoolsuk
Ryobi Technologies (UK) Limited1st Floor Unit 3 Globeside Business Park, Fieldhouse Lane, Marlow, Bucks, SL71HZTel: +44 (0) 1628 894 400 Fax: +44 (0) 1628 894 401Email: [email protected]: www.ryobitools.co.uk
Technical helpline: +44 (0) 800 389 0305For your nearest local service centre please contact customer services on: +44 (0) 1628 894 400
PT 2014_UK-version 5.8.indd 52 05.08.14 16:31