RWB WindmillsThis Jelly Roll friendly quilt is based on an antique quilt found oneBay.

My first version will be multicolored like the quilt above but I plan tomake another one in RWB to donate to a veteran. Because Iʼm using asingle background fabric, I will use 32 strips from my Jelly Roll and alittle less than 2.5 yards of my background fabric.

https://maryquilts.com/rwb-windmills/ 11/13/18, 9=46 PMPage 1 of 4

Quilt Size = 56 x 72

Block Size = 8 inches finished (8.5 inches with seam allowances)

Blocks are set 7 blocks across and 9 rows down

Quilt Notes

Each strip set is made from one blue or red 2.5 inch strip and

https://maryquilts.com/rwb-windmills/ 11/13/18, 9=46 PMPage 2 of 4

one 2.5 inch background strip and will make 2 blocks.If using a single background fabric, 2.5 yards should be plenty

You will make 32 BLUE blocks.

Sew a 2.5 inch blue strip to a 2.5 inch background strip and press tothe blue. Sub-cut the strip set into (8) segments 4.5 inches each.

https://maryquilts.com/rwb-windmills/ 11/13/18, 9=46 PMPage 3 of 4

Arrange 4 segments as show below and sew together, pressing in thedirection of the arrows, repeat for the 2nd block.

Following the same steps above, make 31 RED blocks.

Starting with a blue block, alternate blue and red blocks as shownabove in the quilt drawing. Since the final seam for all your blockswas pressed up, you will flip the red blocks upside down with theseam going down so your blocks will nestle nicely when assemblingthe top. This quilt has no borders and is bound in blue.

(C) Mary Johnson – 2018 – MaryQuilts.com

https://maryquilts.com/rwb-windmills/ 11/13/18, 9=46 PMPage 4 of 4